ElEctric Pressure WashErs 19
Design Features Our s Our Motors Exclusively Baldor and Marathon induction motors with CSA approval. Totally enclosed, fan cooled with built in thermal overload. True operating horse power ratings with heavy duty electric cords make the difference in the field. All motors are wired with heavy duty 20 foot power cords. All motors and cords are water proof. Each motor is tested twice before delivery, first time without pump and final test run includes load test to ensure accurate amp draw. The finest quality featuring: brass manifolds, ceramic plungers (industrial models), soap injectors and thermal relief valves. Every pump is load tested for 9 minutes in our test facility. During this test the pressure is adjusted and a 17 point inspection is administered to ensure dependable operation before delivery. Design Our Frames Designed for durability and portability, each frame design has years of research and field testing behind it. Pneumatic wheels, removable handles and pre-drilled reel mounting plates allow for everyday contractor usage. Each frame is sand blasted and powder coated to ensure long durable colour finish. 20
ElEctric PrEssurE WashErs Design Features Our Promise To manufacture quality products at a competitive price that you will be proud to own. Our brand name is on the line every time you squeeze the trigger. Features Electric Advantages Clean, quiet and powerful - electric pressure washers operate with virtually no maintenance. Always a great alternative especially in voltages 220 and higher. Warranty All Electric Pressure Washers carry the following warranties: Frames Lifetime Motors s Light Industrial Excluding wear items s Industrial Excluding wear items Accessories Including hose reels, hose, gun, wand, tips, injector, couplers, unloaders wheels 2 Years 2 Years 5 Years 90 Days Note: Wear items consist of: Packing Kits, Oil Seal Kits, Valve Kits, O-Rings and Rubber Parts, Oil 21
Consumer 1755 PSI 1.5 GPM Home or consumer duty Brass pump parts 21 foot power cord - 120v 20 foot pressure hose Soap foamer attachment with adjustable metering Turbo nozzle Adjustable nozzle Portable cart Total shut off on trigger release Quick disconnect garden hose Warranty 90 days Void if used in commercial application AR1755 dar1755 1755 PSI, 1.5 GPM, 110V, 20 foot hose AR Induction Horsepower (HP / kw) 1.5 / 1.1 Phase 1 Voltage 120 Amp 15 AR Axial Operating Pressure (PSI / Bar) 1755 / 121 Volume (US GPM / Litres) 1.5 / 5.7 Pressure Hose (Ft. / m) 20 / 6 Dimensions (in / cm) 27 x 10 x 14 / 68 x 25 x 35 Net Weight (lb. / kg) 28 / 13 22
ElEctric PrEssurE WashErs Industrial 1500 PSI, 2.0 GPM Electric motor with shut off switch and auto safety overload cut out 20 foot electrical cord Triplex pump with ceramic plungers Maximum pump operating temperature of 70 C / 160 F Forged brass manifold with variable pressure control Chemical injector with soap metering valve Thermal relief valve Powder coated frame with removable handle 10 inch pneumatic wheels 36 inch gun and wand assembly Non-marking high pressure hose Nozzle orifice size - 4.0 4 Quick coupled nozzles: 15 (yellow), 25 (green), 40 (white) and 50 (black soap tip) Warranty: 5 Year Limited (Excluding Wear Items) Motor Warranty: 2 Years Options 50 foot hose reel Auto stop/start dbgp172es General - 1500 PSI 2.0 GPM, 2.0HP, 110V, Two handle "E" frame, 25 foot hose BGP172ES BGP172ES Baldor or Marathon Horsepower (HP / kw) 2.0 / 1.5 Phase 1 Voltage 110 / 220 Amp 17.2 / 6.6 General Operating Pressure (PSI / Bar) 1500 / 103 Volume (US GPM / Litres) 2.0 / 7.6 Pressure Hose (Ft. / m) 25 / 7 Dimensions (in / cm) ES 36 x 21 x 34 / 87 x 51 x 82 Net Weight (lb. / kg) ES 94 / 43 Shown with optional Hose Reel & Auto Stop/Start BGP172ESH5 23
