SFP-100M- 155Mbps AM-Multimode ransceiver SFP, Duplex LC Connector, 1310nm LED/FP for Multimode Fiber, ohs Compliant Features ohs Pb Applications Fast Ethernet FDDI AM/SONE OC-3/SDH SM-1 Multimode fiber links Optical-Electrical Interface Conversion 1310nm LED/FP Data ate: 155Mbps, NZ Single +3.3V Power Supply ohs Compliant and Lead-free AC/AC Differential Electrical Interface Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP) Duplex LC Connector Compliance with 100Base-FX of IEEE802.3u Standard Compliance with FDDI PMD Standard Compliance with AM Standard Description he SFP-100M- from AAXEON is the high performance and cost-effective module for serial optical data communication applications specified for multimode of 155 Mb/s. It operates on +3.3V power. he module is intended for multimode fiber, operates at a nominal wavelength of 1310nm, and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly, and an electrical subassembly. All are housed in a plastic package and the combination produces a reliable component. he module is a duplex LC connector transceiver designed to provide an AM/SONE OC-3/SDH SM-1 compliant link for 155 Mb/s short reach applications. he characteristics are performed in accordance with elcordia Specification G-468-COE. EMC Most equipment utilizing high-speed transceivers will be required to meet the following requirements: 1) FCC in the United States 2) CENELEC EN55022 (CISP 22) in Europe o assist the customer in managing the overall equipment EMC performance, the transceivers have been designed to satisfy FCC class B limits and provide good immunity to radio-frequency electromagnetic fields. Eye Safety he transceivers have been designed to meet Class 1 eye safety and comply with EN 60825-1. Page 1 of 5
SFP-100M- 155Mbps AM-Multimode ransceiver Product Information Model Number Operating Voltage & SD Output Distance Wavelength Output Power Sensitivity SFP-100M- 3.3V L AC/AC 2 km 1310 nm -19 ~ -14 dbm -32 dbm ABSOLUE MAX AINGS PAAMEE SYMBOL MIN MAX UNI NOE Storage emperature S -40 85 C Supply Voltage V CC 0 6 V OPEAING CONDIIONS PAAMEE SYMBOL MIN. YP. MAX. UNI NOE Case Operating emperature A -40 85 C Supply Voltage V CC 3.1 3.5 V Data Input Voltage Swing V ID 400 1600 mv ELECICAL CHAACEISICS PAAMEE SYMBOL MIN MAX UNI NOE ransmitter ransmitter Supply Current I CC 140 ma x_ Disable Input Voltage - Low V IL 0 0.8 V x_ Disable Input Voltage - High V IH 2.0 V x_ Fault Output Voltage - Low V OL 0 0.8 V x_ Fault Output Voltage - High V OH 2.0 V eceiver eceiver Supply Current I CC 100 ma eceiver Data Output Differential Voltage V OD 0.4 1.3 V x_los Output Voltage - Low V OL 0 0.8 V x_los Output Voltage - High V OH 2.0 V MOD_DEF (1), MOD_DEF (2) - Low V IL -0.6 0.3 V MOD_DEF (1), MOD_DEF (2) - High V IH 0.7 + 0.5 V ANSMIE ELECO-OPICAL CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE Optical Output Power Po -19-17 -14 dbm 1 Extinction atio E 8.2 db Center Wavelength λ c 1270 1360 nm Spectral Width (FWHM) Δλ 200 nm Optical ise time ( 10%-90% ) t r 3.0 ns p-p Optical Fall time ( 10%-90% ) t f 3.0 ns p-p Output Eye Compliant with IU recommendation G.957 Page 2 of 5
SFP-100M- 155Mbps AM-Multimode ransceiver ECEIVE ELECO-OPICAL CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE Maximum Input Optical Power P max -14 dbm 2 eceiver Sensitivity P min -34-32 dbm 2 Operating Wavelength λ 1100 1600 nm Loss of Signal - Asserted P A -45 dbm Loss of Signal - Deasserted P D -31 dbm Loss of Signal -Hysterisis P D - P A 0.5 db Notes: 1. Measured average power coupled into 62.5/125μm, 0.275 NA graded index multimode fiber. 2. Measured with 2 23-1 PBS at BE<10-10 IMING CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE X_DISABLE Assert ime t_off 10 μs X_DISABLE Negate ime t_on 1 ms ime to initialize, include reset of X_FAUL t_init 300 ms X_FAUL from fault to assertion t_fault 100 μs X_DISABLE time to start reset t_reset 10 μs eceiver Loss of Signal Assert ime (off to on) eceiver Loss of Signal Assert ime (on to off) t A,X_LOS 100 μs t D,X_LOS 100 μs BLOCK DIAGAM OF ANSCEIVE Electrical Sub-assembly D+ D- LED Driver LED X Disable X Fault (0) (1) (2) MOD_DEF Optical Sub-assembly Duplex LC eceptacle D+ Post- D- Pre- X_LOS Page 3 of 5
SFP-100M- 155Mbps AM-Multimode ransceiver PIN OU DIAGAM OF ANSCEIVE 20 1 19 D- 2 x Fault 18 D+ 3 x Disable 17 4 MOD-DEF2 16 V CC 5 MOD-DEF1 15 V CC 6 MOD-DEF0 14 7 ate Select 13 D+ 8 LOS 12 D- 9 11 10 op of Board Buttom of Board (As Viewed through op of Board PIN OU ABLE Pin Symbol Functional Description 1 Vee ransmitter Ground 2 X Fault ransmitter Fault Indication (Not Connected) 3 X Disable ransmitter Disable Module disables on high or open 4 MOD-DEF(2) Module Definition 2 wo wire serial ID interface 5 MOD-DEF(1) Module Definition 1 wo wire serial ID interface 6 MOD-DEF(0) Module Definition 0 Grounded in module 7 ate Select Not Connected 8 LOS Loss of Signal 9 Vee eceiver Ground 10 Vee eceiver Ground 11 Vee eceiver Ground 12 D- Inverse eceived Data Out 13 D+ eceived Data Out 14 Vee eceiver Ground 15 eceiver Power 16 ransmitter Power 17 Vee ransmitter Ground 18 D+ ransmitter Data In 19 D- Inverse ransmitter Data In 20 Vee ransmitter Ground Page 4 of 5
SFP-100M- 155Mbps AM-Multimode ransceiver ECOMMENDED CICUI SCHEMAIC V CC LD Driver GND x_fault x_disable 100 +x_da -x_da V DD V DD C5 C1 -x_da C4 L1 L2 C3 C2 System Pre Post +x_da 100Ω GND x_los EEPOM MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) Note : 4.7KΩ < < 10KΩ L1, L2 = 1mH C2, C4 = 10mF C1, C3, C5 = 0.1mF MECHANICAL DIMENSIONS Units in mm All dimensions are ±0.2mm unless otherwise specified. Page 5 of 5