2014 ESSS CONFERENCE & ANSYS USERS MEETING

Transcription

1 Caesar Business Faria Lima, São Paulo SP - Brazil May 19-21, 2014 FINAL PROGRAM Organization: Academic Challenge Support: Sponsors: Colombia Bogotá May, Argentina Buenos Aires May, 14 Peru Lima May, Chile Santiago May, 16 Brazil São Paulo May, 19-21

2 WELCOME THE EVENT The ESSS CONFERENCE & ANSYS USERS MEETING is the most traditional discussion forum for users of simulation software applied to product development in South America. During the course of three days, engineers, designers and researchers will have the opportunity to exchange ideas and experiences in Computer Aided Engineering (CAE) and to improve their engineering simulation skills through training courses, software update, plenary sessions, free workshops, user technical presentations, and ask the expert sessions. Join us and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce their product development cycle time. REGISTRATION Pre-Conference Training Courses Plenary Keynote Speakers Software Update Free Workshops 80+ User Technical Presentations Ask the Expert Academic Challenge

3 CONFERENCE AT-A-GLANCE uu May 19 uu May 20 uu May 21 8:00 REGISTRATION OPEN 8:30 TRAINING COURSES 8:00 REGISTRATION OPEN 8:30 FREE WORKSHOPS 8:00 REGISTRATION OPEN 8:30 FREE WORKSHOPS 10:00 REFRESHMENTS IN EXHIBITION AREA 10:30 TRAINING COURSES 12:00 LUNCH 13:00 TRAINING COURSES 9:30 SOFTWARE UPDATE 10:30 REFRESHMENTS IN EXHIBITION AREA 11:00 OPENING SESSION 11:10 Alvaro Toubes Prata - Ministério da Ciência, Tecnologia e Inovação MCTI National Secretary of Technological Development and Innovation 11:40 Ravi Kumar - ANSYS, Inc. Regional Sales Director 12:10 Álvaro Maia da Costa - PETROBRAS Technical Advisor to the Presidency 12:50 LUNCH 9:30 SOFTWARE UPDATE 10:10 REFRESHMENTS IN EXHIBITION AREA 10:40 Pablo Filgueira Rodeiro - Whirlpool S.A. Global Manager, Simulation Based Design 11:05 Rodrigo Tasca - ESSS Account Manager 11:45 Evandro S. Nogueira - Ministério da Ciência, Tecnologia e Inovação MCTI Army Major - Coordination of Sensitive Goods 12:10 Corrado Groth - RBF Morph Technical Manager 12:25 ESSS / ANSYS Customer Portal 12:35 ESSS ACADEMIC CHALLENGE AWARD 12:50 LUNCH 14:30 TECHNICAL SESSIONS 14:30 TECHNICAL SESSIONS 15:30 REFRESHMENTS IN EXHIBITION AREA 16:00 TRAINING COURSES 15:50 REFRESHMENTS IN EXHIBITION AREA 16:20 TECHNICAL SESSIONS 15:50 REFRESHMENTS IN EXHIBITION AREA 16:20 TECHNICAL SESSIONS 17:30 END OF 1 st DAY 17:40 ASK THE EXPERT 18:10 CONFERENCE SOCIAL (COCKTAIL) 17:20 ASK THE EXPERT 17:50 CLOSING SESSION (EACH ROOM)

