ARC WELDING ACCESSORIES WELDING CABLE MARIGASES WELDING CABLE is black neoprene sheathed cable, with high flexibility and copper conductor. Highly resistant to oil, water, flame and abrasion. It is available in cross section areas 50 and 70mm². WELDING CABLE 50mm² (400A) Order number: 332566 WELDING CABLE 70mm² (500A) Order number: 332567 CABLE CONNECTORS MARIGASES CABLE CONNECTORS ensure good electrical conductivity and are suitable for use with either copper or aluminium cable, providing a quick, watertight fitting of cables on sight. Two methods of cable fixing are available, either by grub screws and copper ferrule or by a gland pressure nut retaining the cable against a machined cone. CABLE CONNECTOR MALE 35 50mm² Order number: 332511 CABLE CONNECTOR FEMALE 35 50mm² Order number: 332512 CABLE CONNECTOR MALE 50 70mm² Order number: 332513 332511 332512 CABLE CONNECTOR FEMALE 50 70mm² Order number: 332514 Special safety connectors are also available. They are recommended for use under the toughest conditions. Capacity: 500A Cable size: up to 70mm² SAFETY CABLE CONNECTORS MALE/FEMALE Order number: 332630 332630
GASES DIVISION ELECTRODE HOLDERS & GROUND CLAMPS MARIGASES ELECTRODE HOLDERS have a D section, knurled handle providing a firm grip and good balance. Designed to withstand heat, with shielded spring to prevent damage from spatter and fixing by means of a bolt. ELECTRODE HOLDER 400A Order number: 332515 ELECTRODE HOLDER 600A Order number: 332559 ELECTRODE HOLDER SAFETY TYPE Order number: 332636 GROUND CLAMP Order number: 332648 332636 332648 FACE SHIELDS MARIGASES offers two types of FACE SHIELDS, for full protection of the welder. Both of them are made of a light, quality resistant plastic material. The shield with adjustable headband is a full face protection accessory, appropriate for all welding jobs. The face shield with handle, guarantees full protection of the hand holding it. Both shields are equipped with two high quality glasses, a plain and a colored one. All the glasses comply with the DIN standard. FACE SHIELD WITH HANDLE Order number: 332517 FACE SHIELD WITH ADJUSTABLE HEAD BAND Order number: 332516 FACE SHIELD AUTOVISION TYPE 90 x 110 Order number: 332647 SPARE LENSES There are available plain and colored spare lenses. They are 90 x 110 mm and are manufactured according to the DIN standard. These high visibility glasses are available in 9 13 DIN standards. SPARE LENS 90 x 110mm DARK Order number: 332520 SPARE LENS 90 x 110mm CLEAR Order number: 332521 332517 332516 332647 Section C, Part 2
PROTECTIVE CLOTHING MARIGASES PROTECTIVE CLOTHING is made from specially treated soft leather to ensure maximum safety and comfort. They provide full protection against heat, falling sparks and slag, under the toughest conditions. 332518 WELDING GLOVES LEATHER Order number: 332518 WELDING APRON LEATHER Order number: 332519 SPATS (LEGGING) LEATHER Order number: 332570 WELDER S PROTECTIVE SLEEVES Order number: 332712 332712 332570 332519 WIRE BRUSH Order number: 332522 Ideal for cleaning before welding and also de slagging. 332522 CHIPPING HAMMER Order number: 332523 All steel with spring taper handle, hard forged head and bright plated finish. HEATED ELECTRODE QUIVERS Order number: 332711 For storage of electrode in dry heated environment until the moment of use. Two models are available, 110V or 240V both operating from either an A.C. or D.C. supply and are complete with power supply lead and plug. Capacity: 7.3kg (20lbs) weight of electrodes Max. electrode length: 450mm Temp. Range: 110 C operating at 110V Rating: 150W 332523 332711
GASES DIVISION TIG WELDING EQUIPMENT PARTS & CONSUMABLES High quality TIG TORCHES suitable for every type of MARIGASES ARC WELDING MACHINES are offered. Also, parts and TIG electrodes for the TORCHES are available, in order to satisfy the necessities of TIG WELDING. TIG TORCHES SR17V 4m for MARIGASES 14/16 complete order number: 332911 SR17V 8m for MARIGASES 14/16 complete order number: 332912 SR17A 4m for MARIGASES 16L/16HF complete order number: 332913 SR17A 8m for MARIGASES 16L/16HF complete order number: 332914 SR26V 4m for MARIGASES 35 complete order number: 332915 SR26V 8m for MARIGASES 35 complete order number: 332916 TIG WELDING PARTS & CONSUMABLES CERAMIC GAS NOZZLE, 47mm short order number: 332921 ELECTRODE HOLDER MOUNT 1.6mm order number: 332932 ELECTRODE HOLDER MOUNT 2.4mm order number: 332933 ELECTRODE HOLDER MOUNT 3.2mm order number: 332934 ELECTRODE HOLDER 1.6mm order number: 332942 ELECTRODE HOLDER 2.4mm order number: 332943 ELECTRODE HOLDER 3.2mm order number: 332944 WOLFRAM ELECTRODE 1.6mm order number: 332952 WOLFRAM ELECTRODE 2.4mm order number: 332953 WOLFRAM ELECTRODE 3.2mm order number: 332954 LONG CAP order number: 332926 SHORT CAP order number: 332927 Section C, Part 2
ARC WELDING CABINET ARC WELDING CABINET is a complete store for all popular types and diameters of MARIGASES arc welding electrodes (MGPO, MGPR, MLH, MLV, MTENSILE, MSS 18/8, MNiFe, MNICKEL). It is suitable for new shipbuildings but can be adapted into existing vessels as well. Additionally, MARIGASES offers specific enquiries or specialized design requirements. Consult our service engineers for details. Dimensions: 600mm x 600mm x 400mm Order Number: 333051 Full Order Number: 333052 Empty Each Cabinet includes the following electrodes: TYPE DIAMETER (mm) BOXES KG / BOX MGPO 2.6 2 5 MGPO 3.2 2 5 MGPO 4.0 2 5 MSPECIAL 3.2 2 5 MDUPLEX 3.2 2 2 MLH 2.6 1 5 MLH 4.0 1 5 MLHV 3.2 1 5 MLHV 4.0 1 5 MTENSILE 3.2 1 5 MSS 18/8 2.6 1 5 MSS 18/8 3.2 1 5 MNiFe 3.2 1 2 MNICKEL 3.2 1 2