Finish with Style with the Finista range Finish your next project with style by integrating the new Finista range of products from Lincoln Sentry. Finista is a range of stylish solutions for the kitchen, bathroom, wardrobe, laundry and office. This new range of Finista products have been sourced from all over the globe and will allow you to offer your customers a selection of products that will finish with style your next project.
Wardrobe Rail Solutions.2 Wardrobe Accessories.4 FEG Wardrobe System.9 Ironing Boards.16 Laundry Accessories.17 Vents.19 LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.1 A.2
WARDROBE RAIL SOLUTIONS ROUND TUBE RAIL Qty 10 ø Finish Tube Ø Length Code White 25mm 4m 1-491-170 Stainless Steel 19mm 3m 1-491-181 Chrome Plated 19mm 3.6m 1-491-186 Chrome Plated 25mm 3.6m 1-491-188 CHROE FLANGE TO SUIT ROUND TUBE RAIL ø c/c Suits round tube rail 1-490-250 has 200 per box Finish Suits Tube Ø C/C Code Chrome Plated 19mm 36mm 1-490-190 Chrome Plated 25mm 45mm 1-490-250 WHITE FLANGE TO SUIT ROUND TUBE RAIL Suits 25mm round tube rail (1-491-188, 1-491-170) Qty 100 Qty 1000 ø c/c Finish Suits Tube Ø C/C Code White Plastic 25mm 36 mm 1-490-251 CENTRE PILLAR TO SUIT ROUND RAIL Suits round tube rail c/c Qty 100 ø Finish Suits Tube Ø C/C Code Chrome Plated 19mm 36mm 1-490-192 Chrome Plated 25mm 42mm 1-490-252 END PILLAR TO SUIT ROUND RAIL c/c Suits round tube rail 1-149-254 has 50 pieces per box Qty 100 ø Finish Suits Tube Ø C/C Code Chrome Plated 19mm 36mm 1-490-194 Chrome Plated 25mm 42mm 1-490-254.2 OFFICE, SHOP & WARDROBE SYSTES Dimension data and specifications may change without notification.
WARDROBE RAIL SOLUTIONS OVAL TUBE RAIL Aluminium tubing has 5 per bundle Steel (1mm thick) tubing has 10 per bundle 30 15 Finish aterial Length Code Chrome Plated Steel 3.6m 1-491-195 White Powder Coat Aluminium 4m 1-491-191 Bright Chrome Aluminium 3.6m 1-491-196 screw-on knock-in 15 12 15 12 FLANGE TO SUIT OVAL RAIL Suits oval tube rail Knock-in version suits system 32 1-490-300 has 50 pieces per bag Finish Style Code White Plastic Screw-on 1-490-300 Chrome Plated Knock-in 1-490-350 Chrome Plated Screw-on 1-490-400 CENTRE PILLAR TO SUIT OVAL RAIL Suits oval tube rail Qty 100 3.8 46 32 75 30.5 16 Finish Suits Tube C/C Code Chrome Plated Oval 32mm 1-490-430 END PILLAR TO SUIT OVAL RAIL Suits oval tube rail 3.8 46 32 75 30.5 16 Finish Suits Tube C/C Code Chrome Plated Oval 32mm 1-490-431 LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.3 A.2
WARDROBE ACCESSORIES ABOS SUPER LIFT WARDROBE HANGER pc C*1pc Hydraulic device Adjustable arm verticality Steel mechanism Grey/chrome finishes Load capacity 20kg min 75cm - max 115cm 20 kg Y=The thickness of cabinet panel. FINISTA DRAWER PULLOUT 91cm 5.5cm Description Internal Cabinet Width Code Ambos Super Lift Hanger 750mm-1150mm 1-490-450 Description Size Code Ambos Super Lift Spacer 20mm 1-490-452 All baskets come with front attachment bracket as standard Soft close runners Load capacity = 40kg Kit includes: 1 x basket, 2 x runners, 1 x front attachment bracket (pair) Suits 16-19mm board 51cm 29cm 76cm Note: Unit setback from the cabinet edge is 37mm Drawer Height External Cabinet Width Internal Cabinet Height External Cabinet Depth Basket Code 135mm 450mm 160mm min. 515mm min. Chrome 1-471-020 135mm 600mm 160mm min. 515mm min. Chrome 1-471-021 135mm 900mm 160mm min. 515mm min. Chrome 1-471-022 200mm 450mm 225mm min. 515mm min. Chrome 1-471-023 200mm 600mm 225mm min. 515mm min. Chrome 1-471-024 200mm 900mm 225mm min. 515mm min. Chrome 1-471-025.4 OFFICE, SHOP & WARDROBE SYSTES Dimension data and specifications may change without notification.