4 PLENARY SESSION uu May 20 uu May 21 Room FARIA LIMA 2 Room FARIA LIMA 2 11:00 OPENING SESSION Clovis Maliska Jr. - ESSS President 10:40 Pablo Filgueira Rodeiro - Whirlpool S.A. Global Manager, Simulation Based Design Driving Product Development with CAE at Whirlpool Corporation A Knowledge Perspective 11:10 Alvaro Toubes Prata - Ministério da Ciência, Tecnologia e Inovação MCTI National Secretary of Technological Development and Innovation 11:05 Rodrigo Tasca - ESSS Account Manager Challenges and opportunities for Technological Development and innovation in Brazil Productivity Enabling Simulation Driven Product Development - ESSS 11:40 Ravi Kumar - ANSYS, Inc. Regional Sales Director Predict with Confidence utilizing Comprehensive Solution Practices 11:45 Evandro S. Nogueira - Ministério da Ciência, Tecnologia e Inovação MCTI Army Major - Coordination of Sensitive Goods Brazilian Outreach Programme (PRONABENS) for the industry and the applications of CAE Tools on the Implementation of the CWC (Chemical Weapons Convention) in Brazil under the Article X for Assistance and Protection purposes 12:10 Álvaro Maia da Costa - PETROBRAS Technical Advisor to the Presidency Overcoming the Challenge of the Salt 12:10 Corrado Groth - RBF Morph Technical Manager RBF Morph Software - How to Reshape the CAE Workflows by Radial Basis Functions Mesh Morphing 12:25 ESSS / ANSYS Customer Portal 12:35 ESSS ACADEMIC CHALLENGE AWARD

5 TRAINING COURSES uu May 19 8:30-17:30 Venue Room CAESAR BUSINESS FARIA LIMA SÃO PAULO 4 Combustion Modeling using ANSYS FLUENT Gas Combustion,; 2. Detailed Chemistry; 3. Surface Chemistry; 4. Pollutant Formation; 5. DPM, Spray, Solid Combustion 6. LES/Gas Turbine Applications. Instructor: Stefano Orsino, ANSYS, Inc. CAESAR BUSINESS FARIA LIMA SÃO PAULO 5 Turbomachinery Flow Modeling using ANSYS CFX Modelling Single Frame of Reference (SFR); 2. Modelling Multiple Frames of Reference (MFR); 3. Pre-processing using ANSYS Turbo-Pre; 4. Advanced modelling for transient turbomachinery simulations; 5. Post-processing using ANSYS Turbo-Post. Instructor: Bruno Contessi, ESSS CAESAR BUSINESS FARIA LIMA SÃO PAULO 6 Analysis and Design of Electromechanical Systems 1. Introduction to Electromechanical Systems: The Integration of Magnetic Components with Drives; 2. Detailed Component Design and Analysis using Computational Electromagnetics: Electric Machine Design; Transformer Design; Advanced Core Loss Capability; Consideration of Temporal and Spatial Harmonics. 3. Multiphysics approach to Electric Machine & Transformer Design: Thermal Considerations; User defined output and Motor Design Kit; NVH - Acoustic Noise Demo. 4. Power Electronics Design for Drive Systems - a Multi- Scale Approach: Device Characterization of IGBT, Power MOSFET and Power Diode; Equation Based Characterization; Switch Level Models. 5. Advanced System Level Simulation Leveraging the Power of Reduced Order Models (ROMs): System Level ROMs Extracted from Computational Electromagnetics for Motors/Generators and Transformers; System Level ROMs Extracted from Computational Fluid Dynamics; System Level ROMs Extracted from Computational Mechanics. Instructor: Scott Stanton, ANSYS, Inc. CAESAR BUSINESS FARIA LIMA SÃO PAULO 7 Composite Materials Modeling using ANSYS Mechanical 15.0 and ACP 1. Composite Introduction; 2. ANSYS Composite PrepPost Workflow; 3. ANSYS Composite PrepPost Integration in ANSYS Workbench; 4. Rosettes; 5. The Oriented Element Sets; 6. Draping; 7. Solid Modeling; 8. Parameters in ANSYS Composite PrepPost; 9. Failure Criteria; 10. Progressive Failure and Crack Growth Analyses. Instructor: Eduardo Francisco Rocha de Araujo, ESSS

