Master Degree in Aerospace Engineering, Politecnico di Milano Ph.D in Mathematics, Numerical Analysis, EPFL CURRICULUM VITAE PERS ONAL DATA Status: Single Nationality: Italian Date of Birth: 20th April 1977 Place of Birth: Sant Angelo Lodigiano (LO), Italy Permanent Address: Viale Roma, 52 26866 Castiraga Vidardo (LO), Italy Phone: +41 21 6934267 (Office); +39 0371 91884 (home) Web: http://iacs.epfl.ch/~rozza E-Mail: gianluigi.rozza@epfl.ch, Professional Address: EPFL, IACS-CMCS, Station 8-MA CH1015 Lausanne, Switzerland. PRESENT POSITION MAY 2008-PRESENT EPFL Ecole Polytechnique Federale de Lausanne (Switzerland) Senior Researcher («Fonctionnaire Scientifique») at the Chair of Modelling and Scientific Computing (CMCS) led by Prof. Alfio Quarteroni and Lecturer («Chargé de cours») at the Doctoral School of Mathematics and at the Section of Mathematics of EPFL. Co-Applicant of scientific research projects at Swiss National Science Foundation (and Co-Director of two Phd students) and task coordinator for the European Research Council Mathcard Project, EPFL and Politecnico di Milano (Task E: Efficient methods for Control and Optimization). Responsible of semester/diploma/master projects in the Chair of Modelling and Scientific Computing. PAST POSITIO NS MAY 2006-APRIL 2008 MIT- Massachusetts Institute of Technology, Boston MA (USA) Micro-Fluids Laboratory, Department of Mechanical Engineering Prof. Anthony T. Patera s Post Doctoral Associate Researcher, currently Research Affiliate at MIT. Research activity on real-time reliable computation in continuum mechanics: reduced basis methods and a posteriori error estimation for the solution of parametrized partial differential equations.
NOVEMBER 2002-APRIL 2006 EPFL- Ecole Polytechnique Fédérale de Lausanne (Switzerland) Prof. Alfio Quarteroni s Chair (PhD and Post-Doctoral) Research Assistant. Chair of Modelling and Scientific Computing (CMCS), partner of Alinghi Team for the America s Cup 2003-2007 and of Solar Impulse Project 2004-2006 by B. Piccard -Round-the world-flight in a solar plane-. Collaboration within the Solar Impulse Project at EPFL: aerodynamic modelling and multidisciplinary optimization task (Interaction with Design Team and propulsive/power-train task). [http://www.solar-impulse.com] OTHER POSITI ONS AND DUTIES Teaching assistant and teaching coordination Lecturer Assistant for 10 cycles of Numerical Analysis Courses for Engineers at EPFL in winter and summer semesters of academic years 2001-02, 02-03, 03-04, 04-05, 05-06, 08-09. Theoretical and computer-based exercises in Matlab and Octave environment. Courses held by Prof. A. Quarteroni (2002-present) and his associates Prof. L. Formaggia (2002), Prof. E. Burman (2003-2004). Responsible of projects and exercises (15 hours) for the INRIA-EDF- CEA Summer School held in Paris (June 2008) on reduced basis methods (A.T. Patera, Y. Maday). Lecturer in the spring semester 2009 for the course Computational Mechanics by Reduced Basis Methods at the Doctoral School of Mathematics of EPFL. Lecturer in the fall semester 2009 for the course Numerical Analysis (Bachelor) for Civil and Environmental Engineers (Section of Mathematics of EPFL) and in the spring semester 2010 of the courses Computational Mechanics by Reduced Basis Methods and Advanced Topics in Numerical Modelling for PDEs at the Doctoral School of EPFL. Scientific Computing Software Collaborator for the development and maintenance of the website http://augustine.mit.edu and reduced basis software library rbmit, developed at MIT with A.T. Patera, C. Nguyen and D.B.P. Huynh, for real-time reliable continuum mechanics computations (tutorials, libraries, worked problems). Collaboration with Technology Licensing Office of MIT during the release of rbmit software and with the Athena team of MIT during the installation/release and maintenance of rbmit software on Athena Cluster. EDUCATION BEFORE PHD 1991-1996 Maturità Scientifica (Scientific Diploma) at Liceo Scientifico Statale Giovanni Gandini in Lodi, Italy with final full marks and honours 60/60 cum Encomio.
