vacon 0 machinery how would you like your ac drive today?
easy adaptation for customer requirements The Vacon 0 Machinery is an extremely compact AC drive for machine builders in the power range from 0.25 kw to 5.5 kw. The Vacon 0 Machinery offers ultimate flexibility in integ the customer requirements into the AC drive. Its intelligent construction allows easy integration into environments of all kinds, according to the customer needs. The unique Application Interface Board provides predefined interfaces, and a possibility of customerspecified interfaces. The Vacon 0 Machinery is specifically suited to the needs of machine builders. Vacon s new drive is one of the smallest drives in the market today. The size of the drive saves valuable installation space and fits into the smallest of places. Despite the small size, the drive is packed with features such as integrated EMC filters, intelligent navigation and a flexible customer interface. Furthermore, the design of the drive makes it possible for the customer to specify their own interfaces if necessary. The Vacon 0 Machinery is suited to the machine builders particularly due to its flexible interface it will satisfy a wide variety of needs with few modifications. The drive will also take its place as an allround general drive when equipped with the Vacon standard interfaces, which offers e.g. Modbus communication as standard.
product range vacon 0 machinery, 208 240 v, ~ (3~ motor) Motor shaft power (230 V) and current.5 x Vacon 000 L0002 0.25.7 2.6 Vacon 000 L00022 Vacon 000 L00032 2.8 MI versatile control i/o emc and installation environment The Vacon 0 Machinery is an easily tailored drive to meet the control requirements of the customer. The Vacon 0 Machinery fulfils the requirements of EN68003 (2004) which sets the limits for both the emission and immunity of radio frequency disturbances. The environment is divided into the st and 2nd environments, which, in practice, means public and industrial networks. The Vacon 0 Machinery architecture is Standard API 4.2 created keeping in mind easy and fast tai Vacon offers a set of APIs as standard, loring. This is achieved by the control card which is available from the shelf. of the Vacon 0 Machinery, the Application API Full Interface API. The API is the interface of API Limited the drive, providing the main tailoring ele API RS485 Vacon 000 L00042 3.7 Vacon 000 L00052. 4.8 7.2 Vacon 000 L00072.5 7.0 0.5 Vacon 000 L002.0 6.5 technical data Mains Motor ment for the customer. A set of API boards is offered as standard, but the API construc vacon 0 machinery, 380 480 v, 3~ (3~ motor) Motor shaft power (400 V) and current.5 x Vacon 000 3L0004.3 2.0 Vacon 000 3L00024.9 2.9 Vacon 000 3L00034 Vacon 000 3L00044. 3.3 5.0 Vacon 000 3L00054.5 4.3 6.5 Vacon 000 3L00064 8.4 Vacon 000 3L00084 3.0 7.6.4 Vacon 000 3L00094 4.0 9.0 3.5 Vacon 000 3L0024 5.5 2.0 8.0 MI MI W (mm) D (mm) 57 66 98 Standard create application software. Additionally, it EN68003 (2004) even allows the API specification to be integrated into the customer s design. Full Limited RS485 +0 V ref +24 V out DI 6 3 AI 2 (V and ma) (V or ma) AO 90 02 25 00 09 Relay RS485 2 vacon 0 machinery type code vacon 000l0004 machinery +codes Customer API Voltage phase Vacon 0 Machinery 208 240 V 380 480 V C2 st (public) H C3 L N T Control characteristics standard interfaces 95 Current Vacon 0 Machinery Input Vacon class Ambient conditions DO Product Environment main dimensions H (mm) tion also gives the customers a free hand to Version Customerspecific applications Do you have special needs, an interface The Vacon 0 Machinery supports Va setup that has become a brand or even a con s standard Vacon PC tools. These standard feature in your products? With include, for example, Vacon NC633 By default, the type codes include the following: +codes: the API architecture you have a pos Engineering Tool which can be used for EMC +codes are optional sibility to specify your