Products 1
IMM Performance Products - General Purpose Screws The ideal choice for your Van Dorn Demag machine in non filled material applications. 30mm 35mm 38mm 40mm 50mm 57mm 65mm 69/65mm 69mm 75mm 80mm 90mm 105mm 3oz 5oz 6 oz 4,6,8 oz 12,14 oz 20 oz 30 oz 35 oz 35 oz 48 oz 60 oz 80 oz 125 oz 352768-01 352782-01 352778-01 352757-01 352767-01 352761-01 352762-01 352763-01 7R130 352764-01 352721-01 352766-01 352775-01 45mm/500 10.7 oz 50mm/720 14.7oz. 60mm/1220 25.4oz. 70mm/1920 40.3oz. 80mm/2800 59.2oz. 95mm/4300 89.6oz. 110mm/6800 139.1oz. $720 $790 $865 $880 $995 $1175 $1580 $1710 $1725 $2010 $2065 $2920 $4235 GP Screw Applications- Non-Filled Materials Specifications- Base Materials: 135-M Nitralloy Surface Treatment: Ion Nitrided C/R: 3:1 L/D 20:1 The ion nitriding process provides maximum surface hardness, improved fatigue and tensile strength to the core material, and a distortion free dimensionally stable finished product. Designed to the exact specifications of your Van Dorn Machine. 352749-01 353135-01 353136-01 353137-01 353138-01 353139-01 353140-01 $1030 $1075 $1440 $1770 $2185 $3340 $4350 2
The Wear-Resistant TM CPM screws are entirely made of CPM super tough material rather than just a surface treatment. This allows for great wear protection over the entire length of the screw. Wear Resistant TM CPM Screws TM CPM steel has high amounts of carbon and vanadium. It is one of the best alternatives for processing materials containing glass fibers or other abrasive fillers and flame retardants. Looking for alternatives? Contact IMM Performance Products. We offer screws from various manufacturers and can quote one to fit your budget and need. Contact an IMM Performance Products Representative today. 3 IMM Performance Products - Wear-Resistant CPM Screws
IMM Performance Products - Wear- Resistant CPM Screws 30mm 3oz. 35mm 5oz. 38mm 6oz. 40mm 4,6,8,oz. 50mm 12,14oz. 57mm 20oz. 65mm 30oz. 69/65mm 35oz. 75mm 48oz. 80mm 60oz. 352768-05 352782-05 352778-05 352757-05 352767-05 352761-05 352762-06 352763-06 352764-06 352721-06 2:1 Wear- Resistant CPM Screws. TM Applications- Materials filled with more than 30% glass abrasives or flame retardants. Also for processing at high speeds. Specifications- Base Materials: CPM Surface Treatment: none C/R: 3:1 & 2:1 L/D 20:1 $1425 $1475 $1520 $1630 $2585 $3095 $3115 $3550 $4320 $5050 30mm 3oz. 35mm 5oz. 38mm 6oz. 40mm 4,6,8,oz. 50mm 12,14oz. 57mm 20oz. 65mm 30oz. 69/65mm 35oz. 75mm 48oz. 80mm 60oz. 3:1Wear- Resistant CPM Screws 352808-05 352812-05 352815-05 352822-05 352823-05 352826-05 352856-05 352862-05 352864-05 352865-05 TM $1425 $1475 $1520 $1870 $2870 $3230 $3925 $4895 $6170 $7220 For sizes above 80mm use our hard-faced screw 4
