Type: EASY512 AC R Article No.: Ordering information Relay outputs Quantity 4 Power supply V DC 115/230 V AC. Description

Similar documents
Type: EASY719 DC RC Article No.: Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description

Type: DILM32 10(24V50HZ) Article No.:

Type: DILM50(230V50HZ,240V60HZ) Article No.:

Type: DILM9 10(24VDC) Article No.:

Type: DILM115(RAC240) Article No.: Sales text Contactor,55kW/400V,AC operated. Ordering information

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start * see variants. Applications.

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

Electronic overload relay EF19 and EF45

RM4TG20 three-phase network control relay RM4-T - range V

Safety technique. Emergency stop module BO 5988 safemaster

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)

Electronic overload relay EF65, EF96 and EF146

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Three-phase monitoring relay CM-PFE

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals

Technicaldata General

ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.

AF / AF09Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages

38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

Electronic timer CT-VBS OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories

Thermistor motor protection relays CM-MSS.22 and CM-MSS.23

38 Series - Relay interface modules A

RM35UA13MW. range V. Main. Product or component type. Relay monitored parameters

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

RM17TE V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1

Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41

38 Series - Relay interface modules A

Pluggable interface relays CR-P Pcb relays

48 SERIES Relay interface modules 10 A

Analog signal converters CC-E I/I Current / current isolators

VEO. V4PF480Y/277VSYTK02 Art.Nr.: V4PF480Y/277VSYTK02P Art.Nr.: TECHNICAL DATA

E-STOP relays, safety gate monitors

Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller

MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features

pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2, /0.65/0.

Logic module AC010. Content. Logic module AC010

Thermistor motor protection

Application Switchgear for industrial and commercial applications. U e V AC 230/ (per pole)

Redundancy Module QUINT-DIODE/40

Catalog. Modular DIN rail components Installation contactors

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A V AC coil

Relés e Contatores de Estado Sólido SIRIUS

H/L = Power supply. FN = Nominal Frequency. RN = Rated value of output burden. UN = Nominal input voltage. IN = Nominal input current.

Control Devices Catalogue. Control Devices. Preferred and Standard Products

80 Series - Modular timers 16 A. Features

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

Bulletin 150 SMC Flex Smart Motor Controller Specifications

Contact expander modules

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN , VDE 0113 Part 1

E-STOP relays, safety gate monitors

MasterINTERFACE 39 Series - Relay interface modules

Process modules Digital input PMI for 24 V DC inputs for 120 V AC inputs

MasterINTERFACE 39 Series - Relay interface modules

49 Series - Relay interface modules A. Features

Manual motor starter MS116

MILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS)

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51

EMR measuring and monitoring relays

ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG R0011

Bimetallic Overload Relay Specifications

Power Supply, Primary Switch Mode, Narrow Design MINI-PS AC/24DC/2

Power Supply, Primary Switch Mode, Narrow Design MINI-PS AC/2x15DC/1

Contact expansion modules

E-STOP relays, safety gate monitors

PHOENIX CONTACT Features

PNOZsigma - Base units

E-STOP relays, safety gate monitors

E-STOP relays, safety gate monitors

ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x , 2CDG1101xxR0011

MCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet _en_01. 1 Description

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw

Technical catalogue. Modular DIN rail components Installation contactors

Quick Connect. quick - simple - efficient.

40 Series - Miniature PCB/Plug-in relays A. Features

60 Series - General purpose relays 6-10 A. Features

Molded Case Circuit Breaker Specifications Bulletin Number 140U-D

Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter

RY2 miniature industrial relays

Multifunctional three-phase monitoring relays CM-MPS CM-MPS.43

Preset Counter signo 721

Easy Multifunctional Safe

Power Supplies 3. SDN-P DIN Rail Series

80 Series - Modular timers 16 A. Features

Digital input modules

J TB/TW Temperature limiter, temperature monitor

15 Series - Electronic step relay and dimmer. Features SERIE

TRACTION NETWORK MONITORING AND PROTECTION SYSTEM SMTN-3 CITY ELECTRIC TRANSPORT RAILWAYS METRO INDUSTRY

Single-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...

