Before you start, you should prepare the following items



Similar documents
Before you start, you should prepare the following items

Please prepare the following items

Please prepare the following items

Installation. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem.

Turn on all of your network devices and then check to see if the LEDs on the Access Point display normally as the diagram below describes.

Installation. The product model shown in this QIG is TD-W8951ND, as an example.

Note The product model shown in this QIG is TD-8817, as an example.

Turn off all of your network devices, including your computer, Modem and the Router.

Turn off all of your network devices, including your computer, Modem and the Router.

Installation. Note Please use only wired network connections to configure the router.

Before you start, you should prepare the following items

If no telephone is needed, please connect the LINE port of the Modem Router to the wall jack using the telephone line directly.

Please use only wired network connections to configure the Router.

Installation. The product model shown in this QIG is TD-W8961ND, as an example.

Assign a static IP address for your computer. Please refer to the T3 in Troubleshooting guide if you need assistance.

Assign a static IP address for your computer. Please refer to the T3 in Troubleshooting guide if you need assistance.

Please use only wired network connections to configure the router.

TL-PS310U Single USB 2.0 Port MFP and Storage Server

Installation. Note The product model shown in this QIG is TD-W8951ND, as an example.

TP-LINK TD-W8901G. Wireless Modem Router. Advanced Troubleshooting Guide

Installation Guide. Wireless N Gigabit Access Point EAP120 / EAP220

TL-PS310U Single USB 2.0 Port MFP and Storage Server

Assign a static IP address ( ) for your computer. Please refer to T3 in Troubleshooting guide on page 10 if you need assistance.

CANON FAX L360 SOFTWARE MANUAL

ENPS-MF1. 1 USB Port. Multifunctional Print Server. Quick Installation Guide V1.0

Print Server Application Guide. This guide applies to the following models.

Option nv, Gaston Geenslaan 14, B-3001 Leuven Tel Fax Page 1 of 14

TE100-P21/TEW-P21G Windows 7 Installation Instruction

Enterprise Networking Solution. Installation Guide. Load Balance Broadband Router TL-R480T+

Print Server Application Guide

LPT1 Printer Connector. External Power Supply Connector Power Indicator

CMP-102U. Quick Installation Guide

How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows?

1. Hardware Installation

Enterprise Networking Solution. Installation Guide. 10/100Mbps Unmanaged Switch TL-SF1016DS/TL-SF1016 TL-SF1024D/TL-SF1024 TL-SF1048

Operating Instructions Driver Installation Guide

1-Port Wireless USB 2.0 Print Server Model # APSUSB201W. Quick Installation Guide. Ver. 2A

Installing Your Printer to the Network for the First Time

HL2170W Windows Network Connection Repair Instructions

Installation Guide Wireless 4-Port USB Sharing Station. GUWIP204 Part No. M1172-a

AXIS 1440 Print Server For EPSON Printers: Product Update. Important Information for Windows

Installing the Microsoft Network Driver Interface

Network Printing In Windows 95/98/ME

This document will show you how to set up the Hotwire 6205 ADSL Modem, and how to customize its configuration to get the most out of this product.

Software Installation Guide

Brady IP Printer Installation Instructions

Software Installation Guide

FedEx Ship Manager Software. Installation Guide

Network Setup Guide. Introduction. Setting up for use over LAN

User Manual - Secure Lock Ware

USER GUIDE. Ethernet Configuration Guide (Lantronix) P/N: Rev 6

Omni 56K USB Lite Quick Start Guide

DataSuite Installation and Activation Guide

Driver Upgrade Instructions

1 Warrior Software Installation

Windows 98 and Windows Me

Installing Your Printer to Your Network for the First Time

CNR-BTU5 Bluetooth Dongle

User s Manual. Copyright 2010 Vantec Thermal Technologies. All Rights Reserved.

