Hydraulic Power & Control

ydraulic Power & Control Category ydraulic Pumps & Accessories............................................................ 84 Pumps................................................................................. 84 Foot Brackets.......................................................................... 84 Water Pump Strainers, Skimmers, Foot Valves................................................ 85 ydraulic Motors & Accessories........................................................... 86 ydraulic Motors........................................................................ 86 Overhung Load Adapters................................................................. 206 ydrostatic Transmissions................................................................ 207 ydraulic Cylinders & Accessories......................................................... 22 Steering Units & Accessories.............................................................. 27 ydraulic Valves & Accessories........................................................... 220 ydraulic Filters & Accessories............................................................ 423 Power Units & Accessories............................................................... 454 ydraulic System Accessories............................................................. 478 Accumulators & Accessories.............................................................. 478 Meters........................................................................... 480 Gauges............................................................................... 48 Gauge Accessories (Snubbers, Boots)....................................................... 484 Geared Dividers.................................................................... 485 eat Exchangers....................................................................... 487 Pressure Switches...................................................................... 49 igh Force ydraulics.................................................................... 496 Enerpac.............................................................................. 496 Power Team........................................................................... 499 Page ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information. 83

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Category Single ydraulic Pumps Fixed Displacement (Vane)................................................................ 86 Vickers V0/V0F & V20/V20F Vane Pumps (To 9.5 @ 800 )........................ 86 Vickers V Series Vane Pumps (To 90 @ 800. Low Noise, 800 Capability)........ 35 Vickers VQ Series Vane Pumps (To 90 @ 800. igh Speed / igh Pressure Capability).. 36 Miscellaneous Single & Tandem Vane Pumps............................................... 54 Fixed Displacement (Gear)................................................................ 55 aldex Barnes W900 Series (To 3 @ 800 )....................................... 55 ydreco 500K Series (To 22 @ 800 ).......................................... 56 ydreco 500M Series (To 9 @ 800 )......................................... 57 Eaton Series 26 (To 24 @ 800 )................................................. 58 Eaton Series L2 (To 26 @ 800 )................................................. 59 Permco Box Pumps (PTO Pumps) (To 46 @ 800 )................................. 60 Miscellaneous Single Gear Pumps........................................................ 62 Variable Displacement (Piston)............................................................ 63 Vickers PVE Series Piston Pumps (To 2 @ 800 )................................. 63 Vickers PVQ Series Piston Pumps (To 30 @ 800. Low Noise, 800 Capability)..... 64 Eaton Medium Duty Piston Pumps (To 32 @ 800. igh Speed / igh Pressure).......... 66 Eaton 420 Series Mobile Piston Pumps (To 38 @ 800. igh Speed / igh Pressure)...... 68 Double ydraulic Pumps Fixed Displacement (Vane)............................................................... 70 Vickers V200 Series Double Vane Pumps (To 9.5 /0.5 @ 800 )................ 70 Miscellaneous Double Vane Pumps....................................................... 7 Fixed Displacement (Gear)................................................................ 72 Miscellaneous Double Gear Pumps....................................................... 72 Dump Pumps Permco DM400 Series Dump Pumps (To 2.5 @ 800 )................................ 74 Permco DMD/DM640 Series Dump Pumps (To 46 @ 800 )............................. 75 Refuse Pump System Permco Versa-Pak System................................................................ 76 Power Steering Pumps Vickers VTM-42 Power Steering Pumps.................................................... 77 and Pumps Doering Series 24...................................................................... 78 Integrated ydraulics P7 Series.......................................................... 79 Air-Operated Diaphragm Pumps Aro Diaphragm Pumps.................................................................. 80 Centrifugal Pumps ypro Centrifugal Pumps For Agricultural Spray Applications.................................... 82 Pump Accessories Foot Brackets.......................................................................... 84 Water Pump Strainers, Skimmers, Foot Valves................................................ 85 Technical Information, Performance, Dimensions, Model Codes Vane Pumps........................................................................... 53 Vickers Vane Pumps.................................................................. 53 Vickers V0 & V20 Series Vane Pumps................................................... 532 Vickers V200 Series Double Vane Pumps................................................ 536 Vickers V Series Vane Pumps.......................................................... 537 Vickers VQ Series Vane Pumps......................................................... 54 Gear Pumps........................................................................... 546 aldex Barnes W900 Series Pumps....................................................... 546 ydreco 500K Series Gear Pumps...................................................... 547 Page 84

Category ydreco 500M Series Pumps.......................................................... 549 Eaton Series 26 Pumps................................................................. 55 Eaton Series L2 Pumps................................................................. 552 Permco Box Pumps.................................................................... 553 Permco DM400 Series Dump Pumps...................................................... 554 Permco DMD/DM640 Series Dump Pumps................................................. 555 Piston Pumps.......................................................................... 556 Eaton Medium Duty Piston Pumps........................................................ 556 Eaton 420 Series Mobile Piston Pumps.................................................... 557 Vickers PVB Series Piston Pumps........................................................ 558 Vickers PV Series Piston Pumps....................................................... 562 Vickers PVQ Series Piston Pumps....................................................... 564 Diaphragm Pumps...................................................................... 566 Aro Air-Operated Non-Metallic Diaphragm Pumps........................................... 566 Page ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 85

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 Vickers V0 Vane Pumps Mounting Flange: SAE A or SAE B Mounting Flange. Porting: NPT: " NPT, /2" NPT. SAE: -5/6-2 Straight Thread, 3/4-6 Straight Thread. Application Information: page 53 Specifications: page 532 Model Codes: page 533 Dimensions: page 534 Replacement Parts: page 04 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in 24-48 hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers Part No. See Note Above CLD24 38206--B V0-PP-A20 CLD25 38206-5-B Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ V0-PP-A20 CLD26 38206-2-B V0-PP-B20 CLD27 38206-6-B V0-PP-B20 CLD28 38206-3-B V0-PP-C20 CLD29 38206-7-B V0-PP-C20 CLD30 38206-4-B V0-PP-D20 CLD3 38206-8-B V0-PP-D20 CLD32 586376--B V0-PP-2A20 CLD33 586376-5-B V0-PP-2A20 CLD34 586376-2-B V0-PP-2B20 CLD35 586376-6-B V0-PP-2B20 CLD36 586376-3-B V0-PP-2C20 CLD37 586376-7-B V0-PP-2C20 CLD38 586376-4-B V0-PP-2D20 CLD39 586376-8-B V0-PP-2D20 Ring Size 200 800 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 Position Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Rot. C C C C C C C C Max. PSI & Max. 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 86

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 Vickers Part No. See Note Above CLD40 375655--B V0-PP-A20 CLD4 375655-5-B V0-PP-A20 CLD42 375655-2-B V0-PP-B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 Position Port Port 90 C Rot. C Max. PSI & Max. 4800 5.00 4800 5.00 4800 5.00 Pneumatic Power & Control CLD43 375655-6-B V0-PP-B20 CBM57 375655-3 V0-PP-C20 CLD44 375655-3-B V0-PP-C20 CLD45 375655-7-B V0-PP-C20 CLD46 375655-4-B V0-PP-D20 CLD47 375655-8-B V0-PP-D20 CLD48 574768--B V0-PP-38A20 NPT 0.2 0.55 NPT 0.2 0.50 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 90 In-line with inlet (C) 90 90 Port C C C 4800 5.00 4800 0.58 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 Fluid Conveying CLD49 574768-5-B V0-PP-38A20 CLD50 574768-2-B V0-PP-38B20 CLD5 574768-6-B V0-PP-38B20 CLD52 574768-3-B V0-PP-38C20 CLD53 574768-7-B V0-PP-38C20 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 NPT 0.2 0.55 Port 90 C 90 C C C 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 Miscellaneous Products CLD54 574768-4-B V0-PP-38D20 CLD55 574768-8-B V0-PP-38D20 CLF70 58868--B V0-SS-A20 CLF7 58868-5-B V0-SS-A20 CLF72 58868-2-B V0-SS-B20 CLF73 58868-6-B V0-SS-B20 NPT 0.2 0.55 NPT 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 90 90 Port Port 90 C 90 C C C 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 Indexes & Technical Information CLF74 58868-3-B V0-SS-C20 CLF75 58868-7-B V0-SS-C20 CLF76 58868-4-B V0-SS-D20 CLF77 58868-8-B V0-SS-D20 CLF78 452506--B V0-SS-2A20 CLF79 452506-5-B V0-SS-2A20 CLF80 452506-2-B V0-SS-2B20 CLF8 452506-6-B V0-SS-2B20 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 90 90 Port Port 90 C 90 C C C C 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 87

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLF82 452506-3-B V0-SS-2C20 CLF83 452506-7-B V0-SS-2C20 CLF84 452506-4-B V0-SS-2D20 CLF85 452506-8-B V0-SS-2D20 CLF86 386496--B V0-SS-A20 CLF87 386496-5-B V0-SS-A20 CLF88 386496-2-B V0-SS-B20 CLF89 386496-6-B V0-SS-B20 CLF90 386496-3-B V0-SS-C20 CLF9 386496-7-B V0-SS-C20 CLF92 386496-4-B V0-SS-D20 CLF93 386496-8-B V0-SS-D20 CLF94 50385--B V0-SS-38A20 CLF95 50385-5-B V0-SS-38A20 CLF96 50385-2-B V0-SS-38B20 CLF97 50385-6-B V0-SS-38B20 CLF98 50385-3-B V0-SS-38C20 CLF99 50385-7-B V0-SS-38C20 CLG 50385-4-B V0-SS-38D20 CLG2 CLJ32 CLJ40 50385-8-B 79AR00047A -B 79AR00053A -B V0-SS-38D20 V0-6SS-C20 V0-6SS-2C20 CLD56 390902--B V0-P2P-A20 CLD57 390902-5-B V0-P2P-A20 CLD58 390902-2-B V0-P2P-B20 CLD59 390902-6-B V0-P2P-B20 CLD60 390902-3-B V0-P2P-C20 CLD6 Vickers Part No. See Note Above 390902-7-B V0-P2P-C20 CLD62 390902-4-B V0-P2P-D20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 SAE 0.2 0.55 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 Position 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4800 5.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 88

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLD63 390902-8-B V0-P2P-D20 CLD64 452099--B V0-P2P-2A20 CLD65 Vickers Part No. See Note Above 452099-5-B V0-P2P-2A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 Position 90 Port Port Rot. C C Max. PSI & Max. 4500 2.00 4500 2.00 4500 2.00 Pneumatic Power & Control CLD66 452099-2-B V0-P2P-2B20 CLD67 452099-6-B V0-P2P-2B20 CLD68 452099-3-B V0-P2P-2C20 CLD69 452099-7-B V0-P2P-2C20 CLD70 452099-4-B V0-P2P-2D20 CLD7 452099-8-B V0-P2P-2D20 CLD72 39002--B V0-P2P-A20 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 90 C 90 90 90 Port C C C 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 Fluid Conveying CLD73 382075-5-B V0-P2P-A20 CLD74 39002-2-B V0-P2P-B20 CLD75 382075-6-B V0-P2P-B20 CBM72 382075-3 V0-P2P-C20 CLD76 39002-3-B V0-P2P-C20 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 Port 90 C 90 In-line with inlet (C) C C 4500 2.00 4500 2.00 4500 2.00 4500 0.52 4500 2.00 Miscellaneous Products CLD77 382075-7-B V0-P2P-C20 CLD78 39002-4-B V0-P2P-D20 CLD79 382075-8-B V0-P2P-D20 CLD80 574736--B V0-P2P-38A20 CLD8 574736-5-B V0-P2P-38A20 CLD82 574736-2-B V0-P2P-38B20 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 90 90 Port Port 90 C C C C 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 Indexes & Technical Information CLD83 574736-6-B V0-P2P-38B20 CLD84 574736-3-B V0-P2P-38C20 CLD85 574736-7-B V0-P2P-38C20 CLD86 574736-4-B V0-P2P-38D20 CLD87 574736-8-B V0-P2P-38D20 CLG3 382065--B V0-S2S-A20 CLG4 382065-5-B V0-S2S-A20 CLG5 382065-2-B V0-S2S-B20 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 NPT 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 90 90 90 Port Port 90 C C C C C 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 89

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLG6 382065-6-B V0-S2S-B20 CLG7 382065-3-B V0-S2S-C20 CLG8 382065-7-B V0-S2S-C20 CLG9 382065-4-B V0-S2S-D20 CLG20 382065-8-B V0-S2S-D20 CLG29 382063--B V0-S2S-A20 CLG30 382063-5-B V0-S2S-A20 CLG3 382063-2-B V0-S2S-B20 CLG32 382063-6-B V0-S2S-B20 CLG33 382063-3-B V0-S2S-C20 CZ5 382063-7 V0-S2S-C20 CLG34 382063-7-B V0-S2S-C20 CLG35 382063-4-B V0-S2S-D20 CLG36 382063-8-B V0-S2S-D20 CLG37 588684--B V0-S2S-38A20 CLG38 588684-5-B V0-S2S-38A20 CLG39 588684-2-B V0-S2S-38B20 CLG40 588684-6-B V0-S2S-38B20 CLG4 588684-3-B V0-S2S-38C20 CLG42 588684-7-B V0-S2S-38C20 CLG43 588684-4-B V0-S2S-38D20 CLG44 588684-8-B V0-S2S-38D20 CLJ67 02-348752--B V0-6S2S-2A20 CLJ68 02-348752-5-B V0-6S2S-2A20 CLJ69 02-348752-2-B V0-6S2S-2B20 CLJ70 02-348752-6-B V0-6S2S-2B20 CLJ7 02-348752-3-B V0-6S2S-2C20 CLJ72 Vickers Part No. See Note Above 02-348752-7-B V0-6S2S-2C20 CLJ73 02-348752-4-B V0-6S2S-2D20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 SAE 0.4 02 3 Position 90 90 90 Port Port 90 C 90 In-line with inlet (C) 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 0.58 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 4500 2.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 90

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLJ74 02-348752-8-B V0-6S2S-2D20 CLD88 382079--B V0-P3P-A20 CLD89 Vickers Part No. See Note Above 382079-5-B V0-P3P-A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 SAE 0.4 02 3 NPT 0.6 03 4.5 NPT 0.6 03 4.5 Position 90 Port Port Rot. C C Max. PSI & Max. 4500 2.00 4000 2.00 4000 2.00 Pneumatic Power & Control CLD90 382079-2-B V0-P3P-B20 CLD9 382079-6-B V0-P3P-B20 CLD92 382079-3-B V0-P3P-C20 CLD93 382079-7-B V0-P3P-C20 CLD94 382079-4-B V0-P3P-D20 CLD95 382079-8-B V0-P3P-D20 CLD96 382089--B V0-P3P-2A20 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 90 C 90 90 90 Port C C C 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 Fluid Conveying CLD97 382089-5-B V0-P3P-2A20 CLD98 382089-2-B V0-P3P-2B20 CLD99 382089-6-B V0-P3P-2B20 CLE 382089-3-B V0-P3P-2C20 CLE2 382089-7-B V0-P3P-2C20 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 Port 90 C 90 C C C 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 Miscellaneous Products CLE3 382089-4-B V0-P3P-2D20 CLE4 382089-8-B V0-P3P-2D20 CJZ50 382077- V0-P3P-A20 CLE5 382077--B V0-P3P-A20 CLE6 382077-5-B V0-P3P-A20 CLE7 382077-2-B V0-P3P-B20 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 90 90 inlet (A) Port Port 90 C C C 4000 2.00 4000 2.00 4000 0.60 4000 2.00 4000 2.00 4000 2.00 Indexes & Technical Information CLE8 382077-6-B V0-P3P-B20 CLE9 382077-3-B V0-P3P-C20 CBM73 382077-3 V0-P3P-C20 CLE20 382077-7-B V0-P3P-C20 CLE2 382077-4-B V0-P3P-D20 CLE22 382077-8-B V0-P3P-D20 CLE23 393720--B V0-P3P-38A20 CLE24 393720-5-B V0-P3P-38A20 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 90 In-line with inlet (C) 90 90 Port Port C C C C 4000 2.00 4000 2.00 4000 0.52 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 9

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLE25 393720-2-B V0-P3P-38B20 CLE26 393720-6-B V0-P3P-38B20 CLE27 393720-3-B V0-P3P-38C20 CLE28 393720-7-B V0-P3P-38C20 CLE29 393720-4-B V0-P3P-38D20 CLE30 393720-8-B V0-P3P-38D20 CLG45 382069--B V0-S3S-A20 CLG46 382069-5-B V0-S3S-A20 CLG47 382069-2-B V0-S3S-B20 CLG48 382069-6-B V0-S3S-B20 CLG49 382069-3-B V0-S3S-C20 CLG50 382069-7-B V0-S3S-C20 CLG5 382069-4-B V0-S3S-D20 CLG52 382069-8-B V0-S3S-D20 CLG53 397926--B V0-S3S-2A20 CLG54 397926-5-B V0-S3S-2A20 CLG55 397926-2-B V0-S3S-2B20 CLG56 397926-6-B V0-S3S-2B20 CLG57 397926-3-B V0-S3S-2C20 CLG58 397926-7-B V0-S3S-2C20 CLG59 397926-4-B V0-S3S-2D20 CLG60 Vickers Part No. See Note Above 397926-8-B V0-S3S-2D20 CLG6 382067--B V0-S3S-A20 CLG62 382067-5-B V0-S3S-A20 CLG63 382067-2-B V0-S3S-B20 CLG64 382067-6-B V0-S3S-B20 CLG65 382067-3-B V0-S3S-C20 CLG66 382067-7-B V0-S3S-C20 CLG67 382067-4-B V0-S3S-D20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 NPT 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 Position 90 C 90 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 Rot. C C C C C C C C C C C C C C Max. PSI & Max. 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 92

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLG68 382067-8-B V0-S3S-D20 CLG69 502495--B V0-S3S-38A20 CLG70 Vickers Part No. See Note Above 502495-5-B V0-S3S-38A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 Position 90 Port Port Rot. C C Max. PSI & Max. 4000 2.00 4000 2.00 4000 2.00 Pneumatic Power & Control CLG7 502495-2-B V0-S3S-38B20 CLG72 502495-6-B V0-S3S-38B20 CLG73 502495-3-B V0-S3S-38C20 CLG74 502495-7-B V0-S3S-38C20 CLG75 502495-4-B V0-S3S-38D20 CLG76 502495-8-B V0-S3S-38D20 CLJ99 02-347564--B V0-6S3S-2A20 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 90 C 90 90 90 Port C C C 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 Fluid Conveying CLK 02-347564-5-B V0-6S3S-2A20 CLK2 02-347564-2-B V0-6S3S-2B20 CLK3 02-347564-6-B V0-6S3S-2B20 CLK4 02-347564-3-B V0-6S3S-2C20 CLK5 02-347564-7-B V0-6S3S-2C20 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 Port 90 C 90 C C C 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 Miscellaneous Products CLK6 02-347564-4-B V0-6S3S-2D20 CLK7 02-347564-8-B V0-6S3S-2D20 CLK8 02-346503--B V0-6S3S-A20 CLK9 02-346503-5-B V0-6S3S-A20 CLK20 02-346503-2-B V0-6S3S-B20 CLK2 02-346503-6-B V0-6S3S-B20 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 90 90 Port Port 90 C 90 C C C 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 4000 2.00 Indexes & Technical Information CLK22 02-346503-3-B V0-6S3S-C20 CLK23 02-346503-7-B V0-6S3S-C20 CLK24 02-346503-4-B V0-6S3S-D20 CLK25 02-346503-8-B V0-6S3S-D20 CLE3 38355--B V0-P4P-A20 CLE32 38355-5-B V0-P4P-A20 CLE33 38355-2-B V0-P4P-B20 CLE34 38355-6-B V0-P4P-B20 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 SAE 0.6 03 4.5 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 90 90 Port Port 90 C 90 C C C C 4000 2.00 4000 2.00 4000 2.00 4000 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 93

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLE35 38355-3-B V0-P4P-C20 CLE36 38355-7-B V0-P4P-C20 CLE37 38355-4-B V0-P4P-D20 CLE38 38355-8-B V0-P4P-D20 CLE39 40938--B V0-P4P-2A20 CLE40 40938-5-B V0-P4P-2A20 CLE4 40938-2-B V0-P4P-2B20 CLE42 40938-6-B V0-P4P-2B20 CLE43 40938-3-B V0-P4P-2C20 CLE44 40938-7-B V0-P4P-2C20 CLE45 40938-4-B V0-P4P-2D20 CLE46 40938-8-B V0-P4P-2D20 CLE47 382082--B V0-P4P-A20 CLE48 382082-5-B V0-P4P-A20 CLE49 382082-2-B V0-P4P-B20 CLE50 382082-6-B V0-P4P-B20 CLE5 382082-3-B V0-P4P-C20 CBM74 382082-3 V0-P4P-C20 CLE52 382082-7-B V0-P4P-C20 CLE53 382082-4-B V0-P4P-D20 CLE54 382082-8-B V0-P4P-D20 CLE55 59059--B V0-P4P-38A20 CLE56 59059-5-B V0-P4P-38A20 CLE57 59059-2-B V0-P4P-38B20 CLE58 59059-6-B V0-P4P-38B20 CLE59 59059-3-B V0-P4P-38C20 CLE60 59059-7-B V0-P4P-38C20 CLE6 59059-4-B V0-P4P-38D20 CLE62 Vickers Part No. See Note Above 59059-8-B V0-P4P-38D20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 NPT 0.8 04 6 Position 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 In-line with inlet (C) 90 90 Port Port 90 C 90 90 90 Rot. C C C C C C C C C C C C C C Max. PSI & Max. 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400.07 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 94

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLG77 390099--B V0-S4S-A20 CLG78 Vickers Part No. See Note Above 390099-5-B V0-S4S-A20 CLG79 390099-2-B V0-S4S-B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 Position Port Port 90 C Rot. C Max. PSI & Max. 3400 2.00 3400 2.00 3400 2.00 Pneumatic Power & Control CLG80 390099-6-B V0-S4S-B20 CLG8 390099-3-B V0-S4S-C20 CJM27 390099-7 CLG82 390099-7-B V0-S4S-C20 V0-S4S-C20 CLG83 390099-4-B V0-S4S-D20 CLG84 390099-8-B V0-S4S-D20 CLG85 382073--B V0-S4S-2A20 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 90 In-line with inlet (C) 90 90 Port C C C C 3400 2.00 3400 2.00 3400 0.84 3400 2.00 3400 2.00 3400 2.00 3400 2.00 Fluid Conveying CLG86 382073-5-B V0-S4S-2A20 CLG87 382073-2-B V0-S4S-2B20 CLG88 382073-6-B V0-S4S-2B20 CLG89 382073-3-B V0-S4S-2C20 CLG90 382073-7-B V0-S4S-2C20 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 Port 90 C 90 C C C 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 Miscellaneous Products CLG9 382073-4-B V0-S4S-2D20 CLG92 382073-8-B V0-S4S-2D20 CLG93 38207--B V0-S4S-A20 CLG94 38207-5-B V0-S4S-A20 CLG95 38207-2-B V0-S4S-B20 CLG96 38207-6-B V0-S4S-B20 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 90 90 Port Port 90 C 90 C C C 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 Indexes & Technical Information CLG97 38207-3-B V0-S4S-C20 CLG98 38207-7-B V0-S4S-C20 CLG99 38207-4-B V0-S4S-D20 CL 38207-8-B V0-S4S-D20 CL2 574699--B V0-S4S-38A20 CL3 574699-5-B V0-S4S-38A20 CL4 574699-2-B V0-S4S-38B20 CL5 574699-6-B V0-S4S-38B20 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 90 90 Port Port 90 C 90 C C C C 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 95

