SciTech, sro Praha Ceník Jour Research tisk
|
|
- Dulcie Simmons
- 8 years ago
- Views:
Transcription
1 Ceny bez DPH, balného a poštovného. Jour Research pricelist 08/99 Part Number Description cena CZK Wash-Pro Upgrade Kit 7098, Gas Flow Meter 22932, Silicon Connection Tubing 229, General purpose Adapter 246, Split Vent Adapter 109, Multi-Vac Vacuum Station 35490, Wash-Pro, Single Valve Version 18564, Wash-Pro, Dual Valve Version 24024, Eco-Saver, 220 Volt 22523, C Adapter GB-220AC/12DC 1911, Eco-Saver, 110 Volt 22523, Vac-Cap Degassing Unit 10893, X-Act Degassing System - 4-Channels 58968, X-ACT Degassing System, 3 channels 54054, Double-End Bottle 4095, Double-End Bottle System, External 12149, Double-End Bottle System, Integral 13082, Series Acetal Flange-Free Nut 1/16" 17,00 040black long Flange-Free Nut for dionex 1/16" 26,00 040white long Flange-Free Nut for dionex 1/16" 26, /16" Ferrule, Tefzel 27, Series Acetal Flange-Free Nuts 1/8" 17,00 050black long Flange-Free Nut for dionex 1/8" 26,00 050white long Flange-Free Nut for dionex 1/8" 26, /8" Ferrule, Tefzel 27, Union 49, PEEK Union 164, PEEK Adapt. Waters to female port 792, PEEK Adapt. 1/4"-28 to female port 792, PEEK Adapt. M6 to female port 792, PEEK Adapt to Waters port 792, PEEK Adapt. 1/4"-28 to Waters port 792, PEEK Adapt. M6 to Waters port 792, PEEK Adapt to 1/4"-28 port 792, PEEK Adapt. Waters to 1/4"-28 port 792, PEEK Adapt.M6 to 1/4"-28 port 792, PEEK Adapter / 10/32 to 1/4" , PEEK Adapt to M6 port 792, PEEK Adapt. Waters to M6 port 792, PEEK Adapt.1/4"-28 to M6 port 792, PEEK Adapt to Female Luer 464, PEEK Adapt to Male Luer 464, PEEK Adapt. 1/4"-28 to Female Luer 464, PEEK Adapt. 1/4"-28 to Male Luer 464, PEEK Adapt. M6 to Female Luer 464, PEEK Adapt. M6 to Male Luer 464, /4"-28 Male to 1.00 mm Barbed 792, /4"-28 Male to 1.50 mm Barbed 792, /4"-28 Male to 2.00 mm Barbed 792, /4"-28 Male to 2.50 mm Barbed 792, /4"-28 Male to 3.20 mm Barbed 792,00
2 0634 1/4"-28 Female to 1.00 mm Barbed 792, /4"-28 Female to 1.50 mm Barbed 792, /4"-28 Female to 2.00 mm Barbed 792, /4"-28 Female to 2.50 mm Barbed 792, /4"-28 Female to 3.20 mm Barbed 792, PEEK Union 1/4"-28, thru-hole.020" 229, PEEK Union 1/4"-28, thru-hole.050" 229, Flange-Free Fingertight Fittings Kit 4128, InertSteelT Union, 1/16" 2140, Tefzel tubing 1/16" x ID 0.17 mm 153, Ready Flanged Tefzel Tubing 1/16 x 0.17 mm, Length 10 cm 186, Ready Flanged Tefzel Tubing 1/16 x 0.17 mm, Length 20 cm 197, Ready Flanged Tefzel Tubing 1/16 x 0.17 mm, Length 30 cm 207, Ready Flanged Tefzel Tubing 1/16 x 0.17 mm, Length 50 cm 229, Tefzel tubing 1/16" x ID 0.25 mm 82, Ready Flanged Tefzel Tubing 1/16 x 0.25 mm, Length 10 cm 180, Ready Flanged Tefzel Tubing 1/16 x 0.25 mm, Length 10 cm 186, Ready Flanged Tefzel Tubing 1/16 x 0.25 mm, Length 30 cm 191, Ready Flanged Tefzel Tubing 1/16 x 0.25 mm, Length 50 cm 202, InertSteelT Union, 1/8" 1851, Jour-guard holder 1693, Tefzel tubing 1/16" x ID 0.50 mm 66, Ready Flanged Tefzel Tubing 1/16 x 0.50 mm, Length 10 cm 180, Ready Flanged Tefzel Tubing 1/16 x 0.50 mm, Length 20 cm 186, Ready Flanged Tefzel Tubing 1/16 x 0.50mm, Length 30 cm 191, Ready Flanged Tefzel Tubing 1/16 x 0.50 mm, Length 50 cm 202, Tefzel tubing 1/16" x ID 0.75 mm 66, Tefzel tubing 1/32" x ID 0.25 mm 49, Tefzel tubing 1/16" x ID 1.00 mm 66, Tefzel tubing 1/8" x ID 1.59 mm 186, Tefzel tubing 1.0 x 3.0 mm 131, Tefzel tubing 6.0 x ID 4.0 mm 180, Reduc. Union 1/8" - 1/16" mm 2140, Ti Titanium Frit 76, Ti Titanium Frit 76, Stainless Steel Frits 27, H SS Hastelloy Frit Unidense type 137, Stainless Steel Frits 61, Stainless Steel Frits 27, H SS Hastelloy Frit Unidense type 137, Stainless Steel Frits 27, Stainless Steel Frits 38, Stainless Steel Frits 38, Stainless Steel Frits 38, Stainless Steel Frits 38, Stainless Steel Frits 147, Stainless Steel Frits 147, Stainless Steel Frits 137, S SS Star-Frit, 2µ 55, Level Minder 8190, PEEK Tee w/ Fittings 710, SS Tee / Hole 0.50 mm 1010, PEEK Cross w/ Fittings 1147, SS Cross / Hole 0.50 mm 1229, SS Tee for 1/8" Tubing 1502, PEEK Union kit 470, PEEK Union Kit 1/16", thru-hole.020" 437,00
