3M Prefabricated Crowns Conversion and Order Guide A comprehensive guide to ordering 3M Prefabricated Crowns.
Introduction 3M Prefabricated Crowns are available in many forms for a variety of single unit applications. They are a viable method of single unit temporization for both short and long term coverage. Benefits of prefabricated crowns include ease-of-use and time savings. Using the 3M Prefabricated Crown Conversion and Order Guide This guide has been designed to quickly and easily identify each crown type and corresponding key traits. In addition, the guide will facilitate ordering crown kits, crown refills, and crown instruments. Each crown type has a separate section in this guide that includes the following: 3M Polycarbonate Crown Conversion Chart Key crown characteristics and photograph 3M Polycarbonate Crowns Coverage Short- or long-term Dentition Permanent Selection Anterior and bicuspid 3M Polycarbonate Crowns C180 Kit Crown drawer only: C-000 Key Traits Polycarbonate resin with microglass fibers Strong and durable Contours and crimps similar to metal crowns Esthetic U62 shade 3M Polycarbonate Bosworth Caulk MESIAL DISTAL WIDTH IN MM U P P E R C E N T R A L S 6.5 7.5 LM6 RM6 E3 E4 7.7 15 14 LM5 RM5 8.0 16 13 LM4 RM4 D3 D4 8.2 17 12 8.3 LM3 RM3 8.4 18 11 8.5 8.8 LM2 RM2 C3 C4 8.9 19 10 9.0 9.2 3M Polycarbonate Crown Conversion Chart Upper Right CENTRALS Upper Left 9.4 102 101 LM1 RM1 B3 B4 9.6 100 101 10 11 12 13 14 15 16 17 18 19 102 103 10.0 A3 A4 Upper Right LATERALS Upper Left 10.1 103 100 U P P E R L A T E R A L S 2 20 21 22 23 24 25 26 27 28 29 200 Upper and Lower Right CUSPIDS Upper and Lower Left 4.5 5.0 5.5 300 301 30 31 32 33 34 35 36 37 38 39 302 303 FIRST BICUSPIDS SECOND BICUSPIDS 5.6 5.8 6.0 25 24 RL4 E2 E2 40 41 42 43 44 54 53 52 51 50 6.3 6.4 26 23 RL3 D2 D2 LOWER INCISORS (LONG) LOWER INCISORS (SHORT) 6.5 27 22 60 61 62 63 64 69 68 67 66 65 6.8 28 21 RL2 C2 B2 C2 B2 7.1 29 20 7.2 7.3 RL1 A2 A2 200 2 C U S P I D S (continued on page 4) 6.5 7.2 LC4 RC4 E1 E6 7.4 7.5 35 34 LC3 RC3 D1 D6 2 An enlarged crown order form which has been designed to identically match the configuration of each crown drawer. 3 A conversion chart including a cross-reference to assist in determining the correct crown size relative to a specific mesial/distal width. Additional Information For additional information on the clinical technique for 3M prefabricated crowns, please see the companion booklet 3M Prefabricated Crown User Guide. This guide and additional Crown Conversion and Order Guides are available through your 3M Dental Sales representative or by calling the 3M Technical Hotline at 1-800-634-2249. 1