own API board. creating customerspecific software. API RS485 to change the setup, e.g. Vacon s design service helps you to cre Vacon offers a design service to create IP20 API RS485 > API Full = SM0 ate the specification to develop and to these applications, or they can be de General Purpose application software EMC > EMC C2 = EMC 2 manufacture the desired solution. For signed by the customer or a competent further information, please contact your third party. local Vacon representative. tools for vacon 0 Vacon offers one of the widest range of tools for micro drives in the market. The functionality integrated into Vacon 0 drives gives the customer a possibility to program, commission or monitor the product in a way that they would only normally expect in bigger drives. PC tools MCA Micro Communication Adapter The Vacon 0 Machinery supports Vacon s With the MCA the customer can upload existing PC tools for the required func and download parameters without pow tionality. The software is available on our ering the drive. This will allow the user to web site, www.vacon.com. The tools are parameterize the drive without first con intended for tasks such as commissioning, necting the drive to the mains. monitoring, loading various applications and application programming. The PC is connected to the drive with a Micro Communication Adapter MCA (option order code) and a cable. There are two options for the cable: standard USB (option order code) and Vacon s own RS485 cable (option order code). Vacon NCDrive, Vacon NCLoad and Vacon NC633 Engineering Tool all work for required functions with Vacon s micro products. EMC Safety Protections Input voltage Uin 380...480 V, 5 %...+0 % 3~ 208 240 V, 5 %...+0 % ~ 45 66 Hz Input frequency Connection to mains Once per minute or less (normal case) 0...Uin Output voltage Output current Continuous rated current IN at ambient temperature max. +50ºC, overload.5 x IN max. min/0 min Starting current / Current 2 x IN for 2 secs in every 20 sec period torque Torque depends on motor Output frequency 0 320 Hz Frequency resolution 0.0 Hz Frequency Control U/f Control method Open loop sensorless vector control Switching frequency...6 khz; Factory default 6 khz Frequency reference Resolution 0.0 Hz Field weakening point 30 320 Hz Acceleration time 0. 3000 sec Deceleration time 0. 3000 sec Braking torque 00 % x TN with brake ( 400 V,.5 kw) 30 % x TN without brake Ambient ope 0 C (no frost) +50 C: rated loadability IN temperature Storage temperature 40 C +70 C Relative humidity 0 95 % RH, noncondensing, noncorrosive, no dripping water Air quality: chemical vapours IEC 7233, unit in operation, class 3C2 particles IEC 7233, unit in operation, class 3S2 Altitude 00 % load capacity (no de) up to 000 m % de for each 00 m above 000 m; max. 2000 m Vibration 3...50 Hz EN6006826 Displacement amplitude (peak) mm at 3...5.8 Hz Max acceleration amplitude G at 5.8...50 Hz Shock UPS Drop Test (for applicable UPS weights) IEC 68227 Storage and shipping: max 5 G, ms (in package) Enclosure class IP20 Immunity Complies with EN68003 (2004) Emissions 230 V: EMC level H: with an internal RFI filter option 400 V: EMC level H: with an internal RFI filter option 68005, EN60204, CE, UL, cul, IEC (see unit nameplate for more detailed approvals) Overvoltage protection 230 V series: 437 VDC; 400 V series: 874 VDC trip level Undervoltage protection 230 V series: 83 VDC; 400 V series: 333 VDC trip level Earth fault protection Earth fault is tested before every start. In case of earth fault in motor or motor cable, only the frequency converter is protected Unit overtemperature Motor overload Motor stall Motor underload Overcurrent protection, trip limit 4.0 x IN instantaneously