1997 2002 Stages/Master Degree Thesis December 2001/ May 2002 June/October2002 November 2002- November 2005 Politecnico di Milano, Industrial Engineering. Laurea (Master-Degree) in Aerospace Engineering (5 years curriculum and training), Specialization: Aerodynamics. Graduated on 14 October 2002 with final full marks and honours: 100/100 cum Laude. EPFL- Ecole Polytechnique Fédérale de Lausanne (Switzerland) Mathematics Institute, EU-Socrates Project, Internship and master degree thesis: Controllo Ottimale e Ottimizzazione di Forma in Fluidodinamica Computazionale (in Italian). Advisor: Prof. A. Quarteroni. Politecnico di Milano, MOX - Modeling and Scientific Computing-, Mathematics Department Francesco Brioschi. Internship. EPFL- Ecole Polytechnique Fédérale de Lausanne (Switzerland) Doctoral School in Applied Mathematics (Numerical Analysis, Computational Engineering), 3 years training (avec mention). Title of the thesis Shape Design by Optimal Flow Control and Reduced basis Techniques: Applications to Bypass Configurations in Haemodynamics. PhD committee: Alfio Quarteroni, thesis director; Anthony T. Patera (MIT), co-advisor; Valery I. Agoshkov (Russian Academy of Sciences), co-advisor; Jacques Rappaz (EPFL), referee; Charles Stuart (EPFL), president of the commision. PhD Programme within the EU-RTN (Research Training Network of European Union Funding Agency), HaeModel Project as Young Researcher. Partners: Politecnico di Milano (Italy), EPF-Lausanne (Switzerland), INRIA and University of Paris VI (France), Imperial College London (UK), Technical University Graz (Austria) and Istituto Superiore Tecnico Lisbon (Portugal). Task T1.2: Development and Analysis of efficient and accurate schemes for haemodymic flows in arteries, Optimal Control and Shape Optimization in Haemodynamics. LANG UAGES Italian English French Mother tongue. Fluent. Toefl certified. Good. AWARDS AND PRIZES Premio Gandini 1996 Bill Morton CFD Prize 2004 Premio Gandini awarded in 1996 by Comune di Lodi after Scientific Diploma (best curriculum). Bill Morton CFD Prize 2004, Award (Trinity College, Oxford, 31 March 2004) for young researchers under 31 given every three years by Computational Fluid Dynamics Institutes and Computing Laboratories of Oxford and Reading Universities (UK) during International Conference ICFD, held in 2004 in St.Cathrine College, Oxford.