3 1065 PEEK Union Kit 1/8", thru-hole.050" 437, P PEEK Encased SS Frit, 0.5µ 66, P PEEK Encased SS Frit, 2µ 66, P PEEK Encased SS Frit, 0.5µ 66, P PEEK Encased SS Frit, 2µ 66, P PEEK Encased SS Frit, 0.5µ 66, P PEEK Encased SS Frit, 2µ 66, P PEEK Encased SS Frit, 0.5µ 66, P PEEK Encased SS Frit, 2µ 66, SS Sample Loop, 5µL 857, SS Loop 5µ, for Rheod. Valve # , SS Sample Loop, 10µL 764, SS Loop 10µ, for Rheod. Valve # , SS Sample Loop, 20µL 764, SS Loop 20µ, for Rheod. Valve # , IS InertSteel Loop 20 µl 1665, SS Sample Loop, 50µL 775, SS Loop 50µ, for Rheod. Valve # , IS InertSteel Loop 50 µl 1665, SS Sample Loop, 100µL 775, SS Loop 100µ, for Rheod. Valve # , IS InertSteel Loop 100 µl 1720, Vent. Filter 0.2 µm 49, SS Sample Loop, 200µL 874, SS Loop 200µ, for Rheod. Valve # , IS InertSteel Loop 200 µl 1720, SS Sample Loop, 500µL 928, SS Loop 500µ, for Rheod. Valve # , SS Sample Loop, 1 ml 1037, SS Loop 1mL, for Rheod. Valve # , IS InertSteel Loop 1 ml 1747, SS Sample Loop 2 ml 1256, SS Sample Loop 2 ml for Rh.V , IS InertSteel Loop 2 ml 3631, SS Sample Loop 3 ml 1747, SS Sample Loop 3 ml for Rh.V , SS Sample Loop 4 ml 2239, SS Sample Loop 4 ml for Rh.V , Poro-Web Frit OD 20mm - 2µ 1103, Poro-Web Frit OD 20mm - 5µ 1103, SS Sample Loop 5 ml 2703, SS Sample Loop 5 ml for Rh.V , IS InertSteel Loop 5 ml 8190, IS InertSteel Loop 10 ml 13650, black Flanged Fingertight Nut 1/16" 27, white Flanged Fingertight Nut 1/16" 27, PEEK Flange-Free Fitting, Green 109, PEEK Flange-Free Fitting, Blue 109, PEEK Flange-Free Fitting, Yellow 109, PEEK Flange-Free Fitting, Red 109, PEEK Flange-Free Fitting, Natural 109, PEEK Flange-Free Fitting, Black 109, PEEK Flange-Free Fitting, Natural 109, PEEK Flange-Free Fitting, Yellow 109, PEEK Flange-Free Fitting, Red 109, PEEK Flange-Free Fitting, Blue 109, PEEK Flange-Free Fitting, Green 109,00
4 20129 PEEK Flange-Free Fitting, Black 109, Flanged Fittings Kit 1911, Easy-Flange Clamp 1638, Fixing Screw for Easy-Flange 546, Easy-Flange Disc 328, Easy-Flange Disc w/ Titanium pin 437, Easy-Flange Combi 4641, Easy-Flange Kit w/ plastic case 3767, Easy-Flange Disc 328, Easy-Flange Disc w/ Steel pin 437, Easy-Flange Disc w/ Titanium pin 437, black Flanged Fingertight Nut 1/8" 27, white Flanged Fingertight Nut 1/8" 27, Easy-Flange Disc 344, Easy-Flange Disc 344, O-ring, Polypropylen 1/16" 15, O-ring, Polypropylen 1/8" 15, Flanged Fitting X-Long 1/16" Black 33, Flanged Fitting X-Long 1/8" White 33, Disc, 0.5 mm, for PEEK Tubing 453, PEEK Tee 491, PEEK Cross 928, A Vacuum Tubing 66, PEEK Sample Loop 1 µl 655, PEEK Sample Loop, 2µL 655, PEEK Sample Loop, 3µL 655, PEEK Sample Loop 4 µl 655, PEEK Sample Loop, 5µL 519, PEEK Sample Loop, 20µL 562, PEEK Sample Loop, 10µL 562, PEEK Sample Loop, 40µL 562, PEEK Sample Loop, 50µL 562, PEEK Sample Loop 2 ml 2184, PEEK Sample Loop 2 ml 3822, PEEK Sample Loop 2 ml 1911, PEEK Sample Loop, 100µL 601, PEEK Sample Loop 5 ml 2730, PEEK Sample Loop 5 ml 6552, PEEK Sample Loop 5 ml 2184, PEEK Sample Loop, 200µL 863, PEEK Sample Loop, 500µL 906, PEEK Sample Loop 10 ml 4914, PEEK Sample Loop 10 ml 14196, PEEK Sample Loop 10 ml 14196, PEEK Sample Loop 10 ml 3822, PEEK Sample Loop 20 ml 6552, PEEK Sample Loop 20 ml 5460, PEEK Sample Loop, 1 ml 1201, PEEK Sample Loop, 2 ml 1911, PEEK Sample Loop, 5 ml 2184, PEEK Sample Loop, 10 ml 3822, PEEK Sample Loop 30 ml 10374, PEEK Sample Loop 30 ml 6574, PEEK Sample Loop, 20 ml 5460, PEEK Sample Loop 40 ml 12012, PEEK Sample Loop 40 ml 7688, PEEK Sample Loop 50 ml 14360,00
5 PEEK Sample Loop 50 ml 8802, Column Coupler, Female Type 764, Column Coupler, Waters Type 764, Column Coupler, Male Type 764, Column Coupler, Valco Type 764, Column Coupler, Female to Water Type 764, Slurry Packing Adapter for P/N , Solvent Saver Mod , Solvent Saver with Auto-Clean valve 47502, InertSteelT Tee 1/16" 3565, InertSteelT Tee 1/8" 2850, SS Column, 50 x ID 4.6 mm, 0.5µ frits 1693, SS Column, 50 x ID 4.6 mm, 2µ frits 1693, SS Column, 100 x ID 4.6 mm, 0.5µ frits 1867, SS Column, 100 x ID 4.6 mm, 2µ frits 1867, SS Column, 150 x ID 4.6 mm, 0.5µ frits 2053, SS Column, 150 x ID 4.6 mm, 2µ frits 2053, No-Met Mobile phase filter 310, Polymer replacement filter 26, SS Column, 250 x ID 4.6 mm, 0.5µ frits 2375, SS Column, 250 x ID 4.6 mm, 2µ frits 2375, SS Column, 250 x ID 4.6 mm, 0.5µ frits 2523, SS Column, 250 x ID 4.6 mm, 2µ frits 2523, Slurry Reservoir 7644, Packing Seal 300, Insert 186, SS Column End Fitting 257, Packing Adapter 2894,00 34 ChromBox Kit 7917,00 35 PEEK Starter Kit 5460,00 35 Prep Prep. Starter Kit 22752, Tubing Elbow 90 33, Tubing Elbow , SS Mobile Phase Filter, 10µ, 1/8" 349, SS Mobile Phase Filter, 2µ, 1/8" 