IPS e.max CAD C16. Larger Size Block Low translucency Shades: A1, A2, A3, A3.5, B1, B2, C1, C2, D2, BL2 Indicated for single unit restorations
|
|
- Johnathan Cooper
- 7 years ago
- Views:
Transcription
1
2
3
4 IPS e.max CAD C16
5 IPS e.max CAD C16 Larger Size Block Low translucency Shades: A1, A2, A3, A3.5, B1, B2, C1, C2, D2, BL2 Indicated for single unit restorations Full and partial coverage single units Large canines Restorations over custom abutments
6 IPS e.max CAD 3-unit bridge
7 Instructions for Use Ordering # for Flow chart
8 Indications / contraindications Indications Up to three-unit bridges up to the second premolar as the abutment tooth Contraindications Inlay bridges Parafunction (e.g. bruxism) Cantilever bridges Maryland bridges Pontic width > 11 mm in the anterior region Pontic width > 9 mm in the premolar region Any other use not listed as an indication for IPS e.max CAD
9 Connector Dimensions Dimensions: 16 mm 2 Height >= Width Important: Currently, the new CEREC 4.2 software does NOT have a tool to measure the area of the connector The new E4D Software will have a measuring tool
10 Processing options
11 Staining technique using IPS e.max CAD Crystall
12 Staining technique Bridge after CAD/CAM milling approximately 8 minutes per unit = 24 minutes Actual times may vary Smooth out the attachment point and take proximal contacts into account.
13 Staining technique Do not use diamond discs for finishing, since this may result in predetermined breaking points. Finish interdental areas with fine-grit diamonds (grit size µm). Make sure to observe the connector dimensions.
14 Staining technique Check occlusion, articulation and proximal contacts. Surface-grind the outer surface, particularly the functional areas of the restoration, with a fine diamond to smooth out the surface structure created by the CAD/CAM process.
15 Staining technique Use the largest possible IPS e.max CAD Crystallization Pin for crystallization. Fill the inside of the crowns of the previously cleaned bridge with IPS Object Fix Putty or Flow and press the appropriate IPS e.max CAD Crystallization Pin deeply into the IPS Object Fix material.
16 Staining technique Place the bridge on the IPS e.max CAD Crystallization Tray immediately. Smooth out displaced IPS Object Fix Putty or Flow with a plastic spatula from the margin towards the support pin so that the pin is secured in the paste and the crown wall is precisely supported.
17 Staining technique Clean off any possible residue adhering to the outer surface of the restoration with a brush moistened with water and then dry. Apply IPS e.max CAD Crystall./Glaze paste evenly to the blue restoration. Apply the mixed IPS e.max CAD Crystall./ Shades and Stains into the unfired IPS e.max CAD Crystall./Glaze paste.
18 Combination Firing Glaze & Crystallize P1 Use Program P1 Place the IPS e.max CAD Crystallization Tray with the glazed and stained restoration in the furnace and conduct the combination firing.
19 Correction Firing Use P1 Use Program P1 If adjustments are required (shade, glaze, contact points), conduct a separate corrective firing cycle on the IPS e.max CAD Crystallization Tray.
20 Staining technique Completed IPS e.max CAD LT bridge.
21 Firing parameters
22 Cementation
23 Conditioning of the restoration Do not blast the restorations with Al 2 O 3 or glass polishing beads. Etch with 5% hydrofluoric acid (e.g. IPS Ceramic Etching Gel) for 20 seconds and rinse the acid off with water.
24 Conditioning of the restoration Allow Monobond Plus to react for 60 s and then blow dry with the air syringe. Silanization is not required for conventional cementation procedures.