MIT Fellowship 2005 ECCOMAS Ph.D Award 2006 Special Mention EPFL, 2006 Springer CSE Prize 2009 MIT young researcher fellowship for exemplary research in computational fluid mechanics to attend the Third MIT Conference on Computational Fluid and Solid Mechanics, June 2005. European Community on Computational Methods in Applied Mechanics and Engineering Ph.D Award for the best Ph.D Thesis in Computational Science and Engineering of 2005 awarded at ECCOMAS CFD 2006 Conference in the Netherlands, September 2006. Special mention by Research Committee of EPFL for PhD Theses, ranked in the best 4% of the theses (250) discussed in 2005 at EPFL. Computational Science and Engineering Prize by Springer-Verlag (June 2009) with D.B.P. Huynh, N.G. Nguyen for developing the software library rbmit for real-time computing in computational mechanics. GRAN TS 2005-06 FNS 2007 Rocca 2009 FNS EPFL, Research Committee, Swiss National Science Foundation. Reduced Basis Methods for Fluid Mechanics Problems. MIT-Politecnico di Milano Progetto Roberto Rocca (with A.T. Patera and A. Quarteroni). Travel grants New Developments for Reduced Basis Methods in Fluid Mechanics. Co-applicant (with A. Quarteroni and S. Deparis) at Swiss National Science Foundation for a research grant on Reduced Basis Method for Optimization and Control. Grant approved for two Phd students. RESEARCH ACTIVITIES Referred Publications In International Journals PUBLICATIONS [J1] A. Quarteroni, G. Rozza. Optimal Control and Shape Optimization in aorto-coronaric bypass anastomoses. In Mathematical Models and Methods in Applied Sciences M3AS (WorldScientific, Singapore). Vol.13 N.12, 2003, pp.1801-1823. (ISSN: 0218-2025) [J2] G. Rozza. Reduced Basis Methods for Elliptic Equations in subdomains with A-Posteriori Error Bounds and Adaptivity. In Applied Numerical Mathematics (Elsevier, Amsterdam, The Netherlands), Vol.55 N.4, 2005, pp.403-424. (ISSN: 0168-9274) [J3] G. Rozza. On Optimization, Control and Shape Design for an arterial bypass. In International Journal for Numerical Methods for Fluids (Wiley, Chichester, UK), Vol.47 N.10-11, pp.1411-1419, 2005. (ISSN: 0271-2091) [J4] V. Agoshkov, A. Quarteroni, G. Rozza. Shape Design Approach using Perturbation Theory for bypass anastomoses. In SIAM Journal on Numerical Analysis (SIAM, Philadelphia, USA), Vol.44 N.1, 2006, pp.367-384. (ISSN: 0036-1429) [J5] V. Agoshkov, A. Quarteroni, G. Rozza. A Mathematical Approach in the Design of Arterial Bypass Anastomoses using unsteady Stokes equations. In Journal of Scientific Computing (Springer, New York, USA) Vol. 28, N.2-3, 2006, pp. 139-165. (ISSN: 0885-7474)
Stokes equations. In Journal of Scientific Computing (Springer, New York, USA) Vol. 28, N.2-3, 2006, pp. 139-165. (ISSN: 0885-7474) [J6] G. Rozza, K. Veroy. On the stability of Reduced Basis methods for Stokes Equations in parametrized domains. In Computer Methods in Applied Mechanics and Engineering, (Elsevier, Amsterdam, The Netherlands) Vol.196, N. 7, 2007, pp. 1244-1260. (ISSN: 0045-7825 ) [J7] G. Rozza, Reduced Basis Techniques for Stokes Equations in domains with non-affine parameter dependence. In Computing and Visualization in Science, (Springer, Berlin/Heidelberg, Germany) Vol.12, N.1, pp. 23-35, 2009. (ISSN: 1432-9360) [J8] A. Quarteroni, G. Rozza. Numerical Solutions of parametrized Navier-Stokes equations by reduced basis method. In Numerical Methods for PDEs (Wiley, Chichester, UK), Vol.23, N. 4, pp. 923-948, 2007. (ISSN 0749-159X) [J9] D.B.P. Huynh, G. Rozza, S. Sen, A. T. Patera. A Successive Constraint Linear Optimization Method for Lower Bounds of Parametric Coercivity and Inf-Sup Stability Constants. C. R. Acad. Sci. Paris, Analyse Numerique (Elsevier France, Paris), Vol. 345, pp. 473-478, 2007. (ISSN : 1631-073X) [J10] G. Rozza, D.B.P. Huynh, A.T. Patera. Reduced basis approximation and a posteriori error estimation for affinely parametrized elliptic coercive partial differential equations. Invited paper for ARCME -Archives of Computional Methods in Engineering, CIMNE, Barcelona, Spain (by Springer Netherlands), Vol. 15, N.3, pp. 229-275, 2008. [J11] R. Milani, A. Quarteroni, G. Rozza. Reduced basis methods in Linear Elasticity problems with many parameters. Computer Methods in Applied Mechanics and