3M Polycarbonate Crowns Coverage Short- or long-term Dentition Permanent Selection Anterior and bicuspid Key Traits Polycarbonate resin with microglass fibers Strong and durable Contours and crimps similar to metal crowns Esthetic U62 shade 3M Polycarbonate Crowns C180 Kit Crown drawer only: C-000 Upper Right CENTRALS Upper Left 100 101 10 11 12 13 14 15 16 17 18 19 102 103 Upper Right LATERALS Upper Left 2 20 21 22 23 24 25 26 27 28 29 200 Upper and Lower Right CUSPIDS Upper and Lower Left 300 301 30 31 32 33 34 35 36 37 38 39 302 303 FIRST BICUSPIDS SECOND BICUSPIDS 40 41 42 43 44 54 53 52 51 50 LOWER INCISORS (LONG) LOWER INCISORS (SHORT) 60 61 62 63 64 69 68 67 66 65 2
3M Polycarbonate Crown Conversion Chart MESIAL DISTAL WIDTH IN MM U P P E R 6.5 7.5 7.7 8.0 8.2 8.3 8.4 8.5 8.8 8.9 9.0 9.2 9.4 9.6 10.0 10.1 U P P E R 4.5 5.0 5.5 5.6 5.8 6.0 6.3 6.4 6.5 6.8 7.1 7.2 7.3 3M Polycarbonate Bosworth Caulk C E N T R A L S 15 16 17 18 19 102 103 L A T E R A L S 25 26 27 28 29 200 14 13 12 11 10 101 100 24 23 22 21 20 2 LM6 LM5 LM4 LM3 LM2 LM1 RM6 RM5 RM4 RM3 RM2 RM1 RL4 RL3 RL2 RL1 E3 D3 C3 B3 A3 E2 D2 C2 B2 A2 E4 D4 C4 B4 A4 E2 D2 C2 B2 A2 3M Polycarbonate Crown C U S P I D S (continued on page 4) 6.5 7.2 LC4 RC4 E1 E6 7.4 7.5 35 34 LC3 RC3 D1 D6 3
3M Polycarbonate Crown 3M Polycarbonate Crown Conversion Chart (continued) MESIAL DISTAL WIDTH IN MM 7.7 7.8 8.0 8.1 8.3 8.4 8.5 8.6 8.8 8.9 9.0 B I C U S P I D S 6.0 6.2 6.4 6.5 6.8 6.9 7.2 7.5 L O W E R 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.6 5.7 5.8 6.0 6.3 6.4 3M Polycarbonate Bosworth Caulk C U S P I D S (continued from page 3) 36 37 38 39 302 303 44 54 43 42 /53 41/52 40 /51 50 I N C I S O R S 65 66 64 67 63 62 68 61/69 60 33 32 31 30 301 300 LC2 LC1 B4 B3 B2 13 L/ 16 5 12 L/ 15 S 11 L/ 15 S 10 L/ 14 S RC2 RC1 C1 B1 A1 F 7 F 5 F 3 F 1 H 5 H 4 H 3 H 2 H 1 C6 B6 A6 F 8 F 6 F 4 F 2 H 5 H 4 H 3 H 2 H 1 4
3M Strip Crown Forms Dentition Primary Selection Anterior Key Traits Automatically contours restorative material to match the natural dentition Strips off easily leaving a smooth surface Thin interproximal walls Sufficient strength for easy handling Ideal for chemical or light-cured composites 3M Pediatric Strip Crown Forms 915100 Kit Crown drawer only: PS-000 Right UR 1 914011 UR 2 914012 UPPER CENTRALS UR 2 914012 UL 1 914001 UL 2 914002 Left UL 2 914002 3M Strip Crown Forms UR 3 914013 UR 3 914013 UR 4 914014 UL 3 914003 UL 3 914003 UL 4 914004 Right UPPER LATERALS Left UR 1 914031 UR 2 914032 UR 2 914032 UL 1 914021 UL 2 914022 UL 2 914022 UR 3 914033 UR 3 914033 UR 4 914034 UL 3 914023 UL 3 914023 UL 4 914024 MESIAL DISTAL WIDTH IN MM 3M Pediatric Strip Crown Forms C E N T R A L S 6.0 6.7 7.4 8.1 L A T E R A L S 4.3 5.1 5.9 6.7 5