ABB i-bus KNX SA/S Switch Actuators Product Manual

PHOENIX CONTACT - 01/2007

LOGO!Power. Power supply. LOGO!Power. Overview. Description, device design, dimension drawing. Mounting/Disassembly 2

TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC A - M8 connector

Transcription:

Type: EASY512 AC R Article No.: 274103 Ordering information Relay outputs Quantity 4 Power supply V DC 115/230 V AC Description 8 digital inputs 4 relay outputs LCD display Operating buttons Screw terminals Notes concerning the product group Backup of real time clock (only for appropriate devices) Backup time (hours) 1

Operating time (years) General Standards EN 55011, EN 55022, IEC/EN 61000 4, IEC 60068 2 6, IEC 60068 2 27 Dimensions (W H D) mm 71.5 90 58 (4 PE) Weight kg 0,2 Mounting Terminal capacities Top hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4 101 GF1 (accessories) Solid mm 2 0.24 (AWG 22 12) Flexible with ferrule mm 2 0.22.5 (AWG 22 12) Standard screwdriver mm 3.5 0.8 Max. tightening torque Nm 0,6 Climatic environmental conditions Operating ambient temperature C Condensation LCD display (clearly legible) C 055 Storage C 40/+70 Relative humidity, non condensing (IEC/EN 60068 2 30) 25 to 55, cold as per IEC 60068 2 1, heat as per IEC 60068 2 2 Take appropriate measures to prevent condensation % 5 95 Air pressure (operation) hpa 795 1080 Corrosion resistance IEC/EN 60068 2 42 4 days SO 2 cm 3 /m 3 10 IEC/EN 60068 2 43 4 days H 2 S cm 3 /m 3 1 Ambient conditions, mechanical Pollution degree 2 Degree of protection (IEC/EN 60529) Vibrations (IEC/EN 60068 2 6) IP 20 Constant amplitude 0.15 mm Hz 10 57 Constant acceleration 2 g Hz 57 150 Mechanical shock resistance (IEC/EN 60068 2 27) semi sinusoidal 15 g/11 ms Impacts 18 Drop to IEC/EN 60068 2 31 Drop height mm 50 2

Free fall, packaged (IEC/EN 60068 2 32) Mounting position Electromagnetic compatibility (EMC) Electrostatic discharge (IEC/EN 61000 4 2, Level 3, ESD) m 1 Air discharge kv 8 Contact discharge kv 6 Electromagnetic fields (IEC/EN 61000 4 3, RFI) Radio interference suppression (EN 55011) Burst pulses (IEC/EN 61000 4 4, level 3) V/m 10 Supply cables kv 2 Signal lines kv 2 High energy pulses (surge) (IEC/EN 61000 4 5) High energy pulses (surge) (IEC/EN 61000 4 5, level 2) Immunity to line conducted interference to (IEC/EN 61000 4 6) Insulation resistance Clearance in air and creepage distances kv kv V 10 horizontal/vertical Insulation resistance EN 50178 Backup/accuracy of the real time clock Accuracy of the real time clock Repetition accuracy of timing relays Accuracy of timing relays (of values) Resolution % ± 1 Range S ms 10 Range M:S s 1 Range H:M min 1 Retentive memory Write cycles of the retentive memory Power supply Rated operational voltage U e V EN 55011 Class B, EN 55022 Class B 2 (supply cables, symmetrical, EASY...AC) 0.5 (supply cables, symmetrical, EASY...DC) EN 50178, UL 508, CSA C22.2, no. 142 typ. ± 5 (± 0.5 hannually) 1000000 (10 6 ) 100/110/115/120/230/240 AC (+10/ 15 %) 3

