GROUP NC STORAGE AND TRANSPORT SYSTEMS PRODUCT RANGE ORGANISATION IS POWER CONTACT US: 000 00 www.polstore.co.uk FOLLOW US: /polstoreuk
Series 30 27x27 Eh Tool trolleys see page 72 NC storage and transport systems NC roller shutter cabinets see page 0 NC universal racks see page Leafdoor cabinets for tools see page 90 RAL 502 RAL 0 RAL 7035 5year Guarantee For your safety all cabinets must be anchored using floor bolts Fixing material for cabinets 000030 For your safety all shelving systems must be secured to the floor or wall Fixing material for shelving 00004 70
7
Series 30 27x27 Eh Tool trolleys Adjustable shelves Made of highquality steel with rubber mat To be fixed between the perforated sides of the trolley. Usable Usable width depth capacity kg 00 305 30 50 300407 00 45 30 50 3004 Shelf colour: Light grey RAL 7035 / Rubber mat: Black Made of highquality sheet steel. Trolleys are painted with high resistance products, environmentally friendly. The sides are slotted in increments of 25 to allow tool holder frames, tool cradles and other components to be adjusted accordingly. Fitted with handle and pair of rubber castors, Ø 50. Width Depth capacity kg * 75 50 0 500 30000 * with load evenly distributed Colours: see colour chart at the bottom of the page 2 fixed and 2 swivel braked rubber castors Fixed shelf Made of highquality steel with rubber mat To be fixed to the external perforated side of the trolley Usable Usable width depth capacity kg 49 30 20 300207 Shelf colour: Light grey RAL 7035 / Rubber mat: Black Protection bars Made of highquality steel.to be fixed between perforated sides of the trolley. Fixing hardware included. Used to store documents, can be fitted to both perforated sides. Document pocket Made of highquality steel Width 00 270 Pair 30042 Width Depth 370 4 Size DIN 0 A4 3004 72 RAL 502 RAL 0 RAL 7035 i capacity is intended for evenly distributed loads
A B Tool cradles Made of highquality steel Fixed tool holder frame Made of highquality steel To store tool holders. 2types available (with handle and without handle), fitted to the perforated sides of the trolley using cradle supports. To be fixed to the perforated sides of the trolley (supports included) Fixing hardware included. A Tool cradle Width 52 35 52 95 without with Depth Handles Handles 55 30430 3043 55 304 30433 Fixed tool holder frame Width Depth 54 447 No. of rows 0 3 304533 Made of steel. Fitted to the perforated sides of the trolley. B Cradle support, pair Horizontal Angled, 20 30440 3044 Tool holders see page 75 73
Series 30 27x27 Eh Size: 077x50x0 Size: 077x50x0 without Tool holders 300000 without Tool holders 3000020 with Tool holders ISOSK30 300003 with Tool holders ISOSK30 3000023 with Tool holders ISOSK40 300004 with Tool holders ISOSK40 30000 with 20 Tool holders ISOSK50 300005 with 5 Tool holders ISOSK50 3000025 with Tool holders VDI 40 30000 with Tool holders VDI 40 300002 with Tool holders HSK 50 300007 with Tool holders HSK 50 3000027 with Tool holders HSK 3 30000 with Tool holders HSK 3 300002 Fixed shelf with rubber mat 4 Tool cradles and 4 angled supports Fixed shelf with rubber mat 3 Tool cradles and 3 horizontal supports Adjustable shelf with rubber mat Size: 077x50x0 Size: 077x50x0 without Tool holders 3000050 without Tool holders 300000 with Tool holders ISOSK30 3000053 with Tool holders ISOSK30 300003 with Tool holders ISOSK40 3000054 with Tool holders ISOSK40 300004 with 5 Tool holders ISOSK50 3000055 with 20 Tool holders ISOSK50 300005 with Tool holders VDI 40 300005 with Tool holders VDI 40 30000 with Tool holders HSK 50 3000057 with Tool holders HSK 50 300007 with Tool holders HSK 3 300005 with Tool holders HSK 3 30000 Fixed shelf with rubber mat Fixed tool holder frame 3rows Fixed shelf with rubber mat Fixed tool holder frame 3rows Tool cradle and angled support 74 RAL 502 RAL 0 RAL 7035
