155Mbps ATM-Single Mode Transceiver

Transcription

1 SFP, Duplex LC Connector, 1310nm FP LD for Single Mode Fiber, ohs Compliant Features 1310nm FP LD Data ate: 155Mbps, NZ Single +3.3V Power Supply ohs Compliant and Lead-free AC/AC Differential Electrical Interface Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP) Applications Fast Ethernet FDDI AM/SONE OC-3/SDH SM-1 Single mode fiber links Optical-Electrical Interface Conversion Compliant with SFF-8472 Digital Diagnostic Monitoring Interface ( optional ) Duplex LC Connector Compliance with 100Base-FX of IEEE802.3u Standard Compliance with FDDI PMD Standard Compliance with AM Standard Description he Mioptics MIO-FE-LX-x series from Metric are high performance and cost-effective modules for serial optical data communication applications specified for single mode of 155 Mb/s. It operates with +3.3V power supply. he module is intended for Single-mode fiber, operates at a nominal wavelength of 1310nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module is integrated digital diagnostics functions via an I 2 C serial interface ( optional ). he module is a duplex LC connector transceiver designed to provide an AM/SONE OC-3/SDH SM-1 compliant link for 155 Mb/s intermediate reach applications. he characteristics are performed in accordance with elcordia Specification G-468-COE. EMC Most equipment utilizing high-speed transceivers will be required to meet the following requirements: 1) FCC in the United States 2) CENELEC EN55022 (CISP 22) in Europe o assist the customer in managing the overall equipment EMC performance, the transceivers have been designed to satisfy FCC class B limits and provide good immunity to radio-frequency electromagnetic fields. Eye Safety he transceivers have been designed to meet Class 1 eye safety and comply with EN

2 Product Information Operating emperature. Model Number & Monitor Function MIO-FE-LX 0~70 MIO-FE-LX-D 0~70 with DOM MIO-FE-LX- -40~85 MIO-FE-LX-D -40~85 with DOM Distance LD ype & Wavelength Output Power Sensitivity 20 km 1310 nm FP -15 ~ -8 dbm -32 dbm ABSOLUE MAX AINGS PAAMEE SYMBOL MIN MAX UNI NOE Storage emperature S Supply Voltage V CC 0 6 V Data Input Voltage V OPEAING CONDIIONS PAAMEE SYMBOL MIN. YP. MAX. UNI NOE Supply Voltage V CC V Data Input Voltage Swing V ID mv ELECICAL CHAACEISICS PAAMEE SYMBOL MIN MAX UNI NOE ransmitter ransmitter Supply Current I CC 200 ma x_ Disable Input Voltage - Low V IL V x_ Disable Input Voltage - High V IH 2.0 V x_ Fault Output Voltage - Low V OL V x_ Fault Output Voltage - High V OH 2.0 V eceiver eceiver Supply Current I CC 100 ma eceiver Data Output Differential Voltage V OD V x_los Output Voltage - Low V OL V x_los Output Voltage - High V OH 2.0 V MOD_DEF (1), MOD_DEF (2) - Low V IL V MOD_DEF (1), MOD_DEF (2) - High V IH V ANSMIE ELECO-OPICAL CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE Optical Output Power Po dbm 1 Extinction atio E 8.2 db Center Wavelength λ c nm Spectral Width (MS) Δλ 7.7 nm Optical ise time ( 10%-90% ) t r 2.0 ns Optical Fall time ( 10%-90% ) t f 2.0 ns Output Eye Compliant with IU recommendation G.957

3 ECEIVE ELECO-OPICAL CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE Maximum Input Optical Power P max -3 dbm 2 eceiver Sensitivity P min -32 dbm 2 Operating Wavelength λ nm Loss of Signal - Asserted P A -45 dbm Loss of Signal - Deasserted P D P A dbm Loss of Signal - Hysteresis P D - P A db Notes: 1. Measured average power coupled into 9/125μm single mode fiber. 2. Measured with PBS at BE<10-10 IMING CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE X_DISABLE Assert ime t_off 10 μs X_DISABLE Negate ime t_on 1 ms ime to initialize, include reset of X_FAUL t_init 300 ms X_FAUL from fault to assertion t_fault 100 μs X_DISABLE time to start reset t_reset 10 μs eceiver Loss of Signal Assert ime (off to on) t A,X_LOS 100 μs eceiver Loss of Signal Assert ime (on to off) t D,X_LOS 100 μs BLOCK DIAGAM OF ANSCEIVE Electrical Sub-assembly D+ D- LD Driver LD X Disable X Fault (0) (1) (2) MOD_DEF Optical Sub-assembly Duplex LC eceptacle D+ Post- D- Pre- X_LOS

4 PIN OU DIAGAM OF ANSCEIVE D- 2 x Fault 18 D+ 3 x Disable 17 4 MOD-DEF2 16 V CC 5 MOD-DEF1 15 V CC 6 MOD-DEF ate Select 13 D+ 8 LOS 12 D op of Board Buttom of Board (As Viewed through op of Board PIN OU ABLE Pin Symbol Functional Description 1 Vee ransmitter Ground 2 X Fault ransmitter Fault Indication 3 X Disable ransmitter Disable Module disables on high or open 4 MOD-DEF(2) Module Definition 2 wo wire serial ID interface 5 MOD-DEF(1) Module Definition 1 wo wire serial ID interface 6 MOD-DEF(0) Module Definition 0 Grounded in module 7 ate Select Not Connected 8 LOS Loss of Signal 9 Vee eceiver Ground 10 Vee eceiver Ground 11 Vee eceiver Ground 12 D- Inverse eceived Data Out 13 D+ eceived Data Out 14 Vee eceiver Ground 15 eceiver Power 16 ransmitter Power 17 Vee ransmitter Ground 18 D+ ransmitter Data In 19 D- Inverse ransmitter Data In 20 Vee ransmitter Ground

5 ECOMMENDED CICUI SCHEMAIC V CC x Fault x Disable LD Driver D+ D- L1 V CC C2 L2 V CC D- C3 C1 System Pre Post D+ 100Ω X_LOS EEPOM MOD-DEF(2) MOD-DEF(1) MOD-DEF(0) Note: 4.7KΩ < < 10KΩ L1, L2 = 1μH C1=10μF C2, C3 = 0.1μ F MECHANICAL DIMENSIONS Units in mm All dimensions are ±0.2mm unless otherwise specified. Claim: Metric reserves the right to make changes in the specification described hereinafter without prior notice.