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CL6 574699-3-B V0-S4S-38C20 CL7 574699-7-B V0-S4S-38C20 CL8 574699-4-B V0-S4S-38D20 CL9 574699-8-B V0-S4S-38D20 CLK42 02-3358--B V0-6S4S-2A20 CLK43 02-3358-5-B V0-6S4S-2A20 CLK44 02-3358-2-B V0-6S4S-2B20 CLK45 02-3358-6-B V0-6S4S-2B20 CLK46 02-3358-3-B V0-6S4S-2C20 CLK47 02-3358-7-B V0-6S4S-2C20 CLK48 02-3358-4-B V0-6S4S-2D20 CLK49 02-3358-8-B V0-6S4S-2D20 CLE63 382085--B V0-P5P-A20 CLE64 382085-5-B V0-P5P-A20 CLE65 382085-2-B V0-P5P-B20 CLE66 382085-6-B V0-P5P-B20 CLE67 382085-3-B V0-P5P-C20 CLE68 382085-7-B V0-P5P-C20 CLE69 382085-4-B V0-P5P-D20 CLE70 382085-8-B V0-P5P-D20 CLE7 40086--B V0-P5P-2A20 CLE72 40086-5-B V0-P5P-2A20 CLE73 40086-2-B V0-P5P-2B20 CLE74 40086-6-B V0-P5P-2B20 CLE75 40086-3-B V0-P5P-2C20 CLE76 40086-7-B V0-P5P-2C20 CLE77 40086-4-B V0-P5P-2D20 CLE78 Vickers Part No. See Note Above 40086-8-B V0-P5P-2D20 CLE79 382084--B V0-P5P-A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 SAE 0.8 04 6 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 Position 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Port Rot. C C C C C C C C C C C C C C Max. PSI & Max. 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3400 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 96

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 Vickers Part No. See Note Above CLE80 382084-5-B V0-P5P-A20 CLE8 382084-2-B V0-P5P-B20 CLE82 382084-6-B V0-P5P-B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 Position Port 90 C 90 Rot. C C Max. PSI & Max. 3200 2.00 3200 2.00 3200 2.00 Pneumatic Power & Control CBM75 382084-3 V0-P5P-C20 CLE83 382084-3-B V0-P5P-C20 CLE84 382084-7-B V0-P5P-C20 CLE85 382084-4-B V0-P5P-D20 CLE86 382084-8-B V0-P5P-D20 CLE87 57629--B V0-P5P-38A20 CLE88 57629-5-B V0-P5P-38A20 NPT.0 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 In-line with inlet (C) 90 90 Port Port C C C 3200.07 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 Fluid Conveying CLE89 57629-2-B V0-P5P-38B20 CLE90 57629-6-B V0-P5P-38B20 CLE9 57629-3-B V0-P5P-38C20 CLE92 57629-7-B V0-P5P-38C20 CLE93 57629-4-B V0-P5P-38D20 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 90 C 90 90 C C 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 Miscellaneous Products CLE94 57629-8-B V0-P5P-38D20 CL20 382092--B V0-S5S-A20 CL2 382092-5-B V0-S5S-A20 CL22 382092-2-B V0-S5S-B20 CL23 382092-6-B V0-S5S-B20 CL24 382092-3-B V0-S5S-C20 NPT 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 90 Port Port 90 C 90 C C C 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 Indexes & Technical Information CL25 382092-7-B V0-S5S-C20 CL26 382092-4-B V0-S5S-D20 CL27 382092-8-B V0-S5S-D20 CL28 382093--B V0-S5S-2A20 CL29 382093-5-B V0-S5S-2A20 CL30 382093-2-B V0-S5S-2B20 CL3 382093-6-B V0-S5S-2B20 CL32 382093-3-B V0-S5S-2C20 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 90 90 Port Port 90 C 90 C C C C 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 97

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CL33 382093-7-B V0-S5S-2C20 CL34 382093-4-B V0-S5S-2D20 CL35 382093-8-B V0-S5S-2D20 CL36 382074--B V0-S5S-A20 CL37 382074-5-B V0-S5S-A20 CL38 382074-2-B V0-S5S-B20 CL39 382074-6-B V0-S5S-B20 CBM7 382074-3 V0-S5S-C20 CL40 382074-3-B V0-S5S-C20 CL4 382074-7-B V0-S5S-C20 CL42 382074-4-B V0-S5S-D20 CL43 382074-8-B V0-S5S-D20 CL44 50307--B V0-S5S-38A20 CL45 50307-5-B V0-S5S-38A20 CL46 50307-2-B V0-S5S-38B20 CL47 50307-6-B V0-S5S-38B20 CL48 50307-3-B V0-S5S-38C20 CL49 50307-7-B V0-S5S-38C20 CL50 50307-4-B V0-S5S-38D20 CL5 50307-8-B V0-S5S-38D20 CLK74 02-346573--B V0-6S5S-2A20 CLK75 02-346573-5-B V0-6S5S-2A20 CLK76 02-346573-2-B V0-6S5S-2B20 CLK77 02-346573-6-B V0-6S5S-2B20 CLK78 02-346573-3-B V0-6S5S-2C20 CLK79 02-346573-7-B V0-6S5S-2C20 CLK80 02-346573-4-B V0-6S5S-2D20 CLK8 Vickers Part No. See Note Above 02-346573-8-B V0-6S5S-2D20 CLE95 38693--B V0-P6P-A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE.0 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 NPT.9 06 9 Position 90 90 Port Port 90 C 90 In-line with inlet (C) 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Port Rot. C C C C C C C C C C C C C C Max. PSI & Max. 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 0.95 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3200 2.00 3000 2.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 98

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLE96 38693-5-B V0-P6P-A20 CLE97 38693-2-B V0-P6P-B20 CLE98 Vickers Part No. See Note Above 38693-6-B V0-P6P-B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 Position Port 90 C 90 Rot. C C Max. PSI & Max. 3000 2.00 3000 2.00 3000 2.00 Pneumatic Power & Control CLE99 38693-3-B V0-P6P-C20 CLF 38693-7-B V0-P6P-C20 CLF2 38693-4-B V0-P6P-D20 CLF3 38693-8-B V0-P6P-D20 CLF4 574644--B V0-P6P-2A20 CLF5 574644-5-B V0-P6P-2A20 CLF6 574644-2-B V0-P6P-2B20 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 90 90 Port Port 90 C C C C 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 Fluid Conveying CLF7 574644-6-B V0-P6P-2B20 CLF8 574644-3-B V0-P6P-2C20 CLF9 574644-7-B V0-P6P-2C20 CLF20 574644-4-B V0-P6P-2D20 CLF2 574644-8-B V0-P6P-2D20 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 90 90 90 C C C 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 Miscellaneous Products CLF22 382086--B V0-P6P-A20 CLF23 382086-5-B V0-P6P-A20 CLF24 382086-2-B V0-P6P-B20 CLF25 382086-6-B V0-P6P-B20 CBM76 382086-3 V0-P6P-C20 CLF26 382086-3-B V0-P6P-C20 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 Port Port 90 C 90 In-line with inlet (C) C C 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000.54 3000 2.00 Indexes & Technical Information CLF27 382086-7-B V0-P6P-C20 CLF28 382086-4-B V0-P6P-D20 CLF29 382086-8-B V0-P6P-D20 CLF30 397945--B V0-P6P-38A20 CLF3 397945-5-B V0-P6P-38A20 CLF32 397945-2-B V0-P6P-38B20 CLF33 397945-6-B V0-P6P-38B20 CLF34 397945-3-B V0-P6P-38C20 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 90 90 Port Port 90 C 90 C C C C 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 99

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLF35 397945-7-B V0-P6P-38C20 CLF36 397945-4-B V0-P6P-38D20 CLF37 397945-8-B V0-P6P-38D20 CL52 382094--B V0-S6S-A20 CL53 382094-5-B V0-S6S-A20 CL54 382094-2-B V0-S6S-B20 CL55 382094-6-B V0-S6S-B20 CL56 382094-3-B V0-S6S-C20 CL57 382094-7-B V0-S6S-C20 CL58 382094-4-B V0-S6S-D20 CL59 382094-8-B V0-S6S-D20 CL60 38756--B V0-S6S-2A20 CL6 38756-5-B V0-S6S-2A20 CL62 38756-2-B V0-S6S-2B20 CL63 38756-6-B V0-S6S-2B20 CL64 38756-3-B V0-S6S-2C20 CL65 38756-7-B V0-S6S-2C20 CL66 38756-4-B V0-S6S-2D20 CL67 38756-8-B V0-S6S-2D20 CL68 387500--B V0-S6S-A20 CL69 387500-5-B V0-S6S-A20 CL70 387500-2-B V0-S6S-B20 CL7 387500-6-B V0-S6S-B20 CL72 387500-3-B V0-S6S-C20 CL73 387500-7-B V0-S6S-C20 CL74 387500-4-B V0-S6S-D20 CL75 387500-8-B V0-S6S-D20 CL76 57978--B V0-S6S-38A20 CL77 Vickers Part No. See Note Above 57978-5-B V0-S6S-38A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 Position 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Port Port Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 00

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CL78 57978-2-B V0-S6S-38B20 CL79 Vickers Part No. See Note Above 57978-6-B V0-S6S-38B20 CL80 57978-3-B V0-S6S-38C20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 Position 90 C 90 Rot. C Max. PSI & Max. 3000 2.00 3000 2.00 3000 2.00 Pneumatic Power & Control CL8 57978-7-B V0-S6S-38C20 CL82 57978-4-B V0-S6S-38D20 CL83 57978-8-B V0-S6S-38D20 CLL7 02-347567--B V0-6S6S-2A20 CLL8 02-347567-5-B V0-6S6S-2A20 CLL9 02-347567-2-B V0-6S6S-2B20 CLL20 02-347567-6-B V0-6S6S-2B20 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 90 90 Port Port 90 C 90 C C C C 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 3000 2.00 Fluid Conveying CLL2 02-347567-3-B V0-6S6S-2C20 CLL22 02-347567-7-B V0-6S6S-2C20 CLL23 02-347567-4-B V0-6S6S-2D20 CLL24 02-347567-8-B V0-6S6S-2D20 CLF38 382062--B V0-P7P-A20 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 NPT.39 07 0.5 90 90 Port C C 3000 2.00 3000 2.00 3000 2.00 3000 2.00 2800 2.00 Miscellaneous Products CLF39 382062-5-B V0-P7P-A20 CLF40 382062-2-B V0-P7P-B20 CLF4 382062-6-B V0-P7P-B20 CLF42 382062-3-B V0-P7P-C20 CLF43 382062-7-B V0-P7P-C20 CLF44 382062-4-B V0-P7P-D20 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 Port 90 C 90 90 C C C 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 Indexes & Technical Information CLF45 382062-8-B V0-P7P-D20 CLF46 408629--B V0-P7P-2A20 CLF47 408629-5-B V0-P7P-2A20 CLF48 408629-2-B V0-P7P-2B20 CLF49 408629-6-B V0-P7P-2B20 CLF50 408629-3-B V0-P7P-2C20 CLF5 408629-7-B V0-P7P-2C20 CLF52 408629-4-B V0-P7P-2D20 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 90 Port Port 90 C 90 90 C C C C 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 0

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CLF53 408629-8-B V0-P7P-2D20 CLF54 382087--B V0-P7P-A20 CLF55 382087-5-B V0-P7P-A20 CLF56 382087-2-B V0-P7P-B20 CLF57 382087-6-B V0-P7P-B20 CE4 382087-3 V0-P7P-C20 CLF58 382087-3-B V0-P7P-C20 CLF59 382087-7-B V0-P7P-C20 CLF60 382087-4-B V0-P7P-D20 CLF6 382087-8-B V0-P7P-D20 CLF62 586405--B V0-P7P-38A20 CLF63 586405-5-B V0-P7P-38A20 CLF64 586405-2-B V0-P7P-38B20 CLF65 586405-6-B V0-P7P-38B20 CLF66 586405-3-B V0-P7P-38C20 CLF67 586405-7-B V0-P7P-38C20 CLF68 586405-4-B V0-P7P-38D20 CLF69 586405-8-B V0-P7P-38D20 CL84 385857--B V0-S7S-A20 CL85 385857-5-B V0-S7S-A20 CL86 385857-2-B V0-S7S-B20 CL87 385857-6-B V0-S7S-B20 CL88 385857-3-B V0-S7S-C20 CL89 385857-7-B V0-S7S-C20 CL90 385857-4-B V0-S7S-D20 CL9 385857-8-B V0-S7S-D20 CL92 40055--B V0-S7S-2A20 CL93 Vickers Part No. See Note Above 40055-5-B V0-S7S-2A20 CL94 40055-2-B V0-S7S-2B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size 200 800 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 Position 90 Port Port 90 C 90 In-line with inlet (C) 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 Port Port 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max. 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800.42 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 02

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Pumps & Accessories Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 CL95 40055-6-B V0-S7S-2B20 CL96 40055-3-B V0-S7S-2C20 CL97 40055-7-B V0-S7S-2C20 CL98 40055-4-B V0-S7S-2D20 CL99 40055-8-B V0-S7S-2D20 CLJ 382095--B V0-S7S-A20 CLJ2 382095-5-B V0-S7S-A20 CLJ3 382095-2-B V0-S7S-B20 CLJ4 382095-6-B V0-S7S-B20 CLJ5 382095-3-B V0-S7S-C20 CLJ6 382095-7-B V0-S7S-C20 CLJ7 382095-4-B V0-S7S-D20 CLJ8 382095-8-B V0-S7S-D20 CLJ9 452380--B V0-S7S-38A20 CLJ20 452380-5-B V0-S7S-38A20 CLJ2 452380-2-B V0-S7S-38B20 CLJ22 452380-6-B V0-S7S-38B20 CLJ23 452380-3-B V0-S7S-38C20 CLJ24 452380-7-B V0-S7S-38C20 CLJ25 452380-4-B V0-S7S-38D20 CLJ26 CLL53 Vickers Part No. See Note Above 452380-8-B 79AR00056A -B 79AR0004A -B V0-S7S-38D20 V0-6S7S-2C20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 90 90 90 Port Port 90 C 90 90 90 Port Port 90 C 90 90 90 C C C C C C C C C C C 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 2800 2.00 CLL54 V0-6S7S-2C20 SAE.39 07 0.5 C Note: : @ 800 & 00 PSI. Displacement: Cubic inches per revolution. Max PSI & Max based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Min Speed: 600. Ring Size 200 800 Position Rot. Max. PSI & Max. 03

Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 Parts for Vickers V0 Vane Pumps Parts for Vickers V0 Vane Pumps Vickers Model Description CAK63 48423 Bearing 0.6 CLB42 352699 Body, SAE-A, " NPT CLB39 37668 Body. SAE-A, Straight Thread CLB52 452305 Body, SAE-B, Straight Thread CCC33 92347 Cartridge Kit, Ring Size 0.3 CCC32 923470 Cartridge Kit, Ring Size 02.33 CCC35 923496 Cartridge Kit, Ring Size 03.30 CCC3 923469 Cartridge Kit, Ring Size 04.82 CCC30 923468 Cartridge Kit, Ring Size 05.79 CCC36 923497 Cartridge Kit, Ring Size 06 2.23 CCC37 923498 Cartridge Kit, Ring Size 07 2.20 CLB44 372863 Port, " NPT CLB45 372865 Port, Straight Thread CAB5 002460 Pin for Pumps with Ring Size 0 02 03 0.0 CAD66 039640 Pin for Pumps with Ring Size 04 05 0.5 CAB97 06662 Pin for Pumps with Ring Size 06 07 0.02 CJZ38 374343 Pressure Plate Sub Assy 0.67 CLA92 0664 Retaining Ring CLA90 08754 Retaining Ring CAB92 056 Bolts for Pumps with Ring Size 0 02 03 0. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 04

ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 0.5 @ 800 Parts for Vickers V0 Vane Pumps Vickers Model Description CAA63 00278 Bolts for Pumps with Ring Size 04 05 06 07 0.2 CCC38 923548 Seal Kit, Buna-N 0.04 CBM54 374338 # Shaft, 3/4" Straight 0.43 CBM55 374339 # Shaft, 0.32 CE6 38748 #38 Shft, Tooth 0.35 CBM56 375480 #2 Shaft, 0.44 CAK6 42843 Shaft Key, 3/6 x 0.0 CB93 263585 Shaft Seal, Buna-N 0.02 CLB40 345262 Spring Indexes & Technical Information Miscellaneous Products Fluid Conveying 05

Single ydraulic Pumps Fixed Displacement Vickers V0F Series Vane Pumps To 0.5 @ 800 Vickers V0F Vane Pumps Control Cover The Control Cover limits flow to the operating system to the desired maximum. Excess flow is diverted to tank. A relief valve is included that limits maximum system pressure. Unless noted otherwise, all pumps have: SAE A Mounting Flange. " NPT, 3/4-6 St.Thd., /2" NPT Tank. Application Information: page 53 Specifications: page 532 Model Codes: page 533 Dimensions: page 534 Replacement Parts: page 06 Foot Brackets: page 84 Pumps are stocked as shown in table. ANY inlet position and rotation is available for same-day shipment. See Model Codes page to select a different model code. Vickers Part No. See Note Above CBW8 595-3 V0F-P4P-C4D20 CEW7 02-466580- Vickers V0F Vane Pumps Control Cover Vickers Model See Note Above Shaft Displ V0F-S4T-A4E20 (SAE-6 inlet, SAE-8 outlet & tank) CAD43 02-306253- V0F-P4P-A4D20 C50 02-466554- V0F-S4T-A4E-20 (SAE-6 inlet, SAE-8 outlet & tank) Ring Size 200 0.80 04 0.80 04 0.80 04 0.80 04 Rate & Relief Setting Position 4.0 In-line with 000 PSI inlet (C) 4.0 250 PSI 4.0 000 PSI 4.0 250 PSI inlet (A) inlet (A) inlet (A) Rate: Orifice Rate (). Non-adjustable pressure compensated fixed orifice in rear cover. Relief Setting: Non-adjustable replaceable cartridge. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Vickers Part No. Vickers Model 595-3 V0F-P4P-C4D20 04 02-34777 Rot. Max. PSI & Max. 3400 2.75 3400 2.75 3400 2.67 3400 2.32 Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit 374338 3/4"-Straight- 42843 263585 923548 374338 3/4"-Straig 42843 263585 ht- 374339 9Tooth-SAE-A- -- 263585 923548 374339 9Tooth-SAE-A- -- 263585 923548 02-466580- V0F-S4T-A4E-20 04 923469 R923469 02-306253- V0F-P4P-A4D20 04 02-34777 02-466554- V0F-S4T-A4E-20 04 02-34777 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 06

ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0F Series Vane Pumps To 0.5 @ 800 Vickers V0F Vane Pumps Replacement Parts List Part Number Description CCC33 92347 Cartridge Kit, Ring Size 0.3 CCC32 923470 Cartridge Kit, Ring Size 02.33 CCC35 923496 Cartridge Kit, Ring Size 03.30 CCC3 923469 Cartridge Kit, Ring Size 04.82 CCC30 923468 Cartridge Kit, Ring Size 05.79 CCC36 923497 Cartridge Kit, Ring Size 06 2.23 CCC37 923498 Cartridge Kit, Ring Size 07 2.20 CJZ38 374343 Pressure Plate Sub Assy 0.67 CCC38 923548 Seal Kit, Buna-N 0.04 CB93 263585 Shaft Seal, Buna-N 0.02 CBM54 374338 # Shaft, 3/4" Straight 0.43 CBM55 374339 # Shaft, 9Tooth SAE A 0.32 CBM56 375480 #2 Shaft, 3Tooth SAE B 0.44 CE6 38748 #38 Shaft, Tooth 0.35 CAK6 42843 Shaft Key, 3/6 x 0.0 Indexes & Technical Information Miscellaneous Products Fluid Conveying 07

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 Vickers V20 Vane Pumps Mounting Flange: SAE A or SAE B Ports: -/4" NPT inlet and 3/4" NPT outlet, or -5/8"-2 SAE inlet and -/6"-2 outlet. Application Information: page 53 Specifications: page 532 Model Codes: page 533 Dimensions: page 535 Replacement Parts: page 3 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations are available for delivery in 24-48 hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers Part No. See Note Above CLN23 02-43242--B V20-P5P-A CLN24 Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth 02-43242-5-B V20-P5P-A CLN25 02-43242-2-B V20-P5P-B CLN26 02-43242-6-B V20-P5P-B CLN27 02-43242-3-B V20-P5P-C CLN28 02-43242-7-B V20-P5P-C CLN29 02-43242-4-B V20-P5P-D CLN30 02-43242-8-B V20-P5P-D CLN3 02-322277--B V20-P5P-5A CLN32 02-322277-5-B V20-P5P-5A CLN33 02-322277-2-B V20-P5P-5B CLN34 02-322277-6-B V20-P5P-5B CLN35 02-322277-3-B V20-P5P-5C CLN36 02-322277-7-B V20-P5P-5C CLN37 02-322277-4-B V20-P5P-5D CLN38 02-322277-8-B V20-P5P-5D Tooth Tooth Tooth Tooth Tooth Tooth Tooth Ring Size 200 800 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 NPT 05 7.5 Position 90 C 90 C 90 90 90 C 90 C 90 90 Rot. C C C C C C C C Max. PSI & Max. 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 08

