Sales: Technical: Fax:

Similar documents
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of

High Power Thick Film Chip Resistor 2512

Carbon Film Fixed Resistor Axial Leaded

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard

SMD High Power Precision Resistors

DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%

SPECIFICATION FOR APPROVAL. Approved by

High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors

DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free

Metal Film Resistors, Industrial, Precision

Automotive and Anti-Sulfuration Chip Resistor 0402

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors

Precision Leaded Resistors

DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512

Metal Film Resistors, Industrial, Precision

High Ohmic/High Voltage Metal Film Leaded Resistors

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free

Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.

WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic / High Voltage Metal Glaze Leaded Resistors

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603

High Ohmic/High Voltage Metal Glaze Leaded Resistors

Part Marking Instructions Chip Resistors

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Military, MIL-PRF Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

Metal Film Resistors, Non-Magnetic, Industrial, Precision

Metal Film Resistors, Military, MIL-R Qualified, Type RN and MIL-PRF Qualified, Type RL

Power Resistor Thick Film Technology

DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series 5%, 2%, 1% sizes 0805/1206

50 W Power Resistor, Thick Film Technology, TO-220

DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164

DATA SHEET THICK FILM CHIP RESISTORS Introduction

High Surge Axial Cemented Wirewound Resistors

General information. Please refer to our Internet address ( for updated information on KEMET products, services and news.

3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max

SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant

SMD PTC - Nickel Thin Film Linear Thermistors

Standard Thick Film Chip Resistors

WCAP-CSGP Ceramic Capacitors

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC

Metal Film Resistors, Industrial, Flameproof

Product Specification

Metallized Polypropylene Film Capacitors DC-Link Capacitor

Metal Film Resistors, Military, MIL-R Qualified, Precision, Type RN and MIL-PRF Qualified, Type RL

Professional Thin Film MELF Resistors

Pulse Proof Thick Film Chip Resistors

Mylar polyester film. Electrical Properties. Product Information. Dielectric Strength. Electrode Size. Film Thickness

Contents. 12. Lot Number Reel Packing Structure Precaution for Use Hazard Substance Analysis Revision History 18

Capacitance Cap. Tol. Suffix construction. Rated voltage

1. Scope This specification is applied to ICR Product Specification Table 1 No. Item Rated Performance Remark

Precision Surface Mount Resistors Wirewound or Metal Film Technologies

Selection Guide for Conversion of Carbon Composition Resistors

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications

Power Meter Series 700

Universal MATE-N-LOK Connectors

0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B

SPECIFICA MATERIALE N RESISTORE DI POTENZA AVVOLTO SU TELAIO METALLICO Mod. RDP600 POWER RESISTOR WOUND ON METALLIC FRAME 220 ±

Product Specification Micro-SIM H1.24 Push-Pull Type 108. This specification covers the requirements for product performance, test methods and quality

CPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number:

Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount

Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications

1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001

Power Dissipation Considerations in High Precision Vishay Sfernice Thin Film Chips Resistors and Arrays (P, PRA etc.) (High Temperature Applications)

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Application Guide Film Capacitors

MBA/SMA 0204, MBB/SMA 0207, MBE/SMA Professional Professional Metal Film Leaded Resistors

DC Film Capacitors MKT Radial Potted Type

Current and Temperature Ratings

SUCCESS EPCOS Capacitors

Interference Suppression Film Capacitors MKP Radial Potted Type

MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision Precision Thin Film Chip Resistors