349, SS Mobile Phase Filter, 20µ, 1/8" 349, SS Mobile Phase Filter, 10µ, 1/16" 349, SS Mobile Phase Filter, 2µ, 1/16" 349, SS Mobile Phase Filter, 20µ, 1/16" 349, SS Mobile phase filter 2µ 464, SS Mobile phase filter 2µ 764, SS Mobile phase filter 25µ 819, Backpressure Regulator 100 PSI 3549, Backpressure Regulator 300 PSI 3549, Backpressure Regulator 600 PSI 5187, Backpressure Regulator 1500 PSI 5187, PFA Tubing 1/16" x ID 0.50 mm 76, PFA Tubing 1/16" x ID 0.75 mm 76, PFA Tubing 1/8" x ID 1.59 mm 109, Teflon Tubing 1/16" x ID 0.25 mm 33, Ready Flanged Teflon Tubing 1/16 x 0.25 mm, Length 10 cm 180, C Ready Flanged Blue Teflon Tubing 1/16 x 0.25 mm, Length 10 cm 180, Ready Flanged Teflon Tubing 1/16 x 0.25 mm, Length 20 cm 186, C Ready Flanged Blue Teflon Tubing 1/16 x 0.25 mm, Length 20 cm 186, Ready Flanged Teflon Tubing 1/16 x 0.25 mm, Length 30 cm 191, C Ready Flanged Blue Teflon Tubing 191,00
6 1/16 x 0.25 mm, Length 30 cm Ready Flanged Teflon Tubing 1/16 x 0.25 mm, Length 50 cm 202, C Ready Flanged Blue Teflon Tubing 1/16 x 0.25 mm, Length 50 cm 202, c Teflon Tubing 1/16" x 0.25 mm blue 38, Teflon Tubing 1/16" x ID 0.75 mm 33, c Teflon Tubing 1/16" x 0.75mm green 38, Teflon Tubing 1/8" x ID 2.40 mm 52, Teflon Tubing 4.76 x ID 3.76 mm 68, Series Nylon End Stoppers, short 19, Series Nylon End Stoppers 19, PEEK Plug , PEEK Plug, 1/4" , Teflon Tubing 1/16" x ID 0.50 mm 33, Ready Flanged Teflon Tubing 1/16 x 0.50 mm, Length 10 cm 180, C Ready Flanged Orange Teflon Tubing 1/16 x 0.50 mm, Length 10 cm 180, Ready Flanged Teflon Tubing 1/16 x 0.50 mm, Length 20 cm 186, C Ready Flanged Orange Teflon Tubing 1/16 x 0.50 mm, Length 20 cm 186, Ready Flanged Teflon Tubing 1/16 x 0.50 mm, Length 30 cm 191, C Ready Flanged Orange Teflon Tubing 1/16 x 0.50 mm, Length 30 cm 191, Ready Flanged Teflon Tubing 1/16 x 0.50 mm, Length 50 cm 202, C Ready Flanged Orange Teflon Tubing 1/16 x 0.50 mm, Length 50 cm 202, c Teflon Tubing 1/16" x 0.50mm orange 38,00 43 Slurry Reservoir for 20 mm ID Columns Light version 24297,00 44 Slurry Reservoir for 20 mm ID Columns heavy version 81627,00 45 Packing Adapter 1360, SS Prep. Column OD 1" x ID 20 mm 7098, SS Prep. Column OD 1" x ID 20 mm 10374, SS Prep. Column OD 1" x ID 20 mm 7371, SS Prep. Column OD 1" x ID 20 mm 7644, SS Prep. Column OD 1" x ID 20 mm 8190, SS Prep. Column OD 1" x ID 20 mm 6552, SS Prep. Column OD 1" x ID 20 mm 8736, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179,00
7 45824 PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398,00
8 45887 PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239, PEEK Telephone Cable 928, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1179, PEEK Telephone Cable 1398, PEEK Telephone Cable 1638, PEEK Telephone Cable 2129, PEEK Telephone Cable 2184, PEEK Telephone Cable 2239,00 46 SS Replacement Filter 240, Fuse 2A, 250V, 5x20 mm 71, Mobile phase filter / 10µ 251, Mobile phase filter / 2µ 251, Mobile phase filter / 10µ 295, Mobile phase filter / 2µ 295,00 47 SS Adapter 1" 1360,00 48 SS Guard Column 1693,00 49 SS End Piece 1" 1168, PEEK Cone Ferrule - Solid 60, KEL-F Ferrule, 1/16" 27, PEEK Single Ferrule 60, PEEK Double Ferrule 66, PEEK Special Ferrule 66, PEEK Single Ferrule 1/8" 27,00 51 Packing Seal 246,00 52 Sparging Relief Kit 2293,00 53 O-ring 246,00 54 SS Plate 819, PVDF Fingertight Fitting 96, PEEK Fingertight Fitting 153, PEEK Fingertight Fitting, Natural 120, PEEK Fingertight Fitting, Black 120, PEEK Fingertight Fitting, Red 120, PEEK Fingertight Fitting, Yellow 120, PEEK Fingertight Fitting, Blue 120, PEEK Fingertight Fitting, Green 120, Universal Fingertight Nut 164, PEEK Fingertight Fitting, Short Head 153, PEEK Adapter / M6 to , PEEK One-Piece Fingertight X-Long 153, PEEK Hex-Head Nut, Long 138, PEEK Hex-Head Nut, short 138, PEEK Wrenchtight Fitting, Natural 93, PEEK Wrenchtight Fitting, Red 93, PEEK Wrenchtight Fitting, Yellow 93, PEEK Wrenchtight Fitting, Blue 93, PEEK Wrenchtight Fitting, Green 93, PEEK Wrenchtight Fitting, Black 93, Acetal Two-Piece Fingertight Nut 69, SS Fingertight Fitting 130, PEEK Two-Piece Fingertight 121, PEEK Two-Piece Fingertight 124, PEEK Adapter / M6 to ,00
