Isolation of Optically Pure (S)-(+)-Ibuprofen

Similar documents
Enantiomers: Synthesis, characterization, and resolution of tris(ethylenediamine)cobalt(iii) chloride Introduction:

experiment5 Understanding and applying the concept of limiting reagents. Learning how to perform a vacuum filtration.

CHEM 2423 Recrystallization of Benzoic Acid EXPERIMENT 4 - Purification - Recrystallization of Benzoic acid

Experiment 3: Extraction: Separation of an Acidic, a Basic and a Neutral Substance

Extraction: Separation of Acidic Substances

Separation by Solvent Extraction

PHYSICAL SEPARATION TECHNIQUES. Introduction

Isolation of Caffeine from Tea

SEPARATION OF A MIXTURE OF SUBSTANCES LAB

Hands-On Labs SM-1 Lab Manual

Experiment 8 Synthesis of Aspirin

ISOLATION OF CAFFEINE FROM TEA

PURIFICATION TECHNIQUES

Taking Apart the Pieces

PREPARATION AND PROPERTIES OF A SOAP

Experiment 8 Preparation of Cyclohexanone by Hypochlorite Oxidation

Acid-Base Extraction.

Recrystallization II 23

Organic Chemistry Lab Experiment 4 Preparation and Properties of Soap

Page 1 of 5. Purification of Cholesterol An Oxidative Addition-Reductive Elimination Sequence

The most common active ingredient used in deodorants is aluminium chlorohydrate. But not all deodorants contain aluminium chlorohydrate:

Saturated NaCl solution rubber tubing (2) Glass adaptor (2) thermometer adaptor heating mantle

EXPERIMENT 3 (Organic Chemistry II) Nitration of Aromatic Compounds: Preparation of methyl-m-nitrobenzoate

Sugar Identification using Polarimetry

Experiment 5 Preparation of Cyclohexene

Preparation of an Alum

Synthesis of Aspirin and Oil of Wintergreen

Apparatus error for each piece of equipment = 100 x margin of error quantity measured

Experiment #10: Liquids, Liquid Mixtures and Solutions

EXPERIMENT 9 (Organic Chemistry II) Pahlavan - Cherif Synthesis of Aspirin - Esterification

Mixtures and Pure Substances

Green Principles Atom Economy Solventless Reactions Catalysis

Making Biodiesel from Virgin Vegetable Oil: Teacher Manual

SYNTHESIS AND ANALYSIS OF A COORDINATION COMPOUND OF COPPER

SUPPLEMENTARY MATERIAL

Chem 100 Lab Experiment #9 - ACID/BASE INDICATORS

Organic Lab 1 Make-up Experiment. Extraction of Caffeine from Beverages. Introduction

The Properties of Water (Instruction Sheet)

CH243: Lab 4 Synthesis of Artificial Flavorings by Fischer Esterification

Isomers Have same molecular formula, but different structures

Chemical versus Physical Changes

Name Lab #3: Solubility of Organic Compounds Objectives: Introduction: soluble insoluble partially soluble miscible immiscible

The Synthesis of trans-dichlorobis(ethylenediamine)cobalt(iii) Chloride

PET Recycling. Nicholas Robusto Maggie Ifarraguerri Nathaniel Lawton Isabel Hefner

SODIUM CARBOXYMETHYL CELLULOSE

Properties of Acids and Bases

Recovery of Elemental Copper from Copper (II) Nitrate

EXPERIMENT 7 Reaction Stoichiometry and Percent Yield

Determination of a Chemical Formula

ACID-BASE TITRATIONS: DETERMINATION OF CARBONATE BY TITRATION WITH HYDROCHLORIC ACID BACKGROUND

Experiment 8 - Double Displacement Reactions

Non-polar hydrocarbon chain

DNA SPOOLING 1 ISOLATION OF DNA FROM ONION

Distillation Experiment

Investigation M3: Separating Mixtures into Component Parts

Physical and Chemical Properties and Changes

Chapter Test A. Elements, Compounds, and Mixtures MULTIPLE CHOICE. chemically combined? MIXs2 a. element b. compound c. mixture d.

