Broadcast Antenna Systems for FM, TV, MMDS, DAB and DVB

Broadcast Antenna Systems for FM, TV, MMDS, DAB and DVB

Photo on title page: Antenna System with 12 bays for DVB-T. Catalogue Issue 6/27 Kathrein Plant IV near Rosenheim, Germany

Kathrein Broadcast Antennas Kathrein is one of the world s leading manufacturers of professional broadcast antenna systems, including a full range of transmitting antennas for FM, TV, MMDS, DAB and DVB broadcasting. KATHREIN-Werke KG was founded in 1919 in Rosenheim, Germany, to produce antennas and lightning protection equipment. Since 1955 Kathrein has been supplying professional antenna systems of all sizes to broadcasters in every part of the world, from Canada to China and from Norway to South Africa. Right from the start Kathrein has maintained a high level of engineering capability. Today there is a team of antenna and mechanical engineers dealing exclusively with broadcast transmitting antennas. This highly qualified engineering team is responsible for: Design of components (antennas, power splitters, etc.). Design and optimization of complete antenna systems. Installation and testing of antenna systems. Project management. Kathrein can provide turn-key installations in cooperation with other contractors or using the customer s installation personnel. Customers are welcome to take advantage of the technical expertise available from Kathrein and to discuss their specific requirements. If your needs cannot be met with our standard components we are prepared to develop special solutions for you. Kathrein s quality management system is certified in accordance with ISO 91, which includes not only all manufacturing operations, but also design processes. Quality leads the way As the world s oldest and largest antenna manufacturer, we live up to our claim Quality leads the way on a daily basis. One of the fundamental principles is to always be on the lookout for the best solution for our customer. Our quality assurance system and our environmental management system apply to the entire company and are certified by TÜV according to EN ISO 91 and EN ISO 141.

Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 19-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The maximum wind velocities listed should be understood in the sense of working values according to DIN and EN standards. These values include a safety factor below the ultimate limit state (elastic limit or permanent deformation). For these wind velocities we guarantee the mechanical safety and the electrical integrity of our antennas. 4

Band I (VHF) Antenna Systems 47... 88 MHz Band I (VHF) Antennas 47... 88 MHz Antenna Systems The antenna systems listed are examples of typical configurations. The mechanical and electrical data can be used to estimate gain, size and mechanical loads of a system. The final configuration and technical data of an individually designed antenna system, meeting the customer s specific needs, will be determined by the Kathrein engineers. Antennas, Power Splitters and Accessories The basic antennas and related components shown in this catalog are only a small portion of the Kathrein broadcast product line. Many special versions are available, with different connectors, higher power ratings, and other features such as special probes or extra ice protection. Your enquiries are most welcome and we would like to discuss your special requirements. Band II (FM) Antenna Systems 87.5 18 MHz Band II (FM) Antennas 87.5 18 MHz Band III (VHF) Antenna Systems 174 2 MHz Band III (VHF) Antennas 174 2 MHz Band IV/ V (UHF) Antenna Systems 47 862 MHz Band IV/ V (UHF) Antennas 47 862 MHz L Band Antenna Systems 1452 1492 MHz L Band Antennas 1452 1492 MHz MMDS 25 27 MHz Relay Receiving Antennas and Special Antenna Systems Power Splitters Further Components Technical Annex

Summary of Types The articles are listed by type number in numerical order. Type No. Page Type No. Page Type No. Page Type No. Page 715... 75 16 18 751 1282 144 764 487 14 715 22 94 75 162 19 751 128 144 764 488 14 715 849 6 75 182 1 764 489 14 75 18 1 752... 764 491 14 72... 75 185 7 752 18 8 764 49 14 72 19 157 75 186 45 764 494 14 72 27 157 75 194 128 754... 764 495 14 754 154 4 764 496 14 74... 75 11.. 764 497 14 74 6 157 75 1112 11 755... 764 499 14 74 61 157 75 111 11 755 587 4 74 62 157 75 1114 11 765... 74 6 157 75 1115 11 757... 765 57 12 74 64 157 75 1116 11 757 629 4 765 814 14 74 65 157 75 1117 11 765 815 14 75 1118 11 759... 765 816 14 75 1.. 75 112 111 759 44 158 765 817 14 75 18 8 75 1122 111 759 122 117 765 818 14 75 112 1 75 1124 111 759 1851 116 765 819 14 75 11 1 75 1125 111 759 14152 118 765 82 14 75 116 12 75 1128 11 765 821 14 75 117 12 75 11 112 761... 765 822 14 75 122 44 75 111 112 761 27 15 765 82 14 75 12 44 75 112 112 765 824 14 75 125 82 75 118 4 762... 765 825 14 75 126 82 75 119 127 762 19 4 765 826 14 75 11 12 75 1191 127 762 94 5 765 827 14 75 12 12 75 1194 128 765 828 14 75 1 75 76... 765 829 14 75 14 51 751... 76 715 5 75 15 51 751 1215 145 766... 75 145 11 751 1216 145 764... 766 9 12 75 146 11 751 1217 145 764 485 14 766 94 12 75 147 11 751 1281 144 764 486 14 766 96 1 6

Summary of Types The articles are listed by type number in numerical order. Type No. Page Type No. Page Type No. Page Type No. Page 766 97 1 768 1 144 77 518 14 772 999 1 766 98 1 768 2 144 77 519 14 766 4 1 768 144 77 52 14 77... 766 41 1 768 4 144 77 521 14 77 1 766 42 1 768 5 144 77 652 121 77 2 1 766 44 1 768 6 144 77 65 124 77 1 766 45 1 768 4 144 77 721 129 77 61 8 766 46 1 768 41 144 77 722 129 77 64 7 766 614 84 768 42 144 77 72 12 768 4 144 77 7 12 774... 767... 768 44 144 77 776 49 774 8 95 767 6 16 768 45 144 77 777 49 774 9 95 767 141 7 768 476 41 77 79 12 774 4 95 767 194 12 768 494 75 77 794 12 774 41 95 767 195 12 77 795 12 774 46 95 767 196 12 769... 77 881 16 774 47 95 767 198 1 769 6 8 77 947 122 774 52 96 767 199 1 769 71 99 77 948 12 774 21 7 767 2 1 767 22 1 77... 771... 775... 767 2 1 77 144 14 771 8 1 775 5 767 24 1 77 145 14 771 4 17 775 1 5 767 26 1 77 146 14 771 87 129 775 2 5 767 27 1 77 147 14 771 917 126 775 1 5 767 28 1 77 148 14 775 78 48 767 2 12 77 149 14 772... 775 88 48 767 21 12 77 51 14 772 1 125 775 861 17 767 22 12 77 511 14 772 5 9... 767 24 12 77 512 14 772 51 9 767 25 12 77 51 14 772 52 9 767 26 12 77 514 14 772 549 1 77 515 14 772 55 1 768... 77 516 14 772 899 81 768 72 77 517 14 772 9 81 7

Summary of Types The articles are listed by type number in numerical order. Type No. Page Type No. Page Type No. Page Type No. Page 776... K 52 1 188 6 K 61 14 1 155 K 7... 776 12 15 K 52 1 51 71 K 61 14 2 155 K 7 1 41 98 776 15 14 K 52 1 57 71 K 61 14 155 K 7 1 47 98 776 64 8 K 52 1 81 7 16 K 61 14 4 155 776 165 97 K 52 1 82 7 16 K 61 14 5 155 776 166 97 K 52 1 8 7 16 K 61 15 11 156 776 167 97 K 52 1 84 7 16 K 61 15 12 156 776 168 97 K 52 1 85 7 16 K 61 15 1 156 776 22 97 K 52 1 86 7 16 K 61 15 21 156 776 2 97 K 52 57 67 K 61 15 22 156 K 52 58 67 K 61 15 2 156 K 52... K 52 4 17 8 K 61 15 1 156 K 52 7 517 78 K 52 4 517 69 K 61 15 2 156 K 52 7 527 78 K 52 4 527 69 K 61 15 156 K 52 7 57 78 K 52 4 81 7 17 K 61 15 41 156 K 52 14 17 47 K 52 4 82 7 17 K 61 15 42 156 K 52 14 517 77 K 52 4 8 7 17 K 61 15 4 156 K 52 14 527 77 K 52 4 84 7 17 K 61 15 52 156 K 52 16 81 7 18 K 52 4 85 7 17 K 61 15 61 156 K 52 16 82 7 18 K 52 4 86 7 17 K 61 15 62 156 K 52 16 8 7 18 K 52 4 17 46 K 61 16 1 158 K 52 16 84 7 18 K 52 4 517 74 K 61 16 2 158 K 52 16 85 7 18 K 52 4 527 74 K 61 1 155 K 52 16 86 7 18 K 61 2 155 K 52 17 517 76 K 5... K 52 17 527 76 K 5 2 187 42 K 72... K 52 17 57 76 K 5 2 188 42 K 72 2 41 15 K 52 22 17 52 K 5 57 68 K 72 2 47 15 K 52 22 51 79 K 5 58 68 K 72 1 47 94 K 52 22 57 79 K 72 1 57 14 K 52 57 66 K 61... K 72 6 41 9 K 52 58 66 K 61 12 158 K 72 6 47 9 K 52 1 187 6 K 61 1 158 8

Systems 47... 88 MHz Antenna Systems 47... 88 MHz 9

TV Transmitting Antenna with dipole panels K 52 1 8.. 47 88 MHz Antenna array of dipole panels K 52 1 8.. for different radiation patterns, especially suitable for mounting on square masts. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. One channel in Band I (47 88 MHz) s < 1.5 in one channel 5 Ω Horizontal Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional, directional or custom-designed. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h H S No. of Panels Gain* Weight in kg (without mounting hardware) Windload in kn (16 km/h) Antenna height H in m (Spacing S in m) bays per in Frequency in MHz Frequency in MHz Frequency in MHz bay 47 54 54 61 6 68 66 72 76 82 82 88 47 54 54 61 6 68 66 72 76 82 82 88 47 54 54 61 6 68 66 72 76 82 82 88 2 4 2 4 2 4 2 4 5 6 2 4 5 6 2 4 5 6 2 5.4 28 25 22 2 19 18 4..5..2 2.8 2.6 1.5 45 4 5 2 6. 5. 5. 4.8 4.2.9 4.5 4..6. 2.9 2.7 4 2. 62 54 46 44 42 4 7. 6.5 6. 5.9 5. 4.8 2 8.4 62 54 46 44 42 4 8. 7. 6.5 6. 5.6 5.2 2 6.6 95 84 75 7 66 6 12. 1.6 1. 9.6 8.5 7.8 1.9 9.6 8.6 8. 7. 6.5 4 5. 125 11 97 9 85 8 14.5 1. 12. 11.8 1.5 9.5 (6.4) (5.6) (5.) (4.7) (4.1) (.8) 2 11.5 125 11 97 9 85 8 16. 14. 1. 12.6 11.2 1.4 4 9.6 175 155 148 16 1 125 24. 21.2 2. 19.2 17. 15.6 2.7 2.8 18.6 17.4 15.2 14.1 4 8.1 25 22 196 18 171 16 29. 26. 24. 2.6 21. 19. (6.4) (5.6) (5.) (4.7) (4.1) (.8) 2 1. 175 155 148 16 1 125 24.1 21. 19.5 18.9 16.8 15.6 6 11.4 277 245 22 2 19 182 6. 1.8. 28.8 25.5 2.4 6.5 2. 28.6 26.7 2. 21.7 4 9.9 7 26 292 27 255 242 4.6 9. 6. 5.4 1.5 28.5 (6.4) (5.6) (5.) (4.7) (4.1) (.8) 2 14.5 25 22 196 18 171 16 2.1 28. 26. 25.2 22.4 2.8 8 12.6 7 26 292 27 255 242 48.1 42.4 4. 8.4 4. 1.2 49. 4.2 8.6 6.1 1.5 29. 4 11.1 492 45 9 56 7 2 58.1 52. 48. 47.2 42. 8. (6.4) (5.6) (5.) (4.7) (4.1) (.8) * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 1

TV Transmitting Antenna with dipole panels K 52 1 8.. 47 88 MHz Systems 47... 88 MHz Horizontal Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Equal power splitting E rel 1, 2 bays,5 1 2 α 4 E rel 1, 4 bays,5 1 1 1 2 α 4 Equal power splitting Different power splitting 4/1 P 1, 6 bays 1/1 P E rel,5 1/1 P 4/1 P 1 2 α 4 1, 8 bays E rel,5 1 1 1 2 α 4 *) without null fill with null fill and beam tilt 11

TV Transmitting Antenna with dipole panels K 52 4 8.. 47 88 MHz Antenna array of dipole panels K 52 4 8.. for different radiation patterns, especially suitable for mounting on triangular or round masts. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. One channel in Band I (47 88 MHz) s < 1.5 in one channel 5 Ω Horizontal Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional, directional or custom-designed. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h H S No. of Panels Gain* Weight in kg (without mounting hardware) Windload in kn (16 km/h) Antenna height H in m (Spacing S in m) bays per in Frequency in MHz Frequency in MHz Frequency in MHz bay 47 54 54 61 6 68 66 72 76 82 82 88 47 54 54 61 6 68 66 72 76 82 82 88 47 54 54 61 6 68 66 72 76 82 82 88 2 4 2 4 2 4 2 4 5 6 2 4 5 6 2 4 5 6 1 2.9 1 275 25 25 25 195.9.4.. 2.8 2.5 4.5 4..6. 2.9 2.7 1.7 47 41 75 5 1 29 5.7 5.1 4.8 4.4 4.1.8 2 2 6.9 65 55 5 47 41 9 7.9 6.7 6.5 6. 5.5 5. 1.9 9.6 8.6 8. 7. 6.5 4.7 99 82 75 7 62 58 11.4 1.1 9.6 8.8 8.1 7.5 (6.4) (5.6) (5.) (4.7) (4.1) (.8) 4 2 9.9 11 195 1 95 825 775 15.8 14.4 1. 12. 11. 1. 2.7 2.8 18.6 17.4 15.2 14.1 7.7 191 1645 15 145 125 1165 22.8 2.2 19.2 17.6 16.2 15. (6.4) (5.6) (5.) (4.7) (4.1) (.8) 6 2 11.7 191 1645 15 145 125 1165 2.6 2.1 19.5 18. 16.5 15. 6.5 2. 28.6 26.7 2. 21.7 9.5 282 2645 225 215 1855 1745 1.5. 28.8 26.4 24. 22.5 (6.4) (5.6) (5.) (4.7) (4.1) (.8) 8 2 12.9 26 219 2 187 165 155 4.2 26.8 26. 24. 22. 2. 49. 4.2 8.6 6.1 1.5 29. 1.7 8 29 281 247 2 45.6 4.4 8.4 5.2 2.4. (6.4) (5.6) (5.) (4.7) (4.1) (.8) * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 12

TV Transmitting Antenna with dipole panels K 52 4 8.. 47 88 MHz Systems 47... 88 MHz Horizontal Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Equal power splitting E rel 1, 2 bays,5 6 1 2 α 4 1, 4 bays E rel,5 1 1 1 2 α 4 Different power splitting /4 P /7 P 1, 6 bays E rel,5 6 1/7 P 1 2 α 4 1/4 P /7 P 8 bays 1, E rel,5 1 1 1 2 α 4 *) without null fill with null fill and beam tilt 1

14

Antennas for TV in lower VHF Band 47... 88 MHz Model Types: K 52 16 8.., K 52 1 8.., K 52 4 8.. Antennas 47... 88 MHz Type No. Description Frequency range Gain Page K 52 1 8.. Directional Antenna, steel 47... 88 MHz 7.5 horizontal 16 K 52 4 8.. Directional Antenna, steel 47... 88 MHz 7. horizontal 17 K 52 16 8.. 8 Element Yagi Antenna, 47... 88 MHz 6. horizontal or 18 aluminum vertical 15

K 52 1 8.. Directional Antenna 47... 88 MHz Directional antenna of hot-dip galvanized steel. Especially suitable for square and round masts. Radiation Patterns (at mid-band) 72 1 in E-plane Horizontal Radiation Pattern 56 1 Length see table in H-plane Vertical Radiation Pattern Type No. K 52 1 81 7 K 52 1 82 7 K 52 1 8 7 K 52 1 84 7 K 52 1 85 7 K 52 1 86 7 Order No. 61 7 61 71 61 72 61 819 61 82 61 821 Frequency range Channel Input VSWR Gain (ref. λ/2 dipole) Max. power Dimensions in mm A B C Weight in kg Wind load in kn (at v = 16 km/h) frontal lateral Material: Mounting: Grounding: Combinations: Special features: Ice protection: Scope of supply: 47 54 MHz 54 61 MHz 6 68 MHz 66 72 MHz 76 82 MHz 82 88 MHz 2 4 2 4 5 6 7-16 female (type gas-stop) < 1.15 7.5 Horizontal (vertical upon request) 5 Ω 6 kw (higher power upon request) 6 296 264 247 2165 215 2 28 25 24 24 19 1 118 16 995 875 82 14 124 11 1 94 89 2.6 2. 2.1 2.5 1.8 1.6 1. 1.2 1.1 1.1 1..9 225 km/h Hot-dip galvanized steel. Radome: Fiberglass. Mounting hardware and mounting dimensions upon request. Via mounting parts. The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for square and round masts. The antenna is shipped dismounted. Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Antenna consisting of two half-wave dipoles with reflector screens. 16

K 52 4 8.. Directional Antenna 47... 88 MHz Directional antenna of hot-dip galvanized steel. Especially suitable for triangular and round masts. Radiation Patterns (at mid-band) Antennas 47... 88 MHz 8 1 in E-plane Horizontal Radiation Pattern 56 1 Length see table in H-plane Vertical Radiation Pattern Type No. K 52 4 81 7 K 52 4 82 7 K 52 4 8 7 K 52 4 84 7 K 52 4 85 7 K 52 4 86 7 Order No. 62 7 62 8 62 9 62 4 62 41 62 42 Frequency range Channel Input VSWR Gain (ref. λ/2 dipole) Max. power Dimensions in mm A B C Weight in kg Wind load in kn (at v = 16 km/h) frontal lateral Material: Mounting: Grounding: Combinations: Special features: Ice protection: Scope of supply: 47 54 MHz 54 61 MHz 6 68 MHz 66 72 MHz 76 82 MHz 82 88 MHz 2 4 2 4 5 6 7-16 female < 1.15 7 Horizontal 5 Ω 6 kw (higher power on request) 6 296 264 247 2165 215 2 28 25 24 24 19 1 118 16 995 875 82 148 17 125 117 1 97 2.6 2.2 2.5 1.9 1.7 1.55 1. 1.2 1.15 1.1 1..95 225 km/h Hot-dip galvanized steel. Radome: Fiberglass. Mounting hardware and mounting dimensions upon request. Via mounting parts. The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for triangular and round masts. The antenna is shipped dismounted. Even under icy conditions the antenna keeps operating due to the radomes covering the feed areas. Antenna consisting of two half-wave dipoles with reflector screens. 17

K 52 16 8.. Directional Antenna 47... 88 MHz 8 element Yagi-antenna of weather-proof aluminum, fiberglass-elements with encapsulated copper stranded wire. Radiation Patterns (at mid-band) 68 1 C in E-plane Horizontal Radiation Pattern 128 A Length see table B 1 in H-plane Vertical Radiation Pattern Type No. K 52 16 81 7 K 52 16 82 7 K 52 16 8 7 K 52 16 84 7 K 52 16 85 7 K 52 16 86 7 Order No. 6 22 6 225 6 227 61 822 61 82 61 824 Frequency range Channel Input VSWR Gain (ref. λ/2 dipole) Max. power Dimensions in mm A B C Weight in kg Wind load in N (at v = 16 km/h) Horizontally polarized frontal lateral Vertically polarized frontal lateral Packing in cm Material: Mounting: Special features: Combinations: Grounding: 47 54 MHz 54 61 MHz 6 68 MHz 66 72 MHz 76 82 MHz 82 88 MHz 2 4 2 4 5 6 7-16 female < 1.15 6 Horizontal or vertical by conversion of the clamps 5 Ω 2 W (higher power upon request) 5 295 27 242 212 197 251 224 27 181 168 2225 195 174 161 141 11 18 15 12.5 11.5 1 9 715 615 54 5 44 4 675 575 475 44 75 5 715 615 54 5 44 4 79 675 615 565 5 465 x 76 x 1 275 x 76 x 1 25 x 76 x 1 222 x 76 x 1 192 x 76 x1 177 x 76 x 1 16 km/h Support: Weather-proof aluminum. Elements: Fiberglass with inlaid copper wire. Cover: Fiberglass. Clamp: Hot-dip galvanized steel. To pipes of 6 115 mm diameter by means of mounting clamps, supplied. The antenna is shipped dismounted. Two or more antennas can be combined to achieve higher gain and longer, narrower beam width. Via mounting parts. 18

Antenna Systems 87.5 18 MHz Systems 87.5 18 MHz 19

FM Transmitting Antenna with dipole panels K 52 1 1.. 87.5 18 MHz Antenna array of dipole panels K 52 1 1.. for different radiation patterns, especially suitable for mounting on square masts. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. 87.5 18 MHz s < 1.2 throughout the whole frequency range. Lower VSWR for single channels upon request. 5 Ω Horizontal or vertical Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional, directional or custom-designed. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h H 2 mm No. Panels Gain* Weight Antenna Windload of per (at mid-band) (without mounting height H (v = 16 km/h) bays bay times hardware) kg m kn 2 5..2 14 2.7 1.5 2.2 2 2.5 4. 4 2. 1.6 26 4.7 2 8. 6. 26 5.5 2 6.5 4.5 4 5.7 8. 4 5..2 5 9.5 2 11. 12.6 5 11. 4 9.5 8.9 79 12.1 16. 4 8. 6. 18 19. 2 12.8 19.1 79 16.5 6 11. 1. 12 18.5 24. 4 9.7 9. 161 28.5 2 14. 25.1 18 22. 8 12.5 17.8 161 24.9 2. 4 11. 12.6 215 8. * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 2