25 Dr. R. Watzke, Liechtenstein
26 Dr. R. Watzke, Liechtenstein
27 IPS e.max CAD 3 unit bridge, R. Watzke, Liechtenstein
28 IPS e.max CAD 3 unit bridge, R. Watzke, Liechtenstein
29 IPS e.max CAD IPS 3 unit e.max bridge, CAD 3 unit R. Watzke, bridge, Liechtenstein R. Watzke, Liechtenstein
30 CEREC Owner Needs to do a Bridge Software version 4.2 MCLX Mill
31 New Blocks for CEREC
32 all ceramic all options
33 Available Now New New
34 Coming
35 New Blocks for CEREC Key Points C16 & B32 will be at Patterson shortly Owners NEED software version 4.2 to be able to design and mill anterior bridges with the B32 block Stain, Glaze, & Crystallization process is similar to a single unit Crystallize & correction fire on P1 Cementation options
36 IPS e.max CAD Block Pricing IPS e.max CAD Qty per Refill Whlse Retail I12 5 $ $ C14 5 $ $ C16 5 $ $ B32 3 $ $ B40 current 3 $ $ B40L 3 $ $ A14 5 $ $ A16 5 $ $360.00
37
CAD. Abutment Solutions. Instructions for Use. (for USA only) all ceramic all you need
CAD Abutment Solutions all ceramic all you need Instructions for Use (for USA only) Table of Contents 3 IPS e.max System 4 IPS e.max CAD 5 Product Information Description of IPS e.max CAD Abutment Solutions
More informationCAD INSTRUCTIONS FOR USE CHAIRSIDE
CAD INSTRUCTIONS FOR USE CHAIRSIDE TABLE OF CONTENTS 3 IPS e.max System all you need 4 IPS e.max CAD Product Information Material Usage Composition Block concept Product overview for CEREC Preparation
More informationImplant Abutments and Crowns on your CEREC. Welcome
Welcome Welcome Welcome Robert Marcus D.M.D. UConn Dental 1993 Poway (SD) office since 1997 CEREC user since 2004 CEREC Mentor and Trainer Founder of Kick Your Apps, Inc. Control Freak Welcome Many thanks
More informationthe new dna of high strength glass ceramics
the new dna of high strength glass ceramics 1 the new dna of high strength glass ceramics Together with the Fraunhofer Institute and VITA, we have developed a new class of materials for high-strength glassceramics
More informationpriti crown Your patients deserve you
priti crown Your patients deserve you 3 and you deserve the priti crown So close to nature priti crown is a high-tech solution for making perfect crown and bridge restorations using state-of-the-art CAD/CAM
More informationAbutment Solutions For customized implant restorations fabricated with CEREC and inlab. Digital all around.
Abutment Solutions For customized implant restorations fabricated with CEREC and inlab Digital all around. The digital treatment workflow Digital impression taking Coordinated digital workflows in CAD/CAM
More informationIPS. Special Edition. Press-on-Metal Ceramic. Harald Gritsch Max Wörishofer Christoph Zobler
InLine PoM Press-on-Metal Ceramic IPS Special Edition Harald Gritsch Max Wörishofer Christoph Zobler Press-on technique on metal frameworks Combining the widely known casting technique and press technique
More informationIPS Empress CAD for CAD/CAM technology Information for Dentists. Confidence. Reliability. Esthetics. Empress CAD. The world s leading all-ceramic
CAD for CAD/CAM technology Information for Dentists Confidence Reliability Esthetics The world s leading all-ceramic A time-tested system with new possibilities More versatility with revolutionized the
More informationClass I and II Indirect Tooth-Colored Restorations
Class I and II Indirect Tooth-Colored Restorations Most indirect restorations are made on a replica of the prepared tooth in a dental laboratory by a trained technician. Tooth-colored indirect systems
More informationSTEP-BY-STEP INSTRUCTIONS ON THE PROSTHETIC PROCEDURES. Straumann Anatomic IPS e.max Abutment
STEP-BY-STEP INSTRUCTIONS ON THE PROSTHETIC PROCEDURES Straumann Anatomic IPS e.max Abutment The ITI (International Team for Implantology) is academic partner of Institut Straumann in the areas of research
More informationPress Abutment Solutions
Press Abutment Solutions Efficiency and esthetics redefined all ceramic all you need More press ceramic options... Press ceramics have been synonymous with the ideal combination of accuracy of fit, shape
More informationPress INSTRUCTIONS FOR USE
Press INSTRUCTIONS FOR USE TABLE OF CONTENTS 3 IPS e.max System all you need 4 IPS e.max Press Product Information Material Usage Composition Ingot concept Product overview and descriptions 16 IPS e.max
More informationRestoration of a screw retained single tooth restoration in the upper jaw with Thommen Titanium base abutment.