Liquid/liquid Extraction 63 LIQUID/LIQUID SEPARATION: EXTRACTION OF ACIDS OR BASES FROM NEUTRAL ORGANICS

Table 1. Common esters used for flavors and fragrances

Experiment 16-Acids, Bases and ph

Synthesis of Isopentyl Acetate

CHEMICAL DETERMINATION OF EVERYDAY HOUSEHOLD CHEMICALS

Distillation of Alcohol

One problem often faced in qualitative analysis is to test for one ion in a

Experiment #8 properties of Alcohols and Phenols

Stoichiometry Limiting Reagent Laboratory. Chemistry 118 Laboratory University of Massachusetts, Boston

Experiment 12- Classification of Matter Experiment

Pre-Lab Notebook Content: Your notebook should include the title, date, purpose, procedure; data tables.

OXIDATION-REDUCTION TITRATIONS-Permanganometry

CH204 Experiment 2. Experiment 1 Post-Game Show. Experiment 1 Post-Game Show continued... Dr. Brian Anderson Fall 2008

Compounds vs mixtures. Physics and Chemistry IES Jaume Salvador i Pedrol February 2009

SOLUBILITY OF A SALT IN WATER AT VARIOUS TEMPERATURES LAB

Solubility Curve of Sugar in Water

A Greener Synthesis of Creatine

Experiment 7: Titration of an Antacid

Heterogeneous Homogenous. Mixtures; Solutions. Phases of matter: Solid. Phases of Matter: Liquid. Phases of Matter: Gas. Solid, Liquid, Gas

Physical Properties of a Pure Substance, Water

Pure Solid Compounds: Molecules held together in rigid formations by intermolecular forces.

The Empirical Formula of a Compound

Steam Distillation of Lemongrass Oil

Marmara Üniversitesi Fen-Edebiyat Fakültesi Kimya Bölümü / Biyokimya Anabilim Dalı PURIFICATION AND CHARACTERIZATION OF PROTEINS

EXPERIMENT 2 (Organic Chemistry II) Pahlavan/Cherif Diels-Alder Reaction Preparation of ENDO-NORBORNENE-5, 6-CIS-CARBOXYLIC ANHYDRIDE

Cocaine extraction from Coca Leaves

Chapter 5, Lesson 3 Why Does Water Dissolve Salt?

Synthesis of tetraamminecopper(ii) sulfate, [Cu(NH 3 ) 4 ]SO 4 The reaction for making tetraamminecopper(ii) sulfate and some molar masses are:

Dry Ice Color Show Dry Ice Demonstrations

MOLECULAR WEIGHT BY BOILING POINT ELEVATION

The Grignard Reaction. Preparation of Benzoic Acid

Laboratory 22: Properties of Alcohols

Phase Diagram of tert-butyl Alcohol

Lab #13: Qualitative Analysis of Cations and Anions

Experiment #7: Esterification

Extraction Theory. Org I Lab W. J. Kelly. Liquid-liquid extraction is a useful method to separate components (compounds) of a mixture

ph: Measurement and Uses

Stoichiometry Limiting Reagent Laboratory. Chemistry 118 Laboratory University of Massachusetts, Boston

Determination of Molar Mass by Boiling Point Elevation of Urea Solution

EXPERIMENT Aspirin: Synthesis and NMR Analysis

Chapter 5 Student Reading

GRIGNARD REACTION: PREPARATION OF TRIPHENYLMETHANOL (12/22/2009)

CHM220 Nucleophilic Substitution Lab. Studying S N 1 and S N 2 Reactions: Nucloephilic Substitution at Saturated Carbon*

Transcription:

CHEM 333L Organic Chemistry Laboratory Revision 1.1 Isolation of Optically Pure (S)-(+)-Ibuprofen In this laboratory exercise we will isolate (S)-(+)-Ibuprofen from a racemic mixture of both enantiomers of this compound. (S)-Ibuprofen (R)-Ibuprofen This will be accomplished by treating the racemic mixture of Ibuprofen with (S)-(-)- - Phenethylamine, whose molecules are themselves chiral, to form (S,S) and (R,S) Ibuprofen/Phenethylamine diastereomeric salts. Because the (S,S) salt is much less soluble than the (R,S) salt, the (S,S) salt can be separated from the (R,S) salt by simple filtration. Subsequently the (S,S) Ibuprofen/Phenethylamine salt can be recrystallized to increase its purity and then acidified to recover pure (S)-(+)-Ibuprofen. The (S)-(+)-Ibuprofen can be extracted from the acidic solution and solidified after removal of the extraction solvent. Although alike in almost all of their chemical and physical properties, enantiomers can behave very differently in biological systems. This is because the enzymes that act on biomolecules and other bioreceptors have active sites that are chiral. In the present case, (S)-(+)-Ibuprofen is found to be a much more effective analgesic than is a racemic mixture of the Ibuprofen enantiomers. Thalidomide provides another example of how different enantiomers of a compound can behave quite differently. (S)-Thalidomide (R)-Thalidomide