5 Rotating Ram Standard B Screw Size 45mm/500 10.7oz. 50mm/720 14.7oz. 60mm/1220 25.4oz. 70mm/1920 40.3oz. 80mm/2800 59.2oz. Part Number and Price 3:1 2:1 352749-05 $2255 353135-05 $3145 353136-05 $4580 353137-06 $4860 353138-06 $6390 353143-05 $2310 353144-05 $3145 353145-05 $4580 353146-05 $6730 353147-05 $9315 Rotating Ram High pressure A Screw Size Part Number and Price 3:1 2:1 40mm/500 8.5oz 45mm/720 11.9oz. 50mm/1220 17.6oz. 60mm/1920 29.6oz. 70mm/2800 45.4oz. 80mm/4300 63.5oz. 353560-05 $2440 353561-05 $2595 353562-05 $3620 353563-05 $5270 353564-06 $5590 353565-06 $6975 353567-05 $2458 353568-05 $2595 353569-05 $3620 353570-05 $5270 353571-05 $7740 353572-05 $10155 For sizes above 80mm use our hard-faced screw IMM Performance Products - Wear-Resistant CPM Screws
IMM Performance Products - Wear- Resistant Screws CPM Screws Hard Faced screw for better flight wear protection Colmonoy 56, a nicklebased alloy, is welded to the width of the flights. The flights are then machined finished to a thickness of.060 and then case hardened. Recommended with a bimetallic barrel. 90mm 105mm 80oz. 125oz. 115mm 165oz. 135mm 155mm 260oz. 400oz. Rotating Ram Standard B Screw 352766-02 352775-02 352780-02 352798-02 352801-02 95mm/4300 89.6oz. 110mm/6800 139.1oz. 353139-02 313540-02 Rotating Ram Standard A Screw $6190 $7410 95mm/6800 103.7oz. 353566-02 $7120 $4525 $5650 $7250 $9750 $18785 Applications- Less than 30% glass-filled material. Specifications- Base Materials: 135-M Nitralloy Flights: Colmonoy 56 or equivalent Roots: Ion Nitrided C/R: 3:1 L/D 20:1 6
7 New Product Carbide Coated Wear Resistant Screws for maximum wear and corrosion resistance. This premium coating is applied using a thermal spray technology. The surface of the screw is crack-free with a finish that is acceptable throughout the industry. An excellent choice for materials filled with more than 30% abrasives. Choosing the right screw can be difficult. IMM Performance Products makes it easy by offering expert advice and service before, during, and after the purchase. Give IMM Performance Products a call today to see if we can help you out with your processing problems. from Applications-Materials filled with more than 30% glass abrasives, corrosives or flame retardants. Specifications- Base Materials: 4140 HT Surface Treatment: Tungsten Carbide Hardness 73 Rc IMM Performance Products - Wear-Resistant CPM Screws
IMM Performance Products - 2:1 Wear- Corrosion Resistant and Wear-Resistant CPM Screws 2:1 Corrosion and Wear-Resistant Screws 30mm 35mm 38mm 40mm 50mm 57mm 65mm 3oz 5oz. 6oz. 4,6,8oz. 12,14oz 20oz. 30oz 69/65mm 35oz 69mm 75mm 80mm 90mm 105mm 115mm 135mm 155mm 35oz 48oz 60oz 80oz 125oz 165oz 260oz 400oz Now made with stainless steel through 80mm 352808-04 352812-04 352815-04 352822-04 352823-04 352826-04 352856-04 352862-04 7r124 Col/Chr 352864-04 352865-04 352866-03 352876-03 352881-03 352888-03 352891-03 Applications-Recommended for all heat sensitive materials such as ABS & Polycarbonate. Also PVC and other corrosive materials. Specifications-Through 80mm Base material: Stainless Steel Flights: Colmonoy 56 or equivalent $1780 $1830 $1915 $2065 $2430 $2610 $3490 $4115 Inquire $4180 $4520 $4710 $6135 $6250 $10,165 Inquire Suggested to use with: ABS Acrylic Polycarbonate HIPS Polyphenylene Oxide (PPO) Polyetherimide Polysulfone Polyphenylene Sulfide (PPS) Styrene-Acrylonitrile Nitrile (SAN) Rigid PVC Thermoplastic Polyesters (PBT) Thermoplastic Elastomers Thermoplastic Urethanes Larger than 80mm and 69mm- Base Material: 4140 Flights: Colmonoy 56 or equivalent Roots: Chrome Plated 8