Admissible range V AC 85 264 Frequency Hz 5060 (± 5%) Input current at 115/120 V AC 60 Hz ma Normally 40 at 230/240 V AC 50 Hz ma Normally 20 Voltage dips (IEC/EN 61131 2) ms 20 Power loss at 115/120 V AC VA Normally5 at 115/230 V AC VA Normally5 Digital inputs 115/230 V AC Number 8 Status indication Potential isolation From power supply Between digital inputs From the outputs Rated voltage L (sinusoidal) LCD display (if present) No No Yes On 0 signal V AC 0 40 On 1 signal V AC 79 264 Rated frequency Hz 50 60 Input current on 1 signal I1 to I6 I7 to I8 Delay time Delay time (0 1/1 0) I1 to I6, I9 to I12, R1 to R12 ma ma Debounce ON 50/60 Hz ms 8066 Debounce OFF 50/60 Hz ms 2016 Delay time I7, I8 (1 0) Debounce ON 50/60 Hz ms 160150 Debounce OFF 50/60 Hz ms 100100 Delay time I7, I8 (0 1) Debounce ON 50/60 Hz ms 8066 Debounce OFF 50/60 Hz ms 2016 Max. admissible cable length (per input) I1 to I6 m 40 6 0.25 (at 115 V AC, 60 Hz) 6 0.5 (at 230 V AC, 50 Hz) 2 4 (at 115 V AC, 60 Hz) 2 6 (at 230 V AC, 50 Hz) 4

I7, I8 m Normally100 Relay outputs Number 4 Outputs in groups of 1 Parallel switching of outputs for increased output Protection of an output relay Potential isolation From power supply From the inputs From the PC interface, memory card NET network, EASY Link Not permissible Miniature circuit breaker B16 or fuse 8 A (slow) Yes Yes Safe isolation V AC 300 Basic insulation V AC 600 Lifespan, mechanical Operations 10 6 10 Contacts Conventional thermal current (10 A UL) Recommended for load: 12 V AC/DC Short circuit proof cos = 1, characteristic B16 at 600 A Short circuit proof cos = 0.5 to 0.7, characteristic B16 at 900 A Rated impulse withstand voltage U imp of contact coil A 8 No ma > 500 A 16 A 16 kv 6 Rated operational voltage U e V AC 250 Rated insulation voltage U i V AC 250 Safe isolation to EN 50178 between coil and contact Safe isolation to EN 50178 between 2 contacts Making capacity AC 15, 250 V AC, 3 A (600 Ops./h) DC 13 L/R 150 ms 24 V DC, 1 A (500 Ops./h) Breaking capacity AC 15, 250 V AC, 3 A (600 Ops./h) V AC 300 V AC 300 Operations 300000 Operations 200000 Operations 300000 Operations 200000 5

DC 13 L/R 150 ms 24 V DC, 1 A (500 Ops./h) Filament bulb load 1000 W at 230/240 V AC Operations 25000 500 W at 115/120 V AC Operations 25000 Fluorescent lamp load Fluorescent lamp load 10 58 W at 230/240 V AC With upstream electrical device Operations 25000 Uncompensated Operations 25000 Fluorescent lamp load 1 58 W at 230/240 V AC, conventional, compensated Switching frequency Operations 25000 Mechanical operations 10 6 10 Switching frequency Hz 10 Resistive load/lamp load Hz 2 Inductive load Hz 0,5 UL/CSA Uninterrupted current at 240 V AC A 10 Uninterrupted current at 24 V DC A 8 AC Control Circuit Rating Codes (utilization category) Max. rated operational voltage V AC 300 Max. thermal uninterrupted current = 1 at B 300 Max. make/break capacity 1 at B 300 DC Control Circuit Rating Codes (utilization category) A 5 B 300 Light Pilot Duty VA 3600360 Max. rated operational voltage V DC 300 Max. thermal uninterrupted current at R 300 A 1 Max. make/break capacity at R 300 VA 2828 Notes Dimensions Notes R 300 Light Pilot Duty For additional Technical Data EASY5... and EASY7... AWB2528 1508GB, 6

EASY8... AWB2528 1423D Dimensions Moeller GmbH, Hein Moeller Str. 7 11, D 53115 Bonn E Mail: catalog@moeller.net, Internet: www.moeller.net, http://catalog.moeller.net Copyright 2006 by Moeller GmbH. Subject to modifications. HPL C2006GB INT V2.3 7