Efficient Lighting Systems LED DOWNLIGHTS MINI LED DOWNLIGHTS & HIGH OUT-PUT LED DOWNLIGHTS

Efficient Lighting Systems LED DOWNLIGHTS MINI LED DOWNLIGHTS & HIGH OUT-PUT LED DOWNLIGHTS

2 CONTENTS MINI DOWNLIGHTS ADL90 ADL110 ADL125 ADLS100 P4 P5 P5 P5 P6 9000 P6 9525B HIGH OUT PUT DOWNLIGHTS ADL150 LED ADL150 WIDE BEAM LED ADLW150 WALL WASH ADLS130 LED TECHNICAL DATA TECHNICAL DATA P6 P7 P8 P8 P9 P9 P10 P11 Efficient Lighting Systems An Australian owned company supplying Australian designed, made/assembled products.

Efficient Lighting Systems Pty. Ltd. WITH OVER 20 YEARS OF EXPERIENCE IN MANUFACTURING LIGHT FITTINGS, ELS KNOWS WHAT IS REQUIRED TO MAKE QUALITY PRODUCTS 3 Good design Australian designed for Australian conditions is where it all starts, and where extensive experience is a must. We know what works, and just as importantly, we know what will not work. Quality components only top quality components are used. World recognized quality component supplies are chosen for their quality, not price. With so many unknown new comers in LED lighting you will find comfort in the fact that the manufacturers of our LED s and drivers are well recognized for top quality. Independent photometric test reports There is no need to print brochures with green trees to suggest energy efficiency. All our products are supported by independent photometric test reports. IES files are available from the web site and full copies of test reports are available if required. No trees just the facts. EMC compliance All products are tested for compliance to AS/NZS CISPR15 Australian assembly and testing The ultimate final assurance of quality as all fittings are assembled, electrically tested, and packaged in our Melbourne based facility. You re welcome to visit anytime to view this process.

4 GENERATION 2 MINI LED DOWNLIGHTS MORE LIGHT, LESS POWER & VERY ECONOMICAL The new generation 2 Mini LED Downlights provide up to 40% more light, use less power and are far more economical than generation 1 Australian designed & assembled The ELS ADL range of down lights utilize CreeXP-G LED s. Cree has long been recognized as a leader in LED technology and quality. The ELS LED MCPCB s are Australian designed and made to ensure top quality. Quality lighting without glare for visual comfort. A common fault with many LED light fittings is glare. The very nature of all LED s being a very small, high intensity light source means they are a source of glare and require luminaires to be designed to minimise glare a major cause of visual discomfort. All the ELS ADL down lights use reflector systems or baffles to provide a shielding angle. When viewed from normal viewing angles the actual LED s are not visible. Typical uses Primarily this range is designed to be used in areas that traditionally would have used low voltage 20w, 35w, and 50w lamps or low wattage fluorescent lamps of 13w, 18w or 26w down lights. When compared to similar output low voltage lamps energy savings of approximately 50% can be expected. SHIELDING ANGLE Specifications & operating environment Thermal management The ADL LED range are fitted with purpose designed heat sinks to ensure the operating temperature is within the designed parameter of the LED unit. Maximum Ta temperature (ambient temperature) should not exceed 35 C. Ta temperatures in excess of 35 will have a detrimental effect on the life of the LED unit. Lumen maintenance When used within the specification Ta 35 C, lumen maintenance of 50% at 50,000 hours is expected. Testing & certification All ELS Mini LED down lights have NATA certified photometric data and EMC approval. Full copies of photometric test reports are available on request. IES files are available to download from our website. Visit www.elslighting.com.au for more information. CRI The entire mini downlight range has a CRI 80+ Dimming All fittings are supplied with trailing edge dimmable gear (dimmable to 20% of max) DALI dimmable fittings also available as a special order.

5 ADL90 LED 83 Aluminium reflector low glare White polycarbonate trim 95 90 Non Dimmable & Trailing Edge Dimmable DALI, DSI & Switch Dimmable Colour Temp. Beam Angle Lumens System ADL90.40.2.30.63 ADL90.40.2.30.66 3000K 40 490 11.1 ADL90.48.2.40.63 ADL90.48.2.40.66 0K 48 592 10.6 ADL110 LED Aluminium reflector low glare White polycarbonate trim 50 135 70 112 102 112 Non Dimmable & Trailing Edge Dimmable DALI, DSI & Switch Dimmable Colour Temp. Beam Angle Lumens System ADL110.54.2.30.63 ADL110.54.2.30.66 3000K 54 642 14.8 ADL110.70.2.30.63 ADL110.70.2.30.66 3000K 70 667 14.7 ADL110.50.2.40.63 ADL110.50.2.40.66 0K 50 775 14.3 ADL110.70.2.40.63 ADL110.70.2.40.66 0K 70 814 14.5 ADL125 LED Aluminium reflector low glare White polycarbonate trim 60 140 75 116 116 126 Non Dimmable & Trailing Edge Dimmable DALI, DSI & Switch Dimmable Colour Temp. Beam Angle Lumens System ADL125.60.2.30.63 ADL125.60.2.30.66 3000K 60 930 20.9 ADL125.75.2.30.63 ADL125.75.2.30.66 3000K 75 989 21.1 ADL125.60.2.40.63 ADL125.60.2.40.66 0K 60 1144 20.4 ADL125.75.2.40.63 ADL125.75.2.40.66 0K 75 1166 20.0

