4-5T/H Palm Biomass Waste Pellet Production Line With this 4-5t/h production line, the palm biomass pellets can be produced when the raw materials go through chipping, crushing (or grinding), pelleting, cooling, and packaging. The followings are the brief introductions of the machines adopted in 4-5 t/h palm biomass waste pellet plant. BX216 Drum Wood Chipper Wood chipper is used for processing tree limbs or trunks into smaller wood chips. It is mainly composed of base, feed inlet, cutter, body, blade and electronic control. The blades can be adjusted so as to produce chips of different sizes. There are disc wood chipper and drum wood chipper to be chosen. In this production line, we recommend you BX216 drum wood chipper. Features of BX216 Drum Wood Chipper 1.With a wide application for chipping wood materials and processing biomass materials. 2.With the secondary-feeding system, the drum wood chipper can work more
efficiently. 3.With its body made of high-strength steel, is shock resistant and firm. 4.A series of screens is able to meet your requirement for processing wood chips with different sizes. 5.With the hydraulic buffer system, this chipper can be easily maintained. Model BX216 Wood chip size 30mm Feeding material size Blades amount 2 Roller turning speed Conveyor engine 230*500mm Capacity 7-8t 590rpm 3kw Power of main engine Feeding roller engine Oil pump engine 55kw 3-4kw 1.5kw Weight 4070kg Dimension 1800*4900*1210mm ZW120B Water Drop Hammer mill This water drop wood hammer mill is specially developed for large or medium sized wood processing industry. The advantages we choose water drop hammer mill are shown as below. 1. The all-in-one base design makes the structure of the hammer mill steadier. 2. The advanced double-strike technology is adopted for the pulverizing chamber, the pedestal of which is of good rigidity and small vibration. 3. A variety of screens are available to choose.
4. Adopting the flexible opening device and elastic pressure screen mechanism, it is convenient to operate and maintain. 5. The internationally- advanced energy-saving technology is adopted. Model Capacity Rotor diameter ZW120B 4.5-5.5 t/h 660mm Main shaft rotate speed Hammer linear speed Grinding chamber width 2980RPM 87m/s 1200mm Hammer quantity Power Normal air volume 156 132/160kw 130m 3 /min MZLH508 Ring Die Pellet Mill (three sets) In this production line, three MZLH508 ring die pellet mills shall be adopted to meet the production requirement. Features 1. With high efficiency, lower cnsumption and stable operation. 2. With better transmission performance and less noise due to the imported bearings (NSK) & seals (NAK) equipped. 3. With longer service time due to the corrosion-resistant ring die made of stainless steel. 4. Attributing to the permanent magnet device, impurities can be removed during the pelletizing process. 5. The stand-alone oil lubrication system is more effective in maintaining lubrication and keeping the bearings from abrasion. Model MZLH508 Capacity 1.5t/h Main motor 90kw Screw feeder 2.2kw Ring die inner Ring die rotate 508mm diameter speed 150rpm Roller outer diameter 190mm Pellet size Roller quantity 2 Roller working temperature 6mm, 8mm, 10mm etc. 85
SKLN4 Pellet Cooler The SKLN4 cooler is adopted for this palm biomass pellets production line. Features: 1. Advanced counter-flow cooling principle is adopted, avoiding surface of the pellet from being cracked. 2. The pellets can be cooled evenly and sufficiently due to the octagon cooling design. 3. Stable operation can be ensured and materials can be reduced due to the equipped reciprocal slide valve. 4. Closed air entry system is adopted to enlarge the area of inlet air, thus ensuring efficient cooing effect and avoiding cross contamination. 5. It consumes less energy and it can be easily operated. Model SKLN4 Production capacity 3-5t/h Cooling volume 4m 3 Cooling time 6-10min Power 1.5kw Air lock 0.55kw WDCS-50 Biomass Pellet Packing Machine Main features of packing machine: 1.With simple structure and flexible operation. 2.Highly automatic and precise in weighting and packing. 3.Easy to assemble, operate, and maintain. 4.With accurate weighing & packing performance.
Model Capacity Power Dimension WDCS-50 3-4bags/min(5-50kg/bag) 2.2kw 2*0.8*2.6m