Restoration of a screw retained single tooth restoration in the upper jaw with Thommen Titanium base abutment. Dr. med. dent. David McFadden, Dallas County, USA Initial situation (single X-ray) Tooth 16
More informationInLine IPS. InLine. One. InLine. PoM. InLine. Instructions for Use IPS IPS IPS. Press-on-Metal ceramic. One-layer metal-ceramic
IPS InLine One-layer metal-ceramic One IPS InLine Conventional metal-ceramic IPS InLine Press-on-Metal ceramic PoM IPS InLine Instructions for Use IPS InLine One-layer metal-ceramic One IPS InLine Conventional
More informationFAQs - RelyX TM Unicem 2 Automix/Clicker
FAQs - RelyX TM Unicem 2 Automix/Clicker Generals 1. What clinical data is available on RelyX Unicem 2 Automix/Clicker? RelyX Unicem 2 Automix/Clicker were tested for biocompatibility before release. RelyX
More informationWAX-UP AND CERAMIC EXTENSIVE COURSE Dr. Dario Adolfi Dr. Ivan Ronald Huanca
WAX-UP AND CERAMIC EXTENSIVE COURSE Dr. Dario Adolfi Dr. Ivan Ronald Huanca Duration: 6 meses STEP 1: WAX-UP OF FOUR UPPER POSTERIOR TEETH with Dr. Ivan Ronald Huanca The objective of this course s step
More informationCAD/CAM Block Overview Block-Übersicht
CAD/CAM Block Overview Block-Übersicht IPS Empress CAD Leucite-reinforced glass-ceramic Leuzitverstärkte Glaskeramik Multi.5 BL 1 L HT (High Translucency) Chromascop.5 100 200 300 I 8 I 10 D3 LT (Low Translucency)
More informationJacket crown. Advantage : Crown and Bridge
Crown and Bridge Lecture 1 Dr.Nibras AL-Kuraine Jacket crown It is a type of crown that is formed by a tooth colored material. It is mainly used as a single unit in the anterior quadrant of the mouth.
More informationChoosing the right type of abutment
50 Producing custom implant abutments using CAD/CAM Choosing the right type of abutment S. KHALILOVA 1, F. KISTLER 2, S. ADLER 3, S. WEISS 3, S. KISTLER 2 AND J. NEUGEBAUER 2,4 Rapid developments in the
More informationAdvances in All Ceramic Restorations. Alaa AlQutub Umm AlQura University, Faculty of Dentistry
Advances in All Ceramic Restorations Alaa AlQutub Umm AlQura University, Faculty of Dentistry Types of materials used in esthetic zone I. Metal ceramic restoration: Metal ceramic alloy features : Produce
More informationUniversal Crown and Bridge Preparation
Universal Crown and Bridge Preparation The All-Ceramic Crown Preparation Technique for Predictable Success According to Dr. Ronald E. Goldstein Expect the Best. Buy Direct. The Universal * Crown and Bridge
More informationCEREC inlab the multifunctional CAD/CAM system for modern dental restorations.
CEREC inlab the multifunctional CAD/CAM system for modern dental restorations. CEREC inlab technology CEREC inlab progress coupled with experience: Sirona s leading-edge CAD/CAM system. Sirona: a leading
More informationYour stepping stones to success.
CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS THE inlab SYSTEM AND ITS COMPONENT PARTS Your stepping stones to success. T h e D e n t a l C o m p a n y inlab YOUR FUTURE-ORIENTED
More informationFull Crown Module: Learner Level 1
Full Crown Module Restoration / Tooth # Full Gold Crown (FGC) / 30 Extensions: Porcelain Fused to Metal (PFM) / 12 All Ceramic / 8 Learner Level 1 Mastery of Tooth Preparation Estimated Set Up Time: 30
More informationThe Attractive Glass Abutment System (ZX-27) HANDOUT
The Attractive Glass Abutment System () HANDOUT! " " # $ % $ # & ' ( ) FAQs New Solutions Pharmaceuticals Tel.: +971 6 7460661 Fax : +971 6 7460771 P.O.Box. 18161 Ajman - UAE e-mail : info@newsolutionsdl.com
More informationZIRCONIA INFORMATION FOR DENTISTS. FAQ S from the dental practice ENGLISH
ZIRCONIA INFORMATION FOR DENTISTS FAQ S from the dental practice ENGLISH Zr Facts and Answers 2 Facts and Answers What is Zirconia? Zirconium (ZrSiO ) belongs to the mineral group of silicates and 4 was
More informationA complete system geared to your success.
CAD/CAM SYSTEMS HANDPIECES HYGIENE SYSTEMS TREATMENT CENTRES IMAGING SYSTEMS CEREC AND inlab NEW PRODUCTS IN 2007 Dentistry at the turning point. CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS
More informationportion of the tooth such as 3/4 Crown, 7/8Crown.