2:1 Corrosion and Wear-Resistant Screws for Rotating Ram Rotating Ram Standard B Screw 45mm/500 50mm/720 60mm/1220 70mm/1920 80mm/2800 95mm/4300 10.7oz. 14.7oz 25.4oz 40.3oz 59.2oz 89.6oz 110mm/6800 139.1oz. 353143-04 353144-04 353145-04 353146-04 353147-04 353148-03 353149-03 Rotating Ram High Pressure A Screw 9 40mm/500 45mm/720 50mm/1220 60mm/1920 70mm/2800 80mm/4300 95mm/6800 8.5oz 11.9oz. 17.6oz 29.6oz 45.4oz 63.5oz 103.7oz 353567-04 353568-04 353569-04 353570-04 353571-04 353572-04 353573-03 $2645 $2690 $2790 $4090 $4690 $5155 $6625 $2930 $3045 $3095 $3210 $4705 $5395 $5675 Not exactly positive what press you have. No need to worry, call IMM Performance Products. We can help you out with choosing the proper screw for the right machine. IMM Performance Products -2:1 Corrosion and Wear Resistant Screws
IMM Performance Products - Wellert Wear- Barrier Resistant II Performance CPM Screws Provides: As much as 25% increased recovery rate Uniform material melt Lower melt temperature Reduced cycle time The Willert Barrier II utilizes a unique patented plasticizing section that steps up to the demands of high speed processing. The biggest advancements to the Willert Barrier II is the flight design. The screw not only lasts longer in a rough environment, but helps deliver as much as a 25% improvement in recovery rates. Willert Barrier II High Performance Screws Anatomy of the Barrier II Screw 1. Channel A (deep) 2. Channel A (shallow) 3. Channel B (shallow) 4. Channel B (deep) 5. Barrier flight 6. Primary flight 7. Barrier clearance 10
11 30mm 35mm 38mm 40mm 50mm 57mm 65mm 3oz 5oz. 6oz. 4,6,8oz. 12,14oz 20oz. 30oz 69/65mm 35oz 75mm 80mm 90mm 105mm 115mm 135mm 48oz 60oz 80oz 125oz 165oz 260oz 352774-04 352849-04 352850-04 352851-04 352852-04 352867-04 352868-04 352869-04 352870-04 352871-04 352872-03 352873-03 352874-03 352875-03 Willert Barrier II High Performance Screws $2410 $2430 $2705 $2850 $3660 $3685 $4365 $4875 $5435 $6100 $6210 $7810 $13700 $14960 Applications-Polypropylene, HDME (MI of 8 or higher), Nylon Polystyrene, LDPE, Closures, utensils, and other thin-wall parts when lowest cycle times are essential. Specifications-Through 80mm- Base Material: Stainless Steel Flights: Colmonoy 56 or equivalent Larger than 80mm - Base Material: 4140 Alloy Steel Flights: Colmonoy 56 or equivalent Roots: Chrome Plated C/R 2.14:1 L/D 20:1 IMM Performance Products -Willert Barrier II Performance Screws