product range vacon 0 machinery, 208 240 v, ~ (3~ motor) Motor shaft power (230 V) and current.5 x Vacon 000 L0002 0.25.7 2.6 Vacon 000 L00022 Vacon 000 L00032 2.8 MI versatile control i/o emc and installation environment The Vacon 0 Machinery is an easily tailored drive to meet the control requirements of the customer. The Vacon 0 Machinery fulfils the requirements of EN68003 (2004) which sets the limits for both the emission and immunity of radio frequency disturbances. The environment is divided into the st and 2nd environments, which, in practice, means public and industrial networks. The Vacon 0 Machinery architecture is Standard API 4.2 created keeping in mind easy and fast tai Vacon offers a set of APIs as standard, loring. This is achieved by the control card which is available from the shelf. of the Vacon 0 Machinery, the Application API Full Interface API. The API is the interface of API Limited the drive, providing the main tailoring ele API RS485 Vacon 000 L00042 3.7 Vacon 000 L00052. 4.8 7.2 Vacon 000 L00072.5 7.0 0.5 Vacon 000 L002.0 6.5 technical data Mains Motor ment for the customer. A set of API boards is offered as standard, but the API construc vacon 0 machinery, 380 480 v, 3~ (3~ motor) Motor shaft power (400 V) and current.5 x Vacon 000 3L0004.3 2.0 Vacon 000 3L00024.9 2.9 Vacon 000 3L00034 Vacon 000 3L00044. 3.3 5.0 Vacon 000 3L00054.5 4.3 6.5 Vacon 000 3L00064 8.4 Vacon 000 3L00084 3.0 7.6.4 Vacon 000 3L00094 4.0 9.0 3.5 Vacon 000 3L0024 5.5 2.0 8.0 MI MI W (mm) D (mm) 57 66 98 Standard create application software. Additionally, it EN68003 (2004) even allows the API specification to be integrated into the customer s design. Full Limited RS485 +0 V ref +24 V out DI 6 3 AI 2 (V and ma) (V or ma) AO 90 02 25 00 09 Relay RS485 2 vacon 0 machinery type code vacon 000l0004 machinery +codes Customer API Voltage phase Vacon 0 Machinery 208 240 V 380 480 V C2 st (public) H C3 L N T Control characteristics standard interfaces 95 Current Vacon 0 Machinery Input Vacon class Ambient conditions DO Product Environment main dimensions H (mm) tion also gives the customers a free hand to Version Customerspecific applications Do you have special needs, an interface The Vacon 0 Machinery supports Va setup that has become a brand or even a con s standard Vacon PC tools. These standard feature in your products? With include, for example, Vacon NC633 By default, the type codes include the following: +codes: the API architecture you have a pos Engineering Tool which can be used for EMC +codes are optional sibility to specify your own API board. creating customerspecific software. API RS485 to change the setup, e.g. Vacon s design service helps you to cre Vacon offers a design service to create IP20 API RS485 > API Full = SM0 ate the specification to develop and to these applications, or they can be de General Purpose application software EMC > EMC C2 = EMC 2 manufacture the desired solution. For signed by the customer or a competent further information, please contact your third party. local Vacon representative. tools for vacon 0 Vacon offers one of the widest range of tools for micro drives in the market. The functionality integrated into Vacon 0 drives gives the customer a possibility to program, commission or monitor the product in a way that they would only normally expect in bigger drives. PC tools MCA Micro Communication Adapter The Vacon 0 Machinery supports Vacon s With the MCA the customer can upload existing PC tools for the required func and download parameters without pow tionality. The software is available on our ering the drive. This will allow the user to web site, www.vacon.com. The tools are parameterize the drive without first con intended for tasks such as commissioning, necting the drive to the mains. monitoring, loading various applications and application programming. The PC is connected to the drive with a Micro Communication Adapter MCA (option order code) and a cable. There are two options for the cable: standard USB (option order code) and Vacon s own RS485 cable (option order code). Vacon NCDrive, Vacon NCLoad and Vacon NC633 Engineering Tool all work for required functions with Vacon s micro products. EMC Safety Protections Input voltage Uin 380...480 V, 5 %...