BOWSTONE DIVING PRODUCTS

Similar documents
Coaching. Bags. Pro Kit Bag Made from heavy duty lined denier for extra durability. Vast

Plate carrier, Strap-on DF -13 MANUAL

Bespoke, Own Label Lifejackets

MICHAEL CHANDLER FORMER BELLATOR LIGHTWEIGHT CHAMPION

Skirt 1 / 4. The Skirt. The skirt patterns were downloaded from Mark's site but they need expanding before they can be used.

Kids Woven - Minimum Construction Standards

All seam allowances are 1/2 unless otherwise noted. All pattern pieces include the seam allowance. Please read all instructions before beginning.

S.M.S.50 Harness User Guide (Doc. No )

TABLE OF CONTENTS INTERIOR BANNER DISPLAYS 2-4 LIGHT BOX DISPLAYS 5 EXTERIOR SIGN DISPLAYS 6 HARDWARE 7-9

Ariva Powerful Marketing Displays. Exhibit & Display Solutions

Designed in Italy by EN 14-1

WARNING! WARNING! ALWAYS WEAR A TMA APPROVED FALL ARREST SYSTEM WHEN USING ANY TREESTAND

Exhibitor Expanding. Shed some light on your display!

DIY Advanced Dry Bags

Cosmetics Case with Vinyl Interior Skill Level: Intermediate

Osprey Mk 4 Body Armour

Patient Slings. Owner s Operator and Maintenance Manual. DEALER: This manual must be given to the user of the product.

EMS WHOLESALE WAREHOUSE BASIC MEDICAL SUPPLY

GENUINE PARTS INSTALLATION INSTRUCTIONS

contents classic 3 switch 4 mini swing 5 sign wedge 6 chalkboards 7 all purpose A frames 8 H2O swingmaster 9 café banner 10 vision 11

Back(pack) to School Bag Skill Level: Intermediate

INSTRUCTIONS FOR CHAIN LINK INSTALLATION Chain Link fence & Posts Meshdirect.co.uk

Range Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual

PRODUCT MANUAL. Dog Tag Keyring = R including engraving, excluding postage

Modular Locomotive System Instruction Manual for HBK8 George Body Kit

How To Work With Beads. By Rowan

Roll Up Banners. Display Banners. Pop-Up Counter. Display Wall. Flags. Free Hanging Banners

Coyote popup features

FLAME RESISTANT (FR) NFPA 70E NESC OSHA ASTM F1506. CSA Z462 (Canada) Secondary Protection from Electric Flash fire hazards

Coyote popup features

ERGONOMIC PRODUCTS HAND PROTECTION IMPACT/ANTI-VIBRATION HOW DOES IT WORK? LEATHER:

Rehabilitation Aids Sling Range

THE TRIMLINE 10' x 20' CANOPY

BICYCLE PUMP AIR PRESSURE ROCKETS Credit: Jeff Elmer, Physics Teacher, Oshkosh North High School

Here are trade show displays I'm sure will meet your goals. I can also find items priced within your expected budget.

Solstice/Sky Water Pump Replacement

Coyote popup features

MGB Chrome Bumper Conversion

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V

Caboose Too Rear Seat Instruction Manual 0090X & 0091X Series

BADGE HOLDERS & CARD DISPENSERS

KNIT MITTENS PATTERN CHART (for Kids and Teens) Knit on 2 needles with the thumbs on the sides (Provided to Knitting4Peace by Carrie Epps)

POP Pushchair. Instructions

Caring for Your PleurX Pleural Catheter

DUI Drysuit Repair and Maintenance

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION

Traditional Sonar and DSI Sonar Installation

Precision Vise Combinations

Banner Stands & Displays

ERECTION INSTRUCTIONS FOR CAMPUS SEATTLE

Products Made in the USA from Upcycled, Recycled and Repurposed Materials Catalog

VOYAGER 570G. 744A Sprayer Control

TRUCK CURTAIN SPARE PARTS CATALOGUE

Please refer to the pack Design Tutorial for direction on how to embroider the blocks and sew them together.

Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks

Just-Like-Mine! Doll or Stuffed Toy. Car Seat. Instruction Manual. These instructions are for the following Joovy Style # s: 002, 003

majestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base

Table of Contents PRODUCTS. DYE SUB POP UP CANOPIES P. 3-4 Dye Sublimated Canopy... Attract Customers, Increase Brand Awareness & Say it in Color!

Hard Hats. Head Protection 2013 CATALOG

Sliding and Folding Door Fittings Sliding Door Accessories

Fall Protection Susan Harwood Grant Training Program 2013 Fall Arrest. OSHA Susan Harwood Training - AGC

How to Build Your Own CornHole Game

How To : Sweater Coat

Determining Your Helmet Size

redcherry Contents PAGE INDOOR CATALOGUE (t) +27 (0) (e) (w)

Instructions for Using the Watch Works Tool Kit to Change a Watch Battery

WiMo Antennen und Elektronik GmbH Am Gäxwald 14, D Herxheim Tel. (07276) FAX

EXHIBITIONS & DISPLAYS

Outdoor Clothing Buying guide

Time to pack your bags!

