HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS ASCENT EURO GROOVE The Ascent Lock by Truth Hardware is our ultra flexible variation on the classic European style Euro Groove Locking System. With multi-point systems available for both hinged window and door systems, the Ascent Lock allows for plug n play adaptability for a wide range of applications without sparing on the quality and reliability that you expect from Truth Hardware. Designed for aluminum hinged window and doors, this multi-point locking system is designed to fit most common European style profile grooves. With various keeper designs to fit a wide range of frame styles and handles which are interchangeable and reconfigurable for maximum in-house flexibility, the Ascent System has been designed to help manufacturers produce a reliable and attractive window and door system EASY INSTALLATION The Ascent System consists of preassembled components which, compared to competitive systems, greatly reduces the effort needed to install this hardware. Simple slide-in design ensures quick production rates and virtually mistake proof installation. Combine this with standardized fasteners which helps keep the number of installation tools to a minimum and your manufacturing efficiencies have been greatly enhanced. ADJUSTABILITY Truth s Ascent System offers adjustability of both the lock point and the keeper producing maximum mounting flexibility and allows each installation to be optimized for peak performance and ease of operation. Lock point load capacity is +300 lbs per roller. STYLISH Ascent handles are available in both classic and radius styling across the window and door offering to help complement the décor of their surroundings. Both handle designs are available in single- or double-throw locking mechanisms and a range of 4 standard finishes which coordinate with existing Truth Hardware offerings. WINDOW SYSTEMS Our window lock system provides a wide range of available drive components which enable almost any locking application to be accommodated. From corner drives which allow locking of up to 3 sides on the same sash, to shoot bolts for integrated terrace door applications, our system provides a solution. Rollers on all active lock points help reduce operating force to support ADA requirements. DOOR SYSTEMS We also have door handles and escutcheons style matched to the window handles to provide coordinated styling from window to door for combination applications. The door lock drive also utilizes the same lock drive components for easy integration in to your profile systems. PRODUCT APPLICATION ASSISTANCE: If you are designing a new window or door profile, or having difficulty selecting hardware, please contact Truth Hardware. Our highly trained Product Specialists can assist you with the selection of the appropriate hardware to meet your performance requirements, as well as providing personalized application drawings. MATERIALS: Aluminum compatible design ensures maximum corrosion resistance. Coatings allow no direct contact with ferrous materials. Locking Handles: Cast zinc or aluminum for high quality feel and reliability. Lock Components: Cast zinc for strength and durability. Classic #405 #4056 Radius #4054 #4058 Adjustable Lock Point Center Drive Block Adjustable Lock Point 20.2
20.2a WARRANTY: Protected under the terms of the Truth Warranty for Window & Door Manufacturers & Authorized Distributors. Refer to Truth s Terms & Conditions for further details. FINISH: Handles are available in a range of 4 standard decorative powder coated finishes. All functional components are finished in satin anodized aluminum plating for maximum durability and corrosion resistance. ORDERING INFORMATION: Because of the variety of window and door profiles on the market, Truth recommends that you contact Truth Hardware s Product Specialists to help you identify the components that will best meet your requirements and to provide application assistance when requested. To assist us in helping you identify the products you need, please be prepared to provide Truth with the type and style of profile that you are mounting your hardware to. RECOMMENDED SCREWS: Types of screws required determined by material of profile used. See Tech Note #. Refer to drawings for complete information on screw type and quantity needed (sold separately). TRUTH TIPS:. Truth recommends that when designing a hinged window the sash width should be limited to no greater than 66% of the sash height. A sash width that exceeds 66% could develop sash sag over the life of the window. Refer to Truth Tech Note # 3 for more information dealing with sash sag prevention. 2. When selecting mounting screws for Truth hardware, coating compatibility is one of the most important criteria. For best corrosion resistance the coating on the screws show be the same as the coating on the hardware. For more information see Truth Tech Note #. 3. On some window designs, binding can be experienced on the hinge side of the window between the outermost edge of the sash and the jamb. This problem occurs when switching from standard to and egress hinge. If a window system is designed to work with an egress hinge, the window system will work with all other Truth Concealed Casement Hinges. When binding is encountered, three solutions are available; a) move hinge location toward outside of the sash, b) increase the clearance between the sash and jamb, and c) decrease the thickness of the sash. 4. Truth s Euro style door lock system utilizes a commonly available European style lock cylinder, available from Truth hardware. INCLUDE TRUTH SPECS ON YOUR NEXT WINDOW OR DOOR PROJECT European locking system integrated into window profiles to provide maximum performance for casement and awning window applications. All components are high pressure die castings protected with durable powder coat finishes. Locking points offer adjustability of both lock roller and independent keepers. Ascent locking system as provided by Truth Hardware.
