Bourbon Atibaia Spa Resort - Atibaia, SP - Brazil April 23-25, 2013 FINAL PROGRAM Organization: Academic Challenge Sponsor: Andean Lima April, 15-16 Argentina Buenos Aires April, 16-17 Chile Santiago April 18-19 Brazil Atibaia April 23-25 Sponsors:
Bourbon Atibaia Spa Resort - Atibaia, SP - Brazil April 23-25, 2013 welcome THE EVENT The ESSS CONFERENCE & ANSYS USERS MEETING is the most traditional discussion forum for users of simulation software applied to product development in South America. During the course of three days, engineers, designers and researchers will have the opportunity to exchange ideas and experiences in Computer Aided Engineering (CAE) and to improve their engineering simulation skills through training courses, software update, plenary sessions, free workshops, user technical presentations, mini-symposia, and ask the expert sessions. Join us and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce their product development cycle time. REGISTRATION Pre-Conference Training Courses Plenary Keynote Speakers Software Update Free Workshops 80+ User Technical Presentations Ask the Expert Mini-Symposia Academic Challenge www.esss.com.br/usersmeeting
CONFERENCE AT-A-GLANCE uu April 23 uu April 24 uu April 25 8:00 Registration Open 8:30 TRAINING COURSES 8:00 Registration Open 8:30 FREE WORKSHOPS 8:00 Registration Open 8:30 FREE WORKSHOPS 10:00 REFRESHMENTS IN EXHIBITION AREA 10:30 TRAINING COURSES 9:30 SOFTWARE UPDATE 10:30 REFRESHMENTS IN EXHIBITION AREA 11:00 OPENING SESSION 11:10 PLENARY SESSION 9:30 SOFTWARE UPDATE 10:30 REFRESHMENTS IN EXHIBITION AREA 11:00 PLENARY SESSION 12:00 LUNCH 12:50 LUNCH 12:30 ESSS ACADEMIC CHALLENGE AWARD 12:50 LUNCH 14:00 TRAINING COURSES 14:30 technical sessions MINI-SyMPOSIa 14:30 technical sessions MINI-SyMPOSIa 15:30 REFRESHMENTS IN EXHIBITION AREA 16:00 TRAINING COURSES 15:30 REFRESHMENTS IN EXHIBITION AREA 16:00 technical sessions MINI-SyMPOSIa 15:30 REFRESHMENTS IN EXHIBITION AREA 16:00 technical sessions MINI-SyMPOSIa 17:30 end of 1 st day 17:20 ASK THE EXPERT 17:50 CONFERENCE SOCIAL (COCKTAIL) 17:20 ASK THE EXPERT 17:50 CLOSING SESSION (EACH ROOM)
South America Regional Series in Numbers The South America Regional Series will be held in Brazil, Argentina, Chile and Peru. At the end of this conference series, more than 150 companies, universities, and R&D Centers will present a total of 150 user technical papers to approximately 600 attendees in South America. Andean Lima April 15-16 Argentina Buenos Aires April 16-17 Chile Santiago April 18-19 Brazil São Paulo April 23-25 Technical Papers 20 20 30 80 Companies attendance 20 25 25 60 Universities / r&d centers attendance 10 15 10 30 expected number of attendees 70 130 100 270 www.esss.com.br/usersmeeting
training courses Vibroacoustics - Fundamentals and Simulation Contents: 1. Vibroacoustics Fundamentals: Introduction to Vibration; System of 1 DOF; Vibrations Control; Vibration Measurement; Modal Analysis; What s Noise; Sound Wave Generation and Propagation; Sound Quantity Units; db and dba Scales; Noise Effects over the Human Body; Noise Control; Noise Measurement. 2. Structural Dynamics and Acoustics Analysis using ANSYS: Introduction to ANSYS; Modal Numerical Analysis; Harmonic Analysis; Acoustic Boundary Conditions; Beam Modal and Harmonic Analyses and its Experimental Validation; Modal and Harmonic Analyses of a Plate; Introduction to ANSYS Acoustics Capabilities; Boundary Conditions; Modal and Harmonic Analyses of Acoustic Cavity; Numerical Analysis and Experimental Validation of a Acoustic Muffler; Result Analysis and Conclusions. Instructor: Edmar Baars - Vibroacústica Schedule: April 23 Lenght: 8 hours Fee: R$ 1.150,00 (20% off for academic students). Advanced Technologies with ANSYS Mechanical 14.5 Contents: Object Generator; Multizone Meshing; Sub Modeling; Explicit to Implicit; Reactions on Surface; Result Trackers. Instructor: Tim Pawlak - ANSYS, Inc. Schedule: April 23 Lenght: 8 hours Fee: R$ 1.150,00 (20% off for academic students). Fatigue Analysis Techniques using ncode DesignLife Contents: Introduction to Fatigue and ncode DesignLife; DesignLife Fundamentals; Advanced Edit; Bill of Material; Multiple Fatigue Analysis Runs; Batch Jobs; Virtual Strain Gage; Spot Weld Fatigue; Seam Weld Fatigue; Modal Superposition; Vibration Fatigue; Dang Van Multiaxial Fatigue; Adhesive Bonds; Short Fiber Composite Materials. Instructor: Erik Ostergard - HBM ncode Schedule: April 23 Lenght: 8 hours Fee: R$ 1.150,00 (20% off for academic students).