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLN39 875445--B V20-P5P-A 3/4 Stright NPT 05 7.5 CLN40 Vickers Part No. See Note Above 875445-5-B V20-P5P-A- L Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 800 3/4 Stright NPT 05 7.5 CLN4 875445-2-B V20-P5P-B 3/4 Stright NPT 05 7.5 Position 90 C Rot. C Max. PSI & Max. 3400 6.00 3400 6.00 3400 6.00 Pneumatic Power & Control CLN42 875445-6-B V20-P5P-B- L 3/4 Stright NPT 05 7.5 CLN43 875445-3-B V20-P5P-C 3/4 Stright NPT 05 7.5 CLN44 875445-7-B V20-P5P-C- L 3/4 Stright NPT 05 7.5 CLN45 875445-4-B V20-P5P-D 3/4 Stright NPT 05 7.5 CLN46 875445-8-B V20-P5P-D- L 3/4 Stright NPT 05 7.5 CLR60 02-34527--B V20-S5S-A 3/4 Stright SAE 05 7.5 CLR6 02-34527-5-B V20-S5S-A- L 3/4 Stright SAE 05 7.5 90 C 90 90 C C C C 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 Fluid Conveying CLR62 02-34527-2-B V20-S5S-B 3/4 Stright SAE 05 7.5 CLR63 02-34527-6-B V20-S5S-B- L 3/4 Stright SAE 05 7.5 CLR64 02-34527-3-B V20-S5S-C 3/4 Stright SAE 05 7.5 CLR65 02-34527-7-B V20-S5S-C- L 3/4 Stright SAE 05 7.5 CLR66 02-34527-4-B V20-S5S-D 3/4 Stright SAE 05 7.5 90 C 90 C 90 C C 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 Miscellaneous Products CLR67 02-34527-8-B V20-S5S-D- L CLU77 CLU78 720AR00005A- B 720AR00004A- B V20-6S5S-5C V20-6S5S-5C L 3/4 Stright SAE 05 7.5 SAE 05 7.5 SAE 05 7.5 CLU8 02-3348--B V20-6S5S-A 3/4 Stright SAE 05 7.5 CLU82 02-3348-5-B V20-6S5S-A- L 3/4 Stright SAE 05 7.5 CLU83 02-3348-2-B V20-6S5S-B 3/4 Stright SAE 05 7.5 90 90 C C C C 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 Indexes & Technical Information CLU84 02-3348-6-B V20-6S5S-B- L 3/4 Stright SAE 05 7.5 CLU85 02-3348-3-B V20-6S5S-C 3/4 Stright SAE 05 7.5 CLU86 02-3348-7-B V20-6S5S-C- L 3/4 Stright SAE 05 7.5 CLU87 02-3348-4-B V20-6S5S-D 3/4 Stright SAE 05 7.5 CLU88 02-3348-8-B V20-6S5S-D- L CLN55 372746--B V20-P6P-A CLN56 372746-5-B V20-P6P-A CLN57 372746-2-B V20-P6P-B 3/4 Stright SAE 05 7.5 Tooth Tooth Tooth NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 90 C 90 90 90 C C C C C 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 09

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLN58 372746-6-B V20-P6P-B CLN59 372746-3-B V20-P6P-C CLN60 372746-7-B V20-P6P-C CLN6 372746-4-B V20-P6P-D CLN62 372746-8-B V20-P6P-D CLN63 385535--B V20-P6P-5A CLN64 385535-5-B V20-P6P-5A CLN65 385535-2-B V20-P6P-5B CLN66 385535-6-B V20-P6P-5B CLN67 385535-3-B V20-P6P-5C CLN68 385535-7-B V20-P6P-5C CLN69 385535-4-B V20-P6P-5D CLN70 385535-8-B V20-P6P-5D Tooth Tooth Tooth Tooth Tooth NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 CJZ3 37263- V20-P6P-A NPT.9 06 9 CLN7 37263--B V20-P6P-A 3/4 Stright NPT.9 06 9 CLN72 37263-5-B V20-P6P-A- L 3/4 Stright NPT.9 06 9 CLN73 37263-2-B V20-P6P-B 3/4 Stright NPT.9 06 9 CLN74 37263-6-B V20-P6P-B- L 3/4 Stright NPT.9 06 9 CBM50 37263-3 V20-P6P-C NPT.9 06 9 CLN75 37263-3-B V20-P6P-C 3/4 Stright NPT.9 06 9 CLN76 37263-7-B V20-P6P-C- L 3/4 Stright NPT.9 06 9 CLN77 37263-4-B V20-P6P-D 3/4 Stright NPT.9 06 9 CLN78 37263-8-B V20-P6P-D- L CLN79 389463--B V20-P6P-38A CLN80 389463-5-B V20-P6P-38A CLN8 389463-2-B V20-P6P-38B CLN82 389463-6-B V20-P6P-38B CLN83 389463-3-B V20-P6P-38C CLN84 Vickers Part No. See Note Above 389463-7-B V20-P6P-38C Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright NPT.9 06 9 Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Ring Size 200 800 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 NPT.9 06 9 Position 90 C 90 90 90 C 90 C 90 90 inlet (A) 90 C 90 C In-line with inlet (C) 90 90 90 C 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max. 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 5.8 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 5.47 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 0

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLN85 389463-4-B V20-P6P-38D CLN86 Vickers Part No. See Note Above 389463-8-B V20-P6P-38D CLR76 372594--B V20-S6S-A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth - Tooth - Tooth Ring Size 200 800 NPT.9 06 9 NPT.9 06 9 SAE.9 06 9 Position 90 90 Rot. C Max. PSI & Max. 3400 6.00 3400 6.00 3400 6.00 Pneumatic Power & Control CLR77 372594-5-B V20-S6S-A CLR78 372594-2-B V20-S6S-B CLR79 372594-6-B V20-S6S-B CLR80 372594-3-B V20-S6S-C CLR8 372594-7-B V20-S6S-C CLR82 372594-4-B V20-S6S-D CLR83 372594-8-B V20-S6S-D Tooth Tooth Tooth Tooth Tooth Tooth Tooth SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 90 C 90 C 90 90 C C C C 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 Fluid Conveying CLR84 385520--B V20-S6S-5A CLR85 385520-5-B V20-S6S-5A CLR86 385520-2-B V20-S6S-5B CLR87 385520-6-B V20-S6S-5B CLR88 385520-3-B V20-S6S-5C SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 90 C 90 C C C 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 Miscellaneous Products CLR89 385520-7-B V20-S6S-5C CLR90 385520-4-B V20-S6S-5D CLR9 385520-8-B V20-S6S-5D SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 CLR92 372585--B V20-S6S-A 3/4 Stright SAE.9 06 9 CLR93 372585-5-B V20-S6S-A- L 3/4 Stright SAE.9 06 9 CLR94 372585-2-B V20-S6S-B 3/4 Stright SAE.9 06 9 90 90 90 C C C C 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 Indexes & Technical Information CLR95 372585-6-B V20-S6S-B- L 3/4 Stright SAE.9 06 9 CLR96 372585-3-B V20-S6S-C 3/4 Stright SAE.9 06 9 CLR97 372585-7-B V20-S6S-C- L 3/4 Stright SAE.9 06 9 CLR98 372585-4-B V20-S6S-D 3/4 Stright SAE.9 06 9 CLR99 372585-8-B V20-S6S-D- L CLS 48930--B V20-S6S-38A CLS2 48930-5-B V20-S6S-38A CLS3 48930-2-B V20-S6S-38B 3/4 Stright SAE.9 06 9 Tooth - Tooth - Tooth - SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 90 C 90 90 90 C C C C C 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLS4 48930-6-B V20-S6S-38B CLS5 48930-3-B V20-S6S-38C CLS6 48930-7-B V20-S6S-38C CLS7 48930-4-B V20-S6S-38D CLS8 CLV4 CLV5 48930-8-B 720AR0004A- B 720AR0005A- B V20-S6S-38D V20-6S6S-D V20-6S6S-D CLV6 02-02226--B V20-6S6S-5A CLV7 02-02226-5-B V20-6S6S-5A CLV8 02-02226-2-B V20-6S6S-5B CLV9 02-02226-6-B V20-6S6S-5B CLV20 02-02226-3-B V20-6S6S-5C CLV2 02-02226-7-B V20-6S6S-5C CLV22 02-02226-4-B V20-6S6S-5D CLV23 02-02226-8-B V20-6S6S-5D CLN87 39922--B V20-P7P-A CLN88 39922-5-B V20-P7P-A CLN89 39922-2-B V20-P7P-B CLN90 39922-6-B V20-P7P-B CLN9 39922-3-B V20-P7P-C CLN92 39922-7-B V20-P7P-C CLN93 39922-4-B V20-P7P-D CLN94 39922-8-B V20-P7P-D CLN95 3937--B V20-P7P-5A CLN96 3937-5-B V20-P7P-5A CLN97 3937-2-B V20-P7P-5B CLN98 3937-6-B V20-P7P-5B CLN99 3937-3-B V20-P7P-5C CLP Vickers Part No. See Note Above 3937-7-B V20-P7P-5C Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth - Tooth - Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth Ring Size 200 800 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 SAE.9 06 9 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 Position 90 C 90 90 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3400 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 2

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLP2 3937-4-B V20-P7P-5D CLP3 Vickers Part No. See Note Above 3937-8-B V20-P7P-5D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 800 NPT.39 07 0.5 NPT.39 07 0.5 CLP4 394450--B V20-P7P-A 3/4 Stright NPT.39 07 0.5 Position 90 90 Rot. C Max. PSI & Max. 3000 6.00 3000 6.00 3000 6.00 Pneumatic Power & Control CLP5 394450-5-B V20-P7P-A- L 3/4 Stright NPT.39 07 0.5 CLP6 394450-2-B V20-P7P-B 3/4 Stright NPT.39 07 0.5 CLP7 394450-6-B V20-P7P-B- L 3/4 Stright NPT.39 07 0.5 CLP8 394450-3-B V20-P7P-C 3/4 Stright NPT.39 07 0.5 CBN8 394450-3 V20-P7P-C NPT.39 07 0.5 CLP9 394450-7-B V20-P7P-C- L 3/4 Stright NPT.39 07 0.5 CLP20 394450-4-B V20-P7P-D 3/4 Stright NPT.39 07 0.5 90 C 90 C In-line with inlet (C) 90 C C C 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.65 3000 6.00 3000 6.00 Fluid Conveying CLP2 394450-8-B V20-P7P-D- L CLP22 43789--B V20-P7P-38A CLP23 43789-5-B V20-P7P-38A CLP24 43789-2-B V20-P7P-38B CLP25 43789-6-B V20-P7P-38B 3/4 Stright NPT.39 07 0.5 Tooth - Tooth - Tooth - Tooth - NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 90 90 C 90 C C C C 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 Miscellaneous Products CLP26 43789-3-B V20-P7P-38C CLP27 43789-7-B V20-P7P-38C CLP28 43789-4-B V20-P7P-38D CLP29 43789-8-B V20-P7P-38D CLS9 40088--B V20-S7S-A CLS20 40088-5-B V20-S7S-A Tooth - Tooth - Tooth - Tooth - Tooth Tooth NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 NPT.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 90 90 C C C 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 Indexes & Technical Information CLS2 40088-2-B V20-S7S-B CLS22 40088-6-B V20-S7S-B CLS23 40088-3-B V20-S7S-C CLS24 40088-7-B V20-S7S-C CLS25 40088-4-B V20-S7S-D CLS26 40088-8-B V20-S7S-D CLS27 574677--B V20-S7S-5A CLS28 574677-5-B V20-S7S-5A Tooth Tooth Tooth Tooth Tooth Tooth SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 90 C 90 C 90 90 C C C C 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLS29 574677-2-B V20-S7S-5B CLS30 574677-6-B V20-S7S-5B CLS3 574677-3-B V20-S7S-5C CLS32 574677-7-B V20-S7S-5C CLS33 574677-4-B V20-S7S-5D CLS34 574677-8-B V20-S7S-5D SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 CLS35 39379--B V20-S7S-A 3/4 Stright SAE.39 07 0.5 CLS36 39379-5-B V20-S7S-A- L 3/4 Stright SAE.39 07 0.5 CLS37 39379-2-B V20-S7S-B 3/4 Stright SAE.39 07 0.5 CLS38 39379-6-B V20-S7S-B- L 3/4 Stright SAE.39 07 0.5 CLS39 39379-3-B V20-S7S-C 3/4 Stright SAE.39 07 0.5 CLS40 39379-7-B V20-S7S-C- L 3/4 Stright SAE.39 07 0.5 CLS4 39379-4-B V20-S7S-D 3/4 Stright SAE.39 07 0.5 CLS42 39379-8-B V20-S7S-D- L CLS43 02-334748--B V20-S7S-38A CLS44 02-334748-5-B V20-S7S-38A CLS45 02-334748-2-B V20-S7S-38B CLS46 02-334748-6-B V20-S7S-38B CLS47 02-334748-3-B V20-S7S-38C CLS48 02-334748-7-B V20-S7S-38C CLS49 02-334748-4-B V20-S7S-38D CLS50 02-334748-8-B V20-S7S-38D CLV48 478057--B V20-6S7S-5A CLV49 478057-5-B V20-6S7S-5A CLV50 478057-2-B V20-6S7S-5B CLV5 478057-6-B V20-6S7S-5B CLV52 478057-3-B V20-6S7S-5C CLV53 Vickers Part No. See Note Above 478057-7-B V20-6S7S-5C CLV54 478057-4-B V20-6S7S-5D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright SAE.39 07 0.5 Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Ring Size 200 800 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 SAE.39 07 0.5 Position 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 Rot. C C C C C C C C C C C C C C Max. PSI & Max. 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 3000 6.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 4

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLV55 478057-8-B V20-6S7S-5D CLP30 372756--B V20-P8P-A CLP3 Vickers Part No. See Note Above 372756-5-B V20-P8P-A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth Tooth Ring Size 200 800 SAE.39 07 0.5 NPT.62 08 2 NPT.62 08 2 Position 90 Rot. C C Max. PSI & Max. 3000 6.00 Pneumatic Power & Control CLP32 372756-2-B V20-P8P-B CLP33 372756-6-B V20-P8P-B CLP34 372756-3-B V20-P8P-C CLP35 372756-7-B V20-P8P-C CLP36 372756-4-B V20-P8P-D CLP37 372756-8-B V20-P8P-D CLP38 372736--B V20-P8P-5A Tooth Tooth Tooth Tooth Tooth Tooth NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 90 C 90 C 90 90 C C C Fluid Conveying CLP39 372736-5-B V20-P8P-5A CLP40 372736-2-B V20-P8P-5B CLP4 372736-6-B V20-P8P-5B CLP42 372736-3-B V20-P8P-5C CLP43 372736-7-B V20-P8P-5C NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 90 C 90 C C C C Miscellaneous Products CLP44 372736-4-B V20-P8P-5D CLP45 372736-8-B V20-P8P-5D NPT.62 08 2 NPT.62 08 2 CLP46 372639--B V20-P8P-A 3/4 Stright NPT.62 08 2 CJZ34 372639- V20-P8P-A NPT.62 08 2 CLP47 372639-5-B V20-P8P-A- L 3/4 Stright NPT.62 08 2 CLP48 372639-2-B V20-P8P-B 3/4 Stright NPT.62 08 2 90 90 inlet (A) 90 C C C 2800 6.66 Indexes & Technical Information CLP49 372639-6-B V20-P8P-B- L 3/4 Stright NPT.62 08 2 CBM52 372639-3 V20-P8P-C NPT.62 08 2 CLP50 372639-3-B V20-P8P-C 3/4 Stright NPT.62 08 2 CLP5 372639-7-B V20-P8P-C- L 3/4 Stright NPT.62 08 2 CLP52 372639-4-B V20-P8P-D 3/4 Stright NPT.62 08 2 CLP53 372639-8-B V20-P8P-D- L CLP54 433338--B V20-P8P-38A CLP55 433338-5-B V20-P8P-38A 3/4 Stright NPT.62 08 2 Tooth - Tooth - NPT.62 08 2 NPT.62 08 2 90 C In-line with inlet (C) 90 90 C C C C 2800 6.57 5

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLP56 433338-2-B V20-P8P-38B CLP57 433338-6-B V20-P8P-38B CLP58 433338-3-B V20-P8P-38C CLP59 433338-7-B V20-P8P-38C CLP60 433338-4-B V20-P8P-38D CLP6 433338-8-B V20-P8P-38D CLS5 385533--B V20-S8S-A CLS52 385533-5-B V20-S8S-A CLS53 385533-2-B V20-S8S-B CLS54 385533-6-B V20-S8S-B CLS55 385533-3-B V20-S8S-C CLS56 385533-7-B V20-S8S-C CLS57 385533-4-B V20-S8S-D CLS58 385533-8-B V20-S8S-D CLS59 373670--B V20-S8S-5A CLS60 373670-5-B V20-S8S-5A CLS6 373670-2-B V20-S8S-5B CLS62 373670-6-B V20-S8S-5B CLS63 373670-3-B V20-S8S-5C CLS64 373670-7-B V20-S8S-5C CLS65 373670-4-B V20-S8S-5D CLS66 373670-8-B V20-S8S-5D Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 NPT.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 CLS67 372564--B V20-S8S-A 3/4 Stright SAE.62 08 2 CLS68 372564-5-B V20-S8S-A- L 3/4 Stright SAE.62 08 2 CLS69 372564-2-B V20-S8S-B 3/4 Stright SAE.62 08 2 CLS70 372564-6-B V20-S8S-B- L 3/4 Stright SAE.62 08 2 CLS7 372564-3-B V20-S8S-C 3/4 Stright SAE.62 08 2 CLS72 Vickers Part No. See Note Above 372564-7-B V20-S8S-C- L Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 3/4 Stright SAE.62 08 2 CLS73 372564-4-B V20-S8S-D 3/4 Stright SAE.62 08 2 800 Position 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 Rot. C C C C C C C C C C C C C C Max. PSI & Max. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 6

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLS74 372564-8-B V20-S8S-D- L CLS75 576970--B V20-S8S-38A CLS76 Vickers Part No. See Note Above 576970-5-B V20-S8S-38A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright SAE.62 08 2 Tooth - Tooth - Ring Size 200 800 SAE.62 08 2 SAE.62 08 2 Position 90 Rot. C C Max. PSI & Max. Pneumatic Power & Control CLS77 576970-2-B V20-S8S-38B CLS78 576970-6-B V20-S8S-38B CLS79 576970-3-B V20-S8S-38C CLS80 576970-7-B V20-S8S-38C CLS8 576970-4-B V20-S8S-38D CLS82 576970-8-B V20-S8S-38D CLV80 02-5574--B V20-6S8S-5A Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 90 C 90 C 90 90 C C C Fluid Conveying CLV8 02-5574-5-B V20-6S8S-5A CLV82 02-5574-2-B V20-6S8S-5B CLV83 02-5574-6-B V20-6S8S-5B CLV84 02-5574-3-B V20-6S8S-5C CLV85 02-5574-7-B V20-6S8S-5C SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 SAE.62 08 2 90 C 90 C C C C Miscellaneous Products CLV86 02-5574-4-B V20-6S8S-5D CLV87 02-5574-8-B V20-6S8S-5D SAE.62 08 2 SAE.62 08 2 CLV88 02-466262--B V20-6S8S-A 3/4 Stright SAE.62 08 2 CLV89 02-466262-5-B V20-6S8S-A- L 3/4 Stright SAE.62 08 2 CLV90 02-466262-2-B V20-6S8S-B 3/4 Stright SAE.62 08 2 CLV9 02-466262-6-B V20-6S8S-B- L 3/4 Stright SAE.62 08 2 90 90 90 C 90 C C C C Indexes & Technical Information CLV92 02-466262-3-B V20-6S8S-C 3/4 Stright SAE.62 08 2 CLV93 02-466262-7-B V20-6S8S-C- L 3/4 Stright SAE.62 08 2 CLV94 02-466262-4-B V20-6S8S-D 3/4 Stright SAE.62 08 2 CLV95 02-466262-8-B V20-6S8S-D- L CLP62 383526--B V20-P9P-A CLP63 383526-5-B V20-P9P-A CLP64 383526-2-B V20-P9P-B CLP65 383526-6-B V20-P9P-B 3/4 Stright SAE.62 08 2 Tooth Tooth Tooth Tooth NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 90 90 90 C 90 C C C C C 7

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLP66 383526-3-B V20-P9P-C CLP67 383526-7-B V20-P9P-C CLP68 383526-4-B V20-P9P-D CLP69 383526-8-B V20-P9P-D CLP70 407502--B V20-P9P-5A CLP7 407502-5-B V20-P9P-5A CLP72 407502-2-B V20-P9P-5B CLP73 407502-6-B V20-P9P-5B CLP74 407502-3-B V20-P9P-5C CLP75 407502-7-B V20-P9P-5C CLP76 407502-4-B V20-P9P-5D CLP77 407502-8-B V20-P9P-5D Tooth Tooth Tooth Tooth NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 CJZ7 358357- V20-P9P-A NPT.8 09 3.5 CLP78 358357--B V20-P9P-A 3/4 Stright NPT.8 09 3.5 CLP79 358357-5-B V20-P9P-A- L 3/4 Stright NPT.8 09 3.5 CLP80 358357-2-B V20-P9P-B 3/4 Stright NPT.8 09 3.5 CLP8 358357-6-B V20-P9P-B- L 3/4 Stright NPT.8 09 3.5 CBM45 358357-3 V20-P9P-C NPT.8 09 3.5 CLP82 358357-3-B V20-P9P-C 3/4 Stright NPT.8 09 3.5 CLP83 358357-7-B V20-P9P-C- L 3/4 Stright NPT.8 09 3.5 CLP84 358357-4-B V20-P9P-D 3/4 Stright NPT.8 09 3.5 CLP85 358357-8-B V20-P9P-D- L CLP86 424838--B V20-P9P-38A CLP87 424838-5-B V20-P9P-38A CLP88 424838-2-B V20-P9P-38B CLP89 424838-6-B V20-P9P-38B CLP90 424838-3-B V20-P9P-38C CLP9 Vickers Part No. See Note Above 424838-7-B V20-P9P-38C CLP92 424838-4-B V20-P9P-38D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright NPT.8 09 3.5 Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Ring Size 200 800 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 NPT.8 09 3.5 Position 90 90 90 C 90 C 90 90 inlet (A) 90 C 90 C In-line with inlet (C) 90 90 90 C 90 C 90 Rot. C C C C C C C C C C C C C Max. PSI & Max. 2800 6.79 2800 6.62 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 8