3M Iso-Form Crowns 3M Iso-Form and 3M Gold Anodized Short-Term Temporary Crowns Left - First Molar U69 U67 U65 U63 U61 Left - Second Molar U79 U77 U75 U73 U71 Left - First Molar Coverage Short-term Dentition Permanent Selection Molar and bicuspid 3M Iso-Form Molar Crowns MC-64 Kit Crown drawer only: MC-000 UPPER Key Traits Tin-silver alloy Pre-finished, belled and contoured Can be stretched and burnished to fit prep margins Faster placement than acrylics or chemical resins for single units Right - First Molar U60 U62 U64 U66 U68 Right - Second Molar U70 U72 U74 U76 U78 Right - First Molar 3M Shell Crowns S-100 Kit 1 2 3 4 5 6 7 8 9 10 L69 L67 L65 L63 L61 Left - Second Molar L60 L62 L64 L66 L68 Right - Second Molar 11 12 13 14 15 16 17 18 19 20 L79 L77 L75 L73 L71 L70 L72 L74 L76 L78 LOWER 3M Iso-Form Bicuspid Crowns BC-64 Kit Crown drawer only: BC-000 Left - First Bicuspid UPPER Right - First Bicuspid U49 U47 U45 U43 U41 Left - Second Bicuspid U40 U42 U44 U46 U48 Right - Second Bicuspid U59 U57 U55 U53 U51 Left - First Bicuspid U50 U52 U54 U56 U58 Right - First Bicuspid L49 L47 L45 L43 L41 Left - Second Bicuspid L40 L42 L44 L46 L48 Right - Second Bicuspid L59 L57 L55 L53 L51 L50 L52 L54 L56 L58 LOWER 6
3M Gold Anodized Crowns Coverage Short-term Dentition Permanent Selection Molar and bicuspid Key Traits Medium-hard aluminum for durability and function Gold anodized to eliminate metallic taste and galvanic shock Parallel wall design 3M Gold Anodized Molar Crowns 942301 Kit Crown drawer only: GM-000 FIRST MOLAR SECOND MOLAR UR-1 940321 UR-2 940322 UR-3 940323 LR-1 940341 LR-2 940342 LR-3 940343 LR+1 940441 LR+2 940442 LR+3 940443 UR-4 940324 UR-5 940325 UR-6 940326 LR-4 940344 LR-5 940345 LR-6 940346 LR+4 940444 LR+5 940445 LR+6 940446 UL-1 940311 UL-4 940314 UL-2 940312 UL-5 940315 UL-3 940313 UL-6 940316 LL-1 940331 LL-4 940334 UR 00 940519 UR 0 940520 LL-2 940332 LL-5 940335 UPPER UR 1 940521 LL-3 940333 LL-6 940336 UR 2 940522 LL+1 940431 LL+4 940434 LR 1 940541 LL+2 940432 LL+5 940435 LR 2 940542 LL+3 940433 LL+6 940436 3M Gold Anodized Bicuspid Crowns 942501 Kit Crown drawer only: GB-000 First Bicuspid LR 3 940543 LOWER Note: Upper first and second molars utilize the same crown. LR 1 940641 Second Bicuspid LR 2 940642 LR 3 940643 3M Iso-Form and 3M Gold Anodized Short-Term Temporary Crowns Note: Upper first and second bicuspids utilize the same crown. UR 3 940523 UL 00 940509 UL 0 940510 UR 4 940524 UL 1 940511 UR 5 940525 UR 6 940526 UL 2 940512 LR 4 940544 LL 1 940531 LR 5 940545 LL 2 940532 LR 6 900546 LR 0 940540 LL 3 940533 LR 4 940644 LL 1 940631 LR+5 940645 LL 2 940632 LR 6 940646 LR 0 940640 LL 3 940633 UL 3 940513 UL 4 940514 UL 5 940515 UL 6 940516 LL 4 940534 LL 5 940535 LL 6 940536 LL 0 940530 LL 4 940634 LL 5 940635 LL 6 940636 LL 0 940630 7