+0 % 3~ 208 240 V, 5 %...+0 % ~ 45 66 Hz Input frequency Connection to mains Once per minute or less (normal case) 0...Uin Output voltage Output current Continuous rated current IN at ambient temperature max. +50ºC, overload.5 x IN max. min/0 min Starting current / Current 2 x IN for 2 secs in every 20 sec period torque Torque depends on motor Output frequency 0 320 Hz Frequency resolution 0.0 Hz Frequency Control U/f Control method Open loop sensorless vector control Switching frequency...6 khz; Factory default 6 khz Frequency reference Resolution 0.0 Hz Field weakening point 30 320 Hz Acceleration time 0. 3000 sec Deceleration time 0. 3000 sec Braking torque 00 % x TN with brake ( 400 V,.5 kw) 30 % x TN without brake Ambient ope 0 C (no frost) +50 C: rated loadability IN temperature Storage temperature 40 C +70 C Relative humidity 0 95 % RH, noncondensing, noncorrosive, no dripping water Air quality: chemical vapours IEC 7233, unit in operation, class 3C2 particles IEC 7233, unit in operation, class 3S2 Altitude 00 % load capacity (no de) up to 000 m % de for each 00 m above 000 m; max. 2000 m Vibration 3...50 Hz EN6006826 Displacement amplitude (peak) mm at 3...5.8 Hz Max acceleration amplitude G at 5.8...50 Hz Shock UPS Drop Test (for applicable UPS weights) IEC 68227 Storage and shipping: max 5 G, ms (in package) Enclosure class IP20 Immunity Complies with EN68003 (2004) Emissions 230 V: EMC level H: with an internal RFI filter option 400 V: EMC level H: with an internal RFI filter option 68005, EN60204, CE, UL, cul, IEC (see unit nameplate for more detailed approvals) Overvoltage protection 230 V series: 437 VDC; 400 V series: 874 VDC trip level Undervoltage protection 230 V series: 83 VDC; 400 V series: 333 VDC trip level Earth fault protection Earth fault is tested before every start. In case of earth fault in motor or motor cable, only the frequency converter is protected Unit overtemperature Motor overload Motor stall Motor underload Overcurrent protection, trip limit 4.0 x IN instantaneously
product range vacon 0 machinery, 208 240 v, ~ (3~ motor) Motor shaft power (230 V) and current.5 x Vacon 000 L0002 0.25.7 2.6 Vacon 000 L00022 Vacon 000 L00032 2.8 MI versatile control i/o emc and installation environment The Vacon 0 Machinery is an easily tailored drive to meet the control requirements of the customer. The Vacon 0 Machinery fulfils the requirements of EN68003 (2004) which sets the limits for both the emission and immunity of radio frequency disturbances. The environment is divided into the st and 2nd environments, which, in practice, means public and industrial networks. The Vacon 0 Machinery architecture is Standard API 4.2 created keeping in mind easy and fast tai Vacon offers a set of APIs as standard, loring. This is achieved by the control card which is available from the shelf. of the Vacon 0 Machinery, the Application API Full Interface API. The API is the interface of API Limited the drive, providing the main tailoring ele API RS485 Vacon 000 L00042 3.7 Vacon 000 L00052. 4.8 7.2 Vacon 000 L00072.5 7.0 0.5 Vacon 000 L002.0 6.5 technical data Mains Motor ment for the customer. A set of API boards is offered as standard, but the API construc vacon 0 machinery, 380 480 v, 3~ (3~ motor) Motor shaft power (400 V) and current.5 x Vacon 000 3L0004.3 2.0 Vacon 000 3L00024.9 2.9 Vacon 000 3L00034 Vacon 000 3L00044. 