CAR SEAT/ STROLLER INSTRUCTION MANUAL

IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL

HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL

Ipswich Packaging Services

16 Stitches Style Guide

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions

FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT

Embroidery Placement Charts

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS

CONTENTS PRODUCTS SET-UP 3D DRAWING TEMPLATES SOLUTIONS PANEL SYSTEM 2... HARD CASE & BAGS

KELGATE BRAKES - price list for 2014 Page 1

the right stuff Guide to protective riding gear

Internal Strap Assemblies (Box Vehicles)

PRODUCT GUIDANCE FABRIC STANDS

Installation and Dismantle Instructions for Your Exhibit Please Read DO NOT DISCARD - REPACK AND RETURN WITH EXHIBIT

Pricing effective from January 2015

FRONT BUMPER INSTALLATION INSTRUCTIONS DODGE / MERCEDES SPRINTER

(1) For Basic Course (MS I-II) the ROTC insignia will be centered on the left curtain 1 inch from the crease.

Please read this manual before flying with BIX for the first time.

Convertible Top Hydraulic Cylinder Removal Manual for W124 E-Class Convertibles Models 300CE (1993) and E320 ( )

A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS

CataLoG No. weight o.d. i.d. GLaSSwaRe

Texas Rowing Center Apparel

RESERVDELSLISTA NORMFINISH DP14

Choosing the Right Floor Protectors

Electrical Safety Products

BEDFORD DORMOBILE PARTS LIST JUNE 2016

ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN

PACKAGING PRODUCT CATALOG

Transcription:

BOWSTONE DIVING PRODUCTS PROBABLY THE ONLY DIVING EQUIPMENT MADE IN THE U.K. RETAIL PRICE LIST [COUNTER COPY] BOWSTONE DIVING PRODUCTS, FOLDS END FARM, FERNILEE, WHALEY BRIDGE, HIGH PEAK, SK23 7HB Tel/Fax +44 (0)1663 735361

The Home of Bowstone Diving Here in the heart of the Peak District National Park, Bowstone Diving produces its vast range of home grown products. A careful selection of quality ingredients, hand crafted through various processes and assembled to give you a unique range of diving equipment that is well known and respected in the diving community. As well as specialising in a full made to measure service on pouches and undersuits, we also Should you have any special requirements, please do not hesitate to contact me. Many thanks for your time and interest, Simon A. Rodger 2

CONTENTS PAGE 4-5 PAGE 6-8 PAGE 9 PAGE 10 PAGE 11-12 PAGE 13 PAGE 14-15 PAGE 16 19 WEIGHT SYSTEMS BAGS & POUCHES MARKER BUOY & LIFT BAGS NEOPRENE ACCESSORIES UNDERSUITS FLAGS BOTTLE ACCESSORIES ACCESSORIES 3

Soft Shot Belt. - 7603 A pocketed weight belt designed to carry lead blocks or bags of shot. Each pocket can carry up to 3 Kilos. Velcro type fastened flap. Size: Small 4 pockets, Medium 5 pockets, Large 6 pockets, X-Large 7 pockets. Assorted colours. S.R.P. 24.00 Buckle & Belt - 7620 A 50mm stainless steel buckle and Bowstone logo. 1.5m of heavy duty 50mm polypropylene webbing. Colours: Black/Blue/Red/Yellow S.R.P. 9.00 Pocketed Shot Belt - 7670 A pocketed loose shot belt with horizontal stitching. Central Velcro filling point. 2 extra weight pockets. Size: Small 12k + 4k, Medium 14k + 4k, Large 15k + 4k, X- Large 16k + 4k. S.R.P. 35.00 WEIGHT SYSTEMS Ankle Weight (0.6k x 2) - 7610 An ingot type ankle weight, 6 pieces per ankle. 25mm slide release buckle for easy fastening. Assorted Colours S.R.P. 17.50 Ankle Weight (1k x 2) - 7611 An ingot type ankle weight, 6 pieces per ankle. 25mm slide release buckle for easy fastening. Assorted Colours S.R.P. 20.00 Centre Latch Buckle & Belt - 7660 A 50mm stainless steel centre latch buckle and 1.5m of heavy duty 50mm polypropylene webbing S.R.P. 12.00 Pocketed Shot Belt - 7671 A pocketed loose shot belt with vertical stitching. Central Velcro filling point. 2 extra weight pockets. Size: Small 12k + 4k, Medium 14k + 4k, Large 15k + 4k, X-Large 16k + 4k. S.R.P. 35.00 Shot Belt - 7680 A loose shot belt with horizontal stitching. Size: Small 12, Medium 14, Large 15, X-Large 16. S.R.P. 27.00 Shot Belt - 7681 A loose shot belt with vertical stitching. Size: Small 12, Medium 14, Large 15, X-Large 16. S.R.P. 27.00 6 Pocketed Harness Belt - 7690 A fully adjustable harness belt with 6 pockets, to carry 3k of bagged shot or lead blocks per pocket. 1 size fits all. Note: No positive release on this belt. Colour: Black S.R.P. 76.00 4