3M Iso-Form and 3M Gold Anodized Short-Term Temporary Crowns 3M Iso-Form and 3M Gold Anodized Short-Term Temporary Crown Conversion Chart 3M Gold 3M Iso-Form Anodized Parkell 3M Shell MESIAL DISTAL WIDTH IN MM U P P E R F I R S T B I C U S P I D S 5.6 6.1 6.4 U 41 UL00 UL0 U 40 6.9 U 43 U 42 7.1 7.3 U 45 U 44 7.7 U 47 U 46 8.1 8.5 U 49 U 48 8.6 9.1 UL5 UL6 UR00 UR0 UR5 UR6 U P P E R S E C O N D B I C U S P I D S 5.6 UL00 UR00 6.0 U 51 U 50 6.1 UL0 UR0 6.7 U 53 U 52 7.1 7.5 U 55 U 57 U 54 U 56 8.0 U 59 U 58 8.1 8.6 9.1 UL5 UL6 UR5 UR6 L O W E R F I R S T B I C U S P I D S 5.7 6.1 L 41 L 43 L 40 L 42 LL0 LR0 7.1 7.4 L 45 L 44 7.8 L 47 L 46 8.1 8.5 L 49 L 48 8.6 LL6 LR6 L O W E R S E C O N D B I C U S P I D S 6.2 LL0 LR0 6.8 L 51 L 50 7.1 7.2 L 53 L 52 8.1 8.2 L 55 L 57 L 54 L 56 8.6 9.0 L 59 L 58 9.1 LL6 LR6 BU 5 BU 7 BU 8 BU 10 BU 11 BU 12 BU 4 BU 6 BU 9 BU 10 BU 11 BL 4 BL 5 BL 7 BL 8 BL 9 BL 11 BL 6 BL 7 BL 8 BL 9 BL 10 BL 11 BL 12 BU 5 BU 7 BU 8 BU 10 BU 11 BU 12 BU 4 BU 6 BU 9 BU 10 BU 11 BL 4 BL 5 BL 7 BL 8 BL 9 BL 11 BL 6 BL 7 BL 8 BL 9 BL 10 BL 11 BL 12 4 7 8 9 3 5 6 7 8 5 6 7 8 9 6 7 8 9 11 8
3M Iso-Form and 3M Gold Anodized Short-Term Temporary Crown Conversion Chart (cont.) 3M Gold 3M Iso-Form Anodized Parkell 3M Shell MESIAL DISTAL WIDTH IN MM U P P E R F I R S T M O L A R S 9.4 9.9 10.3 U 61 U 60 10.4 10.7 U 63 U 62 10.9 11.1 U 65 U 64 11.4 11.5 U 67 UL5 U 66 11.9 UL6 12.0 U 69 U 68 U P P E R S E C O N D M O L A R S 9.0 U 71 U 70 9.4 9.5 U 73 U 72 9.9 10.2 U 75 U 77 U 74 U 76 10.4 10.5 U 79 U 78 10.9 11.4 11.9 UL5 UL6 L O W E R F I R S T M O L A R S 9.9 10.4 10.9 11.1 L 61 L 60 11.4 11.7 L 63 L 65 L 62 L 64 11.9 12.0 L 67 L 66 12.4 L 69 L 68 LL6 L O W E R S E C O N D M O L A R S 9.6 9.8 L 71 L 70 10.2 10.4 L 73 L 72 10.7 10.8 L 75 L 74 11.2 11.6 L 77 L 79 L 78 L 78 11.7 11.9 12.2 LL6 C R O W N I D E N T I F I C A T I O N UR5 UR6 UR5 UR6 LR6 LR6 MUL 14 MUL 15 MUL 16 MUL 17 MUL 18 MUL 19 MUL 20 MUL 12 MUL 13 MUL 14 MUL 15 MUL 16 MUL 19 MUL 20 MLL 14 MLL 15 MLL 16 MLL 17 MLL 18 MLL 19 MLL 20 MLL 14 MLL 15 MLL 16 MLL 17 MLL 18 MLL 19 MLL 20 MUR 14 MUR 15 MUR 16 MUR 17 MUR 18 MUR 19 MUR 20 MUR 12 MUR 13 MUR 14 MUR 15 MUR 16 MUR 19 MUR 20 MLR 14 MLR 15 MLR 16 MLR 17 MLR 18 MLR 19 MLR 20 MLR 14 MLR 