X Wardrobe & Laundry Solutions WARDROBE ACCESSORIES FINISTA PULLOUT PANT RACK Soft close runner Housing: aluminium with satin chrome finish Rails: steel with satin chrome finish Suits 16-19mm board External Cabinet Width (X) Internal Cabinet Depth Rails Code 450mm 400mm min. 7 1-472-002 600mm 400mm min. 10 1-472-003 900mm 400mm min. 17 1-472-004 FINISTA SLIDE OUT PANT RACK Universal left or right installation Housing: steel with satin chrome finish Rails: steel with satin chrome finish External Cabinet Width Internal Cabinet Depth Rails Code 450mm min 480mm min. 10 1-472-005 FINISTA PULLOUT SHOE RACK Soft close runner Attaches to side of cabinet Chrome finish Can install multiple rows above each other Suits 16-19mm board External Cabinet Width (X) Internal Cabinet Depth Pairs Code 600mm 550mm min. 4-6 1-472-000 900mm 550mm min. 10-12 1-472-001 LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.5 A.2
WARDROBE ACCESSORIES FINISTA SLIDE OUT ROD Universal left or right installation Steel with satin chrome finish Great for hanging clothes hangers on 28.8 350 80.5 Internal Cabinet Width Internal Cabinet Depth Code 50mm min 385mm 1-472-010 FINISTA SLIDE OUT BELT RACK 87.5 350 56 Universal left or right installation Steel with satin chrome finish Internal Cabinet Width Internal Cabinet Depth Positions Code 100mm min 385mm 7 1-472-011 FINISTA SLIDE OUT TIE RACK Universal left or right installation Steel with satin chrome finish 350 60 78.2 Internal Cabinet Width Internal Cabinet Depth Positions Code 100mm min 385mm 16 1-472-012 TIE RACK - SLIDE RAIL Screw-on side mount Slide out rail for easy access Length: 360mm Holds 23 ties Finish Code Satin Chrome / Black Plastic 1-491-155.6 OFFICE, SHOP & WARDROBE SYSTES Dimension data and specifications may change without notification.
WARDROBE ACCESSORIES COAT RACK - 5 HOOKS Universal left or right installation Chrome finish Screws included 75mm 65mm Width Depth Height Code 350mm 30mm 52mm 1-490-272 HAT & COAT HOOK 75mm projection Finish Code Chrome Plated 1-490-270 WARDROBE SUSPENSION SUPPORT BRACKET Load carrying capacity 130kg per wall cupboard System 32 Qty 100 Finish Type Code White Powder Coat Left Hand 1-491-230 White Powder Coat Right Hand 1-491-240 LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.7 A.2
Walk-in wardrobes with Italian style The FEG system is an exceptional concept for walk-in wardrobes. FEG offers a complete solution that combines hanging drawer unit hardware, hanging rods and clothing accessories to create a wardrobe system that deliveries flexibility during construction and installation. ade in Italy, its unique design creates an open structure that will suit any linear, L-shaped or C-shaped wardrobe composition.
FEG WARDROBE SYSTE 33mm 37.5mm 15mm SIDE VERTICAL UPRIGHTS For panelling H 2397mm 18mm Side Vertical Uprights Anodised Aluminium 1-611-025 50mm CENTRAL VERTICAL UPRIGHTS For panelling H 2397mm 27mm 18.5mm 19mm 47mm 27mm 18mm 54mm Central Vertical Uprights Anodised Aluminium 1-611-026 CORNER VERTICAL UPRIGHTS For panelling H 2397mm Corner Vertical Uprights Anodised Aluminium 1-611-028 SUARY DIAGRA OF VERTICAL UPRIGHTS ASSEBLY LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.9 A.2
FEG WARDROBE SYSTE 20mm 19mm 14.5mm PLINTH 2100mm length Always required for panelling Creates footboard Requires an adjustable foot (1-611-065) in each corner Adjustable foot. Sloted into plinth and fixed to underside of footboard 995mm 508mm Plinth Anodised Aluminium 1-611-038 PLINTH END CAP Clip on Plinth End Cap Grey Plastic 1-611-039 SUPPORT FOOT For panel adjustable in height Recommended 1 piece each per upright See Plinth (1-611-038) Support Foot Galvanised Steel 1-611-040 57mm ADJUSTABLE FOOT For footboard adjustment One per corner 20mm Adjustable Foot Steel 1-611-065 PANEL CLIP 60mm With screws 6 clips required per panel 11.5mm Central Vertical Uprights ill Finish 1-611-041.10 OFFICE, SHOP & WARDROBE SYSTES Dimension data and specifications may change without notification.
