Section 10 ontain-it Secondary ontainment Piping System
Glossary S = ontain-it Socket SPG = Spigot End (same dimension as pipe outside diameter) MPT = Male Pipe Thread FPT = Female Pipe Thread Product ine Description 39 Fittings 41 Pipe 42 Accessories The technical information given in this publication implies no warranty of any kind and is subject to change without notice. Please consult our Terms and onditions of Sale. Not for Use with ompressed Air or Gases DO NOT TEST with Air or Air over ater GF Piping DOES NOT REOMMEND the use of thermoplastic piping products for systems to transport or store compressed air or gases, or the testing of thermoplastic piping systems with compressed air or gases in above or below ground locations. The use of GF Piping products in compressed air or gas systems automatically voids the warranty for such products, and their use against our recommendation is entirely the responsibility and liability of the installer. GF Piping will not accept responsibility for damage or impairment from its products, or other consequential or incidental damages caused by misapplication, incorrect assembly, and/or exposure to harmful substances or conditions. The only exception to this recommendation is when testing the ontain-it Secondary System or the Fuseal Squared Double ontainment Piping System s containment joints.
Page ontain-it Pipe 10.4 ontain-it Fittings 10.5 ontain-it Terminations 10.9 ontain-it entralizers 10.11 ontain-it Accessories 10.12 10.3
ontain-it Pipe Split Pipe lengths [ft] Part No. USD/ft ift [ft] Minimum Order [ft] Minimum 4 10 37015040 * 20.32 360 60 4.215 3.525 6 10 37015060 * 42.46 120 20 6.275 5.375 Solid Pipe lengths [ft] Part No. USD/ft ift [ft] Minimum Order [ft] Minimum 4 20 37026040 * 11.52 520 20 4.215 3.882 6 20 37026060 * 24.26 340 20 6.275 5.782 10.4
ontain-it Fittings ontainment oupling - Standard, Split (S x S) G 4 4629-040 80.08 5 2.00 0.38 4.38 5.81 4.69 3.88 6 4629-060 120.12 5 2.75 0.38 5.81 8.19 6.88 5.97 ontainment oupling - Extended, Split (S x S) Maximum Gap: 5.50" 4 4629-040E 88.58 5 5.00 10.00 5.81 4.69 3.88 6 4629-060E 127.40 5 5.75 11.50 8.19 6.88 5.97 ontainment oupling - Reducing, Split (S x S) 1 2 6 x 4 4629-532 160.16 5 2.00 2.75 5.81 8.19 6.88 5.97 10.5
ontainment 90 Ell, Split (SxS) G 4 4606-040 104.34 5 2.00 2.44 5.81 4.69 3.88 6 4606-060 160.16 5 2.75 3.38 8.19 6.88 5.97 ontainment 45 Ell, Split (S x S) G 4 4617-040 104.34 5 2.00 1.00 5.81 4.69 3.88 6 4617-060 160.16 5 2.75 1.75 8.19 6.88 5.97 ontainment Tee, Split (S x S x S) G H 4 4601-040 121.34 5 2.00 2.38 7.19 8.63 5.81 4.69 3.88 6 4601-060 175.94 5 2.75 3.44 10.25 12.44 8.19 6.88 5.97 10.6