Quick Release Harness Belt - 7691 A fully adjustable harness belt with 2 slide pockets to hold 9k of bagged shot or lead blocks per side. A positive release system using Velcro flaps and stainless steel studs. 1 size fits all. Colours: Black/Blue/Red/Yellow S.R.P. 80.00 WEIGHT SYSTEMS (CONTINUED) 4 Pocket Belt - 7692 A four pocketed fully adjustable belt. Each pocket will carry 3k of bagged shot or lead blocks. The construction of the pockets makes this a very comfortable belt to wear, especially for the girls. 1 size fits all. Colours: Black/Blue/Red/Yellow. S.R.P. 35.00 Shot Pocket (3k) - 7693 Made from heavy duty plastisized nylon mesh. Slides onto 50mm webbing and holds up to 3k of shot. Velcro fastening to stop shot coming out. Size: 17cm x 12cm x 4.5cm. S.R.P. 12.50 Weight Pocket - 7695 Will hold up to 3k bagged shot or lead block. Slides onto 50mm webbing. Velcro fastening. Size: 17cm x 12cm x 4.5cm. S.R.P. 12.50 Stainless Steel Buckle - 8000 A 50mm stainless steel buckle with Bowstone logo. S.R.P. 6.00 Roll Of Webbing - 8022 50mm of heavy duty polypropylene webbing. 50m rolls. Colours: Black/Blue/Red/Yellow. S.R.P. 75.00 3 bar slide - 8225 A 50mm stainless steel 3 bar slide. S.R.P. 1.75 Tech Belt - 7689 A 4-pocket belt with harness and tech pouch that fits to front. S.R.P. 100.00 Shot Bag (2k) - 7694 Made from heavy duty plastisized nylon mesh. Holds up to 2k of shot. Velcro fastening. Size: 15cm x 11cm. S.R.P. 4.00 Spare Pocket - 7696 A Spare pocket for the 7691/Quick Release Harness Belt. S.R.P. 14.00 Toothed Slide - 8010 A heavy-duty 50mm plastic toothed 3 bar slide. Assorted Colours. Packs of 10. S.R.P. 5.00 50mm Link - 8125 A 50mm stainless steel link. S.R.P. 1.00 D Ring - 8290 A 50mm stainless steel D Ring. S.R.P. 2.00 Quick Release Pockets - 7768 A pair of weight pockets, that can thread onto the waist straps of the harness, and are held in place by a 3 bar slide sewn on the reverse. A positive release system of Velcro flaps and a stainless steel stud make release of weights simple when required. S.R.P. 65.00 8 Kilo Shot Bag for 7691-7697 This shot bag will carry 8 kilos and is designed to fit to the curve of the hip. S.R.P. 15.00 5

BAGS & POUCHES Goody Bag - 7500 A large sized Goody bag (70cms x 42cms approx.), manufactured from our unique yellow polypropylene netting, with an eyeleted and drawstring top. S.R.P. 9.00 Extra Large Goody Bag - 7501 An extra large Goody Bag (80cms x 42cms approx.), manufactured from our unique yellow polypropylene netting, with an eyeleted and drawstring top S.R.P. 10.00 Slate Slip 7506 2/3 A 2 or 3 pocketed, arm mounted slate holder. The diver can carry, and easily view more than one table or run time. Elasticised straps and Velcro fastening on pockets. Inside pocket size 10cms x 14cms. Trade 6.50 S.R.P. 18.00 S.R.P. 20.00 Goody Bag Pouch - 7511 A simple pouch that will slide onto 50mm webbing, designed to carry a Bowstone goody bag. Velcro fastening on flap. Size: 19cm x 7.5cm x 8.5cm S.R.P. 10.00 Accessories Pouch - 7513 This spacious pouch will slide onto 50mm webbing and has a large Velcro flap. Size 22cm x 23cm x 8cm S.R.P. 18.00 Utility Pouch - 7515 A 2 pocket zipped pouch that can thread onto 50mm webbing or fit over an elasticised cumber-band on a B.C. Size: 23cm x 15cm x 5cm Leg Pouch - 7530 With a snap bolt at the top of this pouch, it can be easily attached to a D ring, and the strap at the base fastened around the leg. A Velcro flap and 2 drain holes complete this very popular pouch. Size: 30cms x 18cms x 6cms. S.R.P. 18.00 S.M.B.Pouch - 7510 A simple pouch that will slide onto 50mm.webbing,designed to carry a rolled up Bowstone S.M.B.Velcro fastening on flap. Size: 17cm x 7cm x 7cm S.R.P. 10.00 Lifting Bag Pouch - 7512 A simple pouch that will slide onto 50mm webbing, designed to carry a Bowstone 36Kilo Lifting Bag. Size: 23cm x 7cm x 8cm S.R.P. 10.00 Mask Pouch - 7514 An ample sized pouch to carry a spare mask or similar and will slide onto 50mm webbing. Velcro fastening on flap. Size: 18cm x 13cm x 8cm S.R.P. 15.00 Suit Pocket - 7516 A heavy duty textured nylon pocket, attached to a neoprene back, which can be glued to most suits. With a Velcro flap and eyelets for drain holes. Size: 26cm x 20cm x 6cm Spare Reg Pouch - 7517 Designed to carry a second stage, and can be attached, by a webbing loop, around the neck of the bottle. With a Velcro flap this bag will keep your reg right where you want it until you need it. Size: 11cm x 9cm x 8cm S.R.P. 15.00 Joey Pouch - 7531 This pouch will fit across most B.C.s and with a permanent secure point to one side, and a snap bolt to the other a quick kit down will be easily achieved. A divider is inside the pouch and a Velcro flap. Size 20cms x 25cms x 9cms. S.R.P. 20.00 6