IMM Performance Products - Wellert Wear- Barrier Resistant II Performance CPM Screws Willert Barrier II Rotating Ram Standard B and High Pressure A Screws Rotating Ram Standard B Screw Standard Length Long Length High Performance 25:1 High Performance 2.14:1 25:1 L/D 2.14:1 Hard-Faced Colmonoy Hard-Faced Colmonoy Per Code Per Code Size Barrier II Barrier II 45mm/500 50mm/720 60mm/1220 70mm/1920 80mm/2800 95mm/4300 10.7oz. 14.7oz 25.4oz 40.3oz 59.2oz 89.6oz 110mm/6800 139.1oz. 353589-04 $3255 353590-04 $3930 353591-04 $4245 353592-04 $4920 353593-04 $6120 353594-03 $6280 353595-03 $10690 Rotating Ram High Pressure A Screw 40mm/500 45mm/720 50mm/1220 60mm/1920 70mm/2800 80mm/4300 95mm/6800 8.5oz 11.9oz. 17.6oz 29.6oz 45.4oz 63.5oz 103.7oz 353659-04 353660-04 353661-04 353662-04 353663-04 353664-04 353665-03 354371-04 Inquire 354372-04 $4060 354373-04 $4545 354374-04 $5405 354375-04 $7135 354376-03 $9200 354377-03 $11215 $3285 $3745 $4195 $4415 $5110 $7040 $7240 12
High Performance Mixing Screw Patented Mixing Barrier Disperses Colorant Throughout the Material The patented mixing section provides a homogenous melt with excellent color dispersion. Ideal for non-shear sensitive materials such as polypropylene, polystyrene and polyethylene. Applications- Polyethylene, Polypropylene, Polystyrene, and all other general purpose materials. Specifications- Base Material: Nitralloy 135-M Surface Treatment: Ion Nitride C/R: 2.5:1 L/D 20:1 Sizes 105 and larger- Base Material: 4140 Alloy Steel Flights: Colmonoy 56 or equivalent Roots: Chrome Plated 13 30mm 35mm 38mm 40mm 50mm 57mm 65mm 3oz 5oz. 6oz. 4,6,8oz. 12,14oz 20oz. 30oz 69/65mm 35oz 69mm 75mm 80mm 90mm 105mm 115mm 135mm 155mm 35oz 48oz 60oz 80oz 125oz 165oz 260oz 400oz 335469 301624 311623 98787 57309 63447 57310 57311 316405 312320 57746 57767 317351 317447 317339 335728 $1685 $1570 $1585 $1620 $1880 $2070 $2230 $2260 $2550 $2810 $2940 $3880 $6775 $7875 $10900 $17520 IMM Performance Products -High Performance Mixing Screws
IMM Performance Products - Wellert Wear- Barrier Resistant IV Performance CPM Screws Willert Barrier IV Mixing Screw An Excellent General Purpose Screw for a wide range of processing and mixing capabilities. Applications-Streamlined design is ideal for heat sensitive materials such as polycarbonate, ABS, Vinyls, PET, etc. Specifications- Through 80mm- Base Material: CPM Larger than 80mm- Base Material: 4140 Alloy Steel Flights: Colmonoy 56 or equivalent Roots: Chrome Plated C/R 2.24:1 L/D 20:1 The Barrier IV Mixing is a special purpose screw which improves mixing and melt quality. This screw optimizes mixing and melt homogeneity through a barrier mixing section at the discharge end of the screw where the roots incorporate a matrix of eccentric flats. With the Barrier IV Mixing Screw, the pellets and melt are not separated but use the high viscosity of the melt to knead the plastics. The result is a high quality melt at low temperatures and an improved recovery rate of up to 20%. 14