FEG WARDROBE SYSTE 30mm SUPPORT BRACKET - RIGHT 117mm Right bracket Includes caps 34mm 20mm 325mm Support Brackets Grey Powdercoated Steel 1-611-042 117mm 325mm 30mm 24mm Ø13mm 34mm 20mm SUPPORT BRACKETS - LEFT/CENTRAL Left/central bracket Includes caps Support Brackets Grey Powdercoated Steel 1-611-043 PIN FOR SHELF 4 pins required per shelf For attaching shelf board to support brackets See :12 for details Pin for Shelf Steel 1-611-044 30mm 4mm HANGING KIT Hanging kit for drawer unit To suit panelling and non panelling For attaching drawer unit to panelling or frame See :12 for details Hanging Kit Steel 1-611-045 LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.11 A.2
FEG WARDROBE SYSTE SHELF ASSEBLY 1. Fit the fastening pins to the shelf. 2. Drop the shelf into position between the support brackets. 3. Insert the closing caps as shown in the drawing below. 4. Use fastening screw to the back closing cap to avoid accidental removal of shelf. Fastening pin 1 Fastening screw Rear cap with hole for middle closing Fastening screw Rear cap with hole for side closing 4 2 ASSEBLY OF HANGING DRAWER UNITS Front cap without hole for side closing Front cap without hole for middle closing Drawer units are hung by the support brackets. A hanging kit is used to fasten the top of the drawer unit to the bracket. A spacer adjustment is used at the rear to level the drawer unit. 1. Fit the relevant spacer (depending on panel or non-panel version) on the back of the drawer unit. 2. Adjust to determine drawer level. IPORTANT: Hanging drawer unit should not be mounted in front of glass/mirror panelling or soft vinyl panelling. Short spacer for walk-in wardrobe with panelling Long spacer for walk-in wardrobe without panelling.12 OFFICE, SHOP & WARDROBE SYSTES Dimension data and specifications may change without notification.
FEG WARDROBE SYSTE CLOTHES RAIL 30mm To suit nominal space of 995mm Actual length 993mm 15mm Clothes Rail Grey Powdercoated Steel 1-611-059 20mm 75mm 18mm RAIL SUPPORT BRACKET Suits clothes rail Rail Support Bracket Grey Powdercoated Steel 1-611-055 RAIL SUPPORT CAP End cap for rail support bracket Required for exposed ends Rail Support Cap Grey Plastic 1-611-056 ASSEBLY OF HANGING RAILS 1. If fitting a clothes rail, fit the rail support into underside of the support bracket and fasten with screw supplied. 2. Insert closing caps. Note: Back caps are fastened to the bracket to prevent accidental removal of shelf. Front cap without hole for middle closing Screw 5A x 35 Front cap without hole for side closing Screw 5A x 35 L/H support Rail holder Hanging rail for clothes LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.13 A.2
FEG WARDROBE SYSTE ASSEBLY OF ALUINIU FRAE To suit trouser rack / linen baskets: 1. Fasten the right hand and left hand spacers with Blum runners under the shelf, using the screws supplied. 2. Slide the aluminium frame into the runners. 3. Insert either the trouser rack / linen baskets into the aluminium frame. NOTE: Accessory frame includes Blum TANDE runner. R/H spacer Sliding guide L/H spacer Self-tapping screw Aluminium frame Insert accessories: Insert accessories Trouser Pant rack rack Linen Linen baskets baskets Tray Sliding guide Aluminium frame Position 1 Position 2 Spacer Special screw.14 OFFICE, SHOP & WARDROBE SYSTES Dimension data and specifications may change without notification.