ontainment 45 ye, Split (S x S x S) G GJ N I. D. 4 4683-040 160.16 5 2.00 0.75 5.88 11.00 7.13 5.81 4.69 3.88 6 4683-060 230.54 5 2.75 1.81 7.75 15.19 9.75 8.19 6.88 5.97 ontainment ap, One Piece (S) 4 4647-040 65.52 5 1.75 1.94 4.50 6 4647-060 95.86 5 2.75 3.19 6.75 ontainment Female Adapter, One Piece (S x FPT) 4 4635-040 80.08 5 1.75 3.18 5.00 6 4635-060 121.34 5 3.00 5.00 6.75 10.7
Plug, One Piece (MPT) 4 4650-040 65.52 5 6 4650-060 95.86 5 Adapter Sleeve, One Piece (IPS Spg x S) 4 x 4 4687-040 65.52 10 6 x 6 4687-060 95.86 10 ontainment PPFR Floor Drain, One Piece (IPS Spg x MPT) For use with Fuseal primary piping only. Must use 4635-060 for ontain-it transition. Part No. USD 3 x 6 46104-530 * 825.06 4 x 6 46104-532 * 825.06 10.8
ontain-it Terminations Termination Fitting - Rigid PV, Split (S to IPS) Part No. USD 4 x 1 2 4628-415 * 134.68 2.00 4.44 5.81 4.69 3.88 4 x 3 4 4628-416 * 134.68 2.00 4.44 5.81 4.69 3.88 4 x 1 4628-417 * 134.68 2.00 4.44 5.81 4.69 3.88 4 x 1 1 4 4628-418 * 134.68 2.00 4.44 5.81 4.69 3.88 4 x 1 1 2 4628-419 134.68 2.00 4.44 5.81 4.69 3.88 4 x 2 4628-420 134.68 2.00 4.44 5.81 4.69 3.88 6 x 2 1 2 4628-529 * 194.14 2.75 5.81 8.19 6.88 5.97 6 x 3 4628-530 194.14 2.75 5.81 8.19 6.88 5.97 6 x 4 4628-532 194.14 2.75 5.81 8.19 6.88 5.97 Test Termination Fitting - Rigid PV, Split (S to IPS) Part No. USD 4 x 2 4628-420T 140.74 2.00 4.44 5.81 4.69 3.88 6 x 4 4628-532T 200.20 2.75 5.81 8.19 6.88 5.97 Termination Fitting - Flexible Alcryn, One Piece ontain-it to IPS/Metric [mm] Part No. USD 4 x 1 2 20 4628-415A 80.08 4 x 3 4 25 4628-416A 80.08 4 x 1 32 4628-417A 80.08 4 x 1 1 4 40 4628-418A 80.08 4 x 1 1 2 50 4628-419A 80.08 4 x 2 63 4628-420A 80.08 6 x 2 1 2 75 4628-529A 236.60 6 x 3 90 4628-530A 236.60 6 x 4 110 4628-532A 236.60 10.9
Test Termination Fitting - Flexible Alcryn, One Piece ontain-it to IPS/Metric [mm] Part No. USD 4 x 1 2 20 4628-415AT 86.14 4 x 3 4 25 4628-416AT 86.14 4 x 1 32 4628-417AT 86.14 4 x 1 1 4 40 4628-418AT 86.14 4 x 1 1 2 50 4628-419AT 86.14 4 x 2 63 4628-420AT 86.14 6 x 2 1 2 75 4628-529AT 242.66 6 x 3 90 4628-530AT 242.66 6 x 4 110 4628-532AT 242.66 Termination Fitting - Flexible Alcryn, One Piece ontain-it to opper Tube Part No. USD 4 x 1 2 4628-415A 80.08 4 x 3 4 4628-416A 80.08 4 x 1 4628-417A 80.08 4 x 1 1 4 4628-418A 80.08 4 x 1 1 2 4628-419A 80.08 4 x 2 4628-420A 80.08 6 x 2 4628-528A 212.94 6 x 2 1 2 4628-529A 236.60 6 x 3 4628-530A 236.60 6 x 4 4628-532A 236.60 Test Termination Fitting - Flexible Alcryn, One Piece ontain-it to opper Tube Part No. USD 4 & 1 2 4628-415AT 86.14 4 & 3 4 4628-416AT 86.14 4 & 1 4628-417AT 86.14 4 & 1 1 4 4628-418AT 86.14 4 & 1 1 2 4628-419AT 86.14 4 & 2 4628-420AT 86.14 6 & 2 4628-528AT 218.40 6 & 2 1 2 4628-529AT 242.66 6 & 3 4628-530AT 242.66 6 & 4 4628-532AT 242.66 10.10