6 9525B LED Black baffle low glare with 25 shielding angle White painted trim Tilt adjustable to 20 82 80 95 Non Dimmable & Trailing Edge Dimmable DALI, DSI & Switch Dimmable Colour Temp. Beam Angle Lumens System 9525B.44.2.30.63 9525B.44.2.30.66 3000K 44 455 10.7 9525B.55.2.30.63 9525B.55.2.30.66 3000K 55 428 10.6 9525B.44.2.40.63 9525B.44.2.40.66 0K 44 585 10.9 9525B.50.2.40.63 9525B.50.2.40.66 0K 50 563 11.3 9000 LED Black internal with 25 shielding angle White or silver painted trim Tilt adjustable to 20 88 92 100 Non Dimmable & Trailing Edge Dimmable DALI, DSI & Switch Dimmable Colour Temp. Beam Angle Lumens System 9000.44.2.30.63 9000.44.2.30.66 3000K 44 455 10.7 9000.55.2.30.63 9000.55.2.30.66 3000K 55 428 10.6 9000.44.2.40.63 9000.44.2.40.66 0K 44 585 10.9 9000.50.2.40.63 9000.50.2.40.66 0K 50 563 11.3 ADLS100 LED 95 Aluminium reflector low glare White painted trim 112 Non Dimmable & Trailing Edge Dimmable DALI, DSI & Switch Dimmable Colour Temp. Beam Angle Lumens System ADLS100.70.2.30.63 ADLS100.70.2.30.66 3000K 70 672 14.6 ADLS100.70.2.40.63 ADLS100.70.2.40.66 0K 70 801 14.5 110

GENERATION 3 HIGH OUT-PUT LED DOWNLIGHTS LESS WATTS, INCREASED EFFICIENCY & MORE ECONOMICAL THAN PREVIOUS MODELS AUSTRALIAN DESIGNED AND ASSEMBLED 7 The new generation 3 High Out-Put LED Downlights use less watts, have increased efficiency and are more economical than previous models An efficient lighting system The ADL150 & ADLS 130 LED downlight range utilises Philips LED s and Philips matched driver. This package offers a breakthrough in energy efficiency and high lumen packages and when combined with the specifically designed reflector it provides specifiers with an even more energy efficient alternative to compact fluorescent downlights. The high lumen packages that are offered across the entire High Out- Put LED range make these fittings perfect for many commercial and soft commercial applications. Quality lighting without glare for visual comfort. A common fault with many LED light fittings is glare. The very nature of all LED s being a very small, high intensity light source, means they are a source of glare and require luminaires to be designed to minimise glare a major cause of visual discomfort. The ADL150 and ADLS130 LED down lights use reflector systems to provide a shielding angle. When viewed from normal viewing angles the actual LED s are not visible. Specifications and operating environment The ADL150 and ADLS130 LED downlights are fitted with a purpose designed heat sink to ensure the operating temperature is within the parameter of the LED unit. Maximum Ta. temperature (ambient temperature) should not exceed 35 C. Ta temperatures in excess of 35 C will have a detrimental effect on the LED unit. The life of the LED unit can be further extended by using the optional 150.12.008 fanless forced air cooler. All 3000lm fittings are supplied standard with the fanless forced air cooler. CRI The entire ADL downlight range has a CRI 80+. SHIELDING ANGLE Dimming All fittings are supplied with trailing edge dimmable gear (dimmable to 20% of max) DALI dimmable fittings also available as a special order. Lumen maintenance When used within the specification Ta max 35 C, lumen maintenance of 70% at 35,000 hours is expected. At 50,000 hours lumen maintenance is 50% (average lifetime specification). Luminous flux during start period In contrast to other light sources LED s can be on at full power (or in the case of the dimming version at any dimmed level) instantaneously. All ADL150 High Out-Put LED downlights require an initial burn in period of 100 hours to reach the specifications listed. Testing & certification All ELS ADL LED down lights have NATA certified photometric data and EMC approval. Full copies of photometric test reports are available on request. IES files are available to download from our website. Visit www.elslighting.com.au for more information.