Engineering, (Elsevier, Amsterdam, The Netherlands) (ISSN: 0045-7825), Vol. 197, pp. 4812-4829, 2008. [J12] B. Haasdonk, M. Ohlberger, G. Rozza. Reduced Basis Method for Evolution Schemes with Nonlinear Explicit Operators. Accepted for publication on ETNA, Electronic Transaction in Numerical Analysis, special issue on FEM applications, Vol. 32, pp. 145-168, 2008. [J13] S. Deparis and G. Rozza. Reduced basis method for multiparameter dependent steady Navier-Stokes equations: application to natural convection into a cavity. J. Comp. Physics, Vol. 228, pp. 4359-4378, 2009. [J14] C.N. Nguyen, G. Rozza, A.T. Patera, Reduced Basis Approximation and A Posteriori Error Estimation for the Time- Dependent Viscous Burgers Equation. Calcolo, Vol. 46, pp. 157-185, 2009. [J15] Z.C. Xuan, T. Lassila, G. Rozza and A. Quarteroni, Computing upper and lower bounds for linear outputs of elasticity by the smoothed finite element method. Int. J. Numer. Meth. Engng., 2009, in press. [J16] T. Lassila, G. Rozza, Parametric free-form shape design with PDE models and reduced basis method. Computer Methods in Applied Mechanics and Engineering, 2010, to appear.
Book in Progress Conference Proceedings/Paper (* with review) [B1] A.T. Patera, G. Rozza. Reduced basis approximation and a posteriori error estimation for parametrized partial differential equations. Book Project with software library annexed. First five chapters are available on line as pre-view at http://augustine.mit.edu. MIT Pappalardo Monograph in Mechanical Engineering. [C1]* G. Rozza. Real-Time Reduced Basis Techniques for Arterial Bypass Geometries. Computational Fluids and Solids Mechanics, K.J. Bathe Ed. (Elsevier, Amsterdam, The Netherlands), pp.1283-1288, 2005. (ISBN: 0-08-044481-6) [C2]* G. Rozza. Real-time reduced basis solutions for Navier-Stokes equations: optimization of parametrized bypass configurations ECCOMAS CFD 2006 Proceedings on CD, P. Wesseling, E. Onate, J. Periaux Eds. (TU Delft, The Netherlands), 2006. (ISBN: 90-9020970-0) [C3] A. Quarteroni, G. Rozza. Tecniche a basi ridotte per l'ottimizzazione di configurazioni di innesto per bypass coronarici. In Quaderni Incontri di studio N.39, Un grande matematico dell'800: omaggio a Eugenio Beltrami 1835 1900. Istituto Lombardo Accademia di Scienze e Lettere, Milan, Italy, 2006, pp. 225-238. (ISBN 978-88- 7916-359-0, LED, Milano). [C4] A. Quarteroni, L. Bonaventuta, L. Dede, E. Miglio, A. Quaini, M. Restelli, G. Rozza, F. Saleri. Modellistica Matematica in Problemi Ambientali. To appear in Quaderni Incontri di Studio N.42, Istituto Lombardo, Accademia di Scienze e Lettere, Milan, Italy, In press, 2008. [C5] *G. Rozza, An Introduction to Reduced Basis Method for Parametrized PDEs. SIMAI Conference 2008, Rome, Italy. Contributed Paper, Applied and Industrial Mathematics in Italy, Vol. III, Series on Advances in Mathematics for Applied Sciences, vol. 82, pp. 508-519, WorldScientific, Singapore, 2009. [C6] *G. Rozza, D.B.P. Huynh, C.N. Nguyen, A.T. Patera, Real- Time Reliable Simulation of Heat Transfer Phenomena, Proceedings of ASME-HT 2009 Conference, July 2009, S. Francisco, US. Paper HT2009-88212. [C7] *G. Rozza, C.N. Nguyen, A.T. Patera, S. Deparis, Reduced Basis Methods and A Posteriori Error Estimators for Heat Transfer Problems, Proceedings of ASME-HT 2009 Conference, July 2009, S. Francisco, US. Paper HT2009-88211. [C8] T. Lassila, G. Rozza, Model Reduction of steady Fluid-Structure Interaction problems with free-form deformations and reduced basis methods Proceedings of 10th Finnish Mechanics Days, Jyväskylä, pp. 454--465, 2009. Proceedings in Invited Books as Chapters, Special Volumes and Chapters in Books [I1]* A. Quarteroni, G. Rozza, L. Dede, A. Quaini. Numerical approximation of control problems for advection-diffusion processes. Proceedings of IFIP05 Conference. In System Modeling and Optimization, Ceragioli, F.; Dontchev, A.; Furuta, H.; Marti, K.; Pandolfi, L. (Eds.) (Springer, New York, USA) 2006, pp.261-273. (ISBN: 0-387- 32774-6) [I2] * A. Quarteroni, G. Rozza, A. Quaini. Reduced basis methods for advection-diffusion optimal control problems. In Advances in Numerical Mathematics, W. Fitzgibbon, R. Hoppe, J. Periaux, O. Pironneau, and Y. Vassilevski Eds., pp. 193-216, Moscow/Houston, 2006.