9 56 SS Nut 82, Tungsten Carbide Glass Knife 1239, Tungsten Carbide Repl. Blade 519, SS Filter 10µ / Sparger 10µ 410, SS Filter 2µ / Sparger 10µ 410, PE Filter 20µ / Sparger 20µ 410,00 57 SS Nut / Long 82,00 58 SS Nut / X- Long 115,00 59 SS Ferrule 55, PEEK Tubing 2.10 x ID 0.75 mm 410, PEEK Tubing 1/16" x ID 0.13 mm 164, PEEK Tubing 1/16" x ID 0.17 mm 164, PEEK Tubing 1/16" x ID 0.25 mm 164, PEEK Tubing 1/16" x ID 0.50 mm 164, PEEK Tubing 1/16" x ID 0.75 mm 164, PEEK Tubing 1/16" x ID 1.00 mm 164, PEEK Tubing 1/16" x ID 1.40 mm 164, PEEK Tubing 1/8" x ID 1.6 mm 601, PEEK Tubing 1/8" x ID 0.75 mm 601, PEEK Tubing 1/8" x ID 2.00 mm 410, PEEK Tubing 6.35 x ID 3.20 mm 1529, PEEK Tubing 1/16" x ID 0.13 mm 164, PEEK Tubing 1/16" x ID 0.17 mm 164, PEEK Tubing 1/16" x ID 0.25 mm 164, PEEK Tubing 1/16" x ID 0.50 mm 164, PEEK Tubing 1/16" x ID 0.75 mm 164, PEEK Tubing 1.80 x ID 0.25 mm 164, PEEK Tubing 1.80 x ID 0.50 mm 164, PEEK Tubing 1.80 x ID 0.75 mm 164, PEEK Tee, Low Pressure w/ fittings 901, PEEK Tee, Low Pressure w/ fittings 901, PEEK Tee, Low Pressure 819, PEEK Tee, Low Pressure 819, PEEK Cross, Low Pressure 983, PEEK Cross, Low Pressure 983, PEEK Cross, Low Pressure 874, PEEK Cross, Low Pressure 874,00 61 Distributor plate for 1/4" column 76, Replacement Recycle Valve (2907) 7644, Solid Bottle Cap 82, SolviFlex - Customer to fit own cap! 901, SolviFlex - GL-45 Cap 956, SolviFlex - S40 Cap 956, SolviFlex - Jour to fit Custmers cap! 928, No-Ox tubing 3.2 x ID 1.50 mm 382, No-Ox fittings kit 355, µm Filter for -97 Flowm, 1/8" - 2 pcs 1365, µm Filter for -97 Flowm, 1/8" - 2 pcs 1365, KEL-F Insert ferrule 68, Bottle 4 l. / with Cap 1512, Bottle 2 l. / with Cap 1070, Bottle 1 l. / with Cap 956,00 62 Distributor plate for 3/8" column 87, SS Tubing 0.79 mm x ID 0.18 mm, Chromatography grade 137, SS Tubing 1/16" x ID 0.13 mm, Chromatography grade 191, SS Tubing 1/16" x ID 0.17 mm, Chromatography grade 175, SS Tubing 1/16" x ID 0.25 mm, Chromatography grade 175,00
10 InertSteelT 1/16" x ID 0.25 mm 704, SS Tubing 1/16" x ID 0.50 mm, Chromatography grade 169, InertSteelT 1/16" x ID 0.50 mm 704, SS Tubing 1/16" x ID 0.75 mm, Chromatography grade 137, InertSteelT 1/16" x ID 0.75 mm 704, SS Tubing 1/16" x ID 1.0 mm, Chromatography grade 120, InertSteelT 1/16" x ID 1.00 mm 1087, SS Tubing 3.2 mm x ID 2.1 mm, Chromatography grade 104, InertSteelT 1/8" x ID 2.00 mm 835, SS Tubing 6.35 mm x ID 4.65 mm, Chromatography grade 404,00 63 Distributor plate for 1/2" column 109, SS Tubing 8.00 mm x 2.00 mm Chromatograpy Grade 1556,00 64 Distributor plate for 1" column 191, PEEK Column ID 2.1 / L 30 mm 2206, PEEK Column ID 2.1 / L 50 mm 2348, PEEK Column ID 2.1 / L 100 mm 2675, PEEK Column ID 2.1 / L 150 mm 3003, PEEK Column ID 2.1 / L 250 mm 3740, PEEK Column ID 2.1 / L 300 mm 4095, PAT Frit w/ PEEK Ring / 5µ 164, PEEK End Fitting 710, Packing Seal (2.1 mm) 44, Packing Adapter (2.1 mm) 1092, PEEK End Fitting 519, Packing Adapter for 4.6 mm ID col. 1911, Packing seal 82, PEEK Column ID 4.6 / L 30 mm 2020, PEEK Column ID 4.6 / L 50 mm 2102, PEEK Column ID 4.6 / L 100 mm 2386, PEEK Column ID 4.6 / L 150 mm 2566, PEEK Column ID 4.6 / L 250 mm 2932, PEEK Column ID 4.6 / L 300 mm 3118, PEEK Column ID 4.6 / L 125 mm 2473, /16" SS Plug thread 415, PEEK End Fitting 759, PAT frit w/ PEEK ring / 5µ 382, PEEK Frit Spacer 191, PEEK Column ID 7.5 / L 50 mm 2386, PEEK Column ID 7.5 / L 100 mm 2752, PEEK Column ID 7.5 / L 150 mm 2932, PEEK Column ID 7.5 / L 250 mm 3833, Packing Adapter for 7.5 mm ID col. 2927, Packing seal 60, PEEK Column ID 7.5 / L 300 mm 4215, PEEK Column ID 7.5 / L 75 mm 2566, /8" SS Plug - 5/16"-24 thread 415, Teflon tubing 1/8" x ID 1.60 mm 71, Teflon tubing 2.0 x ID 1.70 mm 33, FEP Tubing 1/16" x ID 0.50 mm 49, FEP Tubing 1/16" x ID 0.80 mm 49, FEP Tubing 1/8" x ID 1.59 mm 109, Teflon Tubing 1/16" x ID 0.17 mm 33, Ready Flanged Teflon Tubing 1/16 x 0.17 mm, Length 10 cm 186, Ready Flanged Teflon Tubing 1/16 x 0.17 mm, Length 20 cm 197, Ready Flanged Teflon Tubing 1/16 x 0.17 mm, Length 30 cm 207, Ready Flanged Teflon Tubing 1/16 x 0.17 mm, Length 50 cm 229, FEP Tubing 1/16" x ID 1.00 mm 44,00