BAGS & POUCHES (CONTINUED) Zipped Cargo Pouch - 7533 The strap on this pouch will thread onto 50mm webbing, and can easily be removed by releasing the large slide release buckle.2 long straps can be fastened around the leg. The zip has a toggle attached for easy opening. Size: 25cm x 18cm x 9cm Cargo Pouch. (Velcro Fastening) - 7532 The strap on this pouch will thread onto 50mm webbing, and can easily be removed by releasing the large slide release buckle. 2 long straps can be fastened around the leg. Size: 25cm x 18cm x 10cm 2 Zipper Pouch - 7535 A 2 pocketed zipped pouch that can be threaded onto 50mm webbing. Both zips have toggles attached for easy opening. A plastic slide is attached on the reverse to prevent the bag moving around. Size: 18cm x 24cm x 7cm Deco System. (25 Meters) - 7542 This pouch contains 25 meters of 25mm tape, with D rings at 3,6,9,12 and 15 meters, and a small drop weight of.45 kilo. A snap bolt at the top of the bag aids easy removal, and a long strap at the base to go around the leg, Size: 28cm x 17cm x 11cm. S.R.P. 50.00 A 12 Battery Pouch & Lampholder - 7534 This packet contains a pouch to carry the battery pack, 2 straps to go around the bottle and an elasticised holder on a quick pull Velcro tab. Size: 60cm x 6cm. S.R.P. 20.00 Big Pouch - 7540 The ideal pouch to carry a reel and S.M.B. A snap bolt at the top to attach to a D ring and a strap to fasten around the leg. Size 28cms x17cms x 11cms. S.R.P. 20.00 Kit Bag - 7551 A generous sized duffel bag with a carry strap on the side and an eyeleted and drawstring top Size 80cm x 24cm x 24cm. S.R.P. 15.00 Mini Deco System (12 meters) - 7545 This pouch contains 12 meters of 25mm tape, with D rings at 3,6 and 9 meters and a small drop weight of.30 kilo. A snap bolt at the top of the bag aids easy removal, and a long strap at the base to go around the leg. Size 30cm x 18cm x 6cm. S.R.P. 35.00 Mat Bag - 7680 This bag opens up to be your own personal changing mat. Doubles as a good sized bag for carrying your suit. Complete with zip opening and handles all the way round. Size 88cm x 48cm. S.R.P. 17.00 Zipped Suit Pocket - 7518 A neoprene-backed pocket, zipped across the top. Size: 24cm x 17cm x 8cm 7