Industrial 1500 PSI, 2.0 GPM Electric motor with shut off switch and auto safety overload cut out 20 foot electrical cord Triplex pump with ceramic plungers Maximum pump operating temperature of 70 C / 160 F Forged brass manifold with variable pressure control Chemical injector with soap metering valve Thermal relief valve Powder coated frame with removable handle 10 inch pneumatic wheels 36 inch gun and wand assembly Non-marking high pressure hose Nozzle orifice size - 4.0 4 Quick coupled nozzles: 15 (yellow), 25 (green), 40 (white) and 50 (black soap tip) Warranty: 5 Year Limited (Excluding Wear Items) Motor Warranty: 2 Years Options 50 foot hose reel Auto stop/start dbc172es Cat - 1500 PSI 2.0 GPM, 2.0HP, 110V, Two handle "E" frame, 25 foot hose BC172ES BC172ES Baldor or Marathon Horsepower (HP / kw) 2.0 / 1.5 Phase 1 Voltage 110 / 220 Amp 17.2 / 6.6 Cat Operating Pressure (PSI / Bar) 1500 / 103 Volume (US GPM / Litres) 2.0 / 7.6 Pressure Hose (Ft. / m) 25 / 7 Dimensions (in / cm) ES 36 x 21 x 34 / 87 x 51 x 82 Net Weight (lb. / kg) ES 94 / 43 Shown with optional Hose Reel & Auto Stop/Start BC172ESH5 24
ElEctric PrEssurE WashErs Industrial 2000 PSI, 2.0 GPM Electric motor with shut off switch and auto safety overload cut out Manual start switch with water tight enclosure 20 foot electrical cord Speck triplex Industrial Duty pump with ceramic plungers Maximum pump operating temperature of 70 C / 160 F Forged brass manifold with variable pressure control Chemical injector with soap metering valve Powder coated frame with removable handle 10 inch pneumatic wheels 36 inch gun and wand assembly Non-marking high pressure hose Nozzle orifice size - 2.5 4 Quick coupled nozzles: 15 (yellow), 25 (green), 40 (white) and 50 (black soap tip) Warranty: 5 Year Limited (Excluding Wear Items) Motor Warranty: 2 Years BC202ES Options 50 foot hose reel Auto stop/start dbc202es Cat - 2000 PSI, 2.0 GPM, 3.0HP, 220V, Two handle "E" frame, 25 foot hose Baldor or Marathon Horsepower (HP / kw) 3.0 / 2.3 Phase 1 Voltage 208 / 230 Amp 13.7 / 12.5 Cat Operating Pressure (PSI / Bar) 2000 / 138 Volume (US GPM / Litres) 2.0 / 7.6 Pressure Hose (Ft. / m) 25 / 7 Dimensions (in / cm) ES 36 x 21 x 34 / 87 x 51 x 82 Net Weight (lb. / kg) ES 94 / 43 Shown with optional Hose Reel & Auto Stop/Start BC202ESH5 25
Industrial 2000 PSI, 4.0 GPM Baldor motor with shut off switch and auto safety overload cut out Manual start switch with water tight enclosure 20 foot electrical cord Triplex pump with ceramic plungers Maximum pump operating temperature of 70 C / 160 F Thermal relief valve Forged brass manifold with variable pressure control Chemical injector with soap metering valve Powder coated frame with removable handle 13 inch pneumatic wheels 36 inch gun and wand assembly Non-marking high pressure hose Nozzle orifice size - 4.0 4 Quick coupled nozzles: 15 (yellow), 25 (green), 40 (white) and 50 (black soap tip) Warranty: 5 Year Limited (Excluding Wear Items) Motor Warranty: 2 Years Options 50 foot hose reel Auto Start/Stop BGP204 BGP204CS / CT dbgp204cs Single Phase General - 2000 PSI, 4.0 GPM, 5.0HP, 1 Phase, Two handle "C" frame, 50 foot hose dbgp204ct Three Phase General - 2000 PSI, 4.0 GPM, 5.0HP, 3 Phase, Two handle "C" frame, 50 foot hose Baldor Horsepower (HP / kw) 5.0 / 3.7 Phase 1 / 3 Shown with optional hose reel, auto start/stop BGP204CSTH Voltages (1 Phase / 3 Phase) 230 / 208, 230, 460 Amps (1 Phase / 3 Phase) 23 / 13.8, 13.4, 6.7 General T9281 Operating Pressure (PSI / Bar) 2000 / 138 Volume (US GPM / Litres) 4.0 / 15.1 Pressure Hose (Ft. / m) 50 / 15 Dimensions (in / cm) CS/CT 38 x 23 x 37 / 92 x 56 x 88 Net Weight (lb. / kg) CS/CT 163 / 74 26
ElEctric PrEssurE WashErs Industrial 3000 PSI 4.0 GPM Baldor motor with shut off switch and auto safety overload cut out Manual start switch with water tight enclosure 20 foot electrical cord Triplex pump with ceramic plungers Maximum pump operating temperature of 70 C / 160 F Thermal relief valve Forged brass manifold with variable pressure control Chemical injector with soap metering valve Powder coated frame with removable handle 13 inch pneumatic wheels 36 inch gun and wand assembly Non-marking high pressure hose Nozzle orifice size - 4.0 4 Quick coupled nozzles: 15 (yellow), 25 (green), 40 (white) and 50 (black soap tip) Warranty: 5 Year Limited (Excluding Wear Items) Motor Warranty: 2 Years Options 50 foot hose reel Auto Start/Stop BGP304 BGP304CS / CT dbgp304cs Single Phase General - 3000 PSI, 4.0 GPM, 7.5HP, 1 Phase, Two handle "C" frame, 50 foot hose dbgp304ct Three Phase General - 3000 PSI, 4.0 GPM, 7.5HP, 3 Phase, Two handle "C" frame, 50 foot hose Baldor Horsepower (HP / kw) 7.5 / 5.5 Phase 1 / 3 Shown with optional hose reel, auto start/stop BGP304CTTH Voltages (1 Phase / 3 Phase) 208, 230 / 208, 230, 460 Amps (1 Phase / 3 Phase) 33.7, 32 / 21, 20, 10 General T9281 Operating Pressure (PSI / Bar) 3000 / 207 Volume (US GPM / Litres) 4.0 / 15.1 Pressure Hose (Ft. / m) 50 / 15 Dimensions (in / cm) CS/CT 38 x 23 x 37 / 92 x 56 x 88 Net Weight (lb. / kg) CS/CT 185 / 84 27