11 6807 Teflon Tubing 1/16" x ID 1.0 mm 33, Teflon Tubing Black 1/16" x ID 0.25 mm 55, /16 x 0.25 mm, Length 10 cm 180, /16 x 0.25 mm, Length 20 cm 186, /16 x 0.25 mm, Length 30 cm 191, /16 x 0.25 mm, Length 50 cm 202, FEP Tubing 6.35 x ID 4.35 mm 164, Teflon tubing 6.35 x ID 4.75 mm 191, Teflon Tubing 1/16 x ID 0.50 mm 55, /16 x 0.50 mm, Length 10 cm 180, /16 x 0.50 mm, Length 20 cm 186, /16 x 0.50 mm, Length 30 cm 191, /16 x 0.50 mm, Length 50 cm 202, FEP Tubing 1/16" x ID 0.25 mm 49, PAT frit w/ PEEK ring / 5µ 175, PEEK Column 50 mm x 4.0 mm 2102, PEEK Column 100 mm x 4.0 mm 2386, PEEK Column 125 mm x 4.0 mm 2473, PEEK Column 150 mm x 4.0 mm 2566, PEEK Column 250 mm x 4.0 mm 2932, PEEK Column 300 mm x 4.0 mm 3118, Repl. Guard Cartridge, 5 µ PAT 415, SS In-Line Filter 1.30 mm thru-hole 1147, SS Pre-Column Filter 0.50 mm thru-hole 1147, PEEK In-Line Filter Kit 1201, PEEK In-Line Filter Kit - 10 µm 1201, In-Line Guard Column 1376, /8" SS Nut - 5/16"-24 thread 153, Teflon Ferrule, 1/16" 14, Jour Guard Cartridge / C18, 3 pcs. 3030, PEEK Jour-Guard C18, 3 pcs. 3030, Jour Guard Cartridge / C8, 3 pcs. 3030, PEEK Jour-Guard C8, 3 pcs. 3030, Jour Guard Cartridge/ Phenyl, 3pcs. 3030, PEEK Jour-Guard Phenyl, 3 pcs. 3030, Jour Guard Cartridge / Silica, 3 pcs. 3030, PEEK Jour-Guard Silica, 3 pcs. 3030,00 70 SS Ferrule 1/8" 153,00 74 Waters Adapter 164, µ PEEK Loop for Valco Valves 562, µ PEEK Loop for Valco Valves 601, ml PEEK Loop for Valco Valves 1201, µ PEEK Loop for Valco Valves 562, µ PEEK Loop for Valco Valves 885, µ PEEK Loop for Valco Valves 519, µ PEEK Loop for Valco Valves 562, µ PEEK Loop for Valco Valves 906, µ SS Loop for Valco Valves 764, µ SS Loop for Valco Valves 775, ml SS Loop for Valco Valves 1037, µ SS Loop for Valco Valves 764, SS Sample Loop 2 ml 1256, µ SS Loop for Valco Valves 895,00
12 SS Sample Loop 3 ml 1747, SS Sample Loop 4 ml 2239, µ SS Loop for Valco Valves 857, µ SS Loop for Valco Valves 775, µ SS Loop for Valco Valves 928, SS Sample Loop 5 ml 2703, Tubing Cutter 1529, Replacement Cutter Wheel 268, Guillotine Cutter 138, Replacement Blade (Guillotine cut.) 69, Tubing Pliers 519, Clean-Cut Tubing Cutter 393, Clean-Cut Replacement Blade 33, Rheotool 601, Modified Bottle Cap 1 & 2 l 491, Modified Bottle Cap 4 l 830, Modified Bottle Cap 1 & 2 l 524, Press. Equalization Union 601, Titanium tubing 1/16" x ID 0.25 mm, Chromatography grade 1392, Opti-CapT 683, Opti-CapT Kit 1441, Opti-Cap Kit with 1 L Bottle 1775, Opti-Cap Kit with 2 L Bottle 2239, Safety-Coated Glass Bottle/Cap 1 L 737, BioBottle Kit 1 L 1884, L Safety-Coated Glass Bottle, GL , BioBottle Kit 2 L 2785, Cap Insert for 4 L HDPE Bottles 3800, Bottle Kit 4 l 8190, Cap Insert for 1 & 2 l HDPE Bottles 3473, Bottle Kit 2 l 7371, Manifold without Pop-Off 3909, Pressure Regulator 5PSI 2129, Bottle Kit 1 l 6825, Cap Insert for 1 & 2 l Glass Bottles 2703, HDPE-Bottle 2 l Solid Cap 8070, Coated Bottle Kit 1 l 6006, Coated Bottle Kit 2 l 6825, Pop-Off Valve 8 PSI 1529, Manifold Assembly 5777, Manifold Kit 8 PSI 9435, LastDrop Mobile phase filter/ss/2µ 890, LastDrop Mob. phase filter/ss/10µ 890, LastDrop Mob. phase filter/pat/10µ 956, LastDrop Mob. phase filter /PAT/2µ 1256, LastDrop Mob. phase filter/pat/5µ 1108, PEEK In-Line Filter 2µ 710, In-Line Filter Assy. / 1/16", 2µ 956, In-Line Filter Assy. / 1/8", 2µ 956, PEEK In-Line Filter 10µ 710, In-Line Filter Assy. / 1/16", 10µ 956, In-Line Filter Assy. / 1/8", 10µ 956, Anti-Backflow Check Valve 1529, PEEK Mixing Tee w/ Fittings 2129, PopCap only - With Tubing 7644, Sparge Control Cap Only - With Tubing 5187, PopCap Kit, 1 L 9555,00
13 PopCap Kit 2 L 10374, Sparge Control Kit 1 L 7371, Sparge Control Kit 2 L 8463, Auto-Clean Accessory Kit 10374, Replacement Wash Valve for , X-Act Upgrade Kit 8736, Tubing Clip 52, SS Precut tubing ID 0.13 x L 40 mm 71, SS Precut tubing ID 0.13 x L 50 mm 71, SS Precut tubing ID 0.13 x L 100 mm 87, SS Precut tubing ID 0.13 x L 200 mm 109, SS Precut tubing ID 0.13 x L 300 mm 191, SS Precut tubing ID 0.18 x L 50 mm 60, SS Precut tubing ID 0.18 x L 100 mm 98, SS Precut tubing ID 0.18 x L 200 mm 137, SS Precut tubing ID 0.18 x L 300 mm 164, SS Precut tubing ID 0.25 x L 50 mm 60, SS Precut tubing ID 0.25 x L 100 mm 87, SS Precut tubing ID 0.25 x L 200 mm 109, SS Precut tubing ID 0.25 x L 300 mm 164, SS Precut tubing ID 0.50 x L 50 mm 60, SS Precut tubing ID 0.50 x L 100 mm 87, SS Precut tubing ID 0.50 x L 200 mm 137, SS Precut tubing ID 0.50 x L 300 mm 164, SS Precut tubing ID 0.75 x L 50 mm 60, SS Precut tubing ID 0.75 x L 100 mm 82, SS Precut tubing ID 0.75 x L 200 mm 120, SS Precut tubing ID 0.75 x L 300 mm 142, Peek precut kit mm 819, Peek precut kit mm 819, Peek precut kit mm 819, Peek precut kit mm 819, Peek precut kit mm 819, Peek precut super kit 3822,00 CE SS End Fitting/0.5µ Frit 382,00 CE14-2 SS End Fitting/2µ Frit 382,00 CE14-5 SS End Fitting/5µ Frit 382,00 ZDV025 SS Union thru-hole 0.25 mm - 1/4" ,00 ZDV025U SS Union thru-hole 0.25 mm ,00 ZDV050 SS Union thru-hole 0.50 mm - 1/4" ,00 ZDV050U SS Union thru-hole 0.50 mm ,00 ZDV080 SS Union thru-hole 0.80mm - 1/4" ,00 ZDV080U SS Union thru-hole 0.80 mm ,00 ZDV20 SS Union for 1/8' OD Tubing 846,00 ZRU21 SS Reducing Union 1/8" to 1/16" 1010,00