[I3] * C.N. Nguyen, G. Rozza, D.B.P. Huynh, A.T. Patera, Reduced Basis Approximation and A Posteriori Error Estimation for parametrized parabolic pdes; application to real-time Bayesian parameter estimation. In Biegler, Biros, Ghattas, Heinkenschloss, Keyes, Mallick, Tenorio, van Bloemen Waanders, and Willcox, editors, Computational Methods for Large Scale Inverse Problems and Uncertainty Quantification. John Wiley and Sons, UK, to appear, 2009. [I4] G. Rozza An Overview on Reduced Basis Methods for Parametrized PDEs, appeared as 18 th Chapter of the Book Numerical Models for Differential Problems by A. Quarteroni, Springer Series MS&A, Vol. 2, 2009. Software Library and Documentation [S1] rbmit_system: Software Library with reduced basis algorithms developed in Matlab environment. MIT, Technology Licensing Office, Case 12600 (A.T.Patera, G. Rozza, D.B.P. Hyunh, N.C. Nguyen). Available on line at http://augustine.mit.edu with documentation and demo running on a Matlab Webserver. [S1a] D.B.P. Huynh, N.C. Nguyen, A.T. Patera, G. Rozza. Documentation for rbmit Software: I. Reduced Basis (RB) for Dummies [S1b] D.B.P. Huynh, N.C. Nguyen, A.T. Patera, G. Rozza. Documentation for rbmit Software: II.Time-Dependent Problems [S1c] D.B.P. Huynh, N.C. Nguyen, A.T. Patera, G. Rozza. rbmit Software for COMSOL, COMSOL News, and COMSOL e-news 2008. Ph.D Thesis Master Degree Thesis Master Thesis as Co-Advisor [T1] G. Rozza. Shape Design by Optimal Flow Control and Reduced Basis Techniques: Applications to Bypass Configurations in Haemodynamics. PhD Thesis N. 3400, December 2005, EPFL, Lausanne, Switzerland. [T2] G. Rozza. Controllo Ottimale e Ottimizzazione di Forma in Fluidodinamica Computazionale Master Degree Thesis (Laurea), Aerospace Eng., Advisor: Prof. Alfio Quarteroni, MOX-Politecnico di Milano, Italy, 2002. [T3] L. Dede. Controllo ottimale e adattivita per equazioni alle derivate parziali e applicazioni Master Degree Thesis (Laurea), Aerospace Eng., Advisor: Prof. Alfio Quarteroni, MOX-Politecnico di Milano, Italy, 2004. [T4] A. Quaini. Metodi a basi ridotte per problemi differenziali di fluidodinamica ambientale Master Degree Thesis (Laurea), Aerospace Eng., Advisor: Prof. Alfio Quarteroni, MOX-Politecnico di Milano, Italy, 2005. [T5] R. Milani. Metodi a basi ridotte per la risoluzione di problemi parametrizzati in elasticita lineare. Master Degree Thesis (Laurea), Aerospace Eng., Advisor: Prof. Alfio Quarteroni, MOX-Politecnico di Milano, Italy, 2006. [T6] C. Gunther. ``Reduced Basis methods for the optimization of racing car components. Master degree Thesis, University of Aachen, 2008.