8 ADL150 LED 140 Aluminium reflector with 45 shielding angle for superior visual comfort White polycarbonate trim 180 HEAT SINK LED 150 Electronic Non Dimmable DALI Dimmable Colour Temp. Beam Angle Lumens System ADL150.1100.63.0 ADL150.1100.66.0 0K 60 882 13.8 ADL150.2000.63.0 ADL150.2000.66.0 0K 60 1489 27.6 ADL150.3000.63.0 ADL150.3000.66.0 0K 60 2232 48 ADL150.1100.63.3000 ADL150.1100.66.3000 3000K 60 882 15.5 ADL150.2000.63.3000 ADL150.2000.66.3000 3000K 60 1489 29.6 ADL150.3000.63.3000 ADL150.3000.66.3000 3000K 60 2232 52 ADL150 WIDE BEAM LED Aluminium reflector White polycarbonate trim 140 140 HEAT SINK LED 150 Electronic Non Dimmable DALI Dimmable Colour Temp. Beam Angle Lumens System ADL150.1100.90.40.63 ADL150.1100.90.40.66 0K 90 972 13.8 ADL150.2000.90.40.63 ADL150.2000.90.40.66 0K 90 1877 27.6 ADL150.3000.90.40.63 ADL150.3000.90.40.66 0K 90 2486 48 ADL150.1100.90.30.63 ADL150.1100.90.30.66 3000K 90 972 15.5 ADL150.2000.90.30.63 ADL150.2000.90.30.66 3000K 90 1877 29.6 ADL150.3000.90.30.63 ADL150.3000.90.30.66 3000K 90 2486 52 OPTIONAL ACCESSORIES 150.VR - 4.00mm vandal resistant polycarbonate lens with white aluminium trim 150.901 - IP44 clear glass lens with white aluminium trim

9 ADLW150 LED WALL WASH 140 Aluminium wash light reflector White polycarbonate trim 180 HEAT SINK LED 150 Electronic Non Dimmable DALI Dimmable Colour Temp. Lumens System ADLW150.1100.63.0 ADLW150.1100.66.0 0K 914 13.8 ADLW150.2000.63.0 ADLW150.2000.66.0 0K 1662 27.6 ADLW150.3000.63.0 ADLW150.3000.66.0 0K 2493 48 ADLW150.1100.63.3000 ADLW150.1100.66.3000 3000K 914 15.5 ADLW150.2000.63.3000 ADLW150.2000.66.3000 3000K 1662 29.6 ADLW150.3000.63.3000 ADLW150.3000.66.3000 3000K 2493 52 ADLS 130 LED Aluminium reflector White painted trim 155 110 HEAT SINK LED 130 Electronic Non Dimmable DALI Dimmable Colour Temp. Beam Angle Lumens System ADLS130.1100.63.0 ADLS130.1100.66.0 0K 85 763 13.8 ADLS130.2000.63.0 ADLS130.2000.66.0 0K 85 1388 27.6 ADLS130.1100.63.3000 ADLS130.1100.66.3000 3000K 85 763 15.5 ADLS130.2000.63.3000 ADLS130.2000.66.3000 3000K 85 1388 29.6

10 TECHNICAL DATA All polar curves listed are absolute. For up to date photometric data visit www.elslighting.com.au 300 300 800 800 900 900 ADL90.40.2.30.63 ADL90.48.2.40.63 ADL110.50.2.40.63 ADL110.54.2.30.63 200 250 500 800 800 750 ADL110.70.2.30.63 ADL110.70.2.40.63 ADL125.60.2.30.63 ADL125.60.2.40.63 250 300 200 200 500 750 900 ADL125.75.2.30.63 ADL125.75.2.40.63 ADLS100.70.2.30.63 ADLS100.70.2.40.63

11 250 200 300 500 800 750 900 9525B.44.2.30.63 9525B.44.2.40.63 9525B.55.2.30.63 9525B.50.2.40.63 300 1000 500 2000 1000 900 1800 3000 1500 ADL150.1100.63.3000 ADL150.2000.63.3000 ADL150.3000.63.0 ADLW150.2000.63.0 300 200 800 900 ADLS130.2000.63.0 ADL150.1100.90.40.63 ADL150.3000.90.40.63

Efficient Lighting Systems has distributors in each capital city in Australia and New Zealand. To find your local distributor visit www.elslighting.com.au This catalogue is printed on 100% recycled paper EFFICIENT LIGHTING SYSTEMS 39 TINNING ST BRUNSWICK VIC 3056 PO BOX 5084 MORELAND WEST VIC 3055 PHONE: 03 9222 5522 FAX: 03 9222 5521 EMAIL: info@elslighting.com.au www.elslighting.com.au