Flow Solution Parts & Accessories
Flow Solution Parts & Accessories Assemblies Part # Instrument U/M Price Debubbler Debubbler, Acrylic A000172 All ea $140.00 Distillation Coil Heater Spool A515017 FS III/IV ea $495.00 Digestion Coil UV
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationTubing. PEEK Tubing. Spiral-Link PEEK Tubing. Fused Silica Tubing
PEEK Tubing PEEK tubing can be used with either SS nuts and ferrules, flangeless fittings, or any universal fingertight fittings. This tubing is extremely flexible and can be cut to your desired length
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationALTRA 400 Operator Manual. Planographs and Wiring Diagrams
Planographs and Wiring Diagrams 16 Altra 400 Final Assembly All Altras w/head # Part # Description Specific Use (if any) 1 60323A Tank Assy, Altra 400 115 Volt model 60358A Tank Assy, Altra 400 SP 230
More informationWHATMAN ÜRÜN LİSTESİ 1 / 53 KATALOG NO AMBALAJ ŞEKLİ. Labsciences
Labsciences Sterivent 36, 0.2μm Inlet - 3/8 to 1/2 inch Stepped Hosebarb Outlet- 3/8 to 1/2 inch Stepped Hosebarb 1/pk 1/pk 2103 Sterivent 150, 0.2μm Inlet -3/8-1/2" Stepped Hosebarb Outlet- 3/8-1/2" Stepped
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationKELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationGas Chromatograph GC Consumables. p/n: 220-94898-02
Gas Chromatograph GC Consumables p/n: 220-94898-02 Diag. # 1) Septum Nut 2) Needle Guide 3) Septum 4) Injection Port A Assy 5) O-ring for Glass Insert 6) Glass Insert 7) Gold Gasket 8) Capillary Adaptor
More informationOVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless)
OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 3 05 Litho In U.S.A. (cre) 1 Part No. Rev.A OVEN PARTS 1 Literature Parts 4455994 Installation Instructions Use & Care Guide 8300346 Microwave
More informationGEBCO (PTY) LTD - Netafim Product List - 1st August 2011
AQUANET PLUS & ITEC CONTROLLERS Globe - Solenoid, Manual Override and Mechanical Throttle Aquanet Valve - DC 20 mm BSP Valve (Solenoid Valve) 34500-001000 Aquanet Valve - DC 25 mm BSP Valve (Solenoid Valve)
More informationHG600/HG800. Hydro-Power Unit. Installation and Operation Guide
HG600/HG800 Hydro-Power Unit Installation and Operation Guide Copyright 04 HydroSpin, All rights reserved. The data contained in this document is proprietary to HydroSpin. It is disclosed to the receiving
More informationA&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS
A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.
More informationPLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationFILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationSpare Parts Program. Parts, Consumables & Accessories. 800.837.9711 superproductsllc.com
Spare Parts Program Parts, Consumables & Accessories TABLE OF CONTENTS Program Introduction 3 Body 4 5 Boom 5 6 Hydraulic 6 Lights & Accessories 7 Tubes, Nozzles & Hose Fittings 8 11 Vacuum 11 Water 12
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationConsumable Parts Catalogue Ver.3.06
Consumable Parts Catalogue Ver.3.06 February, 2012 This catalogue contains consumable parts for ; Pyrolyzer (EGA/PY-3030D, PY-3030S, PY-2020iD/iS) Selective Sampler (SS-1010E) MicroJet Cryo-Trap (MJT-1030Ex)
More informationMODEL 9000. Service Manual. IMPORTANT: Fill in pertinent information on page 2 for future reference.
MODEL 9000 Service Manual IMPORTANT: Fill in pertinent information on page for future reference. Job Specification Sheet * JOB NO. * MODEL NO. * WATER TEST * CAPACITY PER UNIT MAX. PER REGENERATION * MINERAL
More informationRheodyne Manual Sample Injector Valves
Rheodyne Manual Sample Injector Valves Rotor Seal Shaft End Rotor Seal Groove Stator Face Stator Stator Face Seal Rotor Seal Grooves Position A Rotor Seal Grooves Position B Position C Flow paths showing
More informationMultipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
More informationHome. News. Products. Contact Us. Treated Swagelok Fittings--for better inertness!