training courses Best Practices for CFD Turbulence Modeling using ANSYS Fluid Dynamics Contents: 1. Turbulence Modeling Overview: Characteristics of Turbulent Flows; Simulation Approaches; Theory. 2. Reynolds Averaged Navier-Stokes (RANS) models in ANSYS CFD: Spalart-Allmaras Model; k-e Family of Models; k-w Family of Models; Reynolds Stress Models. 3. Near Wall Turbulence Modeling: Law of the Wall; Wall Functions; Enhanced Wall Treatment; Implications for Meshing. 4. Transition Modeling: Transition Models. 5. Hybrid Modeling Approaches: Hybrid RANS-LES Methods: Motivation; Detached Eddy Simulation (DES); Scale Adaptive Simulation (SAS). 6. Large Eddy Simulation (LES): Motivation; Theoretical background; Zonal Methods: Embedded LES (ELES); Wall Modeled LES (WMLES). Instructor: Christian Lübon - ANSYS Germany GmbH Schedule: April 23 Lenght: 8 hours Fee: R$ 1.150,00 (20% off for academic students). Signal and Power Integrity of Electronic Systems Contents: Introduction to Signal and Power Integrity; HFSS Overview; Simulation Basics; HFSS for ECAD; Designer/Nexxim Overview; QuickEye and VerifEye. Instructor: Markus Kopp - ANSYS, Inc. Schedule: April 23 Lenght: 8 hours Fee: R$ 1.150,00 (20% off for academic students). DoE & Sensitivity Analysis Contents: 1. Deterministic vs Statistical Sensitivity: The goal of sensitivity analysis; Derivatives as local sensitivity; Statistic approach for sensitivity. 2. Design of Experiments for Numerical Simulation: Why DoE; Basic DoE techniques; Full Factorial Techniques; Advanced DoE. 3. Robustness & Reliability: Monte Carlo; Latin Hypercube; Taguchi. 4. Variance Decomposition: Covariance; Correlation; ANOVA; Linear Regression. 5. Data & Sensitivity Analyses: Numerical Simulation Example - FEA; Numerical Simulation Example - CFD. Instructor: Guilherme Jenovencio - ESSS Schedule: April 23 Lenght: 8 hours Fee: R$ 1.150,00 (20% off for academic students).
