Mercury Marine Precision Oils and Lubricants

Mercury Marine Precision Oils and Lubricants

Introducing Mercury Precision Oils and Lubricants - Total protection for your engine from the inside. Boating is not often thought of as a harsh environment. Just stop and think about it. Marine engines can and are often used for extended periods at wide-open throttle (up to 6400rpm on some models) in harsh saltwater and full UV sunlight environments. Then sit in storage over the off-season, in some cases without any use. With that in mind, all Mercury Oils and Lubricants are specifically engineered for the unique needs of marine engines and rigorously tested to meet our high standards. So you can get the most out of your engine, while having total peace of mind that your engine is being protected. Exactly what you should expect from the only marine engine manufacturer 100% focused on the marine industry, for over 70 continuous years.

Mercury Premium 2-Cycle Outboard Oil Mercury Certified TC-W3 is designed to meet the unique requirements of 2-cycle marine engines, formulated and designed to help prevent corrosion on internal components, maintain peak engine performance and extend engine life. The special Mercury formula meets the requirements of all leading manufacturers of outboards, personal watercrafts, even motorcycles and other 2-Cycle air or water applications allowing for it to be used in a wide variety of non-marine uses when mixed at manufacturers recommended ratios. 1 Litre 92-858021K01 4 Litre 92-858022K01

Mercury Premium Plus 2-cycle Outboard Oil Mercury Premium Plus Outboard Oil goes beyond the basic requirements of any 2-cycle marine engine to provide superior protection for mid to high horsepower engines. Continued use provides outstanding wear and corrosion protection, minimises build-up of performance-robbing carbon deposits and maintains peak engine performance and reliability; helping to extend the life of your engine. The unique Mercury formula exceeds the TC-W3 standards and those of all leading manufacturers of outboards, personal watercrafts, even motorcycles and other 2-cycle air or water applications; allowing for it to be used in a wide variety of non-marine engines when mixed at manufacturers recommended ratios. 1 Litre 92-858026K01 4 Litre 92-858027K01 10 Litre 92-858028K01

Mercury OptiMax/DFI Outboard Engine Oil This new synthetic blend oil was developed specifically for the greater demands of DFI outboard engines and provides the maximum protection for OptiMax and DFI engines even under the most extreme operating conditions. This exclusive new formula provides increased lubrication while minimising carbon deposits, helps reduce smoke and provides the highest protection for the engine. It is not intended for use in engines specifying a TC-W3 oil. 4 Litre 92-858037K01 10 Litre 92-858038K01

Mercury 4-Stroke Engine Oil Mercury 4-Stroke oil has been specifically formulated and developed to meet the needs of all 4-Stroke outboard engines. A premium grade base stock and special additives make this a superior grade of 4-Stroke outboard oil that can stand up to the rigors of the marine environment. It keeps your engine running at peak performance whilst providing superior lubrication, outstanding wear and corrosion protection, 1 Litre 92-858045K01 4 Litre 92-858046K01

Mercury Synthetic 4-Stroke Engine Oil This Synthetic range of 25W-40 oil was formulated specifically for 4-Stroke outboards by Mercury, the Marine Technology and Performance leader. Qualified through extensive testing by Mercury Marine Engineering to provide superior long-term marine four-stroke engine reliability. This synthetic blend of premium grade base stocks contains specifically designed additives for optimum marine performance that regular automotive oils do not require. It provides superior moisture and rust free protection, improved performance and protects against wear, for trouble free operation. 1 Litre 92-858052K01 4 Litre 92-858053K01

Mercury Verado Outboard Oil Mercury Verado outboard oil has been specifically formulated for the increased demands of Verado SuperCharged outboards. A technology specific 25W-50 marine oil, it is formulated for the world s first and only supercharged and intercooled outboard engine. The unmatched torque and acceleration of this engine requires maximum protection, found only in this well-balanced combination of today s highest quality synthetic base stock, plus an advanced additive system that meets the stringent marine operational requirements of all 4 and 6 cylinder Verado models. 1 Litre 92-8M0053665 4 Litre 92-858084K01

Mercury Sterndrive & Inboard 4-Cycle Engine Oil Specifically formulated and developed to meet the needs of high-output sterndrive and inboard engines. This premium multi-viscosity oil is formulated to eliminate thermal breakdown (no viscosity improvers necessary) under extreme temperatures and loads. It has been field-tested and proven in petrol and diesel applications. It provides superior lubrication and protection of internal components from corrosion, wear, scuffing and scoring even in higher temperature engines. Not suitable for catalyzed engines. 1 Litre 92-858048K01 4 Litre 92-858049K01

