Smeg sinks and taps, Quality design aesthetics Smeg sinks and taps are high quality products with captivating design and aesthetics. The collection constitutes a number of design orientated and functional sinks that will make an eye-catching style statement in any kitchen.
stylish sinks and taps for every home Smeg have a large range of stainless steel sinks with outstanding quality and superb style. The drainers are considered a design feature, with a number of different solutions that make Smeg sinks quite unmistakeable. A new spectrum of choices - Quadra, Stilla, Alba and Rigae - are available to suit your kitchen. quadra stilla alba rigae The majority of Smeg sinks are in high quality 18/10 st/steel, with a substantial thickness resulting in a long working life. Finishes include, brushed: a brilliant effect that keeps its good looks and a finger friendly scratch resistant fabric finish. Installation options The large range of models offers a selection of installation choices in a variety of widths with co-ordinating accessories and taps. inset undermount Extra deep bowls Extra deep sinks offer a greater capacity and versatility. The majority of Smeg sinks are 210mm deep, approximately 40% deeper than most other sinks on the market. Inset, low profile and undermounted styles with curved or squared corners, and single, double or triple bowl options, with or without drainer, all of them easy to install. The perfect sink, tap and accessory for every kitchen To complement the Linea cooking range Smeg offer a sink with matching glass boards that combine practicality with good looks as on the reverse they have a highly durable stainless steel finish for a practical working surface. No detail is too much with the neat stainless steel cover for the strainer waste ensuring that a fluid line is maintained even in the bottom of the sink. Practical accessories for versatile sinks To make the best possible use of the available surface area, Smeg produces stainless steel drainer baskets and hard-wood chopping boards that fit perfectly over the sink. Some models also have a colander that slides into place when in use. Coordinating taps Smeg offers various types of mixer taps, different designs, functions and finishes. You can choose from models with a brushed steel or chrome-plated finish, with extractable spout or built in water filters. 185
lqr116-2 "Quadra" double bowl, single drainer ultra low profile inset sink lqr862-2 "Quadra" double bowl ultra low profile inset sink Bowl depth: 218mm Bowl widths: 2 x 350mm Pop up waste Bowl depth: 218mm Bowl widths: 2 x 350mm Pop up waste lqr100-2 "Quadra" 1.5 bowl single drainer ultra low profile inset sink VR78A "Qu a d r a" s i n g l e b o w l u l t r a l o w p r o f i l e i n s e t s i n k w i t h 2 dark graphite chopping boards and colander bowl Bowl depth: 218mm Bowl widths: 1 x 174mm, 1 x 350mm Pop up waste Bowl width: 1 x 780mm Pop up waste Colander bowl supplied as standard 186 also available in the following versions : Silver glass chopping boards VR78S Black glass chopping boards VR78N
lqr861-2 "Quadra" single bowl, single drainer ultra low profile inset sink VQ72-2 "Quadra" single bowl ultra low profile inset sink Bowl depth : 218mm Bowl widths: 1 x 350mm Pop up waste Bowl depth : 210mm Bowl width: 1 x 720mm also available in the following versions : Bowl width: 1 x 500mm Bowl width: 1 x 200mm VQ50-2 VQ20 VQ40-2 "Quadra" single bowl ultra low profile inset sink quadra inset models: All s i n k s o n t h e s e p a g e s f e a t u r e t h e QUADRA d e s i g n, a n d d e t a i l s o f all the versions available are shown below Model Drainer Position Bowls Minimum Base Unit (cm) Bowl depth : 210mm Bowl width: 1 x 400mm LQR116-2 Reversible 2 90 LQR862-2 N/A 2 80 LQR100-2 Reversible 1.5 70 VR78S N/A 1 90 VR78N N/A 1 90 VR78A N/A 1 90 LQR861-2 Reversible 1 50 VQ72-2 N/A 1 80 VQ50-2 N/A 1 60 VQ40-2 N/A 1 50 VQ20 N/A 1 30 All sinks are supplied with overflows, drains, gaskets, fixing clips and dishwasher drain taps as standard accessories. sinks quadra (inset) 187
lqr116-2 lqr862-2 lqr100 vr78n vr78s vr78a 188
lqr861-2 vq72-2 vq40-2 vq50-2 sinks quadra (inset) vq20 189
VSTQ72-2 "Quadra" single bowl undermount sink vstq50-2 "Quadra" single bowl undermount sink Bowl width: 1 x 720mm Bowl width: 1 x 500mm vstq40-2 "Quadra" single bowl undermount sink vstq20 "Quadra" single bowl undermount sink Bowl width: 1 x 400mm Bowl width: 1 x 200mm 190