FREE WORKSHOPS uu April 24 8:30-9:00 9:00-9:30 Room piracicaba itú sorocaba campinas itupeva valinhos FLUENT with TGrid Meshing and Mesh Reactive Flow and Combustion Advanced Composite Modeling with 14.5 Enhancements for Contact Post-processing for Rotary Electrical HFSS for ECAD Morpher Simulation ACP Modeling Machinery TGrid Mesh Generation inside Fluent; Mesh Morpher Applications. Instructor: Leon White Turbomachinery New Transient Formulation for Turbomachinery Applications. Instructor: Bruno Contessi Finite-rate Volumetric Reaction Models General Concepts; Non-premixed Combustion Models; Premixed and Partially Premixed Combustion Models; Best Practices. Instructor: Ana Paula Faria Multiphase Flow Discrete Phase Model (DPM) x Eulerian Model; Eulerian Models: VOF, Mixture Model, Eulerian-Eulerian; Phase interaction: Momentum Transfer; Best Practices. Instructor: Rodrigo Peralta ACP Overview; Typical Modeling with ACP; Cylindrical Tank Study. Instructor: Eduardo Araújo Explicit Dynamics for Drop Test Analysis Meshing Best Practices; General Setup Recommendations; Drop Test Analysis Example; Results Verification. Instructor: Ivan Thesi Trim Contact; Shell Thickness Effect; Connection Matrix; Best Practices and Tips. Instructor: Roberto Silva Workbench 14.5 Ease of Use Tricks Object Generator; Tags; New Post-processing Features. Instructor: Pedro Cheroto Maxwell User Defined Outputs (UDO); Average & RMS Solutions of Electric Machines; Transient d-q Solutions of Electric Machines. Instructor: Diogo Figueiredo FEA-EDA Multiphysics Coupling using ANSYS Workbench Maxwell - Workbench Mechanical 1-Way Coupling; Toyota Prius IPM Motor Vibrational Study (2004). Instructor: Diogo Figueiredo HFSS Solver on Demand; DDR3 Virtual Compliance; Signal Integrity Analysis; Launching HFSS from SIwave. Instructor: Juliano Mologni Finite Antenna Array Design using HFSS DDM Antenna Array Mask; Composite Excitation; Domain Decomposition. Instructor: Juliano Mologni uu April 25 Room piracicaba itú sorocaba campinas 8:30-9:30 CAD/CAE Integration by SpaceClaim Instructor: Roman Walsh Design Optimization Instructor: Guilherme Jenovencio ANSYS Customization Tool Kit & ANSYS EKM ACT Overview; ACT by Example: Beam Results / Submodeling; ACT: A Deeper Look; EKM Overview. Multiphysics Analysis of Real Industry Problems Instructor: Juliano Mologni Instructors: Luiz Lima / Vinicius Strugata
SOFTWARE UPDATE uu April 24 Room piracicaba itú sorocaba 9:30 - ANSYS Fluid Update ANSYS Electromagnetics Update ANSYS Structural Update 10:30 Christian Lübon ANSYS Germany GmbH Markus Kopp ANSYS, Inc. Tim Pawlak ANSYS, Inc. uu April 25 Room piracicaba itú sorocaba 9:30 - modefrontier Update ncode Update ANSYS Workbench Update 10:30 Nader Fateh Esteco Erik Ostergard HBM ncode Sanjay Angadi ANSYS, Inc.
PLENARY SESSION uu April 24 uu April 25 Room londrina Room LONDRINA 11:00 OPENING SESSION Clovis Maliska Jr. - ESSS President 11:00 Rogério Amaury de Medeiros - FINEP - MCTI Chief of Department of Monitoring, Evaluation and Information Management Innovation in Brazil - Inova Empresa Program 11:10 Barry Christenson - ANSYS, Inc. Director of Product Management ANSYS Corporate and Product Road Map 11:30 Paulo de Mattos Pimenta - USP Department of Structural and Geotechnical Engineering Fluid Dynamic and Structural Finite Element Analysis of the Brasília National Stadium 11:40 José Luiz Albertin - ABNT CB05 Chief of Secretariat Globalization and Competitiveness. Standards Allow Go Faster 12:00 Eduardo Alves Cardoso - Electrolux do Brasil S.A Food Preservation and Air Care R&D Laboratory Manager Global Leader of Networking Simulation Module - CFD 12:10 Flávia Pacheco Teixeira da Silva - Petrobras/Cenpes Reservoir Simulation and Evaluation Simulation Technology by Electrolux Technology Challenges at Petrobras: Vision for Geoengineering and Well Engineering