FIG. STANDARD 2 POINT 2 POINT LOCK LOCK 2 3 5 4 NO. QTY PART NO. DESCRIPTION 2 4048 SHORT KEEPER 2 406 SHORT END LOCK PT 3 4049 DRIVE BLOCK 4 4062 LONG END LOCK PT 5 405 CLASSIC STD HANDLE 20.2b
FIG. 2 2 POINT LOCK WITH SHOOT BOLTS (DUAL DRIVE HANDLE) FIG. 2 2 POINT LOCK WITH SHOOT BOLTS (DUAL DRIVE HANDLE) 5 2 3 4 5 2 NO. QTY PART NO. DESCRIPTION 2 4063 SHOOT BOLT 2 2 4050 CENTER LOCK PT 3 4058 BI - DRIVE BLOCK 4 4056 CLASSIC DUAL HANDLE 5 2 4048 SHORT KEEPERS 20.2c
FIG. 3 6 POINT LOCKING ON 3 SIDES OF VENT FIG. 3 6 POINT LOCKING ON 3 SIDES OF VENT 7 6 2 3 5 2 NO. QTY PART NO. DESCRIPTION 4 4048 SHORT KEEPER 2 2 4050 CENTER LOCK PT 3 4049 DRIVE BLOCK 4 4062 LONG END LOCK PT 5 4054 RADIUS STD HANDLE 6 4 6 2 4057 CORNER DRIVE 7 406 SHORT END LOCK PT 20.2d
FIG. 4 TERRACE DOOR SYSTEM WITH 2 POINT LOCKING F 2 LOCKING 5 3 4 6 NO. QTY PART NO. DESCRIPTION 2 406 SHORT END LOCK PT 2 4062 LONG END LOCK PT 3 4059 DOOR LOCK BOX 4 4053 CLASSIC DOOR SET 5 5 2 4048 SHORT KEEPER 6 4060 DOOR STRIKE 20.2e
FIG. 5 SPECIFICATION OF THE SLOT SECTION FOR MOVEABLE FITTINGS FIG. 5.590 5.0.787 20.0.43 0.8.866 22.0.453.5.8 4.5.77 9.5.38 3.5.55 4.0.709 8.0.827 2.0.0 2.5.57 4.5.08 2.0 HOLES FOR TRANSMISSION RODS RODS.77 9.5.3 8.0.24 6.0.3 8.0.8 4.5 R.2 3.0.22 5.5 DIMENSION FOR THE HANDLE INSTALLATION HANDLE INSTALLATION 3.94 00.0 2.68 68.0.24 6.0.8 4.7.06.5 20.2f
FIG. 6 OUTSWING 2 POINT LOCK FIG. 6 OUTSWING 2 POINT LOCK 2 2X.3 8.0 2X.47 2.0.39 0.0 2X.24 6.0 4.93 49.0 3.86 98.0 NO. QTY PART NO. DESCRIPTION 2 4048 SHORT KEEPER 2 406 SHORT END LOCK PT 3 4062 LONG END LOCK PT 4 405 CLASSIC STD HANDLE 3 20.2g
FIG. 7 OUT-SWING MOUNTING CUTOUT.39 0.0 3.94 00.0.6 4.0 2X.22 5.5 A 2X.06.5.6 29.5 A SECTION A-A 20.2h
FIG. 8 DRIVE 8 DRIVE BLOCK 4049 4049.76 9.3 2.33 59.2 FIG. 9 CENTER FIG. 9 CENTER LOCK LOCK POINT 4050 POINT 4050 3.82 97.0.45.5.99 25..77 9.6 3.82 97.0.43.0.99 25..98 50.3.22 5.6.5 2.9 3.35 85.0 FIG. 0 SHORT END LOCK POINT 406 406 2.36 59.9 2.32 59.0 FIG. DUAL-DRIVE BLOCK 4058 BI-DRIVE 4058.77 9.6.77 9.6.43.0.28 32.4.5 2.9.22 5.6.50 2.6 FIG. 2 LONG END LOCK POINT 4062 LOCK 4062 3.78.77 96. 9.6 4.06 03.0.43.0 2.72 69.0 2.65 67.4.5 3.0.22 5.6 20.2i