New GC Accessories New GC Accessories New GC Accessories Fittings: Swagelok : Home Brass & Stainless Steel News Also available: Products Silco Fittings : Siltek & Sulfinert Also available: Info & Support
More informationHow To Replace A Reverse Osmosis Water Tank
ALL MODELS REVERSE OSMOSIS WITH NONAIRGAP FAUCET 1. Read all instructions carefully before starting installation. 2. Find the cold water line beneath your sink. The cold water is typically on the right.
More informationGYROLOK to Tube Union
GYROLOK HOKE manufactured GYROLOK tube fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities. GYROLOK to Tube Union MANUFACTURED
More informationMaintaining Your Agilent 1100 Series HPLC System. Optimize performance and maximize efficiency in your lab. Learn essential HPLC maintenance tips
Learn essential HPLC maintenance tips Ensure trouble-free operation of your lab Select the ultimate PerfectFit HPLC supplies Maintaining Your Agilent 1100 Series HPLC System Optimize performance and maximize
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationRICAMBI FLECK WATERBOOK 2006-2007 - LISTINO GENERALE
RICAMBI FLECK P/N 0 O'ring 560 CD 0 P/N 050 Grommet pass rod 20 2300/230/ 2350 P/N 060 Tube 3/8in (0,92 m) 0 P/N 086 Holding Nut M5 2300 0 P/N 0209-0 Quad Ring 560 CD 0 P/N 028 Microswitch 5 P/N 0220 Screw
More informationWaters Corporation. Waters 2690/5 USER & TROUBLESHOOTING GUIDE
Waters Corporation Waters 2690/5 USER & TROUBLESHOOTING GUIDE Contents 2690/5 Theory Setup procedures. Troubleshooting the 2690/5 User maintenance of the 2690/5 Spare Parts 2 2690/5 Theory 2690/5 Solvent
More informationÄKTA system Training Guide
ÄKTA system Training Guide Explorer 00 / 0 amersham bioscience amersham bioscience amersham bioscience amersham bioscience ÄKTAexplorer ÄKTAexplorer Buffers Injector Box amersham bioscience Monitor Conductivity
More informationOVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel)
OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 7 03 Litho In U.S.A. (cre) 1 Part No. OVEN PARTS NOTE: The screws and nuts required to attach a part are listed immediately following that part.
More informationReplacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS
Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The
More information7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
More informationUFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
More informationPRESSURE FILTRATION 800-334-7132
Introduction Stainless Steel Syringe Holders Stainless Steel Gas Line Holders High Pressure Stainless Steel Holder Polypropylene In-Line Holders PFA In-Line Holders Sanitary In-Line Stainless Steel Holders
More informationChapter 28: High-Performance Liquid Chromatography (HPLC)
Chapter 28: High-Performance Liquid Chromatography (HPLC) Scope Instrumentation eluants, injectors, columns Modes of HPLC Partition chromatography Adsorption chromatography Ion chromatography Size exclusion
More informationMaintaining Your Agilent LC and LC/MS Systems. Our measure is your success.
Maintaining Your Agilent LC and LC/MS Systems Our measure is your success. Table of Contents Manual Injection Valve Maintenance...3 Agilent Injection Valves from Rheodyne...4 Sample Loops...7 Syringes
More informationRepair Parts/Beacon Medaes/Area Line Pressure Alarm
Repair Parts/Beacon Medaes/Area Line Pressure Alarm Description Part Number Module Gauge Assembly Part Number 1. Front Panel #0221-6804-100 2. PC Board, Control/Display #0631-5010-700 3. Screw, 6-32 x
More informationMDT5N25 & MTD5N40 SERVICE PARTS
MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts
More information14. Tools and Software
14. Tools and Software System overview: Geberit welding machine MEDIA 160 and tools... 364 System overview: Geberit welding machine UNIVERSAL 315 and tools... 365 14.1 Tools for Geberit Silent-db20 / Geberit
More informationNewloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists
Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant
More informationPower Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationwith installation dynafact boost GAUGE this manual is for use with systems 64050-64054
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact
More information2700 DUST CONTROL MACHINE:
700 DUST CONTROL MACHINE: 30016 PAGE 1 700 DUST CONTROL MACHINE: 30016 11 17 9 15 8 16 10 1 13 7 6 1 1 30 OLD STYLE BATERY BOX 8 3 5 3 7 0 18 19 31 3 9 5 1 FACTORY INSTALLED OPTIONS: 30011 ELECTRIC CLUTCH
More informationInnovative vs Traditional
And in the red corner, introducing the challenger NASDAQ April 4 2011 243.47 $ 1.38 $ 0.58 % 0.07 $ 0.02 $ 39.4 % Technology DVD Digital Streamline Instant Play Internet Access Unlimited Selection No Late
More informationTECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS
TECHNICAL GUIDE For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING ORDERING INFORMATION
More informationTools. Acid Brushes. Utility Brushes. Brushes For Cleaning Copper Fittings. Brushes For Cleaning Copper Tubing G113 10/06/11
10/06/11 Acid Brushes G113 Manufactured with electrolyte tin plate and filled with 100% pure stiff black horse hair which is firmly crimped to eliminate bristle "fall out" Use with acid, flux and pipe
More informationHAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationAir Vantage 500 Kubota
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-625 P-625 RETURN TO MAIN INDEX PARTS LIST FOR Air Vantage 500 Kubota P-625-A
More informationHigh Flow Air Cleaner Assembly
34-0112 High Flow Air Cleaner Assembly 34-0114 34-1128 34-0113 34-0105 34-0178 Big Sucker Air Filter Kits for Carbureted or Fuel Injected Twin Cam and EV2 Big Twin Models. The all-in-one backing plate
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationSAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
More informationSTX ELECTRIC TOURING MODEL CAR 1:10SCALE STX-001 SOLID AXLE PULLEY ECCENTRIC CLAMP FRONT RIGHT - REAR LEFT ST03002-1
STX STX-001 ELECTRIC TOURING MODEL CAR 1:10SCALE ST03001 SOLID AXLE PULLEY ST03001-1 SOLID AXLE KIT ST03002-1 ECCENTRIC CLAMP FRONT RIGHT - REAR LEFT ST03002-2 ECCENTRIC CLAMP FRONT LEFT - REAR RIGHT ST03003
More informationInstalling a Probe. Typical Installation
for hazardous locations. Prior to any installation in a Classified Hazardous Location, verify installation methods by the Control Drawing referenced on the product s name tag 2. The Feed Through Assembly
More informationModel 5600SE Downflow
Service Manual IMPORTANT: Fill in pertinent information on page 3 for future reference. Table of Contents Job Specification Sheet...................................................................................