ontain-it entralizers entralizer (ontain-it x IPS) d 4 x 1 2 4686-415 * 41.26 25 4 x 3 4 4686-416 * 41.26 25 4 x 1 4686-417 * 18.20 25 4 x 1 1 4 4686-418 * 41.26 25 4 x 1 1 2 4686-419 * 18.20 25 4 x 2 4686-420 * 18.20 25 6 x 2 1 2 4686-529 * 55.82 25 6 x 3 4686-530 * 24.26 25 6 x 4 4686-532 * 24.26 25 6 x 1 2 Twin 4686-811 * 134.68 5 6 x 3 4 Twin 4686-813 * 134.68 5 6 x 1 Twin 4686-815 * 134.68 5 entralizer (ontain-it x opper Tube ) 4 x 1 2 4686-415 * 41.26 10 4 x 3 4 4686-416 * 41.26 10 4 x 1 4686-417 * 41.26 10 4 x 1 1 4 4686-418 * 41.26 10 4 x 1 1 2 4686-419 * 41.26 10 4 x 2 4686-420 * 41.26 10 6 x 2 4686-528 * 53.67 10 6 x 2 1 2 4686-529 * 55.82 10 6 x 3 4686-530 * 55.82 10 6 x 4 4686-532 * 55.82 10 entralizer (ontain-it x Metric) d 4 x 20 4686-712 * 41.26 25 4 x 25 4686-713 * 41.26 25 4 x 32 4686-714 * 41.26 25 4 x 40 4686-715 * 41.26 25 4 x 50 4686-716 * 41.26 25 4 x 63 4686-717 * 41.26 25 6 x 75 4686-719 * 55.82 25 6 x 90 4686-720 * 55.82 25 6 x 110 4686-721 * 55.82 25 6 x 20 Twin 4686-812 * 134.68 5 6 x 25 Twin 4686-814 * 134.68 5 6 x 32 Twin 4686-816 * 134.68 5 10.11
ontain-it Accessories Fitting lip 4 & 6 4693-101 * 0.55 25 Pipe lamp Part No. USD 4 & 6 4693-102 * 491.40 Drill Bits Part No. USD 4 4693-104 * 60.66 6 4693-106 * 121.21 Test Gauge Part No. USD 4 & 6 4693-150 * 62.40 Manual Injection Gun - System II d Part No. USD 4 & 6 4694-200 * 552.06 Pneumatic Injection Gun - System II d Part No. USD 4 & 6 4694-201 * 1516.66 Adhesive artridge - System II imited Shelf ife of 18 Months d 4 & 6 4694-302 * 72.80 12 10.12
Mixing Tips - System II Description Straight 4694-303 * 6.98 10 Bent 4694-307 * 18.80 10 Flexible 4694-306 * 32.76 10 10.13
Adhesive Requirements ontain-it artridge Fittings/Pipe # of Sockets/Tube 1 cartridge 4 fittings 14 1 cartridge 6 fittings 10 1 cartridge 4 pipe 20 ft. length, both sides 1 cartridge 6 pipe 10 ft. length, both sides Adhesive artridge Requirements alculation This table is designed to assist in the accurate determination of the number of adhesive cartridges required for a specific project. Fittings Quantity of 4 Tees and yes Quantity of 4 Fittings (other than tees and wyes) x 3 = x 2 = /14 = Quantity of 6 Tees and yes x 3 = Quantity of 6 Fittings (other than tees and wyes) x 2 = /10 = (+) Split Pipe Feet 4 Split Pipe/20 (1 cartridge will fill 20 ft., both sides) = (+) Feet 6 Split Pipe/10 (1 cartridge will fill 10 ft., both sides) = (+) TOTA ARTRIDGES 10.14