Willert Barrier IV Mixing Screw 30mm 35mm 38mm 40mm 50mm 57mm 65mm 3oz 5oz. 6oz. 4,6,8oz. 12,14oz 20oz. 30oz 69/65mm 35oz 75mm 80mm 90mm 105mm 115mm 135mm 48oz 60oz 80oz 125oz 165oz 260oz 354359-06 354360-06 354361-06 354362-06 354363-06 354364-06 352953-06 352954-06 352955-06 352956-06 354365-03 354366-03 354367-03 352957-03 $1795 $1810 $2015 $2060 $2570 $3170 $3460 $4440 $5080 $5850 $4410 $5975 $7360 $13800 IMM Performance Products -Willert Barrier II Performance Screws 15
IMM Performance Products - Wellert Wear- Barrier Resistant IV Performance CPM Screws Willert Barrier IV Mixing Screw Rotating Ram Standard B Screw 45mm/500 50mm/720 60mm/1220 70mm/1920 80mm/2800 95mm/4300 10.7oz. 14.7oz 25.4oz 40.3oz 59.2oz 89.6oz 110mm/6800 139.1oz. 40mm/500 45mm/720 50mm/1220 60mm/1920 70mm/2800 80mm/4300 95mm/6800 8.5oz 11.9oz. 17.6oz 29.6oz 45.4oz 63.5oz 103.7oz 353641-06 353642-06 353643-06 353644-06 353645-06 353646-03 353647-03 Rotating Ram High Pressure A Screw 353763-06 353764-06 353765-06 353766-06 353767-06 353768-06 353769-03 Rotating Ram Standard B and High Pressure A Screw $2160 $2840 $3550 $5150 $6595 $5790 $10690 $2360 $2485 $3270 $4085 $5295 $7310 $6470 16
30mm 35mm 38mm 40mm 50mm 57mm 65mm Nylon 5:1 Nitrided Screws 3oz 5oz. 6oz. 4,6,8oz. 12,14oz 20oz. 30oz 69/65mm 35oz 69mm 75mm 80mm 90mm 105mm 115mm 135mm 35oz 48oz 60oz 80oz 125oz 165oz 260oz Applications: Unfilled Nylon 309552 96810 4R323 5R114 63941 6R308 IMM6965NY IMM69NY 343425 73730 IMM90NY 98422 IMM115NY 313485 Specifications: Base Material: 135-M Nitralloy Surface Treatment: Ion Nitrided C/R: 5:1 L/D 20:1 Higher compression for unfilled nylon N/A $1225 $1360 $1425 $1530 $1680 $1955 $2050 $2100 $2250 $2390 $3150 $4215 $5650 $7990 IMM Performance Products -Nitrided 5:1 Nylon Screws 17
IMM Performance Products - OEM Wear- Ion Resistant Nitrided CPM Barrels Screws OEM Ion Nitrided Barrels 30mm 3oz. 35mm 5oz. 38mm 6oz. 40mm 4,6,8,oz. 50mm 12,14oz. 57mm 20oz. 65mm 30oz. 69/65mm 35oz. 3R140 42445 64534 4R329 15251 63480 16579 6R320 Rotating Ram Use with Standard B Screw 20:1 $1080 $1180 $1355 $1395 $2300 $2670 $2955 $4870 45mm/500 10.7oz. 50mm/720 14.7oz. 60mm/1220 25.4oz. Applications: For general purpose materials: Polpropylene, Styrene, Plylene and other non-abrasive materials 351240 350768 351645 Specifications: Base material: 135-M Nitalloy Wear Surface: Ion Nitrided (.15 Deep ) Maximum psi: 20,000 Rotating Ram Maximum psi: 23,200 Designed and Manufactured by Van Dorn to exact product specifications $1820 $2240 $3515 18
19 30mm 35mm 38mm 40mm 50mm 57mm 65mm Abrasion Resistant Bimetallic Barrels 3oz 5oz. 6oz. 4,6,8oz. 12,14oz 20oz. 30oz 69/65mm 35oz 69mm 75mm 80mm 90mm 105mm 115mm 135mm 155mm 35oz 48oz 60oz 80oz 125oz 165oz 260oz 400oz 3R217 42032 64583 4R427 5R157 63481 6R310 6R413 7R123 306606 8R335 9R270 69017 38839 43028 85306 $1900 $1935 $2165 $2180 $2785 $3075 $3945 $4225 $5035 $4705 $5275 $6795 $8535 $11150 $17245 $27745 Ideal to combat abrasion which is created when resins are processed whose formulations contain glass or