MAGNETIC PRODUCTS DATA SHEET File under Magnetic Products, MA1 1997 Nov 21
CORES Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1).98 mm 1 V e effective volume 47 mm 3 I e effective length 68. mm A e effective area 69. mm 2 A min minimum area 66. mm 2 m mass of core half 12 g handbook, halfpage 15.15 11.2.3 3.8 22.4.75 14.6.25 9.1.2.75 4.9.15 MGC183 Dimensions in mm. Fig.1 core half. Core halves and sets Clamping force 7 ±2 N. GRADE A L (nh) µ e AIR GAP (µm) TYPE NUMBER 3C3 195 ±25% 155-3C3 3C85 21 ±25% 165-3C85 3C9 21 ±25% 165-3C9 3F3 16 ±3% 126 5-3F3-A16-S 25 ±3% 195 35-3F3-A25-S 315 ±5% 25 25-3F3-A315-S 4 ±5% 315 2-3F3-A4-S 63 ±1% 5 12-3F3-A63-S 19 ±25% 15-3F3 3F4 16 ±3% 126 5-3F4-A16-S 25 ±3% 195 35-3F4-A25-S 315 ±5% 25 25-3F4-A315-S 4 ±5% 315 2-3F4-A4-S 63 ±1% 5 12-3F4-A63-S 15 ±25% 82-3F4 1997 Nov 21 2
Properties of core sets under power conditions B (mt) at CORE LOSS (W) at GRADE H = 25 A/m; f = 25 khz; f = 1 khz; f = 4 khz; f=1mz; f = 3 MHz; f = 25 khz; Bˆ = 2 mt; Bˆ = 1 mt; Bˆ =5mT; Bˆ =3mT; Bˆ =1mT; T = 1 C T = 1 C T = 1 C T = 1 C T = 1 C T = 1 C 3C3 36.5.54 3C85 32.74.86 3C9 33.5.54 3F3 315.54.91 3F4 3 1. 1.6 COIL FORMERS General data PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with UL 94V- ; UL file number E167521(M) copper-tin alloy (CuSn), tin-lead alloy (SnPb) plated 18 C, IEC 85 class H IEC 68-2-2, Part 2, Test Tb, method 1B, 35 C, 3.5 s IEC 68-2-2, Part 2, Test Ta, method 1: 235 C, 2 s handbook, full pagewidth 21.55.2 5.5 16.4.15 14.95.15 21.7.2 (2.1 min) 12.5 max 12.2 5.2.1 6.6.1 27.5 3.6 5 O.8 15 25.2 max 27.5 31.2 max 1.3.15 MGC184 Dimensions in mm. Fig.2 coil former; 12-pins. Winding data for coil former with 12-pins NUMBER OF SECTIONS WINDING AREA (mm 2 ) MINIMUM WINDING WIDTH (mm) 1997 Nov 21 3 AVERAGE LENGTH OF TURN (mm) TYPE NUMBER 1 52.3 2.1 52.9 CSH--1S-12P
MOUNTING PARTS General data ITEM REMARKS FIGURE TYPE NUMBER Clip stainless steel (CrNi); clamping force 35 N 3 CLI- handbook, halfpage 5 8 34 28.3 MGC185 5.5 Dimensions in mm. Fig.3 mounting clip. 1997 Nov 21 4
DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype Design-in Preferred Support These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 1997 Nov 21 5
a worldwide company Australia: Philips Components Pty Ltd., NORTH RYDE, Tel. (2) 985 4455, Fax. (2) 985 4466. Austria: Österreichische Philips Industrie GmbH, WIEN, Tel. (1) 61 1 12 41, Fax. (1) 6 11 12 11. Belarus: Philips Office Belarus, MINSK, Tel. (5172) 2 924/733, Fax. (5172) 2 773. Benelux: Philips Nederland B.V., EINDHOVEN, NL, Tel. (+31 4) 2783 749, Fax. (+31 4) 2788 399. Brazil: Philips Components, SÃO PAULO, Tel. (11) 821 2333, Fax. (11) 829 1849. Canada: Philips Electronics Ltd., SCARBOROUGH, Tel. (416) 292 5161, Fax. (416) 754 6248. China: Philips Company, SHANGHAI, Tel. (21) 6354 188, Fax. (21) 6354 16. Denmark: Philips Components A/S, COPENHAGEN S, Tel. (32) 883 333, Fax. (31) 571 949. Finland: Philips Components, ESPOO, Tel. () 9 615 8, Fax. () 9 615 851. France: Philips Composants, SURESNES, Tel. (1) 499 