FM Transmitting Antenna with dipole panels K 52 1 1.. 87.5 18 MHz Horizontal Radiation Patterns Vertical Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Systems 87.5 18 MHz Equal power splitting E rel 1, 2 bays,5 1 2 α 4 E rel 1, 4 bays,5 1 1 1 2 α 4 Equal power splitting Different power splitting 4/1 P 1, 6 bays 1/1 P E rel,5 4/1 P 1 2 α 4 1/1 P 8 bays 1, E rel,5 1 1 1 2 α 4 *) without null fill with null fill and beam tilt 21

FM Transmitting Antenna with dipole panels K 52 4 1. 87.5 18 MHz Antenna array of dipole panels K 52 4 1. for different radiation patterns, especially suitable for mounting on triangular or round masts. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. 87.5 18 MHz s < 1.2 throughout the whole frequency range. Lower VSWR for single channels upon request. 5 Ω Horizontal Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional, directional or custom-designed. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h H 2 mm No. Panels Gain* Weight Antenna Windload of per (at mid-band) (without mounting height H (v = 16 km/h) bays bay times hardware) kg m kn 1 2 4 6 8 2.9 2.5 15. 1.7 1.5 22 2.5 4.2 2 6.9 4.9 29 6. 4.7. 42 5.7 8.4 2 9.9 9.8 56 12. 7.7 5.9 85 12.1 16.8 2 11.7 14.8 85 18. 9.5 8.9 129 18.5 25.2 2 12.9 19.5 115 24. 1.7 11.7 17 24.9.6 * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 22

FM Transmitting Antenna with dipole panels K 52 4 1. 87.5 18 MHz Horizontal Radiation Patterns Vertical Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Systems 87.5 18 MHz Equal power splitting E rel 1, 2 bays,5 6 1 2 α 4 1, 4 bays E rel,5 1 1 1 2 α 4 Different power splitting /4 P /7 P 1, 6 bays E rel 6,5 1/7 P 1 2 α 4 1/4 P /7 P 8 bays 1, E rel,5 1 1 1 2 α 4 *) without null fill with null fill and beam tilt 2

FM Transmitting Antenna with dipole panels K 5 2 1.. 87.5 18 MHz Antenna array of circularly polarized dipole panels K 5 2 1.. for different radiation patterns, especially suitable for mounting on square masts. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. 87.5 18 MHz s < 1.2 throughout the whole frequency range. Lower VSWR for single channels upon request. 5 Ω Linear, circular or elliptical Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional, directional or custom-designed. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h H mm No. Panels Gain* Weight Antenna Windload of per (at mid-band) (without mounting height H (v = 16 km/h) bays bay times hardware) kg m kn 2 2. 1.6 2 2.75 1.5 1.1 2 2.2 4.5 4 1..8 42 5.5 2 5..2 42 5.5 2.5 2.4 75 5.2 8.7 4 2. 1.6 85 11. 2 8. 6. 85 11. 4 6.5 4.5 15 11.2 17.4 4 5..2 166 22. 2 9.8 9.6 15 16.5 6 8. 6.8 187 17.2 26.1 4 6.7 4.7 224. 2 11. 12.6 166 22. 8 9.5 8.9 224 2.2 4.8 4 8. 6. 297 44. * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 24

FM Transmitting Antenna with dipole panels K 5 2 1.. 87.5 18 MHz Horizontal Radiation Patterns Vertical Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Systems 87.5 18 MHz Equal power splitting E rel 1, 2 bays,5 1 2 α 4 E rel 1, 4 bays,5 1 1 1 2 α 4 Equal power splitting Different power splitting 4/1 P 1, 6 bays 4/1 P E rel,5 1/1 P 1/1 P 1 2 α 4 1, 8 bays E rel,5 1 1 1 2 α 4 *) without null fill with null fill and beam tilt 25

FM Transmitting Antenna with dipole panels K 5 6 1.. 87.5 18 MHz Antenna array of circularly polarized dipole panels K 5 6 1.. for different radiation patterns, especially suitable for mounting on triangular or round masts. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. 87.5 18 MHz s < 1.2 throughout the whole frequency range. Lower VSWR for single channels upon request. 5 Ω Circular Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional, directional or custom-designed. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h H mm No. Panels Gain* Weight Antenna Windload of per (at mid-band) (without mounting height H (v = 16 km/h) bays bay times hardware) kg m kn 1 2 4 6 8 2. 1. 14 2.4 2..6 2 1.82.5 2.1 2. 26 4.8 1.1 1. 4 4.82 7. 2 6.2 4.2 58 9.6 4.2 2.6 8 1.82 14. 2 8.1 6.5 8 14.4 6.1 4.1 12 16.82 21. 2 9. 8.5 11 19.2 7. 5.4 159 22.82 28. * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 26

FM Transmitting Antenna with dipole panels K 5 6 1.. 87.5 18 MHz Horizontal Radiation Patterns Vertical Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Systems 87.5 18 MHz Equal power splitting E rel 1, 2 bays,5 6 1 2 α 4 E rel 1, 4 bays,5 1 1 1 2 α 4 Different power splitting /4P /7P 1, 6 bays E rel 6,5 1/4P 1/7P 1 2 α 4 /7P 1, 8 bays E rel,5 1 1 1 2 α 4 *) without null fill with null fill and beam tilt 27

FM Transmitting Antenna with Broadband Sidemount Antenna K 5 5 1.. 87.5 18 MHz Antenna array of elliptically polarized dipole panels K 5 5 1.. for different radiation patterns, especially suitable for mounting on pipes. The feeder network is made up of coaxial power splitters and flexible connecting cables. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. 87.5 18 MHz s < 1.25 throughout the whole frequency range. Lower VSWR for single channels upon request. 5 Ω Elliptical Connectors according to IEC or EIA are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional,with preferred direction. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h H > 5 mm 21 mm No. Gain* Weight Antenna Windload of (at mid-band) (without mounting height H (v = 16 km/h) bays times hardware) kg m frontal N lateral N 1 1.5.7 25.84 115 65 4 4.5 2.8 1 7.1 46 146 > 5 mm 6 5.5.6 15 11. 69 219 8 7.5 5.6 2 15.5 92 292 1 8.8 7.6 25 19.7 115 65 * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 28

FM Transmitting Antenna with Broadband Sidemount Antenna K 5 5 1.. 87.5 18 MHz Typical Horizontal Radiation Pattern (at mid-band) Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Systems 87.5 18 MHz 1, 4 bays E rel,5 1 1 2 α 4 1, 6 bays E rel,5 1 2 α 4 1, 8 bays E rel,5 1 2 α 4 1, 1 bays E rel,5 1 2 α 4 *) without null fill with null fill and beam tilt 29

FM Transmitting Antenna (Superturnstile Antenna) 87.5 18 MHz K 52 97 1.. Self-supporting hot-dip galvanized steel superturnstile antenna. Up to 4 bays may be stacked. Optionally up to 8 bays may be stacked if the superturnstile antennas are mounted inside a self-supporting fiberglass cylinder. Input Frequency range VSWR Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Internal connections Structure Mounting Ice protection Grounding Connectors according to IEC, EIA or DIN. 87.5 18 MHz s < 1.2 throughout the whole frequency range. Tuning not required. 5 Ω Horizontal According to customer s requirements, 1 kw max. per bay. Null fill and beam tilt upon request. Omnidirectional Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. The radiating elements are fed with coaxial connecting cables and hybrid couplers. Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. Superturnstile antenna on self-supporting hot dip galvanized steel structure. Up to 4 bays may be stacked. On top of existing structure by means of a flange. Under icing the fiberglass cover over the feedslots and the rugged construction keep the antenna in proper function. Via mounting parts. 16 km/h H mm No. Type No. / Gain* Weight Antenna Windload of Order No. (at mid-band) (without cylinder) height H (without cylinder) bays times kg m (16 km/h) kn 1 K 52 97 11 1 1.26 275.2 2 K 52 97 12 4 2.51 55 6 6.5 4 K 52 97 14 7 5. 145 12 15. * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.4 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page).

FM Transmitting Antenna (Superturnstile Antenna) 87.5 18 MHz K 52 97 1.. Typical Horizontal Radiation Pattern (at mid-band) Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Systems 87.5 18 MHz 1 1 bay E rel 5 1 1 2 α 4 1 2 bays E rel 5 1 2 α 4 1 4 bays E rel 5 1 2 α 4 *) without null fill with null fill and beam tilt 1

K 5 7 1.. FM-Transmitting Antenna 87.5 18 MHz An economic FM-transmitting antenna system can be built by stacking 2 or more vertical dipoles 762 94 in front of a thin tubular mast. Such antenna systems provide signal coverage in all azimuth directions as shown in the horizontal radiation pattern below. (The horizontal radiation pattern will be distorted, if a significantly bigger mast is used). Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. 87.5 18 MHz s < 1.25 throughout the whole frequency range. Lower VSWR for single channels upon request. 5 Ω Vertical Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h > 25 mm H 21 mm No. Gain* Weight Antenna Windload of (at mid-band) (without mounting height H (v = 16 km/h) bays times hardware) kg m frontal N lateral N 1 2. 1.6 25 1.8 115 22 2 5..2 25.48 2 44 4 8. 6. 1 7.68 46 88 6 9.7 9. 15 11.88 69 12 8 11. 12.6 2 16.8 92 176 1 11.8 15.1 25 2.28 115 22 * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 2

K 5 7 1.. FM-Transmitting Antenna 87.5 18 MHz Typical Horizontal Radiation Pattern (at mid-band beamtilt 1 ) Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Systems 87.5 18 MHz 1, 4 bays 22 E rel,5 1 1 2 α 4 1, 6 bays E rel,5 1 2 α 4 1, 8 bays E rel,5 1 2 α 4 1, 1 bays E rel,5 1 2 α 4 *) without null fill with null fill and beam tilt

4

Antennas for FM in VHF Band 66 7 MHz and 87.5 18 MHz Model Types: K 52 14 1.., K 52 22 1.., K 52 1 1.., K 52 4 1.., K 52 5 1.., K 52 4 1.., K 52 97 1.., K 5 22 1.., K 5 1 1.., K 5 2 1.., K 5 5 1.., K 5 6 1.., K 5 7 1.., K 5 8 1.., K 5 9 1.., K 5 4 1.., Type No. Description Frequency range Gain Page K 52 1 18. Directional Antenna, steel 87.5 18 MHz 7.5 horizontal 6 or vertical 715 849 Directional Antenna, steel 87.5 18 MHz 7.5 horizontal 6 or vertical 774 21 Directional Antenna, steel 87.5 18 MHz 7.5 horizontal 7 or vertical K 52 4 17 Directional Antenna, steel 87.5 18 MHz 7. horizontal 8 75 18 Directional Antenna, steel 87.5 18 MHz 7. horizontal 8 752 18 Directional Antenna, steel 87.5 18 MHz 7. horizontal 8 772 5 Directional Antenna, steel 87.5 18 MHz 6. vertical 9 772 51 Directional Antenna, steel 87.5 18 MHz 6. vertical 9 772 52 Directional Antenna, steel 87.5 18 MHz 6. vertical 9 75 118 Directional Antenna, steel 87.5 18 MHz 4. vertical 4 768 476 Dual Band Directional Antenna, steel.66 7 MHz 6. horizontal 41 87.5 18 MHz 7.5 horizontal K 5 2 18. Directional Antenna, steel 87.5 18 MHz 7.5 linear 42 4.5 circular 754 154 Directional Antenna, steel 87.5 18 MHz.5 circular 4 755 587 Directional Antenna, steel 87.5 18 MHz.5 circular 4 757 629 Directional Antenna, steel 87.5 18 MHz.5 circular 4 762 19 Directional Antenna, steel 87.5 18 MHz.5 circular 4 75 122 Broadband FM Sidemount Antenna, steel 87.5 18 MHz 1.5 elliptical 44 75 12 Broadband FM Sidemount Antenna, steel 87.5 18 MHz 1.5 elliptical 44 75 186 Directional Antenna, steel, aluminum 87.5 18 MHz 5.5 Horizontal 45 and vertical K 52 4 17 4 Element Yagi Antenna, aluminum 87.5 18 MHz 5.5 horizontal 46 or vertical K 52 14 17 9 Element Yagi Antenna, aluminum 87.5 18 MHz 7.5 horizontal 47 775 78 Directional Antenna, steel 87.5 18 MHz 5. vertical 48 775 88 Directional Antenna, steel 87.5 18 MHz 5. vertical 48 77 776 Element Yagi Antenna, steel 87.5 18 MHz 4. vertical 49 77 777 Element Yagi Antenna, steel 87.5 18 MHz 4. vertical 49 762 94 Broadband Dipole for Tubular Mast, steel 87.5 18 MHz 2. vertical 5 76 715 Broadband Dipole for Tubular Mast, steel 87.5 18 MHz 2. vertical 5 775 1 Broadband Dipole for Tubular Mast, steel 87.5 18 MHz 2. vertical 5 75 14 Directional Antenna, steel 87.5 18 MHz. vertical 5 75 15 Directional Antenna, steel 87.5 18 MHz. vertical 51 K 52 22 17 Log.-per. Directional Antenna, steel 87.5 18 MHz 6. horizontal 52 775 Directional Antenna, steel 87.5 18 MHz 6. vertical 5 775 1 Directional Antenna, steel 87.5 18 MHz 6. vertical 5 775 2 Directional Antenna, steel 87.5 18 MHz 6. vertical 5 Antennas 87.5 18 MHz 5

K 52 1 1.. Directional Antenna 87.5 18 MHz Broadband directional antenna of hot-dip galvanized steel. Especially suitable for square masts. Type No. K 52 1 187 K 52 1 188 715 849 Order No. 61 278 61 629 Input (type gas-stop) 7-16 female 7/8 EIA-flange 1- female Frequency range 87.5 18 MHz VSWR < 1.15 Gain (ref. to λ/2 dipole) 7.5 at mid-band 5 Ω Horizontal or vertical Max. power 2.5 kw 4 kw 6 kw (higher power upon request) Weight 64 kg Wind load (at 16 km/h) Horizontally polarized frontal / lateral: 15 N / 875 N Vertically polarized frontal / lateral: 15 N / 825 N 225 km/h Material: Mounting: Hot-dip galvanized steel. Radome: Fiberglass. Mounting hardware and mounting dimensions upon request. A: 249 mm B: 174 mm C: 7 mm Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for square masts. Scope of supply: Antenna without mounting clamps. Special features: The antenna is shipped dismounted. Radiation Patterns (at mid-band) 7 57 1 1 in E-plane in H-plane 6

K 52 1 1.. Directional Antenna 87.5 18 MHz Broadband directional antenna of hot-dip galvanized steel. Especially suitable for square masts. Type No. / Order No. 774 21 Frequency range 87.5 18 MHz Input (type gas-stop) 7/8 EIA-flange VSWR < 1.15 Gain (ref. to λ/2 dipole) 7.5 at mid-band 5 Ω Horizontal or vertical Max. power 4 kw (higher power upon request) Weight 85 kg Wind load (at 16 km/h) Horizontally polarized frontal / lateral: 2 N / 18 N Vertically polarized frontal / lateral: 2 N / 125 N 22 km/h Antennas 87.5 18 MHz Material: Mounting: Hot-dip galvanized steel. Radome: Fiberglass. Mounting hardware and mounting dimensions upon request. A: 249 mm B: 27 mm C: 82 mm Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for square masts. Scope of supply: Antenna without mounting clamps. Special features: The antenna is shipped dismounted. Radiation Patterns (at mid-band) 7 65 1 1 in E-plane in H-plane 7

K 52 4 1.. Directional Antenna 87.5 18 MHz Broadband directional antenna of hot-dip galvanized steel. Especially suitable for triangular and round masts. B Type No. K 52 4 17 75 18 752 18 Order No. 61 694 Input (type gas-stop) 7-16 female 7/8 EIA-flange 1- female Frequency range 87.5 18 MHz VSWR < 1.2 Gain (ref. to λ/2 dipole) 7 at mid-band 5 Ω Horizontal Max. power 2.5 kw 4 kw 6 kw (higher power upon request) Weight 66 kg Wind load (at 16 km/h) frontal: 17 N lateral: 875 N 225 km/h A C Material: Mounting: Hot-dip galvanized steel. Radome: Fiberglass. Mounting hardware and mounting dimensions upon request. A: 249 mm B: 174 mm C: 76 mm Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for triangular and round masts. Scope of supply: Antenna without mounting clamps. Special features: The antenna is shipped dismounted. Radiation Patterns (at mid-band) 8 56 1 1 in E-plane Horizontal Radiation Pattern in H-plane Vertical Radiation Pattern 8

K 5 1 1.. Directional Antenna 87.5 18 MHz Vertically polarized directional antenna. Especially suitable for triangular and round masts. Type No. / Order No. 772 5 772 51 772 52 Input 7-16 female 7/8 1 5/8 (type gas-stop) EIA-flange EIA-flange Frequency range 87.5 18 MHz VSWR < 1.15 Gain (ref. λ/2 dipole) 6 at mid-band 5 Ω Vertical Max. power 2.5 kw 5 kw 14 kw Weight 65 kg 65 kg 75 kg Wind load frontal: 155 N 155 N 162 N (at 16 km/h) lateral: 85 N 85 N 97 N 225 km/h Dimensions A 22 mm B 2 mm A Antennas 87.5 18 MHz Material: Mounting: Hot-dip galvanized steel. Radome: Fiberglass. To a vertical pipe of 89 mm by pcs. U-bolts (supplied) or to proper flanges. Mounting dimensions upon request. B 772 5 Grounding: Via mounting parts. Ice protection: Even under icy conditions the antenna keeps operating due to the radomes covering the feed areas. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for triangular and round masts. Scope of supply: Antenna consisting of two half-wave dipoles with reflector screen and U-bolts. Special features: The antenna is shipped dismounted. Radiation Patterns (at mid-band) 7 76 1 E-plane Vertical Radiation Pattern 1 H-plane Horizontal Radiation Pattern 9

K 5 1 1.. Directional Antenna 87.5 18 MHz Vertically polarized directional antenna. Type No. / Order No. 75 118 Input 7/8 EIA-flange Frequency range 87.5 18 MHz VSWR < 1. Gain (ref. λ/2 dipole) 4 at mid-band 5 Ω Vertical Max. power 5 kw Weight approx. 41 kg Wind load approx. frontal: 65 N (at 16 km/h) lateral: 85 N 225 km/h Material: Hot-dip galvanized steel. Radome: Fiberglass. Mounting: Mounting hardware upon request. Grounding: Via mounting parts. Ice protection: Even under icy conditions the antenna keeps operating due to the radomes covering the feed areas. 128 Scope of supply: Antenna consisting of one half-wave dipole with reflector screen. Special features: The antenna is shipped dismounted. 19 7/8 EIA All dimensions in mm 85 Radiation Patterns (at mid-band) 15 7 1 1 in H-plane Horizontal Radiation Pattern in E-plane Vertical Radiation Pattern 4

K 52 5 1.. Dual Band Directional Antenna 66 7 MHz / 87.5 18 MHz Dipole panel for OIRT and CCIR bands for FM radio. Especially suitable for square masts. Type No. / Order No. 768 476 Input 7-16 female Frequency range OIRT: 66 7 MHz / CCIR: 87.5 18 MHz VSWR 66 7 MHz: 1. / 87.5 18 MHz: 1.2 Gain (ref. λ/2 dipole) 66 7 MHz: 6 / 87.5 18 MHz: 7.5 5 Ω Horizontal Max. power 6 kw (higher power upon request) Weight 15 kg Wind load (at 16 km/h) frontal: 2.5 kn lateral: 1.1 kn 225 km/h C B Antennas 87.5 18 MHz Material: Mounting: Hot-dip galvanized steel. Radome: Fiberglass. Mounting hardware and mounting dimensions upon request. A: 284 mm B: 15 mm C: 18 mm A Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for square masts. Scope of supply: Antenna consisting of two half-wave dipoles with reflector screens. Special features: The antenna is shipped dismounted. Radiation Patterns (at mid-band) 72 7 1 in E-plane Horizontal Radiation Pattern 1 in H-plane Vertical Radiation Pattern 41

K 5 2 1.. Directional Antenna 87.5 18 MHz Broadband directional antenna made of hot-dip galvanized steel. Especially suitable for square masts. Optionally for circular, horizontal, vertical or slant polarization. B 4 dipoles are arranged symmetrically in front of a reflector screen. With suitable feeding the antenna radiates circularly polarized. An isolation of 4 5 between horizontal and vertical pairs of dipoles is achieved through the spezial design. This design permits the transmission of 2 programs horizontally and vertically polarized independently from each other. C Type No. K 5 2 187 K 5 2 188 Order No. 61 768 61 979 A Input 4 x 7-16 female 4 x 7/8 EIA-flange Frequency range 87.5 18 MHz VSWR < 1.25 (linear polarization) < 1.1 (circular polarization) Gain (ref. λ/2 dipole) 7.5 at mid-band (linear polarization) 4.5 at mid-band (circular polarization) 5 Ω Max. power 2.5 kw for each input 4 kw for each input (higher power upon request) Weight 89 kg Wind load (at 16 km/h) Frontal: 1.6 kn Lateral: 1.1 kn 225 km/h Material: Mounting: Hot-dip galvanized steel. Weather protection: fiberglass cover. The antenna must be mounted so that the bent radiators are horizontally polarized. Mounting dimensions and mounting hardware on request. A = B: 22 mm C = 8 mm Radiation Patterns (at mid-band) Horizontal (bent dipoles) 66 K 5 2 187 62 Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fibreglass covers of the feeding points. 1 1 Grounding: : Via mounting parts. Suitable feeding of the horizontal and vertical dipole pairs optionally result in left or right hand circular or elliptical or slant polarization or simultaneous horizontal and vertical polarization. in E-plane Horizontal Radiation Pattern Vertical (straight dipoles) in H-plane Vertical Radiation Pattern Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for square masts. 1 62 1 64 Scope of supply: Antenna without mounting clamps. Special features: The antenna will be shipped dismounted. in H-plane Horizontal Radiation Pattern in E-plane Vertical Radiation Pattern 42