3.3 5.0 Vacon 000 3L00054.5 4.3 6.5 Vacon 000 3L00064 8.4 Vacon 000 3L00084 3.0 7.6.4 Vacon 000 3L00094 4.0 9.0 3.5 Vacon 000 3L0024 5.5 2.0 8.0 MI MI W (mm) D (mm) 57 66 98 Standard create application software. Additionally, it EN68003 (2004) even allows the API specification to be integrated into the customer s design. Full Limited RS485 +0 V ref +24 V out DI 6 3 AI 2 (V and ma) (V or ma) AO 90 02 25 00 09 Relay RS485 2 vacon 0 machinery type code vacon 000l0004 machinery +codes Customer API Voltage phase Vacon 0 Machinery 208 240 V 380 480 V C2 st (public) H C3 L N T Control characteristics standard interfaces 95 Current Vacon 0 Machinery Input Vacon class Ambient conditions DO Product Environment main dimensions H (mm) tion also gives the customers a free hand to Version Customerspecific applications Do you have special needs, an interface The Vacon 0 Machinery supports Va setup that has become a brand or even a con s standard Vacon PC tools. These standard feature in your products? With include, for example, Vacon NC633 By default, the type codes include the following: +codes: the API architecture you have a pos Engineering Tool which can be used for EMC +codes are optional sibility to specify your own API board. creating customerspecific software. API RS485 to change the setup, e.g. Vacon s design service helps you to cre Vacon offers a design service to create IP20 API RS485 > API Full = SM0 ate the specification to develop and to these applications, or they can be de General Purpose application software EMC > EMC C2 = EMC 2 manufacture the desired solution. For signed by the customer or a competent further information, please contact your third party. local Vacon representative. tools for vacon 0 Vacon offers one of the widest range of tools for micro drives in the market. The functionality integrated into Vacon 0 drives gives the customer a possibility to program, commission or monitor the product in a way that they would only normally expect in bigger drives. PC tools MCA Micro Communication Adapter The Vacon 0 Machinery supports Vacon s With the MCA the customer can upload existing PC tools for the required func and download parameters without pow tionality. The software is available on our ering the drive. This will allow the user to web site, www.vacon.com. The tools are parameterize the drive without first con intended for tasks such as commissioning, necting the drive to the mains. monitoring, loading various applications and application programming. The PC is connected to the drive with a Micro Communication Adapter MCA (option order code) and a cable. There are two options for the cable: standard USB (option order code) and Vacon s own RS485 cable (option order code). Vacon NCDrive, Vacon NCLoad and Vacon NC633 Engineering Tool all work for required functions with Vacon s micro products. EMC Safety Protections Input voltage Uin 380...480 V, 5 %...+0 % 3~ 208 240 V, 5 %...+0 % ~ 45 66 Hz Input frequency Connection to mains Once per minute or less (normal case) 0...Uin Output voltage Output current Continuous rated current IN at ambient temperature max. +50ºC, overload.5 x IN max. min/0 min Starting current / Current 2 x IN for 2 secs in every 20 sec period torque Torque depends on motor Output frequency 0 320 Hz Frequency resolution 0.0 Hz Frequency Control U/f Control method Open loop sensorless vector control Switching frequency...6 khz; Factory default 6 khz Frequency reference Resolution 0.0 Hz Field weakening point 30 320 Hz Acceleration time 0. 3000 sec Deceleration time 0. 3000 sec Braking torque 00 % x TN with brake ( 400 V,.5 kw) 30 % x TN without brake Ambient ope 0 C (no frost) +50 C: rated loadability IN temperature Storage temperature 40 C +70 C Relative humidity 0 95 % RH, noncondensing, noncorrosive, no dripping water Air quality: chemical vapours IEC 7233, unit in operation, class 3C2 particles IEC 7233, unit in operation, class 3S2 Altitude 00 % load capacity (no de) up to 000 m % de for each 00 m above 000 m; max. 2000 m Vibration 3...50 Hz EN6006826 Displacement amplitude (peak) mm at 3...5.8 Hz Max acceleration amplitude G at 5.8...50 Hz Shock UPS Drop Test (for applicable UPS weights) IEC 68227 Storage and shipping: max 5 G, ms (in package) Enclosure class IP20 Immunity Complies with EN68003 (2004) Emissions 230 V: EMC level H: with an internal RFI filter option 400 V: EMC level H: with an internal RFI filter option 68005, EN60204, CE, UL, cul, IEC (see unit nameplate for more detailed approvals) Overvoltage protection 230 V series: 437 VDC; 400 V series: 874 VDC trip level Undervoltage protection 230 V series: 83 VDC; 400 V series: 333 VDC trip level Earth fault protection Earth fault is tested before every start. In case of earth fault in motor or motor cable, only the frequency converter is protected Unit overtemperature Motor overload Motor stall Motor underload Overcurrent protection, trip limit 4.0 x IN instantaneously
