0 LIQUID PROCESS FILTRATION - PROCESS LIQUID BAGS Standard Felt Liquid Filter Bags Micron Ratings From 1 to 200 All Industry Standard and Custom Sizes Available Broad chemical compatibility High flow/low pressure drop Sewn or fully-welded construction, Handles on all bags Choice of steel or molded plastic snap-seal rings Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon ) Felt Bag Materials Constructed using 100% synthetic fibers in polypropylene, polyester, Nomex and Teflon. The proper combination of fiber diameters, weights and thicknesses result in an economical depth filter media. To reduce fiber migration, Polypropylene bags are treated with a glazed finish, while Polyester and Nomex bags are singed. Polypropylene and Polyester materials meet FDA regulations for food contact under CFR21, Section 177.1520 Silicone-free construction, High dirt holding capacity Ability to remove both solid and gelatinous particles Low cost Glazed/singed finish on Polypropylene & Polyester reduces fiber-shedding Felt Bag Styles Steel-ring bags have a galvanized steel ring (stainless steel optional) sewn into the top of the bag. They are supplied with sewn seams standard. Plastic flange bags have a specially-designed flange sewn to the top of the bag. They are supplied with sewn seams standard (fully-welded seams available upon request). Welded Construction Fully-welded bags are available in polypropylene and polyester felt for #1, #2, #3, #4 and #5 plastic flanges. No needle holes, increasing efficiencies by preventing by-pass Elimination of threads further reduces possibility of fibershedding Media Type Media Finish Micron Rating Felt Micron Ratings Materials 1 3 5 10 25 50 75 100 200 Polyester Polypropylene Nomex Teflon PE = Polyester P = Plain (PE, PO) See Chart P1 = 7.06 16.5 S = Galvanized steel H = Handle (Standard on all ring style bags) PO = Polypropylene G = Glazed (PO) See Chart P2 = 7.06 32.0 SS = Stainless steel EB = Edge binding HT = Nomex S = Singed (PE, HT) See Chart P3 = 4.12 8.0 PP = Polypropylene ring A = Auto seams PTFE = Teflon See Chart P4 = 4.12 14.0 T = Titanium TTA = Turn, top stitch, auto seam P5 = 4.12 24.0 P = AJR-P Flange RC = Reverse collar P7 = 5.50 15.0 F = AJR-F Flange SB = Spun bond cover P8 = 5.50 21.0 OSS = AJR-OSS MC = Mesh cover P9 = 5.50 31.0 DS = Draw string P11= 8.50 16.0 NR = No ring P12= 8.50 30.0 RP-1= 8.0 30.0 RP-2= 8.0 40.0 PC-1= 9.0 20.0 PC-2= 9.0 30.0 X2 = 4.35 14.0 XO1= 6.0 22.0 www.tfsi1.com 205
Standard Mesh Liquid Filter Bags Monofilament & Multifilament Micron ratings from 1 to 1500 All industry standard and custom sizes available High flow/low pressure drop media Surface-retention filtration Wide chemical compatibility Sewn construction Handles standard on all bags Choice of steel ring or molded plastic flanges Economical removal of non-deformable contaminants Non-fiber releasing Good removal efficiencies Temperature ratings to 350ºF Polyester and nylon materials meet FDA regulations for contact under CFR21, section 177.1520 Silicone-free construction Mesh Bag Styles Steel-ring bags have a galvanized steel ring (stainless steel optional) sewn into the top of the bag. They are supplied with sewn seams standard. Plastic flange bags have a specially-designed flange sewn to the top of the bag. They are supplied with sewn seams standard (welded collars available upon request). Mesh Bag Materials Multi-lament Mesh media is woven from threads made of smaller fibers. Bags made from this material are low cost and disposable. Mono-lament Mesh is woven from single-fiber threads. The openings are square and uniform. Bags made from this material have excellent strength. Mesh Materials Micro Ratings 1 5 10 25 35 45 50 75 100 125 150 175 200 250 300 400 600 800 1000 1500 NMO = Nylon Monofilament POMO = Polypropylene Monofilament NMU = Nylon Multifilament PEMU = Polyester Multifilament Media Type Micron Rating NMO = Nylon Monofilament See Chart P1 = 7.06 16.5 S = Galvanized steel H = Handle (Standard on all ring style bags) POMO = Polypropylene Monofilament See Chart P2 = 7.06 32.0 SS = Stainless steel EB = Edge binding NMU = Nylon Multifilament See Chart P3 = 4.12 8.0 PP = Polypropylene ring A = Auto seams PEMU = Polyester Multifilament See Chart P4 = 4.12 14.0 T = Titanium TTA = Turn, top stitch, auto seam P5 = 4.12 24.0 P = AJR-P Flange RC = Reverse collar P7 = 5.50 15.0 F = AJR-F Flange P8 = 5.50 21.0 OSS = AJR-OSS P9 = 5.50 31.0 DS = Draw string P11 = 8.50 16.0 NR = No ring P12 = 8.50 30.0 RP-1 = 8.0 30.0 RP-2 = 8.0 40.0 PC-1 = 9.0 20.0 PC-2 = 9.0 30.0 X2 = 4.35 14.0 XO1 = 6.0 22.0 206 www.tfsi1.com
High Efficiency Liquid Filter Bags High Efficiency Microfiber Filter Bags Micron Ratings From 1.0 to 50.0 All Industry Standard and Custom Sizes Available Choice of Metal Ring Tops or Molded Super Seal Tops Wide Chemical Compatibility Excellent Oil Absorbing Capabilities Handles on all bags Efficiencies to 95.0% High Efficiency Bag Materials Microfiber materials provide high efficiencies at low micron ratings. The optional addition of a needle punched felt layer provides a pre-filter zone and results in extended life. This multilayer technology option results in a true graded density material with high performance levels. High Efficiency Bag Styles Standard ring bags have a galvanized steel ring (stainless steel optional) sewn in the top of the bag. They are supplied with sewn seams standard. Molded Super Seal top filter bags have a plastic top sewn to the filter bag. High Efficiency Materials (95.0% Min.) Micron Ratings 1A 2A 5A 10A 25A 50A Polypropylene Polyester Media Type Micron Rating POMF - Polypropylene See Chart P1 = 7.06 16.5 S = Galvanized steel H = Handle (Standard on all ring style bags) PEMF Polyester See Chart P2 = 7.06 32.0 SS = Stainless steel P3 = 4.12 8.0 PP = Polypropylene ring P4 = 4.12 14.0 T = Titanium P5 = 4.12 24.0 P = AJR-P Flange P7 = 5.50 15.0 F = AJR-F Flange P8 = 5.50 21.0 OSS = AJR-OSS P9 = 5.50 31.0 NR = No ring P11 = 8.50 16.0 P12 = 8.50 30.0 RP-1 = 8.0 30.0 RP-2 = 8.0 40.0 PC-1 = 9.0 20.0 PC-2 = 9.0 30.0 X2 = 4.35 14.0 XO1 = 6.0 22.0 www.tfsi1.com 207
Process Liquid Bag Flanges FLANGES 7 D Plastic P1P & P2P 7 D Plastic P1F & P2F P1OSS & P2OSS 4 D Plastic P3P, P4P, P5P 4 D Plastic P3RP, P4RP, P5RP P3OSS & P4OSS 8 D Plastic XO1 Flange RP1P & RP2P 208 www.tfsi1.com
Process Liquid Bag Rings www.tfsi1.com 209