quadra undermount models: All s i n k s o n t h e s e p a g e s f e a t u r e t h e QUADRA d e s i g n, a n d d e t a i l s o f all the versions available are shown below Model Drainer Position Bowls Mininmum Base Unit (cm) VSTQ72-2 N/A 1 80 VSTQ50-2 N/A 1 60 VSTQ40-2 N/A 1 50 VSTQ20 N/A 1 30 All sinks are supplied with overflows, drains, gaskets, fixing clips and dishwasher drain taps as standard accessories. VSTQ72-2 VSTQ50-2 sinks quadra (undermount) VSTQ40-2 VSTQ20 191
lv95-3 "Stilla" double bowl ultra low profile inset sink lv100s-3 "Stilla" 1.5 bowl, single drainer ultra low profile inset sink Bowl widths: 2 x 340mm Bowl depth: 211mm Bowl widths: 1 x 340mm, 1 x 165mm LV951S-3 "Stilla" single bowl, single drainer ultra low profile inset sink stilla inset models: All s i n k s o n t h e s e p a g e s f e a t u r e t h e STILLA d e s i g n, a n d d e t a i l s o f a l l the versions available are shown below Model Drainer Position Bowls Mininmum Base Unit (cm) LV95-3 N/A 2 80 LV100D-3 LH 1.5 60 LV100S-3 RH 1.5 60 LV951D-3 LH 1 60 LV951S-3 RH 1 60 All sinks are supplied with overflows, drains, gaskets, fixing clips and dishwasher drain taps as standard accessories. Bowl width: 1 x 450mm 192
lv95-3 lv100s-3 lv951d-3 sinks stilla (inset) 193
DBD3C "Alba" 2.5 bowl corner inset sink SHB116R "Alba" d o u b l e b o w l, s i n g l e d r a i n e r i n s e t s i n k Bowl widths: 2 x 340mm, 1 x 165mm also available in the following versions : With fabric finish DBD3CFR Bowl widths: 2 x 350mm also available in the following versions : With fabric finish SHB116RFR / SHB116LFR SBD102R "Alba" 1.5 b o w l, s i n g l e d r a i n e r i n s e t s i n k SRO3416 Alba 1.5 bowl inset sink Bowl widths: 1 x 350mm, 1 x 165mm also available in the following versions : With fabric finish SBD102RFR / SBD102LFR Bowl widths: 1 x 340mm, 1 x 165mm Pop-up waste 194
WSB861R "Alba" single bowl, single drainer inset sink FM34R-1 "Alba" single bowl inset sink Bowl widths: 1 x 450mm Bowl widths: 1 x 174mm, 1 x 350mm FM37C & 11I "Alba" round bowl inset sink and inset drainer alba inset models: All s i n k s o n t h e s e p a g e s f e a t u r e t h e ALBA d e s i g n, a n d d e t a i l s o f a l l the versions available are shown below Model Drainer Position Bowls Mininmum Base Unit (cm) Bowl depth: 175mm Bowl diameter: 430mm Internal diameter: 375mm Drain: 3.5 DBD3C N/A 2.5 90 DBD3CFR N/A 2.5 90 SHB116R RH 2 90 SHB116L LH 2 90 SHB116RFR RH 2 90 SHB116LFR LH 2 90 SBD102R RH 1.5 60 SBD102L LH 1.5 60 SBD102RFR RH 1.5 60 SBD102LFR LH 1.5 60 SRO3416 N/A 1.5 60 WSB861R RH 1 60 WSB861L LH 1 60 FM34R-1 N/A 1 40 FM37C N/A 1 50 11I N/A N/A 50 sinks alba (inset) All sinks are supplied with overflows, drains, gaskets, fixing clips and dishwasher drain taps as standard accessories. 195
DBD3C DBD3CFR SHB116R SHB116L SHB116RFR SHB116LFR SBD102R SBD102L SBD102RFR SBD102LFR SRO3416 196
WSB861R WSB861L FM34R-1 FM37C & 11I sinks alba (inset) 197
UM4530 "Alba" double bowl undermount sink UM3416-1 "Alba" 1.5 bowl undermount sink Bowl depth: 180mm Bowl widths: 1 x 450mm, 1 x 300mm Bowl depth: 180mm Bowl widths: 1 x 340mm, 1 x 165mm UM30/45 "Alba" single bowl undermount sinks alba undermount models: All s i n k s o n t h e s e p a g e s f e a t u r e t h e ALBA d e s i g n, a n d d e t a i l s o f a l l the versions available are shown below Model Drainer Position Bowls Mininmum Base Unit (cm) UM4530 N/A 2 90 UM3416-1 N/A 1.5 60 UM45 N/A 1 50 UM40 N/A 1 50 UM30 N/A 1 40 UM16 N/A 1 30 All sinks are supplied with overflows, drains, gaskets, fixing clips and dishwasher drain taps as standard accessories. Bowl depths: 180mm Bowl widths: UM45: 1 x 450mm UM30: 1 x 300mm 198 also available in the following versions : Bowl width: 1 x 400mm UM40 Bowl width: 1 x 165mm UM16
UM4530 UM3416-1 UM30 UM45 UM40 UM16 alba (undermount) sinks 199
le116s "Rigae" double bowl, single drainer inset sink le862 "Rigae" double bowl inset sink Bowl depth: 180mm Bowl widths: 2 x 350mm Bowl depth: 180mm Bowl widths: 2 x 350mm le102d "Rigae" 1.5 bowl, single drainer inset sink le861s "Rigae" single bowl, single drainer inset sink Bowl depth: 180mm Bowl widths: 1 x 350mm, 1 x 165mm Bowl depth: 180mm Bowl width: 1 x 350mm 200