[T7] F. Gelsomino. Exploration and comparison of reduced order modelling techniques for parametrized system, Master degree Thesis, EPFL, 2010. [T8] A.Trezzini, in progress, 2010 [T9] A. Koshakji, in progress, 2010. Popularization of Mathematics [P1] A. Quarteroni, G. Fourestey, N. Parolini, C. Prud homme, G.Rozza. Matematica in Volo con Solar-Impulse, in Matematica e Cultura 2006, M. Emmer Ed., Springer-Italia, Milan, Italy, 2006, pp.35-50. (ISBN 88-470-0464-0 ) [P2] G. Rozza. Matematica e Impresa, Brochure SIMAI, Societa Italiana di Matematica Applicata all Industria, Springer-Italia, Milan, Italy, 2006. [P3] A. Quarteroni, G. Fourestey, N. Parolini, C. Prud homme, G.Rozza. Mathematics in the Air with Solar-Impulse, in Mathematics and Culture 2008, M. Emmer Ed., Springer, Heildeberg, Germany 2008. International/ National Conferences (# poster session, * invited talk) CONF ERENCES/ SEMINARS/WORKSHO PS - [c1] MPF 2003, Modelling Physiological Flows, Contributed talk in plenary session: Optimal Control and Shape Optimization in Aorto- Coronaric Bypass Anastomoses, Lausanne (Switzerland), 3 September 2003. - [c2] ICFD 2004, International Conference on Computational Fluid Dynamics, talk in plenary session of the finalists for the Bill Morton CFD Prize 2004: Optimization, Control and Shape design for an Arterial Bypass, Oxford University (UK), 28-31 March 2004. - [c3] HaeMOdel Workshop, Numerical Modelling in Haemodynamics, Optimization and flow control for arterial bypass, Technical University Graz (Austria), 13-14 April 2004. - [c4] MPF2005, Modelling Physiological Flows, Contributed talk in plenary session: New trends in arterial bypass optimization, Sesimbra (Portugal), 1 April 2005. - [c5] EFEF 2005, Third Finite Element Fair, talk in plenary session Reduced basis methods for fluid mechanics problems, University of Pavia (Italy), 3 June 2005. - [c6] Third MIT Conference on Computational Fluid and Solid Mechanics, talk in mini- symposium on Mathematical modelling for cardiovascular system : Real-time reduced basis techniques for arterial bypass geometries, MIT, Boston, USA, 17 June 2005 and with S.Deparis, K.Veroy, and A. T. Patera, talk Reduced-basis approximation and a posteriori error estimation for Navier-Stokes equations. - [c7] IFIP05, Conference on system modelling and optimization, talk in the symposium on Controllability and inverse problems for distributed parameter systems : Control, Shape design and optimization of aorto-coronaric bypass, Politecnico di Torino (Italy), 21 July 2005. - [c8] Workshop on Computational Life Sciences, talk New trends in arterial bypass optimization: a multilevel approach, University of Innsbruck, Austria, 14 October 2005,
- [c9] GNCS, National Conference of Italian Group of Scientific Computing, talk in plenary session Reduced basis methods for Optimization in Fluid Mechanics, University of Milano, Italy, 14-17 February 2006. - [c10] # Swiss Numerical Colloquium, poster session Reduced basis methods for Navier-Stokes Equations in parametrized domains, EPFL, Lausanne, Switzerland, 13 April 2006. - [c11] AFOSR Annual Review Meeting, Air Force Office for Scientific Research, talk in Numerical Computation session Reduced basis methods and a posteriori error estimation for reliable and real-time solution of parametrized PDEs, Atlanta (USA), 7-11 August 2006. - [c12] * ECCOMAS CFD2006, Invited plenary talk on the occasion of the ECCOMAS PhD Award Shape design by optimal flow control and reduced basis techniques: applications to bypass configurations in Haemodynamics, Egmond aan Zee, The Netherlands, 5-8 September 2006. - [c13] # COMSOL