Standard examples: Size: 077x50x0 Size: 077x50x0 without Tool holders 3000070 without Tool holders 300000 with 40 Tool holders ISOSK30 3000073 with 5 Tool holders ISOSK30 300003 with 40 Tool holders ISOSK40 3000074 with 5 Tool holders ISOSK40 300004 with 25 Tool holders ISOSK50 3000075 with 35 Tool holders ISOSK50 300005 with 30 Tool holders VDI 40 300007 with 42 Tool holders VDI 40 30000 with 40 Tool holders HSK 50 3000077 with 5 Tool holders HSK 50 300007 with 30 Tool holders HSK 3 300007 with 42 Tool holders HSK 3 30000 Fixed shelf with rubber mat Fixed tool holder frame 3rows 2 Tool cradles and 2 angled supports Fixed shelf with rubber mat Fixed tool holder frame 3rows 4 Tool cradles and 4 angled supports Tool type ISOSK 25 ISOSK 30 ISOSK 40 ISOSK 45 ISOSK 50 HSK HSK 40 HSK 50 HSK 3 HSK 0 RED Art. Nr.. 305025 305030 305040 305045 305050 3054 305440 305450 30543 30540 HSK 00 305499 CAPTO C3 30503 CAPTO C4 30504 CAPTO C5 30505 CAPTO C 3050 CAPTO C 3050 VDI 20 30520 VDI 30 30530 VDI 40 30540 VDI 50 30550 VDI 0 3050 5 5 75 7 305005 305005 3050075 305007 05 305005 20 305020 No. of tools per tool holder 4 4 No. of tools per cradle 30430 5 5 5 4 7 5 7 5 4 No. of tools per frame 304533 5 5 5 2 2 5 2 5 2 75
Series 30 Tool trolleys Made of highquality sheet steel. Trolley sides and bases are welded and painted with high resistance products, environmentally friendly. The sides are slotted in increments of 25 to allow tool holder frames, tool cradles and other components to be adjusted accordingly. Fitted with handle and pair of rubber castors, Ø 200. Width Depth capacity kg * 00 92 970 00 300400 * with load evenly distributed Colours: see colour chart at the bottom of the page Adjustable shelves Made of highquality steel with rubber mat To be fixed between the perforated sides of the trolley. Usable Usable width depth capacity kg 00 305 30 50 300407 00 45 30 50 3004 00 5 30 50 30045 Shelf colour: Light grey RAL 7035 / Rubber mat: Black 2 fixed and 2 swivel braked rubber castors Protection bars Document pocket Made of highquality steel Used to store documents, can be fitted to both perforated sides. Made of highquality steel.to be fixed between perforated sides of the trolley. Fixing hardware included. Width Depth 370 4 Size DIN 0 A4 3004 Width 00 270 Pair 30042 7 RAL 502 RAL 0 RAL 7035 i capacity is intended for evenly distributed loads
A C Tool cradles Made of highquality steel Fixed tool holder frame Made of highquality steel B D To store tool holders. 2types available (with handle and without handle), fitted to the perforated sides of the trolley using cradle supports. To be fixed to the perforated sides of the trolley. Fixing hardware included. A Tool cradle Width 52 35 52 95 without with Depth Handles Handles 55 30430 3043 55 304 30433 C Fixed tool holder frame Width Depth 54 59 No. of rows 0 4 304343 Made of steel. Fitted to the perforated sides of the trolley. Made of steel. Fitted to the perforated sides of the trolley. B Cradle support, pair D Frame support, pair Horizontal Angled, 20 30440 3044 300422 00 Vertical tool storage supports Made of highquality steel Tool Tool Collar type type Ø max. Depth No. of ISOSK HSK tools 30 50 5/3 5 33743 40 3 3/50 5 9 3374409 45 0 2/3 72 7 3374457 50 00 9/0 4 5 3374505 50 2/0 00 5 337455 Tool holders see page 79 77
Series 30 Standard examples: Size: 00x92x970 Size: 00x92x970 without Tool holders 30040020 without Tool holders 30040030 with 4 Tool holders ISOSK30 30040023 with 72 Tool holders ISOSK30 30040033 with 4 Tool holders ISOSK40 300400 with 72 Tool holders ISOSK40 30040034 with 30 Tool holders ISOSK50 30040025 with 45 Tool holders ISOSK50 30040035 with 3 Tool holders VDI 40 3004002 with 54 Tool holders VDI 40 3004003 with 4 Tool holders HSK 50 30040027 with 72 Tool holders HSK 50 30040037 with 3 Tool holders HSK 3 3004002 with 54 Tool holders HSK 3 3004003 2 Adjustable shelves with rubber mat Fixed tool holder frame 4rows 2 Tool cradles and 2 angled supports Adjustable shelf with rubber mat Fixed tool holder frame 4rows 5 Tool cradles and 5 angled supports Size: 00x92x970 without Tool holders 30040040 with 0 Tool holders ISOSK30 30040043 with 0 Tool holders ISOSK40 30040044 with 50 Tool holders ISOSK50 30040045 with 0 Tool holders VDI 40 3004004 with 0 Tool holders HSK 50 30040047 with 0 Tool holders HSK 3 3004004 Fixed tool holder frame 4rows 4 Tool cradles and 4 angled supports 2 Tool cradles and 2 horizontal supports Size: 00x92x970 without Tool holders 30040050 with 0 Tool holders ISOSK30 30040053 with 0 Tool holders ISOSK40 30040054 with 50 Tool holders ISOSK50 30040055 with 0 Tool holders VDI 40 3004005 with 0 Tool holders HSK 50 30040057 with 0 Tool holders HSK 3 3004005 Adjustable shelf with rubber mat Fixed tool holder frame 4rows Tool cradles and angled supports 7 RAL 502 RAL 0 RAL 7035