Lecture.1 Dr.Adel F.Ibraheem Crown and Bridge: It s a branch of dental science that deals with restoration of damaged teeth with artificial crown replacing the missing natural teeth by a cast prosthesis
More informationCHAPTER 10 RESTS AND PREPARATIONS. 4. Serve as a reference point for evaluating the fit of the framework to the teeth.
CHAPTER 10 RESTS AND DEFINITIONS A REST is any rigid part of an RPD framework which contacts a properly prepared surface of a tooth. A REST PREPARATION or REST SEAT is any portion of a tooth or restoration
More informationDESS. Screws. Tijuana Ventas: (664) 685 6294/95 hirambogarin@dabocorp.com. For all major implant systems!! www.dabocorp.com
Screws Screws for definitive use. Made from medical grade 5 ELI Titanium Integrity and soundness guaranteed by stress tests of up to 150% of their nominal torques. Their designs ensure a perfect fit with
More informationAmerican Academy of Cosmetic Dentistry. Laboratory Technician Clinical Case Type II. One or Two Indirect Restorations
American Academy of Cosmetic Dentistry Laboratory Technician Clinical Case Type II One or Two Indirect Restorations AACD Member ID # 00000 EXAMPLE REPORT Treatment List #8, #9 All Ceramic Crowns Restorative
More informationVITA YZ T / VITA YZ HT Working Instructions
VITA YZ T / VITA YZ HT Working Instructions VITA Farbkommunikation VITA Farbkommunikation VITA shade determination VITA shade communication VITA shade reproduction VITA shade control Date of issue 08.15
More informationNew features DWOS 3.2
New features DWOS 3.2 Version 1.1 Septembre 13 th 2012 Summary This document describes how to use the new features and improvements of the release 3.2.0 of the Dental Wings Open Software (DWOS). Order
More informationporcelain fused to metal crown
Lectur.5 Dr.Adel F.Ibraheem porcelain fused to metal crown the most widely used fixed restoration,it is full metal crown having facial surface (or all surfaces) covered by ceramic material. It consist
More informationVITA ENAMIC for CEREC / inlab Working Instructions
Working Instructions VITA Farbkommunikation VITA Farbkommunikation VITA shade taking VITA shade communication VITA shade reproduction VITA shade control Date of issue: 05.13 VITA shade, VITA made. Table
More informationSeeing CAD/CAM in a new light.
CAD/ CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS CEREC NEW PRODUCTS 2009 Seeing CAD/CAM in a new light. T h e D e n t a l C o m p a n y Precision and simplicity redefined.
More informationIt s the Fuel For Your Success
It s the Fuel For Your Success Engineered For Success Today s patients demand aesthetic restorative outcomes that match or enhances their natural dentition. While this has traditionally been accomplished
More informationstone model bonding tray improve the accuracy
indirectbonding Bonding brackets to the patient s stone model and transferring the bonding tray to the patient s mouth Developed to improve the accuracy of bracket placement (especially premolars) advantagesdisadvantages
More informationSTEP-BY-STEP INSTRUCTIONS ON TEMPORARY ABUTMENTS. Straumann Temporary Abutments, VITA CAD-Temp
STEP-BY-STEP INSTRUCTIONS ON TEMPORARY ABUTMENTS Straumann Temporary Abutments, VITA CAD-Temp The ITI (International Team for Implantology) is academic partner of Institut Straumann AG in the areas of
More informationBiodenta CAD/CAM Case Report - Urs Brodbeck, DMD, Zurich, Switzerland. Monolithic Zirconia 12unit full-arch reconstruction
Biodenta CAD/CAM Case Report - Urs Brodbeck, DMD, Zurich, Switzerland Monolithic Zirconia 12unit full-arch reconstruction Clinician: Urs Brodbeck, DMD, Zurich / Switzerland Technicians: ARTECO Zurich,
More informationRemoving fixed prostheses using the ATD automatic crown and bridge remover
Removing fixed prostheses using the ATD automatic crown and bridge remover By Dr. Ian E. Shuman, Baltimore, MD. Information provided by J. Morita USA When removing cemented provisionals and final fixed
More informationProcedures & Products Powered by Procera. All-on-4
Procedures & Products Powered by Procera All-on-4 First from Nobel Biocare. NobelPerfect, (NP, RP, WP), NobelDirect (NP, RP, WP), Brånemark System, NobelReplace and NobelSpeedy Implants. A complete assortment
More informationContents. Cement retained restoration. Screw retained restoration. Overdenture retained restoration. TS Implant System. 70 ComOcta Gold Abutment
Contents TS Implant System Cement retained restoration Screw retained restoration 06 Cement-retained bridges with the Solid abutment system (non- 72 Screw retained crown with the ComOcta Gold abutment
More informationCementation and Sterilization Guidelines for Labs and Dentists. Lava. Zirconia for Implant Abutments. Cementation and Sterilization.