15 MLR 16 MLR 17 MLR 18 MLR 19 MLR 20 15 16 17 18 19 12 13 14 15 16 16 17 18 19 20 13 15 16 17 18 3M Iso-Form and 3M Gold Anodized Short-Term Temporary Crowns 3M Gold Anodized Temporary Crowns Upper First & Second Molars Lower First Molar Lower Second Molar Upper First & Second Bicuspid Lower First Bicuspid Lower Second Bicuspid Color of I.D. Print Code Dash Dash Plus None Dot None Example UR 3 UL 5 LR 2 LL 6 LR+2 LL+6 UL5 LR 2 LL 2 Note 3M Gold Anodized Crowns: Upper first and second molars utilize the same crown. Upper first and second bicuspids utilize the same crown. 9
3M Stainless Steel Crowns Coverage Short- or long-term Dentition Primary Permanent Selection Molar (primary, permanent) 3M Stainless Steel Primary Molar ND 96 Kit Crown drawer only: ND-000 Key Traits Minimal adjustment Pre-trimmed, belled and crimped Accurately duplicates anatomy Superior longevity compared to multi-surface amalgam fillings UPPER D-UL-7 D-UL-6 D-UL-5 D-UL-4 D-UL-3 D-UL-2 D-UR-2 D-UR-3 D-UR-4 D-UR-5 D-UR-6 D-UR-7 E-UL-7 E-UL-6 E-UL5 E-UL-4 E-UL-3 E-UL-2 E-UR-2 E-UR-3 E-UR-4 E-UR-5 E-UR-6 E-UR-7 D-LL-7 D-LL-6 D-LL-5 D-LL-4 D-LL-3 D-LL-2 D-LR-2 D-LR-3 D-LR-4 D-LR-5 D-LR-6 D-LR-7 E-LL-7 E-LL-6 E-LL-5 E-LL-4 E-LL-3 E-LL-2 E-LR-2 E-LR-3 E-LR-4 E-LR-5 E-LR-6 E-LR-7 LOWER UPPER 6-UL-4 6-UL-3 6-UL-2 6-UR-2 6-UR-3 6-UR-4 6-UL-7 6-UL-6 6-UL-5 6-UR-5 6-UR-6 6-UR-7 3M Stainless Steel Crowns and 3M Unitek Stainless Steel Crowns 6-LL-4 6-LL-7 6-LL-3 6-LL-6 6-LL-2 6-LL-5 LOWER 6LR-2 6LR-5 6-LR-3 6-LR-6 3M Stainless Steel Permanent Molar PO 96 Kit Crown drawer only: PO-000 10 6-LR-4 6-LR-7
3M Unitek Crowns Stainless Coverage Short- or long-term Steel Dentition Thick occlusal surface to help prevent bite-through Primary Parallel walls Permanent Pre-trimmed to optimum length and contour Selection Molar and bicuspid (permanent) Anterior and molar (primary) 3M Unitek Stainless Steel Primary Anterior 908100 Kit Crown drawer only: PA-000 CENTRALS LATERALS CUSPIDS Key Traits Shallow occlusal anatomy/less tooth reduction 907001 907002 907003 907021 907022 907023 U1 907041 U2 907042 U3 907043 907004 UL5 907005 UL6 907006 907024 UL5 907025 UL6 907026 U4 907044 U5 907045 U6 907046 907011 907012 907013 907031 907032 907033 L1 907051 L2 907052 L3 907053 907014 UR5 907015 UR6 907016 907034 UR5 907035 UR6 907036 L4 907054 L5 907055 L6 907056 FIRST PRIMARY SECOND PRIMARY 900121 UR7 900127 900122 900123 900124 UR5 900125 UR6 900126 900221 UR7 900227 900222 900223 900224 UR5 900225 UR6 900226 900111 UL7 900117 900141 LR7 900147 900131 LL7 900137 900112 900142 900132 900113 900143 900133 900114 900144 900134 UL5 900115 900145 900135 11 UL6 900116 LR6 900146 LL6 900136 900211 UL7 900217 900241 LR7 900247 900231 LL7 900237 900212 900242 900232 900213 900243 900233 900214 900244 900234 3M Unitek Stainless Steel Primary Molar 902150 Kit Crown drawer only: PR-000 UL5 900215 900245 900235 UL6 900216 LR6 900246 LL6 900236 3M Stainless Steel Crowns and 3M Unitek Stainless Steel Crowns