mineral filler of 20 percent or less content. The inside diameter of the 4140 steel barrel is centrifugally cast for its entire length with a boron-iron alloy modified with chromium. Applications: For all filled materials with 20%or less glass or mineral reinforcement Specifications: Lining Elements : Carbon, Nickel, Iron, Magnanese, Silicon, Boron, Chrome Rockwell Hardness: 58-65 Rc IMM Performance Products -Abrasion Resistant Bimetallic Barrels
IMM Performance Products - Abrasion Wear- Resistant Bimetallic CPM Barrels Screws Abrasion Resistant Bimetallic Barrels 45mm/500 50mm/720 For Use With Rotating Ram Standard B Screw and High Pressure A Screw Use with Rotating Ram Standard B Screw 60mm/1220 70mm/1920 80mm/2800 95mm/4300 10.7oz. 14.7oz 25.4oz 40.3oz 59.2oz 89.6oz 110mm/6800 139.1oz. 40mm/500 45mm/720 50mm/1220 60mm/1920 70mm/2800 80mm/4300 95mm/6800 8.5oz 11.9oz. 17.6oz 29.6oz 45.4oz 63.5oz 103.7oz 352670-01 $3180 352343-01 $3440 352671-01 $4265 351614-01 $5515 351673-01 $7485 352675-01 $8400 351617-01 $12965 Use With Rotating Ram High Pressure A Screw 3521245-01 351349-01 351650-01 352032-01 353379-01 353384-01 353389-01 Size 20:1L/D Bimetallic Price 25:1 L/D Bimetallic Price 355015-01 $4555 355016-01 $4610 355017-01 $4940 355018-01 $6775 355019-01 $9125 353899-01 $11595 353900-01 $17415 $3135 $3890 $4160 $5535 $7385 $8850 $11390 20
Manufactured from Tungsten Carbide and Nickel Alloy The Inductametals Ultramax Barrel comes with a 3-year guarantee. Abrasion & Corrosion Resistant Bimetallic Barrels An ideal choice when you are running corrosive materials, or materials that exceed 20% filler content. 30mm 35mm 38mm 40mm 50mm 57mm 65mm 3oz 5oz. 6oz. 4,6,8oz. 12,14oz 20oz. 30oz 69/65mm 35oz 75mm 80mm 90mm 105mm 115mm 135mm 48oz 60oz 80oz 125oz 165oz 260oz 334823-05 72707-05 333079-05 4R446-05 18499-05 18498-05 57703-05 68707-05 311281-05 8R506-05 9R349-05 99012-05 88389-05 For more information about IDM s Ultramax Barrel including warranty information, please give us a call. 21 $2785 $3135 $3350 $3375 $3920 $5235 $6400 $7940 $7965 $8635 $10520 $12875 $14985 331512-05 $26170 Applications: Glass or mineral filled materials greater than 30%, such as Nylon, Polypropylene, etc. High Temperature abrasive materials such as Ultem, Peek, Ryton, etc.: Materials containing corrosive flame retardant additives, Rigid PVC. Specifications: Lining Elements: tungsten Carbide Nickel Alloy Rockwell Hardness: 65 to 70 Rc IMM Performance Products -Abrasion & Corrosion Resistant Bimetallic Barrels