PP8X Printer Driver Installation Instruction

HP-1000 Powerline USB Adapter

HP-1000 Powerline Ethernet Adapter

Installing Your Multifunction to Your Network for the First Time

Agilent N5970A Interactive Functional Test Software: Installation and Getting Started

Installing Your Printer to Your Network for the First Time

EntraPass WebStation. Installation Manual DN

FMAudit Agent Install Guide

Ethernet Interface Manual Thermal / Label Printer. Rev Metapace T-1. Metapace T-2 Metapace L-1 Metapace L-2

OSM 2007 MONITORING SOFTWARE

TRENDnet. <a trendnet.com"> Quick Installation Guide. Product Warranty Registration

Windows Vista / Windows 7 Installation Guide

Copying Files to a Flash Drive or SD Card:

Getting the most from your Maxtor OneTouch TM USB hard drive and Linksys Network Storage Link

Installing Your Multifunction to Your Network for the First Time

Applies to: F1PG200ENau Belkin Analogue Telephone Adapter (ATA) Firmware release notes

1-port USB 2.0 Print Server. Manual (GPSU21)

Keri USB-A Connection and Configuration

How To Use Allnet Configuration Utility On A Pc Or Mac Or Ipad (Powerline) With A Powerline (Powerbook) With Powerline 2.5 (Powerbee) With An Ipad Or Powerplug (Powerplug) With

Installation Guide. Your FedEx Ship Manager system number. Before you start

Installing Your Multifunction to Your Network for the First Time

The FlexiSchools Online Order Management System Installation Guide

Fusion. User s Guide: Updating the Fusion s Image

How to setup a VPN on Windows XP in Safari.

1. Do I need to upgrade my Broadband at Home modem firmware?

Installing Your Multifunction to Your Network for the First Time

Release Notes: PowerChute plus for Windows 95 and Windows 98

Section 5: Installing the Print Driver

ScanShell.Net Install Guide

Installation Guide E Dielectric Probe Kit 85071E Materials Measurement Software

Chapter 1 Configuring Basic Connectivity

MFC8890DW Vista Network Connection Repair Instructions

Prestige 623R-T. Quick Start Guide. ADSL Dual-link Router. Version 3.40

BioWin Network Installation

The FlexiSchools Online Order Management System Installation Guide

TR-3 Channel Editor. Software Manual

Colorfly Tablet Upgrade Guide

Transcription:

Before you start, you should prepare the following items Windows XP/Vista/7/8 computer with print server setup CD One USB device with USB port Hardware Installation 1. Turn off the USB device s power. 2. Connect your USB device to the TL-PS310U. 3. Connect the TL-PS310U to the router or switch/hub with the Ethernet cable. 4. Connect the power adapter to the TL-PS310U. When the Link LED lights up, the TL-PS310U is correctly connected to the network. Factory Default Settings IP address: 192.168.0.10/255.255.255.0 Password: The TL-PS310U does not come with a default password. 1

Insert the setup CD into your CD-drive. The auto-run program will be started. Select TL-PS310U Choose your operating system to install all software programs. When the installation completed, please DO restart your computer. Restart your computer 2

On your desktop you will see a new icon, double-click the icon and it will bring up the MFP and Storage Server setup utility. In this screen, you will see the product listed as TL-PS310U XXXXXX (192.168.0.10). If your computer is not in the 192.168.0.x network segment, it ll tell you that the TL-PS310U is in different network segment. In this situation, you need to change the IP of the TL-PS310U. Select the print server, right-click on it and select Server Configurations 3

Configure the IP address of the print server according to your network, and then click Set Open the above Server Configurations screen again and click Restart Server, so that you can apply the IP configuration. The IP address has been changed 4

The MFP and Storage Server will auto-detect the USB device connecting to the USB port of the TL-PS310U. Connecting to a USB Printer Select the USB printer you want to connect and click Connect Device Because the Disconnect Printer when Idle option is enabled by default, the server will tell you this. Just click OK You can disable the Disconnect Printer when Idle in the Options menu. The windows will detect the printer and install its driver automatically 5