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLP93 424838-8-B V20-P9P-38D CLS83 4576--B V20-S9S-A CLS84 Vickers Part No. See Note Above 4576-5-B V20-S9S-A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth - Tooth Tooth Ring Size 200 800 NPT.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 Position 90 Rot. C C Max. PSI & Max. Pneumatic Power & Control CLS85 4576-2-B V20-S9S-B CLS86 4576-6-B V20-S9S-B CLS87 4576-3-B V20-S9S-C CLS88 4576-7-B V20-S9S-C CLS89 4576-4-B V20-S9S-D CLS90 4576-8-B V20-S9S-D CLS9 380297--B V20-S9S-5A Tooth Tooth Tooth Tooth Tooth Tooth SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 90 C 90 C 90 90 C C C Fluid Conveying CLS92 380297-5-B V20-S9S-5A CLS93 380297-2-B V20-S9S-5B CLS94 380297-6-B V20-S9S-5B CLS95 380297-3-B V20-S9S-5C CLS96 380297-7-B V20-S9S-5C SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 90 C 90 C C C C Miscellaneous Products CLS97 380297-4-B V20-S9S-5D CLS98 380297-8-B V20-S9S-5D SAE.8 09 3.5 SAE.8 09 3.5 CLS99 372586--B V20-S9S-A 3/4 Stright SAE.8 09 3.5 CLT 372586-5-B V20-S9S-A- L 3/4 Stright SAE.8 09 3.5 CLT2 372586-2-B V20-S9S-B 3/4 Stright SAE.8 09 3.5 CLT3 372586-6-B V20-S9S-B- L 3/4 Stright SAE.8 09 3.5 90 90 90 C 90 C C C C Indexes & Technical Information CLT4 372586-3-B V20-S9S-C 3/4 Stright SAE.8 09 3.5 CLT5 372586-7-B V20-S9S-C- L 3/4 Stright SAE.8 09 3.5 CLT6 372586-4-B V20-S9S-D 3/4 Stright SAE.8 09 3.5 CLT7 372586-8-B V20-S9S-D- L CLT8 576980--B V20-S9S-38A CLT9 576980-5-B V20-S9S-38A CLT20 576980-2-B V20-S9S-38B CLT2 576980-6-B V20-S9S-38B 3/4 Stright SAE.8 09 3.5 Tooth - Tooth - Tooth - Tooth - SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 90 90 90 C 90 C C C C C 9

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLT22 576980-3-B V20-S9S-38C CLT23 576980-7-B V20-S9S-38C CLT24 576980-4-B V20-S9S-38D CLT25 576980-8-B V20-S9S-38D CLW23 02-345506--B V20-6S9S-5A CLW24 02-345506-5-B V20-6S9S-5A CLW25 02-345506-2-B V20-6S9S-5B CLW26 02-345506-6-B V20-6S9S-5B CLW27 02-345506-3-B V20-6S9S-5C CLW28 02-345506-7-B V20-6S9S-5C CLW29 02-345506-4-B V20-6S9S-5D CLW30 02-345506-8-B V20-6S9S-5D Tooth - Tooth - Tooth - Tooth - SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 SAE.8 09 3.5 CLW3 02-346200--B V20-6S9S-A 3/4 Stright SAE.8 09 3.5 CLW32 02-346200-5-B V20-6S9S-A- L 3/4 Stright SAE.8 09 3.5 CLW33 02-346200-2-B V20-6S9S-B 3/4 Stright SAE.8 09 3.5 CLW34 02-346200-6-B V20-6S9S-B- L 3/4 Stright SAE.8 09 3.5 CLW35 02-346200-3-B V20-6S9S-C 3/4 Stright SAE.8 09 3.5 CLW36 02-346200-7-B V20-6S9S-C- L 3/4 Stright SAE.8 09 3.5 CLW37 02-346200-4-B V20-6S9S-D 3/4 Stright SAE.8 09 3.5 CLW38 02-346200-8-B V20-6S9S-D- L CLL85 720AR0095A- B V20-P0P-5C 3/4 Stright SAE.8 09 3.5 NPT 2 0 5 CLL89 39763--B V20-P0P-A 3/4 Stright NPT 2 0 5 CLL90 39763-5-B V20-P0P-A 3/4 Stright NPT 2 0 5 CLL9 39763-2-B V20-P0P-B 3/4 Stright NPT 2 0 5 CLL92 39763-6-B V20-P0P-B 3/4 Stright NPT 2 0 5 CLL93 39763-3-B V20-P0P-C 3/4 Stright NPT 2 0 5 CLL94 39763-7-B V20-P0P-C 3/4 Stright NPT 2 0 5 CLL95 39763-4-B V20-P0P-D 3/4 Stright NPT 2 0 5 CLL96 Vickers Part No. See Note Above 39763-8-B V20-P0P-D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 800 3/4 Stright NPT 2 0 5 Position 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 Rot. C C C C C C C C C C C C C C Max. PSI & Max. 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 20

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLL97 CLL98 CLL99 Vickers Part No. See Note Above 02-2538--B V20-P0P-38A 02-2538-5-B V20-P0P-38A 02-2538-2-B V20-P0P-38B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth - Tooth - Tooth - Ring Size 200 800 NPT 2 0 5 NPT 2 0 5 NPT 2 0 5 Position 90 C Rot. C Max. PSI & Max. 2800 7.00 2800 7.00 2800 7.00 Pneumatic Power & Control CLM CLM2 CLM3 CLM4 CLM5 CLQ3 CLQ4 02-2538-6-B V20-P0P-38B 02-2538-3-B V20-P0P-38C 02-2538-7-B V20-P0P-38C 02-2538-4-B V20-P0P-38D 02-2538-8-B V20-P0P-38D 02-466627--B V20-S0S-5A 02-466627-5-B V20-S0S-5A Tooth - Tooth - Tooth - Tooth - Tooth - NPT 2 0 5 NPT 2 0 5 NPT 2 0 5 NPT 2 0 5 NPT 2 0 5 SAE 2 0 5 SAE 2 0 5 90 C 90 90 C C C C 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 Fluid Conveying CLQ5 CLQ6 CLQ7 CLQ8 CLQ9 02-466627-2-B V20-S0S-5B 02-466627-6-B V20-S0S-5B 02-466627-3-B V20-S0S-5C 02-466627-7-B V20-S0S-5C 02-466627-4-B V20-S0S-5D SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 90 C 90 C 90 C C 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 Miscellaneous Products CLQ20 02-466627-8-B V20-S0S-5D SAE 2 0 5 CLQ2 02-32248--B V20-S0S-A 3/4 Stright SAE 2 0 5 CLQ22 02-32248-5-B V20-S0S-A 3/4 Stright SAE 2 0 5 CLQ23 02-32248-2-B V20-S0S-B 3/4 Stright SAE 2 0 5 CLQ24 02-32248-6-B V20-S0S-B 3/4 Stright SAE 2 0 5 CLQ25 02-32248-3-B V20-S0S-C 3/4 Stright SAE 2 0 5 90 90 C 90 C C C C 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 Indexes & Technical Information CLQ26 02-32248-7-B V20-S0S-C 3/4 Stright SAE 2 0 5 CLQ27 02-32248-4-B V20-S0S-D 3/4 Stright SAE 2 0 5 CLQ28 CLQ29 CLQ30 CLQ3 CLQ32 CLQ33 02-32248-8-B V20-S0S-D 02-5688--B V20-S0S-38A 02-5688-5-B V20-S0S-38A 02-5688-2-B V20-S0S-38B 02-5688-6-B V20-S0S-38B 02-5688-3-B V20-S0S-38C 3/4 Stright SAE 2 0 5 Tooth - Tooth - Tooth - Tooth - Tooth - SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 90 90 90 C 90 C C C C C 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLQ34 CLQ35 CLQ36 CLT34 CLT35 CLT36 CLT37 CLT38 CLT39 CLT40 CLT4 CLM6 CLM7 CLM8 CLM9 CLM20 CLM2 CLM22 CLM23 CLM24 CLM25 CLM26 CLM27 CLM28 CLM29 CLM30 CLM3 02-5688-7-B V20-S0S-38C 02-5688-4-B V20-S0S-38D 02-5688-8-B V20-S0S-38D 478237--B 478237-5-B 478237-2-B 478237-6-B 478237-3-B 478237-7-B 478237-4-B 478237-8-B 390925--B 390925-5-B 390925-2-B 390925-6-B 390925-3-B 390925-7-B 390925-4-B 390925-8-B 372646--B 372646-5-B 372646-2-B 372646-6-B 372646-3-B 372646-7-B 372646-4-B 372646-8-B V20-6S0S-5A V20-6S0S-5A V20-6S0S-5B V20-6S0S-5B V20-6S0S-5C V20-6S0S-5C V20-6S0S-5D V20-6S0S-5D V20-PP-A V20-PP-A V20-PP-B V20-PP-B V20-PP-C V20-PP-C V20-PP-D V20-PP-D V20-PP-5A V20-PP-5A V20-PP-5B V20-PP-5B V20-PP-5C V20-PP-5C V20-PP-5D V20-PP-5D Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 SAE 2 0 5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 CLM32 37267--B V20-PP-A 3/4 Stright NPT 2.22 6.5 CLM33 Vickers Part No. See Note Above 37267-5-B V20-PP-A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 800 3/4 Stright NPT 2.22 6.5 Position 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2800 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 22

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLM34 37267-2-B V20-PP-B 3/4 Stright NPT 2.22 6.5 CLM35 Vickers Part No. See Note Above 37267-6-B V20-PP-B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 800 3/4 Stright NPT 2.22 6.5 CBM5 37267-3 V20-PP-C NPT 2.22 6.5 Position 90 C 90 C In-line with inlet (C) Rot. C Max. PSI & Max. 2500 7.00 2500 7.00 2500 7.36 Pneumatic Power & Control CLM36 37267-3-B V20-PP-C 3/4 Stright NPT 2.22 6.5 CLM37 37267-7-B V20-PP-C 3/4 Stright NPT 2.22 6.5 CLM38 37267-4-B V20-PP-D 3/4 Stright NPT 2.22 6.5 CLM39 CLM40 CLM4 CLM42 37267-8-B 406555--B 406555-5-B 406555-2-B V20-PP-D V20-PP-38A V20-PP-38A V20-PP-38B 3/4 Stright NPT 2.22 6.5 Tooth - Tooth - Tooth - NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 90 90 90 C C C C 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 Fluid Conveying CLM43 CLM44 CLM45 CLM46 CLM47 406555-6-B 406555-3-B 406555-7-B 406555-4-B 406555-8-B V20-PP-38B V20-PP-38C V20-PP-38C V20-PP-38D V20-PP-38D Tooth - Tooth - Tooth - Tooth - Tooth - NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 NPT 2.22 6.5 90 C 90 90 C C C 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 Miscellaneous Products CLQ37 CLQ38 CLQ39 CLQ40 CLQ4 CLQ42 372580--B 372580-5-B 372580-2-B 372580-6-B 372580-3-B 372580-7-B V20-SS-A V20-SS-A V20-SS-B V20-SS-B V20-SS-C V20-SS-C Tooth Tooth Tooth Tooth Tooth Tooth SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 90 C 90 C C C C 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 Indexes & Technical Information CLQ43 CLQ44 CLQ45 CLQ46 CLQ47 CLQ48 CLQ49 CLQ50 372580-4-B 372580-8-B 37259--B 37259-5-B 37259-2-B 37259-6-B 37259-3-B 37259-7-B V20-SS-D V20-SS-D V20-SS-5A V20-SS-5A V20-SS-5B V20-SS-5B V20-SS-5C V20-SS-5C Tooth Tooth SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 90 90 90 C 90 C C C C C 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 23

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLQ5 CLQ52 37259-4-B 37259-8-B V20-SS-5D V20-SS-5D SAE 2.22 6.5 SAE 2.22 6.5 CLQ53 358358--B V20-SS-A 3/4 Stright SAE 2.22 6.5 CLQ54 358358-5-B V20-SS-A 3/4 Stright SAE 2.22 6.5 CLQ55 358358-2-B V20-SS-B 3/4 Stright SAE 2.22 6.5 CLQ56 358358-6-B V20-SS-B 3/4 Stright SAE 2.22 6.5 CLQ57 358358-3-B V20-SS-C 3/4 Stright SAE 2.22 6.5 CLQ58 358358-7-B V20-SS-C 3/4 Stright SAE 2.22 6.5 CLQ59 358358-4-B V20-SS-D 3/4 Stright SAE 2.22 6.5 CLQ60 CLQ6 CLQ62 CLQ63 CLQ64 CLQ65 CLQ66 CLQ67 CLQ68 CLT58 CLT59 CLT60 CLT6 CLT62 CLT63 CLT64 CLT65 CLT66 CLT67 CLT68 Vickers Part No. See Note Above 358358-8-B 426653--B 426653-5-B 426653-2-B 426653-6-B 426653-3-B 426653-7-B 426653-4-B 426653-8-B V20-SS-D V20-SS-38A V20-SS-38A V20-SS-38B V20-SS-38B V20-SS-38C V20-SS-38C V20-SS-38D V20-SS-38D 02-02398--B V20-6SS-A 02-02398-5-B V20-6SS-A 02-02398-2-B V20-6SS-B 02-02398-6-B V20-6SS-B 02-02398-3-B V20-6SS-C 02-02398-7-B V20-6SS-C 02-02398-4-B V20-6SS-D 02-02398-8-B V20-6SS-D 5948--B 5948-5-B 5948-2-B V20-6SS-5A V20-6SS-5A V20-6SS-5B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright SAE 2.22 6.5 Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth Ring Size 200 800 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 Position 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max. 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 2500 7.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 24

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLT69 CLT70 CLT7 Vickers Part No. See Note Above 5948-6-B 5948-3-B 5948-7-B V20-6SS-5B V20-6SS-5C V20-6SS-5C Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 800 SAE 2.22 6.5 SAE 2.22 6.5 SAE 2.22 6.5 Position 90 C Rot. C C Max. PSI & Max. 2500 7.00 2500 7.00 2500 7.00 Pneumatic Power & Control CLT72 CLT73 CLM48 CLM49 CLM50 CLM5 CLM52 5948-4-B 5948-8-B 58495--B 58495-5-B 58495-2-B 58495-6-B 58495-3-B V20-6SS-5D V20-6SS-5D V20-P2P-A V20-P2P-A V20-P2P-B V20-P2P-B V20-P2P-C Tooth Tooth Tooth Tooth Tooth SAE 2.22 6.5 SAE 2.22 6.5 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 90 90 90 C 90 C C C C 2500 7.00 2500 7.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Fluid Conveying CLM53 CLM54 CLM55 CLM56 CLM57 58495-7-B 58495-4-B 58495-8-B 399748--B 399748-5-B V20-P2P-C V20-P2P-D V20-P2P-D V20-P2P-5A V20-P2P-5A Tooth Tooth Tooth NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 90 90 C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Miscellaneous Products CLM58 CLM59 CLM60 CLM6 CLM62 CLM63 399748-2-B 399748-6-B 399748-3-B 399748-7-B 399748-4-B 399748-8-B V20-P2P-5B V20-P2P-5B V20-P2P-5C V20-P2P-5C V20-P2P-5D V20-P2P-5D NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 90 C 90 C 90 90 C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Indexes & Technical Information CLM64 393723--B V20-P2P-A 3/4 Stright NPT 2.38 2 8 CLM65 393723-5-B V20-P2P-A 3/4 Stright NPT 2.38 2 8 CLM66 393723-2-B V20-P2P-B 3/4 Stright NPT 2.38 2 8 CLM67 393723-6-B V20-P2P-B 3/4 Stright NPT 2.38 2 8 CBN7 393723-3 V20-P2P-C NPT 2.38 2 8 CLM68 393723-3-B V20-P2P-C 3/4 Stright NPT 2.38 2 8 CLM69 393723-7-B V20-P2P-C 3/4 Stright NPT 2.38 2 8 CLM70 393723-4-B V20-P2P-D 3/4 Stright NPT 2.38 2 8 90 C 90 C In-line with inlet (C) 90 C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 7.99 2400 8.00 2400 8.00 2400 8.00 25

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLM7 CLM72 CLM73 CLM74 CLM75 CLM76 CLM77 CLM78 CLM79 CLQ69 CLQ70 CLQ7 CLQ72 CLQ73 CLQ74 CLQ75 CLQ76 CLQ77 CLQ78 CLQ79 CLQ80 CLQ8 CLQ82 CLQ83 CLQ84 393723-8-B 57867--B 57867-5-B 57867-2-B 57867-6-B 57867-3-B 57867-7-B 57867-4-B 57867-8-B 58870--B 58870-5-B 58870-2-B 58870-6-B 58870-3-B 58870-7-B 58870-4-B 58870-8-B 44762--B 44762-5-B 44762-2-B 44762-6-B 44762-3-B 44762-7-B 44762-4-B 44762-8-B V20-P2P-D V20-P2P-38A V20-P2P-38A V20-P2P-38B V20-P2P-38B V20-P2P-38C V20-P2P-38C V20-P2P-38D V20-P2P-38D V20-S2S-A V20-S2S-A V20-S2S-B V20-S2S-B V20-S2S-C V20-S2S-C V20-S2S-D V20-S2S-D V20-S2S-5A V20-S2S-5A V20-S2S-5B V20-S2S-5B V20-S2S-5C V20-S2S-5C V20-S2S-5D V20-S2S-5D 3/4 Stright NPT 2.38 2 8 Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 NPT 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 CLQ85 399722--B V20-S2S-A 3/4 Stright SAE 2.38 2 8 CLQ86 399722-5-B V20-S2S-A 3/4 Stright SAE 2.38 2 8 CLQ87 399722-2-B V20-S2S-B 3/4 Stright SAE 2.38 2 8 CLQ88 Vickers Part No. See Note Above 399722-6-B V20-S2S-B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 800 3/4 Stright SAE 2.38 2 8 Position 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 26

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLQ89 399722-3-B V20-S2S-C 3/4 Stright SAE 2.38 2 8 CLQ90 Vickers Part No. See Note Above 399722-7-B V20-S2S-C Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 3/4 Stright SAE 2.38 2 8 CLQ9 399722-4-B V20-S2S-D 3/4 Stright SAE 2.38 2 8 800 Position 90 Rot. C Max. PSI & Max. 2400 8.00 2400 8.00 2400 8.00 Pneumatic Power & Control CLQ92 CLQ93 CLQ94 CLQ95 CLQ96 CLQ97 CLQ98 399722-8-B V20-S2S-D 02-35408--B V20-S2S-38A 02-35408-5-B V20-S2S-38A 02-35408-2-B V20-S2S-38B 02-35408-6-B V20-S2S-38B 02-35408-3-B V20-S2S-38C 02-35408-7-B V20-S2S-38C 3/4 Stright SAE 2.38 2 8 Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 90 90 C 90 C C C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Fluid Conveying CLQ99 CLR CLT98 CLT99 CLU 02-35408-4-B V20-S2S-38D 02-35408-8-B V20-S2S-38D 02-42805--B V20-6S2S-5A 02-42805-5-B V20-6S2S-5A 02-42805-2-B V20-6S2S-5B Tooth - Tooth - SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 90 90 90 C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Miscellaneous Products CLU2 CLU3 CLU4 CLU5 CLU6 CLM80 02-42805-6-B V20-6S2S-5B 02-42805-3-B V20-6S2S-5C 02-42805-7-B V20-6S2S-5C 02-42805-4-B V20-6S2S-5D 02-42805-8-B V20-6S2S-5D 374344--B V20-P3P-A Tooth SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 SAE 2.38 2 8 NPT 2.59 3 9.5 90 C 90 90 C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Indexes & Technical Information CLM8 CLM82 CLM83 CLM84 CLM85 CLM86 CLM87 CLM88 374344-5-B 374344-2-B 374344-6-B 374344-3-B 374344-7-B 374344-4-B 374344-8-B 373669--B V20-P3P-A V20-P3P-B V20-P3P-B V20-P3P-C V20-P3P-C V20-P3P-D V20-P3P-D V20-P3P-5A Tooth Tooth Tooth Tooth Tooth Tooth Tooth NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 90 C 90 C 90 90 C C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 27

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLM89 CLM90 CLM9 CLM92 CLM93 CLM94 CLM95 373669-5-B 373669-2-B 373669-6-B 373669-3-B 373669-7-B 373669-4-B 373669-8-B V20-P3P-5A V20-P3P-5B V20-P3P-5B V20-P3P-5C V20-P3P-5C V20-P3P-5D V20-P3P-5D NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 CLM96 372606--B V20-P3P-A 3/4 Stright NPT 2.59 3 9.5 CLM97 372606-5-B V20-P3P-A 3/4 Stright NPT 2.59 3 9.5 CLM98 372606-2-B V20-P3P-B 3/4 Stright NPT 2.59 3 9.5 CLM99 372606-6-B V20-P3P-B 3/4 Stright NPT 2.59 3 9.5 CLN 372606-3-B V20-P3P-C 3/4 Stright NPT 2.59 3 9.5 CBM49 372606-3 V20-P3P-C NPT 2.59 3 9.5 CLN2 372606-7-B V20-P3P-C 3/4 Stright NPT 2.59 3 9.5 CLN3 372606-4-B V20-P3P-D 3/4 Stright NPT 2.59 3 9.5 CLN4 CLN5 CLN6 CLN7 CLN8 CLN9 CLN20 CLN2 CLN22 372606-8-B 424884--B 424884-5-B 424884-2-B 424884-6-B 424884-3-B 424884-7-B 424884-4-B 424884-8-B V20-P3P-D V20-P3P-38A V20-P3P-38A V20-P3P-38B V20-P3P-38B V20-P3P-38C V20-P3P-38C V20-P3P-38D V20-P3P-38D CKK80 720AR00236A V20-P3S-38C L-063 CLR2 CLR3 CLR4 CLR5 Vickers Part No. See Note Above 372579--B 372579-5-B 372579-2-B 372579-6-B V20-S3S-A V20-S3S-A V20-S3S-B V20-S3S-B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright NPT 2.59 3 9.5 Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth 3/4 OD Tooth Tooth Tooth Tooth Ring Size 200 800 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 NPT 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 Position 90 C 90 C 90 90 90 C 90 C In-line with inlet (C) 90 90 90 C 90 C 90 90 In-line with inlet (C) 90 C 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.05 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 7.70 2400 8.00 2400 8.00 2400 8.00 2400 8.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 28

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLR6 CLR7 CLR8 Vickers Part No. See Note Above 372579-3-B 372579-7-B 372579-4-B V20-S3S-C V20-S3S-C V20-S3S-D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth Tooth Tooth Ring Size 200 800 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 Position 90 Rot. C Max. PSI & Max. 2400 8.00 2400 8.00 2400 8.00 Pneumatic Power & Control CLR9 CLR20 CLR2 CLR22 CLR23 CLR24 CLR25 372579-8-B 372598--B 372598-5-B 372598-2-B 372598-6-B 372598-3-B 372598-7-B V20-S3S-D V20-S3S-5A V20-S3S-5A V20-S3S-5B V20-S3S-5B V20-S3S-5C V20-S3S-5C Tooth SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 90 90 C 90 C C C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Fluid Conveying CLR26 CLR27 372598-4-B 372598-8-B V20-S3S-5D V20-S3S-5D SAE 2.59 3 9.5 SAE 2.59 3 9.5 CLR28 37256--B V20-S3S-A 3/4 Stright SAE 2.59 3 9.5 CLR29 37256-5-B V20-S3S-A 3/4 Stright SAE 2.59 3 9.5 CLR30 37256-2-B V20-S3S-B 3/4 Stright SAE 2.59 3 9.5 90 90 90 C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Miscellaneous Products CLR3 37256-6-B V20-S3S-B 3/4 Stright SAE 2.59 3 9.5 CLR32 37256-3-B V20-S3S-C 3/4 Stright SAE 2.59 3 9.5 CLR33 37256-7-B V20-S3S-C 3/4 Stright SAE 2.59 3 9.5 CLR34 37256-4-B V20-S3S-D 3/4 Stright SAE 2.59 3 9.5 CLR35 CLR36 37256-8-B 428669--B V20-S3S-D V20-S3S-38A 3/4 Stright SAE 2.59 3 9.5 Tooth - SAE 2.59 3 9.5 90 C 90 90 C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 Indexes & Technical Information CLR37 CLR38 CLR39 CLR40 CLR4 CLR42 CLR43 CLU4 428669-5-B 428669-2-B 428669-6-B 428669-3-B 428669-7-B 428669-4-B 428669-8-B 57322--B V20-S3S-38A V20-S3S-38B V20-S3S-38B V20-S3S-38C V20-S3S-38C V20-S3S-38D V20-S3S-38D V20-6S3S-5A Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 90 C 90 C 90 90 C C C C 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 29