product range vacon 0 machinery, 208 240 v, ~ (3~ motor) Motor shaft power (230 V) and current.5 x Vacon 000 L0002 0.25.7 2.6 Vacon 000 L00022 Vacon 000 L00032 2.8 MI versatile control i/o emc and installation environment The Vacon 0 Machinery is an easily tailored drive to meet the control requirements of the customer. The Vacon 0 Machinery fulfils the requirements of EN68003 (2004) which sets the limits for both the emission and immunity of radio frequency disturbances. The environment is divided into the st and 2nd environments, which, in practice, means public and industrial networks. The Vacon 0 Machinery architecture is Standard API 4.2 created keeping in mind easy and fast tai Vacon offers a set of APIs as standard, loring. This is achieved by the control card which is available from the shelf. of the Vacon 0 Machinery, the Application API Full Interface API. The API is the interface of API Limited the drive, providing the main tailoring ele API RS485 Vacon 000 L00042 3.7 Vacon 000 L00052. 4.8 7.2 Vacon 000 L00072.5 7.0 0.5 Vacon 000 L002.0 6.5 technical data Mains Motor ment for the customer. A set of API boards is offered as standard, but the API construc vacon 0 machinery, 380 480 v, 3~ (3~ motor) Motor shaft power (400 V) and current.5 x Vacon 000 3L0004.3 2.0 Vacon 000 3L00024.9 2.9 Vacon 000 3L00034 Vacon 000 3L00044. 3.3 5.0 Vacon 000 3L00054.5 4.3 6.5 Vacon 000 3L00064 8.4 Vacon 000 3L00084 3.0 7.6.4 Vacon 000 3L00094 4.0 9.0 3.5 Vacon 000 3L0024 5.5 2.0 8.0 MI MI W (mm) D (mm) 57 66 98 Standard create application software. Additionally, it EN68003 (2004) even allows the API specification to be integrated into the customer s design. Full Limited RS485 +0 V ref +24 V out DI 6 3 AI 2 (V and ma) (V or ma) AO 90 02 25 00 09 Relay RS485 2 vacon 0 machinery type code vacon 000l0004 machinery +codes Customer API Voltage phase Vacon 0 Machinery 208 240 V 380 480 V C2 st (public) H C3 L N T Control characteristics standard interfaces 95 Current Vacon 0 Machinery Input Vacon class Ambient conditions DO Product Environment main dimensions H (mm) tion also gives the customers a free hand to Version Customerspecific applications Do you have special needs, an interface The Vacon 0 Machinery supports Va setup that has become a brand or even a con s standard Vacon PC tools. These standard feature in your products? With include, for example, Vacon NC633 By default, the type codes include the following: +codes: the API architecture you have a pos Engineering Tool which can be used for EMC +codes are optional sibility to specify your own API board. creating customerspecific software. API RS485 to change the setup, e.g. Vacon s design service helps you to cre Vacon offers a design service to create IP20 API RS485 > API Full = SM0 ate the specification to develop and to these applications, or they can be de General Purpose application software EMC > EMC C2 = EMC 2 manufacture the desired solution. For signed by the customer or a competent further information, please contact your third party. local Vacon representative. tools for vacon 0 Vacon offers one of the widest range of tools for micro drives in the market. The functionality integrated into Vacon 0 drives gives the customer a possibility to program, commission or monitor the product in a way that they would only normally expect in bigger drives. PC tools MCA Micro Communication Adapter The Vacon 0 Machinery supports Vacon s With the MCA the customer can upload existing PC tools for the required func and download parameters