BAGS & POUCHES (CONTINUED) Handheld - 7549 Designed to take the Green Force or similar sized torches. S.R.P. 15.00 Tech Pouch with Scissors - 7547 A Tech Pouch (above) complete with a pair of stainless steel scissors in a pouch, sewn to the front on the tech pouch. Size: 24cm x 24cm x 9cm S.R.P. 50.00 Tech Pouch - 7546 Good sized pouch with a D ring sewn inside, a zipped opening and a Velcro front pocket for extra storage. Will slide onto 50mm webbing. Size: 24cm x 24cm x 9cm S.R.P. 30.00 F2 Pouch - 7537 Pouch designed to carry the F2 torch battery pack complete with single strap and lamp holder. S.R.P. 15.00 New Pouch: Series 1-7538 Will slide onto 50mm webbing. Has a 2-way zip on the top, and two eyelet drain holes on the bottom of the pouch. Includes a Velcro fastened pouch attached to the front for extra storage, ideal for a goody bag or SMB. Size: 19cm x 18cm x 8cm S.R.P. 30.00 New Pouch:Series 2-7539 Will slide onto 50mm webbing. 2- way zip on the top of the pouch, with two eyelet drain holes on the bottom. Four eyelets on the front for bungee-cord to be tied to. Ideal for holding a goody bag, SMB etc. Size: 20cm x 19cm x 8cm S.R.P. 30.00 Boat Bag - 7556 1000 Denier Cordura bag with wrap-around handles, big enough to carry all your diving accessories, and with an internal zipped pocket to keep keys and credit cards safe. Size: 34cm x 30cm x 68cm Mesh Kit Bag - 7555 The ideal bag to take out on the club boat. With a solid top and a net base kit will easily drain. Complete with a zip opening and handles all the way round Size 33cm x 68cm x 33cm. S.R.P. 18.00 Document Pouch - 7729 This pouch has been designed to carry all course documents.. Size: 35cm x 26cm SRP 3.00 Roll-up Pouch - 7541 When not in use, this pouch can be folded up and held secure with a stainless steel stud. Will thread on to 50mm webbing. It has two drain holes at the bottom. Velcro fastening. Size: 20cm x 30cm, 20 x 12cm (rolled up). SRP 18.00 8

MARKER BUOYS & LIFTING BAGS Mini Lift Bag - 7420 A 12 kilo lift bag manufactured from heavy duty weldable nylon. 2 heavy grade 50mm plastic D rings welded into the bottom opening. Colours. Yellow and Orange. Size 70cms x 50cms S.R.P. 19.00 Lift Bag (36 Kilo) - 7422 A 36 kilo lift bag manufactured from heavy duty weldable nylon.2 stainless steel 50mm D rings welded into the bottom opening. A grab loop is attached at one corner. Colours: Yellow and orange. Size: 100cms x 55cms S.R.P. 22.50 Triangular Marker And Tube - 7440 A triangular shaped, orally inflated marker buoy with 12 Kilo s of buoyancy. Manufactured from heavy duty weldable nylon. Size: 70cms x 50cms. Colours: Orange S.R.P. 22.50 Marker Buoy (10 Kilo) - 7430 A 10 Kilo Sausage style marker buoy, manufactured from heavy duty weldable nylon. The opening has been fluted to reduce air spillage. Size: 135cms x 16cms. Colours: Yellow and Orange S.R.P. 18.00 Marker Buoy (15 Kilo) - 7432 A 15 Kilo Sausage style marker buoy, manufactured from heavy duty weldable nylon. The opening has been fluted to reduce air spillage. Size: 147cms x 25cms. Colours: Yellow and Orange. S.R.P. 19.00 Marker Buoy And Tube - 7450 A Sausage style, orally inflated marker buoy with 15 Kilo s of buoyancy. Size: 150cms x 25cms. Colours: Yellow and Orange. S.R.P. 22.50 Marker Buoy Weight - 7612 A small pocket containing 0.23 Kilo of lead. Can be easily attached to the base of any of the above. S.R.P. 3.50 Self Sealing Marker Buoy - 7455 A self-sealing marker buoy with over pressure relief valve. Size: 135cms x 25cms. S.R.P. 35.00 Mini Marker Buoy 7456 A mini version of our popular 7455 Self-Sealng Marker Buoy. Has a piece of shock cord to hold buoy tightly together, but also promotes an easy method of releasing and erecting. Measurements: Rolled up - 16cm x 9cm, Unrolled - 135cm x 16cm S.R.P. 30.00 9

NEOPRENE ACCESSORIES Wet Hood - 8150 A 5mm neoprene wet hood. All seams glued and then stroble stitched and all raw edges bound. Colours: Black Sizes: Small, medium, large and extra large. S.R.P. 20.00 Dry Hood - 8151 A 5mm neoprene hood with a double sided smooth skin face seal. All seams glued and then stoble stitched. Colour: Black Sizes: Small, medium, large and extra large. S.R.P. 22.00 Cuff Protectors - 8160 A pair of 3mm neoprene gauntlets that will slide over your latex wrist seal and give it that extra protection S.R.P. 9.00 Watch Retainer - 8170 A 3mm neoprene retainer S.R.P. 3.50 Suunto Retainer - 8180 A 3mm neoprene retainer for a Suunto/similar sized computer. S.R.P. 3.60 Computer Bag - 8182 A neoprene bag with a Velcro fastener to put your computer or any other delicate instruments in. S.R.P. 12.00 Strap Cover - 8191 Simply thread your mask strap through this cover to give a more comfortable feel. S.R.P. 4.50 Shoulder Strap - 8301 A 3mm neoprene wrap-over with a Velcro fastening. Can easily be wrapped around your shoulder straps for added comfort. S.R.P. 12.00 Aladdin Retainer - 8181 A 3mm neoprene retainer for the Aladdin computers. S.R.P. 3.60 Mask Strap - 8190 A neoprene panel with Velcro tabs either side to attach to your mask. S.R.P. 5.00 Knee Pads - 8300 A pair of 5mm neoprene knee pads Sizes: Short and Long. S.R.P. 15.00 (S) 16.00 (L) Zipped Neoprene Pocket - 8305 A 3mm neoprene zipped pocket, with a toggle attached to the zip for easy opening. Can be glued to most suits. Hose Cover - 8302 A 3mm neoprene wrap-over with a Velcro fastening. Ideal for wrapping around a convoluted hose. S.R.P. 10.00 10