K 5 6 1.. Directional Antenna 87.5 18 MHz Circularly polarized broadband directional antenna of hot-dip galvanized steel. Especially suitable for triangular and round masts. A Type No. normal position 754 154 755 587 Order No. rotated position 757 629 762 19 Input 2 x 7-16 female 2 x 1- female Frequency range 87.5 18 MHz VSWR < 1.2 Gain (ref. λ/2 dipole).5 at mid-band 5 Ω Circular Max. power 2.5 kw for each input 5 kw for each input Weight 6 kg Wind load (at 16 km/h) frontal: 125 N lateral: 875 N 225 km/h C B Antennas 87.5 18 MHz Material: Mounting: Hot-dip galvanized steel. Radome: Fiberglass. Mounting hardware and mounting dimensions upon request. A = B: 182 mm C: 9 mm Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for triangular and round masts. Scope of supply: Antenna without mounting clamps. Special features: The antenna is shipped dismounted. Radiation Patterns (at mid-band) 76 1 4

K 5 5 1.. Broadband FM Sidemount Antenna 87.5 18 MHz Omnidirectional propagation with preferred direction. Mounting to pipes. Elliptical polarization. Type No. / Order No. 75 122 75 12 Input 7/8 EIA-flange 1 5/8 EIA-flange Frequency 87.5 18 MHz VSWR in one channel < 1.5 Gain (ref. λ/2 dipole) 1.5 d at mid-band 5 Ω Elliptical Max. power 5 kw 1 kw (at 4 C ambient temperature) Weight 25 kg Wind load (at 16 km/h) frontal: 115 N lateral: 65 N 24 km/h Packing size 1 x 1 x 2 mm Material: Hot-dip galvanized steel. Ice protection: Feed point radome (optional). Mounting: To pipes of 75 125 mm by means of 2 mounting clamps, supplied. A Grounding: Via mounting parts. B Horizontal Radiation Patterns (at mid-band) and Pattern depending on mast structure behind 75 12 A = 185 mm B = approx. 84 mm 1 1 Vertical Horizontal 44

K 5 4 1.. Directional Antenna 87.5 18 MHz 2 x 4 element broadband Yagi antenna. Component for low power transmitting antennas. Type No. / Order No. 75 186 Input 2 x 7-16 female Frequency range 87.5 18 MHz VSWR s < 1. Gain (ref. λ/2 dipole) 5.5 at mid-band 5 Ω Horizontal and vertical Max. power 2 x 5 W (at 4 C ambient temperature) Weight 25 kg Wind load (at 16 km/h) frontal: 115 N lateral: 65 N 24 km/h Packing size 16 x 16 x 19 mm B Antennas 87.5 18 MHz Material: Mounting: Grounding: Special features: Supporting pipe: Hot-dip galvanized steel. Director pipe and reflector: Weather-proof aluminum. Radiator in fiberglass radome. To pipes of 6 12 mm diameter by means of mounting clamps, supplied. Via mounting parts. The antenna is shipped dismounted. A A = approx. 156 mm B = 17 mm Radiation Patterns (at mid-band) 65 12 1 in E-plane 1 in H-plane 45

K 52 4 1.. Directional Antenna 87.5 18 MHz 4 element broadband Yagi antenna. Component for low power transmitting antennas. Type No. K 52 4 17 Order No. 6 26 Input 7-16 female Frequency range 87.5 18 MHz VSWR s < 1. Gain (ref. λ/2 dipole) 5.5 at mid-band 5 Ω Horizontal or vertical Max. power 5 W (at 4 C ambient temperature) Weight 1.5 kg Wind load (at 16 km/h) Horizontally polarized frontal / lateral: 215 N / 16 N Vertically polarized frontal / lateral: 215 N / 4 N 225 km/h Packing size 16 x 16 x 19 mm A A = 14 mm B = 17 mm B Material: Supporting pipe: Hot-dip galvanized steel. Director pipe and reflector: Weather-proof aluminum. Radiator in fiberglass radome. Mounting: To pipes of 6 115 mm diameter by means of mounting clamps, supplied. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Special features: The antenna is shipped dismounted. New: The design has been improved to allow use of both polarizations. Radiation Patterns (at mid-band) 65 12 Assembly 1 in E-plane 1 in H-plane 46

K 52 14 1.. Directional Antenna 87.5 18 MHz 9 element broadband Yagi antenna of weatherproof aluminum. B Antennas 87.5 18 MHz C A A: 16 mm B: 184 mm C: 175 mm Type No. K 52 14 17 Order No. 6 24 Radiation Patterns (at mid-band) Input 7-16 female Frequency range 87.5 18 MHz VSWR < 1.4 Gain (ref. λ/2 dipole) 7.5 at mid-band 5 Ω Horizontal or vertical Max. power 5 W Weight 16 kg Wind load (at 16 km/h) Horizontally polarized frontal / lateral: 575 N / 625 N 225 km/h Vertically polarized frontal / lateral: 575 N / 665 N 2 km/h Packing size 1 x 22 x 22 mm 1 in E-plane 72 56 Material: Weather-proof aluminum. Radiator in fiberglass radome. Mounting: Grounding: Combinations: To pipes of 6 115 mm diameter by means of mounting clamps, supplied. Via mounting parts. Two or more antennas can be combined to achieve higher gain and longer, narrower beam width. 1 in H-plane Special features: The antenna is shipped dismounted. 47

K 5 4 1.. Directional Antenna 87.5 18 MHz 4 elements broadband Yagi antenna. Mounting to pipes. Vertically polarized. 5 gain. Type No. / Order No. 775 78 775 88 Input 7/8 EIA-flange 7-16 female Frequency 87.5 18 MHz VSWR < 1. Gain (ref. λ/2 dipole) 5 at mid-band 5 Ω Vertical Max. power 5 kw kw (at 4 C ambient temperature) Weight 2 kg Wind load (at 16 km/h) frontal: 2 N lateral: 4 N 225 km/h Packing size 18 x 175 x 95 mm 175 mm Material: Hot-dip galvanized steel. Mounting: Grounding: To pipes of 6 125 mm by means of 2 U-bolts, supplied. Via mounting parts. 16 mm Specials: The antenna may be equipped with ice protection set Type No. 75 1118 for use at sites with icy conditions (please order separately). The max. wind velocity with an ice layer of cm is 1 km/h. Radiation Patterns (at mid-band) 12 6 1 1 in H-plane Horizontal Radiation Pattern in E-plane Vertical Radiation Pattern Assembly 48

K 5 9 1.. Directional Antenna 87.5 18 MHz elements broadband Yagi antenna. Mounting to pipes. Vertically polarized. 4 gain. Type No. / Order No. 77 776 77 777 Input 7/8 EIA-flange 7-16 female (type gas-stop) Frequency 87.5 18 MHz VSWR < 1. Gain (ref. λ/2 dipole) 4 at mid-band 5 Ω Vertical Max. power 5 kw kw (at 4 C ambient temperature) Weight 1 kg Wind load (at 16 km/h) frontal: 165 N lateral: 275 N 225 km/h Packing size 189 x 155 x 92 mm 1822 mm 1 mm Antennas 87.5 18 MHz Material: Mounting: Grounding: Accessories: Hot-dip galvanized steel. To pipes of 6 125 mm by means of 2 U-bolts, supplied. Via mounting parts. The antenna may be equipped with ice protection set Type No. 774 168 for use at sites with icy conditions (please order separately). The max. wind speed with an ice layer of cm is 1 km/h. Radiation Patterns (at mid-band) 15 7 1 1 in H-plane Horizontal Radiation Pattern in E-plane Vertical Radiation Pattern Assembly 49

K 5 7 1.. Broadband Dipole for Tubular Mast 87.5 18 MHz Omnidirectional propagation with preferred direction. Mounting to pipes. Vertically polarized. 2 gain. Type No. / Order No. 762 94 76 715 775 1 Input 7-16 female 7/8 1 5/8 (type gas-stop) EIA-flange EIA-flange Max. power kw 5 kw 1 kw (at 4 C ambient temperature) Frequency range 87.5 18 MHz VSWR s < 1. s < 1.25 Gain (ref. λ/2 dipole) 2 at mid-band 5 Ω Vertical Wind load frontal: 115 N 165 N (at 16 km/h) lateral: 22 N 4 N Weight 1 kg 22 kg Max. Wind velocity 225 km/h km/h Packing 1552 x 1186 x 197 mm A Material: Mounting: Grounding: Hot-dip galvanized steel. To pipes of 6 125 mm by means of 2 mounting clamps, supplied. Via mounting parts. B 76 715 A: 18 mm / B: 8 mm Radiation Patterns (at mid-band) 22 7 1 1 in H-plane Horizontal Radiation Pattern in E-plane Vertical Radiation Pattern 5

K 5 8 1.. Directional Antenna 87.5 18 MHz 2 elements broadband Yagi antenna. Mounting to pipes. Vertically polarized. gain. Type No. 75 15 75 14 Input 7-16 female 7/8 EIA-flange (type gas-stop) Frequency 87.5 18 MHz VSWR < 1. Gain (ref. λ/2 dipole) at mid-band 5 Ω Vertical Max. power kw 5 kw (at 4 C ambient temperature) Weight 1 kg Wind load (at 16 km/h) frontal: 18 N lateral: 2 N 225 km/h Packing size 185 x 11 x 92 mm Material: Hot-dip galvanized steel. 18 mm 87 mm Antennas 87.5 18 MHz Mounting: Grounding: To pipes of 6 125 mm by means of 2 U-bolts, supplied. Via mounting parts. Radiation Patterns (at mid-band) 175 75 1 1 in H-plane Horizontal Radiation Pattern in E-plane Vertical Radiation Pattern 51

K 52 22 1.. Directional Antenna 87.5 18 MHz Logarithmic-periodic broadband directional antenna with extremely low side-lobes. Especially rugged design of hot-dip galvanized steel. High reliability even under heavy icy conditions. Type No. K 52 22 17 Order No. 6 22 Input 7-16 female Frequency range 87.5 18 MHz VSWR < 1. Gain (ref. to λ/2 dipole) 6 at mid-band 5 Ω Side-lobe suppression > 25 Horizontal (special version for vertical polarization upon request) Max. power 2 kw (higher power upon request) Weight 46 kg Wind load (at 16 km/h) frontal: 5 N lateral: 875 N 225 km/h Packing size 265 x 21 x 7 mm A: 26 mm B: 25 mm A B Material: Hot-dip galvanized steel. Mounting: To pipes of 6 115 mm diameter by means of mounting clamps, supplied. Attention: Antenna may not be installed with vertical polarization. Grounding: Via mounting parts. Combinations: Several antennas can be combined to increase the gain and to produce radiation patterns with very high side-lobe suppressions. Radiation Patterns (at mid-band) 6 95 1 1 in E-Plane Horizontal Radiation Pattern in H-Plane Vertical Radiation Pattern 52

K 5 22 1.. Directional Antenna 87.5 18 MHz Logarithmic-periodic broadband directional antenna with extremely low side-lobes. Especially rugged design of hot-dip galvanized steel. High reliability even under heavy icy conditions. Type No. / Order No. 775 775 1 775 2 Input (type gas-stop) 7-16 7/8 1 5/8 female EIA-flange EIA-flange Frequency range 87.5 18 MHz VSWR < 1. Gain (ref. to λ/2 dipole) 6 at mid-band 5 Ω Side-lobe suppression > 25 Vertical Max. power 2.5 kw 5 kw 1 kw (at 4 C ambient temperature) Weight 46 kg Wind load (at 16 km/h) frontal: 5 N lateral: 1 N 225 km/h Packing size 265 x 21 x 7 mm Antennas 87.5 18 MHz Material: Hot-dip galvanized steel. Mounting: To pipes of 6 115 mm diameter by means of mounting clamps, supplied. 257 Grounding: Via mounting parts. Combinations: Several antennas can be combined to increase the gain and to produce radiation patterns with very high side-lobe suppressions. 24 7/8 EIA 775 1 Radiation Patterns (at mid-band) 95 6 1 1 in H-Plane Horizontal Radiation Pattern in E-Plane Vertical Radiation Pattern 5

54

Antenna Systems 174 2 MHz Systems 174 2 MHz 55

TV Transmitting Antenna with dipole panels K 52 5.. 174 2 MHz Antenna array of dipole panels K 52 5.. for different radiation patterns, especially suitable for mounting on square masts. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Connectors according to IEC, EIA or DIN. Frequency range 174 2 MHz VSWR < 1.5 in the operating channels after tuning. 5 Ω Horizontal. Application of panels K 5 57 allows vertical polarization as well. Internal connections Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. Max. power According to customer s requirements. Vertical radiation pattern Null fill and beam tilt upon request. Horizontal radiation pattern Omnidirectional, directional or custom-designed. Half antenna splitting Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Pressurization Splitters and connecting cables can be supplied with dry air (please specify when ordering). Painting If required, the antenna is painted in aviation warning colours. Grounding Via mounting parts. 225 km/h H 2 mm No. Panels Gain* Weight Antenna Windload of per (at mid-band) (without mounting height H (v = 16 km/h) bays bay times hardware) kg m kn 2 9. 7.9 1 2.5 1 7.6 5.8 195 2.8.75 4 6.1 4.1 27 5. 2 11.8 15.1 27 5. 2 1.4 11. 9 6. 7.5 4 8.9 7.8 54 1. 2 14.7 29.5 54 1. 4 1. 21.4 78 12.4 15. 4 11.8 15.1 18 2. 2 16.4 4.7 81 15. 6 15. 1.6 117 18.8 22.5 4 1.5 22.4 164. 2 17.6 57.5 18 2. 8 16.2 41.7 164 25.2. 4 14.7 29.5 216 4. * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 56

TV Transmitting Antenna with dipole panels K 52 5.. 174 2 MHz Horizontal Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Equal power splitting E rel 1 2 bays Systems 174 2 MHz 5 5 1 α 1 4 bays E rel 1 1 5 5 1 α Equal power splitting Different power splitting 4/1 P 1 6 bays E rel 1/1 P 5 4/1 P 5 1 α 4/1 P 1 8 bays E rel 5 1 1 5 1 α *) without null fill with null fill and beam tilt 57

TV Transmitting Antenna with dipole panels K 52 4 5.. 174... 2 MHz Antenna array of dipole panels K 52 4 5.. for different radiation patterns, especially suitable for mounting on triangular or round masts. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Grounding Connectors according to IEC, EIA or DIN. 174 22 MHz resp. 22 2 MHz < 1.5 in the operating channels after tuning. 5 Ω Horizontal Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional, directional or custom-designed. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 225 km/h H 16 mm No. Panels Gain* Weight Antenna Windload of per (at mid-band) (without mounting height H (v = 16 km/h) bays bay times hardware) kg m kn 1 2 4 6 8 2.9 2.5 5.9 1.7 1.5 7 1.2 1.25 2 6.9 4.9 95 1.8 4.7. 14 2.8 2.5 2 9.9 9.8 18.6 7.7 5.9 27 6. 5. 2 11.7 14.8 27 5.4 9.5 8.9 4 9.2 7.5 2 12.9 19.5 6 7.2 1.7 11.7 54 12.4 1. * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 58

TV Transmitting Antenna with dipole panels K 52 4 5.. 174... 2 MHz Horizontal Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Equal power splitting E rel 1,,5 2 bays Systems 174 2 MHz 6 1 2 α 4 1, 4 bays E rel,5 1 1 1 2 α 4 Different power splitting 6 bays /4 P /7 P 1, E rel 6,5 1/7 P 1 2 α 4 1/4 P /7 P 1, 8 bays E rel,5 1 1 1 2 α 4 *) without null fill with null fill and beam tilt 59

TV Transmitting Antenna (Superturnstile Antenna) 174 2 MHz K 52 97 5.. Superturnstile Antenna made of hot-dip galvanized steel for mounting on top of mast. Up to 4 bays may be built as self-supporting version. Up to 16 bays can be stacked inside a self-supporting G.R.P. cylinder. Input Frequency range VSWR Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Internal connections Mounting Ice protection Grounding Connectors according to IEC, EIA or DIN. 174 2 MHz < 1.5 in the operating channel 5 Ω Horizontal According to customer s requirements, 1 kw max. per bay. Null fill and beam tilt upon request. Omnidirectional Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. The radiating elements are fed with coaxial connecting cables and hybrid couplers. Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. On top of existing structure by means of a flange. The radiating slots are protected by a fiberglass cover. Cylinder provides full protection. Via mounting parts resp. via 4 grounding ropes at the exterior cylinder-surface. As required. H 15 mm 1.6 m G.R.P. cylinder 6 No. Gain* Weight kg Antenna Windload of (at mid-band) without with height H (v = 16 km/h) bays times cylinder cylinder m kn 2 4. 2.5 15 depending. 4. 4 7. 5. 1 on 6. 8. 8 1. 1. 66 fiber- 12. 16. 12 11.8 15.1 11 glass- 18. 24. 16 1. 2. 16 cylinder 24. 4. Wind load with cylinder * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page).

TV Transmitting Antenna (Superturnstile Antenna) 174 2 MHz K 52 97 5.. Typical Horizontal Radiation Pattern (at mid-band) Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. E rel 1 5 2 bays Systems 174 2 MHz 1 1 2 α 4 1 4 bays E rel 5 1 2 α 4 1 8 bays E rel 5 1 2 α 4 1 12 bays E rel 5 1 2 α 4 *) without null fill with null fill and beam tilt 61

TV Transmitting Antenna with dipole panels K 52 5.. 174 2 MHz Typical antenna array with dipole panels K 52 5.. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Radiation pattern Half antenna splitting Pressurization Grounding Connectors according to IEC, EIA or DIN. 174 2 MHz < 1.5 in the operating channel after tuning or < 1.1 in the whole range 5 Ω Horizontal or vertical Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. The examples of radiation patterns are valid for horizontal polarization. At vertical polarization patterns vary slightly. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). Via mounting parts. 225 km/h / 2 km/h H 16 mm No. Panels Gain* Weight Antenna Windload of per (at mid-band) (without mounting height H (v = 16 km/h) bays bay times hardware) kg m kn 2 5.5.5 66 1.1 1 4. 2.7 94 1. 1.85 4.1 2. 122 2.2 2 8.5 7.1 122 2.2 2 7. 5.4 17 2.9.7 4 6.1 4.1 224 4.4 2 11.5 14.1 224 4.4 4 1. 1.7 46 6.1 7.4 4 9.1 8.1 45 8.8 * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.4 null fill:.2.5 Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 62

TV Transmitting Antenna with dipole panels K 52 5.. 174 2 MHz Horizontal Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Equal power splitting 1 bay E rel Systems 174 2 MHz 5 1 2 4 5 α E rel 2 bays 5 1 1 1 2 4 5 α Equal power splitting Different power splitting 4/6 P E rel bays 1/6 P 5 1/6 P 1 2 4 5 α 4 bays E rel 5 1 1 1 2 4 5 α 6

Combined Antenna Systems for TV and DAB TV: 174 22 MHz DAB: 174 24 MHz K 5 2 5.. Dual-polarized antenna systems for simultaneous transmission of DAB and TV. TV DAB Frequency range 174 22 MHz 174 24 MHz VSWR < 1.5 1.1 in the operating channels after tuning Horizontal Vertical Input Connectors according to IEC, EIA or DIN. 5 Ω Max. power According to customer s requirements. 225 km/h 16 mm Internal connections: Vertical radiation pattern: Horizontal radiation pattern: Half antenna splitting: Pressurization: Painting: Grounding: Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. Null fill and beam tilt on request. Omnidirectional, directional or custom-designed. Different radiation patterns for TV and DAB can be realized. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. Via mounting parts. 64

Antennas for TV and DAB in upper VHF Band 174 2 MHz Model Types: K 52 7 5.., K 52 14 5.., K 52 17 5.., K 52 22 5.., K 52 5.., K 52 1 5.., K 52 5.., K 52 4 5.., K 52 4 5.., K 5 2 5.., K 5 1 5.., K 5 2 5.., K 5 5.., K 5 6 5.., K 5 7 5.., K 5 4 5.., Type No. Description Frequency range Gain Page K 52 5. Directional Antenna, steel 174 2 MHz 8. horizontal 66 or vertical K 52 5. Directional Antenna, steel 174 2 MHz 11. horizontal 67 K 5 5. Directional Antenna, steel 174 254 MHz 11. vertical 68 K 52 4 5.. Directional Antenna, steel 174 2 MHz 7. horizontal 69 767 141 Directional Antenna, steel 174 29 MHz 7.5 horizontal 7 77 64 Directional Antenna, steel 174 29 MHz 7.5 horizontal 7 K 52 1 5. Directional Antenna, aluminum 174 2 MHz 7.5 horizontal 71 or vertical 768 Directional Antenna for TV, steel 174 22 MHz 7.5 horizontal 72 Directional Antenna for DAB, steel 22 24 MHz 7.5 vertical 75 185 Directional Antenna for TV 174 22 MHz 7.5 linear 7 and DAB/DMB, steel 174 24 MHz 4.5 circular K 52 4 5.. 5 Element Yagi Antenna, 174 2 MHz 6. horizontal 74 aluminum 768 494 5 Element Yagi Antenna, 215 242 MHz 6. vertical 75 aluminum 75 1 5 Element Yagi Antenna, 22 2 MHz 6. vertical 75 aluminum K 52 17 5.. 15 Element Yagi Antenna, 174 2 MHz 8. horizontal 76 aluminum or vertical K 52 14 5.. 16 Element Yagi Antenna, 174 2 MHz 11. horizontal 77 aluminum K 52 7 5.. 15 Element Yagi Antenna, 174 2 MHz 8. horizontal 78 aluminum or vertical K 52 22 5. Log.-per. Directional Antenna, 174 2 MHz 8.5 horizontal 79 steel or vertical 769 6 Dipole Antenna for DAB, steel 216 24 MHz 5.5 vertical 8 77 61 Dipole Antenna for DAB, steel 216 24 MHz 5.5 vertical 8 772 899 Omnidirectional Antenna for DAB, 216 24 MHz. vertical 81 steel 772 9 Omnidirectional Antenna for DAB, 216 24 MHz 6. vertical 81 steel 75 125 Omnidirectional Antenna for DAB, 216 24 MHz 6. vertical 82 steel 75 126 Omnidirectional Antenna for DAB, 216 24 MHz. vertical 82 steel 776 64 Directional Antenna for DAB, 216 24 MHz 11.5 vertical 8 steel 766 614 Omnidirectional Antenna, steel 22 2 MHz. vertical 84 Antennas 174 2 MHz 65

