Ultra Fast Charging Lithium Battery Market

Similar documents
The Lithium-Ion Battery. Service Life Parameters

Lithium Iron Phosphate High Current Rechargeable Lithium Ion Batteries

Performance Testing of Lithium-ion Batteries of Various Chemistries for EV and PHEV Applications

A Comparison of Lead Acid to Lithium-ion in Stationary Storage Applications

鋰 電 池 技 術 及 產 業 發 展 趨 勢

MAKING LITHIUM-ION SAFE THROUGH THERMAL MANAGEMENT

lithium iron phosphate

High Energy Rechargeable Li-S Cells for EV Application. Status, Challenges and Solutions

High capacity battery packs

Sony s Energy Storage System. The Sony Lithium Ion Iron Phosphate (LFP) advantage

Automotive Lithium-ion Batteries

SAFETY PERFORMANCE OF A LARGE FORMAT, PHOSPHATE BASED LITHIUM-ION BATTERY

Supercapacitors in Micro- and Mild Hybrids with Lithium Titanate Oxide Batteries: Vehicle Simulations and Laboratory Tests

LITHIUM-ION ENERGY MODULES HEM & HPM SERIES

How To Understand The Chemistry Of A Lithium Ion Battery

A comparative analysis of Lithium Iron Phosphate and Lead-Acid (flooded, gel and AGM) battery technology for marine applications

Energy Storage Systems Li-ion Philippe ULRICH

Addressing the Impact of Temperature Extremes on Large Format Li-Ion Batteries for Vehicle Applications

Second International Renewable Energy Storage Conference November 2007 Bonn/Germany. Overview on current status of lithium-ion batteries

State of Solid-State Batteries

- Founded in Dec by Dr. Volker Klein and Dipl.-Ing. Gerd Sievert.

How Much Lithium does a LiIon EV battery really need?

Smart Batteries and Lithium Ion Voltage Profiles

The Copernican Moment for Electronic Devices

Maritime Battery Technology , Lindholmen

Inside the Nickel Metal Hydride Battery

Future trends in the rechargeable battery market

Clean and energy-efficient vehicles Advanced research and testing Battery systems

Specification Approval Sheet

LEAD-ACID BATTERIES ARE NOT GOING AWAY A Technical Comparison of Lead-Acid and Lithium-ion Batteries

RECYCLING AND UPCYCLING SPENT LITHIUM-ION BATTERIES

DESIGN AND SIMULATION OF LITHIUM- ION BATTERY THERMAL MANAGEMENT SYSTEM FOR MILD HYBRID VEHICLE APPLICATION

A joint industry analysis of the technological suitability of different battery technologies for use across various automotive applications in the

Storage technologies/research, from physics and chemistry to engineering

Optimising the daily operation of industrial trucks

Lithium-ion energy storage systems. for large defense applications

IAA Commercial Vehicles Battery Technology. September 29 th, 2010

Lithium-ion battery technology: Getting the most from Smart Batteries

Virtual Battery Simulation Tools for Engineering

Electric Battery Actual and future Battery Technology Trends

Freque. Antigravity Batteries. battery cannot. limitations. difference. NOT use the. or racing and hard use. rider to put

Saft Li-ion battery systems for hybrid and electric vehicles. Increasing energy efficiency and meeting environmental challenges

Practical Examples of Galvanic Cells

Designing Applications with Lithium-Ion Batteries

REPORT: WP1.1 ELECTRIC VEHICLE TECHNOLOGY

Lithium Iron Phosphate Batteries

Alkaline-Manganese Dioxide

Comparative safety study of Lithium ion Batteries

Using Cell Balancing to Maximize the Capacity of Multi-cell Li-Ion Battery Packs

Managing A123 Cells with FMA Cell Balancing Technologies

Development of Grid-stabilization Power-storage Systems Using Lithium-ion Rechargeable Batteries

Control of High Efficiency PEM Fuel Cells for Long Life, Low Power Applications Part I

Lithium-Ion Battery Safety Study Using Multi-Physics Internal Short-Circuit Model

36V 14.5Ah ezee Flat Battery

Rechargeable Batteries in a Consumer Electronics World Tony Olson, January 2009

Evolion Li-ion battery. Saft s proven ultra-compact solution for telecom applications

Supercapacitors. Advantages Power density Recycle ability Environmentally friendly Safe Light weight

How To Test A123 Battery Module #5

Hybrid Electrical Energy Storage Systems

Battery Cell Balancing: What to Balance and How

Advanced Secondary Batteries And Their Applications for Hybrid and Electric Vehicles Su-Chee Simon Wang

What are the technical features and performance of the AccuCell system?

Cost and performance. of EV batteries. Final report. for. The Committee on Climate Change 21/03/2012. Project Name Document Name

Li-Polymer Battery Technology Specification

A Guide to the Safe Use of Secondary Lithium Ion Batteries in Notebook-type Personal Computers

Ni-Cd Memory: myth or fact?

Ultracapacitors Help P21 To Provide Fuel Cell Based Backup Power For Telecoms

Safety of lithium-ion batteries

Battery Energy Storage

Lithium Carbon Monofluoride Coin Cells in Real-Time Clock and Memory Backup Applications

Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble)

The Battery Saving Charger

High-power battery for back-up of telematic systems in cars

IEC nd Edition: All you need to know about the new standard

ELECTRIC VEHICLES WITH V2G

In The fastest growing battery system, lithium ion (Li-ion) batteries are used where high-energy density and

Saft battery system for electric and hybrid vehicles: Technical challenges. Tekes EVE Electric Vehicle Systems Seminar Helsinki, 18.

The Future of Battery Technologies Part I

European Batteries For the long run. Martti Tuomas Alatalo May, 2010

CLEAN ENERGY COUNCIL INTRODUCTION TO THIS REPORT

Energizer Non-Rechargeable Batteries: Frequently Asked Questions

Getting started with the Super Brain Palm computer interface.

PHEV Energy Storage Performance/Life/Cost Trade-off Analysis

Experimental Measurements of LiFePO 4 Battery Thermal Characteristics

#178 Maintenance and Care of 3M Powered Air Purifying Respirator (PAPR) Battery Packs

Capacitors for Power Grid Storage

Steve Harris. UC Berkeley

The Trouble with Lithium Implications of Future PHEV Production for Lithium Demand

Application Note: Use of Low Resistivity Surface Mount PPTC in Li-ion Polymer Battery Packs

DEIGN OF SIMPLE RECYCLING AC ELECTRICAL ENERGY GENERATION SYSTEM WITH SMALL DC INPUT & HIGH EFFICIENCY WITH GOOD LOAD HANDLING CAPABILITY

State-of-Health Estimation of Li-ion Batteries: Cycle Life Test Methods JENS GROOT

Working Towards Protection Guidance for Warehouse Storage Li-ion Batteries

Eveready Carbon Zinc (Zn/MnO ² ) Application Manual

1. Scope This specification is applied to ICR Product Specification Table 1 No. Item Rated Performance Remark

The ebike Rechargeable Battery Guide

Transcription:

Ultra Fast Charging Lithium Battery Market October 2012 Shmuel De-Leon shmuel@sdle.co.il 1

What is Ultra Fast Charging? Empty to Full in as little time as possible Re-charging a battery within 5 min (more than 10C Rate) Slow Charge Quick Charge Fast Charge Ultra Fast Charge <C/3 C/3<, <2C >2C >10C Fast Charging Slow Charging 2

What is a High Power Cell A cell capable of delivering most of its capacity at High rate (>10C) These cell has a large surface area between Anode and Cathode allowing them to decrease internal resistance and to deliver high power (Spiral Construction) Energy density is low relatively to high energy cells as the high power cell less active material Some of the high power cells has an advantage of capably to be charge fast 3

How To Define Ultra Fast Charging Lithium Cells Ultra High Power Lithium Cells Max constant discharge current >20C Power weight density at max constant discharge current >2000 W/kg Max pulse discharge current >40C Ultra Fast charging Max constant discharge current capacity/ 1C constant discharge current capacity >=10C >80% 4

What are the Options When Battery Run Time is Insufficient? Extra Batteries Battery Swap Fast Charging More battery weight and volume Powerful chargers or longer charge time to fill the batteries High costs due to extra batteries and more powerful chargers More batteries for swap stations Suitable only for standard size batteries Special and expensive swap machines Very high costs due to extra batteries and swap machines No extra batteries are needed!!! High Power chargers needed Complicated thermal battery management system for safety reasons More power from the grid Faster battery degradation High costs for special batteries and powerful chargers 5

Why are We Always Thinking Fully Charge Empty to Full in as little time as possible o We should remember that batteries are not often empty We rarely fully charge them!!! We also rarely need a full charge for our mission!!! Adaptive Charging Standard charge when possible and Fast or Ultra Fast only when it is necessary. Energy is like money we always want more even if we don t need it 6

Example of Battery Markets Served by 1. x-evs especially BEVs. 2. Electric bikes. 3. Smart grid energy storage. 4. High power tools. 5. Engine/generator starter. 6. Elevator energy recycle. Ultra Fast Charging

Why Can t We Ultra Fast Charge Standard Lithium Batteries? 1. Lithium Graphite Anode accepts the lithium ions at a slow rate although the Cathode can transfer them at a faster rate. 2. During ultra fast charging the cell faces deposition of lithium metal in the form of dendrites or as a high surface area film over the Anode. 3. Leads to very fast capacity degradation and increase of internal impedance. 4. Leads to safety problems like internal short circuit and explosion when the dendrites reach the cathode. Fast discharge is easy like going down stairs. Fast charge is difficult like climbing stairs. 8

What Happened When Ultra Fast Charging Imply to a Standard Battery Reduce End of charge energy Batteries Suffer from Slow Ion and electron transport Reduce charging efficiency Generate more heat during charge Charging Safety become a concern Generate Irreversible capacity lose Depredate Cycle and calendar life 9

Rechargeable Lithium Chemistries that can be Ultra Fast Charged 1. Lithium Titanate (LTO) fast Anode kinetics. Anode voltage is far from the voltage needed to deposit metallic lithium, thus smaller probability for metallic lithium deposition over the anode - Low energy density. 2. Lithium Iron Phosphate (LPF) Nano Materials lower cell voltage - Low energy density and faster self discharge. 3. Lithium Cobalt Oxide (LCO) only Saft cells are spirally designed to have a large Anode and Cathode surface area thus lowering internal impedance. 10

Lithium Titanate Battery Lithium Manganese Oxide Spinel Cathode - LMO Lithium Titanate Oxide Anode LTO Advantages Very Long Cycle Life High charge/discharge rates Very temperature tolerant High safety Public domain technology Disadvantages Low cell voltage 1.9-2.4v Lower energy than carbon anodes Higher cost per Kwh

Toshiba Lithium Titanate Rechargeable Battery - SCiB Recharges to 90% of full capacity in less than 5 minutes. Excellent safety because of high level anode stability. 6000 cycles of full D.O.D. to 90% of initial capacity. Low temperature discharge from -30C. Available on the Schwinn Tailwind E-Bike and EV projects with VW, Mitsubishi and Honda. 2.4Voc/ 4.2Ah 65 Wh/Kg 131 wh/l 650 W/Kg 1316 W/l VW & Toshiba

Toshiba Super Charge Lithium Ion Battery - SCiB http://www.toshiba.com/ind/data/tag_files/scib_brochure_5383.pdf

A123 LiFePO4 Rechargeable Batteries Cylindrical and soft package cells. High power density 3000 W/Kg (100C). 5-minute charge time possible on some models. Safer technology. 3.3V working voltage. Excellent cycle life - Thousands of cycles. 14

Saft Very High Power Cells Specially designed for high power. Can be charged in 4-10 min. http://www.saftbatteries.com/doc/documents/defence/cube769/vl12v_0510.c 49bfef4-fb6b-4469-a620-d3ca7f6e6c5c.pdf 15

From the Academy University of Illinois research group led by Prof Paul Braun has developed an innovative three - dimensional nanostructure cathode that enables faster charging and discharging without sacrificing energy storage capacity. http://braungroup.beckman.illinois.edu/paulbraun.html 16

Ultra Fast Charging Should Get More Attention Ultra Fast Charging enable smaller and lighter battery pack. There are very limited lithium ultra fast charging cell models on the market. Current cell models have a lower weight energy density - only 65-108 Wh/Kg in comparison to 130-170 Wh/Kg of standard high power cells. A new Nano-Materials, electrochemical couples and high surface area cells design should be develop for having a better charging rates. A small payment in Energy Density + Ultra fast Charging = EV Driving Range Solution 17

Thank You for Your Attention Shmuel De-Leon Energy, Ltd. Mazal Arie 10, Hod-Hasharon, Israel 45309 Tel/Fax: 972-77-5010792, Mobile: 972-52-8601517 www.sdle.co.il, www.batteriesdatabase.com shmuel@sdle.co.il Information on this presentation was obtained by: 1. Public web sources. 2. Shmuel De-Leon Battery/Energy Sources DataBase (Includes 30,000 cell PDF data sheets). 3. Shmuel De-Leon Batteries & Fuel Cells Seminar presentations. 18