UNDERSUITS Bodywarmer - 4500 A full body suit manufactured from a very soft 240gm double-sided polyester fleece. Cuffs and ankles are finished with elasticised cuffing, thumb and foot loops. A 2way zip fastens the front. Tog 1.1 Unisex sizes, Small, Medium, Large and Extra-large. S.R.P. 35.00 Bodywarmer Socks - 4590 Socks to suit Bodywarmers. Unisex sizes: Small, Medium, Large & X-Large S.R.P.12.00 Warmerplus - 4600 A full body suit manufactured from a quilted 100gm breathable nylon to a very soft 240gm double-sided polyester fleece. Cuffs and ankles are finished with elasticised cuffing, thumb and foot loops.1 Velcro breast pocket, 2 hip pockets, and a 2 way front zip with zip guard completes this very comfortable suit. Tog 1.9 Unisex sizes, Small, Medium, Medium-large, Large and Extra-large. S.R.P.75.00 Warmer Plus Socks - 4690 Socks to suit Warmerplus. Unisex Sizes: Small, Medium, Large & X-Large S.R.P.20.00 Ultrawarm - 4700 A full bodysuit manufactured from a very thick 375gm polyester fibre pile. Cuffs and ankles are finished with elasticised cuffing, thumb and foot loops. 2 hip pockets and a 2 way front zip complete this Woolly Bear type suit. Tog 2.3. S.R.P.47.00 Ultrawarm Socks - 4790 Ultrawarm Socks to suit the above. Unisex Sizes: Small, Medium, Large & X-Large S.R.P.10.00 [4500] [4700] [4600] 11

UNDERSUITS (CONTINUED) Maxima (100gm Thinsulate) - 4900 With a 190gm-proofed nylon outer shell and a laminated fleece to 100gm Thinsulate inner layer, this proves to be a most comfortable yet durable suit. Cuffs and ankles are finished with elasticised cuffing, thumb and foot loops. 2 hip pockets and a 2 way zip with zip guard finish this most popular style. Tog 3.0 Unisex sizes, Small, Medium, Medium-large, Large and Extra-large. S.R.P. 100.00 Maxima Socks (100gm Thinsulate) - 4990 Socks to suit Maxima. Unisex Sizes: Small, Medium, Large & X-Large Optima (100 gm Thinsulate) - 4903 A full body suit manufactured from a quilted layer of 100gm breathable nylon100gm Thinsulate and polyester fleece. Cuffs and ankles are finished with elasticised cuffing, thumb and foot loops. 2 hip pockets and a 2 way zip with zip guard finish this most popular suit. Tog 2.7 Unisex sizes, Small, medium, Medium-large, Large and Extra-large. S.R.P. 90.00 Maxiplus (200gm Thinsulate) - 4950 A full body suit manufactured from an outer shell of a 4oz-proofed nylon and an inner shell of 200gm Thinsulate laminated to a polyester fleece. Cuffs and ankles are finished with elasticised cuffing, thumb and foot loops. 2 hip pockets and a 2way zip with zip guard finish this very warm suit. Tog 4. Unisex sizes, Small, Medium, Medium-large, Large and Extra-large. S.R.P. 110.00 [4900] [4950] [4903] 12

FLAGS The following flags are manufactured using a heavy grade waterproof nylon with ties top and bottom. Small A Flag - 7910 Size, 38cms x 38cms S.R.P. 10.00 Medium A Flag - 7911 Size, 60cms x 60cms S.R.P. 12.00 Large A Flag - 7912 Size, 90cmsx 90cms S.R.P. 16.00 These flags are commonly known as Pop Up Flags or Emergency Flags. The pole collapses into 3 sections and when fully extended measures 1.8 meters. A recent H.S.E. report suggested that the BOWSTONE flag was the most effective way to be seen at distance. Yellow or Orange Popup Flag - 7920 Flag size, 58cms x 54cms. Rolled up Length, 62cms. S.R.P. 17.50 A Flag - 7930 Flag size, 54cms x 54cms Rolled up Length, 62cms S.R.P. 17.50 International Divers Flag - 7940 Flag size, 58cms x 54cms Rolled up Length S.R.P. 17.50 13