IMM Performance Products - Abrasion Wear- & Corrosion Resistant CPM BimetallicBarrels Screws Abrasion & Corrosion Resistant Bimetallic Barrels For Use With Rotating Ram Standard B and High Pressure A Screw 45mm/500 50mm/720 60mm/1220 70mm/1920 80mm/2800 95mm/4300 10.7oz. 14.7oz 25.4oz 40.3oz 59.2oz 89.6oz 110mm/6800 139.1oz. The Inductametals Ultramax Barrel comes with a 3-year guarantee. Use With Rotating Ram Standard B Screw 40mm/500 45mm/720 50mm/1220 60mm/1920 70mm/2800 80mm/4300 95mm/6800 8.5oz 11.9oz. 17.6oz 29.6oz 45.4oz 63.5oz 103.7oz 352670-05 $4240 352343-05 $4790 352671-05 $5960 351614-05 $8500 351673-05 $9870 352675-05 $11990 351617-05 $19940 Use With Rotating Ram High Pressure A Screw 351245-05 351349-05 351650-05 352032-05 353379-05 353384-05 353389-05 Size 20:1L/D Bimetallic Price 25:1 L/D Bimetallic Price 355015-05 $5480 355016-05 $5585 355017-05 $6435 355018-05 $8015 355019-05 $11490 353899-05 Inquire 353900-05 Inquire $4115 $4920 $5460 $7280 $9670 $12410 Inquire 22
23 Replacement Barrel Nozzle Adapters Genuine OEM-Manufactured end caps made by Size Standard Nitrided Barrel Bimetallic Barrel 30mm 35mm 38mm 40mm 3oz 5oz. 6oz. 4,6,8oz. 50/ 40 mm 12 oz. 50mm 57mm 65mm 12, 14oz. 20oz. 30oz 69/65mm 35oz Current Std. 69mm 75mm 80mm 90mm 105mm 115mm 135mm 155mm 35, 40oz 48oz 60oz 80oz 125oz 165oz 260oz 400oz 3R103 $235 40765 $245 64552 $275 13136 $290 73774 $605 15252 $325 63632 $360 16580 $375 6R321 $1175 7R103 $675 NA 8r102 $650 9R102 $1080 9R245 $1060 NA NA NA 3R103 $235 40765 $245 64552 $275 13136 $290 73774 $605 15252 $325 63632 $360 6R311 $440 7R103 $675 7R103 $675 88989 $690 8R336 $740 9R272 $970 9R245 $1060 38979 $1490 44401 $1900 86771 $2985 Specifications: Base Material: Alloy Steel 4140 Rockwell Hardness: 28-32 Rc IMM Performance Products -Abrasion & Corrosion Resistant Bimetallic Barrels
IMM Performance Products - OEM Wear- End Resistant Caps CPM Screws Replacement Barrel Nozzle Adapters 45mm/500 50mm/720 Genuine OEM-Manufactured end caps made by Use With Rotating Ram Standard B Screw 60mm/1220 70mm/1920 80mm/2800 95mm/4300 10.7oz. 14.7oz 25.4oz 40.3oz 59.2oz 89.6oz 110mm/6800 139.1oz. 40mm/500 45mm/720 50mm/1220 60mm/1920 70mm/2800 80mm/4300 95mm/6800 8.5oz 11.9oz. 17.6oz 29.6oz 45.4oz 63.5oz 103.7oz 351241 351265 351646 351613 351674 353002 352878 Use With Rotating Ram High Pressure A Screw 351246 351348 351651 353014 353011 353012 353013 End Caps for Rotating Ram Standard B or High Pressure A Screws $320 $375 $450 $660 $810 $1150 $1640 $360 $420 $490 $660 $810 $1215 $1740 24
25 General Purpose Non-Return Valve 30mm 35mm Ion Nitrided 3 Piece NRV made by Size Tip Check Ring Seat (3:1) 3oz. 5oz. 38mm new 6 oz 40mm 4, 6, 8 oz. 50mm 12,14 oz. 57mm 20oz. 65mm 30oz. 69mm 35oz. 75mm 48oz. 80mm 90mm 60oz. 80oz. 105mm 125oz. 115mm 165oz. 135mm 260oz. 155mm 400oz. 3R114 $160 73269 $165 64553 $170 4R268 $175 5R103 $185 63629 $195 6R248 $205 7R104 $260 8R103 $420 9R104 $660 9R248 $710 38837 $795 44404 $800 99041 $1885 3R115 $100 73270 $100 64550 $105 4R269 $105 5R104 $110 63630 $110 6R249 $115 7R105 $130 Available in Mallard 4-piece only. 8R104 $240 9R105 $245 9R246 $350 38836 $605 44403 $585 99042 $755 3R116 $125 73271 $135 64549 $135 4R270 $140 5R105 $145 63631 $160 6R250 $160 7R106 $180 8R105 $180 9R106 $185 9R247 $190 38835 $660 44402 $785 98583 $430 IMM Performance Products -Abrasion & Corrosion Resistant Bimetallic Barrels