FEG WARDROBE SYSTE 470mm(D) 507mm(W) PULL OUT FRAE To suit maximum shelf width 625mm (small) & 975mm (large) Suits trouser racks & linen baskets (see below) Includes Blum TANDE runners 470mm(D) 858mm(W) Description Width (W) Depth (D) Finish Code Small Pull-Out Frame 507mm 470mm Anodised Aluminium 1-611-073 Large Pull-Out Frame 858mm 470mm Anodised Aluminium 1-611-074 TROUSER RACK Requires FEG Pull-Out Frame 1-611-073 (small) or 1-611-074 (large) 395mm 420mm 793mm 420mm Description Width (W) Depth (D) Finish Code Small Trouser Rack 395mm 420mm Anodised Aluminium 1-611-075 Large Trouser Rack 793mm 420mm Anodised Aluminium 1-611-076 LINEN BASKET Requires FEG Pull-Out Frame 1-611-073 (small) or 1-611-074 (large) 395mm 790mm 420mm 420mm Description Width (W) Depth (D) Finish Code Small Linen Basket 395mm 420mm Cream Linen 1-611-079 Large Linen Basket 790mm 420mm Cream Linen 1-611-080 LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.15 A.2
IRONING BOARDS DRAWER PULLOUT IRONING BOARD Drawer pullout system Conceals ironing board behind a drawer for easy access Full extension slides Cabinet requirements: external cabinet width: 400mm - 500mm, minimum internal cabinet depth: 510mm, minimum internal cabinet height: 120mm Board size: 950mm x 300mm cabinet guide slide work area (h) 30er 40er X 74 64 countersunk screws 4.5 x 15 or Euro-screws 6.3 x 13 diagram B diagram A 2 h 34 194 400 (450) 304 (354) 416 32 X X = 44 + door cushion face Y = 32 + door cushion face 50 11 32 X 32 Y External Cabinet Width Finish Code frontis plate 400mm - 500mm White 1-468-040 guide side Ironing Board Cover - Replacement 1-467-033 guide side frontis plate ironing board FINISTA LAUNDRY VALET Wall mount Chrome plated steel frame Adjustable height Holds six items support bracket angle suppor suppo Length Depth Height Code 276mm 76mm 268mm 1-472-021.16 OFFICE, SHOP & WARDROBE SYSTES Dimension data and specifications may change without notification.
IRONING BOARDS & LAUNDRY ACCESSORIES FINISTA PULLOUT IRONING BOARD Universal left or right hand installation Chrome plated steel frame Soft close runner in cabinet depth 400mm in cabinet width 200mm Length when folded out 950mm Adjustable feet + or - 65mm 340mm 930-995mm 950mm 1380mm Width Depth Height Code 140mm 340mm 1380mm 1-472-022 FINISTA IRON HOLDER Wall mount Chrome plated steel frame Width Depth Height Code 145mm 130mm 260mm 1-472-020 LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.17 A.2
LAUNDRY ACCESSORIES FINISTA VACUU CLEANER STORAGE PULLOUT RACK Universal left or right hand installation Chrome plated steel frame Soft close runner Load capacity 40kg inimum cabinet depth 500mm inimum cabinet width 400mm Width Depth Height Code 348mm 483mm 1150mm 1-472-023 BROOSTICK HOLDER WITH RUBBER ROLLERS aterial - galvanised steel/rubber Wall mount Suits 23-28mm broomstick Width Height Depth Code 51mm 50mm 40mm 1-468-045.18 OFFICE, SHOP & WARDROBE SYSTES Dimension data and specifications may change without notification.
VENTS ALUINIU ULTI-PURPOSE VENT Cutting Size (L x W) Overall Size (L x W) Finish Code 278mm x 65mm 300mm x 80mm Anodised Aluminium 1-477-900 CUPBOARD VENT - ROUND Plastic Cutting Size Overall Size Finish Code Ø 28mm Ø 40mm White 1-477-912 Ø 28mm Ø 40mm Black 1-477-909 EDIU CUPBOARD VENT - RECTANGULAR Plastic Cutting Size (L x W) Overall Size (L x W) Finish Code 124mm x 60mm 135mm x 80mm White 1-477-915 LARGE CUPBOARD VENT - RECTANGULAR Plastic Cutting Size (L x W) Overall Size (L x W) Finish Code 216mm x 108mm 245mm x 130mm White 1-477-918 WALL / DOOR VENT - RECTANGULAR Plastic Cutting Size (L x W) Overall Size (L x W) Finish Code 216mm x 115mm 230mm x 130mm White 1-477-921 LINCOLN SENTRY OFFICE, SHOP & WARDROBE SYSTES.19 A.2