3M Unitek Stainless (continued from page 11) Steel Crowns 3M Unitek Stainless Steel Permanent Molar 902350 Kit Crown drawer only: PM-000 FIRST MOLAR SECOND MOLAR UR-1 900321 UR-7 900327 UR-2 900322 UR-3 900323 UR-4 900324 UR-5 900325 UR-6 900326 LR+1 900441 LR+2 900442 LR+3 900443 UL-1 900311 UL-7 900317 UL-2 900312 UL-3 900313 UL-4 900314 UL-5 900315 UL-6 900316 LR+4 900444 LR+5 900445 LR+6 900446 LR-1 900341 LR-7 900347 LR-2 900342 LR-3 900343 LR-4 900344 LR-5 900345 LR-6 900346 LL+1 900431 LL+2 900432 LL+3 900433 Note: Upper first and second molars utilize the same crown. LL-1 900331 LL-7 900337 LL-2 900332 LL-3 900333 LL-4 900334 LL-5 900335 LL-6 900336 LL+4 900434 LL+5 900435 LL+6 900436 3M Unitek Stainless Steel Bicuspid 902600 Kit Crown drawer only: SB-000 UPPER First Bicuspid LOWER Second Bicuspid 900521 900522 900523 LR 1 900541 LR 2 900542 LR 3 900543 900641 900642 900643 900524 UR 5 900525 UR 0 900520 UR 6 900526 UR 00 900519 LR 4 900544 LR 5 900545 LR 6 900546 LR 0 900540 900644 900645 LR 6 900646 LR 0 900640 3M Stainless Steel Crowns and 3M Unitek Stainless Steel Crowns Note: Upper first and second bicuspids utilize the same crown. 900511 900514 900512 UL 5 900515 UL 0 900510 900513 UL 6 900516 UL 00 900509 LL 1 900531 LL 4 900534 12 LL 2 900532 LL 5 900535 LL 3 900533 LL 6 900536 LL 0 900530 900631 900634 900632 900635 900633 LL 6 900636 LL 0 900630
Primary Anterior Crown Conversion Chart 3M Unitek Masel Rocky Mountain MESIAL DISTAL WIDTH IN MM CENTRAL / P R I M A R Y 3.3 3.5 3.8 4.0 4.2 4.3 4.5 4.6 4.8 5.0 5.3 5.4 5.5 5.8 5.9 6.0 L1/R1 6.2 6.3 6.4 L2/R2 6.5 6.8 L3/R3 7.2 L4/R4 7.3 7.5 L5/R5 8.0 L6/R6 4.8 5.0 5.2 5.4 5.5 5.7 5.8 6.0 6.2 6.4 6.7 7.4 7.8 8.2 LATERAL / L1/R1 L2/R2 L3/R3 L4/R4 L5/R5 L6/R6 CENTRAL/LATERAL C E N T R A L/ L A T E R A L L 2 L 3 L 4 L 5 L/R 00 L/R 0 L/R 1 L/R 2 L/R 3 L/R 4 P R I M A R Y U P P E R C U S P I D S 1 2 3 4 5 6 P R I M A R Y L O W E R C U S P I D S 4.8 5.0 5.2 5.4 5.5 5.6 5.7 5.8 6.0 6.1 6.2 6.4 6.7 6.8 1 2 3 4 5 6 L 2 L 3 L 4 L 5 R 2 R 3 R 4 R 5 R 2 R 3 R 4 R 5 13 CENTRAL/LATERAL LC 61 LC 62 LC 63 LC 67 LC 61 LC 62 LC 63 LC 67 L/R C 74 L/R C 75 L/R C 76 L/R C 77 L/R 5 RC 61 RC 26 RC 63 RC 67 RC 61 RC 62 RC 63 RC 67 C R O W N I D E N T I F I C A T I O N Example L1 R3 L3 R2 1(no L and R) 3(no L and R) Code None None None None Color of I.D. Print Red Green Blue Unitek Primary Anterior Stainless Steel Crowns Upper Primary Centrals Upper Primary Laterals Upper Primary Cuspids Upper Primary Cuspids 3M Stainless Steel Crowns and 3M Unitek Stainless Steel Crowns