FIG. 3 CURTAIN WALL POINT 4046 FIG. 4 SHOOT BOLT 4063.06.5.39 9.9.75 8.9.45.4.48 2.2.40 0.2.73 8.5.2 5.3.32 8. 3.5 79.9.58 40. FIG. 5 CORNER DRIVE 4057 4057.3 7.8 2.83 7.8.9 23..22 5.6 2.88 73.2.24 6.0.68 42.6 3.0 78.7 20.2j
FIG. 6 CLASSIC STANDARD HANDLE 405 FIG. 6 CLASSIC STANDARD HANDLE 405.06.6 4X M5 2.55 64.8.26 32.0 3.35 85.0 3.94 00.0.70 7.7 TRAVEL 6.96 76.7 4.78 2.4 FIG. 7 CLASSIC DUAL HANDLE 4056 4056.06.5 4X M5 2.55 64.8.26 32.0 3.94 00.0 3.35 85.0 6.96 76.7.70 7.7 TRAVEL 4.78 2.4 20.2k
FIG. 8 RADIUS STANDARD HANDLE 4054.06.4 4X M5 2.92 74..26 32.0 4.03 02.4 3.27 83..70 7.7 TRAVEL 7.40 88.0 5.60 42.2 FIG. 9 RADIUS DUAL HANDLE 448 DUAL 448.06.4 4X M5 2.92 74..26 32.0 3.27 83. 4.03 02.4 7.40 88.0.70 7.7 5.60 42.2 20.2l
FIG. 20 LOCK F LOCK BOX 4059 4059 2.2 56..9 23. 3.53 343.6.38 35..28 7.2.25 3.8.2 30.6 4.94 25.5 8.69 220.7 3.6 9.6.96 49.7 4.94 25.5. 2.8.58 40.0.58 4.7 FIG. 2 DOOR DOOR STRIKE 4060 4060.83 2..06.4.9 4.9 3.92 99.6 7.84 99. 7.04 78.8.54 3.6 20.2m
FIG. 22 CLASSIC DOOR HANDLE 4053 2.53 64.3.38 34.9.27 6.9.80 20.4 8.23 209.0 2.7 55.0 4.5 4.5 2.83 7.8 3.63 92..69 42.8 2.4 MAX 6.2.58 MIN [4.7] 2.92 74.2 4.33 0.0 SCREWS SPINDLE.27 6.9 20.2n
FIG. 23 #4228 CLASSIC STANDARD HANDLE WITH CYLINDER LOCK AND KEYS STANDARD W/KEYS.06.5 4X M5 2.93 74.4.28 32.5 3.35 85.0 3.94 00.0 6.98 77.3.72 8.2 TRAVEL 4.8 22.2 FIG. 24 #4230 CLASSIC DUAL HANDLE WITH CYLINDER LOCK AND KEYS W/KEYS.06.5 4X M5 2.93 74.4.28 32.5 3.35 85.0 3.94 00.0 6.98 77.3.72 8.2 TRAVEL 4.8 22.2 20.2o
FIG. 25 4232 KEYS KEYS ONLY ONLY FIG. 26 423 THUMB TURN AND KEY TURN "C" "C" "A" "B" "A" "B" PART NO. "A" "B" "C" 423.08 [27.5].08 [27.5] 2.6 [54.9] 4232.25 [3.8].25 [3.8] 2.50 [63.5] 20.2p
FIG. 27 TALL KEEPER 4047 FIG. 28 SHORT KEEPER 4048.87 22..78 9.8.79 20..87 22..28 7.2.53 3.5.26 6.7.46.6 FIG. 29 ADJUSTABLE KEEPER 4064 4064.80 20.3.50 38.0.30 7.5.5 2.8 20.2q 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.45.5620 800.866.7884 n TRUTH.COM
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.45.5620 800.866.7884 n TRUTH.COM 20.2r
20.2s 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.45.5620 800.866.7884 n TRUTH.COM