K 52 5.. Directional Antenna 174 2 MHz Broadband directional antenna of hot-dip galvanized steel. Especially suitable for square and round masts. Type No. K 52 57 K 52 58 Order No. 6 241 62 6 Input 7-16 female 7/8 EIA-flange (type gas-stop) Frequency range 174 2 MHz VSWR < 1.8 Gain (ref. to λ/2 dipole) 8 at mid-band 5 Ω Horizontal or vertical Max. power 2 kw 2.5 kw (higher power upon request) Weight 2 kg Wind load (at 16 km/h) Horizontally polarized frontal / lateral: 75 N / 15 N Vertically polarized frontal / lateral: 75 N / 75 N 225 km/h Packing size 15 x 15 x 55 mm A B C Material: Mounting: Hot-dip galvanized steel. Weather protection: Fiberglass. By means of the pair of hot-dip galvanized steel clamps: K 61 12 to pipes of 6 115 mm K 61 1 to pipes of 115 21 mm (please order separately). Mounting dimensions upon request. A: 1 mm B: 1 mm C: 49 mm Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for square and round masts. Scope of supply: Antenna without mounting clamps. Radiation Patterns (at mid-band) 64 64 1 1 in E-Plane in H-Plane 66

K 52 5.. Directional Antenna 174 2 MHz Horizontally polarized broadband directional antenna of hot-dip galvanized steel. Especially suitable for square masts. B Type No. K 52 57 K 52 58 Order No. 6 261 61 94 Input 7-16 female 7/8 EIA-flange (type gas-stop) Frequency range 174 2 MHz VSWR < 1.1 Gain (ref. to λ/2 dipole) 11 at mid-band 5 Ω Horizontal Max. power 2 kw 2.5 kw (higher power upon request) Weight 6 kg Wind load (at 16 km/h) frontal: 1625 N lateral: 875 N 225 km/h Packing size 285 x 15 x 5 mm A C Antennas 174 2 MHz Material: Mounting: Hot-dip galvanized steel. Weather protection: Fiberglass. By means of the pair of hot-dip galvanized steel clamps: K 61 16 1 to pipes of 77 mm K 61 16 2 to pipes of 6 125 mm (please order separately). Further mounting hardware and mounting dimensions upon request. A: 28 mm B: 1 mm C: 415 mm Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for square masts. Scope of supply: Antenna without mounting clamps. Radiation Patterns (at mid-band) 66 2 1 1 in E-plane Horizontal Radiation Pattern in H-plane Vertical Radiation Pattern 67

K 5 5.. Directional Antenna 174 254 MHz Vertically polarized broadband directional antenna of hot-dip galvanized steel. B Type No. K 5 57 K 5 58 Order No. 61 699 61 99 Input 7-16 female 7/8 EIA-flange (type gas-stop) Frequency range 174 254 MHz VSWR < 1.1 Gain (ref. to λ/2 dipole) 11 at mid-band 5 Ω Vertical Max. power 2 kw 2.5 kw (higher power upon request) Weight 55 kg Wind load (at 16 km/h) frontal: 2. kn lateral: 1.15 kn 225 km/h Packing size 285 x 15 x 5 mm Material: Hot-dip galvanized steel. Weather protection: Fiberglass. A: 28 mm B: 1 mm C: 4 mm C A Mounting: Ice protection: Grounding: Combinations: By means of 8 screws M 16 x 8 to a suitable construction. Mounting hardware and mounting dimensions upon request. Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Via mounting parts. The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Scope of supply: Antenna with 8 screws M 16 x 8. Radiation Patterns (at mid-band) 64 2 1 1 in H-plane Horizontal Radiation Pattern in E-plane Vertical Radiation Pattern 68

K 52 4 5.. Directional Antenna 174 24 MHz Broadband directional antenna of hot-dip galvanized steel. Especially suitable for triangular and round masts. Type No. K 52 4 517 K 52 4 527 Order No. 61 157 61 85 B Input 7-16 female (type gas-stop) Frequenca range 174 22 MHz 22 24 MHz VSWR < 1.15 Gain (ref. to λ/2 dipole) 7 5 Ω Horizontal Max. power 2 kw (higher power upon request) Weight 2 kg Wind load (at 16 km/h) frontal: 75 N lateral: 75 N 225 km/h A Antennas 174 2 MHz Material: Hot-dip galvanized steel. Weather protection: Fiberglass. Mounting: By means of the pair of hot-dip galvanized steel clamps: K 61 12 to pipes of 6 115 mm K 61 1 to pipes of 115 21 mm (please order separately). Further mounting hardware and mounting dimensions upon request. A: 12 mm B: 86 mm C: 45 mm C Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for triangular and round masts. Scope of supply: Antenna without mounting clamps. Radiation Patterns (at mid-band) 8 56 1 1 in E-plane Horizontal Radiation Pattern in H-plane Vertical Radiation Pattern 69

K 52 4 5.. Directional Antenna 174... 2 MHz Broadband directional antenna of hot-dip galvanized steel. Especially suitable for square masts. B Type No. / Order No. 77 64 767 141 Input 7-16 female (type gas-stop) Frequenca range 174 29 MHz 22 2 MHz VSWR < 1.15 Gain (ref. to λ/2 dipole) 7.5 5 Ω Horizontal Max. power 2 kw (higher power upon request) Weight 46 kg Wind load (at 16 km/h) frontal: 125 N lateral: 625 N 225 km/h Packing size 14 x 1 x 8 mm A Material: Hot-dip galvanized steel. Protective cover: Fiberglass. C Mounting: Mounting hardware and mounting dimensions upon request. Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. A: 12 mm B: 872 mm C: 558 mm Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Particularly for square masts. Scope of supply: Antenna without mounting clamps. Radiation Patterns (at mid-band) 69 56 1 1 in E-plane Horizontal Radiation Pattern in H-plane Vertical Radiation Pattern 7

K 52 1 5.. Directional Antenna 174 2 MHz Broadband directional antenna of weather-resistant aluminum. Type No. K 52 1 57 K 52 1 51 Order No. 6 256 6 87 Input 7-16 female N female Frequency range 174 2 MHz VSWR < 1.15 Gain (ref. to λ/2 dipole) 7.5 at mid-band 5 Ω Horizontal or vertical by conversion of two clamps Max. power 5 W Weight 7 kg Wind load Horizontal (16 km/h) frontal / lateral: 44 N / 2 N Vertical (16 km/h) frontal / lateral: 44 N / 5 N Horizontal 225 km/h Vertical 2 km/h Packing size 124 x 124 x 12 mm A C B Antennas 174 2 MHz Material: Mounting: Weather-resistant aluminum. To pipes of 6 115 mm by means of mounting clamps, supplied A: 12 mm B: 12 mm C: 6 mm Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Special features: The antenna will be shipped dismounted. Radiation Patterns (at mid-band) 66 61 1 1 in E-Plane in H-Plane 71

K 5 2 5.. Directional Antenna for TV and DAB TV: 174 22 MHz / DAB: 22 24 MHz Dual-polarized antenna. Specially designed for simultaneous operation of TV in Band III and DAB in Channel 12 and Channel 1. 12 mm Type No. / Order No. 768 Input 1 x 7-16 female / horizontal (type gas-stop) 1 x 7-16 female / vertical (type gas-stop) Frequency range for horizontal polarization 1 Channel at Band III vertical polarization DAB: 22 24 MHz VSWR < 1.15 Gain (ref. to λ/2 dipole) 7.5 5 Ω TV: horizontal / DAB: vertical Max. power 2 kw per input (at 4 C ambient temperature) Weight kg Windload (at 16 km/h) frontal: 815 N lateral: 57 N 225 km/h Material: Hot-dip galvanized steel. Radome: Fiberglass Mounting: Using M16 screws (supplied) to suitable attachment construction. Antennas K 52 5. may be replaced by 768 without altering mounting fixture. Mounting dimensions upon request. Scope of delivery: Antenna supplied without clamps. Grounding: Via mounting parts. Radiation Patterns for horizontal polarization (at mid-band) Radiation Patterns for vertical polarization (at mid-band) 64 54 54 66 1 1 1 1 E-plane Horizontal Radiation Pattern H-plane Vertical Radiation Pattern H-plane Horizontal Radiation Pattern E-plane Vertical Radiation Pattern 72

K 5 2 5.. Directional Antenna for TV and DAB/DMB 174 22 MHz (24 MHz) Dual-polarized antenna (horizontal/vertical). Optionally circular or slant polarization. 1 mm Type No. / Order No. 75 185 Input Frequency range for vertical polarization VSWR Gain (ref. to λ/2 dipole) Max. power Weight Windload (at 16 km/h) 2 x 7-16 female (type gas-stop) linear: horizontal, vertical, slant circular 174 22 MHz 174 24 MHz < 1.2 (linear polarization) < 1.1 (circular polarization) 7.5 (linear polarization) 4.5 (circular polarization) 5 Ω 2 kw per input (at 4 C ambient temperature) 5 kg frontal: 68 N lateral: 6 N 225 km/h Antennas 174 2 MHz Material: Hot-dip galvanized steel. Radome: Fiberglass Mounting: Using M16 screws (supplied) to suitable attachment construction. Mounting dimensions upon request. Scope of delivery: Antenna supplied without clamps. Grounding: Via mounting parts. Radiation Patterns for horizontal polarization (at mid-band) Radiation Patterns for vertical polarization (at mid-band) 65 55 6 65 1 1 1 1 E-plane Horizontal Radiation Pattern H-plane Vertical Radiation Pattern H-plane Horizontal Radiation Pattern E-plane Vertical Radiation Pattern 7

K 52 4 5.. Directional Antenna 174... 2 MHz 5 element broadband Yagi antenna of weather-proof aluminum. Component for low power transmitting antennas. Type No. K 52 4 517 K 52 4 527 Order No. 6 265 6 267 A Frequency range 174 22 MHz 22 2 MHz (ch = channel) (ch 5 ch 8) (ch 9 ch 12) Dimensions A 9 mm 81 mm B 885 mm 765 mm Input 7-16 female Gain (ref. to λ/2 dipole) 6 VSWR < 1.15 5 Ω Horizontal Max. power 1 W (higher power upon request) Weight 5 kg Wind load (at 16 km/h) frontal: 114 N 12 N lateral: 12 N 91 N 225 km/h Packing size 97 x 2 x 15 mm Lengths see table B Material: Mounting: Grounding: Combinations: Special features: Weather-proof aluminum. Radiator in fiberglass radome. To pipes of 6 115 mm by means of mounting clamps, supplied. Via mounting parts. The antenna is especially suitable as a component in arrays to achieve various radiation patterns. The antenna will be shipped dismounted. Radiation Patterns (at mid-band) 55 11 1 1 in E-plane Horizontal Radiation Pattern in H-plane Vertical Radiation Pattern 74

K 5 4 5.. Directional Antenna for DAB 215 242 MHz 5 element broadband Yagi antenna of weather-proof aluminum. Component for low power transmitting antennas. Especially for DAB. Type No. / Order No. 768 494 75 1 A Frequency range 215 242 MHz 22 2 MHz Input 7-16 female Gain (ref. to λ/2 dipole) 6 VSWR < 1.2 5 Ω Vertical Max. power 4 W Weight 5 kg Wind load (16 km/h) frontal: 1 N lateral: 15 N 225 km/h Packing size 97 x 2 x 15 mm B Antennas 174 2 MHz Material: Weather-proof aluminum. Radiator in fiberglass radome. Mounting: To pipes of 6 115 mm by means of mounting clamps, supplied. Attention: Mounting must be done with waterhole downwards. A: 8 mm B: 765 mm waterhole Grounding: Via mounting parts. Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. Special features: The antenna will be shipped dismounted. Radiation Patterns (at mid-band) 11 55 1 1 in H-Plane Horizontal Radiation Pattern in E-Plane Vertical Radiation Pattern 75

K 52 17 5.. Directional Antenna 174 2 MHz 15 element broadband Yagi antenna of weather-proof aluminum. 11 Lengths see table Mounting flange 85 ø 11 11 85 mm Type No. K 52 17 517 K 52 17 527 K 52 17 57 Order No. 6 89 6 891 6 892 Radiation Patterns (at mid-band) Frequency range 174 188 MHz 188 29 MHz 29 2 MHz Input 7-16 female VSWR < 1.15 Gain (ref. to λ/2 dipole) 8 5 Ω Horizontal or vertical Max. power 1 W (higher power upon request) Weight 14 kg 12.7 kg 12 kg Dimensions (Lengths) L1 2 mm 185 mm 17 mm L2 12 mm 11 mm 95 mm L 9 mm 85 mm 75 mm Wind load (at 16 km/h) frontal / lateral: frontal / lateral: frontal / lateral: horizontal: 64 N / 1 N N / 29 N 29 N / 28 N vertical: 427 N / 54 N 44 N / 49 N 64 N / 427 N horizontal: 225 km/h 225 km/h 225 km/h vertical: 19 km/h 225 km/h 225 km/h Packing size 24 x 17 x 17 mm 19 x 17 x 17 mm 175 x 17 x 17 mm 1 1 in E-plane 62 6 Material: Elements: Weather-proof aluminum. Dipole cover: Fiberglass. Support and flange: Hot-dip galvanized steel. in H-plane Mounting: By means of mounting flange, supplied. Grounding: Via mounting parts. Combinations: Two or more antennas can be combined to achieve higher gain and longer, narrower beam width. Special features: The antenna is shipped dismounted. 76

K 52 14 5.. Directional Antenna 174 2 MHz 16 element Yagi antenna of weather-proof aluminum. A C D B Lengths see table Antennas 174 2 MHz Type No. K 52 14 517 K 52 14 527 Order No. 6 26 6 28 Frequency range 174 22 MHz 22 2 MHz (ch = channel) (ch 5 ch 8) (ch 9 ch 12) Input 7-16 female VSWR < 1.15 Gain (ref. to λ/2 dipole) 11 5 Ω Horizontal Max. power 1 W (higher power upon request) Weight 12 kg 11 kg Dimensions (Lengths) A 6 mm 29 mm B 26 mm 2 mm C 88 mm 76 mm D 955 mm 825 mm Wind load (at 14 km/h) frontal: 21 N 185 N lateral: 29 N 25 N 14 km/h Packing size 5 x 17 x 17 mm 288 x 17 x 17 mm Radiation Patterns (at mid-band) 1 44 in E-plane Horizontal Radiation Pattern 48 Material: Support: Weather-proof aluminum. Dipole cover: Fiberglass. Clamp: Hot-dip galvanized steel. 1 Mounting: Grounding: To pipes of 6 115 mm by means of mounting clamp, supplied. Via mounting parts. in H-plane Vertical Radiation Pattern Combinations: Two or more antennas can be combined to achieve higher gain and longer, narrower beam width. Special features: The antenna is shipped dismounted. 77

K 52 7 5.. Directional Antenna 174 2 MHz Particularly light 15 element Yagi antenna of weather-proof aluminum. B C A Lengths see table Type No. K 52 7 517 K 52 7 527 K 52 7 57 Order No. 61 515 61 516 61 517 Radiation Patterns (at mid-band) Frequency range 174 188 MHz 188 29 MHz 29 2 MHz Input 7-16 female VSWR < 1.2 Gain (ref. to λ/2 dipole) 8 5 Ω Horizontal or vertical by conversion of the U-bolts Max. power 1 W (higher power upon request) Weight 7.5 kg 7.2 kg 6.8 kg Dimensions (Lengths) A 21 mm 1865 mm 172 mm B 12 mm 94 mm 84 mm C 9 mm 85 mm 76 mm Wind load (at 16 km/h) frontal / lateral: frontal / lateral: frontal / lateral: horizontal: 29 N / 279 N 222 N / 267 N 199 N / 25 N vertical: 29 N / 1 N 222 N / 29 N 199 N / 25 N 225 km/h Packing size 24 x 17 x 17 mm 19 x 17 x 17 mm 176 x 17 x 17 mm 1 in E-plane 5 68 Material: Mounting: Grounding: Weather-proof aluminum: Dipole cover: Hostalen. To pipes of 57 15 mm by means of supplied U-bolts. Via mounting parts. 1 in H-plane Combinations: Two or more antennas can be combined to achieve higher gain and longer, narrower beam width. Special features: The antenna is shipped dismounted. 78

K 52 22 5.. Directional Antenna 174 2 MHz Logarithmic-periodic broadband directional antenna with high side-lobe suppression. Especially rugged design of hot-dip galvanized steel. Type No. K 52 22 57 K 52 22 51 Order No. 6 24 61 4 Input 7-16 female N female Frequency range 174 2 MHz VSWR < 1.2 Gain (ref. to λ/2 dipole) 8.5 at mid-band 5 Ω Side-lobe suppression > 25 Horizontal or vertical by conversion of two clamps Max. power 1 kw (higher power upon request) Weight 27 kg Wind load (at 16 km/h) horizontal: frontal / lateral: 25 N / 5 N vertikal: frontal / lateral: 25 N / 1 N 225 km/h Packing size 245 x 29 x 11 mm A: 2 mm B: 89 mm A B Antennas 174 2 MHz Material: Mounting: Grounding: Combinations: Hot-dip galvanized steel. To pipes of 6 115 mm by means of mounting clamps, supplied. Via mounting parts. Several antennas can be combined to increase the gain and to produce radiation patterns with very high side-lobe suppressions. Radiation Patterns (at mid-band) 5 68 1 1 in E-plane in H-plane 79

K 5 6 5.. Dipole Antenna for DAB 216 24 MHz Dipole antenna for side-mounting to masts. C Type No. / Order No. 769 6 77 61 Input 7-16 female 7-16 female (type gas-stop) Frequency range 216 24 MHz 184 2 MHz VSWR < 1.2 < 1. Gain (ref. to λ/2 dipole) 5.5 in preferred direction 5 Ω Vertical Max. power 2 kw (at 4 C ambient temperature) Weight 15 kg Wind load (16 km/h) frontal: 24 N lateral: 44 N 225 km/h Packing size 21 x 42 x 16 mm A B Material: Mounting: Hot-dip galvanized steel. Radome: Fiberglass. Laterally using 8 screws M 12 x 5 to suitable flange (see draft). D Ice protection: Grounding: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Via mounting parts. A: 225 mm B: 11 mm C: 72 mm D: 15 mm Note: The radiation in the mast direction will be reduced proportionally to the size of the mast. Radiation Patterns (at mid-band) Flange 2 1 in H-plane Horizontal Radiation Pattern 1 in E-plane Vertical Radiation Pattern 8

K 5 2 5.. Omnidirectional Antenna for DAB 216 24 MHz Type No. / Order No. 772 899 772 9 Input 7-16 female (type gas-stop) Frequency range 216 24 MHz VSWR < 1.2 Gain (ref. λ/2 dipole) 6 5 Ω Vertical Max. power 1 kw 2 kw (higher power upon request) Weight 7 kg 67 kg Windload (at 16 km/h) 5 N 9 N 2 km/h Length 29 mm 5 mm Radome diameter 186 mm Packing size x 4 x 4 mm 52 x 4 x 4 mm Antennas 174 2 MHz Material: Mounting: Radiator: Hot-dip galvanized steel. Radome: Fiberglass, brown. Antenna base: Aluminum. With standard flange with 2 mm diameter. Attention: The aluminum flange may only be mounted to a flat base-plate (max. unevenness.5 mm) with a suitable drilled hole in the center for the both 7-16 connectors. Fastening torque M A = 5 Nm (MoS 2 -lubricated; washer acc. DIN 125 between casted flange and bolt head) Grounding: Remark: Continuous earth connection between antenna tip and base. Special versions with higher input power or modified frequency range or electrical beam tilt are available upon request. Bottom view Vertical Radiation Patterns (at mid-band, beamtilt 1 ) 7-16 female 28 14 1 1 18 772 899 772 9 28 2 81

K 5 2 5.. Omnidirectional Antenna for DAB 216 24 MHz Type No. / Order No. 75 126 75 125 Input 2 x 7-16 female (type gas-stop) Frequency range 216 24 MHz VSWR < 1.2 Gain (ref. λ/2 dipole) 6 5 Ω Vertical Max. power 2 x 1 kw 2 x 2 kw (at 4 C ambient temperature) Weight 42 kg 7 kg Windload (at 16 km/h) 5 N 9 N 2 km/h Length 29 mm 5 mm Radome diameter 186 mm Packing size x 4 x 4 mm 52 x 4 x 4 mm Material: Mounting: Radiator: Hot-dip galvanized steel. Radome: Fiberglass, brown. Antenna base: Aluminum. With standard flange with 2 mm diameter. Attention: The aluminum flange may only be mounted to a flat base-plate (max. unevenness.5 mm) with a suitable drilled hole in the center for the both 7-16 connectors. Fastening torque M A = 5 Nm (MoS 2 -lubricated; washer acc. DIN 125 between casted flange and bolt head) Grounding: Remark: Continuous earth connection between antenna tip and base. Special versions with higher input power or modified frequency range or electrical beam tilt are available upon request. Vertical Radiation Patterns (at mid-band) Bottom view 2 x 7-16 female 28 14 1 1 18 75 126 75 125 28 2 82