Thin Film MELF Resistors

Pulse Proof, High Power Thick Film Chip Resistors

SELECTION GUIDE. Nominal Input

SPEED CONTROL SYSTEM

5W HI-POWER LED SPECIFICATION

How To Build A Low Voltage Capacitor Lvcp

Electric Rotary Actuator - On/Off or programmable control actuator

AC and Pulse Film Foil Capacitors KP Radial Potted Type

Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts

650W Single Output Power Supply

LITHIUM BATTERY CR123A SPECIFICATION

Ultra Precision Metal Film Leaded Resistors

Peltier Application Note

Metal Film Resistors, Pulse Withstanding Protective

1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA

IR Edixeon Emitter. 1W Edixeon

DS 600. A contact free flux gate based current measurement sensor 600A rms

DC Film Capacitors MKT Radial Potted Type

PV module safety qualification according to IEC 61730:2004 EN 61730:2007

DISCRETE SEMICONDUCTORS DATA SHEET. BLF244 VHF power MOS transistor

.093 [2.36] Commercial Pin and Socket Connectors

FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %

Technical Data Sheet 3mm Infrared LED, T-1

SMD Low Power LED /XK2C-BXXXXXXXXXX/ET

Transcription:

DATA SHEET Metal film resistors Order code Manufacturer code Description 62-7950 FMF-100F-470K-T 470K 1W METAL FILM RESISTOR (RC) 62-7954 FMF-100F-1M-T 1M 1W METAL FILM RESISTOR (RC) 62-7942 FMF-100F-100K-T 100K 1W METAL FILM RESISTOR (RC) 62-7944 FMF-100F-150K-T 150K 1W METAL FILM RESISTOR (RC) 62-7946 FMF-100F-220K-T 220K 1W METAL FILM RESISTOR (RC) 62-7930 FMF-100F-4K7-T 4K7 1W METAL FILM RESISTOR (RC) 62-7934 FMF-100F-15K-T 15K 1W METAL FILM RESISTOR (RC) 62-7938 FMF-100F-47K-T 47K 1W METAL FILM RESISTOR (RC) 62-7924 FMF-100F-1K5-T 1K5 1W METAL FILM RESISTOR (RC) 62-7926 FMF-100F-2K2-T 2K2 1W METAL FILM RESISTOR (RC) 62-7928 FMF-100F-3K3-T 3K3 1W METAL FILM RESISTOR (RC) 62-7894 FMF-100F-3R3-T 3R3 1W METAL FILM RESISTOR (RC) 62-7957 FMF-100F-2R7-T 2R7 1W METAL FILM RESISTOR (RC) 62-7898 FMF-100F-10R-T 10R 1W METAL FILM RESISTOR (RC) 62-7956 FMF-100F-1R8-T 1R8 1W METAL FILM RESISTOR (RC) 62-7892 FMF-100F-2R2-T 2R2 1W METAL FILM RESISTOR (RC) 62-7900 FMF-100F-15R-T 15R 1W METAL FILM RESISTOR (RC) 62-7940 FMF-100F-68K-T 68K 1W METAL FILM RESISTOR (RC) 62-7902 FMF-100F-22R-T 22R 1W METAL FILM RESISTOR (RC) 62-7912 FMF-100F-150R-T 150R 1W METAL FILM RESISTOR (RC) 62-7958 FMF-100F-3R9-T 3R9 1W METAL FILM RESISTOR (RC) 62-7960 FMF-100F-6R8-T 6R8 1W METAL FILM RESISTOR (RC) 62-7918 FMF-100F-470R-T 470R 1W METAL FILM RESISTOR (RC) 62-7932 FMF-100F-10K-T 10K 1W METAL FILM RESISTOR (RC) 62-7936 FMF-100F-22K-T 22K 1W METAL FILM RESISTOR (RC) 62-7952 FMF-100F-680K-T 680K 1W METAL FILM RESISTOR (RC) 62-7922 FMF-100F-1K-T 1K 1W METAL FILM RESISTOR (RC) 62-7961 FMF-100F-8R2-T 8R2 1W METAL FILM RESISTOR (RC) 62-7914 FMF-100F-220R-T 220R 1W METAL FILM RESISTOR (RC) 62-7904 FMF-100F-33R-T 33R 1W METAL FILM RESISTOR (RC) 62-7906 FMF-100F-47R-T 47R 1W METAL FILM RESISTOR (RC) 62-7916 FMF-100F-330R-T 330R 1W METAL FILM RESISTOR (RC) 62-7955 FMF-100F-1R5-T 1R5 1W METAL FILM RESISTOR (RC) 62-7896 FMF-100F-4R7-T 4R7 1W METAL FILM RESISTOR (RC) 62-7959 FMF-100F-5R6-T 5R6 1W METAL FILM RESISTOR (RC) 62-7920 FMF-100F-680R-T 680R 1W METAL FILM RESISTOR (RC) 62-7948 FMF-100F-330K-T 330K 1W METAL FILM RESISTOR (RC) 62-7962 FMF-100F-1R2-T 1R2 1W METAL FILM RESISTOR (RC) 62-7910 FMF-100F-100R-T 100R 1W METAL FILM RESISTOR (RC) 62-7890 FMF-100F-1R-T 1R 1W METAL FILM RESISTOR (RC) 62-7908 FMF-100F-68R-T 68R 1W METAL FILM RESISTOR (RC) Metal film resistors The enclosed information is believed to be correct, Information may change without notice due to product improvement. Users should ensure that the product is suitable for their use. E. & O. E. Page 1 of Revision A 20/02/2007 7 Sales: 01206 751166 Technical: 01206 835555 Fax: 01206 751188 Sales@rapidelec.co.uk Tech@rapidelec.co.uk www.rapidonline.com