Tool holders Tool type ISOSK 25 ISOSK 30 ISOSK 40 ISOSK 45 ISOSK 50 HSK HSK 40 HSK 50 HSK 3 HSK 0 RED Art. Nr.. 305025 305030 305040 305045 305050 3054 305440 305450 30543 30540 HSK 00 305499 CAPTO C3 30503 CAPTO C4 30504 CAPTO C5 30505 CAPTO C 3050 CAPTO C 3050 VDI 20 30520 VDI 30 30530 VDI 40 30540 VDI 50 30550 VDI 0 3050 5 5 75 7 305005 305005 3050075 305007 05 305005 20 305020 No. of tools per tool holder 4 4 No. of tools per cradle 30430 5 5 5 4 7 5 7 5 4 No. of tools per frame 304343 20 20 20 2 20 2 20 79
Series 30 NC roller shutter cabinets 2 3 Cabinet bases Made of highquality steel 2 3 Pallet base Cover plate Colour: Black Width Depth 023 52 00 05230 023 00 053540 Made of highquality sheet steel, painted with high resistance products, environmentally friendly. Both internal side panels are perforated to allow secure fitting of accessories to suit exact requirements. Robust metal housing and plastic horizontal profiles with hand grip for easy operation fitted with safety cylinder lock and 2 keys. Usable Width Depth height 040 35 450 30 303945 040 35 2000 0 3039200 Single drawer opening system not included Colours: see colour chart at the bottom of the page Usable Usable width depth 93 590 Adjustable shelf Made of highquality steel capacity kg 35 200 30302 A Fixed tool holder frame Made of highquality steel Single drawer opening devices B To be fixed to the perforated sides of the cabinet using frame supports. Device required to open one drawer at a time. To be fitted onto perforated sides of the cabinet. A Fixed tool holder frame Width Depth 90 59 No. of rows 0 4 3043454 000 450 25 303930 303934 30393 B Frame support, pair Angled, 20 303072 0 RAL 502 RAL 0 RAL 7035 i capacity is intended for evenly distributed loads
A C B To store tool holders. Available without handle only, fitted to the perforated sides of the cabinets using cradle supports. A Tool cradle Width 94 35 Made of steel. Fitted to the perforated sides of the cabinet. B Cradle support, pair Tool cradles Made of highquality steel Depth 55 304540 D C Tool holder frame Width Depth 90 447 D Frame support, pair For taper length 00 355 5220 95225 Drawer Eh No. of rows 54x27 3 3043354 Depth 27 Eh 304330 304337 Tool holder frame for drawers Made of highquality steel Horizontal Angled, 20 30440 3044 T Drawers T Retractable shelf 53 9 Eh 53 9 Eh 459 = 27 Eh 9 = 54 Eh Made of highquality sheet steel. Available in total extension only with steel roller bearings. Fitted with galvanised steel inserts ensuring a level surface. All retractable shelf handles are equipped with aluminium profiles, end caps and labelling strips. Usable Usable width depth Extension capacity % kg * 9 459 75 00 200 30395 * with load evenly distributed Card insert and cellophane (spare part) For drawers: 54 Eh 000545 Kit: 30 pieces Made of highquality sheet steel. Available in total extension only with steel roller bearings. All 4 drawer walls are slotted, for custom subdivision using partitioning material. All drawer handles are equipped with aluminium profiles, end caps and labelling strips. Front Usable Lateral height height height capacity kg * 75 T 54 52 200 30307 00 T 79 77 200 3030 50 T 29 27 200 3035 T = total extension: 00% extension * with load evenly distributed and at least one slotted divider in the middle Card insert and cellophane (spare part) For drawers: 54 Eh 000545 Kit: 30 pieces Tool holders see page 5
