CA Change Manager Enterprise Workbench r12 Database Support for Microsoft SQL Server 2008
This documentation and any related computer software help programs (hereinafter referred to as the "Documentation") are for your informational purposes only and are subject to change or withdrawal by CA at any time. This Documentation may not be copied, transferred, reproduced, disclosed, modified or duplicated, in whole or in part, without the prior written consent of CA. This Documentation is confidential and proprietary information of CA and may not be used or disclosed by you except as may be permitted in a separate confidentiality agreement between you and CA. Notwithstanding the foregoing, if you are a licensed user of the software product(s) addressed in the Documentation, you may print a reasonable number of copies of the Documentation for internal use by you and your employees in connection with that software, provided that all CA copyright notices and legends are affixed to each reproduced copy. The right to print copies of the Documentation is limited to the period during which the applicable license for such software remains in full force and effect. Should the license terminate for any reason, it is your responsibility to certify in writing to CA that all copies and partial copies of the Documentation have been returned to CA or destroyed. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CA PROVIDES THIS DOCUMENTATION "AS IS" WITHOUT WARRANTY OF ANY KIND, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT WILL CA BE LIABLE TO THE END USER OR ANY THIRD PARTY FOR ANY LOSS OR DAMAGE, DIRECT OR INDIRECT, FROM THE USE OF THIS DOCUMENTATION, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST INVESTMENT, BUSINESS INTERRUPTION, GOODWILL, OR LOST DATA, EVEN IF CA IS EXPRESSLY ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH LOSS OR DAMAGE. The use of any software product referenced in the Documentation is governed by the applicable license agreement and is not modified in any way by the terms of this notice. The manufacturer of this Documentation is CA. Provided with "Restricted Rights." Use, duplication or disclosure by the United States Government is subject to the restrictions set forth in FAR Sections 12.212, 52.227-14, and 52.227-19(c)(1) - (2) and DFARS Section 252.227-7014(b)(3), as applicable, or their successors. Copyright 2010 CA. All rights reserved. All trademarks, trade names, service marks, and logos referenced herein belong to their respective companies.
Contact CA Contact Technical Support For your convenience, CA provides one site where you can access the information you need for your Home Office, Small Business, and Enterprise CA products. At http://ca.com/support, you can access the following: Online and telephone contact information for technical assistance and customer services Information about user communities and forums Product and documentation downloads CA Support policies and guidelines Other helpful resources appropriate for your product Provide Feedback If you have comments or questions about CA product documentation, you can send a message to techpubs@ca.com. If you would like to provide feedback about CA product documentation, complete our short customer survey, which is also available on the CA Support website, found at http://ca.com/docs.
Contents Chapter 1: Database Support for Microsoft SQL Server 2008 7 Changing to SQL Server 2008 for an Existing Installation... 7 Performing a New Installation with SQL Server 2008... 8 Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool... 10 Contents 5
Chapter 1: Database Support for Microsoft SQL Server 2008 This section contains the following topics: Changing to SQL Server 2008 for an Existing Installation (see page 7) Performing a New Installation with SQL Server 2008 (see page 8) Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool (see page 10) Changing to SQL Server 2008 for an Existing Installation To install SQL Server 2008 support for an existing installation of CA CM Enterprise Workbench, execute these steps: 1. Perform the DB installation described in the section Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool (see page 10). 2. Copy the JDBC driver for SQL Server 2008 into the following CMEW folder: %EW_HOME%\ew\WEB-INF\lib Choose one of the following drivers, depending on the JRE version: For JRE releases up to 1.5, use: sqljdbc.jar For JRE releases 1.6 and above, use: sqljdbc4.jar 3. Run the Define Data Source & Deployment Tool from Start, Programs, CA, CM Enterprise Workbench, Setup Utilities. Change the Database configuration files, if necessary (for example, if the server name or the CMEW user ID or password has been changed, and so on) and deploy the application. Note: If you want to migrate your data from a previous version of SQL Server, you need to use the tools provided by Microsoft to convert the older version of SQL Server to 2008. If you experience any problems during the conversion, please contact Microsoft for support. Chapter 1: Database Support for Microsoft SQL Server 2008 7
Performing a New Installation with SQL Server 2008 Performing a New Installation with SQL Server 2008 To install CA CM Enterprise Workbench with SQL Server 2008, perform the following step. Note: Anytime you see SQL Server 2005 during the installation, consider it as the same as SQL Server 2008, since these two versions do not differ in the configuration done by the CM Enterprise Workbench installation. 1. Perform the DB installation described in the section Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Tool (see page 10). You should note the DB user password specified during this installation in panel Database Configuration Information, because you will need it later. 2. Perform the Custom installation of the product as described in the CA Change Manager Enterprise Workbench Implementation Guide, with the following two exceptions: a. In the Select Features screen do not select the Database Support installation, because it will be done after the CA CM Enterprise Workbench installation process using the Enterprise Workbench DB Tool. As shown in the following panel, do not select the Database Support options. 8 Database Support for Microsoft SQL Server 2008
Performing a New Installation with SQL Server 2008 Enter the DB user password you have noted earlier in the Database User Password field on the CA CM Enterprise Workbench Data Source screen. At the end of the installation, when the Define Data Source & Deployment tool will be run, and before the deployment, copy the jdbc driver for SQL Server 2008 into CMEW folder: %EW_HOME%\ew\WEB-INF\lib Choose one of the following drivers, depending on the JRE version: for JRE up to 1.5, sqljdbc.jar should be used. for JRE 1.6 and up, sqljdbc4.jar should be used. Chapter 1: Database Support for Microsoft SQL Server 2008 9
Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool To install the database support for SQL Server 2008, complete the following steps: 1. Copy the file MSSQL_DBsupport\bin\Enterprise Workbench DB Setup Tool.exe to the folder %EW_HOME%\bin. The setup tool is now available for use. If a previous version of the tool existed in this folder, it has been replaced. 2. Open the Enterprise Workbench DB Setup Tool from Start, Programs, CA, CM Enterprise Workbench, Setup Utilities, Enterprise Workbench DB Setup Tool, or find the tool in the Product Explorer as shown next. The Select Actions and Database Type panel opens. 10 Database Support for Microsoft SQL Server 2008
Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool 3. Select Install DB Support and SQL Server 2005, 2008, as shown next. Press Next. The Database Configuration Information panel opens. Chapter 1: Database Support for Microsoft SQL Server 2008 11
Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool 4. Fill in the password for the cmewadmn user and select Create New DB, as shown next. Press Next. The Define Data Source for SQL Server panel opens. 12 Database Support for Microsoft SQL Server 2008
Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool 5. Enter the name of the SQL Server 2008. For example, QWER is shown in the following sample panel. Press Next. Chapter 1: Database Support for Microsoft SQL Server 2008 13
Installing Support for SQL Server 2008 Using the Enterprise Workbench DB Setup Tool The Summary panel opens and should show that the target SQL Server is installed and no warning message should be displayed, as indicated in the following panel. 6. Click Finish. The installation of the DB Support starts. At the end of a successful installation, a message box appears indicating that the insulation was successful. 7. Run the Define Data Source & Deployment tool from Start, Programs, CA, CM Enterprise Workbench, Setup Utilities. Update the EnterpriseDb configuration file with the information about the server. Then click the deploy button to update the ew.war file with the new changes to the Enterprise DB.cfg to your JSP engine (Tomcat, Jboss or WebSphere). The config file is now able to locate the server. Note: For more information related to JDBC drivers, see the Using the JDBC Driver documentation. You can download both types of JDBC drivers directly from Microsoft. 14 Database Support for Microsoft SQL Server 2008