Cementation and Sterilization Guidelines for Labs and Dentists Lava Zirconia for Implant Abutments Cementation and Sterilization Made Easy Zirconia for Implant Abutments Use your 3M ESPE Lava Scan ST Design
More informationDigital impression solutions. 3M True Definition Scanner. Precise. impressions. in a jiffy
Digital impression solutions 3M True Definition Scanner Precise impressions in a jiffy True Definition Scanner Digital impressioning redefined Easy handling. Desired result. With the 3M True Definition
More informationTreatment planning for the class 0, 1A, 1B dental arches
Treatment planning for the class 0, 1A, 1B dental arches Dr.. Peter Hermann Dr Reminder: Torquing movement on tooth supported denture : no movement Class 1 movement in one direction (depression) Class
More informationProjecting a new smile from a facial photograph:
I special _ digital smile design Projecting a new smile from a facial photograph: A new way to plan multidisciplinarydental treatments Authors_ Drs Marco Del Corso, Italy, & Alain Méthot, Canada without
More informationGARDEN WINDOW GLAZING AND DE-GLAZING INSTRUCTIONS
GARDEN WINDOW GLAZING AND DE-GLAZING INSTRUCTIONS DE-GLAZING 1.) If there is any PVC cement covering the joints where external glazing bead strips meet, cut through the cement with a utility knife. 2.)
More informationState-of-the-art for your prostheses
WHERE CREATIVITY meets technology E CREATECH EXCELLENCE State-of-the-art technology for your prostheses 1 CREATECH EXCELLENCE What is createch Excellence? Createch Excellence is OUR RANGE OF SOLUTIONS
More informationSTEP BY STEP INSTRUCTIONS ON TEMPORARY ABUTMENTS. Straumann Temporary Abutments, VITA CAD-Temp
STEP BY STEP INSTRUCTIONS ON TEMPORARY ABUTMENTS Straumann Temporary Abutments, VITA CAD-Temp The ITI (International Team for Implantology) is academic partner of Institut Straumann AG in the areas of
More informationProcedures & Products. NobelEsthetics
Procedures & Products NobelEsthetics First from Nobel Biocare. NobelPerfect, (NP, RP, WP), NobelDirect (NP, RP, WP), Brånemark System, NobelReplace and NobelSpeedy Implants. A complete assortment with
More informationHealing Abutment Selection. Perio Implant Part I. Implant Surface Characteristics. Single Tooth Restorations. Credit and Thanks for Lecture Material
Healing Abutment Selection Perio Implant Part I Credit and Thanks for Lecture Material Implant Surface Characteristics!CAPT Robert Taft!CAPT Greg Waskewicz!Periodontal Residents NPDS and UMN!Machined Titanium!Tiunite!Osseotite
More informationáå`çêáë=qwf MOKOMNS kéï=~ë=çñw= båöäáëü
kéï=~ë=çñw= MOKOMNS áå`çêáë=qwf qê~åëäìåéåí=òáêåçåá~=åéê~ãáå=ääçåâë=~åç=ää~åâë=ñçê=`bob`=~åç=áåi~ä mêçåéëëáåö=áåëíêìåíáçåëw=oéëíçê~íáçå=éêççìåíáçå=ñçê=åêçïåë=~åç=äêáçöéë båöäáëü Translucent zirconium oxide
More informationVITABLOCS for CEREC /inlab Working Instructions
for CEREC /inlab Working Instructions VITA Farbkommunikation VITA Farbkommunikation VITA shade taking VITA shade communication VITA shade reproduction VITA shade control Date of issue: 03.14 VITA shade,
More informationAesthetics meets CAD/CAM in the dental surgery
62 EDI New state-of-the-art options for implant-supported restorations Aesthetics meets CAD/CAM in the dental surgery Dr Mathias Siegmund, M.Sc., Regensburg, Germany Thanks to the new Sub-Tec CAD/CAM TiBase
More informationATLANTIS abutments design guide CAD/CAM patient-specific abutments
ATLANTIS abutments design guide CAD/CAM patient-specific abutments Contents Introduction 4 This manual helps you to explore all the benefits of ATLANTIS CAD/CAM patient-specific abutments. It gives you
More informationRestoring Central Incisors
Restoring Central Incisors The Synergy and Pathway to Predictable Esthetics Ana L. Villagrana Serena Kurt, DDS Key Words: incisal length, lithium disilicate, reverse smile, indirect restorations, communication,
More informationall ceramic all options
all ceramic all options FULL CONTOUR CO ZIRCONIA Guidelines for dental technicians 5884 Zenostar Guideline Brochure V3.indd 1 7/19/13 9:56 AM Zenostar Full Contour Zirconia Restorations Your best option