Series 30 PR AS 75 T 75 T 75 T 50 T 00 T 50 T AS 50 T RS T Width Depth 040 35 450 3039450 2 Adjustable shelves Width Depth 040 35 450 30394502 4 Drawers Single drawer opening device Width Depth 040 35 450 30394503 Adjustable shelf 3 Drawers Retractable shelf Single drawer opening device 00 T RS T 50 T Width Depth 040 35 450 without Tool holders 30394520 70 Tool holders ISOSK30 30394523 70 Tool holders ISOSK40 303945 40 Tool holders ISOSK50 30394525 50 Tool holders VDI 40 3039452 70 Tool holders HSK 50 30394527 50 Tool holders HSK 3 3039452 5 Tool cradles 5 Angled supports Width Depth 040 35 450 without Tool holders 30394530 5 Tool holders ISOSK30 30394533 5 Tool holders ISOSK40 30394534 Tool holders ISOSK50 30394535 40 Tool holders VDI 40 3039453 5 Tool holders HSK 50 30394537 40 Tool holders HSK 3 3039453 4 Tool cradles 4 Angled supports Retractable shelf Width Depth 040 35 450 without Tool holders 30394540 2 Tool holders ISOSK30 30394543 2 Tool holders ISOSK40 30394544 Tool holders ISOSK50 30394545 20 Tool holders VDI 40 3039454 2 Tool holders HSK 50 30394547 20 Tool holders HSK 3 3039454 2 Tool cradles 2 Angled supports 2 Drawers Single drawer opening device 2 RAL 502 RAL 0 RAL 7035 i Drawers: T = load capacity:200 kg extension 00%
Standard examples: AS AS PR 75 T 00 T AS 75 T 75 T AS 00 T 00 T AS RS T 50 T Width Depth 040 35 2000 30392000 4 Adjustable shelves Width Depth 040 35 2000 303920002 Adjustable shelf 3 Drawers Retractable shelf Single drawer opening device Width Depth 040 35 2000 303920003 Adjustable shelf 4 Drawers Single drawer opening device 00 T 50 T 50 T RS T Width Depth 040 35 2000 without Tool holders 303920020 2 Tool holders ISOSK30 303920023 2 Tool holders ISOSK40 3039200 4 Tool holders ISOSK50 303920025 0 Tool holders VDI 40 30392002 2 Tool holders HSK 50 303920027 0 Tool holders HSK 3 30392002 Tool cradles Angled supports Tool holders see page 5 Width Depth 040 35 2000 without Tool holders 303920030 4 Tool holders ISOSK30 303920033 4 Tool holders ISOSK40 303920034 4 Tool holders ISOSK50 303920035 0 Tool holders VDI 40 30392003 4 Tool holders HSK 50 303920037 0 Tool holders HSK 3 30392003 Tool cradles Angled supports Drawer Width Depth 040 35 2000 without Tool holders 303920040 5 Tool holders ISOSK30 303920043 5 Tool holders ISOSK40 303920044 Tool holders ISOSK50 303920045 40 Tool holders VDI 40 30392004 5 Tool holders HSK 50 303920047 40 Tool holders HSK 3 30392004 4 Tool cradles 4 Angled supports 2 Drawers Retractable shelf Single drawer opening device RAL 502 RAL 0 RAL 7035 3
Series 30 Partitioning material Standard examples: For front height: 50 and higher 050034 Troughs 3Trough 0 Trough dividers 2 Troughs 4Trough 30 Trough dividers For front height: 50 and higher 050234 Troughs 2Trough Trough dividers Troughs 3Trough 0 Trough dividers Troughs 4Trough 5 Trough dividers For front height: 50 05205 75 05207 0025 0520 Plastic boxes 50x50 For front height: 50 05405 75 05407 0025 0540 2 Plastic boxes 50x75 2 Plastic boxes 50x50 For front height: 50 053405 75 053407 0025 05340 50 05345 200250 053420 300 053430 4 Slotted partitions 27 Eh 2 Aluminium dividers 9 Eh 3 Aluminium dividers 2 Eh For front height: 50 053505 75 053507 0025 05350 50 05355 200250 053520 300 053530 5 Slotted partitions 27 Eh 2 Aluminium dividers 9 Eh For front height: 50 053705 75 053707 0025 05370 7 Slotted partitions 27 Eh 2 Aluminium dividers Eh 2 Aluminium dividers 9 Eh For front height: 50 05305 75 05307 0025 0530 Slotted partitions 27 Eh 2 Aluminium dividers Eh For front height: 50 05405 75 05407 0025 0540 50 0545 200250 05420 4 Plain partitions 27 Eh 4 Details of partitioning material on page2 i Label holders not included i Standard examples with slotted partitions are supplied with fixings
Tool holders Tool type ISOSK 25 ISOSK 30 ISOSK 40 ISOSK 45 ISOSK 50 HSK HSK 40 HSK 50 HSK 3 HSK 0 RED 305025 305030 305040 305045 305050 3054 305440 305450 30543 30540 HSK 00 305499 CAPTO C3 30503 CAPTO C4 30504 CAPTO C5 30505 CAPTO C 3050 CAPTO C 3050 VDI 20 30520 VDI 30 30530 VDI 40 30540 VDI 50 30550 VDI 0 3050 5 5 75 7 305005 305005 3050075 305007 05 305005 20 305020 No. of tools per tool holder 4 4 No. of tools per cradle 304540 4 4 9 4 0 7 2 0 4 4 9 4 2 0 7 No. of tools per frame 3043354 39 39 30 42 42 42 39 27 2 42 42 33 27 42 39 3 30 42 39 33 27 2 No. of tools per frame 3043454 52 52 40 5 5 5 52 3 2 5 5 44 3 5 52 4 40 5 52 44 3 2 5