6161, Fax. (1) 499 6493. Germany: Philips Components GmbH, HAMBURG, Tel. (4) 2489-, Fax. (4) 2489 14. Greece: Philips Hellas S.A., TAVROS, Tel. (1) 4894 339/(1) 4894 239, Fax. (1) 4814 24. Hong Kong: Philips Hong Kong, KOWLOON, Tel. 2784 3, Fax. 2784 33. India: Philips India Ltd., MUMBAI, Tel. (22) 493 311, Fax. (22) 493 966/495 34. Indonesia: P.T. Philips Development Corp., JAKARTA, Tel. (21) 794 4, Fax. (21) 794 8. Ireland: Philips Electronics (Ireland) Ltd., DUBLIN, Tel. (1) 76 4 23, Fax. (1) 76 4 21. Israel: Rapac Electronics Ltd., TEL AVIV, Tel. (3) 645 444, Fax. (3) 6491 7. Italy: Philips Components S.r.l., MILANO, Tel. (2) 6752 2531, Fax. (2) 6752 2557. Japan: Philips Japan Ltd., TOKYO, Tel. () 3 374 5135, Fax. () 3 374 535. Korea (Republic of): Philips Electronics (Korea) Ltd., SEOUL, Tel. (2) 79-1472, Fax. (2) 79 148. Malaysia: Philips Malaysia SDN Berhad Components Division, PULAU PINANG, Tel. (3) 75 5213, Fax. (3) 757 488. Mexico: Philips Components, EL PASO, U.S.A., Tel. (915) 772 42, Fax. (915) 772 4332. New Zealand: Philips New Zealand Ltd., AUCKLAND, Tel. (9) 815 4, Fax. (9) 849 7811. Norway: Norsk A/S Philips, OSLO, Tel. (22) 74 8, Fax. (22) 74 8341. Pakistan: Philips Electrical Industries of Pakistan Ltd., KARACHI, Tel. (21) 587 4641-49, Fax. (21) 577 35/587 4546. Philippines: Philips Semiconductors Philippines Inc., METRO MANILA, Tel. (2) 816 6345, Fax. (2) 817 3474. Poland: Philips Poland Sp. z.o.o., WARSZAWA, Tel. (22) 612 2594, Fax. (22) 612 2327. Portugal: Philips Portuguesa S.A., Philips Components: LINDA-A-VELHA, Tel. (1) 416 316/416 3333, Fax. (1) 416 3174/416 3366. Russia: Philips Russia, MOSCOW, Tel. (95) 755 6918, Fax. (95) 755 6919. Singapore: Philips Singapore Pte Ltd., SINGAPORE, Tel. 35 2, Fax. 355 1758. South Africa: S.A. Philips Pty Ltd., JOHANNESBURG, Tel. (11) 47 5911, Fax. (11) 47 5494. Spain: Philips Components, BARCELONA, Tel. (93) 31 63 12, Fax. (93) 31 42 43. Sweden: Philips Components AB, STOCKHOLM, Tel. (+46) 8 632 2, Fax. (+46) 8 632 2745. Switzerland: Philips Components AG, ZÜRICH, Tel. (1) 488 22 11, Fax. (1) 481 77 3. Taiwan: Philips Taiwan Ltd., TAIPEI, Tel. (2) 2134 29, Fax. (2) 2134 2929. Thailand: Philips Electronics (Thailand) Ltd., BANGKOK, Tel. (2) 745 49, Fax. (2) 398 793. Turkey: Türk Philips Ticaret A.S., GÜLTEPE/ISTANBUL, Tel. (212) 279 277, Fax. (212) 282 677. United Kingdom: Philips Components Ltd., DORKING, Tel. (136) 512, Fax. (136) 512 345. United States: Display and Wire Wound Components, ANN ARBOR, MI, Tel. (313) 996 94, Fax. (313) 761 2776. Magnetic Products, SAUGERTIES, NY, Tel. (914) 246 2811, Fax. (914) 246 487. Passive Components, SAN JOSE, CA, Tel. (48) 57 56, Fax. (48) 57 57. Yugoslavia (Federal Republic of): Philips Components, BELGRADE, Tel. () 11 625 344/373, Fax. () 11 635 777. For all other countries apply to: Philips Components, Marketing Communications, P.O. Box 218, 56 MD EINDHOVEN, The Netherlands, Fax. +31-4-2724 547. COD16 Philips Electronics N.V. 1997 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands