Mini P2P IP camera IPC-2016W Features 1/4 CMOS,0.3 Mega pixel MJPEG Compression P2P mobile viewing One way audio Send pictures to FTP$E-mail when motion detect Support wireless connection:ieee802.11b/g/n Support AP mode connection, Mobile view the video and device Support NAS Network Storage recording video
Structure Specifications Model No. IPC-2016W Camera Audio Video Network Recording Alarm Sensor Lens IR cut Image IR Distance Minimum Illumination Audio Input Output Compression Maximum frame rate Image Wireless AP mode Network interface SD Card record NAS record Motion detect Alarm event Timing sending 1/4 CMOS 2.8MM No 0.3 Mega pixel No No Single way Insert MIC No MJPEG 30 fps 640x480 320 240 160x120 IEEE 802.11b/g/n Support Mobile view the video and device RJ-45 10M/100M adoptive Ethernet network port Support Support NAS storage records 1-5 Level sensitivity Send pictures to FTP$E-mail when alarm,and storage records on the computer By FTP/E-mail timing sending General Multi-level user Web Browser Admin/Operator/General users Support IE 6.0 or above, Google, Firefox Safari, Opera, etc
User access restriction Mobile view Adapter Power Operation temperature Humidity Pakcing dimension Gross Weight SD Card Certificates Warranty time 10 viewers@320x240 10 viewers@640x480 10 viewers@160x120 Support IOS,Android system 5V 1A 2.5W MAX -10 to +50 C (+14 to +122 F) 10~80%RH MAX to 32G TF Card CE; FCC; RoHS One year
P2P connection. After you connect the Cameras, Pls download the P2PLIVECAM at your iphone App Store. For the Android, pls download the P2PLIVECAM at Android applications of Baidu or scan the QR code to download the software Then open to add your camera.
There are automatically add and manually add for option Picture 1 for automatically add, picture2 for manually add.
Picture 1 Picture 2
Then input the P2p password for visiting.password:8888 Sae and connect it, then it will be ok for your mobile view
1. Install the camera searching tool,double click to open to find the LAN device 1.1 ( Noted: If the camera IP isn t consistent with your PC Subnet,Pls modify the ip address to make it into the same network segment with your PC.) 1.2 (after your amendment, click to research).
2. Double click the Current IP address to enter into the camera The factory default username & password: username: admin, password: 123456 2.1 (When you first time to use the camera, an Active X is required to install).
2.2 (make sure to close your browser to install the Active X) 2.3 Then you can open the browser to enter into the camera
3 Select the browser style to enter into the camera
The menu for camera operating is on the right. One Screen view Four Screen view Nine Screen view camera settings The camera parameters display. position set,picture mirror and flip, Brightness and contrast. Microphone speaker, snapshot, video record.preset 4.Camera settings Click the symbol to enter into the settings. 4.1 System 4.1.1 About shows some basic information of this camera such as Device SN Hardware Version and Firmware Version.
4.1.2 backup and restore 4.1.3 NTP Setting Make the setting for the camera clock and time.
4.1.5 Misc Setting Control settings for the camera Power LED and power line frequency. 4.1.6 System Log You can visit the daily schedule here.
4.1.7 language You can choose the camera language and style here. 4.1.8 change password You can modify the password for the administrator here.
4.1.9 system user You can add visitors and set authority. 4.2.0 update For the camera firmware updating.
4.2.1 Reboot Camera restart operation. 5. Network 5.1 Ip config You can make some basic network setting for the camera.
5.2 Wi-fi Shows the wifi status and connection. 5.3 AP Mode setting
5.4 DDNS Shows the camera DDNS name and status. 5.3 P2P Setting You can view the P2p connection status, and make the p2p password settings.
6. Alarm setting 6.1 Alarm setting Make the motion detection here. 6.2 Email setting For email alert settings.
6.3 FTP alarm FTP alarm settings. 6.4 Recording Storage path fpr the camera snapshot and record.