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 CLU42 CLU43 CLU44 CLU45 CLU46 CLU47 Vickers Part No. See Note Above 57322-5-B 57322-2-B 57322-6-B 57322-3-B 57322-7-B 57322-4-B V20-6S3S-5A V20-6S3S-5B V20-6S3S-5B V20-6S3S-5C V20-6S3S-5C V20-6S3S-5D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Pumps & Accessories Ring Size 200 800 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 SAE 2.59 3 9.5 Position 90 C 90 C 90 V20-6S3S-5D 90 CLU48 57322-8-B SAE 2.59 3 9.5 : @ 800 and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Rot. C C C C Max. PSI & Max. 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 2400 8.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 30

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 Parts for Vickers V20 Vane Pumps Miscellaneous Products Fluid Conveying Pneumatic Power & Control Indexes & Technical Information Parts for Vickers V20 Vane Pumps Vickers Model Description CAD78 098574 Bearing 0.50 CLB29 280689 Body, SAE-A flange, -/4" NPT port CLB3 294266 Body, SAE-A flange,.625-2 Straight Thread port CLB33 29576 Body, SAE-B flange,.625-2 Straight Thread port CLB32 295378 Bolt for Pumps with Ring Size 05, 06 CJC5 0038 Bolt for Pumps with Ring Size 07, 08, 08, 0, 0.9 CAA64 0039 Bolt for Pumps with Ring Size 2, 3 0.20 CJC28 02-37559 Cartridge Kit, Ring Size 05 2.66 CAC75 02-37560 Cartridge Kit, Ring Size 06 8.00 CEG52 02-3756 Cartridge Kit, Ring Size 07 3.56 CEG53 02-37562 Cartridge Kit, Ring Size 08 3.58 CAC76 02-37563 Cartridge Kit, Ring Size 09.00 CEG54 02-37564 Cartridge Kit, Ring Size 0 4.56 CAC77 02-37565 Cartridge Kit, Ring Size 5.00 CAC78 02-37566 Cartridge Kit, Ring Size 2 4.93 CAC79 02-37567 Cartridge Kit, Ring Size 3 2.00 CAB36 00588 Shaft Key 0.02 CLB37 33657 Port, 3/4" NPT 3

Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 9.5 @ 800 Parts for Vickers V20 Vane Pumps Vickers Model Description CLB30 293373 Port,.062-2 Straight Thread CAA88 0026 Pin for Ring Size 05, 06 0.0 CAB6 002478 Pin for Ring Size 07, 08, 09 0.0 CAB97 06662 Pin for Ring Size 0, 0.0 CAB64 009603 Pin for Ring Size 2, 3 0.0 CJZ8 359287 Pressure Plate.8 CLA93 09975 Retaining Ring 0.0 CEX24 098653 Retaining Ring 0.0 CBD92 229235 Shaft Seal 0.75 CBJ77 280372 Shaft, #, 3/4" 0.76 CBJ78 28055 Shaft, #, Tooth Spline 0.75 CBJ92 294922 Shaft, #5, 3 Tooth Spline 0.65 CBM4 328096 Shaft, #38, Tooth Spline 0.56 CLA88 028422 Spring ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 32

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20F Series Vane Pumps To 9.5 @ 800 Vickers V20F Vane Pumps Control Cover The Control Cover limits flow to the operating system to the desired maximum. Excess flow is diverted to tank. A relief valve is included that limits maximum system pressure. Unless noted otherwise, all pumps have: SAE A Mounting Flange. -/4" NPT, 3/4-6 St.Thd., /2" NPT Tank. Application Information: page 53 Specifications: page 532 Model Codes: page 533 Dimensions: page 535 Replacement Parts: page 33 Foot Brackets: page 84 Pumps are stocked as shown in table. ANY inlet position and rotation is available for same-day shipment. See Model Codes page to select a different model code. Vickers Part No. See Note Above CF73 02-4809-5 V20F-PP-38A8-22L CAC90 02-42388-7 V20F-P3P-38C622 CEL4 02-42388-4 V20F-P3P-38D622 CER98 02-4854-4 V20F-P3P-38D822 CZZ86 02-4854-7 V20F-P3P-38C822L Vickers V20F Vane Pumps Control Cover Vickers Model See Note Above Shaft Displ Tooth.590 Dia er Length Tooth.590 Dia er Length Tooth.590 Dia er Length Tooth.590 Dia er Length Tooth.590 Dia er Length Ring Size 200 2.22 2.59 3 2.59 3 2.59 3 2.59 3 Rate & Relief Setting 8.0 Position inlet (A) 6.0 In-line with inlet (C) 6.0 8.0 90 Deg. from inlet (D) 90 Deg. from inlet (D) 8.0 In-line with inlet (C) Rate: Orifice Rate (). Non-adjustable pressure compensated fixed orifice in rear cover. Relief Setting: Non-adjustable replaceable cartridge. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Vickers Part No. Vickers Model 02-4809-5 V20F-PP-38A8-22L 02-37565 02-42388-7 V20F-P3P-38C622 3 02-37567 02-42388-4 V20F-P3P-38D622 3 02-37567 Rot. C C Max. PSI & Max. 2500 2.47 2400 2.98 2400 22.3 2400 22.5 2400 22.55 Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit 328096 Tooth- er -- 229235 922733 328096 Tooth- er -- 229235 922733 328096 Tooth- er -- 229235 922733 33

Single ydraulic Pumps Fixed Displacement Vickers V20F Series Vane Pumps To 9.5 @ 800 Vickers Part No. Vickers Model 02-4854-4 V20F-P3P-38D822 3 02-37567 02-4854-7 V20F-P3P-38C822L 3 02-37567 Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit 328096 Tooth- er 328096 Tooth- er -- 229235 922733 -- 229235 922733 Vickers V20F Vane Pumps Replacement Parts List Part Number Description CJC28 02-37559 Cartridge Kit, Ring Size 05 2.66 CAC75 02-37560 Cartridge Kit, Ring Size 06 8.00 CEG52 02-3756 Cartridge Kit, Ring Size 07 3.56 CEG53 02-37562 Cartridge Kit, Ring Size 08 3.58 CAC76 02-37563 Cartridge Kit, Ring Size 09.00 CEG54 02-37564 Cartridge Kit, Ring Size 0 4.56 CAC77 02-37565 Cartridge Kit, Ring Size 5.00 CAC78 02-37566 Cartridge Kit, Ring Size 2 4.93 CAC79 02-37567 Cartridge Kit, Ring Size 3 2.00 CAB64 009603 Pin for Pumps with Ring Size 2 3 0.0 CJZ8 359287 Pressure Plate Sub Assy, Includes 280267 Bushing.8 CCB9 922733 Seal Kit, Buna-N 0.08 CAB36 00588 Shaft Key, 3/6 x -5/8 0.02 CBJ77 280372 # Shaft, 3/4" Straight 0.76 CBD92 229235 Shaft Seal, Buna-N 0.75 CBJ92 294922 #5 Shaft, 3 Tooth 0.65 CBM4 328096 #38 Shaft, Tooth, er Length 0.56 CBJ78 28055 # Shaft, Tooth 0.75 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 34

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 25V Series Vane Pumps To 3.5 @ 800 Vickers 25V Vane Pumps For Industrial Applications Low Noise / 800 Capability Unless noted otherwise, all pumps have: SAE B Mounting Flange. SAE 4-Bolt Flange Ports: -/2", ". Application Information: page 53 Specifications: page 537 Model Codes: page 538 Dimensions: page 539 Replacement Parts: page 35 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are stocked as shown in table. ANY inlet position and rotation is available for same-day shipment. See Model Codes page to select a different model code. Vickers 25V Vane Pumps For Industrial Applications Low Noise / 800 Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 800 CEG35 02-377-3 25V2A-C22R 7/8 Straight 4.3 2 3.5 Position inlet (C) : @ 800 and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Vickers Part No. Vickers Model 02-377-3 25V2A-C22R 2 02-02535 Rot. Max. PSI & Max. 800 32.2 Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit 238755 7/8"-Straight- 009955 394976 922850 Vickers 25V Vane Pumps Replacement Parts List Part Number Description CAC23 02-02535 Cartridge Kit, Ring Size 2, Rotation 8.06 CCB92 922850 Seal Kit, Buna-N 0.08 CDU27 009955 Shaft Key, 3/6 x -/4 0.0 CBN2 394976 Shaft Seal, Buna-N 0.03 CBF3 238929 # Shaft, 3Tooth SAE B.8 CEF55 238755 # Shaft, 7/8" Straight.3 CEG72 9400 Spirolox Ring 0.0 CDU27 009955 Key for # Shaft 0.0 CAM34 90362 Retainer 0.02 35

Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 3.5 @ 800 Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Unless noted otherwise, all pumps have: SAE B Mounting Flange. SAE 4-Bolt Flange Ports: -/2", ". Application Information: page 53 Specifications: page 54 Model Codes: page 542 Dimensions: page 543 Replacement Parts: page 40 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in 24-48 hours. See Model Codes page to select a different model code. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Vickers Model See Note Above Note Above Shaft Displ Ring Size 200 CMF4 429946--B 25VQ2A-A20 2.45 2 8 CMF45 429946-5-B 25VQ2A-A20 2.45 2 8 CMF42 429946-2-B 25VQ2A-B20 2.45 2 8 CMF46 429946-6-B 25VQ2A-B20 2.45 2 8 CMF43 429946-3-B 25VQ2A-C20 2.45 2 8 CMF47 429946-7-B 25VQ2A-C20 2.45 2 8 CMF44 429946-4-B 25VQ2A-D20 2.45 2 8 CMF48 429946-8-B 25VQ2A-D20 2.45 2 8 CME98 47994--B 25VQ2A-A20 7/8 Straight 2.45 2 8 CMF3 47994-5-B 25VQ2A-A20 7/8 Straight 2.45 2 8 CME99 47994-2-B 25VQ2A-B20 7/8 Straight 2.45 2 8 CMF4 47994-6-B 25VQ2A-B20 7/8 Straight 2.45 2 8 CMF 47994-3-B 25VQ2A-C20 7/8 Straight 2.45 2 8 CMF5 47994-7-B 25VQ2A-C20 7/8 Straight 2.45 2 8 CMF2 47994-4-B 25VQ2A-D20 7/8 Straight 2.45 2 8 800 Position 90 90 90 C 90 C 90 90 90 C Rot. C C C C C C C Max. PSI & Max. 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 36

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 3.5 @ 800 Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CMF6 47994-8-B 25VQ2A-D20 7/8 Straight 2.45 2 8 800 CMF7 42472--B 25VQ4A-A20 2.77 4 2.5 CMF2 42472-5-B 25VQ4A-A20 2.77 4 2.5 CMF8 42472-2-B 25VQ4A-B20 2.77 4 2.5 CMF22 42472-6-B 25VQ4A-B20 2.77 4 2.5 CMF9 42472-3-B 25VQ4A-C20 2.77 4 2.5 CMF23 42472-7-B 25VQ4A-C20 2.77 4 2.5 CMF20 42472-4-B 25VQ4A-D20 2.77 4 2.5 CMF24 42472-8-B 25VQ4A-D20 2.77 4 2.5 CME90 47993--B 25VQ4A-A20 7/8 Straight 2.77 4 2.5 CME94 47993-5-B 25VQ4A-A20 7/8 Straight 2.77 4 2.5 CME9 47993-2-B 25VQ4A-B20 7/8 Straight 2.77 4 2.5 CME95 47993-6-B 25VQ4A-B20 7/8 Straight 2.77 4 2.5 CE2 47993-3 25VQ4A-C20 7/8 Straight 2.77 4 2.5 CME92 47993-3-B 25VQ4A-C20 7/8 Straight 2.77 4 2.5 CME96 47993-7-B 25VQ4A-C20 7/8 Straight 2.77 4 2.5 CME93 47993-4-B 25VQ4A-D20 7/8 Straight 2.77 4 2.5 CME97 47993-8-B 25VQ4A-D20 7/8 Straight 2.77 4 2.5 CMF25 42475--B 25VQ7A-A20 3.37 7 25.5 CMF29 42475-5-B 25VQ7A-A20 3.37 7 25.5 CMF26 42475-2-B 25VQ7A-B20 3.37 7 25.5 CMF30 42475-6-B 25VQ7A-B20 3.37 7 25.5 CE28 42475-3 25VQ7A-C20 3.37 7 25.5 CMF27 42475-3-B 25VQ7A-C20 3.37 7 25.5 CMF3 42475-7-B 25VQ7A-C20 3.37 7 25.5 CMF28 42475-4-B 25VQ7A-D20 3.37 7 25.5 CMF32 42475-8-B 25VQ7A-D20 3.37 7 25.5 CME82 47992--B 25VQ7A-A20 7/8 Straight 3.37 7 25.5 CME86 47992-5-B 25VQ7A-A20 7/8 Straight 3.37 7 25.5 Position 90 C 90 90 90 C 90 C 90 90 In-line with inlet (C) 90 C 90 C 90 90 In-line with inlet (C) 90 C 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max. 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2700 3.57 2700 32.00 2700 32.00 2700 32.00 2700 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 3.0 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 37

Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 3.5 @ 800 Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 800 CME83 47992-2-B 25VQ7A-B20 7/8 Straight 3.37 7 25.5 CME87 47992-6-B 25VQ7A-B20 7/8 Straight 3.37 7 25.5 CBP69 47992-3 25VQ7A-C20 7/8 Straight 3.37 7 25.5 CME84 47992-3-B 25VQ7A-C20 7/8 Straight 3.37 7 25.5 CME88 47992-7-B 25VQ7A-C20 7/8 Straight 3.37 7 25.5 CME85 47992-4-B 25VQ7A-D20-7/8 Straight 3.37 7 25.5 CME89 47992-8-B 25VQ7A-D20 7/8 Straight 3.37 7 25.5 CMF57 629379--B 25VQ9A-A20 3.74 9 28.5 CMF6 629379-5-B 25VQ9A-A20 3.74 9 28.5 CMF58 629379-2-B 25VQ9A-B20 3.74 9 28.5 CMF62 629379-6-B 25VQ9A-B20 3.74 9 28.5 CMF59 629379-3-B 25VQ9A-C20 3.74 9 28.5 CMF63 629379-7-B 25VQ9A-C20 3.74 9 28.5 CMF60 629379-4-B 25VQ9A-D20 3.74 9 28.5 CMF64 629379-8-B 25VQ9A-D20 3.74 9 28.5 CMF49 578308--B 25VQ9A-A20 7/8 Straight 3.74 9 28.5 CMF53 578308-5-B 25VQ9A-A20 7/8 Straight 3.74 9 28.5 CMF50 578308-2-B 25VQ9A-B20 7/8 Straight 3.74 9 28.5 CMF54 578308-6-B 25VQ9A-B20 7/8 Straight 3.74 9 28.5 CMF5 578308-3-B 25VQ9A-C20 7/8 Straight 3.74 9 28.5 CMF55 578308-7-B 25VQ9A-C20 7/8 Straight 3.74 9 28.5 CMF52 578308-4-B 25VQ9A-D20 7/8 Straight 3.74 9 28.5 CMF56 578308-8-B 25VQ9A-D20 7/8 Straight 3.74 9 28.5 CMF33 42477--B 25VQ2A-A20 4.2 2 3.5 CMF37 42477-5-B 25VQ2A-A20 4.2 2 3.5 CMF34 42477-2-B 25VQ2A-B20 4.2 2 3.5 CMF38 42477-6-B 25VQ2A-B20 4.2 2 3.5 CBP80 42477-3 25VQ2A-C20 4.2 2 3.5 CMF35 42477-3-B 25VQ2A-C20 4.2 2 3.5 Position 90 90 In-line with inlet (C) 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 In-line with inlet (C) Rot. C C C C C C C C C C C C C Max. PSI & Max. 2500 32.00 2500 32.00 2500 30.53 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 3.32 2500 32.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 38

ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Pumps & Accessories Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 3.5 @ 800 Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 800 CMF39 42477-7-B 25VQ2A-C20 4.2 2 3.5 CMF36 42477-4-B 25VQ2A-D20 4.2 2 3.5 CMF40 42477-8-B 25VQ2A-D20 4.2 2 3.5 CME78 46457-5-B 25VQ2A-A20 7/8 Straight 4.2 2 3.5 CME74 46457--B 25VQ2A-A20 7/8 Straight 4.2 2 3.5 CME75 46457-2-B 25VQ2A-B20 7/8 Straight 4.2 2 3.5 CME79 46457-6-B 25VQ2A-B20 7/8 Straight 4.2 2 3.5 CME76 46457-3-B 25VQ2A-C20 7/8 Straight 4.2 2 3.5 CBP59 46457-3 25VQ2A-C20 7/8 Straight 4.2 2 3.5 CME80 46457-7-B 25VQ2A-C20 7/8 Straight 4.2 2 3.5 CME77 46457-4-B 25VQ2A-D20 7/8 Straight 4.2 2 3.5 Position 90 C 90 C 90 90 In-line with inlet (C) 90 C CME8 46457-8-B 25VQ2A-D20 7/8 Straight 4.2 2 3.5 90 C : @ 800 and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Rot. C C C C C C Max. PSI & Max. 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 32.00 2500 40.00 2500 32.00 2500 32.00 2500 32.00 Indexes & Technical Information Miscellaneous Products 39

Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 3.5 @ 800 Parts for Vickers 25VQ Vane Pumps Parts for Vickers 25VQ Vane Pumps Vickers Model Description CAA76 00705 Bearing 0.3 CLB60 942353 Body CE9 46439 Cartridge Kit, 2 8.09 CBP57 46440 Cartridge Kit, 4 8.02 CBP58 4644 Cartridge Kit, 7 8.0 CLB50 42232 Cartridge Kit, 9 CE20 46442 Cartridge Kit, 2 7.94 CLB7 224309 Cover CDU27 009955 Shaft Key 0.0 CAJ46 2028 Snap Ring 0.0 CEG72 9400 Snap Ring 0.0 CEZ94 09668 Screw 0.25 CBN2 394976 Shaft Seal 0.03 CEF55 238755 Shaft, 3/4" Straight Shaft.3 CBF3 238929 Shaft, SAE B - 7/8" - 3 Tooth Spline.8 CAM34 90362 Washer 0.02 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 40

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 30VQ Series Vane Pumps To 42 @ 800 Vickers 30VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Unless noted otherwise, all pumps have: SAE C Mounting Flange. SAE 4-Bolt Flange Ports: 2", -/4". Application Information: page 53 Specifications: page 54 Model Codes: page 542 Dimensions: page 544 Replacement Parts: page 43 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in 24-48 hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers 30VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Vickers Model See Note Below Note Above Shaft Displ Ring Size 200 800 Position CMF89 430202--B 30VQ24A-A20 4.72 24 36.78 CMF93 430202-5-B 30VQ24A-A20 4.72 24 36.78 CMF90 430202-2-B 30VQ24A-B20 4.72 24 36.78 90 CMF94 430202-6-B 30VQ24A-B20 4.72 24 36.78 90 CMF9 430202-3-B 30VQ24A-C20 4.72 24 36.78 CMF95 430202-7-B 30VQ24A-C20 4.72 24 36.78 CMF92 430202-4-B 30VQ24A-D20 4.72 24 36.78 90 C CMF96 430202-8-B 30VQ24A-D20 4.72 24 36.78 90 C CMF65 4866--B 30VQ24A-A20 7/8 Straight 4.72 24 36.78 CMF69 4866-5-B 30VQ24A-A20 7/8 Straight 4.72 24 36.78 CMF66 4866-2-B 30VQ24A-B20 7/8 Straight 4.72 24 36.78 90 CMF70 4866-6-B 30VQ24A-B20 7/8 Straight 4.72 24 36.78 90 CMF67 4866-3-B 30VQ24A-C20 7/8 Straight 4.72 24 36.78 CMF7 4866-7-B 30VQ24A-C20 7/8 Straight 4.72 24 36.78 CMF68 4866-4-B 30VQ24A-D20 7/8 Straight 4.72 24 36.78 90 C Rot. C C C C C C C Max. PSI & Max. 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 4

Single ydraulic Pumps Fixed Displacement Vickers 30VQ Series Vane Pumps To 42 @ 800 Vickers 30VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Below Vickers Model See Note Above Shaft Displ CMF72 4866-8-B 30VQ24A-D20 7/8 Straight 4.72 24 36.78 90 C CMF8 42492--B 30VQ28A-A20 5.5 28 42.85 CMF85 42492-5-B 30VQ28A-A20 5.5 28 42.85 CMF82 42492-2-B 30VQ28A-B20 5.5 28 42.85 CMF86 42492-6-B 30VQ28A-B20 5.5 28 42.85 CMF83 42492-3-B 30VQ28A-C20 5.5 28 42.85 CMF87 42492-7-B 30VQ28A-C20 5.5 28 42.85 CMF84 42492-4-B 30VQ28A-D20 5.5 28 42.85 CMF88 42492-8-B 30VQ28A-D20 5.5 28 42.85 90 90 90 C 90 C CMF73 42490--B 30VQ28A-A20 7/8 Straight 5.5 28 42.85 CMF77 42490-5-B 30VQ28A-A20 7/8 Straight 5.5 28 42.85 CMF74 42490-2-B 30VQ28A-B20 7/8 Straight 5.5 28 42.85 CMF78 42490-6-B 30VQ28A-B20 7/8 Straight 5.5 28 42.85 CMF75 42490-3-B 30VQ28A-C20 7/8 Straight 5.5 28 42.85 CMF79 42490-7-B 30VQ28A-C20 7/8 Straight 5.5 28 42.85 CMF76 42490-4-B 30VQ28A-D20 7/8 Straight 5.5 28 42.85 90 90 90 C C C C C C C C C 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 2000 34.00 CMF80 42490-8-B 30VQ28A-D20 7/8 Straight 5.5 28 42.85 90 C C 2000 34.00 Note: : @ 800 and 00 PSI. Displ. cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Ring Size 200 800 Position Rot. Max. PSI & Max. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 42