Worlwide Conference 2007, Boston, MA, Poster Session Reduced Basis Software Library for Real-Time Continuum Mechanics Applications, 4-6 October 2007. - [c14] * Workshop on Reduced Basis Methods, Simula Research Laboratories, Oslo, Norway. Invited talk, Reduced Basis Methods for affinely parametrized linear elliptic coercive PDEs 9 May 2008. - [c15] SIMAI (Italian Society for Industrial and Applied Mathematics with SIAM), Conference, Rome, Italy, Contributed Talk, Reduced Basis Method in continuum mechanics: application to transport problems, 15-19 September 2008. - [c16] Swiss Numerical Colloquium, University of Basel, Contributed talk Reduced basis Method and Free Form Deformations, 17 April 2009. - [c17] ICOSAHOM 2009, NTNU, Trodheim, Norway. Coorganizer of the minisymposium on reduced basis methods and contributed talk, 22-26 June, 2009 - [c18] ASME (American Society Mechanical Engineers) Heat Transfer summer Conference, S. Francisco, CA, USA. contributed talks in Educational Heat Transfer and in Advances in Computational Heat Transfer sessions, 19-23 July 2009. - [c19] * MoRePas 2009, Workshop on Model Order Reduction of Parametrized Systems, Munster, Germany, Invited Talk, 16 September 2009 and poster session. - [c20] MPF2010, Modelling of Physiological Flows, Chia Laguna, Sardinia, Italy, Organizing Committee and contributed talks, 2-5 June 2010. - [c21] ECCOMAS CFD 2010, Conference on Computational Fluid dynamics, Lisbon, Portugal, Co-organizer of the minisymposium on reduced order modeling in CFD and contributed talk, 14-17 June, 2010
- [c22] Joint MOX-Politecnico di Milano -- Center Computational Eng-MIT Rocca Workshop on Reduction Strategies for the simulation of complex systems, Politecnico di Milano, Organizing Committee, 19-21 January 2011. - [c23] *Computational Challenges in PDEs, Isaac Newton Institute for Math, Cambridge, UK and Wales Institute for Math and Comp. Sc., University of Swansea, UK, 4-8 April 2011, Invited plenary speaker in the session on Low Order Modelling. Invited Seminars - [s1] MOX, Politecnico di Milano. Invited Seminar: Reduced Basis techniques for optimization in Haemodynamics, 17 January 2005. - [s2] Politecnico di Torino, Mathematics Department, Invited Seminar: Optimal Control and Shape optimization in Fluid Dynamics, 24 January 2005. - [s3] University of Freiburg (Germany), Invited seminar, Applied Mathematics Institute, Reduced Basis Methods for Control and Optimization Problems, 22 January 2006. - [s4] MOX, Politecnico di Milano. Invited Seminar: Reduced Basis Approxmation and A Posteriori Error Estimation for Parametrized PDEs, 3 May 2007 (Progetto Rocca Seminar). - [s5] University of Basel, Symposium in Computational Mathematics, 23 October 2009. Institute/Lab Seminars and tutorials. - [s6] IACS, Seminars in Analysis and Scientific Computing, Contributed talks, Weisshorn (Switzerland), 18 September 2003 and 17 September 2004. - [s7] CMCS, Modelling and Scientific Computing, Introduction to Reduced Basis methods for Elliptic problems, November 2003 and Reduced Basis Techniques for Stokes equations, Lausanne, December 2004. - [s8] MIT, MicroFluids Laboratory Fifth Anniversary, Poster Session Reduced Basis Approximation and A Posteriori Error Estimation for Parametrized PDEs, 17 May 2007. - [s9] CEA-EDF-INRIA, Summer School on Reduced Order Modelling and Optimization, Paris, 23 June - 4 July 2008. Asssistant for practical works sessions and mini-projects (5 sessions, 15 hours). - [s10] INDAM, ESF, SNS Summer School on Optimal Control of PDEs, Cortona Italy, 12-17 July 2010. Lecturer on Reduced order models (8 hours).