MR100 1W 1% Metal Film Fixed Resistors Flame-proof Coating Type Page 1

1. INTRODUCTION This series of flame-proof type Metal Film Resistors are manufactured by vacuum deposit metal film on high thermal conductivity ceramic rods, and are coated with layers of gray color flame-proof lacquer. These flame-proof metal film resistors are designed to replace the metal oxide resistors and low power wire wound resistors, where flame-proof and small size is needed. 2. ELECTRICAL CHARACTERISTICS Power rating @ 70ºC Operating temperature range Maximum working voltage Maximum overload voltage Dielectric withstanding voltage 1W 55ºC to +155ºC 500V 1000V 1000V Page 2

3. POWER RATING Power derating The rated power at the temperature in excess of 70ºC shall be derated in accordance with the graph below. 70 100 80 Rated Power (%) 60 40 20 0 0 40 60 80 100 120 140 160 155 Ambient Temperature (ºC) Rated voltage The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: Where E: E= R P Continuous rated DC or AC (rms) working voltage (V) P: Rated power (W) R: Resistance value (Ω) Page 3

4. DIMENSIONS H L d D Dimension Value L 11 ±1.0 D 4.5 ±0.5 H 35 ±3 d 0.8 ±0.1 mm Page 4

5. CHARACTERISTICS Short time overload : 2.5x RCWV for 5s ± (0.5% + 0.05Ω) Insulation resistance In V-Block >1000MΩ Solderability 260º for 5s ±0.5 95% minimum coverage Resistance to solvent Trichloroethane for 1 mins. with ultrasonic No deterioration of coatings and markings Terminal strength Direct load for 10s in the direction of the terminal leads 2.5kg (24.5N) Pulse overload 4x RCWV 10,000 cycles (1s on, 25s off) ± (2% +0.05Ω) Load life in humidity 40ºC ±2ºC 90 to 95% RH at RCWV for 1000 hours (1.5hr. on, 0.5hr. off) ± (1.5% +0.05Ω) Page 5

5. CHARACTERISTICS (continued) Load life : 70ºC at RCWV for 1000 hr. (1.5hr. on, 0.5hr. off) ± (1% + 0.05Ω) Temperature cycling 65ºC room temp. 150ºC room temp. for 5 cycles ± (0.5% + 0.05Ω) Resistance to soldering heat 350ºC ±10ºC for 3s ±0.5s ± (0.5% + 0.05Ω) Rated Continuous Working Voltage (RCWV) = power rating resistance value Page 6