USER TECHNICAL SESSIONS uu April 24 Room piracicaba itú sorocaba campinas itupeva valinhos Automotive Fabiano Diesel 14:30 Modeling Strategies for Explicit Simulation of Balistic Impacts Luiz Lima - IME / ESSS 14:50 Non-linear Structural Analysis of Automotive Component Assembled by Pin Fixture Wiliam Tean Su - ThyssenKrupp 15:10 Brake Squeal Analysis Fabiano Diesel - Fras-Le / ESSS 15:30 REFRESHMENTS IN EXHIBITION AREA Automotive & Aerospace Fabio Yukio 16:00 On the Deployment of a Gliding Bomb Mateus Gomes Filgueiras - Magnaghi Friuli Aeroespace 16:20 CFD Applied to the Simulation of a Cylinder-piston Assembly Darlan Costa Porto - UGF 16:40 Tosca - Virtual CAE Leandro Garbin 17:00 Frequency Response Functions of an Automotive Chassis (Body in White) Celso Kenzo - Vibroacústica - FIAT Appliances José Anchieta Acoustic and Fluid Dynamic Performance of Industrial Mufflers Celso Kenzo - Vibroacústica - EletrodB Vibroacoustic Analysis of the Ressonance Box of a Viola Caipira José M. Campos Dos Santos - Unicamp Study of the Dynamic Behavior of the VRU Compressor Danuza Santana Dias - SKF Appliances Ivan Thesi Active Control of a Beam Structure Using Piezo-electric Actuators in ANSYS Aureliano R. Barborati Ribeiro - UNIFEI Thermal Shock Stress Analysis of Flexible Printed Boards considering the Solders Joints of Electronic Components using ANSYS Luciano Arruda - Inst. Nokia de Tecnologia SGI André Gardinalli Workbench, APDL and One Unusual Finite Element Application Marcos G. Dropa de Bortoli - EMBRACO Metals & Mining Nicolas Spogis Computational Analysis of the Cooling of Rolls Used in the Transport of Slabs From Continuous Casting Leonardo Camilo dos Reis - Usiminas Fatigue Analysis of CVC-Type Rolling Mill Rolls Yukio Shigaki - CEFET-MG Ore Blocks Restraint Structures in Crushing Plants Jose Cléber Rodriges da Silva - VALE Civil & Health Eduardo Araújo Numerical and Experimental Verification of the Point of Enchasing of Orthopedic Pins Depending on the Method of Attachment Alfonso Pappalardo Junior - Mackenzie Fatigue Analysis of a Simple Shaft under Combined Bending and Torsion Eduardo Araujo - ESSS Materialise Daniel Almeida Finite Element Analysis of Dynamic Behavior of Stadium Stands Carlos Alberto Medeiros - VALE Power Generation Armando de Souza Fluid Mechanic Relationship in a Francis Runner Turbine Michelle Abreu - Andritz Evaluation of Actuating Discs in Horizontal Axe Wind Turbines with CFD José Leandro Rosales Luz - STE Structural Control of a Wind Turbine Using a Tuned Mass Damper Via Finite Element Method Suzana Moreira Avila - UnB Power Generation Luiz Lima Underhood Thermal Management Using CFD Armando de Souza - Agrale / ESSS Numerical Analysis of the Effects of Cross-Section Variation of Microchannels in Single-phase Laminar Flow Fabiano da Rosa Hollweg - Unisinos Comparative Study of Calculation Methods of Hydraulic Turbine s Wicket Gates Eduardo Koichi Iha - Andritz Marine & Offshore Roberto Silva Structural Study of an Ocean Racing Trimaran Using Finite Element Method Thiago Pontin Tancredi - USP Modeling of the Wind Flow Action Over Offshore Structures with Application on a FPSO Helideck Wilques W. Ferreira Pinheiro - Solitons Finite Element Analysis Parameterization - Structural Analysis of Reels Thiago Pontual - Technip Marine & Offshore Raphael David Numerical Simulation of Self-propelling Essay of a Displacement Hull Alexandre Teixeira de Pinho Alho - UFRJ CFD Simulations for Environmental Loads on a Supply Boat Daniel Fonseca de C. e Silva - Petrobras Next Engine Marcos Langeani Buckling in a Semi-Submersible: A Parametric Analysis and Mass Optimization Thiago Pontin Tancredi - USP 17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Chemical Process Andressa Ribeiro Turbulent Free Surface and Dispersed Phase Flow in Stirred Tank: VOF and ASM Approach Daniel da Cunha Ribeiro - UFES Energy and Momentum Transfer Analysis of a Distillation Column Sieve Tray for an Ethanol-Water System Using CFD Techniques Gabriel Henrique Justi - UFSCar Simulation of a Water Spray System in Process Vessel Fabio Nader Azar - Safetyeng Oil & Gas - CFD João Aguirre CFD Analysis of Transient Temperature Profile in Coke Drums with Different Feed Nozzles Arrangements Mariana Nogueira Dantas - ESSS Prediction of Hydrodynamics and Efficiency of a Distillation Sieve Tray by CFD Simulation Gladson Cintra de Oliveira - UFSCar Nvidia Marcio Aguiar The Rule of Comprehensive Modeling for Kraft Chemical Recovery Boiler Daniel José de Oliveira Ferreira - USP