SCIENTIFIC A ND INSTI TUTIONAL COLLABO RATIONS -Prof. A.T. Patera s Group, Mechanical Engineering Department, Fluid Mechanics Laboratory, MIT, Massachusetts Institute of Technology, Boston MA, USA (2003-present). -Dr. N.C. Nguyen, MIT (2004-present). -Dr. D.B.P. Huynh, Singapore-MIT Alliance (2006-present). -Prof. A. Quarteroni (2001-present), Prof. L. Formaggia (2001-present), Prof. F. Saleri (2002-2007), Prof. A. Veneziani (2001-2007), Dr. Fabio Nobile (2008-present) MOX, Modeling and Scientific Computing, Politecnico di Milano. -Prof. V. Agoshkov, Institute of Numerical Mathematics, Russian Academy of Sciences, Moscow, Russia (2003-2006). -Prof. A. Veneziani, Emory University, US (2007-present). -Prof. D. Ambrosi, Politecnico di Torino ( 2005) and Politecnico di Milano (2008-present). -Prof. M. Ohlberger, Dr. B. Haasdonk, University of Freiburg/Munster/Stuttgart, Germany (2005-present). -Prof. K. Urban s Group (Timo Tonn), University of Ulm (Germany) (2005-2006). -Dr. E. Lovgren, University of Tronheim/Simula Labs, Oslo (Norway) (2006-present). -Prof. Y. Maday, University Paris VI and Brown University, Dr. J-F. Gerbeau for the organization of the INRIA-CEA-EDF Summer School on Reduced basis in Paris 2008. -Prof. M. Behr s group (Claudia Gunther), Aachen University, Germany (2008). -Dr. M.Grepl, Dr. K. Veroy, Aachen University, Germany (2003-2004, 2009-present) --Progetto Rocca, MIT-Politecnico di Milano, MIT-Italy (2006-present) --Bernoulli Center, EPFL during special semester on mathematical modeling and numerical simulation of the cardiovascular system (July-December 2003). --Collaboration on research activities for master degree thesis in Aerospace Engineering developed at EPFL-CMCS and Politecnico di Milano-MOX in the framework of Socrates Project of European Union (L. Dede (2004), A. Quaini (2005), R. Milani (2006), Alberto Trezzini (2009), Anwar Koshakji (2009), Erasmus Students of Politecnico at EPFL). --Reviewer Activity for International Journals: - International Journal for Numerical Methods in Fluids (2004, 2008), - Applied Numerical Mathematics (2006), - SIAM Numerical Analysis (2007, 2008), - SIAM Multiscale Modeling and Simulation (2007), - Biomedical Engineering Online (2007), - Journal of Computational and Applied Mathematics (2007), - Numerical Heat Transfer (2007), - Computer Methods in Applied Mechanics and Engineering (2007, 2008, 2009), - American Mathematical Society/Mathscinet (2007, 2008, 2009), - Applied Mathematics and Computation (2008), - International Journal of Thermal Sciences (2009)
- SIAM Scientific Computing (2009). MEMBERSHIPS UMI, Unione Matematica Italiana, since 2009. SIMAI, Societa Italiana di Matematica Applicata all Industria, since 2005. SIAM, American Society for Industrial and Applied Mathematics, since 2004. ALP, Politecnico di Milano Alumni Association, since 2002. Area Leader, since 2007. Ordine degli Ingegneri della Provincia di Lodi (N.450), Settore A (IND, CIV, INFO), since 2004. Lausanne, January 2010 Gianluigi Rozza, Dott.Ing, Dr.es Sc.