More informationIncreasing. VDO and the Use of CAD/CAM. Prosthodontic Principles and the Full-Mouth Reconstruction. 86 Summer 2013 Volume 29 Number 2
Increasing VDO and the Use of CAD/CAM Prosthodontic Principles and the Full-Mouth Reconstruction Jonathan L. Ferencz, DDS, FACP Abstract This article describes the treatment of a young adult female with
More informationCeramics on Implants Fixed Zirconium Dioxide-Based Restorations in the Rehabilitation of the Edentulous upper Jaw
38 STARGET 1 I 11 ceramic restorations arne F. BOEcklER and MIcHaEl seitz Ceramics on Implants Fixed Zirconium Dioxide-Based Restorations in the Rehabilitation of the Edentulous upper Jaw Introduction
More informationBASIC INFORMATION ON THE STRAUMANN VARIOBASE ABUTMENT. Straumann Variobase Abutment
BASIC INFORMATION ON THE STRAUMANN VARIOBASE ABUTMENT Straumann Variobase Abutment 1 The ITI (International Team for Implantology) is academic partner of Institut Straumann AG in the areas of research
More informationCAD/CAM Anterior and Posterior Implant Restorations: Ceramics, Abutments and Design
CAD/CAM Anterior and Posterior Implant Restorations: Ceramics, Abutments and Design Fabrication and design of implant abutments has been previously published. REF1,2 Using Cad/Cam software to design the
More informationPureForm Ceramic System. Emulating nature. The perfect disguise.
PureForm Ceramic System Emulating nature. The perfect disguise. The new shape of ceramics. The PureForm Ceramic System is offered in six configurations which are designed according to four basic tooth
More informationDental Bridges. What are they? What are the parts of a typical dental bridge (fixed)? When are dental bridges needed?
Dental Bridges What are they? Dental bridges are false teeth anchored on neighbouring teeth in order to replace one or more missing teeth. The false tooth is known as a pontic and is fused in between two
More informationOctober 29, 2015. Dear Ms. Hartnett:
DEPARTMENT OF HEALTH & HUMAN SERVICES Public Health Service Food and Drug Administration 10903 New Hampshire Avenue Document Control Center WO66-G609 Silver Spring, MD 20993-0002 October 29, 2015 Ivoclar
More informationComposite artistry- speedy mock up
Case Report: Composite artistry- speedy mock up Dr.Shikha Kanodia*, Dr.Manjit Kaur**, Dr.Girish J. Parmar*** * Asst. Professor, **Post Graduate Part 3, ***Head and Dean, Department of Conservative Dentistry
More informationDLT 123 CROWN AND BRIDGE
DLT 123 CROWN AND BRIDGE COURSE DESCRIPTION: Prerequisites: DLT 111 and DLT 114 Corequisites: None This course introduces techniques for fabricating cast gold restorations. Topics include infection control,
More informationCAD/CAM MATERIAL. ALL FROM ONE SOURCE.
CAD/CAM MATERIAL. ALL FROM ONE SOURCE. SIRONA.COM 02 I 03 PRACTICAL EXPERIENCE. HARD TO BEAT. CEREC and inlab milling units from Sirona guarantee the economic and precise production of clinically sound
More informationVITA SUPRINITY Working Instructions
VITA SUPRINITY Working Instructions VITA Farbkommunikation VITA Farbkommunikation VITA shade taking VITA shade communication VITA shade reproduction VITA shade control Date of issue: 11.13 VITA shade,
More informationBuild-up System. Color-Chart
Firing Schedule for VINTAGE Build-up System Porcelain System Opal Incisal Body Preheating ( C) Drying (min) Vacuum Incr. tem- Vacuum Final perature final tem- tem( C/min) perature perature Holding time
More informationTerms and conditions for teeth whitening offers
Terms and conditions for teeth whitening offers 1. You can only make an informed decision once you have read and understood all the information provided by us in the following documents: a. Terms and conditions
More informationTelescopic Denture A Treatment Modality for Minimizing the Conventional Removable Complete Denture Problems: A Case Report
Dentistry Section Case Report ID: JCDR/2012/3886:2351 Telescopic Denture A Treatment Modality for Minimizing the Conventional Removable Complete Denture Problems: A Case Report Kunwarjeet Singh, Nidhi
More informationWoodlake Dental s Tray set up A Guide on How to Prepare Dental Procedure Trays.