USER TECHNICAL SESSIONS uu April 25 Room piracicaba itú sorocaba campinas itupeva Appliances Martin Kessler 14:30 Multidisciplinary Optimization of Axial Ventilation Holes for Medium Voltage Induction Motors Rafael S. Barbetta - WEG Equip. Elétricos S.A. 14:50 CFD Validation with ASME V&V 20 - Total Frost Free Refrigerator Hugo Flávio Benassi Zanqueta - Electrolux 15:10 The Effect of Thermodynamic Properties on Reciprocating Compressors Effective Areas Diogo Lôndero da Silva - Embraco 15:30 REFRESHMENTS IN EXHIBITION AREA Appliances Armando de Souza 16:00 Methodology of Gas Injection Analysis in a Metallurgical Device Leonardo Cruz Arantes Campos - Magnesita 16:20 modefrontier as a Design Tool for Compressors Suction Systems Talita Wajczyk - Embraco 16:40 Granta Design Gustavo Olivella 17:00 Using DX to Optimize the CFD Parameters Calibration Process Cassiano A. Cezario - WEG Equip. Elétricos S.A. Oil & Gas - FEA Roberto Silva In-Situ Repair of Tubular Casings of Offshore Structures Pumps Gilson Gomes da Silva - Petrobras Analysis of a Polymeric Insert With Metallic Core For Bend Stiffener Adaptors Anderson Cunha dos Santos - GE Modal Analysis of a Suction Vessel of a Reciprocating Compressors Luis Guilherme T. Silveira Leite - Petrobras Oil & Gas - FEA Luiz Lima Submodeling in ANSYS Workbench 14.5 Roberto Silva - ESSS Building Finite Element Meshes for Elliptical Cracks in Nozzles Welds Leandro Schiara - UFMG Planus João Carlos Lopes Efficiency Evaluation of Stress Relief Holes for Cracks in Offshore Structures Hulls Gilson Gomes da Silva - Petrobras Oil & Gas - CFD Andressa Ribeiro CFD Simulation of a Circulating Fluidized Bed Gasifier With Heat Transmission Marcelo Ricardo Q. Medeiros - Petrobras Modeling Salt Wall Dissolution Due to Flow in the Well-drilling Column Annular Channel using ANSYS Fluent João Aguirre - ESSS Use of Adaptive Mesh Simulation for Gaseous Effluent Dispersion Marcelo Rocha Martinelli - Petrobras Oil & Gas - CFD João Aguirre Flow Field Analysis to Improve a Liquid/Liquid Separator Vessel Design using CFD Rodrigo Peralta - Petrobras CFD Simulation of a Circulating Fluidized Bed Gasifier Cold Physical Model Marco Antonio Haikal Leite - Petrobras Creative Solutions Guilherme Tondello Numerical Simulation of a Rotary Dryer Using Granular Multiphase Model and Moving Mesh Raphael Bacchi - ESSS Electronics Juliano Mologni High Frequency Digital Connections using HFSS Software Platform Vanessa Przybylski Ribeiro Magri - PUC-RJ Transient Analysis of a Dual Polarization Log-periodic Antenna for Remote Sensing Applications Igor Feliciano da Costa - Inatel Electromagnetic Simulation of Open TEM Cell for Compatibility Testing Gustavo Maciulis Dip - ESSS Electronics Juliano Mologni Use of Ansoft Maxwell for Investigation of Electrostatic Properties of a Hemisphere on a Post Geometry Aimed to Model Vacuum Field Emission Devices Davi Sabbag Roveri - Unicamp Rotor-Stator Electromagnetic Radial Force and Shaft Deformation for a Hermetic Compressor Flavio Kalluf - Embraco RFID Tags Power Reduction Without Area Penalties Fernando Herrmann - SMDH EMC Simulation for Washing Machines Gerson Eguni - Whirlpool 17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Materials Michele Mendes Study of the Interface Effects on Glued Laminated Beams Subjected to Lateral-Torsional Buckling Alfonso Pappalardo Junior - Mackenzie Design of Multilayer Radar Absorbing Materials (RAM) by