Series 30 Adjustable shelf Made of highquality steel Usable Usable Smooth width depth capacity rubber mat kg 00 00 30 0 30202 00 00 3 30204 Shelf colour: Light grey RAL 7035 / Rubber mat: Black NC universal racks Made of highquality painted sheet steel. A modular shelving system with slotted side panels to allow accessories to be fitted to suit exact requirements. Consisting of a starter bay and extension bays. Open or closed with 2 door option: standard or Plexiglas. Universal racks with standard leaf doors Usable Usable Starter Extension width depth bay bay 0 35 2000 3020 30 35 2000 3023 Colours: see colour chart at the bottom of the page Universal racks without doors Usable Usable Starter Extension width depth bay bay 0 0 2000 303020 30 0 2000 303023 Colours: see colour chart at the bottom of the page Universal racks with Plexiglas leaf doors Usable Usable Starter Extension width depth bay bay 0 35 2000 303420 30 35 2000 303423 Colours: see colour chart at the bottom of the page RAL 502 RAL 0 RAL 7035 i Starter bays are supplied assembled
A B Tool cradles Made of highquality steel S 50 = 30 Eh Drawers To store tool holders. 2types available (with handle and without handle), fitted to the perforated sides of the universal rack using cradle supports. A Tool cradle Width 52 35 52 95 Made of steel. Fitted to the perforated sides of the universal rack. B Cradle support, pair without with Depth Handles Handles 55 30430 3043 55 304 30433 9Eh 9Eh Front Usable Lateral height height height capacity kg * 75 S 52 0 302075 00 S 77 0 30200 50 S 3 27 0 30250 S = simple extension: 5 90% extension * with load evenly distributed and at least one slotted divider in the middle 459 = 27 Eh Horizontal Angled, 20 30440 3044 Card insert and cellophane (spare part) For drawers: Eh 0005 Kit: 30 pieces C i With drawers it is necessary to install at least one adjustable shelf Fixed tool holder frame Made of highquality steel D To be fixed to the perforated sides of the racking. C Fixed tool holder frame S Drawer with tool holder frame Made of highquality steel Width Depth 54 59 D Frame support, pair No. of rows 0 4 304343 302072 Usable Usable Front width depth height Extension capacity % kg 445 505 00 S 590 % 0 3020 * with load evenly distributed Card insert and cellophane (spare part) For drawers: Eh 0005 Kit: 30 pieces Tool holders see page 9 i capacity is intended for evenly distributed loads 7
Series 30 Standard examples: without Door with standard Door Width Depth 0 0 2000 3030200 0 35 2000 30200 2 Tool cradles without handles 2 Cradle supports, angled with Plexiglas Door 3034200 without Doors with standard Doors Width Depth 290 0 2000 30370200 290 35 2000 30372200 Tool cradles without handles Cradle supports, angled with Plexiglas Doors 30374200 without Door with standard Door Width Depth 0 0 2000 30302002 0 35 2000 302002 4 Fixed tool holders frames 4rows 4 Frame supports, angled with Plexiglas Door 30342002 without Doors with standard Doors Width Depth 290 0 2000 303702002 290 35 2000 303722002 Fixed tool holders frames 4rows Frame supports, angled with Plexiglas Doors 303742002 RAL 502 RAL 0 RAL 7035 i Standard examples are supplied assembled
Tool holders Tool type ISOSK 25 ISOSK 30 ISOSK 40 ISOSK 45 ISOSK 50 HSK HSK 40 HSK 50 HSK 3 HSK 0 RED 305025 305030 305040 305045 305050 3054 305440 305450 30543 30540 HSK 00 305499 CAPTO C3 30503 CAPTO C4 30504 CAPTO C5 30505 CAPTO C 3050 CAPTO C 3050 VDI 20 30520 VDI 30 30530 VDI 40 30540 VDI 50 30550 VDI 0 3050 5 5 75 7 305005 305005 3050075 305007 05 305005 20 305020 No. of tools per tool holder 4 4 No. of tools per cradle 30430 5 5 5 4 7 5 7 5 4 No. of tools per frame 304343 20 20 20 2 20 2 20 No. of tools per frame 3020 2 2 2 2 2 5 2 2 5 2 2 2 2 5 2 2 9
Series 30 A Cabinet housings with leaf door Fixed tool holder frame Made of highquality steel B Fitted using frame supports, to the sides of the housing. A Fixed tool holder frame Made of highquality sheet steel. Housing sides and bases are painted with high resistance products, environmentally friendly. Available in one height only with sides slotted in increments of 25 to allow drawers, shelves and tool holder frames to be adjusted accordingly. Doors are fitted with safety cylinder lock and 2 keys and can be standard or in Plexiglas. Width Depth 90 447 B Frame support, pair No. of rows 0 3 3043354 with standard Doors with Plexiglas Doors Usable Width Depth height 02 555 2000 50 000 2000 Max load capacity: 00 kg Colours: see colour chart at the bottom of the page Angled 20 30072 Drawers Made of high quality steel Adjustable shelf Made of high quality steel Front Usable Usable height width depth Extension capacity % kg 00 S 9 459 5 50 3300 00 T 9 459 00 50 330 Width Depth capacity Slotted kg 000 500 35 0 3003 Hooks (spare part)kit: pieces 520000 90 RAL 502 RAL 0 RAL 7035 i capacity is intended for evenly distributed loads