K 5 1 5.. Directional Antenna for DAB 216 24 MHz Especially designed for operation in DAB. Suitbale for omnidirectional pattern with 5 panels in one bay. Type No. / Order No. 776 64 Input 7-16 female (type gas-stop) Frequency range 216 24 MHz (219 2 MHz) VSWR < 1.15 (< 1.1) Gain (ref. to λ/2 dipole) 11.5 at mid-band 5 Ω Vertical Max. power 2 kw (higher power upon request) Weight 5 kg Wind load (at 16 km/h) frontal: 15 N lateral: 12 N 225 km/h Packing size 25 x 1 x 68 mm Antennas 174 2 MHz Material: Hot-dip galvanized steel. Weather protection: Fiberglass. Mounting: By means of 4 screws M 16 x 4 to a suitable construction. Mounting hardware upon request. Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. 5 Grounding: Via mounting parts. 18 Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation patterns. 24 7-16 female 12 Scope of supply: Antenna with 4 screws M 16 x 4. 6 Radiation Patterns (at mid-band) 12 5 25 52 28 1 1 in H-plane Horizontal Radiation Pattern in E-plane Vertical Radiation Pattern 8

K 5 7 5.. Omnidirectional Antenna 22 2 MHz Omnidirectional broadband antenna for mounting on the mast top. Type No. / Order No. 766 614 ø 7 Input 7-16 female Frequency range 22 2 MHz VSWR < 1. 5 Ω Gain (ref. λ/2 dipole) Vertical Max. power 1 kw Weight 6 kg Wind load approx. 6 N (at 16 km/h) 225 km/h 174 Material: Hot-dip galvanized steel. All screws and nuts: Stainless steel. Mounting: Grounding: To standard flange with diameter 1 mm, with 4 screws M 12. Via mounting parts. ø 14 (4x) ø 1 ø 1 Radiation patterns (at mid-band) 78 1 1 1 1 H-plane Horizontal radiation pattern E-plane Vertical radiation pattern ø 1 ø 1 Flange 84

Antenna Systems 47 862 MHz Systems 47 862 MHz 85

TV Transmitting Antenna with panels K 72 4.. K 72 2 4.. or K 7 4.. K 7 2 4.. 47 862 MHz Antenna systems consisting of dipole panels K 72 4.. K 72 2 4.. or K 7 4.. K 7 2 4.. for various radiation patterns. The feeder network is made up of coaxial power splitters and flexible connecting cables in accordance with the radiation patterns specification and the transmitting power. Input Frequency range VSWR Internal connections Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Pressurization Painting Structure Grounding Connectors according to IEC, EIA or DIN. 47 862 MHz < 1.5 in the operating channels after tuning. 5 Ω Horizontal with dipole panels K 72 4.. K72 2 4.. or vertical with dipole panels K 7 4.. K 7 2 4.. Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. According to customer s requirements. Null fill and beam tilt upon request. Omnidirectional, directional or custom-designed. Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. Splitters and connecting cables can be supplied with dry air (please specify when ordering). If required, the antenna is painted in aviation warning colours. 2 versions are available: a) Panels mounted on hot-dip galvanized steel spine. b) Panels mounted inside self-supporting fiberglass cylinder (1.6 m ) Via mounting parts. As required. H 115 mm No. Panels Gain* Weight Antenna Windload / kn** of per (at mid-band) (without height H (v = 16 km/h) bays bay times mounting m with with hardware) spine cylinder kg 1.6 m 2 15.2.1 12 4 1.6 22.9 16 4.45 6. 6. 4 12. 17. 21 2 17. 5.1 17 6 15.4 4.7 24 6.75 9.5 9. 4 14.1 25.7 2 18.2 66.1 24 8 16.6 45.7 2 9.5 1. 12. 4 15..9 42 2 2. 1. 5 12 18.4 69.2 49 1.65 2.5 18. 4 17.1 51. 67 2 21.2 11.8 45 16 19.6 91.2 69 18.25 28. 24. 4 18. 67.6 89 * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). ** Average values, depending on design and arrangement. 86

TV Transmitting Antenna with panels K 72 4.. K 72 2 4.. or K 7 4.. K 7 2 4.. 47 862 MHz Horizontal Radiation Patterns Examples of typical horizontal antenna arrays and their horizontal radiation patterns for minimal mast dimensions. Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. Equal power splitting 1 E rel 4 bays 5 5 α 1 1 E rel 8 bays Systems 47 862 MHz 5 1 1 5 α 1 Equal power splitting Different power splitting 4/1 P 1 E rel 12 bays 1/1 P 1/1 P 5 4/1 P 5 α 1 1 E rel 16 bays 5 1 1 5 α 1 *) without null fill with null fill and beam tilt 87

TV Transmitting Antenna (Superturnstile Antenna) 47 862 MHz K 72 2 4.. Superturnstile antenna in a self-supporting fiberglass cylinder with 1.6 m diameter. Input Frequency range VSWR Max. power Vertical radiation pattern Horizontal radiation pattern Half antenna splitting Internal connections Structure Mounting Ice protection Grounding Connectors according to IEC, EIA or DIN. 47 862 MHz < 1.5 in operating channels 5 Ω Horizontal According to customer s requirements, 1 kw max. per bay. Null fill and beam tilt upon request. Omnidirectional Upon request, the antenna can be divided into 2 halves (for measurement and maintenance). The 2 halves are connected by a 2-way power splitter or patch panel. The radiating elements are fed with coaxial connecting cables and hybrid couplers. Connectors according to IEC, EIA or DIN are used throughout the system, allowing easy assembly and maintenance. Superturnstile antenna in self-supporting fiberglass-cylinder. Up to 16 bays may be stacked. On top of existing structure by means of a flange. Fiberglass-cylinder (= supporting structure) Via mounting parts resp. via 4 grounding ropes at the exterior cylinder-surface. H 1125 mm No. Gain* Weight Antenna Windload of (at mid-band) (with cylinder) height H (v = 16 km/h) bays times kg m kn 2 7. 5. 4 2.25. 4 1. 1. 8 4.5 6. 8 1. 2. 16 9. 12. 12 14.8.2 26 1.5 18. 16 16. 9.8 6 18. 24. * Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease in case of null fill in the vertical radiation pattern are not considered. Approximate values for gain decrease: cable attenuation:.2.5 null fill:. 1. Gain figures are valid for the direction of maximum radiation (see diagrams on following page). 88

TV Transmitting Antenna (Superturnstile Antenna) 47 862 MHz K 72 2 4.. Typical Horizontal Radiation Pattern (at mid-band) Vertical Radiation Patterns Examples of typical vertical radiation patterns*) for several bays of identical, vertically stacked antenna arrays. 1 E rel 4 bays 5 1 5 α 1 1 E rel 8 bays Systems 47 862 MHz 5 5 α 1 1 E rel 12 bays 5 5 α 1 1 E rel 16 bays 5 5 α 1 *) without null fill with null fill and beam tilt 89

9

Antennas for TV in UHF Band 47 862 MHz Model Types: K 72 2 4.., K 72 2 4.., K 72 1 4.., K 72 1 5.., K 72 2 4.., K 72 6 4.., K 7 4.., K 7 5.., K 7 1 4.., K 7 1 6.., K 7 2 4.., K 7 4.., Type No. Description Frequency range Gain Page K 72 6 4. Directional Antenna, aluminum 47 79 MHz 8. horizontal 9 K 72 1 4. Directional Antenna, aluminum 47 86 MHz 11. horizontal 94 715 22 Directional Antenna, aluminum 47 86 MHz 11. horizontal 94 774 8 Directional Antenna, aluminum 47 86 MHz 11. horizontal 95 774 9 Directional Antenna, aluminum 47 86 MHz 11. horizontal 95 774 4 Directional Antenna, aluminum 47 86 MHz 11. horizontal 95 774 41 Directional Antenna, aluminum 47 86 MHz 11. horizontal 95 774 46 Directional Antenna, aluminum 47 86 MHz 11. horizontal 95 774 47 Directional Antenna, aluminum 47 86 MHz 11. horizontal 95 774 52 Directional Antenna, aluminum 47 86 MHz 11. horizontal 96 776 165 Directional Antenna, aluminum 47 86 MHz 11. vertical 97 776 166 Directional Antenna, aluminum 47 86 MHz 11. vertical 97 776 167 Directional Antenna, aluminum 47 86 MHz 11. vertical 97 776 168 Directional Antenna, aluminum 47 86 MHz 11. vertical 97 776 22 Directional Antenna, aluminum 47 86 MHz 11. vertical 97 776 2 Directional Antenna, aluminum 47 86 MHz 11. vertical 97 K 7 1 4. Directional Antenna, aluminum 47 86 MHz 11. vertical 98 769 71 Directional Antenna, aluminum 47 86 MHz 11. vertical 99 75 182 Directional Antenna, aluminum 47 86 MHz 11. vertical 1 75 18 Directional Antenna, aluminum 47 86 MHz 11. vertical 1 75 145 Directional Antenna, aluminum 47 86 MHz 1.5 vertical 11 75 146 Directional Antenna, aluminum 47 86 MHz 1.5 vertical 11 75 147 Directional Antenna, aluminum 47 86 MHz 1.5 vertical 11 75 116 Directional Antenna, aluminum 47 86 MHz 11. horizontal 12 75 117 Directional Antenna, aluminum 47 86 MHz 11. horizontal 12 75 11 Directional Antenna, aluminum 47 86 MHz 11. horizontal 12 75 12 Directional Antenna, aluminum 47 86 MHz 11. horizontal 12 772 549 Directional Antenna, aluminum 47 86 MHz 11. horizontal 1 772 55 Directional Antenna, aluminum 47 86 MHz 11. horizontal 1 772 999 Directional Antenna, aluminum 47 86 MHz 11. horizontal 1 77 Directional Antenna, aluminum 47 86 MHz 11. horizontal 1 77 2 Directional Antenna, aluminum 47 86 MHz 11. horizontal 1 77 Directional Antenna, aluminum 47 86 MHz 11. horizontal 1 75 112 Directional Antenna, aluminum 47 86 MHz 11. horizontal 1 75 11 Directional Antenna, aluminum 47 86 MHz 11. horizontal 1 K 72 1 57 Directional Antenna, aluminum 646 86 MHz 1. horizontal 14 776 15 Directional Antenna, aluminum 646 86 MHz 1. horizontal 14... Antennas 47 862 MHz 91

Antennas for TV in UHF Band 47 86 MHz Type No. Description Frequency range Gain Page K 72 2 4. Log.-per Directional Antenna, 47 86 MHz 9. horizontal 15 aluminum or vertical 761 27 Log.-per Directional Antenna, 47 86 MHz 9. horizontal 15 aluminum or vertical 767 6 Omnidirectional Antenna, aluminum 47 86 MHz 5. horizontal 16 77 881 Omnidirectional Antenna, aluminum 47 86 MHz 8. horizontal 16 771 4 Omnidirectional Antenna, aluminum 47 86 MHz 11. horizontal 17 775 861 Omnidirectional Antenna, aluminum 47 86 MHz 11. horizontal 17 75 16 Omnidirectional Antenna, aluminum 47 72 MHz. 4.5 vertical 18 75 162 Omnidirectional Antenna, aluminum 47 72 MHz 5.5 7. vertical 19 75 1112 Omnidirectional Antenna, 47 52 MHz 6.5 vertical 11 copper and brass 75 111 Omnidirectional Antenna, 52 54 MHz 7. vertical 11 copper and brass 75 1114 Omnidirectional Antenna, 54 574 MHz 7.5 vertical 11 copper and brass 75 1115 Omnidirectional Antenna, 574 614 MHz 7.5 vertical 11 copper and brass 75 1116 Omnidirectional Antenna, 614 662 MHz 8. vertical 11 copper and brass 75 1117 Omnidirectional Antenna, 654 72 MHz 8. vertical 11 copper and brass 75 1118 Omnidirectional Antenna, 694 75 MHz 8.5 vertical 11 copper and brass 75 112 Directional Indoor Antenna, brass 47 54 MHz 5. vertical 111 75 1122 Directional Indoor Antenna, brass 54 614 MHz 5. vertical 111 75 1124 Directional Indoor Antenna, brass 614 72 MHz 5. vertical 111 75 1125 Directional Indoor Antenna, brass 72 75 MHz 5. vertical 111 75 11 Omnidirectional Indoor Antenna, 47 558 MHz vertical 112 aluminum 75 111 Omnidirectional Indoor Antenna, 55 68 MHz vertical 112 aluminum 75 112 Omnidirectional Indoor Antenna, 574 72 MHz vertical 112 aluminum 75 1128 Bidirectional Antenna, 47 86 MHz 2 vertical 11 tin plated copper 92

K 72 6 4. Directional Antenna 47 79 MHz Horizontally polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Type No. K 72 6 47 K 72 6 41 Order No. 61 787 61 921 A Input 7-16 female N female Frequency range 47 79 MHz VSWR s < 1.12 Gain (ref. λ/2 dipole) 8 at mid-band 5 Ω Horizontal Max. power 5 W (higher power upon request) Weight 6 kg Wind load (at 16 km/h) Frontal: 25 N Rearside: 75 N Lateral: 125 N 225 km/h Packing size 567 x 567 x 294 mm C B Material: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Colour: White, upon request orange. Attachment elbow: Hot-dip galvanized steel. A = B: 5 mm C: 19 mm Attachment: (please order separately) E.g. by using clamps K 61 14 to tubular masts of 4 521 mm diameter. Further attachment parts and mounting dimensions upon request. Antennas 47 862 MHz Grounding: Via mounting parts. Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of delivery: Directional antenna with one weather protection unit each for straight connectors and elbow connectors. Radiation Patterns (at mid-band) 61 61 Weather protection 1 1 4 19 mm in E-plane Horizontal Radiation Pattern in H-plane Vertical Radiation Pattern All dimensions in mm 9

K 72 1 4.. Directional Antenna 47 86 MHz Horizontally or vertically polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Type No. K 72 1 47 715 22 Order No. 61 417 5 Input 7-16 female 1- female Frequency range 47 86 MHz VSWR s < 1.1 Gain (ref. λ/2 dipole) 11 at mid-band Horizontal Max. power 1 kw 2 kw Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Weight 12 kg Packing size 162 x 562 x 275 mm Height/width/depth 1 x 5 x 19 mm 1 Horizontal polarization Material: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment elbow: Hot-dip galvanized steel. 19 Attachment: (please order separately) E.g. by using clamps K 61 14 to tubular masts of 4 521 mm diameter. Further attachment parts and mounting dimensions upon request. Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of supply: Directional antenna with one weather protection unit each for straight connectors and elbow connectors. Weather protection Radiation Patterns (at mid-band) 91 62 28 19 1 1 K 72 1 47 Horizontal Pattern Vertical Pattern All dimensions in mm 94

K 72 1 4.. Directional Antenna 47 86 MHz Horizontally polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Similar to type K 72 1 47. 5 Type No. white 774 4 774 46 774 8 Order No. orange 774 41 774 47 774 9 Input (from below) 7-16 female 1- female 7/8 EIA-flange Frequency range 47 86 MHz VSWR < 1.1 Gain (ref. λ/2 dipole) 11 at mid-band 5 Ω Horizontal Max. power 1 kw 2 kw 1.5 kw Weight 12 kg Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Packing size 162 x 562 x 294 mm Height/width/depth 1 x 5 x 19 mm 19 1 Horizontal polarization Material: Attachment: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment plate: Hot-dip galvanized steel. Using M 8 x 5 screws (supplied) to suitable attachment construction. Mounting dimensions upon request. Antennas 47 862 MHz Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of supply: The 7-16 female connector is supplied with a weather protection unit. Radiation Patterns (at mid-band) Weather protection 12 62 28 1 1 in E-plane Horizontal Pattern in H-plane Vertical Pattern 774 4 All dimensions in mm 64 95

K 72 1 4.. Directional Antenna 47 86 MHz Horizontally polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Similar to type K 72 1 47. 5 Type No. / Order No. 774 52 Input (from below) 7-16 female Horizontal VSWR s < 1.1 Gain (ref. λ/2 dipole) 11 at mid-band Frequency range 47 86 MHz Max. power 1 kw Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Weight 12 kg Packing size 162 x 562 x 294 mm Height/width/depth 1 x 5 x 19 mm 1 Horizontal polarization Material: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Colour: White, upon request orange. Attachment elbow and attachment plate: Hot-dip galvanized steel. 19 Attachment: (please order separately) E.g. by using clamps K 61 14 to tubular masts of 4 521 mm diameter. Further attachment parts and mounting dimensions upon request. Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of supply: Directional antenna with one weather protection unit. Weather protection Radiation patterns (at mid-band) 91 62 28 1 1 19 in E-plane Horizontal Pattern in H-plane Vertical Pattern All dimensions in mm 96

K 7 1 4.. Directional Antenna 47 86 MHz Vertically polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Similar to type K 7 1 47. 5 Type No. white 776 165 776 167 776 22 Order No. orange 776 166 776 168 776 2 Input (from below) 7-16 female 1- female 7/8 EIA-flange Frequency range 47 86 MHz VSWR < 1.12 Gain (ref. λ/2 dipole) 11 at mid-band 5 Ω Vertical Max. power 1 kw 2 kw 1.5 kw Weight 12 kg Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Packing size 162 x 562 x 294 mm Height/width/depth 1 x 5 x 19 mm 19 1 Vertical polarization Material: Attachment: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment plate: Hot-dip galvanized steel. Using M 8 x 5 screws (supplied) to suitable attachment construction. Mounting dimensions upon request. Antennas 47 862 MHz Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of supply: The 7-16 female connector is supplied with a weather protection unit. Weather protection 52 Radiation Patterns (at mid-band) 12 62 28 1 1 64 in H-plane Horizontal Pattern in E-plane Vertical Pattern All dimensions in mm 97

K 7 1 4.. Directional Antenna 47 86 MHz Horizontally or vertically polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Type No. K 7 1 41 K 7 1 47 Order No. 61 492 61 79 5 Input N female 7-16 female Frequency range 47 86 MHz VSWR s < 1.12 Gain (ref. λ/2 dipole) 11 at mid-band Vertical Max. power.5 kw 1 kw Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Weight 12 kg Packing size 162 x 562 x 275 mm Height/width/depth 1 x 5 x 19 mm 1 Vertical polarization Material: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment elbow: Hot-dip galvanized steel. 19 Attachment: E.g. by using clamps K 61 14 to tubular (please order masts of 4 521 mm diameter. separately) Further attachment parts and mounting dimensions upon request. Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of supply: Directional antenna with one weather protection unit each for straight connectors and elbow connectors. Weather protection 52 Radiation Patterns (at mid-band) 91 62 28 19 1 1 Horizontal Pattern Vertical Pattern All dimensions in mm 98

19 K 7 1 4.. Directional Antenna 47 86 MHz Vertically polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Similar to type K 7 1 47. 5 Type No. / Order No. 769 71 Input 7-16 female Frequency range 47 86 MHz VSWR < 1.12 Gain (ref. λ/2 dipole) 11 at mid-band 5 Ω Vertical Max. power 1 kw Weight 12 kg Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Packing size 162 x 562 x 294 mm Height/width/depth 1 x 5 x 19 mm 1 Vertical polarization Material: Attachment: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment plate: Hot-dip galvanized steel. Using M 8 x 5 screws (supplied) to suitable attachment construction. Antennas 47 862 MHz Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of supply: The 7-16 female connector is supplied with a weather protection unit. Weather protection 52 Radiation Patterns (at mid-band) 12 19 62 28 1 1 64 in H-plane Horizontal Pattern in E-plane Vertical Pattern All dimensions in mm 99

K 7 1 4.. Directional Antenna 47 86 MHz Vertically polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. 5 Type No. white 75 182 Order No. orange 75 18 Input 7/8 EIA flange Frequency range 47 86 MHz VSWR s < 1.12 Gain (ref. λ/2 dipole) 11 at mid-band 5 Ω Vertical Max. power 1.5 kw Weight 12 kg Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Packing size 162 x 562 x 294 mm Height/width/depth 1 x 5 x 19 mm 19 1 Vertical polarization Material: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment plate: Hot-dip galvanized steel. Attachment: Using M8 x 5 screws (supplied) to suitable attachment construction. Mounting dimensions upon request. Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. 7 /8 EIA flange 52 Radiation Patterns (at mid-band) 12 62 28 1 1 in H-plane Horizontal Pattern in E-plane Vertical Pattern All dimensions in mm 64 1

K 7 1 4.. Directional Antenna 47 86 MHz Vertically polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Especially suitable for ortogonal steel spines. Type No. grey 75 145 Order No. white 75 146 orange 75 147 Input 7-16 female Frequency range 47 86 MHz VSWR < 1.15 Gain (ref. λ/2 dipole) 1.5 at mid-band 5 Ω Vertical Max. power 1 kw Weight 1 kg Wind load (at 16 km/h) Frontal: 41 N Lateral: 25 N 225 km/h Packing size 114 x x 24 mm Height/width/depth 145 x 2 x 19 mm Vertical polarization Material: Attachment: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment plate: Hot-dip galvanized steel. Using M 8 x 5 screws (supplied) to suitable attachment construction. 74 54 Antennas 47 862 MHz Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for multi-panel arrangements. 145 12 52 Radiation Patterns (at mid-band) 7 28 2 1 1 Horizontal Pattern Vertical Pattern All dimensions in mm 11

K 72 2 4.. Directional Antenna 47 86 MHz Horizontally polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. 5 Type No. white 75 11 75 116 Order No. orange 75 12 75 117 Input 7/8 EIA flange 1 5 /8 EIA flange Frequency range 47 86 MHz VSWR s < 1.1 Gain (ref. λ/2 dipole) 11 at mid-band 5 Ω Horizontal Max. power 1.5 kw kw Weight 1 kg 1.5 kg Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Packing size 162 x 562 x 294 mm Height/width/depth 1 x 5 x 19 mm 19 1 Horizontal polarization Material: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment plate: Hot-dip galvanized steel. Attachment: Using M 8 x 5 screws (supplied) to suitable attachment construction. Mounting dimensions upon request. Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. 7 /8 EIA flange Radiation Patterns (at mid-band) 12 56 26 1 1 in E-plane Horizontal Pattern in H-plane Vertical Pattern 75 11 75 12 All dimensions in mm 64 12