BOTTLE ACCESSORIES Pony Bottle Bags S.R.P. 18.00 All our Pony Bottle Bags come with a net top and a drawstring closure and are securely attached to the main bottle by means of 2 50mm straps. 2 Litre Luxfer - 7730 2 Litre Faber - 7731 3 Litre Faber - 7732 3 Litre Luxfer - 7733 Bottle Covers S.R.P. 15.00 Our Bottle Covers offer excellent protection against the rigors of all aspects of diving, manufactured from heavy grade textured nylon with a net top and a drawstring closure. 10 Litre Tall (7inch) - 7740 12 Litre Tall (7inch) - 7741 15 Litre (8inch) - 7742 12 Litre Dumpy (8inch) - 7743 7 Litre Bottle Cover - 7745 5 Litre Bottle Cover - 7746 Net Bottle Covers S.R.P. 8.00 Our Net Bottle Covers offer protection against the rigors of all aspects of diving, manufactured from our unique yellow polyester net with a drawstring closure. 7 Litre Bottle Cover with Pouch - 7747 Textured nylon bottle cover with pouch attached at the side to carry a lifting bag or torch etc. 10 Litre Tall (7inch) - 7750 12 Litre Tall (7inch) - 7751 12 Litre Dumpy (8inch) - 7752 15 Litre (8 inch) - 7753 Stage Carry Strap - 7825 Consists of 1 piece of webbing looped to sit round the neck of the cylinder. Includes 4 stainless steel D Rings, 1 handle, and 1 Jubilee clip. All fully adjustable. Please specify cylinder size on order. S.R.P. 17.50 14

BOTTLE ACCESSORIES (CONTINUED) Pony Cam Set - 7735 2 straps with cam buckles at one end joined together, one to go round the main bottle and the other round a bottle or battery pack. Sold as a pair. S.R.P. 35.00 Cam Sets S.R.P. 10.00 All our Cam Sets are complete with a cam buckle, webbing and Velcro to fasten the loose webbing. 10 or 12 Litre Tall (7inch) 7738/7 12 or 15 Litre Dumpy (8inch) 7738/8 Stage Cam Sets S.R.P. 15.00 All our stage cam sets are complete with a cam buckle, webbing, a 50mm stainless steel D ring and 3 bar slide, a rubber bottle protector, and Velcro to fasten the loose webbing. 7 Litre (5.5 inch) 7739/5 10 or 12 Litre Tall (7 inch) 7739/7 12 or 15 Litre Dumpy (8 inch) 7739/8 Bottle Carry Straps S.R.P. 9.00 Our Bottle Carry Straps are manufactured using 50mm webbing, rubber, Velcro and a plastic handle. 7 Litre (5.5 inch) - 7819 10 or 12 Litre Tall (7 inch) - 7820 12 or 15 Litre Dumpy (8inch) - 7821 Stainless Steel Cam Set - 7748/5 /7 /8 SRP 18.00 Stainless Steel Stage Cam Set - 7749/5 /7 /8 SRP 22.00 15

ACCESSORIES Coloured Hood - 7520 A lightweight coloured hood that can be worn over your neoprene hood. Elasticised at the back with a Velcro fastening at the front. One size fits all S.R.P.15.00 Tank Clacker - 7810 A piece of 6mm shock cord and a plastic toggle. Used for signalling other divers underwater, or holding a second stage on a stage bottle. S.R.P. 2.50 Bolt Snap - 8121 A Nickel Plated Snap Bolt suitable for 25mm webbing. S.R.P. 2.50 Small Bolt Snap - 8123 Stainless Steel bolt snap. 850mm long. S.R.P. 7.95 Large Bolt Snap - 8124 Stainless Steel bolt snap. 1200mm long. S.R.P. 8.65 Double-Ended Bolt Snap - 8126 Stainless Steel bolt snap. 1,500mm long. S.R.P. 8.65 Harness Slide - 8272 Can be threaded onto 50mm webbing. S.R.P. 2.50 Pillar Valve Dust Cap - 7800 A square cover that fits neatly over your pillar valve. S.R.P. 1.00/1 Spare Reg Holder - 7840 A Pull-tab with a Velcro fastening that will fit most regulators. S.R.P. 4.25 2 Hose Wrap - 7850 Designed to take 2 contents gauge hoses. Both gauges can then be read at the same time. S.R.P. 7.50 Slide Release Buckle (25mm) 8270 S.R.P. 0.75 Slide Release Buckle (50mm) 8271 S.R.P. 1.50 50mm Round Ring - 8292 Stainless Steel 50mm round ring S.R.P. 6.00 Angled D Ring - 8291 Can be threaded onto 50mm webbing. S.R.P. 10.00 50mm 316 Stainless Steel Buckle 8141 Can be threaded onto 50mm webbing. Made from (316) Stainless Steel. SRP 15.00 Mask Strap 8120/1 Black / 8120/2 Clear Silicon. Available in clear or black. SRP 3.00 16