Evolutionary Optimization Rafael Jorge Port - CTA/IAE Integrating Materials Data Management with CAE using ANSYS Workbench as an Example Gustavo Olivella - Granta Design Marine & Offshore Eduardo Araujo Analysis and Design of a Flange Cover Using Fluid Structure Interaction Carlos Eduardo Reuther de Siqueira - Petrobras A Parametric Model of Evaluate the Stress in Mooring Lines Thiago Pontin Tancredi - USP Study of Composite Pressure Vessel using Workbench and APDL Eduardo Araujo - ESSS Structural Analysis of Pressure Vessel Fully Wrapped of Composites to Storage NGV Fernando F. M. C. de Guamá - FMC Technologies
MINI-SYMPOSIA uu April 24 Room OFFICE 1 Esterel Technologies Tony Karam / Bernard Dion 14:30 Systems and Embedded Software Engineering with SCADE Esterel Introduction and Operations in Latin America Systems and Embedded Software with SCADE Technical Presentation 15:30 REFRESHMENTS IN EXHIBITION AREA 16:00-17:50 Esterel Technologies Tony Karam / Bernard Dion Systems and Embedded Software Engineering with SCADE SCADE Technical Demo XMOBOT User Presentation (UAV Ground Control Station) with SCADE uu April 25 Room OFFICE 1 OFFICE 2 Mining Nicolas Spogis 14:30 The Key Rollplay of Simulation on Mining Processes & Equipment Design Hellinton Andrade - Business Director - Blue Ocean ESSS/Rocky (DEM) Advanced Applications - CFD Coupling and FEA Coupling Alex Potapov - Conveyor Dynamics Inc. 15:30 REFRESHMENTS IN EXHIBITION AREA 16:00-17:50 Mining Nicolas Spogis CAE Applied for Mining Industry - DEMO & Examples Nicolas Spogis - Business Manager - ESSS Multidisciplinary Optimization Rodrigo Ferraz Optimization of Complex Systems: Challenges on Aeronautical Industry Alexandre Antunes - MDO Team Coordinator - Embraer Multidisciplinary Optimization Rodrigo Ferraz Engineering Applications of Multidiscplinary Optimization Nader Fateh - VP Business Development - Esteco Multidisciplinary Systems Design Optimization (M.S.D.O.): The Next Frontier in the Technical Management of Complex Projects Sérgio Butkewitsch Choze - Director - WebSolvers
ESSS COMPUTATIONAL MODELING CHALLENGE: 2 nd edition ESSS and Electrolux are pleased to invite all conference participants to visit the poster session at the foyer (Piso E) on April 24 and 25, 2013. The challenge was created with the objective of promoting the exchange of ideas and experiences between academia and industry. In this 2 nd edition, ESSS will count with the important contribution of Electrolux do Brasil S.A., a multinational company which is global leader in household and professional use appliances and equipments. The competition consists of proposing an engineering problem solution through the use of computational simulation software provided by ESSS. uu CHALLENGE Winners ANNOUNCEMENT Winners will be announced at the end of the Plenary on Thursday, April 25, 2013. uu SPONSOR 2º DESAFIO ESSS DE MODELAGEM COMPUTACIONAL 2013
VENUE BOURBON ATIBAIA SPA RESORT Rod. Fernão Dias, s/n Km 37,5 - Atibaia - SP - Brazil Grande São Paulo: +55 (11) 4414 4700 Other Locations: 0800 703 40 41 www.bourbon.com.br SPECIAL RATES Special daily rate for 2013 ESSS Conference & ANSYS Users Meeting. Single Room: R$ 470,00 Double Room: R$ 580,00 BOOKING A limited number of rooms at reduced rates is being held for attendees. Please contact Valencia Agência de Viagens e Turismo Ltda. for more details. E-mail: silvana@valenciaturismo.com.br Phone: (11) 3111-2454 / (11) 9621-6875 Shuttle Service From Airports to the Hotel*: April 22 - under consulting April 23-7:00, 7:20 and 7:40h April 24-7:00, 7:20 and 7:40h April 25-7:00, 7:20 and 7:40h From Hotel to Airports*: April 23-18:00 April 24-18:00 and 20:00h April 25-18:30h *Price per Shuttle and Person: R$ 50,00 information and booking InformaTION AND REGISTRATION www.esss.com.br/usersmeeting E-mail: usersmeeting@esss.com.br São Paulo: +55 (11) 3046-5744 Rio de Janeiro: +55 (21) 3293 1300 Florianópolis: +55 (48) 3953 0000