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 30VQ Series Vane Pumps To 42 @ 800 Parts for Vickers 30VQ Vane Pumps Fluid Conveying Pneumatic Power & Control Miscellaneous Products Indexes & Technical Information Parts for Vickers 30VQ Vane Pumps Vickers Model Description CAA76 00705 Bearing 0.3 CLB6 942354 Body CLB48 47052 Cartridge Kit, 24 CLB47 46452 Cartridge Kit, 28 CLB8 224526 Cover CDU27 009955 Key 0.0 CAJ46 2028 Snap Ring 0.0 CEG72 9400 Snap Ring 0.0 CLA97 9805 Screw CBN2 394976 Shaft Seal 0.03 CEF55 238755 Shaft, 7/8" Straight.3 CBF3 238929 Shaft, SAE B - 7/8" - 3 Toothe Spline.8 CAM34 90362 Washer 0.02 43

Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 57 @ 800 Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Unless noted otherwise, all pumps have: SAE C Mounting Flange. SAE 4-Bolt Flange Ports: 2", -/4". Application Information: page 53 Specifications: page 54 Model Codes: page 542 Dimensions: page 544 Replacement Parts: page 48 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in 24-48 hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Vickers Model See Note Above Note Above Shaft Displ Ring Size 200 800 CMD94 420995--B 35VQ2A-A20 4 Tooth SAE C 4.04 2 3.5 CMD98 420995-5-B 35VQ2A-A20 4 Tooth SAE C 4.04 2 3.5 CMD95 420995-2-B 35VQ2A-B20 4 Tooth SAE C 4.04 2 3.5 CMD99 420995-6-B 35VQ2A-B20 4 Tooth SAE C 4.04 2 3.5 CMD96 420995-3-B 35VQ2A-C20 4 Tooth SAE C 4.04 2 3.5 CME 420995-7-B 35VQ2A-C20 4 Tooth SAE C 4.04 2 3.5 CMD97 420995-4-B 35VQ2A-D20 4 Tooth SAE C 4.04 2 3.5 CME2 420995-8-B 35VQ2A-D20 4 Tooth SAE C 4.04 2 3.5 CME66 5939--B 35VQ2A-A20 -/4 Stright 4.04 2 3.5 CME70 5939-5-B 35VQ2A-A20 -/4 Stright 4.04 2 3.5 CME67 5939-2-B 35VQ2A-B20 -/4 Stright 4.04 2 3.5 CME7 5939-6-B 35VQ2A-B20 -/4 Stright 4.04 2 3.5 CME68 5939-3-B 35VQ2A-C20 -/4 Stright 4.04 2 3.5 CME72 5939-7-B 35VQ2A-C20 -/4 Stright 4.04 2 3.5 CME69 5939-4-B 35VQ2A-D20 -/4 Stright 4.04 2 3.5 Position 90 90 90 C 90 C 90 90 90 C Rot. C C C C C C C Max. PSI & Max. 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 44

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 57 @ 800 Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CME73 5939-8-B 35VQ2A-D20 -/4 Stright 4.04 2 3.5 CME58 427807--B 35VQ25A-A20 4 Tooth SAE C 4.98 25 38.5 CME62 427807-5-B 35VQ25A-A20 4 Tooth SAE C 4.98 25 38.5 CME59 427807-2-B 35VQ25A-B20 4 Tooth SAE C 4.98 25 38.5 CME63 427807-6-B 35VQ25A-B20 4 Tooth SAE C 4.98 25 38.5 CME60 427807-3-B 35VQ25A-C20 4 Tooth SAE C 4.98 25 38.5 CME64 427807-7-B 35VQ25A-C20 4 Tooth SAE C 4.98 25 38.5 CME6 427807-4-B 35VQ25A-D20 4 Tooth SAE C 4.98 25 38.5 CME65 427807-8-B 35VQ25A-D20 4 Tooth SAE C 4.98 25 38.5 CME25 42527-5-B 35VQ25A-A20 -/4 Stright 4.98 25 38.5 CME2 42527--B 35VQ25A-A20 -/4 Stright 4.98 25 38.5 CME22 42527-2-B 35VQ25A-B20 -/4 Stright 4.98 25 38.5 CME26 42527-6-B 35VQ25A-B20 -/4 Stright 4.98 25 38.5 CME23 42527-3-B 35VQ25A-C20 -/4 Stright 4.98 25 38.5 CME27 42527-7-B 35VQ25A-C20 -/4 Stright 4.98 25 38.5 CME24 42527-4-B 35VQ25A-D20 -/4 Stright 4.98 25 38.5 CME28 42527-8-B 35VQ25A-D20 -/4 Stright 4.98 25 38.5 CME3 42526--B 35VQ30A-A20 4 Tooth SAE C 5.96 30 46 CME7 42526-5-B 35VQ30A-A20 4 Tooth SAE C 5.96 30 46 CME4 42526-2-B 35VQ30A-B20 4 Tooth SAE C 5.96 30 46 CME8 42526-6-B 35VQ30A-B20 4 Tooth SAE C 5.96 30 46 CME5 42526-3-B 35VQ30A-C20 4 Tooth SAE C 5.96 30 46 CME9 42526-7-B 35VQ30A-C20 4 Tooth SAE C 5.96 30 46 CME6 42526-4-B 35VQ30A-D20 4 Tooth SAE C 5.96 30 46 CME20 42526-8-B 35VQ30A-D20 4 Tooth SAE C 5.96 30 46 CME43 42555--B 35VQ30A-A20 -/4 Stright 5.96 30 46 CME47 42555-5-B 35VQ30A-A20 -/4 Stright 5.96 30 46 CME44 42555-2-B 35VQ30A-B20 -/4 Stright 5.96 30 46 CME48 42555-6-B 35VQ30A-B20 -/4 Stright 5.96 30 46 800 Position 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2500 50.00 45

Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 57 @ 800 Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CME45 42555-3-B 35VQ30A-C20 -/4 Stright 5.96 30 46 CME49 42555-7-B 35VQ30A-C20 -/4 Stright 5.96 30 46 CME46 42555-4-B 35VQ30A-D20 -/4 Stright 5.96 30 46 CME50 42555-8-B 35VQ30A-D20 -/4 Stright 5.96 30 46 CMD86 49330--B 35VQ35A-A20 4 Tooth SAE C 6.88 35 53.6 CMD90 49330-5-B 35VQ35A-A20 4 Tooth SAE C 6.88 35 53.6 CMD87 49330-2-B 35VQ35A-B20 4 Tooth SAE C 6.88 35 53.6 CMD9 49330-6-B 35VQ35A-B20 4 Tooth SAE C 6.88 35 53.6 CMD88 49330-3-B 35VQ35A-C20 4 Tooth SAE C 6.88 35 53.6 CMD92 49330-7-B 35VQ35A-C20 4 Tooth SAE C 6.88 35 53.6 CMD89 49330-4-B 35VQ35A-D20 4 Tooth SAE C 6.88 35 53.6 CMD93 49330-8-B 35VQ35A-D20 4 Tooth SAE C 6.88 35 53.6 CME33 42528-5-B 35VQ35A-A20 -/4 Stright 6.88 35 53.6 CME29 42528--B 35VQ35A-A20 -/4 Stright 6.88 35 53.6 CME30 42528-2-B 35VQ35A-B20 -/4 Stright 6.88 35 53.6 CME30 42528-2-B 35VQ35A-B20 -/4 Stright 6.88 35 53.6 CME34 42528-7-B 35VQ35A-C20 -/4 Stright 6.88 35 53.6 CME3 42528-3-B 35VQ35A-C20 -/4 Stright 6.88 35 53.6 CME32 42528-4-B 35VQ35A-D20 -/4 Stright 6.88 35 53.6 CME32 42528-4-B 35VQ35A-D20 -/4 Stright 6.88 35 53.6 CME5 427765--B 35VQ38A-A20 4 Tooth SAE C 7.42 38 57 CME55 427765-5-B 35VQ38A-A20 4 Tooth SAE C 7.42 38 57 CME52 427765-2-B 35VQ38A-B20 4 Tooth SAE C 7.42 38 57 CME56 427765-7-B 35VQ38A-B20 4 Tooth SAE C 7.42 38 57 CME53 427765-3-B 35VQ38A-C20 4 Tooth SAE C 7.42 38 57 CME56 427765-7-B 35VQ38A-C20 4 Tooth SAE C 7.42 38 57 CME54 427765-4-B 35VQ38A-D20 4 Tooth SAE C 7.42 38 57 CME57 427765-8-B 35VQ38A-D20 4 Tooth SAE C 7.42 38 57 CME35 42529--B 35VQ38A-A20 -/4 Stright 7.42 38 57 800 Position 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C 90 90 90 C 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max. 2500 50.00 2500 50.00 2500 50.00 2500 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 2400 50.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 46

ydraulic Power & Control Pneumatic Power & Control Pumps & Accessories Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 57 @ 800 Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CME39 42529-5-B 35VQ38A-A20 -/4 Stright 7.42 38 57 CME36 42529-2-B 35VQ38A-B20 -/4 Stright 7.42 38 57 CME40 42529-6-B 35VQ38A-B20 -/4 Stright 7.42 38 57 CE32 42529-3 35VQ38A-C20 -/4 Straight 7.42 38 57 CME37 42529-3-B 35VQ38A-C20 -/4 Stright 7.42 38 57 CME4 42529-7-B 35VQ38A-C20 -/4 Stright 7.42 38 57 CME38 42529-4-B 35VQ38A-D20 -/4 Stright 7.42 38 57 800 Position 90 90 inlet (C) 90 C 90 C CME42 42529-8-B 35VQ38A-D20 -/4 Stright 7.42 38 57 : @ 800 and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Rot. C C C C Max. PSI & Max. 2400 50.00 2400 50.00 2400 50.00 2400 49.20 2400 50.00 2400 50.00 2400 50.00 2400 50.00 Indexes & Technical Information Miscellaneous Products Fluid Conveying 47

Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 57 @ 800 Parts for Vickers 35VQ Vane Pumps Parts for Vickers 35VQ Vane Pumps Vickers Model Description CAD65 03844 Bearing 0.50 CLB46 4306 Body CLA84 073 Bolt CKA7 43420 Cartridge Kit, 2 4.00 CBP46 4342 Cartridge Kit, 25 4.00 CDX24 43422 Cartridge Kit, 30 3.85 CBP45 4348 Cartridge Kit, 35 3.77 CDX23 4349 Cartridge Kit, 38 3.75 CLB22 234248 Cover CEG58 088678 Key 0.04 CJX9 9982 Snap Ring 0.0 CEG73 9344 Snap Ring 0.02 CBN9 394973 Shaft Seal 0.07 CEG78 233624 Shaft, -/4" Straight 2.39 CEG79 242287 -/4" 4 Tooth 2/24DP Spline 2.3 CJX5 93220 Washer 0.0 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 48

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 90 @ 800 Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Unless noted otherwise, all pumps have: SAE C Mounting Flange. SAE 4-Bolt Flange Ports: 3", -/2". Application Information: page 53 Specifications: page 54 Model Codes: page 542 Dimensions: page 545 Replacement Parts: page 53 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in 24-48 hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 800 Position Rot. CMD2 42066--B 45VQ42AA20 4 Tooth SAE D 8.46 42 65.92 CMD6 42066-5-B 45VQ42AA20 4 Tooth SAE D 8.46 42 65.92 C CMD3 42066-2-B 45VQ42AB20 4 Tooth SAE D 8.46 42 65.92 90 CMD7 42066-6-B 45VQ42AB20 4 Tooth SAE D 90 8.46 42 65.92 C CMD4 42066-3-B 45VQ42AC20 4 Tooth SAE D 8.46 42 65.92 CMD8 42066-7-B 45VQ42AC20 4 Tooth SAE D 8.46 42 65.92 C CMD5 42066-4-B 45VQ42AD20 4 Tooth SAE D 8.46 42 65.92 90 C CMD9 42066-8-B 45VQ42AD20 4 Tooth SAE D 8.46 42 65.92 90 C C CMD60 432647--B 45VQ42AA20 -/4 Straight 8.46 42 65.92 CMD64 432647-5-B 45VQ42AA20 -/4 Straight 8.46 42 65.92 C CMD6 432647-2-B 45VQ42AB20 -/4 Straight 8.46 42 65.92 90 CMD65 432647-6-B 45VQ42AB20 -/4 Straight 8.46 42 65.92 90 C CMD62 432647-3-B 45VQ42AC20 -/4 Straight 8.46 42 65.92 CMD66 432647-7-B 45VQ42AC20 -/4 Straight 8.46 42 65.92 C CMD63 432647-4-B 45VQ42AD20 -/4 Straight 8.46 42 65.92 90 C Max. PSI & Max. 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 49

Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 90 @ 800 Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above CMD67 432647-8-B 45VQ42AD20 -/4 Straight 8.46 42 65.92 90 C CMD36 42965--B 45VQ42A86A20 -/2 Straight 8.46 42 65.92 CMD40 42965-5-B 45VQ42A86A20 -/2 Straight 8.46 42 65.92 CMD37 42965-2-B 45VQ42A86B20 -/2 Straight 8.46 42 65.92 CMD4 42965-6-B 45VQ42A86B20 -/2 Straight 8.46 42 65.92 CMD38 42965-3-B 45VQ42A86C20 -/2 Straight 8.46 42 65.92 CMD42 42965-7-B 45VQ42A86C20 -/2 Straight 8.46 42 65.92 CMD39 42965-4-B 45VQ42A86D20 -/2 Straight 8.46 42 65.92 CMD43 42965-8-B 45VQ42A86D20 -/2 Straight 8.46 42 65.92 90 90 90 C 90 C CMD76 576269--B 45VQ47AA20 -/4 Straight 9.04 47 70.44 CMD77 576269-5-B 45VQ47AA20 -/4 Straight 9.04 47 70.44 CMD20 42067--B 45VQ50AA20 CMD24 42067-5-B 45VQ50AA20 CMD2 42067-2-B 45VQ50AB20 CMD25 42067-6-B 45VQ50AB20 CMD22 42067-3-B 45VQ50AC20 CMD26 42067-7-B 45VQ50AC20 CMD23 42067-4-B 45VQ50AD20 CMD27 42067-8-B 45VQ50AD20 Vickers Model See Note Above Shaft Displ 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D Ring Size 200 800 9.9 50 77.4 9.9 50 77.4 9.9 50 77.4 9.9 50 77.4 9.9 50 77.4 9.9 50 77.4 9.9 50 77.4 9.9 50 77.4 90 90 90 C 90 C CMD44 42966--B 45VQ50AA20 -/4 Straight 9.9 50 77.4 CMD48 42966-5-B 45VQ50AA20 -/4 Straight 9.9 50 77.4 CMD45 42966-2-B 45VQ50AB20 -/4 Straight 9.9 50 77.4 CMD49 42966-6-B 45VQ50AB20 -/4 Straight 9.9 50 77.4 CMD46 42966-3-B 45VQ50AC20 -/4 Straight 9.9 50 77.4 CMD50 42966-7-B 45VQ50AC20 -/4 Straight 9.9 50 77.4 CMD47 42966-4-B 45VQ50AD20 -/4 Straight 9.9 50 77.4 CMD5 42966-8-B 45VQ50AD20 -/4 Straight 9.9 50 77.4 Position 90 90 90 C 90 C CMD68 433252--B 45VQ50A86A20 -/2 Straight 9.9 50 77.4 CMD72 433252-5-B 45VQ50A86A20 -/2 Straight 9.9 50 77.4 Rot. C C C C C C C C C C C C C C C Max. PSI & Max. 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 50

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 90 @ 800 Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above CMD69 433252-2-B 45VQ50A86B20 -/2 Straight 9.9 50 77.4 CMD73 433252-6-B 45VQ50A86B20 -/2 Straight 9.9 50 77.4 CMD70 433252-3-B 45VQ50A86C20 -/2 Straight 9.9 50 77.4 CMD74 433252-7-B 45VQ50A86C20 -/2 Straight 9.9 50 77.4 CMD7 433252-4-B 45VQ50A86D20 -/2 Straight 9.9 50 77.4 CMD75 433252-8-B 45VQ50A86D20 -/2 Straight 9.9 50 77.4 90 90 90 C 90 C CMD78 62923--B 45VQ57AA20 -/4 Straight 0.97 57 85.48 CMD82 62923-5-B 45VQ57AA20 -/4 Straight 0.97 57 85.48 CMD79 62923-2-B 45VQ57AB20 -/4 Straight 0.97 57 85.48 CMD83 62923-6-B 45VQ57AB20 -/4 Straight 0.97 57 85.48 CMD80 62923-3-B 45VQ57AC20 -/4 Straight 0.97 57 85.48 CMD84 62923-7-B 45VQ57AC20 -/4 Straight 0.97 57 85.48 CMD8 62923-4-B 45VQ57AD20 -/4 Straight 0.97 57 85.48 CMD85 62923-8-B 45VQ57AD20 -/4 Straight 0.97 57 85.48 CMD28 42068--B 45VQ60AA20 CMD32 42068-5-B 45VQ60AA20 CMD29 42068-2-B 45VQ60AB20 CMD33 42068-6-B 45VQ60AB20 CMD30 42068-3-B 45VQ60AC20 CE26 42068-3 45VQ60A-C20 CMD34 42068-7-B 45VQ60AC20 CMD3 42068-4-B 45VQ60AD20 CMD35 42068-8-B 45VQ60AD20 Vickers Model See Note Above Shaft Displ 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE C 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D Ring Size 200 90 90 90 C 90 C.8 60 9.94.8 60 9.94.8 60 9.94.8 60 9.94.8 60 9.94.8 60 90.8 60 9.94.8 60 9.94.8 60 9.94 90 90 inlet (C) 90 C 90 C CMD52 42967--B 45VQ60AA20 -/4 Straight.8 60 9.94 CMD56 42967-5-B 45VQ60AA20 -/4 Straight.8 60 9.94 CMD53 42967-2-B 45VQ60AB20 -/4 Straight.8 60 9.94 CMD57 42967-6-B 45VQ60AB20 -/4 Straight.8 60 9.94 CMD54 42967-3-B 45VQ60AC20 -/4 Straight.8 60 9.94 CE33 42967-3 45VQ60A-C20 -/4 Straight.8 60 90 800 Position 90 90 inlet (C) Rot. C C C C C C C C C C C C C Max. PSI & Max. 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 5

Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 90 @ 800 CMD58 42967-7-B 45VQ60AC20 -/4 Straight.8 60 9.94 Pumps & Accessories Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CMD55 42967-4-B 45VQ60AD20 -/4 Straight.8 60 9.94 CMD59 42967-8-B 45VQ60AD20 -/4 Straight.8 60 9.94 90 C 90 C CMC93 46458--B 45VQ60A86A20 -/2 Straight.8 60 9.94 CJ28 46458-45VQ60A-86A20 -/2 Straight.80 60 89 800 inlet (A) CMC97 46458-5-B 45VQ60A86A20 -/2 Straight.8 60 9.94 CMC94 46458-2-B 45VQ60A86B20 -/2 Straight.8 60 9.94 CMC98 46458-6-B 45VQ60A86B20 -/2 Straight.8 60 9.94 CMC95 46458-3-B 45VQ60A86C20 -/2 Straight.8 60 9.94 CMC99 46458-7-B 45VQ60A86C20 -/2 Straight.8 60 9.94 CMC96 46458-4-B 45VQ60A86D20 -/2 Straight.8 60 9.94 Position 90 90 90 C CMD 46458-8-B 45VQ60A86D20 -/2 Straight.8 60 9.94 90 C : @ 800 and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Rot. C C C C C C Max. PSI & Max. 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 60.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 2200 75.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 52

ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 90 @ 800 Parts for Vickers 45VQ Vane Pumps Fluid Conveying Pneumatic Power & Control Miscellaneous Products Indexes & Technical Information Parts for Vickers 45VQ Vane Pumps Vickers Model Description CAK38 382 Bearing.02 CKF58 942356 Body 9.74 CLA89 0632 Bolt CE8 46435 Cartridge Kit - 42 22.04 CLB5 42234 Cartridge Kit - 47 CBP55 46436 Cartridge Kit - 50 2.88 CKA35 42233 Cartridge Kit - 57 2.79 CBP56 46437 Cartridge Kit - 60 2.82 CLB9 229633 Cover CBC42 27596 Key 0.03 CLB23 23975 Key CEG70 58630 Snap Ring 0.03 CEZ97 02949 Snap Ring 0.05 CBN20 394974 Shaft Seal 0.06 CBE86 233369 Shaft, -/4" Straight 3.35 CEG80 242885 Shaft, -/4", 4 Tooth 2/24DP Spline 2.00 CLB43 36760 Shaft, -/2" Straight CFA30 94878 Washer 0.05 53

Single & Tandem ydraulic Pumps Fixed Displacement Vane Pumps Miscellaneous Single & Tandem Vane Pumps Mfg. (Model No.) Miscellaneous Single & Tandem Vane Pumps Mfg. Name CKK69 70-009-032 Vickers 4.65 SAE C Displ in³/rev Mount Shaft Ports Rot. Other Features -/2 Straight CJC9 02-25443-7 3 Tooth (25VQTBS2A-2297CC-20L) Vickers 4.2 SAE B SAE B CEL32 02-25553-7 Vickers 4.98 SAE C 4T SAE-C SAE 4-Bolt Flange, 3, -/2 SAE 4-Bolt Flange, 2-/2, C SAE 4-Bolt Flange, 3, C -/4 VMQ Series Single Pump, SAE-B Spline Thru-Drive Coupling VQ Series Tandem Pump, SAE-B Rear Pump Mount, SAE-B Spline Thru-Drive Coupling VQ Series Tandem Pump, SAE-B Rear Pump Mount, SAE-B Spline Thru-Drive Coupling 45.00 9.9 6.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 54

ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Fixed Displacement Gear Pumps aldex Barnes W900 Series Gear Pumps To 3 @ 800 Up to 4000 PSI Up to 4000 Features: Through bore bushing type design constructed of high strength aluminum housings and cast iron end covers. Enhanced noise abatement with 3-tooth gears, superior trapping configuration and optimum gear profile. Efficiencies 90% overall, 98% volumetric, 92% mechanical. Application: Recommended for direct axial drive. For applications with radial and/or thrust loads, please contact us for application assistance. Pressure Limits: : (Varies with displacement. See table below). : 6 in. g vacuum to 29 PSI. Rated Speeds: Maximum speed varies with displacement (See table below). Minimum speed is 500 at maximum continuous pressure. Maximum System Temperature: 200 F continuous. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: ISO 4406 Cleanliness Level 8/4 or cleaner. Dimensions: page 546 Foot Brackets: page 84 Fluid Conveying aldex Barnes W900 Series Gear Pumps To 3 @ 800 Up to 4000 PSI Up to 4000 CAK3 Barnes Model 30393 (W9A08R3B0N) Displacement PressureRating (Continuous) Max Speed 0.488 in³/rev 4000 PSI 4000 800 3.8 Mtg Flange Shaft Ports Rotation SAE A Note: Minimum speed at Maximum Continuous Pressure is 500. 3/4 St. SAE-2 Side, SAE-0 Side Other Features 8.00 Indexes & Technical Information Miscellaneous Products 55