6 TRAINING COURSES uu May 19 8:30-17:30 Venue Room CAESAR BUSINESS FARIA LIMA SÃO PAULO 8 Structural Simulation with ANSYS New Features and Integration Workbench-APDL 1. New Contact Features; 2. Bolt Joint Contact; 3. Contact Debonding and Interface Delamination for Composites; 4. Shell-to-Solid Submodeling; 5. Mesh Import in ANSYS Workbench; 6. Model Assembly; 7. APDL Programming Features in Workbench Interface. Instructor: Roberto Silva, ESSS ESSS SP 1 Electromagnetic Analysis of Electronic Products 1. Introduction to the concept of full wave electromagnetic analysis; 2. Importing MCAD geometries; 3. Boundaries and excitations setup for RF applications; 4. Electromagnetic extraction; 5. How to create near and far field plots; 6. Electric and magnetic fields plot; 7. Comparison between simulation and measurements from local customers; 8. Beam scanning antenna simulation; 9. Optimization of the beam scanning antenna to comply with Anatel Resolution 610; 10. Design and optimization of an impedance match circuit for a dipole antenna; 11. Signal integrity analysis of serial channels of a print circuit board; 12. Near field, EMI and radiated emissions from a print circuit board. Instructor: Juliano Fujioka Mologni, ESSS ESSS SP 2 Assessing Design Robustness and Reliability using Optimization Techniques 1. Introduction: What is a robust design? Statistical Moments; Probability density function and Cumulative distribution function. 2. Sampling Methodologies and Polynomial Chaos: Monte Carlo Random sampling; Latin Hypercube sampling; Polynomial Chaos.; 3. Robust Design Optimization: Expected value vs Uncertainty; Dominance Criteria and Pareto Design; Reverse Multi-Objective Robust Design Optimization; Hands on Example. 4. Reliability-Based Optimization: Reliability Introduction; Percentil estimation based on Polynomial Chaos; Hands on Examples; Instructor: Guilherme Jenovencio, ESSS

7 FREE WORKSHOPS uu May 20 8:30-9:00 Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 Structural Mechanics: Bolt Modeling in R15.0 Fluid Dynamics: Pre-processing using Electromechanical: Harmonic Stress Modeling SpaceClaim and Acoustic Noise in Electric Motors HF Electromagnetics: Optimization of the beam scanning antenna to comply with ANATEL Resolution 610/2013 modefrontier: Making web-based optimization real Instructor: Fabiano Nunes, ESSS Instructor: Leon White Nogueira, ESSS Instructor: Scott Stanton, ANSYS, Inc. Instructor: Juliano Fujioka Mologni, ESSS Instructor: Matteo Nicolich, Esteco 9:00-9:30 Structural Mechanics: What s new related to Fracture Mechanics in R15.0 RBF Morph: A simple set-up for complex workflows HF Electromagnetics: New Features of ANSYS HFSS 2014 An introduction to Topology Optimization Method focused on Mechanical Engineering Instructor: Eduardo Araújo, ESSS Instructor: Corrado Groth, RBF Morph Instructor: Juliano Fujioka Mologni, ESSS Instructor: Eduardo Simões / Valmir Fleischmann, VirtualCAE uu May 21 8:30-9:00 Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 Structural Mechanics: Beam Elements Analysis Fluid Dynamics: Combustion Modeling - Finite- ANSYS Customization Tool Kit: Customizations SpaceClaim: Create Clean Geometry for Rate x LFM Approaches based on ACT Analysis from Structural Optimization Outputs Instructor: Thiago Lopes, ESSS Instructor: Raphael David Bachi, ESSS Instructor: Luiz Lima, ESSS Instructor: Roman Walsh, SpaceClaim VCollab: Reduce, Visualize, Mine & Share ANSYS Data Instructor: Prasad Mandava, VCollab 9:00-9:30 Structural Mechanics: Workflow Enhancements in ANSYS Workbench R15.0 Instructor: Roberto Silva, ESSS ANSYS EKM: New Features R Remote Visualization & Job Templates Instructor: Vinicius Strugata Ambrosio, ESSS