After the driver is installed, the printer will be in your system After finish installing the printer driver, please disconnect the printer manually. And then right-click the printer icon, you can use the Connect Automatically for Printing function. You re highly recommended to use this function for printing. Enable the Connect Automatically for Printing function 6

Connecting to a USB Drive It s the same as you connect the printer on the MFP and Storage Server. Select the USB drive you want to connect and click Connect Device After the driver is installed, the Removable Disk will be in your system If you connect the USB devices all the time, other users can t connect and use them. A recommended habit is disconnecting the USB devices when you don t use them. 7

Disconnect manually Select the USB device and click Disconnect Device Disconnect when Idle On the top menu, click Options, the Disconnect Storage Device When Idle and Disconnect Printer When Idle are on the list 8

Technical Support For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/en/support/download For all other technical support, please contact us by using the following details: Global Tel: +86 755 2650 4400 Fee: Depending on rate of different carriers, IDD. E-mail: support@tp-link.com USA/Canada Toll Free: +1 866 225 8139 E-mail: support.usa@tp-link.com(usa) support.ca@tp-link.com(canada) Turkey Tel: 0850 7244 488 (Turkish Service) E-mail: support.tr@tp-link.com Service time: 09:00 to 21:00, 7 days a week Ukraine Tel: 0800 505 508 Fee: Free for Landline; Mobile: Depending on rate of different carriers E-mail: support.ua@tp-link.com Service time: Monday to Friday, 10:00 to 22:00 Brazil Toll Free: 0800 608 9799 (Portuguese Service) E-mail: suporte.br@tp-link.com Service time: Monday to Friday, 09:00 to 20:00; Saturday, 09:00 to 15:00 Indonesia Tel: (+62) 021 6386 1936 E-mail: support.id@tp-link.com Service time: Sunday to Friday, 09:00 to 12:00, 13:00 to 18:00 *Except public holidays Australia/New Zealand Tel: NZ 0800 87 5465 (Toll Free) AU 1300 87 5465 (Depending on 1300 policy.) E-mail: support.au@tp-link.com (Australia) support.nz@tp-link.com (New Zealand) Germany/Austria Tel: +49 1805 875 465 (German Service) +49 1805 TPLINK +43 820 820 360 Fee: Landline from Germany: 0.14EUR/min. Landline from Austria: 0.20EUR/min. E-mail: support.de@tp-link.com Service time: Monday to Friday, 09:00 to 12:30 and 13:30 to 18:00. GMT+1 or GMT+2 (DST in Germany) *Except bank holidays in Hesse Singapore Tel: +65 6284 0493 E-mail: support.sg@tp-link.com UK Tel: +44 (0) 845 147 0017 Fee: Landline: 1p-10.5p/min, depending on the time of day. Mobile: 15p-40p/min, depending on your mobile network. E-mail: support.uk@tp-link.com Italy Tel: +39 023 051 9020 E-mail: support.it@tp-link.com Service time: Monday to Friday, 09:00 to 13:00; 14:00 to 18:00 Malaysia Toll Free: 1300 88 875 465 Email: support.my@tp-link.com Poland Tel: +48 (0) 801 080 618 +48 223 606 363 (if calls from mobile phone) E-mail: support.pl@tp-link.com Service time: Monday to Friday, 09:00 to 17:00. GMT+1 or GMT+2 (DST) France Tel: 0820 800 860 (French service) Fee: 0.118 EUR/min from France Email: support.fr@tp-link.com Service time: Monday to Friday, 09:00 to 18:00 *Except French Bank holidays Switzerland Tel: +41 (0) 848 800 998 (German Service) Fee: 4-8 Rp/min, depending on rate of different time. E-mail: support.ch@tp-link.com Service time: Monday to Friday, 09:00 to 12:30 and 13:30 to 18:00. GMT+1 or GMT+2 (DST) Russian Federation Tel: 8 (499) 754 5560 (Moscow NO.) 8 (800) 250 5560 (Toll-free within RF) E-mail: support.ru@tp-link.com Service time: From 09:00 to 21:00 (Moscow time) *Except weekends and holidays in RF