3M Stainless Steel Crowns and 3M Unitek Stainless Steel Crowns Primary Molar Crown Conversion Chart 3M Stainless Steel 3M Unitek Rocky Mountain MESIAL DISTAL WIDTH IN MM U P P E R F I R S T P R I M A R Y M O L A R S 6.8 7.2 D UL 2 D UR 2 7.4 D UL 3 D UR 3 7.8 8.0 D UL 4 D UR 4 8.2 UL5 UR5 8.4 D UL 5 D UR 5 8.6 UL6 UR6 8.8 D UL 6 D UR 6 9.0 UL7 UR7 9.2 D UL 7 D UR 7 U P P E R S E C O N D P R I M A R Y M O L A R S 8.5 9.0 9.2 9.4 9.5 9.6 9.8 10.0 10.2 10.4 10.6 10.8 11.0 11.2 6.9 7.3 7.4 7.7 7.8 8.1 8.2 8.5 8.6 8.9 9.0 9.3 8.5 9.0 9.4 9.5 9.8 10.0 10.2 10.5 10.6 11.0 11.4 11.5 E UL 2 E UR 2 E UL 3 E UR 3 E UL 4 E UR 4 UL5 UR5 E UL 5 E UR 5 UL6 UR6 E UL 6 E UR 6 UL7 UR7 E UL 7 E UR 7 L O W E R F I R S T P R I M A R Y M O L A R S D LL 2 D LL 3 D LL 4 D LL 5 D LL 6 D LR 2 D LR 3 D LR 4 D LR 5 D LR 6 D LL 7 D LR 7 LL7 LR7 L O W E R S E C O N D P R I M A R Y M O L A R S E LL 2 E LL 3 E LL 4 E LL 5 E LL 6 E LL 7 E LR 2 E LR 3 E LR 4 E LR 5 E LR 6 E LR 7 LL6 LL6 LL7 14 LR6 LR6 LR7 STANDARD/FESTOONED C18/C155 C5/C156 C6/C157 C7/C158 C8/C159 C25/C179 C26/C180 C27/C181 C28/C182 C20/C165 C13/C166 C14/C167 C15/C168 C16/C169 C29/C183 C30/C184 C31/C185 C32/C186 C17/C150 C1/C151 C2/C152 C3/C153 C4/C154 C21/C175 C22/C176 C23/C177 C24/C178 C19/C160 C9/C161 C10/C162 C11/C163 C12/C164 C33/C187 C35/C188 C35/C189 C36/C190
Permanent Bicuspid Crown Conversion Chart 3M Unitek Masel MESIAL DISTAL WIDTH IN MM U P P E R F I R S T A N D S E C O N D B I C U S P I D S 5.6 6.1 6.7 7.1 7.4 7.5 7.8 8.0 8.1 8.2 8.5 8.6 8.8 9.0 9.1 9.5 UL00 UL0 UL5 UL6 UR00 UR0 UR5 UR6 L 5 L 6 L 7 L 8 L 9 L 10 L 11 L 12 L 13 R 5 R 6 R 7 R 8 R 9 R 10 R 11 R 12 R 13 L O W E R F I R S T B I C U S P I D S 5.7 6.1 6.4 6.9 7.1 7.4 7.5 7.7 7.9 8.0 8.1 8.5 8.6 8.8 9.0 9.2 9.5 LL0 LL6 LR0 LR6 L 4 L 5 L 6 L 7 L 8 L 9 L 10 L 11 L 12 L O W E R S E C O N D B I C U S P I D S 6.2 6.4 LL0 LR0 L 4 6.9 7.1 7.4 7.5 7.7 7.9 8.0 8.1 8.5 8.6 8.8 9.0 9.1 9.2 9.5 LL6 LR6 L 5 L 6 L 7 L 8 L 9 L 10 L 11 L 12 15 R 4 R 5 R 6 R 7 R 8 R 9 R 10 R 11 R 12 R 4 R 5 R 6 R 7 R 8 R 9 R 10 R 12 3M Stainless Steel Crowns and 3M Unitek Stainless Steel Crowns