Industrial 2000 PSI 4.0 GPM Baldor motor, totally enclosed, fan cooled with overload cut out Automatic start stop, flow control with timer 20 foot electrical cord Triplex pump with ceramic coated plungers Maximum pump operating temperature of 70 C / 160 F Thermal relief valve Forged brass manifold with variable pressure control Hose reel with spring loaded lock Chemical injector with soap metering valve Powder coated tubular steel "F" frame for wall mount use 36 inch gun and wand assembly Frame holes are keyhole style and pre-drilled to 16" centers Non-marking high pressure hose Nozzle orifice size - 4.0 4 Quick coupled nozzles: 15 (yellow), 25 (green), 40 (white) and 50 (black soap tip) Warranty: 5 Year Limited (Excluding Wear Items) Motor Warranty: 2 Years BGP204FSTH d BGP204FSTH General - 2000 PSI, 4.0 GPM, 5.0HP, 1 Phase, Hose reel, Auto start/stop, Wall mounted "F" frame with 50 foot hose Baldor Horsepower (HP / kw) 5.0 / 3.7 Phase 1 Voltage 230 Amp 23 General T9281 Operating Pressure (PSI / Bar) 2000 / 138 Volume (US GPM / Litres) 4.0 / 15.1 Pressure Hose (Ft. / m) 50 / 15 Dimensions (in / cm) 32 x 15 x 29 / 77 x 36 x 70 Net Weight (lb. / kg) 163 / 74 28
ElEctric PrEssurE WashErs Factory Options Model Auto Stop / Start High Pressure Soap Hose Reel 575V AR1755 Standard BGP172ES UGAST1 UGSOAP UGREEL BC172ES UGAST1 UGSOAP UGREEL BC202ES UGAST4 UGSOAP UGREEL Auto Stop / Start BGP204CS UGAST2 UGSOAP UGREEL BGP204CT UGAST2 UGSOAP UGREEL UG575 BGP304CS UGAST2 UGSOAP UGREEL BGP304CT UGAST2 UGSOAP UGREEL UG575 UGSOAP BGP204FSTH Standard UGSOAP Standard UGREEL Factory Options 29
Warranty STORM Pressure Washers will repair or replace, free of charge, any part or parts that are defective in material or workmanship. Transportation on parts or equipment submitted for repair or replacement under this warranty remains the responsibility of the purchaser. This warranty is effective for the time periods and subject to the conditions provided for in this policy. Warranty work must be performed by an authorized STORM Pressure Washers Warranty Depot. For details on warranty locations, contact STORM Pressure Washers at 1 (800) 882-1961. STORM reserves the right to refuse any claim do to negligence or abuse. Warranty Period Warranty coverage commences on the date of purchase by the end user or on the date the product has been first used for demonstration purposes. Parts and Accessories: 90 Days - excluding wear items Machines: Consumer Duty 1 year - excluding wear items Machines: Light Industrial 2 years - excluding wear items Machines: Industrial: Motors 2 years excluding wear items Machines: Industrial: s 5 years excluding wear items Disclaimer Items not covered under warranty include normal wear & tear items such as O-rings, V-sleeves and packings, hose outer protective jacket, unloaders and spray nozzles. Customer Responsibility Customer must complete and submit warranty registration form online for each new machine within 90 days of purchase date. Proper service must be performed as detailed in the owner s manual. NOTE: Use only STORM approved pump oil, as indicated in the owner s manual. Modifications and after market parts or accessories may void overall warranty coverage. Repairs required as a result of collision, accident, negligence, misuse and lack of maintenance are not covered under warranty. Repair work, including disassembly inspections, must be performed by an authorized STORM Pressure Washers Depot. Customer must provide the means of delivering the product to and from the STORM Pressure Washers Warranty Depot. (Freight is not an expense covered under warranty). For the nearest STORM Pressure Washers Warranty Depot, please call STORM Pressure Washers toll free at 1 (800) 882-1961. STORM Pressure Washers shall not be liable for loss of time or use of the product, or any other indirect, incidental or consequential damages, inconvenience or commercial loss. Warranty 30