K 72 2 4.. Directional Antenna 47 86 MHz Horizontally polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. 5 Type No. white 772 549 75 112 77 77 Order No. orange 772 55 75 11 772 999 77 2 Input (from below) 7-16 female 7/8 EIA 1- female 1 5 /8 EIA flange flange Frequency range 47 86 MHz VSWR s < 1.1 Gain (ref. λ/2 dipole) 11 at mid-band 5 Ω Horizontal Max. power 1 kw 1.5 kw 2 kw kw Weight 9.5 kg 1 kg Wind load (at 16 km/h) Frontal: 565 N Rearside: 815 N Lateral: 25 N 225 km/h Packing size 162 x 562 x 294 mm Height/width/depth 1 x 5 x 19 mm 19 1 Material: Attachment: Reflector screen and dipoles: Weather-resistant aluminum. Protective cover: Fiberglass. Attachment plate: Hot-dip galvanized steel. Using M 8 x 5 screws (supplied) to suitable attachment construction. Mounting dimensions upon request. Horizontal polarization Antennas 47 862 MHz Grounding: Via mounting parts. Ice protection: The dipoles remain fully functioning even in icy conditions as the fiberglass cover protects the whole antenna and also the antenna is of a very robust design. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of supply: The 7-16 female connector is supplied with a weather protection unit. Weather protection Radiation Patterns (at mid-band) 12 56 26 1 1 in E-plane Horizontal Pattern in H-plane Vertical Pattern 772 549 772 55 All dimensions in mm 64 1

K 72 1 5. Directional Antenna 675 86 MHz Horizontally polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. B Type No. K 72 1 57 776 15 Order No. 62 24 Input 7-16 female 1- female Frequency range 646 86 MHz 646 86 MHz VSWR < 1.1 Gain (ref. λ/2 dipole) 1 at mid-band 5 Ω Horizontal Max. power 1 kw 2 kw Weight 8 kg Wind load (at 16 km/h) Frontal: 15 N Rearside: 5 N Lateral: 16 N 225 km/h Packing size 97 x 41 x 24 mm A Horizontal polarization Material: Reflector screen and dipoles: Weather-resistant aluminum. Radome: Fiberglass, colour: White, upon request orange. Fittings: Hot-dip galvanized steel. A: 88 mm B: 15 mm C: 15 mm C Attachment: E.g. by using clamps K 61 14 to tubular (please order masts of 4 521 mm diameter. separately) Further attachment parts and mounting dimensions upon request. Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty construction and the fiberglass covers for the feeding points. Grounding: Via mounting parts. Combinations: The antenna is particularly suitable for use in combinations in order to achieve various radiation patterns. Scope of delivery: Directional antenna with one weather protection unit each for straight connectors and elbow connectors. Radiation Patterns (at mid-band) 69 28 1 1 Horizontal Radiation Pattern Vertical Radiation Pattern 14

K 72 2 4. Directional Antenna 47 86 MHz Logarithmic-periodic broadband directional antenna in fiberglas radome. High side-lobe suppression. C Type No. 761 27 K 72 2 47 K 72 2 41 Order No. 61 584 61 695 Input 7-16 female 7-16 female N female Frequency range 47 86 MHz VSWR < 1.25 Gain (ref. to λ/2 dipole) 9 at mid-band 5 Ω Side-lobe suppression > 2 at 47 5 MHz > 25 at 5 86 MHz Either horizontal or vertical by repositioning two clamps Max. power 1 W W W Weight 9 kg Wind load (at 16 km/h) For horizontal pol.: frontal/lateral: 6 / 12 N For vertical pol.: frontal/lateral: 6 / 5 N For horizontal pol.: 225 km/h For vertical pol.: 18 km/h Packing size 1172 x 72 x 224 mm A: 115 mm B: 5 mm C: 18 mm A For horizontal polarization For vertical polarization B Material: Radiator: Weather-resistant aluminum. Radome: Fiberglass, colour: Grey. Mounting kit: Aluminum. All screws and nuts: Stainless steel. D: 14 mm D Antennas 47 862 MHz Mounting: To tubular masts of 48 115 mm diameter using supplied clamps. D Ice protection: Grounding: Since radiating system is fully protected by the radome and due to its very sturdy construction, the antenna remains fully operational even under heavy icy conditions. Via mounting parts. For horizontal polarization Combinations: Several antennas can be combined to increase the gain and to produce radiation patterns with very high side-lobe suppressions. Radiation Patterns (at mid-band) 5 65 For vertical polarization 1 1 In E-Plane In H-Plane 15

K 72 2 4.. Omnidirectional Antenna 47 86 MHz Broadband omnidirectional antenna. Type No. / Order No. 767 6 77 881 Number of bays 1 2 Input 7-16 female 7/8 EIA Frequency range 47 86 MHz VSWR < 1.1 Gain 5 8 at mid-band at mid-band Vertical beam width 22 11 5 Ω Horizontal Max. power 1 kw 2 kw (at 4 C ambient temperature) Weight 2 kg 4 kg Wind load (at 16 km/h) 285 N 57 N 225 km/h Height H 1.15 m 2. m H Material: Attachment: Grounding: Omnidirectional antenna in protective fiberglass radome with a diameter of mm. Flange: Aluminum. To tubular masts with a diameter of 1 16 mm by using the attachment accessories 768 85 (see photo) or on a flange (see draft). Via mounting parts. 4 x M12 15 max. 19 Upper side Base flange Radiation Patterns (at mid-band) 1 E rel 5 1 E rel 5 1 1 2 α 1 2 α Horizontal Radiation Pattern Vertical Radiation Pattern 1 bay (767 6) Vertical Radiation Pattern 2 bays (77 881) 16

K 72 2 4.. Omnidirectional Antenna 47 86 MHz Broadband omnidirectional antenna Type No. / Order No. 771 4 775 861 Number of bays 4 4 Input 1 5 /8 EIA flange 1 5 /8 EIA flange Input feed by Coupler Splitter Frequency range 47 86 MHz VSWR 1.1 in the whole frequency range < 1.5 in the operating channel (optimization by tuning) Gain (ref. to λ/dipole) 11 at mid-band Vertical beamwidth 5.5 5 Ω Horizontal Max. power 4 kw (average) (at 4 C ambient temperature) Weight 17 kg Windload (at 16 km/h) 1.45 kn 225 km/h Height 5.1 m Packing size 54 x 5 x 6 mm Material: Mounting: Omnidirectional antenna in protective fiberglass radome with a diameter of mm. On top of existing structure by means of an adapter. Mounting dimensions upon request. Antennas 47 862 MHz Grounding: Continuous earth connection between antenna tip and base. Special features: (only 775 861) Antenna is equipped with a special power splitter including tuning section to allow optimization of VSWR < 1.5 within operating channel. diameter 18 28 Radiation Patterns (at mid-band) 1 E rel 4 bays 5 1 Horizontal Radiation Pattern 1 2 α Vertical Radiation Pattern 17

K 7 2 4.. Omnidirectional Antenna 47 72 MHz Broadband omnidirectional antenna Type No. / Order No. 75 16 Input 7-16 female Frequency range 47 72 MHz VSWR < 1. (better VSWR values upon request) Gain (ref. λ/2 dipole). 4.5 Vertical beam width 2 5 Ω Vertical Max. power 75 W (at 4 C ambient temperature) Weight 16 kg Wind load (at 16 km/h) 225 N 225 km/h Height 14 mm ~14 2 245 Material: Omnidirectional antenna in protective fiberglass radome with a diameter of 2 mm. Flange: Hot-dip galvanized steel. Attachment: Onto a fitting counterflange or to tubular masts by using the steel adapter 75 127 (weight 9 kg, suitable for tube diameters 1 16 mm). Grounding: Via mounting parts. 2 7-16 female 55 5xM12 Radiation Patterns (at mid-band) Bottom view with attachment accessories 1 1 Horizontal Radiation Pattern Vertical Radiation Pattern 18

K 7 2 4.. Omnidirectional Antenna 47 72 MHz Broadband omnidirectional antenna Type No. / Order No. 75 162 Input 7-16 female Frequency range 47 72 MHz VSWR < 1. Gain (ref. λ/2 dipole) 5.5 7 Vertical beam width 11 22 5 Ω Vertical Max. power 1 kw (at 4 C ambient temperature) Weight 4 kg Wind load (at 16 km/h) 49 N 225 km/h Height 1927 mm 1927 Material: Omnidirectional antenna in protective fiberglass radome with a diameter of 2 mm. Flange: Hot-dip galvanized steel. 2 Attachment: Onto a fitting counterflange or to tubular masts by using the steel adapter 75 122 (weight 1.5 kg, suitable for tube diameters 1 16 mm). 56 Antennas 47 862 MHz Lightning protection: Lightning rod Grounding: Via mounting parts. 28 7-16 female 6xM12 Bottom view Radiation Patterns (at mid-band) 15 1 1 Horizontal Radiation Pattern Vertical Radiation Pattern 1 electrical downtilt 19

K 7 2 4.. Omnidirectional Antenna 47 75 MHz Center fed collinear antenna Vertical Polarized Omni Antenna for Ch 21 Ch 55 Type No. / Order No. Frequency Channel Gain Half-power range (ref. λ/2 dipole) beam width 75 1112 47 52 MHz Ch 21 Ch 24 6.5 1 75 111 52 54 MHz Ch 25 Ch 28 7 12 75 1114 54 574 MHz Ch 29 Ch 7.5 11 75 1115 574 614 MHz Ch 4 Ch 8 7.5 1 75 1116 614 662 MHz Ch 9 Ch 44 8 9.5 75 1117 654 72 MHz Ch 44 Ch 49 8 9 75 1118 694 75 MHz Ch 49 Ch 55 8.5 8.5 Input 7-16 female connector VSWR 1.4 5 Ω Vertical Max. power 4 W (at 5 C ambient temperature) Weight 8. kg Radome diameter 51 mm Wind load (at 15 km/h) 22 N 18 km/h Packing size 79 x 26 x 1522 mm Length 11 mm 11 mm Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey Antenna base: Aluminum. Mounting kit, screws and nuts: Stainless steel. Mounting: The antenna can be attached laterally at the tip of a tubular mast of 5 94 mm diameter (connecting cable runs outside the mast). Grounding: Earthing cross-section of 22 mm 2 copper between antenna tip and base. maximum mast top * 2 1 15 Vertical Pattern Half-power beam width: * see table above 14 11

K 7 4.. Directional Indoor Antenna 47 75 MHz Vertical Polarized Indoor Antenna for DVB-H Type No. / Order No. 75 112 75 1122 75 1124 75 1125 Frequency range 47 54 MHz 54 614 MHz 614 72 MHz 72 75 MHz Ch 21 Ch 28 Ch 29 Ch 8 Ch 9 Ch 49 Ch 5 Ch 55 Input N female connector VSWR < 2. Gain (ref. λ/2 dipole) Approx. 5 Half-power beam width Horizontal: Approx. 9 5 Ω Vertical Max. power 5 W (at 5 C ambient temperature) Protection class IP Weight 19 g Packing size 15 x 252 x 62 mm Height/width/depth 2 x 24 x 5 mm Material: Reflector: Brass. Radome: High impact polystyrol, colour: White. Additional painting is possible. Mounting plates: Stainless steel. Mounting: Two holes of 6 mm diameter in the mounting plate. Screws are not supplied 9 Antennas 47 862 MHz Grounding: All metal parts inclusive the inner conductor are DC grounded. 1 Horizontal Pattern Mounting: Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated. Align the antenna over the attachment plate. Pull the antenna down to the stop. 111

K 7 2 4.. Indoor Omnidirectional Antenna 47 75 MHz Vertical Polarized Indoor Antenna for DVB-H Type No. / Order No. 75 11 75 111 75 112 Frequency range 47 574 MHz 526 67 MHz 598 75 MHz Ch 21 Ch Ch 28 Ch 45 Ch 7 Ch 55 Input N female connector VSWR < 2. Gain (ref. λ/2-dipole) Approx. 5 Ω Vertical Max. power 5 W (at 5 C ambient temperature) Protection class IP Weight 45 g Packing size 267 x 267 x 114 mm Diameter 258 mm Height 77 mm (without connector) Material: Reflector: Aluminum. Radome: High impact polystyrol, colour: White. Additional painting is possible. Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 5 mm is required. Grounding: All metal parts including the inner conductor are DC grounded. 46 mm N connector, female holes dia. 5 mm 5 mm dia. 16 mm 112

K 7 21 4.. Bidirectional Antenna 47 72 MHz Particulary suitable for DVB-H Type No. / Order No. 75 1128 Input N female Frequency range 47 86 MHz VSWR 47 75 MHz: < 1.7 75 86 MHz: < 2.2 Gain (ref. λ/2 dipole) 2 5 Ω Vertical Max. power (total) 25 W (at 5 C ambient temperature) Protection class IP Weight.8 kg Wind load Frontal: 25 N (at 15 km/h) Lateral: 65 N (at 15 km/h) Rearside: 5 N (at 15 km/h) 2 km/h Packing size 422 x 212 x 95 mm Height/width/depth 1 / 55 / 19 mm 71 mm 4 mm Material: Mounting: Radiator: Tin plated brass. Reflector: Weather-proof aluminum. Radome: High impact plastic, colour: Grey. All screws and nuts: Stainless steel. Wall mounting: No additional mounting kit needed. For pipe mast mounting use clamps listed below (order separately). 8.5 mm Antennas 47 862 MHz Ice protection: The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions. Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded. Accessories (order separately) 22 Type No. Description Remarks Weight Units per approx. antenna 74 6 2 clamps Mast: 4 6 mm diameter 6 g 1 74 61 2 clamps Mast: 6 8 mm diameter 7 g 1 74 62 2 clamps Mast: 8 1 mm diameter 8 g 1 74 6 2 clamps Mast: 1 12 mm diameter 9 g 1 74 64 2 clamps Mast: 12 14 mm diameter 11 g 1 74 65 2 clamps Mast: 45 125 mm diameter 8 g 1 1 Typical Horizontal Pattern 11

114

Antenna Systems 1452 1492 MHz Systems 1452 1492 MHz 115

Transmitting Antenna with panels K 8 6.. 1452 1492 MHz Type No. / Order No. 759 1851 Input connector 7-16 female Frequency range 1452 1492 MHz VSWR < 1.2 Gain (ref. λ/2 dipole) 1.5 5 Ω Input power 8 W (RMS) Vertical Half-power beam width Vertical: 9 Height. mm (incl. lightning rod) Weight 125 kg Windload (at 16 km/h).8 kn 2 km/h Material: Reflector screen and radiators: Copper. Radomes: Fiberglass, colour: Grey. Panel pipe: Hot-dip galvanized steel. All screws and nuts: Stainless steel. Mounting: Panel pipe mounted with suitable clamps or additional flange on existing mast structures. A version supplied with fixing flange is available upon request. Grounding: The metal parts of the antenna are DC grounded. Also the inner conductors of the antenna panels are DC grounded. Packing infomation: Wooden crate: 2.7 x 8 x 9 mm Total weight: 4 kg 1 Horizontal Radiation Pattern 116

Transmitting Antenna with panels K 8 6.. 1452 1492 MHz Type No. / Order No. 759 122 Input connector 1 5/8 EIA-flange Frequency range 1452 1492 MHz VSWR < 1.2 Gain (ref. λ/2 dipole) 1 5 Ω Input power max. kw (RMS) Vertical Half-power beam width Vertical: 4.5 Downtilt on request Height 4.9 mm (excl. lightning rod) Weight 16 kg Windload (at 16 km/h).1 kn 2 km/h Material: Reflector screen and radiators: Copper. Radomes: Fiberglass, colour: Grey. Panel pipe: Hot-dip galvanized steel. All screws and nuts: Stainless steel. Mounting: Panel pipe mounted with suitable clamps or additional flange on existing mast structures. A version supplied with fixing flange is available upon request. Grounding: The metal parts of the antenna are DC grounded. Also the inner conductors of the antenna panels are DC grounded. Systems 1452 1492 MHz Packing infomation: 2 wooden crate: approx. 2.7 x 8 x 9 mm Total weight: 18 kg, each 1 Horizontal Radiation Pattern 117

Transmitting Antenna for large structures with panels K 8 6.. 1452 1492 MHz Type No. / Order No. 759 14152 Input connector 1 5/8 EIA-flange Frequency range 1452 1492 MHz VSWR < 1.2 Gain (ref. λ/2 dipole) 9.5 5 Ω Input power max. 2 kw (RMS) Mixed polarized (+45 and 45 ) Beam tilt or on request Distance of panels 1. mm Height 12 mm per unit Weight approx. 18 kg Windload (at 16 km/h) 1.1 kn 2 km/h 45 r +45 +45 45 Material: Reflector screen and radiators: Copper. Radomes: Fiberglass, colour: Grey. Panel pipe: Hot-dip galvanized steel. All screws and nuts: Stainless steel. Mounting: Panel pipe mounted with suitable clamps or additional flange on existing mast structures. A version supplied with fixing flange is available upon request. 1 Grounding: The metal parts of the antenna are DC grounded. Also the inner conductors of the antenna panels are DC grounded. Models: Models 75 194 (+45 ) and 75 1194 ( 45 ) L-Band Antenna Panel with 7 half-power beamwidth, electrical downtilt, max. power 5 W, height 12 mm Horizontal Radiation Pattern 118

Antennas for DAB in L Band 1452 1492 MHz Model Types: K 8 2 6.., K 8 6.. Type No. Description Frequency range Gain Page 77 72 Dipole Panel 65 1452 1492 MHz 8. vertical 12 77 7 Dipole Panel 65 1452 1492 MHz 1.5 vertical 12 77 79 Dipole Panel 65 1452 1492 MHz 1.5 vertical 12 77 794 Dipole Panel 65 1452 1492 MHz 15. vertical 12 77 795 Dipole Panel 65 1452 1492 MHz 16. vertical 12 77 652 Dipole Panel 9 1452 1492 MHz 12.5 vertical 121 77 947 Dipole Panel 9 1452 1492 MHz 15.5 vertical 122 77 948 Dipole Panel 16 1452 1492 MHz 14. vertical 12 77 65 Dipole Panel 16 1452 1492 MHz 11. vertical 124 772 1 Dipole Panel 18 1452 1492 MHz 1.5 vertical 125 771 917 Dipole Panel 18 1452 1492 MHz 1.5 vertical 126 75 119 Dipole Panel 7 1452 1492 MHz 14. +45 127 75 1191 Dipole Panel 7 1452 1492 MHz 14. 45 127 75 194 Dipole Panel 7 1452 1492 MHz 14. +45 128 75 1194 Dipole Panel 7 1452 1492 MHz 14. 45 128 77 721 Omnidirectional Antenna 1452 1492 MHz 7. vertical 129 77 722 Omnidirectional Antenna 1452 1492 MHz 1. vertical 129 771 87 Omnidirectional Antenna 1452 1492 MHz 11.5 vertical 129 771 8 Omnidirectional Antenna 1452 1492 MHz 1. vertical 1 Antennas 1452 1492 MHz 119

K 8 6.. Panel for DAB in L Band 65 Half-power Beam Width Type No. / Order No. 77 72 77 7 77 79 77 794 77 795 Connector position Bottom or top Input 7-16 female connector Frequency range 1452 1492 MHz VSWR < 1. < 1.25 < 1.25 < 1.25 < 1.25 Gain (ref. λ/2 dipole) 8 1.5 1.5 15 16 5 Ω Vertical Half-power beam width Horizontal plane 65 Vertical plane 55 27 1 9 6.5 Max. power 2 W (at 5 C ambient temperature) Width 155 mm Depth 49 mm Height 21 mm 45 mm 795 mm 1185 mm 1575 mm Weight 1.5 kg 2 kg kg 4.5 kg 5.5 kg Wind load (at 16 km/h) Frontal: 4 N 8 N 16 N 24 N 2 N Lateral: 15 N N 6 N 1 N 14 N Rearside: 45 N 9 N 18 N 28 N 8 N 2 km/h 155 Height see table Material: Reflector screen and radiator: Copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 8.5 4 64 Ice protection: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. 12 65 Grounding: The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. 1 Accessories for Antennas 77 72, 77 7, 77 79, 77 794 (order separately) Horizontal Pattern Type No. Order No. Description Remarks Units per antenna 74 6 2 clamps 4 6 mm diameter 1 74 61 2 clamps 6 8 mm diameter 1 74 62 2 clamps 8 1 mm diameter 1 74 6 2 clamps 1 12 mm diameter 1 74 64 2 clamps 12 14 mm diameter 1 74 65 2 clamps 45 125 mm diameter 1 1 * Accessories for Antenna 77 795 (order separately) 78 546 1 clamp 5 115 mm diameter 2 85 12 1 clamp 11 22 mm diameter 2 85 1 1 clamp 21 8 mm diameter 2 Vertical Half-power beam width: * see table above 12

K 8 6.. Panel for DAB in L Band 9 Half-power Beam Width 155 Type No. / Order No. 77 652 Connector position Bottom or top Input 7-16 female connector Frequency range 1452 1492 MHz Gain (ref. λ/2 dipole) 12.5 VSWR < 1.25 5 Ω Vertical Half-power beam width Horizontal: 9 / Vertical: 12 Max. power 5 W (at 5 C ambient temperature) Weight.7 kg Windload (at 16 km/h) Frontal: 2 N Lateral: 8 N Rearside: 2 N 2 km/h Packing size 187 x 172 x 259 mm Height/width/depth 988 / 155 / 49 mm 988 16 166 Material: Reflector screen and radiator: Copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 8.5 4 64 Ice protection: Grounding: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. 9 Antennas 1452 1492 MHz Horizontal Pattern Accessories (order separately) Type No. Order No. Description Remarks Units per antenna 12 74 6 2 clamps 4 6 mm diameter 1 74 61 2 clamps 6 8 mm diameter 1 74 62 2 clamps 8 1 mm diameter 1 74 6 2 clamps 1 12 mm diameter 1 74 64 2 clamps 12 14 mm diameter 1 74 65 2 clamps 45 125 mm diameter 1 1 Vertical Pattern 121