Permanent Molar Crown Crown Conversion Chart MESIAL DISTAL WIDTH IN MM 3M Stainless Steel 3M Unitek Rocky Mountain U P P E R F I R S T A N D S E C O N D P E R M A N E N T M O L A R S 9.4 9.9 10.4 C44/C200 C41/C196 10.7 6 UL 2 6 UR 2 10.9 C45/C201 C42/C197 11.1 6 UL 3 6 UR 3 11.4 UL5 UR5 C46/C202 C43/C198 11.5 11.9 6 UL 4 6 UL 5 6 UR 4 6 UR 5 12.0 UL6 UR6 C54/C203 C53/C199 12.3 6 UL 6 6 UR 6 12.5 UL7 UR7 12.8 6 UL 7 6 UR 7 L O W E R F I R S T P E R M A N E N T M O L A R S 9.9 10.4 10.8 10.9 11.2 11.4 11.6 12.0 12.4 12.5 12.8 13.0 9.6 10.1 10.7 11.7 12.1 6 LL 2 6 LL 3 6 LL 4 6 LL 5 6 LL 6 6 LL 7 6 LR 2 6 LR 3 6 LR 4 6 LR 5 6 LR 6 6 LR 7 LL6 LL7 LR6 LR7 L O W E R S E C O N D P E R M A N E N T M O L A R S STANDARD/FESTOONED C50/C208 C51/C209 C52/C210 C56/C211 C47/C204 C48/C205 C49/C206 C55/C207 C R O W N I D E N T I F I C A T I O N 3M Unitek Stainless Steel Molar Crowns First Primary Molar Second Primary Molar Upper and Lower First Permanent Molar Lower Second Permanent Molar Color of I.D. Print Code Dot None Dash Plus Example UL 1 LR 3 UL 3 LR 1 LR+1 LL+3 3M Stainless Steel Crowns and 3M Unitek Stainless Steel Crowns C R O W N I D E N T I F I C A T I O N 3M Unitek Stainless Steel Bicuspid Crowns Upper First & Second Bicuspid Crowns Lower First Bicuspid Lower Second Bicuspid Color of I.D. Print Code None Dot None Example LL 2 LR 4 16
3M Crown Instruments 800112 801201 800417 801202 800421 801203 3M Crown Contouring Plier Used for enhancing crown form contours to improve interproximal contacts and gingival margins for the 3M temporary crown forms. 800112: 3M Crown Contouring Plier 3M Crown Crimping Plier Designed to crimp the gingival margin of the 3M temporary crown forms. 800417: 3M Crown Crimping Plier 800421: 3M Small Crown Crimping Plier 3M Crown Scissors Designed for trimming margins of the 3M temporary crown forms. 801201: 3M Deluxe Straight Crown Scissor 801202: 3M Deluxe Curved Crown Scissor 801203: 3M Deluxe Festooning Crown Scissor Refills Each crown size is available in refill boxes of 5 crowns.
3M Technical Hotline: 1-800-634-2249 3M Dental Products Web Site: http://www.3m.com/dental 3M, Iso-Form and Unitek are registered trademarks of 3M. Bosworth is a registered trademark of Henry J. Bosworth Company. Caulk is a registered trademark of Dentsply Research & Development Corp. Parkell is a registered trademark of Parkell Products, Inc. Masel is a registered trademark of Masel Orthodontics, Inc. Rocky Mountain is a registered trademark of Rocky Mountain Associates International, Inc. 3 Dental Products 3M Center Building 275-2SE-03 St. Paul, MN 55144-1000 Dental Products 3M Canada Inc. Post Office Box 5757 London, Ontario N6A 4T1 Canada 1 800 563-2921 40% Pre-consumer waste paper 10% Post-consumer waste paper Copyright 3M (IPC)2000. All rights reserved. 70-2009-2146-1