Standard examples: Size: 02x555x2000 4 Fixed tool holders frames 3rows 4 Frame supports, angled 00040 Size: 02x555x2000 4 Fixed tool holders frames 3rows 4 Frame supports, angled 200040 3 00 S 00 S 3 00 S 00 S Size: 02x555x2000 2 Fixed tool holders frames 3rows 2 Frame supports, angled 2 Drawers normal extension 2 Adjustable shelves 0003 Size: 02x555x2000 2 Fixed tool holders frames 3rows 2 Frame supports, angled 2 Drawers normal extension 2 Adjustable shelves 20003 Tool holders see page 92 i Standard examples are not supplied with tool holders please order separately RAL 502 RAL 0 RAL 7035 9
Series 30 Tool holders For Tool holders ISOSK Bore Tool type Width Depth Ø No. of tools Holder RED ISOSK per tool holder type 25 05 3 20 4 F 305025 30 5 3 4 A 305030 40 5 3 3 A 305040 45 0 3 3 E 305045 50 05 3 3 F 305050 GREEN For Tool holders HSK Bore Tool type Width Depth Ø No. of tools Holder RED HSK per tool holder type 5 3 20,3 A 3054 40 5 3 20 30,4 A 305440 50 5 3 20 3,5 A 305450 3 5 3 20 4, B 30543 0 7 3 20 0, E 30540 00 05 3 20 7 F 305499 GREEN 3074 307440 307450 30743 30740 307499 For Tool holders Capto Bore Tool type Width Depth Ø No. of tools Holder RED CAPTO per tool holder type C3 20 3 20 4 G 30503 C4 5 3 20 A 30504 C5 5 3 20 A 30505 C 75 3 20 D 3050 C 7 3 20 E 3050 GREEN For Tool holders VDI Tool type VDI 20 30 40 50 0 Bore Width Depth Ø No. of tools Holder RED per tool holder type 5 3 20 A 30520 5 3 74 A 30530 5 3 2 B 30540 0 3 9 E 30550 00 3 4 F 3050 GREEN 92
For Tool holders DIY drilling Width Depth Holder RED type 5 3 20 A 305005 5 3 20 B 305005 75 3 20 D 3050075 7 3 20 E 305007 05 3 20 F 305005 20 3 20 G 305020 GREEN NC Tools stand Made of highquality steel To store tools on workbenches or cabinets. Width Depth 5 500 255 without Tool holders 3027 with Tool holders ISOSK30 302703 with Tool holders ISOSK40 302704 with 5 Tool holders ISOSK50 302705 with Tool holders VDI 40 30270 with Tool holders HSK 50 302707 with Tool holders HSK 3 30270, side supports see colour chart at the bottom of the page RAL 502 RAL 0 RAL 7035 93
Series 30 33 3 Eh Shelving system with drawers and shelves, depth 27 Eh see page 204 Universal shelving system with vertical drawers Shelving system with drawers and shelves, depth 3 Eh see page RAL 502 RAL 0 RAL 7035 5year Guarantee For your safety all shelving systems must be secured to the floor or wall Fixing material for shelving 00004 94
Technical specifications 50 E 50 D F C 50 A A A A A A B Internal dimensions A Bay Bay width 74 = 3 Eh Usable width= Bay width 7 = 45 Eh Usable width= 4 Bay width 020 = 54 Eh Usable width= 97 B Shelving system depth 70 = 3 Eh C Shelving system height 2000 2200 2500 D Front height with vertical drawers partial height 750 E Usable height Shelving system height 2000 2200 2500 to install drawers into lower section 00 300 00 F Front height Shelving system height 2000 2200 2500 with vertical drawers full height 900 200 00 Uprights are slotted in increments of 25 capacity Shelving system height 2000 2200 2500 Type of vertical drawer partial height full height partial height full height partial height full height capacity No. of universal per upright shelves Kg 3 5500 2 4500 3 5500 2 4500 3 5500 2 4250 i capacity is intended for evenly distributed loads 95
Series 30 33 3 Eh 7 Uprights Made of highquality steel, slotted in increments of 25 2 3 A without Lock ( A ) A2 with Lock for drawers partial height ( B ) ( 4 ) A A A A2 2 Side panels Made of highquality steel A Depth Width 2000 70 53 3370020 2200 70 53 3370022 2500 70 53 3370025 Colours: see colour chart at the bottom of the page A2 337020 337022 337025 Depth Width No. of panels 2000 70 23 2 3375200 2200 70 23 2 3375220 2500 70 23 2 3375250 Colours: see colour chart at the bottom of the page A without Lock A3 with Lock for drawers full height ( A ) 3 Back panels Made of highquality steel To be fitted onto the uprights to stabilise the unit bay. Upright Bay Bay Bay height 3 Eh 45 Eh 54 Eh No. of panels 2000 4 0 3520 5420 2200 4 2 3522 5422 2500 5 5 3525 5425 Colours: see colour chart at the bottom of the page ( C ) A A A A3 A Altezza Profondità Depth Larghezza Width 2000 70 53 3370020 2200 70 53 3370022 2500 70 53 3370025 Colours: see colour chart at the bottom of the page M0x0 Pair 00004 A3 3370420 3370422 3370425 9 RAL 502 RAL 0 RAL 7035 For your safety all shelving systems must be secured to the floor or wall