K 8 6.. Panel for DAB in L Band 9 Half-power Beam Width 155 Type No. / Order No. 77 947 Connector position Bottom Input 7-16 female connector Frequency range 1452 1492 MHz VSWR < 1.25 Gain (ref. λ/2 dipole) 15.5 5 Ω Vertical Half-power beam width Horizontal: 9 / Vertical: 5.5 1 electr. downtilt Max. power 5 W (at 5 C ambient temperature) Weight 6.9 kg Windload (at 16 km/h) Frontal: 4 N Lateral: 18 N Rearside: 48 N 2 km/h Packing size 244 x 172 x 72 mm Height/width/depth 1942 / 155 / 49 mm 1942 1996 226 Material: Reflector screen and radiator: Copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. 8.5 Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 4 64 Ice protection: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. 9 Grounding: The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. Accessories (order separately) Horizontal Pattern Type No. Order No. Description Remarks Units per antenna 78 546 1 clamp 5 115 mm diameter 2 85 12 1 clamp 11 22 mm diameter 2 85 1 1 clamp 21 8 mm diameter 2 1 5.5 Vertical Pattern 1 electrical downtilt 122

K 8 6.. Panel for DAB in L Band 16 Half-power Beam Width 155 Type No. / Order No. 77 948 Connector position Bottom Input 7-16 female connector Frequency range 1452 1492 MHz Gain (ref. λ/2 dipole) 14 VSWR < 1.25 5 Ω Vertical Half-power beam width Horizontal: 16 / Vertical: 5.5 1 electrical downtilt Max. power 5 W (at 5 C ambient temperature) Weight 7. kg Windload (at 16 km/h) Frontal: 44 N Lateral: 2 N Rearside: 48 N 2 km/h Packing size 247 x 172 x 259 mm Height/width/depth 1942 / 155 / max. 168 mm 1942 1996 226 Material: Reflector screen and radiator: Copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. 8.5 Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 4 64 Ice protection: Grounding: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. 16 1 22 Antennas 1452 1492 MHz Horizontal Pattern Accessories (order separately) Type No. Order No. Description Remarks Units per antenna 78 546 1 clamp 5 115 mm diameter 2 85 12 1 clamp 11 22 mm diameter 2 85 1 1 clamp 21 8 mm diameter 2 1 5.5 Vertical Pattern 1 electrical downtilt 12

K 8 6.. Panel for DAB in L Band 16 Half-power Beam Width 155 Type No. 77 65 Connector position Bottom or top Input 7-16 female connector Frequency range 1452 1492 MHz Gain (ref. λ/2 dipole) 11 VSWR < 1.25 5 Ω Vertical Half-power beam width Horizontal: 16 / Vertical: 12 Max. power 5 W (at 5 C ambient temperature) Weight 4 kg Windload (at 16 km/h) Frontal: 22 N Lateral: 1 N Rearside: 28 N 2 km/h Packing size 187 x 172 x 259 mm Height/width/depth 988 / 155 / max. 168 mm 988 16 166 Material: Reflector screen and radiator: Copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 8.5 4 64 Ice protection: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. 16 Grounding: The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. 22 1 Horizontal Pattern Accessories (order separately) Type No. Order No. Description Remarks Units per antenna 74 6 2 clamps 4 6 mm diameter 1 74 61 2 clamps 6 8 mm diameter 1 74 62 2 clamps 8 1 mm diameter 1 74 6 2 clamps 1 12 mm diameter 1 74 64 2 clamps 12 14 mm diameter 1 74 65 2 clamps 45 125 mm diameter 1 1 Vertical Pattern 12 124

K 8 6.. Panel for DAB in L Band 18 Half-power Beam Width 155 Type No. / Order No. 772 1 Connector position Bottom Input 7-16 female connector Frequency range 1452 1492 MHz Gain (ref. λ/2 dipole) 1.5 VSWR < 1.25 5 Ω Vertical Half-power beam width Horizontal: 18 / Vertical: 5.5 1 electrical downtilt Max. power 5 W (at 5 C ambient temperature) Weight 7. kg Windload (at 16 km/h) Frontal: 44 N Lateral: 2 N Rearside: 48 N 2 km/h Packing size 247 x 172 x 259 mm Height/width/depth 1942 / 155 / max. 168 mm 1942 1996 226 Material: Reflector screen and radiator: Copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. 8.5 Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 4 64 Ice protection: Grounding: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. 18 1 Antennas 1452 1492 MHz Horizontal Pattern Accessories (order separately) Type No. Order No. Description Remarks Units per antenna 78 546 1 clamp 5 115 mm diameter 2 85 12 1 clamp 11 22 mm diameter 2 85 1 1 clamp 21 8 mm diameter 2 1 5.5 Vertical Pattern 1 electrical downtilt 125

K 8 6.. Panel for DAB in L Band 18 Half-power Beam Width 155 Type No. / Order No. 771 917 Connector position Bottom or top Input 7-16 female connector Frequency range 1452 1492 MHz Gain (ref. λ/2 dipole) 1.5 VSWR < 1.25 5 Ω Vertical Half-power beam width Horizontal: 18 / Vertical: 12 Max. power 5 W (at 5 C ambient temperature) Weight 4 kg Windload (at 16 km/h) Frontal: 22 N Lateral: 1 N Rearside: 28 N 2 km/h Packing size 187 x 172 x 259 mm Height/width/depth 988 / 155 / max. 168 mm 988 16 166 Material: Reflector screen and radiator: Copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 8.5 4 64 Ice protection: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. 18 Grounding: The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. 1 Accessories (order separately) Horizontal Pattern Type No. Order No. Description Remarks Units per antenna 74 6 2 clamps 4 6 mm diameter 1 74 61 2 clamps 6 8 mm diameter 1 74 62 2 clamps 8 1 mm diameter 1 74 6 2 clamps 1 12 mm diameter 1 74 64 2 clamps 12 14 mm diameter 1 74 65 2 clamps 45 125 mm diameter 1 1 Vertical Pattern 12 126

K 8 1 6. Panel for DAB/DMB in L Band 7 Half-power Beam Width +45 or 45 75 119 Type No. / Order No. 75 119 75 1191 Connector position Bottom Input 7-16 female Frequency range 1452 1492 MHz VSWR < 1. Gain (ref. λ/2 dipole) 14 5 Ω +45 45 Half-power beam width Horizontal: 7 / Vertical: 8 Max. power 5 W (at 5 C ambient temperature) Weight 6.5 kg Wind load 1 N (bei 15 km/h) 2 km/h Packing size 144 x 172 x 92 mm Hight/width/depth 12 / 155 / 69 mm 12 156 186 Material: Reflector screen: Tin-plated copper, Radiator: Tin-plated zinc. Radome: Fiberglas, colour: Grey. All screws and nuts: Stainless steel. 8.5 5 Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 64 45 +45 69 Ice protection: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. 155 Bottom view Combinations: In combination with the other polarized antenna, both antennas are particularly suitable as a component in large distance multipanel configurations. No deep minima will show up in the overlapping zone between different dual polarized antennas. 1 7 Antennas 1452 1492 MHz Grounding: The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. Horizontal Pattern Accessories (order separately) Type No. Description Remarks Units per antenna 8 74 6 2 clamps 4 6 mm diameter 1 74 61 2 clamps 6 8 mm diameter 1 74 62 2 clamps 8 1 mm diameter 1 74 6 2 clamps 1 12 mm diameter 1 74 64 2 clamps 12 14 mm diameter 1 74 65 2 clamps 45 125 mm diameter 1 Vertical Pattern 127

K 8 1 6. Panel for DAB/DMB in L Band 7 Half-power Beam Width +45 or 45 electrical downtilt 75 194 Type No. / Order No. 75 194 75 1194 Connector position Bottom Input 7-16 female Frequency range 1452 1492 MHz VSWR < 1. Gain (ref. λ/2 dipole) 14 5 Ω +45 45 Half-power beam width Horizontal: 7 / Vertical: 8 electrical downtilt Max. power 5 W (at 5 C ambient temperature) Weight 6.5 kg Wind load 1 N (bei 15 km/h) 2 km/h Packing size 144 x 172 x 92 mm Hight/width/depth 12 / 155 / 69 mm 12 156 186 Material: Reflector screen: Tin-plated copper, Radiator: Tin-plated zinc. Radome: Fiberglas, colour: Grey. All screws and nuts: Stainless steel. 8.5 5 64 Mounting: Walls: Using two mounting plates already attached to the antenna. Masts: Using two clamps suitable for the mast diameter (order separately). 45 +45 155 69 Ice protection: Since the radiating system is protected by the radome and due to its very sturdy construction, the antenna remains operational even under icy conditions. Bottom view Combinations: In combination with the other polarized antenna, both antennas are particularly suitable as a component in large distance multipanel configurations. No deep minima will show up in the overlapping zone between different dual polarized antennas. 1 7 Grounding: The metal parts of the antenna, including the mounting kit, are DC grounded. The inner conductor is also DC grounded. Horizontal Pattern Accessories (order separately) Type No. Description Remarks Units per antenna 8 74 6 2 clamps 4 6 mm diameter 1 74 61 2 clamps 6 8 mm diameter 1 74 62 2 clamps 8 1 mm diameter 1 74 6 2 clamps 1 12 mm diameter 1 74 64 2 clamps 12 14 mm diameter 1 74 65 2 clamps 45 125 mm diameter 1 Vertical Pattern electrical downtilt 128

K 8 2 6.. Omnidirectional Antenna for DAB in L Band 1452 1492 MHz Center fed collinear antennas with 7, 1 and 11.5 gain. Omni 147 6 7/1/11.5 Type No. / Order No. 77 721 77 722 771 87 Input 7-16 female connector Frequency range 1452 1492 MHz VSWR < 1.25 Gain (ref. λ/2 dipole) 7 1 11.5 5 Ω Vertical Vertical half-power 1 6.5 4 beam width Max. power 2 W (at 5 C ambient temperature) Weight 4.5 kg 6. kg 8. kg Radome diameter 51 mm Wind load (at 16 km/h) 114 N 171 N 29 N 2 km/h Packing size 188 x 12 x 1246 mm 188 x 12 x 2216 mm 148 x 112 x 16 mm Length 97 mm 1944 mm 2994 mm 97 mm Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey Antenna base: Aluminum. Mounting kit, screws and nuts: Stainless steel. Mounting: The antenna can be attached laterally at the tip of a tubular mast of 5 94 mm diameter (connecting cable runs outside the mast). Grounding: Earthing cross-section of 22 mm 2 copper between antenna tip and base. 77 721 Antennas 1452 1492 MHz * maximum mast top 1 2 Vertical Pattern at mid-band. Half-power beam width: * see table above. 1 electrical downtilt 15 14 129

K 8 2 6.. Omnidirectional Antenna for DAB in L Band 1452 1492 MHz Center fed collinear antenna with 1 gain and downtilt. Type No. / Order No. 771 8 Input 7-16 female connector Frequency range 1452 1492 MHz VSWR < 1.25 Gain (bez. λ/2 dipole) 1 5 Ω Vertical Vertical half-power 6.5 beam width electr. downtilt Max. power 2 W (at 5 C ambient temperature) Weight 6. kg Radome diameter 51 mm Wind load (at 16 km/h) 171 N 2 km/h Packing size 188 x 12 x 2216 mm Length 1944 mm 1944 mm Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey Antenna base: Aluminum. Mounting kit, screws and nuts: Stainless steel. Mounting: The antenna can be attached laterally at the tip of a tubular mast of 5 94 mm diameter (connecting cable runs outside the mast). Grounding: Earthing cross-section of 22 mm 2 copper between antenna tip and base. 6,5 maximum mast top 1 2 Vertical Pattern at mid-band. Half-power beam width 6.5 electrical downtilt 15 14 1

MMDS (Wireless Cable) 25 27 MHz Wireless Cable (also known as MMDS) systems are used to distribute up to 1 channels of television programming throughout a city or urban area. KATHREIN offers a selection of 4 models of professional transmitting antennas for Wireless Cable services, with a choice of horizontal or vertical polarization, five different horizontal radiation patterns and gain options to meet your specific requirements. All antennas are composed of similar dipole modules housed in a robust GRP radome for weather protection. The use of parallel-fed elements assures constant vertical patterns across the full band and allows the use of beamtilt and null fill to optimize coverage. This new product line offers a number of advantages, including: VSWR is 1.2:1 (or better) across full 2 MHz bandwidth. 1.2 kw input power rating is standard for all models. Full selection of patterns & gain to optimize coverage. Parallel feed system provides maximum stability. Electrical beamtilt and null fill for coverage enhancement. Designed for severe environments. No pressurization is required. Superb performance and long-term reliability. Systems 25 27 MHz 11

MMDS (Wireless Cable) 25 27 MHz HORIZONTAL PATTERNS Omnidirectional Pattern Bidirectional Pattern MECHANICAL PROPERTIES VERTICAL PATTERNS 1 1 4 MODULES Weight: 27 kg Height: 174 mm Windload: 225 N 6 MODULES Weight: 5 kg Height: 2212 mm Windload: N 8 MODULES Weight: 4 kg Height: 288 mm RELATIVE FIELD RELATIVE FIELD RELATIVE FIELD 1..5 1..5 1..5 5 1 15 2 5 1 15 2 Gain: 12.4 i MMH-4/O (765 57) MMV-4/O (767 194) Gain: 14.1 i MMH-6/O (766 9) MMV-6/O (767 195) Gain: 15.2 i MMH-8/O (766 94) Gain: 16 i MMH-4/H (767 2) MMV-4/H (767 24) Gain: 17.7 i MMH-6/H (767 21) MMV-6/H (767 25) Gain: 18.8 i MMH-8/H (767 22) Windload: 4 N 5 1 15 2 MMV-8/O (767 196) MMV-8/H (767 26) Windload at 16 km/h 12

MMDS (Wireless Cable) 25 27 MHz 7 Pattern 15 Pattern 24 Pattern 1 1 1 Gain: 18.5 i Gain: 15.5 i Gain: 14.1 i MMH-4/C (766 44) MMH-4/B (766 4) MMH-4/A (766 96) MMV-4/C (767 26) MMV-4/B (767 22) MMV-4/A (767 198) Gain: 2.2 i Gain: 17.2 i Gain: 15.8 i MMH-6/C (766 45) MMH-6/B (766 41) MMH-6/A (766 97) MMV-6/C (767 27) MMV-6/B (767 2) MMV-6/A (767 199) Horizontal Gain: 21. i Gain: 18. i Gain: 16.9 i MMH-8/C (766 46) MMH-8/B (766 42) MMH-8/A (766 98) Vertical Systems 25 27 MHz MMV-8/C (767 28) MMV-8/B (767 24) MMV-8/A (767 2) 1

MMDS (Wireless Cable) 25 27 MHz Type No. / Order No. See Type No. on page 12 and 1 Connector Frequency range VSWR Vertical radiation patterns Max. power 7/8 EIA flange 25 27 MHz 1.2 : 1 maximum across the full 2 MHz bandwidth 5 Ω Choise of horizontal or vertical polarized models. 1 electrical downtilt and 15% null fill are standard. Other values available as options. 1.2 kw (at 5 C ambient temperature) 225 km/h ø 186 Material: Radome: Fiberglass, brown. Antenna base: Aluminum. Mounting: Flange mount to top of support structure. Directional models may be side-mounted using a bracket. Height Attention: The aluminum flange may only be mounted to a flat base-plate (max. uneveness.5 mm) with a drilled hole of 1 mm diameter in the center for the 7/8 EIA flange connector. Grounding: Via mounting parts. Label shows center of main beam 7/8 EIA flange 18 5 28 2 18 17 All dimensions in mm Mounting bracket 14

MMDS (Wireless Cable) 25 27 MHz 776 12 Type No. / Order No. 776 12 Connector Frequency range VSWR Vertical radiation patterns Max. power 2 x 7/8 EIA flange 25 27 MHz 1.2 : 1 maximum across the full 2 MHz bandwidth 5 Ω vertically polarized electrical downtilt 25% null fill on the first lobe and 15% on the second lobe 1.2 kw (at 5 C ambient temperature) 225 km/h ø 186 Material: Radome: Fiberglass, brown. Antenna base: Aluminum. Mounting: Flange mount to top of support structure. Directional models may be side-mounted using a bracket. 288 Attention: The aluminum flange may only be mounted to a flat base-plate (max. unevenness.5 mm) with a drilled hole of 18 mm diameter in the center for the two 7/8 EIA flange connectors. Grounding: Via mounting parts. Label shows center of main beam 9 18 Systems 25 27 MHz 2 x 7/8 EIA-flange 28 2 18 17 All dimensions in mm Mounting bracket 15

16

Relay Receiving Antennas and Special Antenna Systems Special Systems 17

Relay Receiving Antennas for TV and FM Broadcasting Receiving antenna systems with high side-lobe suppression and notches for the suppression of interference can significantly improve the signal quality of the relay receiving systems. Due to ever-increasing transmitter density, relay receiving systems can suffer difficulties due to co-channel or adjacent channel interference. In mountainous regions additional interference may be caused by reflected signals that arrive delayed. In order to suppress such interference, several individual antennas can be combined. Optimization of both the mechanical array and the electrical feeder system results in notches in the direction of the disturbance. Array patterns with notches in two different directions can also be produced to suppress interference coming from a variety of sources. To solve interference problems Kathrein offers receiving antennas with high side-lobe suppression for all frequency ranges. 16 1 Horizontal radiation pattern Half-power beam width: 16 Side-lobe suppression: > If high quality individual antennas are used, array patterns with particularly high side-lobe suppression can be produced. Kathrein s log.-per. antennas have been specially developed for such purposes. For example over the whole TV Band III range they achieve a side-lobe suppression value of more than 25 in both the horizontal and the vertical patterns. A further advantage of our log.-per. antennas is that their excellent radiation characteristics are hardly affected at all by very heavy ice formation. The following examples show measured radiation patterns of antenna arrays for all VHF and TV transmitting ranges (the side-lobes were enlarged by a factor of 1 to ease identification). Examples for Horizontal Radiation Patterns 47 88 MHz 87.5 18 MHz 174 2 MHz 47 86 MHz 1 expanded 1 expanded 1 expanded 1 expanded 1 1 1 1 units K 52 16 8.. 2 units K 52 22 1.. units K 52 22 5.. 4 units K 72 2 4.. 18

Special Antenna Systems Kathrein s sales range includes antennas and accessories for all frequency ranges from 47 MHz to 27 MHz transmitter power ratings from 1 W to 2 kw and various mast types (round, triangular, square or reinforced fibre-glass material). Furthermore, Kathrein will design and put together special constructions to solve all problems related to a specific site and to fulfil customers special requests. Typical examples: Antennas and power splitters with an extended frequency range. Antennas suitable for withstanding extreme weather conditions both on the coast and on the top of high mountains (see Säntis photo, Switzerland). Antennas with a heated surface to eliminate damage to people through falling ice. Multi-pattern systems for transmitting several channels with different horizontal patterns via one signal antenna system to make optimum use of the available mast height (see Marlow photo). Säntis transmitter in Switzerland VHF and TV antenna systems completely enclosed in a heated GRP radome. Special Systems Combiners and layout for Marlow transmitter in Germany. Multi-pattern antenna system for 7 FM channels. 19

14

Power Splitters Power Splitters 141

High Power Splitters 47 88 MHz, 87.5 18 MHz, 174 2 MHz, 47 862 MHz All power splitters are matched in the whole frequency range with VSWR < 1.5. The additional tuning unit can be used to optimize the input impedance of the antenna system on site. Special versions with unequal power splitting, alternative connectors or up to 16 outputs are available on request. Frequency 47... 88 87.5 18 174 2 47 862 range MHz MHz MHz MHz Length approx. 24 mm 17 mm 85 mm 7 mm with tuning unit approx. 26 mm 15 mm 1 mm Input power 1 2 kw 1 2 kw 1 15 kw 1 7 kw Connectors 7-16, 1-, 7/8, 1 5/8, 1/8, 4 1/2, 6 1/8 EIA flange (or other connectors upon request) 5 Ω VSWR < 1.5 in each frequency range Insertion loss <.5 Material: Outer conductor: Brass with protective grey paint. Inner conductor: Brass or aluminum. Mounting: Pressurization: On flat surfaces using the standard mounting equipment consisting of 2 bracket arms (supplied) or steel frame (order separately). The pressurization-tight transformer casing has an opening to balance out excess pressure. For pressurized operation (typically at mbar) this opening must be closed with the supplied sealing screw. IP 65 (closed ventiation tube for pressurized operation) IP 5 (opened ventilation tube for non-presserized operation) Example: Tunable 16-way splitter with different power splitting and with a measuring link. Weather protection: The RF connectors can be additionally protected with the sealing tape (please order separately). 11 mm 11 mm Example: 4-way splitter with standardattachment. 142