Mercury MerCruiser Full Synthetic Engine Oil Marine engines are subjected to much higher loads and running stresses than automotive engines. Marine engines continually work at higher rpm levels compared to passenger cars so your choice of marine grade oil has to be able to take the heat as well as deal with the low temperatures of the water that cools your engine. This full Synthetic 20W-40 engine oil was formulated to provide optimum operation and longer life for all Mercury MerCruiser petrol engines and for the critical engine catalyst systems offered today. The benefit of using this oil in MerCruiser Catalyst models is an extended catalytic converter life due to a low phosphorus formulation. This distinct synthetic blend of premium grade base stocks contains specifically designed additives for optimum marine performance that regular automotive oils do not require. It provides superior wear protection and lubrication protection, extreme salt and freshwater rust protection and its more stable, high viscosity oil that prevents dirt and soot from settling on metal surfaces. Must be used in catalyzed engines 1 Litre 92-858087K01 4 Litre 92-858088K01

Mercury Heavy Duty Diesel Engine Oil Heavy Duty Diesel Engine Oil has been formulated to meet heavy-duty diesel requirements while combating sludge and varnish formation. This oil contains a higher additive level than standard fleet oils and provides greater protection under the most severe operating conditions, extended service, or poor fuel quality. This shear stable multigrade formula provides excellent water tolerance in addition to controlling deposits. 4 Litre 92-858042K01

Mercury Premium Gear Lube Specifically designed and tested for marine applications, Mercury Premium Gear Lube has been engineered to provide excellent lubrication and wear resistance to lower unit gears in all outboards*. Specialised molecules improve adhesion, protecting gears from metal-to-metal contact. Mercury Premium Gear Lube is recommended in lower units for outboards below 75hp. Do not mix with High Performance Gear Lube. *Not intended for use in OMC electric shift gear cases. 1 Litre 92-858058K01 10 Litre 92-858059K01

Mercury High Performance Gear Lube Want superior protection for your engine? Mercury s High Performance Gear Lube provides the best protection possible for you sterndrive or outboard*. The exclusive formulation provides extended gear life in the most extreme conditions including high speed and high horsepower applications. Extensive testing has shown proven protection against corrosion and excessive wear. Extreme pressure synthetic additives protect gears from metal-to-metal contact. The specialised marine formulation also helps protect against failure due to water in the gear housing. Mercury High Performance Gear Lube is recommended in lower units for outboards above 75hp and all sterndrives. Do not mix with Premium Gear Lube. *Not intended for use in OMC electric shift gear cases. 1 Litre 92-858064K01 10 Litre 92-858065K01

Mercury Precision Lubricants Specifically formulated to endure some of the toughest and harshest environments on earth, Mercury Lubricants ensure the highest level of protection available for your marine motor. Unlike automotive lubricants, all Mercury branded lubricants are specifically formulated for the unique needs of Mercury engines and are rigorously tested to meet our own high standards. It also means they meet the requirements of all other leading manufacturers of marine engines, because Mercury is the industry standard. Protecting your investment and warranty is easy; insist on Genuine Mercury Oils and Lubricants.

FUEL TREATMENT Protect your engine against modern fuel both petrol and diesel Modern boat owners need to be extra vigilant to protect their engines and entire fuel systems from the damage and contamination that often occurs during storage. This can be a major issue for thousands of recreational boat owners who regularly take breaks from the water. Poorly maintained fuel systems can adversely affect engine reliability which is why Mercury Marine developed its Fuel System Treatment & Stabilizer to protect boat and engine fuel systems for extended periods of time. Quickare is a fuel treatment that can be used at every fill up to maximize engine performance with all grades of petrol. It keeps fuel fresh between fill ups, up to 3 months, and helps control corrosion, gum and varnish build-up and phase separation associated with ethanol blend fuel. Quickleen engine & fuel cleaner should be used throughout the boating season to quickly and thoroughly remove carbon deposits from carburettors and injectors, intake valves, spark plugs, piston crowns and cylinder heads. Quickstor is twice as strong and should be added to the fuel before long-term boat storage to prevent regular and ethanol blended fuel from breaking down and oxidizing. Stabilize fuel for up to a year. Unlike the competition, Mercury s stabilizer has been specifically designed for use in all 2 or 4-Stroke petrol and diesel engines. By preventing the formation of impurities in dormant fuel systems, Mercury s Fuel System Treatment & Stabilizer protects engines, fuel tanks and fuel lines against chemical damage, deposits and clogs which could cost thousands of dollars. For the most effective results, Mercury s Fuel System Treatment & Stabilizer should be added to your fuel tank before filling with fuel.

Mercury Marine A.B.N 25 003 100 007 Phone 1800 818 000 (Australia) Phone: 0800 688 262 (New Zealand) www.mercurymarine.com.au www.mercurymarine.co.nz All data is correct at the time of printing, however Mercury Marine reserves the right to change prices and specifications without notice. All products available at time of publication. 93-8M8000189