rigae inset models: All s i n k s o n t h e s e p a g e s f e a t u r e t h e RIGAE d e s i g n, a n d d e t a i l s o f a l l the versions available are shown below Model Drainer Position Bowls Mininmum Base Unit (cm) LE116D RH 2 90 LE116S LH 2 90 LE862 N/A 2 90 LE102D RH 1.5 60 LE102S LH 1.5 60 LE861D RH 1 45 LE861S LH 1 45 All sinks are supplied with overflows, drains, gaskets, fixing clips and dishwasher drain taps as standard accessories. LE116S LE116D LE862 sinks rigae (inset) LE102D LE102S LE861S LE861D 201
SINK ACCESSORIES Bowl width & type 450mm bowl - square corners 450mm bowl - curved corners 430mm diameter round bowl 340mm bowl - curved corners 300mm bowl - curved corners 200mm half bowl - square corners 165mm oval half bowl hardwood chopping board TLQ40 CB45-1 CB37C CB34 CB30 N/A N/A white chopping board TTQ40 N/A N/A N/A N/A N/A N/A hardwood chopping board N/A N/A N/A TLC34 N/A N/A N/A with white insert and colander st/steel drainer basket N/A DB45 DB37C DB34 DB30 N/A N/A st/steel colander VSH40Q N/A N/A N/A N/A VSH20Q HBCOL Square white chopping board Hard-wood chopping board Hardwood chopping b o a r d w i t h w h i t e i n s e r t and colander NB: These boards are not suitable for use with undermounted sinks. St/steel r e c t a n g u l a r c o l a n d e r St/steel rectangular colander St/steel colander 202
St/steel drainer basket Round drainer basket and hardwood chopping board Space saver waste kits Space saver waste kits are available as an alternative to the kits supplied with the Smeg range of sinks. They are specially designed to take up as little room as possible beneath the sink bowl, with all the waste pipes being positioned at the rear of the unit, leaving maximum room for storage. SSK1 Single bowl space saver waste kit, includes multi-fit connector SSK2 Double/1.5 bowl space saver waste kit, includes 2 multi-fit connectors SSK3 Corner sink/2.5 bowl space saver waste kit, includes 3 multi-fit connectors T12A-F Multi-fit connector sinks accessories 203
MFQ8-IS Single lever mixer MFQ7-IS single lever mixer mfq8-is Brushed stainless steel effect Single lever mixer with flat spout Tap swivels 170 Aerator with anti-splash Ceramic disc cartridge Brushed stainless steel effect Single lever mixer with flat spout Tap swivels 170 Aerator with anti-splash Ceramic disc cartridge mfq7-is MFQ6-IS Single lever mixer MDQ5-IS single lever mixer with pull out spray mfq6-is Brushed stainless steel effect Single lever mixer with square spout Complete spout swivels 170 End section can swivel 120 Aerator with anti-splash Ceramic disc cartridge Brushed stainless steel effect Single lever mixer with square spout Single jet pull out spray Spout swivels 170 Spray section incorporates anti drip valve Aerator with anti-splash Ceramic disc cartridge 204 mdq5-is
UKPARMA Single Lever Mixer IMOLA Single Lever Mixer ukparma Chrome finish Single lever mixer with square spout Swivel spout Aerator Ceramic disc cartridge Chrome finish Single lever mixer with flat spout Swivel spout Aerator Ceramic disc cartridge NAPOLI Water purification tap PISA-BN Traditional mixer imola napoli Chrome finish Separate control for filtered water Complete with heavy metal filter and filter housing Swivel spout with anti-splash Compression valve Brushed nickel finish Dual flow mixer tap Swivel spout with anti-splash Quarter turn ceramic disc valve Copper connection tails Also available: Chrome finish PISA-C sinks taps pisa-bn PISA-C 205
SIENA Single lever mixer TORINO Single lever mixer Brushed stainless steel Single lever mixer in modern design Swivel spout Aerator Ceramic disc cartridge Brushed stainless steel Single lever mixer with top control Swivel spout Aerator Ceramic disc cartridge siena SORRENTO Si n g l e lever t a p torino Chrome finish Single lever mixer with side mounted control Swivel spout Aerator Ceramic disc cartridge 206 sorrento
GENOA Single lever mixer ROMA Si n g l e lever t a p w i t h p u l l o u t s p r a y Chrome finish Single lever mixer with black Joystick control Swivel spout Aerator Ceramic disc cartridge Chrome finish Single lever mixer Pull out spray Aerator Ceramic disc cartridge genoa MILANO Si n g l e lever t a p roma Chrome finish Single lever mixer with curved neck Swivel spout Aerator Ceramic disc cartridge sinks taps milano 207