8 SOFTWARE UPDATE uu May 20 Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 9:30-10:30 ANSYS Structural Mechanics Update ANSYS Fluid Dynamics Update ANSYS Electromagnetics Update Esterel: Embedded Systems and Software Engineering with Complete Virtual Prototyping modefrontier Update and ESTECO Enterprise Solutions Tim Pawlak ANSYS, Inc. Stefano Orsino ANSYS, Inc. Scott Stanton ANSYS, Inc. Tony Karam ESTEREL-Technologies Matteo Nicolich ESTECO uu May 21 Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 6 SÃO PAULO 7 9:30-10:10 ANSYS Workbench Update ANSYS Reacting Flow Update: CFD & Reaction Design Ensight: FEA & CFD Post-processing Rocky Tim Pawlak ANSYS, Inc. Stefano Orsino ANSYS, Inc. Martin Faber CEI Alexander Potapov GDI

9 USER TECHNICAL SESSIONS uu May 20 Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 SÃO PAULO 8 Chairman Germano Gavarrão Fabiano Diesel Karolline Ropelato Fabio Kurokawa Giuseppe Mirlisenna Juliano Mologni 14:30 A Procedure to Integrate AQWA with FriendShip for the Application of Optimization Techniques in PSV Vessels Design Miguel Altimari Perdigão Pelia - POLI-USP 14:50 Hydrodynamics of the Flow Around an Underwater Pipeline with the Use of CFD Diener Volpin Ribeiro Fontoura - UNICAMP 15:10 A Numerical Study of Towing Tank Resistance Hydrodynamic Experiments for Submerged Bodies João Lucas Dozzi Dantas - IPT 15:30 CFD Water on Deck Simulations for FPSOs Daniel Fonseca - PETROBRAS Use of FEA to Improve the Design of Suspension Springs for Reciprocating Compressor Mattias Castro - Embraco S.A. / Fabiano Diesel - ESSS Investigation of the Discharge Port Position of Hermetic Compressors Jonatas Ferreira Lacerda - TPC Taking Advantage of DesignXplorer in Ideation Stage Cassiano Antunes Cezario - WEG Numerical Evaluation for Channel Position in a Helical Oil Pump Applied on Reciprocating Compressors Mauricio Pereira Tada - Embraco S.A. / Martin Kessler - ESSS FEM-based Modeling, Simulation and Calibration of Hydraulic Fracturing for Oil and Gas Applications Johannes Will - DYNARDO GmbH A Methodology for Determining the Rotordynamics Coefficients of a Hybrid Seal by CFD Letícia de Rezende Tapajoz - PETROBRAS Effect of Nozzles Design and Configuration on Catalyst and Gas Homegenization in FCC Riser Daniel Cicero Pelissari - UNICAMP/ PETROBRAS Experimental and Numerical Vortex Induced Vibration Analysis in a Horizontal Pipe Patrick Farias - FMC FSI - Special Impeller for Agitators Alexandre Sampaio - Semco ANSYS Mechanical Coupling Control in FSI Simulations to Reduce Computational Time Tadeu Tonheiro Rodrigues - Embraco S.A. / Bruno Contessi - ESSS Hydraulic Fracturing Modelling in a Multilayer Reservoir through FEM Pedro Cheroto - ESSS FSI Analysis of Plate Heat Exchangers Rafael Sanches Rangel - PETROBRAS Verifying the Influence of Modifying the Geometry Parameters in a Typical Pump s Impeller from an ESP System Ana Carla Costa Andrade - Universidade Federal RN Geometry prep for turbomachinery Roman Walsh - SpaceClaim Development of a Semi-Axial Pump through CFD Ismael Nicholas Schröer - Higra CFD Modeling of a Stirred Tank Heated by Helical Coils to Obtain the Nusselt Equation Ronald Jaimes Prada - UNICAMP 15:50 REFRESHMENTS IN EXHIBITION AREA Chairman Armando Souza Roberto