without pow tionality. The software is available on our ering the drive. This will allow the user to web site, www.vacon.com. The tools are parameterize the drive without first con intended for tasks such as commissioning, necting the drive to the mains. monitoring, loading various applications and application programming. The PC is connected to the drive with a Micro Communication Adapter MCA (option order code) and a cable. There are two options for the cable: standard USB (option order code) and Vacon s own RS485 cable (option order code). Vacon NCDrive, Vacon NCLoad and Vacon NC633 Engineering Tool all work for required functions with Vacon s micro products. EMC Safety Protections Input voltage Uin 380...480 V, 5 %...+0 % 3~ 208 240 V, 5 %...+0 % ~ 45 66 Hz Input frequency Connection to mains Once per minute or less (normal case) 0...Uin Output voltage Output current Continuous rated current IN at ambient temperature max. +50ºC, overload.5 x IN max. min/0 min Starting current / Current 2 x IN for 2 secs in every 20 sec period torque Torque depends on motor Output frequency 0 320 Hz Frequency resolution 0.0 Hz Frequency Control U/f Control method Open loop sensorless vector control Switching frequency...6 khz; Factory default 6 khz Frequency reference Resolution 0.0 Hz Field weakening point 30 320 Hz Acceleration time 0. 3000 sec Deceleration time 0. 3000 sec Braking torque 00 % x TN with brake ( 400 V,.5 kw) 30 % x TN without brake Ambient ope 0 C (no frost) +50 C: rated loadability IN temperature Storage temperature 40 C +70 C Relative humidity 0 95 % RH, noncondensing, noncorrosive, no dripping water Air quality: chemical vapours IEC 7233, unit in operation, class 3C2 particles IEC 7233, unit in operation, class 3S2 Altitude 00 % load capacity (no de) up to 000 m % de for each 00 m above 000 m; max. 2000 m Vibration 3...50 Hz EN6006826 Displacement amplitude (peak) mm at 3...5.8 Hz Max acceleration amplitude G at 5.8...50 Hz Shock UPS Drop Test (for applicable UPS weights) IEC 68227 Storage and shipping: max 5 G, ms (in package) Enclosure class IP20 Immunity Complies with EN68003 (2004) Emissions 230 V: EMC level H: with an internal RFI filter option 400 V: EMC level H: with an internal RFI filter option 68005, EN60204, CE, UL, cul, IEC (see unit nameplate for more detailed approvals) Overvoltage protection 230 V series: 437 VDC; 400 V series: 874 VDC trip level Undervoltage protection 230 V series: 83 VDC; 400 V series: 333 VDC trip level Earth fault protection Earth fault is tested before every start. In case of earth fault in motor or motor cable, only the frequency converter is protected Unit overtemperature Motor overload Motor stall Motor underload Overcurrent protection, trip limit 4.0 x IN instantaneously
featurerich and compact ac drive Easy installation and commissioning Intelligent menu navigation Small physical size DIN rail and screw mountable Side by side installation Vacon NC633 Engineering Tool for creating customerspecific functionality Parameter upload and download without the need for a mains power supply Extensive hardware Integrated EMC filters make the unit suitable for commercial and industrial networks Available in the enclosure class IP20 as standard, options for IP2 and NEMA Varnished boards as standard Brake chopper as standard in 3~, 400 V,.5 kw and higher Temperaturecontrolled fan Flexible control architecture Modular I/O usage RS485/Modbus as standard PI controller as standard Several fieldbus options External +24 V DC powering to maintain power in the API board and fieldbuses in case the main supply is disconnected Design service for customerspecific API board development Environment friendly RoHS compliant Recyclable materials Energy saving Decreased mechanical stress Reduced noise levels
Vacon Plc Runsorintie 7, 65380 Vaasa, Finland Tel. +358 (0)20 22, Fax +358 (0)20 22 205 www.vacon.com, email: info@vacon.com Vacon Partner BC00245D Subject to changes without notice.