4 Locking mechanisms for vertical drawers J Locking mechanisms for horizontal drawers For vertical drawers, both partial and full height. k Bay width Eh 74 3 7 45 020 54 70030 70040 70050 (H) Shelving height 2000 2200 2500 (J) (K) Front Usable height height 750 00 33730 750 300 337330 750 00 33730 Upper shelves A Lower shelves C for vertical drawers full height Usable Usable Bay width width depth Eh A 74 3 705 50 337223 C 74 3 705 50 3372234 A 7 45 4 705 50 3372 C 7 45 4 705 50 33724 A 020 54 97 705 50 337225 C 020 54 97 705 50 3372254 capacity: 200kg Colours: see colour chart at the bottom of the page Universal shelves Made of highquality steel Usable Usable Bay width width depth Plain Eh 74 3 705 50 33703 7 45 4 705 50 337045 020 54 97 705 50 337054 capacity: 200kg Colours: see colour chart at the bottom of the page Upper shelves A Central shelves B Lower shelves for lock 4 for vertical drawers partial height Usable Usable Bay width width depth A 74 Eh 3 705 50 337223 B 74 3 705 50 33722 4 74 3 705 50 33734 A 7 45 4 705 50 3372 B 7 45 4 705 50 33722 4 7 45 4 705 50 33744 A 020 54 97 705 50 337225 B 020 54 97 705 50 3372252 4 020 54 97 705 50 33754 capacity: 200kg Colours: see colour chart at the bottom of the page Adjustable shelves for locking system Made of highquality steel. Lateral supports included Usable Usable Bay width width depth Eh 74 3 20 35 337203 7 45 4 20 35 337204 020 54 97 20 35 337205 capacity: 70kg Colours: see colour chart at the bottom of the page i capacity is intended for evenly distributed loads RAL 502 RAL 0 RAL 7035 97
Series 30 33 3 27x27 Eh Eh Vertical drawers partial height Vertical drawers full height Made of highquality steel. Available in one height and total extension version with steel roller bearings only, internal perforated panel allow secure fixing of hooks and other accessories. Made of highquality sheet steel. Available in 3 different heights, total extension version with steel roller bearings only, internal perforated panel allow secure fixing of hooks and other accessories. Usable Usable Front Front width width height width X X/X2 750 25 93 33702 50 / 33705 75 43 /93 33707 200 93/93 337020 * 220 93/05 337022 250 2 / 337025 250 2 93/43 337025 250 2 / 337025 300 2 43/43 337030 300 2 / 337030 * 330 43/ 337033 *only for bay width 74 / 3 Eh Total extension: 00% extension Max load 00kg internal, for drawer front see colour chart at the bottom of the page Usable Usable Upright Upright Upright Front width width height height height width X X/X2 2000 2200 2500 00 33720 33740 3370 25 93 33722 33742 3372 50 / 33725 33745 3375 75 43 /93 33727 33747 3377 200 93/93 337220 337420 33720 *220 05/05 337222 337422 33722 250 2 / 337225 337425 33725 250 2 93/43 337225 337425 33725 250 2 / 337225 337425 33725 300 2 43/43 337230 337430 33730 300 2 / 337230 337430 33730 *330 43/ 337233 337433 33733 *only for bay width 74 / 3 Eh Total extension: 00% extension Max load 500kg internal, for drawer front see colour chart at the bottom of the page Hooks for perforated panels see page 9 Perforated panels Made of highquality steel. Internally fixed to vertical drawers full height only, to allow for secure fixings of hooks and other accessories. 0x0 3 Shelving height No. of panels 2000 2 2200 2 2500 2 Usable height 75 95 225 3 Usable width 0 0 0 337720 337722 337725 9 RAL 502 RAL 0 RAL 7035 i capacity is intended for evenly distributed loads