Silva Daniel Boniatti Luiz Lima Eduardo Araújo Ricardo Barros 16:20 Radar Cross Section and Antenna Co-Site in Aircrafts Juliano Mologni - ESSS Explicit Simulations of Ceramic Materials With Ballistic Applications Guilherme Pinto Guimarães - CTEx Pre-certification of ROPS for Agricultural Tractors through CAE Technology Igor Saveljevas Rodrigues - VirtualCAE Finite Element Analysis for Structural Reinforcement in Concrete Railway Bridges Carlos Alberto Medeiros - UMC Crack Propagation Simulation by ANSYS Under Constant Amplitude Loading and Correlation with Experimental Data Luiz Carlos H. Ricardo - Ipen Reconfigurable Resonator for RFID Chipless Tag Andreia Ap. de Castro Alves - UNICAMP Optically Controlled Adaptive Antenna for ISM Bands and Tri-band Slotted Waveguide Antenna Array for Millimetric-waves Applications Igor Feliciano Costa - Inatel / UNIFEI Multi-scale Based Electric Drive System Simulation Lucas Kostetzer - Esterel-Technologies/ESSS Analysis of the Electric Field in the Vicinity of a Metal Vacuum Dielectric Triple Junction by the Use of the Software MAXWELL-ANSYS Guilherme Mauad Sant Anna - UNICAMP Particle Deposition During Breath Holding and Exhalation Using Computational Fluid Dynamics (CFD) Liliana de Luca Xavier Augusto - UFSCar 16:40 Complete Avionics System Simulation Tony Karam - Esterel-Technologies The GTN Damage Model Application on Mechanical Conformation Process Eduardo Luís Gaertner - Embraco S.A. / Fabiano Diesel - ESSS Numerical and Experimental Study of Constitutive Models for Plasticity Representation in Cases with Statics Loads Róbinson João Jabuonski Júnior - Stara S.A. Thermoviscoelastic Model with Ageing for Mass Concrete Flavio Mamede - Furnas Supporting ANSYS Workbench with Valid and Traceable Materials Property Models Gustavo Olivella - Granta Design Fluid Structure Interaction Analysis in Abdominal Aortic Aneurysm Antonio Braulio Neto - POLI-USP 17:00 Advanced Techniques for Electromechanical Design and Analysis Using a Combined Finite Element Method and System Simulation Scott Stanton - ANSYS, Inc. Leveraging SGI s UV and VizServer Platform to Enable Multiple CAE Users to Run ANSYS Software with Remote Visualization in a Data Center Everton Paulino - SGI Validation of Filtered Two-fluid Models for Gas Particle Flows in Bubbling Fluidized Beds Stefano Orsino - ANSYS, Inc. Increasing Performance with IBM Platform Computing Marcos Pitanga - IBM How your Technical Cloud Can Transform Engineering into a Powerful, Mobile and Collaborative Experience Andrea Rodolico - Nice HP Workstations Portfolio Augusto Rosa - Planus 17:20 DOP Ballistic Investigations with Explicit Analyzes Guilherme Pinto Guimarães - CTEx Topology Optimization Method Considering a Consistent Manufacturing Constraints using ANSYS Leandro Garbin - VirtualCAE Monitoring and 3D Thermal Modeling of the Spiral Casing of Batalha Hydroeletric Power Plant since its Early Ages Flavio Mamede - Furnas Distortions Caused by the Welding Process: Comparative Evaluation Using Finite Element Analysis and Experimental Assessment Rafael Vetturazzi - UCS/ESSS Hunting Hot Spots on a Hearing Aid Low Power Project Paulo Roberto Bueno de Carvalho - Design House -LSITEC 17:40 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert

10 USER TECHNICAL SESSIONS uu May 21 Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 SÃO PAULO 8 Chairman Ismael Daoud Bruno Contessi Carlos Fontes Roberto Silva Silvio Alano Cesareo Siqueira 14:30 A Response Surface Model to Predict Flammable Gas Cloud Volume in Offshore Modules Tatiele Dalfior Ferreira - UNICAMP 14:50 Basic Engineering Design of Flares on oil Plataforms Using Computational Fluid Dynamics Mauro Cresta de Barros Dolinsky - PETROBRAS/CENPES 15:10 CFD Modeling on Gas Dispersion for Developing Response Curves Carolina Marion de Godoy - UNICAMP 15:30 Modeling Gas Dispersion and the Behavior of the Plume as a Function of the Leakage Karolline Ropelato - ESSS Thermal-Mechanical Analysis for the new Brazilian Synchrotron Light Source (Sirius) using ANSYS Workbench Thiago Mendes da Rocha - Lab. Nacional de Luz Sincrotron Applying ANSYS/Fluent in the Teaching of Natural Convection Thiago Antonini Alves - UTFPR Using the Extension Library (ACT) to Perform a Modal Optimization in the Workbench Environment Marcelo Verardi - WEG Multiphase Simulation of a Pumping Module Bruno Alexandre Contessi - PETROBRAS/ESSS Bagasse Swirl Burner Design Explained by CFD Daniel José de Oliveira Ferreira - USP Development of Methodology for Fluid Dynamics and Heat Transfer Study in a Spray Wash Section of Coker Fractionator Mariana Dantas - PETROBRAS/ESSS Methodology of a Cool Down Analysis for Three Phase Separators Patrick Farias - FMC Technologies / Thiago Ribeiro - ESSS CFD Analysis of a Distillation Sieve Tray of the Ethanol Industry Gladson de Oliveira - UFSCar Fitness for Service Assessment of a Storage Tank Hervandil Santanna - PETROBRAS Internal Sealing Performance of a Hydrotreating High Pressure Heat Exchanger Rafael Pavan Bagagli - PETROBRAS Flanges Stiffness Determination on Prestressed Bolted Connections and its Validation by Finite Element Analysis Carlos Eduardo Ribeiro de Camargo Nogueira - USP Analysis of Repairs in Metal-Composite in the Oil Industry Carlos Eduardo Reuther de Siqueira - PETROBRAS Structural Behavior of a Semi-Trailer Chassis Subjected to Lateral and Vertical Dynamic Maneuvers Leandro Garbin - Guerra / VirtualCAE An Improvement Study of a Ejector Panel for the 2013 Garbage Fábio Carlos Cavalcanti - Librelato Implementos Rodoviários S/A Understanding the Durability of Your Design Eduardo Araujo - ESSS Simplification of Tridem Suspension for Transient Analysis of Trailer Chassis Vinicius de Almeida Lima - VirtualCAE 15:50 REFRESHMENTS IN EXHIBITION AREA Chairman Nicolas Spogis Giuseppe Mirlisenna Armando Souza Eduardo Araújo Rodrigo Ferraz Fabio Kurokawa 16:20 New Hopper System for Re-Screening Plant Ueld da Nóbrega - Vale 16:40 Granular Flow of Particles Submitted to Pressurized Air Injection Marcelo José Alba - Universidade Tecnológica Federal - PR 17:00 Analysis of the Structure of a Conveyor Belt to Determine the Root Cause of its Failure with the Use of Computer Simulation Luiz Otavio Rocha Peres - Usiminas ANSYS Technical Presentation Tim Pawlak - ANSYS, Inc. Computational Simulation of a Bag House Filter for Steel Industry Carlos Fontes - Gerdau/ESSS Simulation of a Novel Assisted Toolholder for Precision Machining Laercio Junior - UTFPR-PG Comparison between Commercial and Free Numerical Codes in Simulations of Coal Combustion in Fluidized Beds: Fluent vs Mfix Cleiton Elsner da Fonseca - Unisinos Numerical Evaluation of Natural Convection in Evacuated Tube Solar Collector Marcelo Dalla - UFRGS Numerical Simulation to Study the Vortices Formation in Water Intakes at Hydroelectrics Sérgio Leonardo Neves - Unisinos Computer Simulation Analysis of Material used in Compressed Air Tank Leonardo Camilo dos Reis - USIMINAS Introducing Residual Stresses in FEM through INISTATE Command Paulo Rogério Franquetto - CT da Marinha em São Paulo Modeling of Heat Source Welding with Multiple Pass and Evaluation of Thermal Behavior Thiago Lopes - ESSS Hydrodynamic Shape Optimization of Semisubmersibles with Seakeeping Criteria Evaluated with Neural Network Response Surface Felipe Carvalho dos Santos - POLI-USP Wind Power Unit Collaborative Multidisciplinary Optimization at Airworks Matteo Nicolich - ESTECO A Procedure to Automatic Design of Structures using ANSYS APDL Coupled with modefrontier Bruno Pegoraro - USP 17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Imperfections Influence in the Structural Resistance of Submarines Thiago Pontin Tancredi - USP The Influence of Non-uniform Velocity Profile at the Inlet of a Cyclone Karolline Ropelato - ESSS Numerical Evaluation of the Effective Width in Structures Built by Plates with Orthogonal Stiffeners: Comparison with Analytical Solutions Bruno Pegoraro - USP FEM Modelling of the Torpedo Anchor Penetration in the Seabed Pedro Cheroto - ESSS Numerical Analysis of the Aerospace Vehicle 14-X B at Mach Number 7 Alexandre Kazuo Carvalhal - Instituto de Estudos Avançados - CTA Numerical Investigation to Identify Modal Parameters Considering Fiber Orientation of Flexible Composite Wing Models Eduardo Francisco Rocha de Araujo - ESSS Preliminary Numerical Simulation of the Brazilian 14-X B Hypersonic Scramjet at Mach Number 7 Felipe Jean da Costa - Instituto de Estudos Avançados - CTA