ACCESSORIES CONTINUED Titanium Knife - 7774 High quality titanium knife with sheath. 100% titanium blade. Blade length: 11 cm S.R.P. 65.00 Torch Helmet - 8500 A Fibreglass helmet with an adjustable back and chin strap. There are 3 flat areas to attach torches. S.R.P. 50.00 Proper Knife - 7775 For the older divers amongst us, you ll remember this one! Comes with sheath and two rubber straps. Blade length: 17 cm Folding Knife - 7776 The ideal knife to carry in your kit box or on the boat. Folds in and out easily. Blade length: 9 cm S.R.P. 14.95 Knife - 7777 Designed to be carried on the end of a hose. This knife can be positioned in a very convenient place. Comes with sheath and clamp to attach to hose. Blade Length: 8 cm S.R.P. 18.00 Stage Bottle Strap - 8122 S.R.P. 10.00 Inflator Gun - 8127 This handy piece of kit can be permanently inserted into a low pressure hose. Ideal for inflating buoyancy devices (see page 11) S.R.P. 10.00 O Ring Holder (incl. O Rings) - 8128 This handy device that can be used for holding O Rings or used as a watertight container. S.R.P. 5.50 300 Bar Nitrox Clean Contents Gauge - 8129 The ideal Oxygen clean contents gauge for a stage cylinder. S.R.P. 65.00 Black Mask - 8130 High quality silicon mask, with adjustable strap. Hose Clip The ideal solution for tidying up loose hoses. Made from 25mm webbing. Single Hose Clip 7851/1 SRP 3.00 Double Hose Clip 7851/2 SRP 3.50 Triple Hose Clip 7851/3 SRP 4.00 17

ACCESSORIES (CONTINUED) 60mm Stainless Steel Karabiner - 8131 S.R.P. 4.45 Billy Ring - 8132 Can slide onto 50mm webbing. Named after the famous Billy S.R.P. 5.00 Mini Clip - 8133 Stainless steel mini karabiner. 34mm long. S.R.P. 5.00 25mm Stainless Steel Split Ring - 8135 S.R.P..0.80 25mm Stainless Steel Ratchet Buckle - 8143 Includes 3m of black 1 webbing. Ideal for strapping bottles down on boats. S.R.P. 20.00 Jubilee Clip 8137/1/2/3 Stainless steel with a rubber protecting pad. S.R.P. 3.00 Heavy-Duty Karabiner - 8136 Stainless steel. 10cm long S.R.P. 6.00 [8137/1] [8137/2] [8137/3] 3 Litre Pony 5/7 Litre Stage 12/15 Litre Stage Rubber Fins - 8139 A proper pair of solid rubber fins, again for the older divers amongst us. S.R.P. 40.00 Scissors in Pouch - 7772 A pair of scissors tightly held in a strong pouch. Trade 8.00 S.R.P. 15.00 Shoulder Straps - 8138 A pair of padded webbing shoulder straps, with three easy slide straps S.R.P. 15.00 (per pair) Spare Reg. Ball - 8140 Clips onto your B.C. Can push mouthpiece of reg. into hole on the bottom. Easy to apply and release. S.R.P. 3.50 50mm Stainless Steel Cam Buckle - 8141 S.R.P. 15.00 Scissors & Knife in Pouch - 7773 A pair of scissors and a knife tightly held in a strong pouch by two studs. Trade 13.00 S.R.P. 26.00 18 50mm Nylon Unbreakable Cam Buckle 8142 S.R.P. 5.00 Baseball Cap - 8651 A black baseball cap with a yellow lining on the front of the peak. Large Bowstone Diving logo on the front. S.R.P. 9.99

ACCESSORIES CONTINUED REBREATHER EQUIPMENT Rebreather Loop Covers 7557 A set of 4 covers, made to fit your rebreather, designed to go around the loop section of an AP rebreather. SRP 9.00 Neoprene Rebreather Loop Covers - 7952 A pair of neoprene covers to cover and protect you loop of your rebreather. SRP 12.00 Rebreather Handset Pouch - 7951 A pouch designed to hold and protect the handset whilst carrying the rebreather. Aims to prevent damage to your handset, and make carrying the rebreather a whole lot easier - stops things hanging and dragging along the floor. Made from high quality neoprene, with a clip on the top, this pouch can be attached to anywhere on the rebreather (E.g. D Rings). SRP 10.50 Add A D Ring - 7953 This product has been designed to fold around a piece of webbing, and ultimately enable you too add a D Ring to any piece of webbing on your kit. For example, you could fold this round the webbing shoulder strap on our 7691 Quick Release Harness Belt. Consists of 50mm/25mm webbing, a stainless steel D ring and 2 stainless steel stud sets. SRP 9.00 Trim Weight Pouch - 7548 A small pouch designed to carry up to 2 Kilos (4 lbs). Can slide onto 50mm webbing. It is designed to be attached to a bottle, i.e. threaded onto a cam band SRP 15.00 19