P a g e 2 Thalidomide, as a racemic mixture, was the active ingredient in a prescription to relieve the symptoms of morning sickness in pregnant women. The drug was widely used in the late 1950 s and early 1960 s, until it was linked to severe birth-defects in the children born to women using the medication. It turns out, the (R) enantiomer is effective against morning sickness, but the (S) isomer causes birth defects. Resolution of racemic mixtures is typically very difficult because, as mentioned, enantiomeric substances are alike in most of their chemical and physical properties. Louis Pasteur was able to resolve a racemate of Tartrate salts by mechanically separating physically distinct crystals of the enantiomers. Tarter, or crude potassium acid tartrate, had long been known to vintners as a solid which separates as a sludge from wine during fermentation; it is poorly soluble in alcohol. Tartaric acid, a normal constituent of grapes, was first isolated and studied by Scheele and subsequently was produced commercially. This was the dextro-rotatory form of the acid. Around 1820 Charles Kestner, a manufacturer of chemicals in Than in the Haut-Rhin, encountered a new form of tartaric acid which behaved differently than the usual product; he was unable to produce more of it. The unique acid was studeied by Johann Friedrich John of Berlin, later by Gay-Lusaac, who named it racemic acid (L. racemus, grape), and still later by Berzelius, who called it paratartaric acid. Biot showed that racemic acid and its salts do not influence polarized light. In a careful study of the sodium ammonium salts of tartaric and racemic acids, Mitscherlich in 1844 reported that the salts have the same crystalline form, their only difference being that tartaric acid is dextro-rotatory and racemic acid is inactive. Pasteur suspected that Mitscherlich and other crystallographers might have overlooked a dissymmetry in the crystals. His own painstaking investigation of the crystals of these salts showed that the tartrate crystals were truly hemihedral. The racemic crystals, which he expected to be symmetrical, he found were also hemihedral. Closer examination revealed that in the tartrate crystals the hemihedral faces were all oriented in the same way, but that in the racemic crystals the faces of some were oriented toward the right whereas the faces of others were oriented toward the left. Pasteur laboriously separated the right-handed and left-handed crystals and dissolved each kind in water. He noted that one solution rotated polarized light toward the right and that the other solution rotated the light to the left.... No one realized until later that Pasteur had been exceedingly fortunate in preparing his crystals, in the choice of both compound and of working conditions. When sodium ammonium tartrate crystallizes from a hot concentrated solution, the crystals are fully symmetrical and the monohydrate contains equal proportions of the dextro- and levo-rotatory molecules. But there is a transition point at 28 o C. When the tartrate crystallizes below this temperature it forms the tetrahydrate and half the crystals are pure dextro- and the other half pure levo-rotatory molecules. The Development of Modern Chemistry Aaron J. Ihde Our resolution of racemic Ibuprofen will involve adding a Resolving Agent, (S)-(-)- Phenethylamine, to the racemic mixture. This Resolving Agent will undergo an acid-base reaction with Ibuprofen, producing two salts that are diastereomers.

P a g e 3 Unlike enantiomers, diastereomers have very different chemical and physical properties. In this case, the (S,S) salt is much less soluble in Water than the (R,S) salt and can be separated out by simply filtering the reaction mixture. Once isolated, the (S,S) salt can be acidified to regenerate (S)-(+)-Ibuprofen in its unionized form.

P a g e 4 The unionized Ibuprofen has a low Water solubility and can be extracted into an organic solvent like MTBE (Methyl tert-butyl Ether). Once extracted, the extraction solvent can be dried and stripped off. The resulting (S)-(+)-Ibuprofen then tends to solidify. In another laboratory, our (S)-(+)-Ibuprofen will be tested for optical purity using polarimetry; a difference in the rotation of plane polarized light is one of the few physical properties that distinguishes enantiomers. (Reaction schemes adapted from The Resolution of Ibuprofen, 2-(4 -Isobutylphenyl)propionic Acid by James V. McCullagh reported in The Journal of Chemical Education, Vol. 85 (2008).)