00 Vertical tool storage supports Made of highquality steel A Retaining clamps with neoprene profile Tool Tool Collar type type Ø max. Depth No. of ISOSK HSK tools 30 50 5/3 5 33743 40 3 3/50 5 9 3374409 45 0 2/3 72 7 3374457 50 00 9/0 4 5 3374505 50 2/0 00 5 337455 For max. Ø No. of clamps A No. of units per profile 2 5 50 7505 3 27 2 5 75027 4 35 0 7 75035 5 4 90 7504 0 7 9 7500 7 73 5 75073 5 5 2 7505 9 9 5 40 7509 0 0 4 53 750 23 4 5 7523 2 35 3 0 7535 Trays Made of highquality steel Shelves Made of steel surround with wooden inlay. To be used in combination with support guides. Width Depth 00 90 00 00 5 00 3377709 33777 Width Depth A Art. 30 50 70 3377505 30 75 95 3377507 30 00 20 337750 30 25 45 337752 30 50 70 337755 capacity: 20kg with load evenly distributed A A B Support guides Neoprene profiles A B Support Neoprene Width Thickness guide profile 20 50 3374700 337470 99
Series 30 33 3 27x27 Eh Eh 3 x 3 Eh 45 x 3 Eh S Drawers S Drawers T T 2 = 3 Eh 75 = 45 Eh 53 9 Eh 53 9 Eh 2 = 3 Eh 53 9 Eh 53 9 Eh 2 = 3 Eh Made of highquality sheet steel. Available in two versions (simple or total extension) with steel roller bearings. All 4 drawer walls are slotted, for custom subdivision using partitioning material. All drawer handles are equipped with aluminium profiles, end caps and labelling strips. Front height Usable height Lateral height capacity kg * 50 S 3 33 0 033050 75 S 52 0 033075 75 T 54 52 200 03307 00 S 77 00 03300 00 T 79 77 200 0330 25 S 77 00 035 25 T 04 77 200 03 50 S 3 27 00 03350 50 T 29 27 200 0335 75 T 54 27 200 0337 200 S 77 00 0300 200 T 79 77 200 030 250 T 229 77 200 035 300 S 2 277 00 033300 300 T 279 277 200 03330 400 T 379 277 200 03340 S = simple extension: 5 90% extension T = total extension: 00% extension * with load evenly distributed and at least one slotted divider in the middle internal, for drawer front see colour chart at the bottom of the page Made of highquality sheet steel. Available in two versions (simple or total extension) with steel roller bearings. All 4 drawer walls are slotted, for custom subdivision using partitioning material. All drawer handles are equipped with aluminium profiles, end caps and labelling strips. Front height Usable height Lateral height capacity kg * 50 S 3 33 0 043050 75 S 52 0 043075 75 T 54 52 200 04307 00 S 77 00 04300 00 T 79 77 200 0430 25 S 77 00 045 25 T 04 77 200 04 50 S 3 27 00 04350 50 T 29 27 200 0435 200 S 77 00 0400 200 T 79 77 200 040 250 T 229 77 200 045 300 S 2 277 00 043300 300 T 279 277 200 04330 S = simple extension: 5 90% extension T = total extension: 00% extension * with load evenly distributed and at least one slotted divider in the middle internal, for drawer front see colour chart at the bottom of the page Card insert and cellophane (spare part) For drawers: 3 Eh 00035 Kit: 30 pieces Card insert and cellophane (spare part) For drawers: 45 Eh 000455 Kit: 30 pieces Partitioning material see page 43 Partitioning material see page 55 200 RAL 502 RAL 0 RAL 7035 i capacity is intended for evenly distributed loads
S T 54 x 3 Eh Drawers 9 S T Retractable shelves 53 9 Eh 53 9 Eh 2 = 3 Eh 9 = 54 Eh Made of highquality sheet steel. Available in two versions (simple or total extension) with steel roller bearings. All 4 drawer walls are slotted, for custom subdivision using partitioning material. All drawer handles are equipped with aluminium profiles, end caps and labelling strips. Front height Usable height Lateral height kg * 50 S 3 33 0 053050 75 S 52 0 053075 75 T 54 52 200 05307 00 S 77 00 05300 00 T 79 77 200 0530 25 S 77 00 055 25 T 04 77 200 05 50 S 3 27 00 05350 50 T 29 27 200 0535 200 S 77 00 0500 200 T 79 77 200 050 250 T 229 77 200 055 300 S 2 277 00 053300 300 T 279 277 200 05330 S = simple extension: 5 90% extension T = total extension: 00% extension * with load evenly distributed and at least one slotted divider in the middle internal, for drawer front see colour chart at the bottom of the page Card insert and cellophane (spare part) For drawers: 54 Eh 000545 Kit: 30 pieces Partitioning material see page 5 capacity Bay width capacity Extension Eh kg * % 75 74 3 00 5 03394 75 74 3 200 00 03395 75 7 45 00 5 04394 75 7 45 200 00 04395 75 020 54 00 5 05394 75 020 54 200 00 05395 * with load evenly distributed Colours: see colour chart at the bottom of the page D C Tool holder frame Width Depth 54 59 737 59 90 59 D Frame support, pair For taper length 00 355 5220 95225 C 2 = 3 Eh Drawer Eh No. of rows 3x3 4 304343 45x3 4 3043445 54x3 4 3043454 Depth 3 Eh 304340 304347 Section width 02 Tool holder frames for drawers Made of steel Details of partitioning material on page 2 RAL 502 RAL 0 RAL 7035 20