More information1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
More informationGROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
More informationMACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
More informationAprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationInstallation Instructions 4508 4508S
SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect
More informationYour Best Choice For Laboratory Consumables
Your Best Choice For Laboratory Consumables ISO9001:2008 Certificate No. 34730 Report No.01893 Registration No. 10035061 Wuxi NEST Biotechnology., LTD Headquarters Add: No 230, Xida Road, New District,
More informationHT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
More informationPOWER WAVE 455M/STT & (CE)
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-450 P-450 PARTS LIST FOR POWER WAVE 455M/STT & (CE) P-450-A P-450-A ILLUSTRATION
More informationSyringes 5. Contents. Autosampler 6. MEPS 18 Product Data 18 Part Numbers 19. Manual 20. Guided Plunger 24 Product Data 24 Part Numbers 25
Syringes Injection Port Contents Syringes 5 Autosampler 6 Diamond Headspace 6 Product Data 6 Part Numbers 7 Diamond MS 8 Product Data 8 Part Numbers 9 GC Autosampler 11 Product Data 11 Part Numbers 12
More informationPROFESSIONAL PRODUCTS- PET NAIL GROOMERS
- S SERVICE NUMBER 29-0A/-0B 29-0E 29-0F 29-0H 29-0J 29-0K 29-0 To select the model desired, click on the highlighted service number. D-5 S LIST NEW MODEL(S) ADDED FIRST ISSUE 6/76, COLUMN # FIRST ISSUE
More informationSCRUBTEC 545E-553E. Model: SCRUBTEC 545 ALT SCRUBTEC 553 E ALT. Stykliste Dansk
Model: SCRUBTEC 545 ALT SCRUBTEC 553 E ALT Stykliste Dansk Indholdsfortegnelse General wiev 3 Opløsningstank 5 GENINDVINDINGSTANK 7 Chassis tank 9 Wheel system - Handle assembly 11 OPLØSNINGSSYSTEM 13
More informationCatalogo ricambi per LA UNO
Catalogo ricambi per Spare parts catalogue for REV. 00--03-0UK Uffici e stabilimento / Office and factory: ZOLA PREDOSA (Bo) Italy - Via Morazzo, Tel. 05-75.56.6 (4 linee r.a.) - Fax 05-75.59.4 E-mail:
More informationMicro GC Fusion Pre-Installation Checklist
Site Preparation Proper site preparation prior to installing is very important. Contact INFICON (www.inficon.com) with any questions regarding site preparation. NOTE: Checkboxes ( ) identify hardware that
More informationCOMMERCIAL GAS DRYER
COMMERCIAL GAS DRYER MODELS CGD8990XW0 4 12 Litho In U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. Rev. B TOP AND CONSOLE PARTS 2 TOP AND CONSOLE PARTS 1 Literature Parts W10184516 Installation
More informationAccessories. Fittings 2. Products assembly 4. Tube Spike 3/5 mm 8 T.N.L. 9. Vacuum Breaker 10. Line Flush Valve 11. Pressure Indicator 12
Accessories For irrigation systems Version 1.0 Fittings 2 Products assembly 4 Tube Spike 3/5 mm 8 T.N.L. 9 Vacuum Breaker 10 Line Flush Valve 11 Pressure Indicator 12 Fittings Manifold 8 outlets To distribute
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationWiper Motor Marinco 2.5. Installation Instructions
Wiper Motor Marinco 2.5 Installation Instructions Wiper Motor Marinco-2.5 The Marinco 2.5 Wiper Motor Offers the Following Features: Fully sealed base and housing which allows installation in outdoor wet
More information8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationHigh Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
More informationFreka. Enteral Feeding Tube Product Range ENTERAL NUTRITION
ENTERAL NUTRITION Freka Enteral Feeding Tube Product Range Fresenius Kabi Limited, Cestrian Court, Eastgate Way, Runcorn, Cheshire WA7 1NT tel: 01928 533533 fax: 01928 533520 email: nutrition.service@fresenius-kabi.com
More informationP900 SERIES PORTABLE HYDROSTATIC TESTER
P900 SERIES PORTABLE HYDROSTATIC TESTER MODELMODEL P900-SM ( STANDARD MODEL) SHOWN IN PHOTO coated square tubular frame on wheels for easy transport. PANEL MOUNTED CONTROLS: 4 dial gauges, pump regulator
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationBefore installation it is important to know what parts you have and what the capabilities of these parts are.
INSTALLATION GUIDE Before installation it is important to know what parts you have and what the capabilities of these parts are. The Recon XZT is the smallest and most powerful gauge of its kind. With
More informationKEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing
KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationPROTECH ELECTRICAL CONNECTORS AND CABLE TIES
INDEX ALLIGATOR CLIPS... 7-7 compressor lead sets... 7-7 CONNECTORS BUTT... 7-3 closed... 7-3 ELECTRICAL... 7-2 terminal adapters... 7-2 QUICK CONNECTS... 7-5 7-6 TWIST-ON WIRE... 7-2 HEAT SHRINK TUBING
More informationOVEN PARTS For Models:RBS305PDB16, RBS305PDQ16, RBS305PDT16, RBS305PDS16 (Black) (Designer White) (Biscuit) (S.Steel)
OVEN PARTS 30" BUILT IN ELECTRIC OVEN SELF CLEAN 10 04 Litho in U.S.A.(cre) 1 Part No. OVEN PARTS 1 Literature Parts LIT8300654 Installation Instructions LIT8300772 Use & Care Guide (Oven) LIT8301758 Tech
More informationCHROME FRONT BRAKE MASTER CYLINDER KIT
-J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder
More information2178-S Fiber Optic Splice Case
2178-S Fiber Optic Splice Case Instructions March 1998 34-7041-6288-1-B 1 2 Table of Contents 3M 2178-S Splice Case Description... 4 1.0 General...4 2.0 Specifications...4 3.0 Kit Contents...5 3M 2178-S
More informationCataLoG No. weight o.d. i.d. GLaSSwaRe
Lead weights with Vikem Vinyl Coating Protect and Stabilize Expensive Glassware Stabilizes vessels in water baths and on benchtops Added insurance against tipping and possible chemical spills Closed ring
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationDR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
More informationInstallation Instructions 6028.801
DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American
More information