Woodlake Dental s Tray set up A Guide on How to Prepare Dental Procedure Trays. Woodlake Dental A Quick Reference Guide. 6735 FM 78, # 101, San Antonio, TX 78244 Phone:(210) 661-6200 Publication date:
More informationStraumann Dental Implant System. Fax Order Form Collection.*
Straumann Dental Implant System. Fax Order Form Collection.* * The NNC Fax Order Form is still a stand alone document due to the unique restorative portfolio Straumann Roxolid SLActive Tissue Level Implants
More informationManaging worn teeth with composites
6 Managing worn teeth with composites Clinical details A 50-year-old man presents to you complaining about his worn teeth and would like the appearance improved (Fig. 6.1). He complains of regurgitation
More informationeverstick everstick fibre reinforcements in orthodontics Clinical Guide Reliable anchorage Aesthetic retention www.sticktech.com everstick ORTHO
everstick Clinical Guide www.sticktech.com everstick A&O everstick ORTHO everstick fibre reinforcements in orthodontics Reliable anchorage Aesthetic retention everstick A&O everstick ORTHO everstick A&O
More informationA collection of pus. Usually forms because of infection. A tooth or tooth structure which is responsible for the anchorage of a bridge or a denture.
Abscess A collection of pus. Usually forms because of infection. Abutment A tooth or tooth structure which is responsible for the anchorage of a bridge or a denture. Amalgam A silver filling material.
More informationIn Class IV arch: Fulcrum line passes through two abutments adjacent to single edentulous space.
It is that part of removable partial denture which assists the direct retainers in preventing displacement of distal extension denture bases by resisting lever action from the opposite side of the fulcrum
More informationDental Intelligence. dd TECHNIQUE. The Material. First Experiences with the One Body System IQ from GC
First Experiences with the One Body System IQ from GC Dental Intelligence An article by Michael Brüsch, MDT, Düsseldorf, Germany High quality is not enough anymore; price is ruling the market. Such circumstances
More informationAnother Implant Option for Missing Teeth with Challenging Symmetry Patrick Gannon, DDS and Luke Kahng, CDT
Another Implant Option for Missing Teeth with Challenging Symmetry Patrick Gannon, DDS and Luke Kahng, CDT Introduction A 58 year old male had been missing teeth #7=12 for approximately 28 years. During
More informationCAD/CAM. Solutions flexible, economical, future-proof
CAD/CAM Solutions flexible, economical, future-proof What would you like to use CAD/CAM solutions for today and tomorrow? Custom abutments Crown and bridge restorations Segments within prosthetics in the
More informationPrecise. Powerful. Pure.
DATRON D1pure 2 Precise. Powerful. Pure. 3 DATRON Worldwide references p. 32 DATRON DentalCAM p.20 Scanners p.28 CAD p.28 4 Dental materials and Dental milling tools p. 24 DATRON D1 pure p. 7 We Understand
More informationZirconium Abutments for Improved Esthetics in Anterior Restorations
Zirconium Abutments for Improved Esthetics in Anterior Restorations by Luke S., C.D.T. Mr. is the founder and owner of Capital Dental Technology Laboratory, Inc., in Naperville, Illinois. The laboratory
More informationRestorative Guidelines
Restorative Guidelines Contents Restorative Guidelines 4.1 Neoss Implant System 4.2 4.2 Esthetiline Solution 4.3 4.3 Provisional Abutments 4.8 4.4 Impression Techniques Implant Level 4.12 4.5 NeoLink
More informationStructur 3. Gloss without polishing. Structur 3. Composite material for the fabrication of
Composite material for the fabrication of temporary crowns and bridges Gloss without polishing 3 for temporary crowns and bridges with a sheen is a self-polymerising composite material for the fabrication
More informationStandard Test Procedures Manual
STP 206-4 Standard Test Procedures Manual Section: 1. SCOPE 1.1. Description of Test This method describes the procedure for determining the liquid limit, plastic limit and the plasticity index of coarse-grained
More informationTooth preparation J. C. Davenport, 1 R. M. Basker, 2 J. R. Heath, 3 J. P. Ralph, 4 P-O. Glantz, 5 and P. Hammond, 6