P a g e 5 Pre-Lab Questions 1. Identify the assymetric carbon(s) in Menthol. How many stereoisomers are possible for Menthol? Sketch them using a wedge-and-dash notation. 2. If (S)-Ibuprofen is more active pharmacologically, why are Ibuprofen prescriptions still prepared from a racemic mixture of the enantiomers? 3. Besides optical rotation, what is a physically distinct difference between (+)-Carvone and (-)-Carvone? 4. Tartaric acid occurs in two forms; naturally occuring l-(+)-tartaric Acid and d-(-)-tartaric Acid. d-(-)-tartaric Acid l-(+)-tartaric Acid Why is d-tartaric Acid levo-rotatory? Provide (R),(S) designations for the number 2 and number 3 carbons in d-(-)-tartaric Acid and l-(+)-tartaric Acid.

P a g e 6 Procedure Adapted from The Resolution of Ibuprofen, 2-(4 -Isobutylphenyl)propionic Acid by James V. McCullagh reported in The Journal of Chemical Education, Vol. 85 (2008). Generation of the Diastereomeric Salts To a 100 ml round bottom flask, add a stir bar, 3.0g of racemic Ibuprofen and 30 ml of 0.24 M KOH. Clamp the flask into a heating mantle and insert a thermometer. Initiate stirring. Heat the solution to a temperature between 75 o C-85 o C. Most but not all of the Ibuprofen will dissolve at this temperature. Next, add 0.9 ml of (S)-(-)- Phenethylamine dropwise and slowly to the flask. (Wear gloves when handling this compound as it is irritating to the skin. Recap the bottle immediately after use as the compound reacts with the Carbon Dioxide in the Air.) Precipitate will form within a few minutes. Keep the solution at this temperature for 1 hour. Remove the flask from the sand bath and allow it to cool to Room Temperature. Collect the precipitated slat by vacuum filtration. Wash the solid with a small amount (~2-3 ml) of ice cold Water. Weigh the solid. Recrystallization of the (S,S) Ibuprofen/Phenethylamine Salt Place the salt in a 50 ml beaker that contains a boiling stone. Add 2-Propanol (16 ml per gram, dry weight, of salt. If the salt was not dried before weighing use 30 ml of 2-Propanol.). Place a watch glass on top of the beaker and heat the solution to a boil. At this point all the solids should dissolve. (If all the solid does not dissolve, remove from heat and add 1-2 ml 2-Propanol. Bring back to reflux.) Remove the solution from the heat source and allow it to cool to Room Temperature; 1-15 minutes. Filter the resulting crystals. Wash the crystals with 2-3 ml of ice cold Water. Weigh the crystals after they are dry. Set aside enough for a melting point determination. Recovery of (S)-(+)-Ibuprofen Place the recrystalized salt into a 50 ml beaker. Add a stir bar and 25 ml of 2M H 2 SO 4. Stir the solution for 5 minutes. The crystals will quickly dissolve and will leave behind thick oily droplets suspended in the solution. Extract the aqueous layer with 15 ml of MTBE three times. Combine the organic layers together and extract them once with 15 ml of Water and the once with 15 ml of sat d aqueous NaCl. Dry the organic layer over anhydrous Sodium Sulfate. Transfer the MTBE solution to a pre-weighed beaker with a boiling chip. Boil off all the ether on a sand bath set to a temperature of 100 o C. The product at first will be a thick, clear oil but it usually solidifies on standing. Weigh the product. If solid, take a melting point. Determine your percentage recovery. (What should this value be?)

P a g e 7 Post Lab Questions 1. What is the ph of the 0.24 M KOH solution used in the first part of the lab procedure? What is the purpose of using a basic solution for this reaction mixture? 2. How do the melting points of enantiomers compare to each other? How does the melting point of a racemate compare to that of the enantiomers? (There are a couple of cases here.) How do the melting points of diastereomers compare to each other? 3. Why do we not try to recover (R)-(-)-Ibuprofen from the filtrate at the end of the first procedure? 4. What is the purpose of washing the MTBE with sat d aqueous NaCl? (You may wish to consult your laboratory instructor about this.)