11 ESSS COMPUTATIONAL MODELING CHALLENGE: 3 rd EDITION ESSS and Eletrobras Cepel are pleased to invite all conference participants to visit the poster session at the foyer on May 20 and 21, The challenge was created with the objective to promote the exchange of ideas and experiences between academia and industry. In this 3 rd edition, ESSS will count with the contribution of the Electric Power Research Center (Cepel-Eletrobras), considered the greatest research center on electric power of the Southern Hemisphere. The competition consists of proposing an engineering problem solution through the use of computational simulation software provided by ESSS. uu CHALLENGE WINNERS ANNOUNCEMENT Winners will be announced at the end of the Plenary Session on Wednesday May 21, uu SUPPORT 3 ESSS COMPUTATIONAL rd MODELING CHALLENGE 2014

12 SOUTH AMERICA REGIONAL SERIES IN NUMBERS The South America Regional Series will be held in Brazil, Argentina, Chile, Peru and Colombia. At the end of this conference series, more than 150 companies, universities, and R&D Centers will present a total of 150 user technical papers to approximately 600 attendees in South America. Colombia Bogotá May Argentina Buenos Aires May 14 Peru Lima May Chile Santiago May 16 Brazil São Paulo May TECHNICAL PAPERS COMPANIES ATTENDANCE UNIVERSITIES / R&D CENTERS ATTENDANCE EXPECTED NUMBER OF ATTENDEES

13 VENUE CAESAR BUSINESS FARIA LIMA Rua Olimpíadas, São Paulo - SP - Brazil Phone Number: +55 (11) RATES Daily rate for 2014 ESSS Conference & ANSYS Users Meeting. Phone Number: +55 (11) Single Room: R$ 486,00 (+ 5%) Double Room: R$544,00 (+5%) For another options of Hotels in the region, please contact Valencia Agência de Viagens e Turismo Ltda. silvana@valenciaturismo.com.br Phone: (11) / (11) Strategically located in the city s new business hub, the Vila Olímpia, which is considered to be an important commercial and financial center, and home to major companies. The hotel is situated less than 10 minutes from the airport and from Ibirapuera park and is very close to excellent bars and restaurants, prestigious international stores and the city s best entertainment venues. Airports GUARULHOS (36.50 km / mi) CONGONHAS (5.50 km / 3.42 mi) MORE INFORMATION INFORMATION AND REGISTRATION usersmeeting@esss.com.br São Paulo: +55 (11) Rio de Janeiro: +55 (21) Florianópolis: +55 (48)