12 5 Tooth preparation J. C. Davenport, 1 R. M. Basker, 2 J. R. Heath, 3 J. P. Ralph, 4 P-O. Glantz, 5 and P. Hammond, 6 This final article in the series describes the modification of teeth to improve
More informationFORD DENTAL COVERAGE
FORD DENTAL COVERAGE HOW DENTAL COVERAGE WORKS The Trust provides dental coverage to you and your eligible Dependents. A Dental Benefits Manager, Delta Dental of Michigan, whose contact information is
More informationDo s and Don ts of Porcelain Laminate Veneers
Do s and Don ts of Porcelain Laminate Veneers Chad J. Anderson, MS, DMD; Gerard Kugel, DMD, MS, PhD; Shradha Sharma, BDS, DMD Continuing Education Units: 2 hours Online Course: www.dentalcare.com/en-us/dental-education/continuing-education/ce333/ce333.aspx
More informationPROSTHETIC PROCEDURE. for HG IMPLANT SYSTEM
PROSTHETIC PROCEDURE for HG IMPLANT SYSTEM PROSTHETIC PROCEDURE for HG IMPLANT SYSTEM HG Implant System Contents Cement retained restoration Rigid abutment When abutment reduction is unnecessary When abutment
More informationReplacement of Missing Teeth with Fixed Prostheses KEN HEMMINGS AND ZOE HARRINGTON
R E S T O R A T I V E RESTORATIVE D E N T I S T R Y DENTISTRY Replacement of Missing Teeth with Fixed Prostheses KEN HEMMINGS AND ZOE HARRINGTON Abstract: This article explores the various treatment options
More informationPRESS. Pressable Ceramic System. Perfect shades first time every time. Instruction Manual. Products for better dentistry
Pressable Ceramic System PRESS Perfect shades first time every time Instruction Manual Products for better dentistry Pressable Ceramic Pressable Ceramic System PRESS Perfect shades first time every time
More informationHandbook. Your guide to the Alberta Blue Cross. Dental Schedule
Dental Handbook 2016 Your guide to the Alberta Blue Cross Dental Alberta Blue Cross Dental : 2016 Helping you keep your healthy smile About the schedule January 2016 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
More informationOptimet 3D Dental Multi-Facet Scanner Attainable Accuracy for Dental Application Cases
Optimet 3D Dental Multi-Facet Scanner Attainable Accuracy for Dental Application Cases Optimet Dental 3D Scanner This paper presents an overview of the Optimet multi-facet Dental Scanner used for 3D scanning
More informationDENTAL ADVANTAGE HELPFUL HINTS FOR THE RDA PRACTICAL EXAM
DENTAL ADVANTAGE HELPFUL HINTS FOR THE RDA PRACTICAL EXAM 1. Arrive early for the exam. Bring with you: *lab coat *protective eyewear *gloves *mask *optional flashlight and watch *deposit for rental kit
More informationADA Insurance Codes for Laboratory Procedures:
ADA Insurance Codes for Laboratory Procedures: Inlay/Onlay Restorations D2510 Inlay - metallic - one surface D2520 Inlay - metallic - two surfaces D2530 Inlay - metallic - three or more surfaces D2542
More informationProcessing instructions Everest ZS-Blank. Always be on the safe side.
Processing instructions Everest ZS-Blank Always be on the safe side. Distributed by: KaVo Dental GmbH Bismarckring 39 D-88400 Biberach Tel. +49 7351 56-0 Fax +49 7351 56-1488 Manufacturer: Kaltenbach &
More informationManaging a Case of Sensitive Abutment Situations through Use of a Fixed Movable Prosthesis A Clinical Report
www.jmscr.igmpublication.org Managing a Case of Sensitive Abutment Situations through Use of a Fixed Movable Prosthesis A Clinical Report Authors Khurshid A. Mattoo 1, Shailesh Jain 2 1 Assistant Professor,
More informationClinical randomized controlled study of Class II restorations of a highly filled nanohybrid resin composite (4U)
215-3-3 Clinical randomized controlled study of Class II restorations of a highly filled nanohybrid resin composite () One year report JWV van Dijken, Professor Director Clinical Research Biomaterial Research
More informationImplants in your Laboratory: Abutment Design
1/2 point CDT documented scientific credit. See Page 41. Implants in your Laboratory: Abutment Design By Leon Hermanides, CDT A patient s anatomical limitations have the greatest predictive value for successful
More information