Medium Power Splitters 47 88 MHz, 87.5 18 MHz, 174 2 MHz, 47 862 MHz All power splitters are matched in the whole frequency range with VSWR < 1.5. The additional tuning unit can be used to optimize the input impedance of the antenna system on site. Special versions with unequal power splitting, alternative connectors or up to 12 outputs are available on request. Power splitters for 66 72 MHz, 76 82 MHz, 82 88 MHz are available on request. L 1 mm Frequency 47... 88 87.5 18 174 2 47 862 range MHz MHz MHz MHz Length approx. 24 mm 165 mm 845 mm 56 mm with tuning unit approx. 26 mm 15 mm 86 mm Input power kw 2.5 kw 2 kw 1 kw Connectors 7-16 female (other connectors upon request) 5 Ω VSWR < 1.5 Insertion loss <.5 Material: Outer conductor: Brass with protective grey paint. Inner conductor: Brass or aluminum. Mounting: On flat surfaces using the standard mounting equipment supplied (Bracket arm, 1 mm). To tubes of 4 mm diameter by means of 2 tension band clamps Type No. 759 44 (please order separately). 759 44 Pressurization: The pressurization-tight transformer casing has an opening to balance out excess pressure. For pressurized operation (typically at mbar) this opening must be closed with the supplied sealing screw. IP 65 (closed ventiation tube for pressurized operation) IP 5 (opened ventilation tube for non-presserized operation) Weather protection: The RF connectors can be additionally protected with the sealing tape (please order separately). Type No. ( Order No.) of available power splitters without tuning unit with tuning unit Number 47 54 54 61 6 68 87.5 18 174 2 47 862 174 2 47 862 of outputs MHz MHz MHz MHz MHz MHz MHz MHz 2 765 814 765 814 765 814 77 144 77 51 764 485 77 516 764 49 765 815 765 82 765 825 77 145 77 511 764 486 77 517 764 494 4 765 816 765 821 765 826 77 146 77 512 764 487 77 518 764 495 5 765 817 765 822 765 827 77 147 77 51 764 488 77 519 764 496 6 765 818 765 82 765 828 77 148 77 514 764 489 77 52 764 497 8 765 819 765 824 765 829 77 149 77 515 764 491 77 521 764 499 Power Splitters 14

Low Power Splitters 174 2 MHz, 47 862 MHz and 1452 1492 MHz 174 2 MHz Type No. / Order No. 768 4 768 4 768 44 768 5 768 45 768 6 Connector (female) N 7-16 N 7-16 N 7-16 Max. power 1 kw 2 kw 1 kw 2 kw 1 kw 2 kw (at 5 C ambient temp.) Number of outputs 2 4 Frequency range 174 2 MHz 5 Ω VSWR < 1.7 Insertion loss <.5 Max. size 8 / 82 / 82 mm 47 862 MHz Type No. / Order No. 768 4 768 1 768 41 768 2 768 42 768 Connector (female) N 7-16 N 7-16 N 7-16 Max. power 5 W 1 kw 5 W 1 kw 5 W 1 kw (at 5 C ambient temp.) Number of outputs 2 4 Frequency range 47 862 MHz 5 Ω VSWR < 1.7 Insertion loss <.5 Max. size 52 / 82 / 82 mm 1452 1492 MHz Type No. / Order No. 751 1281 751 1282 751 128 768 2 Number of outputs 2 4 Connector (female) 7-16 Max. power 7 W (at 5 C ambient temp.) Frequency range 1452 1492 MHz 5 Ω VSWR < 1.1 Insertion loss <.5 Max. size 16 / 82 / 82 mm Material: Case: Aluminum. Inner conductor: Brass. Mounting: Bracket included for wall mounting. May be attached to tubular masts using clamps listed below (order separately). Type No. Order No. Description Remarks 76 81 1 clamp Mast: 4 6 mm diameter 76 82 1 clamp Mast: 6 8 mm diameter 76 8 1 clamp Mast: 8 1 mm diameter 76 84 1 clamp Mast: 1 12 mm diameter 76 85 1 clamp Mast: 12 14 mm diameter 144

Low Power Splitter 87.5 18 MHz Low power splitters for connecting several antennas Typ No. / Order No. 751 1215 751 1216 751 1217 Compact broadband power splitter for low-loss connection of several antennas: For connecting... antennas 2 4 Input 7-16 female (equipment and antenna side) Frequency range 87.5 18 MHz VSWR > 1.7 5 Ω Max. power 4 W (at 5 C ambient temperature) Insertion loss <.15 Maximum cable diameter For equipment and antenna side: 7 / 8 Packing size Material: 2 x 17 x 115 mm Housing: Weather-resistant cast aluminum. Weather protection: UV-resistant weather-proof housing. Attachment: To tubular masts of 6 2 mm diameter using supplied non-corrosive clamp strap (12 x 2 x 1 mm). A: 14 mm B: 11 mm C: 8 mm D: 1mm Example 4-way antenna splitter Power Splitters Outputs Outputs Input 145

146

Components for Antenna Systems Filters and Combiners Measuring Links Patch Panels Coaxial Cables Dehydrators Mounting Hardware Transmitter Rohde & Schwarz Further accessories available for completing antenna systems: Probe Sections Mechanical Oscillation Dampers Obstruction Lights Patch Panel Spinner Combiner Network Kathrein Further Components 147

148

Filters and Combiners Kathrein offers a full range of filters and combiners to complete or extend FM and TV antenna systems. Combiner units of starpoint, stretchline and directional filter design and filters as well as any combinations thereof are available for all frequency ranges from 47 86 MHz and for any power levels from 1 Watt 1 kw. Special designs can be offered on request, e.g.: Filters for the reduction of spurious emissions, especially for DAB. Filters for the suppression of IM products. OIRT-CCIR multiplexers for combining signals in the OIRT (66 7 MHz) and the CCIR (87.5 18 MHz) frequency ranges. Multi pattern antenna systems consisting of a sophisticated arrangement of combiners, power splitters, feeder lines and antenna panels allowing the multiple use of the antenna aperture. A separate catalogue Filters and Combiners is available from Kathrein. FM combiner of multi-pattern antenna system Marlow. Further Components 149

Measuring Links Devices for non-mechanical opening of cables for measurement purposes Applications Measuring links are devices that are connected into RF cable runs. Thus it is possible to open the cable run in an electrical (non-mechanical) way, allowing to measure into the cable in both directions. When closed (in its operating condition), the measuring link is a completely homogeneous, uniform section of the transmission line and does not affect the cut-off frequency of the transmission line system. Measuring Heads To permit cable measurements to be performed, measuring heads are available to each size of measuring links: 1. A measuring head allowing measurements to be taken in one of both directions with the cable section not measured being short-circuited. Connectors: 7-16 or N female. 2. A measuring head with 2 test connectors allows to measure in both cable directions. Connectors: 7-16 or N female.. A measurement head for cases where the measuring link is used for providing an emergency cable connection. Measuring heads of this type can be used to couple out the full incoming RF energy. Design Features Measuring link in a cable run The measuring links are completely watertight and weatherproof. They are manufactured of red brass and are therefore resistant to corrosive environments of any nature. The measuring links are available in versions with cable connections from 6 1/8 to 1 5/8 EIA-flange or connectors 1- and 7-16. Technical details are available upon request. Typical Use of Measuring Links antenna main splitter Measuring link with 1/8 EIA-flanges normal operation measuring link switched through testing measuring link with measuring head feeder cable Tx power Measuring link with 1/8 EIA-flanges and 7-16 measuring head 15

Patch Panels Switching device for providing a spare connection between transmitter and antenna Applications If required, patch panels can be used to provide an instant replacement of non-operational transmission line connections between transmitters and antennas or half antennas. To meet different requirements, customerspecified patch panels are available with virtually any connector type and switching capability. Upon request, the switching points of the quick-release connectors can be equipped with safety contacts to avoid the connection of transmitters to unload switching points. Connections The connections for transmitter cables or rigid transmission lines to the antennas or transmitters are available with straight, or when equipped with angle flanges, with backwards, downwards or upwards orientation. Design Features Normally, a patch panel consists of a frontpanel made of aluminum that contains switching points and connectors with locking brackets. Each patch panel can be equipped with a duplex power splitter and with a simultaneous combining filter, if required. Typically, patch panels are intended to be installed into rack cabinets. Operation The connectors with quickrelease locking brackets have been proven in applications where spare connections must be established within just a few seconds. Typical Application (Example: Half Antenna Patch Panel) Normal Operation Half Antenna Operation upper half antenna power splitter lower half antenna U-Link or transmitter or combiner Further Components 151

Coaxial Cables and Accessories A wide variety of coaxial cables, connectors, cable clamps, earthing kits, hoisting sockets and other accessories are available for main and branch feeders. All components are of broadband type. The minimum size of coaxial components is determined by the power handling requirements and environmental conditions. Oversized coaxial cables are often used to reduce cable losses. Coaxial cables The power handling capacity and the attenuation vary greatly with the frequency. The cables are semi-flexible due to the use of corrugated copper tubes as outer conductors. The inner conductor is centered using a polyethylene helix or polyethylene foam. Air dielectric cables are available in following dimensions: /8 5/8 7/8 1 1/8 1 5/8 2 1/4 1/8 4 4 1/8 5 6 1/8 Air dielectric cables can be filled with dry air or nitrogen of.1. bar excess pressure. Foam dielectric cables are available in following dimensions: /8 1/2 5/8 7/8 1 1/4 1 5/8 Special versions: Cables with fire retardent jacket or super-flexible types for narrow bends or improved power handling capacity are available on request. Connectors Coaxial connectors for semi-flexible cables or rigid lines and adaptors are available in following sizes: N 7-16 1-7/8 EIA 1 5/8 EIA 1/8 EIA 4 1/2 EIA 6 1/8 EIA 152

Coaxial Cables Typical Installation Approach Further Components 15

Dehydrators 19 rack version Wall-mounted version Equipment for maintaining continous air pressure within RF transmission lines and antenna systems Cable connector Typical ventilating system Feeder cable Plastic air hose Hose connection Applications Transmitting and receiving antenna systems whose RF transmission lines such as coaxial cables and power splitter assemblies are filled with dehydrated air operate with increased reliability. Operation It is recommended to use dehydrators with fully automatic regeneration of the desiccant that allow to continously maintain and monitor the air pressure within RF transmission and antenna systems. Design features Maintenance-free dehydrators for virtually any application are available in different versions such as wall-mounted units or rack-mount units for installation into standardized racks with various levels of compressor power and pressure categories. Technical details are available upon request. 154

Mounting hardware for UHF panels Components for mounting UHF panels to pipe masts. Material: Hot-dip galvanized steel. Stainless steel bolts and nuts are supplied. Pair of clamps for one UHF panel Type No. Order No. Suitable for pipe Weight masts of mm kg K 61 14 1 6 481 4 95 1.6 K 61 14 2 6 482 6 115 1.6 K 61 14 6 48 115 21 4. K 61 14 4 6 484 21 8 7.2 K 61 14 5 6 821 8 521 1.2 Pair of clamps K 61 14 Tilt brackets (pair) Type No. K 61 1 Order No. 6 54 For beam tilt down to 1 Slant compensation kit Type No. K 61 2 Order No. 6 55 Pair of plates for compensating the slant (15 mm per m) on tapered masts Further Components 155

Mounting hardware for UHF panels Components for mounting UHF panels to pipe masts. Material: Hot-dip galvanized steel. Stainless steel bolts and nuts are supplied. Remark: The radius from the center of the array to the reference point of the panel is given by the distance A. Pair of clamps for two UHF panels Type No. Order No. Suitable for Weight Distance Angle α between pipe masts of kg A/mm directions of the mm two UHF panels K 61 15 11 6 869 7 15 6.4 K 61 15 12 6 87 15 8.8 8 8 K 61 15 1 6 871 4 8.8 K 61 15 21 6 84 7 15 6.4 K 61 15 22 6 844 15 8.8 266 9 K 61 15 2 6 845 4 8.8 Pair of clamps for three UHF panels Type No. Order No. Suitable for Weight Distance Angle α between pipe masts of kg A/mm directions of the mm three UHF panels K 61 15 1 6 846 7 15 8.4 K 61 15 2 6 847 15 9.2 8 8 K 61 15 6 848 4 9.2 K 61 15 41 6 849 7 15 8.4 K 61 15 42 6 85 15 9.2 266 9 K 61 15 4 6 851 4 9.2 Pair of clamps for four UHF panels Type No. Order No. Suitable for Weight Distance Angle α between pipe masts of kg A/mm directions of the mm four UHF panels K 61 15 52 6 875 15 27 8 8 K 61 15 61 6 991 7 15 26 258 9 K 61 15 62 6 874 15 26 26 258 9 Special features: A part of the mount can be swivelled out for easier mast climbing. 156

Mounting hardware for L Band panels Components for mounting L Band panels to pipe masts. Material: Stainless steel. Bolts and nuts are supplied. Pair of clamps for one L Band panel Type No. / Suitable for Weight Order No. pipe masts of g mm approx. 74 6 4 6 6 74 61 6 8 7 74 62 8 1 8 74 6 1 12 9 74 64 12 14 11 74 65 45 125 8 Screws supplied 8 6 4 2 1 Downtilt kit Type No. / Order No. 72 27 (additional clamps are required for mounting, see table) Slant compensation kit Type No. / Order No. 72 19 is used for compensating conical masts (additional clamps are required for mounting, see table) 77 mm 55 mm Weight: 2 g Further Components 157

Mast clamps Components for mounting antennas or splitters to pipe masts. Stainless steel bolts and nuts are supplied. A Type No. Order No. Suitable for pipe Weight Dimenmasts of mm kg sions mm K 61 12 6 479 6 115.4 A: 14 (pair of B: 25 clamps) C: 15 B 17.5 mm C Mast clamps for panels K 52 5. and K 52 4 5.. A Type No. Order No. Suitable for pipe Weight Dimenmasts of mm kg sions mm K 61 1 6 48 115 21 4.5 A: 24 (pair of B: 25 clamps) C: 18 B 17.5 mm C Mast clamps for panels K 52 5. and K 52 4 5.. B Type No. Order No. Suitable for pipe Weight Dimenmasts of mm kg sions mm K 61 16 1 61 647 77 5.8 (without suitable for panels picture) K 52 5. K 61 16 2 62 52 6 125 5.6 A: 5 B: 125 A Mast clamps for panels K 52 5. Type No. / Suitable for pipe Weight Dimen- Order No. masts of mm kg sions mm 759 44 4.65 Tension band for mounting of the medium power splitters to pipe masts 158

Technical Annex 1 159 Technical Annex

Antenna System Configurations Kathrein offers a wide variety of antenna systems, allowing the broadcaster to select the optimum configuration for each station. Following is an overview of various arrays and their typical characteristics and advantages. Three-sided Panel Array Equal power splitting Different power splitting /7 P The individual panels are designed to cover an azimuth sector of 12 degrees and three panels fed with equal power will result in an omni-directional pattern. Directional horizontal radiation patterns can be achieved by using a different panel arrangement and/or feeding the panels with unequal power levels. This arrangement is especially suitable for triangular and round towers or masts. These broadband systems are available with horizontal or circular polarization. Panel arrangement Horizontal radiation pattern (at mid-band) 1 1/7 P 1 /7 P Four-sided Panel Array Equal power splitting Different power splitting 4/1 P The individual panels are designed to cover an azimuth sector of 9 degrees so that four panels fed with equal power will produce an omni-directional pattern. Again, directional horizontal radiation pattern can be produced with other panel arrangements and unequal power fed to various panels in the array. This configuration is especially suitable for square towers or masts. These broadband systems can be supplied for any polarization. Panel arrangement Horizontal radiation pattern (at mid-band) 1 1/1 P 1/1 P 1 4/1 P Turnstile Antenna ϑ Turnstile and Superturnstile-Antennas U ~ This type of antenna (also known as a batwing ) produces an excellent horizontally polarized omni-directional pattern. A metal mast can be placed in the center of a turnstile-antenna as long as the mast has a small diameter relative to the wavelength of the signal..7 λ ~ ~ 9 ju ϑ Superturnstile Antenna 16.25 λ.5 λ

Antenna System Configurations Multi-panel Array If the cross section of the mast or tower is more than one wavelength it is impossible to obtain a satisfactory omni-directional horizontal radiation pattern using three or four panels per bay. However, an omni pattern can be achieved by increasing the number of panels per bay. The horizontal patterns of these multi-panel arrays will vary with frequency, but they can be designed for excellent omni performance over limited bandwidths. Multi-panel arrays are available with horizontal or vertical polarization. Special Antenna Systems Inside Self-supporting GRP Towers A large-diameter GRP (Glass Reinforced Plastic) pipe can be utilized to substitute a metal support structure and enclose an antenna system. The GRP pipe is transparent to RF energy and it allows the antenna engineer to use an optimized antenna design with a small cross-section at the center of the pipe. Antenna elements may be dipoles or turnstiles. The GRP pipe also provides excellent protection against severe environmental conditions such as rain, ice, snow, wind and corrosive agents and it allows access for inspections and maintenance at any time. Horizontally and vertically polarized systems can be supplied. Examples for Radiation Patterns 47 88 MHz 87.5 18 MHz Relay Receiving Antennas For professional receive applications such as transposer/translator inputs Kathrein offer a full range of antennas including yagis and logarithmic-periodic types. UHF models are equipped with radomes to assure reliable operation in icing conditions and to protect the antennas against weather damage. 1 1 expanded units K 52 16 8.. 174 2 MHz 1 1 expanded 2 units K 52 22 1.. 47 86 MHz Arrays of these antennas are available to provide very high gain, extremely narrow main lobes, and high rejection of co-channel and other interfering signals coming into the rear and sides of the array. Receiving antennas and arrays are available with either horizontal or vertical polarization. 1 1 expanded 1 expanded units K 52 22 5.. 4 units K 72 2 4.. 1 161 Technical Annex

Glossary of Broadcast Antenna Terms Antenna Gain The gain of an array describes the increase of signal in the main radiation direction which is produced by reducing radiation in all other directions and concentrating it in the main beam. The gain of a broadcast antenna system is normally increased by using a larger number of vertical bays (increasing the vertical aperture) and thereby forming a more narrow vertical radiation pattern. In the case of a directional antenna system the gain is increased by reducing or eliminating radiation toward azimuth segments and redirecting it toward the areas where coverage is desired. When calculating the gain of an array the losses in the feeder cables and the power splitters must be taken into account. Downtilt in Panel Arrays When transmitting antennas are located on elevated sites it is often beneficial to tilt the main beam of the vertical radiation pattern downward to provide higher signal levels in the areas to be served. There are two ways to accomplish downtilt (also known as beam tilt ). The panels can be mechanically tilted to direct the beam downward, or phase differences can be introduced into the array feeder system to achieve electrical tilt. Tuning While the VSWR of a well-designed antenna system can be optimized by the use of tuning devices it is not possible to achieve broad bandwidth by compensating for poor components with tuners. The characteristics of a truly high quality antenna system are established in many ways, beginning with proper component design and manufacture followed by competent system design and installation. Mast or Tower Dimensions for Panel Arrays The radiation pattern of a panel array depends on the relative positions of the individual panels in space and the relative amplitude and phase of the RF energy fed to each panel. Therefore it is necessary to have exact dimensional information about the supporting tower or mast if one is to optimize an array design. 162 The cross section of the mast or tower should be less than one wavelength for a good omni pattern. As the cross section increases beyond one wavelength nulls in the horizontal radiation pattern will rapidly become deeper. Measurement Links When large-diameter coax lines are used in an antenna system it is not possible to easily connect measurement equipment without disassembly of the coax system. In these cases it is advisable to install measurement links in the coax feeders to allow convenient connection of test equipment to the antenna system. Mismatch Compensation In a broadcast panel array the impedance match of individual panels can be disturbed by mutual coupling, icing and the presence of nearby obstacles. For this reason it is necessary to design the feed system so as to cancel reflections within the array and thereby minimize the presence of reflected signal at the antenna system input. This technique is also known as impedance compensation. Null Fill Panel arrays with multiple vertical bays will exhibit deep nulls in the vertical radiation pattern if all bays are fed with equal phase and amplitude. It is important to fill these nulls for proper signal coverage. For TV systems it is not sufficient to provide the minimum signal level, but it is necessary to make the direct signal bigger than any reflexion to avoid ghost pictures. There are three methods of introducing null fill in a panel array: Mechanically tilting some panels downward Using a non-linear phase taper between bays Using an unequal power split between bays Since some energy is taken from the main beam to fill the null, the maximum gain of the antenna system will be reduced, typically.5 to 1.5, when null fill is introduced.

Glossary of Broadcast Antenna Terms The polarization is defined as the direction of the electrical vector, in practice the plane of the dipoles. The electric field of an antenna system can be split into a horizontal and a vertical component. If there is only one component, the polarization is pure horizontal or vertical (plane polarized). If there are two components which are not in phase, the polarization is elliptical. For slant polarization both must exist and they must be in phase. When an antenna produces vertically and horizontally polarized fields with equal amplitude and with a phase difference of exactly 9 degrees, the resulting signal is circularly polarized. Power Rating of Components Generally, the power rating of components refers to the maximum CW power (or mean power) level that can be applied to the input. The maximum mean power output of a TV transmitter occurs during transmission of a black picture and it is typically equal to 7 % of the peak sync power level. Split Antenna Systems An antenna system can usually be divided into upper and lower halves which can be operated separately. This arrangement allows the use of one half for broadcast operations while the other half is available for painting or maintenance or other work that must be performed in close proximity to the antenna. The signal level will be reduced by 6 if one half of the antenna is fed with one half of the normal transmitter power. If the full transmitter power is available, the use of one half of the antenna will reduce the signal level by only. It will be necessary to climb the mast or tower to perform antenna switching unless a coax patch panel is installed at the transmitter output with two main feeders up to the antenna inputs. 16 Technical Annex

164

The following information is required to design an optimum antenna system for you: customer address phone FAX station name: location: frequency (MHz) or channels transmitter power (kw) min. power rating for system (kw): analog digital antenna gain or ERP or number of bays: polarization: horizontal or vertical or slant horizontal radiation pattern omni or directional (if directional specificy requirements) vertical radiation pattern beam tilt: null fill: tower square or triangular or round side length or diameter: azimuth direction of tower face: vertical antenna aperture: feeder air or foam half antenna no mode size half power connectors length dehydrator full power 1 feeder 2 feeders patch panel combiner measurement link special climatic conditions Please contact KATHREIN-Werke KG G. Klauser Telephone +49 81 184-958 Fax +49 81 184-495 Anton-Kathrein-Str. 1 P.O. Box 1 4 44 D-84 Rosenheim Germany e-mail: broadcast@kathrein.de Technical Annex

9981.51/67//ZW/PF Subject to alteration. Internet: http://www.kathrein.de KATHREIN-Werke KG. Telephone +49 81 184-. Fax +49 81 184-495 Anton-Kathrein-Straße 1. P.O. Box 1 4 44. D-84 Rosenheim. Germany