Single ydraulic Pumps Fixed Displacement Gear Pumps ydreco 500K Series Gear Pumps To 22 @ 800 Up to Up to 4000 Features: eavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: : (Varies with displacement. See table below). : 5 in. g vacuum to 50 psi. pressures over 50 psi require a case drain line be installed. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 80 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 0 Micron Absolute for maximum pump life. Dimensions: page 547 Foot Brackets: page 84 ydreco 500K Series Gear Pumps To 22 @ 800 Up to Up to 4000 ydreco Model Displacement PressureRating Max Speed.80 in³/rev CAK82 50KC3AAB 4000.77 in³/rev CAK92 55KC3AAB 3200 Note: Minimum speed under load is 600. 800 8.3 2.4 Mtg Flange Shaft Ports Rotation SAE A SAE A 5/8 St. x 2.25 Long 5/8 St. x 2.25 Long 3/4 NPT Side & Rear (Side Ports Plugged) 3/4 NPT Side & Rear (Side Ports Plugged) Bi-Rot. Bi-Rot. Other Features Shielded Outboard Bearing Shielded Outboard Bearing 22.59 8.65 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 56

Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Gear Pumps ydreco 500M Series Gear Pumps To 9 @ 800 Up to Up to 3200 Features: eavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. All models have mechanical face seal which allows for high inlet pressures with no case drain. Pressure Limits: :. : 5 in. g vacuum to 2000 psi. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 80 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 0 Micron Absolute for maximum pump life. Dimensions: page 549 Foot Brackets: page 84 ydreco 500M Series Gear Pumps To 9 @ 800 Up to Up to 3200 ydreco Model Displacement PressureRating Max Speed 0.738 in³/rev CAK78 506MC3EBB 3200.80 in³/rev CAK83 50MC3EBB 3000.467 in³/rev CAK88 52MC3EBB 2000.467 in³/rev CAK89 52MC3GBB 2000 Note: Minimum speed under load is 600. 800 5.8 8.3 0.4 0.4 Mtg Flange Shaft Ports Rotation SAE A SAE A SAE A 4-Bolt Foot Mount 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 3/4 NPT Rear Ports Bi-Rot. 3/4 NPT Rear Ports Bi-Rot. 3/4 NPT Rear Ports Bi-Rot. 3/4 NPT Rear Ports Bi-Rot. Other Features Shielded Outboard Bearing Shielded Outboard Bearing Shielded Outboard Bearing Shielded Outboard Bearing 7.07 6.79 24.75 24.75 Indexes & Technical Information Parts for ydreco 500M Series Pumps Part Number Description CDK90 SKO362 Seal Kit for 500M Series Pumps 0.7 57

Single ydraulic Pumps Fixed Displacement Gear Pumps Eaton Series 26 Gear Pumps To 24 @ 800 Up to Up to 3600 Features: 3-tooth gears minimize the flow ripple for reduced noise and vibration. Bearing lubrication system uses inlet oil instead of high pressure oil, improving volumetric efficiency. Innovative wear plate permits simple rotation change. Application: Rotation may be reversed by reconfiguring internal parts - no extra parts are required. Simply open the pump, switch the drive gear and idler gear, reposition the plug and reassemble. Side Load Limits - contact us for assistance. Pressure Limits: : Varies with displacement (See table below). : Maximum inlet vacuum at operating condition 6.0 In. g. Rated Speeds: Varies with displacement (See table below). Operating Temperatures: Minimum Operating -20 F. Maximum Continuous 220 F. Minimum Continuous Oil Viscosity 45 SSU. Dimensions: page 55 Foot Brackets: page 84 CJB79 CJB8 CJB83 CJB84 CEX65 CFD3 CJB85 CJM5 CFP92 C87 CJY29 CJB86 Eaton Series 26 Gear Pumps To 24 @ 800 Up to Up to 3600 Eaton Model 2600-RZG 26002-RZC 26003-RZG 26003-RZJ 26004-RAF 26004-RZC 26004-RZE 26004-RZG 26005-RZC 26005-RZE 26006ZC 26006-RZC Displacement PressureRating Max Speed 0.400 in³/rev 3600 0.500 in³/rev 3600 0.580 in³/rev 3600 0.580 in³/rev 3600 0.660 in³/rev 3600 0.660 in³/rev 3600 0.660 in³/rev 3600 0.660 in³/rev 3600 0.840 in³/rev 3600 0.840 in³/rev 3600.020 in³/rev 3600.020 in³/rev 3200 800 3. 3.9 4.5 4.5 5. 5. 5. 5. 6.5 6.5 7.9 7.9 Mtg Flange Shaft Ports Rotation SAE A 5/8 St. SAE-2 Side, SAE-0 Side SAE A 3/4 St. x -/4 long SAE-6 Side, SAE-0 Side SAE A 5/8 St. SAE-2 Side, SAE-0 Side SAE A SAE A SAE A SAE A 3/4 St. x 2 inches long 3/4 St. x -/4 long SAE-2 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE A 5/8 St. SAE-2 Side, SAE-0 Side SAE A SAE A SAE A SAE A 3/4 St. x -/4 long 3/4 St. x -/4 long 3/4 St. x -/4 long SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side Other Features 4.78 4.86 5.00 4.93 5.5 5.64 5.08 6.43 5.45 6.55 C 6.90 5.65 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 58

ydraulic Power & Control Pneumatic Power & Control Pumps & Accessories Single ydraulic Pumps Fixed Displacement Gear Pumps CJY3 CJB88 CJB89 CJY32 CJY34 CJY36 Eaton Series 26 Gear Pumps To 24 @ 800 Up to Up to 3600 Eaton Model 26007ZC 26007-RZC 26007-RZE 2600-RZC 260-RZC 2602-RZJ Displacement PressureRating Max Speed.200 in³/rev 3200.200 in³/rev 3200.200 in³/rev 2850 PSI 3200.54 in³/rev 3000 PSI 3000.69 in³/rev 3000 PSI 3000.77 in³/rev 950 PSI 3000 800 9.3 9.3 9.3 2.0 3. 3.7 CJD39 2603ZC.870 in³/rev 3000 4.5 Note: Minimum speed at rated pressure is 750. Mtg Flange Shaft Ports Rotation SAE A SAE A SAE A SAE A SAE A SAE A SAE A 3/4 St. x -/4 long 3/4 St. x -/4 long 3/4 St. x -/4 long 3/4 St. x -/4 long 3/4 St. x -/4 long SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-2 Side, SAE-0 Side SAE-6 Side, SAE-0 Side Other Features C 7.0 4.84 5.80 7.50 7.90 7.99 C 6.8 Fluid Conveying Miscellaneous Products Eaton L2 Series Gear Pumps To 26 @ 800 Up to 3600 PSI Up to 3500 Pressure Limits: : Varies with displacement (See table below). : Maximum inlet vacuum at operating condition 6.0 In. g. Rated Speeds: Varies with displacement (See table below). Operating Temperatures: Minimum Operating -20 F. Maximum Continuous 225 F. Dimensions: page 552 Foot Brackets: page 84 Indexes & Technical Information CJX97 CJX98 Eaton L2 Series Gear Pumps To 26 @ 800 Up to 3600 PSI Up to 3500 Eaton Model 2550-RSC 25503-RSA Displacement PressureRating Max Speed.55 in³/rev 3600 PSI 3000 2.05 in³/rev 3600 PSI 2750 800 2.0 5.9 Mtg Flange Shaft Ports Rotation SAE B SAE B 7/8 Straight 3 Tooth SAE B SAE-20 Side, SAE-2 Side SAE-20 Side, SAE-2 Side Other Features 4.00 4.00 59

Single ydraulic Pumps Fixed Displacement Gear Pumps CJY 25504SC 2.33 in³/rev 3600 PSI 2750 8. 2.33 in³/rev 3600 CJY2 25504-RSC PSI 2750 8. Note: Minimum speed at rated pressure is 750. SAE B 7/8 Straight Pumps & Accessories Eaton L2 Series Gear Pumps To 26 @ 800 Up to 3600 PSI Up to 3500 Eaton Model Displacement PressureRating Max Speed 800 Mtg Flange Shaft Ports Rotation SAE B 7/8 Straight SAE-20 Side, SAE-2 Side SAE-20 Side, SAE-2 Side C 5.20 5.7 Parts for Eaton L2 Series Gear Pumps Part Number Description CJX96 25500-90 Seal Kit for Plain Pump 0.20 Permco Box Pumps For PTO Applications To 46 @ 800 2000 Other Features Features: Sized to interchange with Muncie PTO pumps (See table below for Muncie numbers). Special iron alloy used for shaft covers, gear housings, bearing carriers and port end cover castings. Gears are cut to extremely close tolerances, and are shaped (rather than hobbing and shaving) for maximum volumetric efficiency. Application: Pumps are stocked with Permco's "Continental Shaft" (Shaft can be changed without pump disassembly by removing shaft retaining snap ring and pulling shaft and bearing out). This allows for an easy shaft change to satisfy various applications. All pumps have both side and rear ports (The 2 unused ports need to be plugged). All pumps are bi-rotational and may be used as bi-rotational motors (Case drain is drilled and plugged for use as a motor). Pressure Limits: :. : Not to exceed 0 in. g vacuum at 200, 7 in. g vacuum at 800, or a positive pressure greater than 20 PSI. Rated Speeds: 2000. Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 50 F. Never to exceed 85 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B0 rating of at least 2.2. Dimensions: page 553 Foot Brackets: page 84 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 60

ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Fixed Displacement Gear Pumps CDG94 CDG95 CDG96 Permco Box Pumps For PTO Applications To 46 @ 800 2000 Permco Model PEK0C PEK5C PEK20C CDG97 PEL7C CDG98 PEL20C CDG99 PEL22C CD PEL25C Displacement PressureRating Max Speed 2.000 in³/rev 2000 3.000 in³/rev 2000 4.000 in³/rev 2000 4.500 in³/rev 2000 5.50 in³/rev 2000 5.790 in³/rev 2000 6.400 in³/rev 2000 800 Mtg Flange Shaft Ports Rotation 3.5 2/4-Bolt SAE B 2.5 2/4-Bolt SAE B 29.0 2/4-Bolt SAE B 33.0 37.0 4.0 46.0 4-Bolt SAE B 4-Bolt SAE B 4-Bolt SAE B 4-Bolt SAE B 3 Tooth SAE B 3 Tooth SAE B NPT Side and Rear Bi-Rot. NPT Side and Rear Bi-Rot. 3 Tooth SAE B -/4 NPT Side, NPT Rear Bi-Rot. 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B -/4 NPT Side and Rear Bi-Rot. -/4 NPT Side and Rear Bi-Rot. -/4 NPT Side and Rear Bi-Rot. -/2 NPT Side, -/4 NPT Rear Bi-Rot. Other Features Replaces Muncie PK8 Replaces Muncie PK3 Replaces Muncie PK7 Replaces Muncie PL9 Replaces Muncie PL23 Replaces Muncie PL25 Replaces Muncie PL27 32.95 2.00 38.65 47.00 47.00 49.52 47.00 Indexes & Technical Information Miscellaneous Products Fluid Conveying 6

Single ydraulic Pumps Fixed Displacement Gear Pumps Miscellaneous Single Gear Pumps Mfg. Mfg. Name CAK60 43A-F36 ydreco.36 CFF44 43A-F37 ydreco.36 CJP97 CJJ48 CG65 CGG92 P257A367SPLZA5- (P257A367SPLZA5-6) P5000C53ADXK25 (P5000C53ADXK25-4) 690506 (P5000C53ADZK25-4) P55A224AAXQ22- (P55A224AAXQ22-5 4) Permco 3.86 Permco 6.43 Permco 6.43 Permco 5.70 CKM88 P55A23AAZA25- Permco 8.79 Miscellaneous Single Gear Pumps Displ in³/rev Mount Shaft Ports Rot. Other Features SAE-A- SAE-A- SAE-C 4-Bolt SAE-B 4-Bolt SAE-B 4-Bolt SAE-B 2/4-Bolt SAE-B- 4-Bolt 5/8 Straight --/2 NPT x, SAE-0 -/2", /2-4 Long, NPT Tank Woodruff Port Key 5/8 Straight --/2 NPT x, SAE-0 -/2", /2-4 Long, NPT Tank Woodruff Port Key 4T SAE-C 3T SAE-B -/4 NPT Side C Bi-Rot Integral Relief Valve, Tach Drive Integral Relief Valve, Tach Drive With outboard bearing, cast iron design, sleeve bearings With outboard bearing, cast iron design, roller bearings 3T SAE-B SAE-20 Side Bi-Rot With outboard bearing, cast iron design, roller bearings 3T SAE-B 3T SAE-B -/2 NPT Side & Rear -/2 NPT, -/2 NPT.05.52 60.00 35.00 52.68 Bi-Rot 46.24 Bi-Rot 46.24 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 62

ydraulic Power & Control Pneumatic Power & Control Pumps & Accessories Single ydraulic Pumps Variable Displacement Vickers PVE Series Piston Pumps To 2 @ 800 Vickers PVE Piston Pumps For Mobile Applications Pressure Limits: : (Varies with displacement. See table below). Case: 5 PSI. : 5 in. g vacuum to 30 PSI. Rated Speed: Sizes 9 & 2: 200 @ 5 in. g, 2400 @ 0 psig, 2800 @ 5 psig. Size 2: 3000 @ 0 psig. For overspeed limits contact us for details. Seals: Viton standard. Recommended Filtration: ISO level 8/6/4 (<), level 7/5/3 (2000-3000 PSI). Recommended Fluid Viscosity: 80-80 SSU (Running). System Temperature: 0 F to 50 F (Optimum Range). Note: Ratings based on using anti wear hydraulic fluid or automotive type crankcase oil designations SC, SD, SE or SF per SAE J83FEB80. For information on use with fire resistant fluids, contact us for assistance. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 56 Foot Brackets: page 84 Miscellaneous Products Indexes & Technical Information Fluid Conveying Vickers Part No. CJV32 02-34826 Vickers PVE Piston Pumps For Mobile Applications Vickers Model PVE9AR08AA0B 200A0000C D0A Displacement & Pressure Rating 2.50 in³/rev 800 9.4 Control Pressure Comp Load Sense Mounting Flange Shaft Other Features SAE B-B 5T SAE B-B Rotation, Side SAE-24 SAE-6, Top SAE-0 Case Drain, Compensator Setting, 60 PSI Load Sense Bias Setting with Bleed-Down Orifice Parts for Vickers PVE Pumps Part Number Description CKF37 923948 Rotating Group, Model 9 6.25 CKF36 923947 Rotating Group, Model 2 6.23 CKA74 42546 Wafer Plate, C Rotation, Model 2 0.35 52.00 63

Single ydraulic Pumps Variable Displacement Vickers PVQ Series Piston Pumps To 30 @ 800 Vickers PVQ Piston Pumps For Industrial Applications Low Noise / 800 Capability PVQ piston pumps are quiet, in-line, variable displacement units with pressure compensator and/or flow compensator (load-sense) controls. These pumps operate at quietness levels that meet today's demanding industrial conditions. Pressure Limits: : (Varies with displacement. See table below). Case: 5 PSI. : 5 in. g vacuum to 30 PSI. Rated Speed: 800. Seals: Viton standard. Recommended Filtration: ISO level 8/6/4 (<), level 7/5/3 (2000-). Recommended Fluid Viscosity: 80-80 SSU (Running), 2300 SSU Maximum at Startup. System Temperature: 0 F to 50 F (Optimum Range), 0 F to 80 F (Extreme Range). Note: Ratings based on using anti wear hydraulic fluid or automotive type crankcase oil designations SC, SD, SE or SF per SAE J83FEB80. For information on use with fire resistant fluids, contact us for assistance. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 564 Foot Brackets: page 84 Vickers PVQ Piston Pumps For Industrial Applications Low Noise / 800 Capability Vickers Vickers Model CJR3 02-34576 PVQ0-A2R-SES- 20-C2-2 CJR28 02-34552 PVQ20-B2R-SES- 2-C2-2 CJV5 02-34685 PVQ32-B2R-SES- 2-C4-2 Displacement & Pressure Rating 0.64 in³/rev.29 in³/rev 2.0 in³/rev 800 Control See Below 4.98 C2 0.0 C2 5.66 C4 Mounting Flange Shaft Other Features SAE A SAE B SAE B 3/4 Straight 7/8 Straight 7/8 Straight Rotation, SAE-2 Rear Main Ports, SAE-6 Case Drain Rotation, SAE-2 Rear Main Ports, SAE-8 Case Drain Rotation, SAE-2 Rear Main Ports, SAE-8 Case Drain CM7 Control: Pressure Compensated (350-500 PSI range, set 000 PSI) C2VB Control: Pressure Compensated (350- range, set ) and Load Sensing (50-250 PSI differential range, set at 60 PSI), with Bleed-Down orifice C2 Control: Pressure Compensated (350- range, set ) C9 Control: Pressure Compensated (350- range, set 2850 PSI) C4 Control: Pressure Compensated (350- range, set ) 25.30 3.00 34.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 64

ydraulic Power & Control Single ydraulic Pumps Variable Displacement Vickers PVQ Series Piston Pumps To 30 @ 800 Parts for Vickers PVQ Piston Pumps Part Number Description CCB76 999 Standard Buna-N Seal Kit for PVQ0/3 Models 0.08 CDX95 626933 Standard Buna-N Shaft Seal for PVQ40/45 0.06 CBM27 343573 Standard Buna-N Shaft Seal for PVQ20/32 Models 0.05 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control 65

Single ydraulic Pumps Variable Displacement Eaton Medium Duty Piston Pumps To 32 @ 800 Eaton Medium Duty Piston Pumps For Mobile Applications igh Pressure / igh Speed Capability Features: Compact, lightweight aluminum housing. Continuous Rated Pressure:. Maximum Intermittent Pressure: 4000 PSI for.6 in³ and 2.32 in³ models, 3800 PSI for 2.77 in³ models, 4500 PSI for 4.2 in³ models. Continuous Allowable Case Pressure: 25 PSI. Maximum Continuous Vacuum: 4 in. g. for.6 in³ models, 3 in. g. for 2.32 in³ models, 2 in. g. for 2.77 and 4.2 in³ models, Temperature Limits: -20 F to 225 F. Recommended Filtration: ISO 4406 Cleanliness Level 8/3 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 556 Foot Brackets: page 84 Eaton Medium Duty Piston Pumps For Mobile Applications igh Pressure / igh Speed Capability CJM62 Eaton Part No. 7022-RCA CKK68 7022-R CKC97 CBY63 CBY64 CKD62 7022-RBB 70423-RBT 70523AB 70553-RAB Displacement & Speed Rating.6 in³/rev 2500.6 in³/rev 2500.6 in³/rev 2500 2.77 in³/rev 3000 4.2 in³/rev 2500 4.2 in³/rev 2500 800 9.0 9.0 9.0 2.5 32.8 32.8 Control Pressure Compensated Pressure Compensated Pressure Compensated Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Mounting Flange Shaft Other Features SAE A SAE A SAE A SAE BB 2-4-Bolt SAE C 2-4-Bolt SAE C 3/4 Rotation, Rear Ports (SAE-4, Straight SAE-2 ), SAE-6 Case Drain, 3000 PSI Compensator Setting (Adjustable) 9T SAE Rotation, Rear Ports (SAE-4, A SAE-2 ), SAE-6 Case Drain, 3000 PSI Compensator Setting (Adjustable) 9T SAE Rotation, Rear Ports (SAE-2, A SAE-0 ), SAE-6 Case Drain, 2800 PSI Compensator Setting (Adjustable) Rotation, Rear Ports (SAE-20, 3T SAE-6 ), SAE-6 Case Drain, 3000 SAE B PSI Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Non-adjustable) 4T SAE C 4T SAE C C Rotation, Side Ports (2 Inch Code 6 Flange, Inch Code 6 Flange ), SAE-0 Case Drain, Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Non-adjustable) Rotation, Side Ports (2 Inch Code 6 Flange, Inch Code 6 Flange ), SAE-0 Case Drain, Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Non-adjustable) 8.00 8.00 8.00 26.00 78.00 78.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 66

ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Variable Displacement Eaton Medium Duty Piston Pumps To 32 @ 800 Parts for Eaton Medium Duty Piston Pumps Part Number Description CFA80 70422-95 Seal Kit for Models 70422 and 70423 0.6 CKC99 7042-938 Seal Repair Kit, Models 7042-7044-7045 0.05 CKD57 70523-900 Seal Repair Kit, Model 70523 0.8 CJS78 007022-902 Seal Repair Kit, Model 7022 0.08 CJX45 6253-6 Shaft Seal, Model 7022 0.02 CJX46 6253-8 Shaft Seal, Model 70422 0.04 CJX44 6232-22 Shaft Seal, Model 70523 0.4 Indexes & Technical Information Miscellaneous Products Fluid Conveying 67

Single ydraulic Pumps Variable Displacement Eaton 420 Series Mobile Piston Pumps To 38 @ 800 Eaton 420 Mobile Piston Pumps igh Pressure / igh Speed Capability Pumps & Accessories Eaton s 420 Series mobile pumps are open circuit, axial piston designs with displacements of 2.50 in³/rev, 3.00 in³/rev, 3.80 in³/rev and 4.88 in³/rev for operating speeds up to 2,650 rpm. They are available with a variety of control options to match their performance to a broad range of mobile applications. Features: ighly efficient pump controls Strong, field-proven rotating group Saddle-type swashplate with steel-backed polymer bearings and a pressure lubrication passage to reduce wear Stiff swashplate reduces deflection, allows for evenly loaded bearings & extends unit life Single control piston reduces forces acting on swashplate & reduces package size Bimetal timing plate improves pump filling characteristics which reduces fluid-borne noise and extends pump life. Pressure Ratings: 2.50 in³/rev thru 3.80 in³/rev Models: 4060 psi Continuous, 4600 psi Intermittent, 5000 psi Peak. 4.88 in³/rev Models: 3050 psi Continuous, 3335 psi Intermittent, 3625 psi Peak. Speed Ratings: 2.50 in³/rev & 3.00 in³/rev Models: 2650 rpm @ 0 psig, 2450 rpm @ 5 in.g, 2950 rpm @ 5 psig, 3600 rpm Max Standby. 3.80 in³/rev Models: 2600 rpm @ 0 psig, 2400 rpm @ 5 in.g, 2800 rpm @ 5 psig, 3600 rpm Max Standby. 4.88 in³/rev Models: 2200 rpm @ 0 psig, 800 rpm @ 5 in.g, (N/A) rpm @ 5 psig, 3600 rpm Max Standby. Note: All models have a 600 Minimum Speed. Pressure: 0 PSIG Rated, 5 in.g Minimum, 50 PSIG Maximum. Case Pressure: 5 psig Maximum Continuous, 30 psig Maximum Intermittent, 75 psig Peak. Operating Temperature: 200 F Rated, -35 F Minimum, 220 F Maximum. Recommended ydraulic Fluid: Use antiwear hydraulic oil, or automotive type crankcase oil (designations SC, SD, SE or SF) per SAE J83 FEB80. ydraulic Fluid Viscosity: 80 to 88 SSU Recommended Operating Range, 92 SSU Maximum Continuous, 9720 SSU Maximum at Startup. Recommended Filtration: ISO 4406 Cleanliness Level 2/8/3 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 557 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 68

Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Variable Displacement Eaton 420 Series Mobile Piston Pumps To 38 @ 800 CZ85 CKG78 CKK35 CKA62 CKA64 CKA63 CKA65 Eaton 42AK00694A 42AK00694B 42AK0292B 42AK0039B 42AK00393B 42AK00392B 42AK00394B Eaton 420 Mobile Piston Pumps igh Pressure / igh Speed Capability Displacement & Pressure Rating 2.50 in³/rev 4060 PSI 2.50 in³/rev 4060 PSI 3.80 in³/rev 4060 PSI 3.80 in³/rev 4060 PSI 3.80 in³/rev 4060 PSI 3.80 in³/rev 4060 PSI 4.88 in³/rev 3050 PSI 800 9.4 9.5 29.6 29.6 29.6 29.6 38 Control Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Mounting Flange Shaft Other Features SAE B SAE B SAE BB SAE BB 2/4-Bolt SAE C 2/4-Bolt SAE C 2/4-Bolt SAE C Rotation, Code 6 Flange Rear Ports 2" ", Top SAE-2 Case 3T Drain, SAE-4 Load Sense, SAE B Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Adjustable), External Manual Stroke Adjustment, Standard Polyacrylate Shaft Seal 3T SAE B 5T 5T 4T SAE C 4T SAE C 4T SAE C Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 3050 PSI Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal, External Manual Stroke Adjustment Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 2850 PSI Compensator Setting (Adjustable), 455 PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal, External Manual Stroke Adjustment Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 3550 PSI Compensator Setting (Adjustable), 45 PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 3550 PSI Compensator Setting (Adjustable), 45 PSI Load Sense Bias (Adjustable), Single Viton Shaft Seal Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 3550 PSI Compensator Setting (Adjustable), 290 PSI Load Sense Bias (Adjustable), Aux Rear Mount SAE B 2 Bolt 5T Spline, Single Viton Shaft Seal Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, Compensator Setting (Adjustable), 45 PSI Load Sense Bias (Adjustable), Single Viton Shaft Seal 35.00 57.00 35.00 58.00 55.00 62.00 57.00 Indexes & Technical Information 69

Double ydraulic Pumps Fixed Displacement Vickers V200 Series Vane Pumps To 9.5/0.5 @ 800 Vickers V200 Double Vane Pumps For Industrial & Mobile Applications Double pumps provide a single power source capable of serving two separate hydraulic circuits, resulting in a more compact, simple installation. Features: Vickers balanced vane construction. Buna-N seals standard. Shaft rotation can be changed by changing the assembly of internal parts. Ports: : -/2 inch Code 6 Flange. Front Pump (Shaft End) : SAE-6 Straight Thread. Rear Pump (Cover End) : SAE-8 Straight Thread. Application Information: page 53 Dimensions: page 536 Foot Brackets: page 84 Pumps are stocked as shown in table. ANY outlet position and rotation is available for same-day shipment. Vickers V200 Double Vane Pumps For Industrial & Mobile Applications Vickers Part No. Vickers Model Shaft CZV47 02-465603-5 V200-F6S2S-AA -2L 3 Tooth SAE B Mtg Flange Displ Front Rear SAE B.9 0.40 Ring Size 200 Front Rear 800 Front Rear Port Loc Front Rear 6/2 9.0/3.0 A/A Max PSI Front Rear 2500 2500 Max Rot. 3000 C 30.00 Note: : @ 800 and 00 PSI. Displacement: Cubic inches per revolution. Max PSI & based on using petroleum oil at 20 F and at 0 PSI inlet pressure. Min speed: 600. Vickers V200 Double Vane Pumps Replacement Parts List Part Number Description CCC33 92347 Cartridge Kit, Cover End, Ring Size 0.3 CCC32 923470 Cartridge Kit, Cover End, Ring Size 02.33 CCC35 923496 Cartridge Kit, Cover End, Ring Size 03.30 CCC3 923469 Cartridge Kit, Cover End, Ring Size 04.82 CCC30 923468 Cartridge Kit, Cover End, Ring Size 05.79 CCC36 923497 Cartridge Kit, Cover End, Ring Size 06 2.23 CCC37 923498 Cartridge Kit, Cover End, Ring Size 07 2.20 CAA63 00278 Screw for bolting on Cover End, Ring Sizes 06 & 07, (4) required 0.2 CCC39 923577 Seal Kit, Buna-N 0.09 CBD93 229236 Shaft Seal, Buna-N 0.04 CDU27 009955 Shaft Key, 3/6 x -/4 0.0 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 70

Double ydraulic Pumps Fixed Displacement Miscellaneous ydraulic Power & Control Miscellaneous Double Vane Pumps Fluid Conveying Pneumatic Power & Control CE65 Mfg. (Model No.) 02-3720-2 (2520V2A4-BB22R) Mfg. Name Vickers CKK70 7-025-032 Vickers CKK72 72-057-032 Vickers CKK7 72-056-032 Vickers CKK74 74-0066-032 Vickers Miscellaneous Double Vane Pumps Displ in³/rev Front Rear Mount Shaft Ports Rot. 4.0 Front 2.80 Rear 2.75 Front.96 Rear 6.83 Front 4.33 Rear 6.83 Front 4.33 Rear 8.54 Front 6.83 Rear SAE B SAE B SAE C SAE C SAE C 7/8 Straight 5T SAE-BB -/4 Straight -/4 Straight -/2 Straight SAE 4-Bolt Flange, 2-/2, s Front 3/4 Rear SAE 4-Bolt Flange, 3, s Front Rear SAE 4-Bolt Flange, 3, s -/4 Front Rear SAE 4-Bolt Flange, 3, s -/4 Front Rear SAE 4-Bolt Flange, 4, s -/2 Front -/4 Rear C C Other Features V Series Double Pump VMQ Series Double Pump VMQ Series Double Pump VMQ Series Double Pump VMQ Series Double Pump 46.97 30.50 26.00 90.00 Indexes & Technical Information Miscellaneous Products CJM66 CJM65 74-008-032 (VMQ24535S2525B0000A Vickers AADCANL00A032) 74-0080-032 (VMQ24535S2525B0000A Vickers AABBANR00A032) CKK73 73-0068-032 Vickers CJD62 CBP94 C36 C35 74-0067-032 (VMQ24535S402B0000A Vickers AABBANR00A032) 43099-4 (2520VQ2A-DD20) 02-4208-F (4520VQ-60A8-86AD-20L) 02-4208- (4520VQ60A8-86AA20) Vickers Vickers Vickers 3.2 Front 7.63 Rear 3.2 Front 7.63 Rear 4.65 Front 4.88 Rear 8.54 Front 6.83 Rear 2.45 Front 2.22 Rear.80 Front.67 Rear.80 Front.67 Rear SAE C SAE C SAE C SAE C -/2 Straight -/2 Straight -/2 Straight -/2 Straight 3 Tooth SAE B SAE B SAE C SAE C -/2 Straight -/2 Straight SAE 4-Bolt Flange, 4, s -/2 Front -/4 Rear SAE 4-Bolt Flange, 4, s -/2 Front -/4 Rear SAE 4-Bolt Flange, 3-/2, s -/2 Front Rear SAE 4-Bolt Flange, 4, s -/2 Front -/4 Rear SAE 4-Bolt Flange, 2-/2, s Front 3/4 Rear SAE 4-Bolt Flange, 3-/2, s -/2 Front 3/4 Rear SAE 4-Bolt Flange, 3-/2, s -/2 Front 3/4 Rear C C VMQ Series Double Pump VMQ Series Double Pump VMQ Series Double Pump VMQ Series Double Pump VQ Series Double Pump VQ Series Double Pump VQ Series Double Pump 90.00 90.00 90.00 90.00 45.00 30.00 7

Double ydraulic Pumps Fixed Displacement Miscellaneous Parts for Miscellaneous Double Fixed Vane Pumps Part Number Description CKF32 92374 V2020 Series, Seal Kit 0. CAA76 00705 VQ Series, Bearing for 2520VQ 0.3 CBP54 46427 VQ Series, Cartridge Kit Cover End for **20VQ**, Ring Size 5.02 CCB87 920040 VQ Series, Seal Kit for 2520VQ, Std Single Seal, Buna-N 0.5 CDZ94 920056 VQ Series, Seal Kit for 3525VQ, Std Single Seal, Buna-N 0.7 CEU37 920072 VQ Series, Seal Kit for 4535VQ, Optional Double Seal, Buna-N 0.2 CB9 254848 VQ Series, # 3T SAE-B Shaft for 2520VQ.4 CEF60 289084 VQ Series, # 4T SAE-C Shaft 4535VQ 3.8 CKF95 920048 VQ Series, Shaft Seal Kit, Single Shaft Seal, 3520VQ 0.7 CAK38 382 V Series, Bearing for 45**V.02 CKF58 942356 V Series, Body Kit, 4520V 9.74 CEG4 02-02555 V Series, Cartridge Kit Shaft End for 3520V-38*-22, Ring Size 38 4.00 CCB93 922856 V Series, Seal Kit for 2520V7, Buna-N 0. CEG73 9344 V Series, Snap Ring for 3525V 0.02 Miscellaneous Double Gear Pumps CZT99 Mfg. Model 26504-RBN (ACMAR049904AC0006000 0A00000B0B) Mfg. Name Eaton Miscellaneous Double Gear Pumps Displ in³/rev Front Rear Mount Shaft Ports Rot. 0.66 Front 0.66 Rear SAE A 3/4" Straight SAE-20 SAE-0 s Other Features Longer Slip-Fit Key 9.78 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 72

ydraulic Power & Control Pumps & Accessories Dump Pumps Pump/Valve Assemblies For Dump Trucks & Trailers Introduction to Dump Pumps Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control In applying the Permco Dump Pump, an understanding of the 2ine and 3ine circuits is essential for proper operation and maximum unit life. 2ine Operation: In the 2ine Operation, one line is connected from the oil tank to the inlet of the pump, and one line is connected from the cylinder port of the valve to the cylinder. With the pump engaged and the valve spool in the neutral position, oil will recirculate inside the unit. It has been determined through testing that the raise in temperature per every minute of operation in this mode is 7-/2 F. If operation is allowed to continue beyond the recommended 5 minute time interval, a reduction in clearances of the rotating group due to excessive heat and subsequent expansion will occur. The result may lead to the unit locking up and premature failure of the drive shaft or other internal components. 3ine Operation: In the 3ine Operation, one line is connected from the oil tank to the inlet of the pump, one line is connected from the cylinder port of the valve to the cylinder and one line is connected from the pump's return port back to the oil tank. A metal sleeve is inserted into the inlet port of the valve which diverts flow back to tank from either the cylinder retracting or from the valve spool being in neutral. eating of the oil is reduced with a 3ine circuit, but is not eliminated. 0 minutes is the maximum recommended time to allow the pump to be engaged and the valve spool in neutral with a 3ine circuit. CAUTION: Operation with the 3ine Sleeve installed in a 2ine application is potentially hazardous. Shaft Seal Life: Like any control valve, there are inherent pressure drops within the dump pump due to internal core configurations. During cylinder retraction, fluid velocities may increase to a point that excessive back pressures may be seen at the pump shaft seal area. For this reason, Permco installs high pressure motor shaft seals in all dump pump units to prevent premature shaft seal failure. It is also suggested that movement of the valve spool from the neutral to the raise position in rapid succession be avoided as this may also contribute to the premature failure of the shaft seal. 73

Dump Pumps Pump/Valve Assemblies For Dump Trucks & Trailers Permco DM400 Series Dump Pumps For Light & Medium Duty Dump Trucks Features: Rugged cast iron, roller bearing pump construction. igh strength alloy steel gear and shaft set. Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges. 00% factory tested. -/4 NPT inlet port, 3/4 NPT pressure port, 3/4 NPT return port (for 3rd line). Built in direct acting relief valve set at factory provides protection to both the pump and to the cylinder. Manual Shift standard. Built-in load check. Neutral Lockout device preventing accidental lowering of the dump body. Application: See Introduction To Dump Pumps at the beginning of this section for details on 2ine and 3ine Operation. Pressure Limit:. Rated Speed: 2400. Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 50 F. Never to exceed 85 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B0 rating of at least 2.2. Dimensions: page 554 Permco DM400 Series Dump Pumps For Light & Medium Duty Dump Trucks Permco Model Mount CCN69 DMD-400-20-ZL-200 CCN70 DMR40020ZL200 Direct Remote Displacement PressureRating Max Speed 4.000 in³/rev 2400 4.000 in³/rev 2400 800 Circuit Type Remote Mount Valve Location Direct Mount Rotation Relief Setting (PSI) 2.5 3ine -- C 2000 2.5 3ine Left Side -- 2000 Other Features Replaces Commercial G02-2-20L Replaces Commercial G0-2-20 Note: To convert a 3ine model for use in a 2ine circuit, remove the metal sleeve in the inlet port of the valve, and install a 3/4 NPT plug in the return port. 40.08 30.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 74

Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Dump Pumps Pump/Valve Assemblies For Dump Trucks & Trailers Permco DMD/DM640 Series Dump Pumps For Medium & eavy Duty Dump Trucks Features: Rugged cast iron, roller bearing pump construction. igh strength alloy steel gear and shaft set. Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges. 00% factory tested. -/4 NPT inlet port, 3/4 NPT pressure port, 3/4 NPT return port (for 3rd line). Built in direct acting relief valve set at factory provides protection to both the pump and to the cylinder. Manual Shift standard. Built-in load check. Neutral Lockout safety cap for use with pull-out cable. 2 extra long studs for easy installation of pump support bracket on Direct Mount models. Application: See Introduction To Dump Pumps at the beginning of this section for details on 2ine and 3ine Operation. Pressure Limit:. Rated Speed: 2400. Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 50 F. Never to exceed 85 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B0 rating of at least 2.2. Dimensions: page 555 Permco DMD/DM640 Series Dump Pumps For Medium & eavy Duty Dump Trucks Permco Model CCN68 DMD-25-Z-MS-20 CCN66 DM-640-25-ZR-M-T-200 Mtg. Style Direct Remote Displacement PressureRating Max Speed 6.400 in³/rev 2400 6.400 in³/rev 2400 800 Circuit Type Remote Mount Valve Location Direct Mount Rotation Relief Setting (PSI) 46.0 3ine -- C 2000 46.0 3ine Right Side -- 2000 Other Features Replaces Commercial C02D25 Replaces Commercial C0D25 Note: To convert a 3ine model for use in a 2ine circuit, remove the metal sleeve in the inlet port of the valve, and install a 3/4 NPT plug in the return port. 63.00 Indexes & Technical Information 75

Refuse Pump System Permco Versa-Pak Refuse Pump System Permco Versa-Pak Refuse Pump System The Versa-Pak Refuse Pump System is available in two configurations. Dry Valve System: The Versa-Pak Valve in a Dry Valve System functions as a pressure compensated flow control. This limits flow to the hydraulic system allowing a preset amount to the system with the excess flow being returned to the tank at low pressure. This reduces repairs and downtime associated with overspeeding and overpressurizing the hydraulic system. The Dry Valve eliminates heat build-up in the hydraulic system associated with large flows when the system is not in use (Operator controls with switch or air valve). Unloader System: The Versa-Pak Valve in an Unloader System functions as a pressure compensated flow control and an unloader. The unloader diverts 00% of the flow back to tank at extremely low pressure when the hydraulic system is not required (Operator controls with switch). Versa-Pak Pump Features: 25% longer idler gear bearings to reduce shaft deflection and extend life. Sealed outboard bearing with protective shield to keep out contamination. Dowel pin construction. Solid one-piece gear and shaft set. Bleed valve built into rear cover (Dry Valve models). Versa-Pak Valve Features: Tamper-resistant flow regulation. Dry Valves: Easily operated by a dash mounted electric over air switch or manual air valve. Includes breather vent, tubing and fittings. Note: Please contact us for application assistance with the Versa-Pak System. Permco Model Description Versa-Pak Pump, Control Valve set at 55. 42 @ 200, 9.099 CKN74 VP42-4COFLFC55 cu.in. per rev displacement, 4-Bolt SAE-C Mounting Flange, -/4" Shaft, C 50.00 Rot CDR58 VP42-4COFLDV Versa-Pak Pump, Dry Valve Function. 42 @ 200, 9.099 cu.in. per rev displacement, 4-Bolt SAE-C Mounting Flange, -/4" Shaft, C Rot 50.00 CCC88 999-00948 Solenoid, Unloader Function. 0.55 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 76

ydraulic Power & Control Pneumatic Power & Control Power Steering Pumps Vickers VTM-42 Series Vane Pumps To 7.5 @ 500 Vickers VTM-42 Power Steering Pumps Integral Control and Relief Valves Features: Integral flow control and relief valves eliminate the need for separate valves. Balanced vane design eliminates pressure-induced bearing loads to provide longer life. Vanes automatically compensate for any vane tip wear, providing like-new pump performance for the duration of the pump's life. Maximum Pressure:. Maximum Speed @ 00 PSI: 7000 (0.2in³/rev-0.79in³/rev), 6000 (0.96in³/rev), 5000 (.8in³/rev). Maximum Speed @ 500 PSI: 5000 (0.2in³/rev), 4500 (0.3in³/rev), 4200 (0.38in³/rev), 2800 (0.79in³/rev), 2600 (0.96in³/rev), 2500 (.8in³/rev). Maximum Speed @ : 4250 (0.2in³/rev), 4000 (0.3in³/rev), 3800 (0.38in³/rev), 2800 (0.79in³/rev), 2300 (0.96in³/rev), 2000 (.8in³/rev). Miscellaneous Products Indexes & Technical Information Fluid Conveying Vickers VTM-42 Power Steering Pumps Integral Control and Relief Valves Vickers CBM78 385998-R Vickers Model VTM42-60-75-5-NO-R-4 Mounting Flange Shaft Displ 4.875 B.C. /2-20 UNF-2A Thd with Woodruff Key Ring Size 200.8 6 Rate & Relief Setting (At 500 & 00 PSI) Other Features 7.5 500 PSI No reservoir, No manifold, Rotation.62 77

and Pumps Doering Series 24 Cartridge and Pumps Cavity Required: C-0-2. Installation: Lubricate seals, using -/4 wrench torque to approximately 50 foot pounds. Socket may be rotated 360 for handle positioning. Doering Series 24 Cartridge and Pumps Doering Model Description CEN2 2406 6 inch andle for 24 Series Pumps. 2.50 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 78

ydraulic Power & Control Pneumatic Power & Control and Pumps Integrated ydraulics P Series Cartridge and Pump Features: Built in pressure and suction checks. Self contained cartridge element. Low leakage ball and seat design. Minimal effort required for plunger movement. Requires a machined C-0-2 cavity or housing for installation. Application: The P7 hand pump has been designed to be used on machines which require emergency release of brakes or for pilot supply for emergency lowering of access platforms. It can also be utilised in the lubrication circuits. Operation: Depressing the plunger will force oil out through a check valve and into the system. The plunger will then retract drawing oil into the chamber through a second check valve. Specifications: 0.08 cubic inch displacement. 725 psi maximum generated pressure. -22 to +94 F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 04 F and 50 SSU. Recommended Filtration Level: ISO level 8/3 or better. Installation: 30 ft-lbs torque cartridge into cavity. For compatible C-0-2 bodies see page 40 Fluid Conveying Miscellaneous Products Integrated ydraulics Part No. Integrated ydraulics P Series Cartridge and Pump Integrated ydraulics Model Body Seal Material CKA 40AA00034A P7-S None Nitrile 0.35 Indexes & Technical Information 79

Air-Operated Diaphragm Pumps Air-Operated Diaphragm Pumps Aro Air-Operated Diaphragm pumps offer several performance advantages over other pump types in fluid transfer applications. () When you close the fluid outlet, the pump stops. No movement, no wear, no overload, no heat buildup, no power consumption. (2) Variable flow rates are achieved by simply adjusting air pressure to the pump or by restricting the discharge line. (3) Positive priming provides easy start-ups. Internal fluid check valves are located close to the diaphragm chambers, assuring positive self-priming, even from a dry start. (4) Pumping efficiency remains constant since there are no rotors, gears, vanes or pistons to wear out. (5) Runs dry without damage. (6) No foaming or shearing of material. Process fluids enter and exit unchanged. (7) No lubrication is required so there is less maintenance. (8) Pumps are lightweight and portable and can be carried from job to job with ease. Features: Patented "Unbalanced" air valve design ensures pump will always resume pumping action when called on. Bolted construction for an improved seal and safer fluid handling. No rotating or sliding seals to leak or fail. Dimensions & Performance Curves: page 566 /4 Inch Ports 4.6 Capability Non-Metallic Wetted Parts Maximum Rate: 4.6. Displacement: 0.04 Gallons per Cycle. Maximum Operating Pressure: 00 PSI. Suspended Solids Capability: Clean fluids only. Maximum Dry Suction Lift: 20 ft. Fluid Ports: 3/8 NPT. /4 NPT. Air : /4 NPT. Recommended Filter/Regulator: page 758 /4 Inch Ports 4.6 Capability Non-Metallic Wetted Parts Aro Model Center Section Port Wetted End Seat Material Disk Check / Diaphragm CDG80 PD02P-APS-PTA Polypropylene Single In/Out Polypropylene Polypropylene Teflon /Santoprene 4.70 CDG8 PD02P-APS-PTT Polypropylene Single In/Out Polypropylene Polypropylene Teflon /Teflon 2.50 /2 Inch Ports 3 Capability Non-Metallic Wetted Parts Maximum Rate: 3. Displacement: 0.04 Gallons per Cycle. Maximum Operating Pressure: 00 PSI. Suspended Solids Capability: 3/32 inch diameter. Maximum Dry Suction Lift: 0 ft. (Teflon fitted). Fluid Ports: /2 NPT. /2 NPT. Air : /4 NPT. Recommended Filter/Regulator: page 758 /2 Inch Ports 3 Capability Non-Metallic Wetted Parts Aro Model Air Motor Wetted Parts Check Valve Seats CBX83 66605J-3 Polypropylene Polypropylene Polypropylene Ball Check / Diaphragm Other Features Neoprene / Neoprene Single Piece Manifold 9.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 80

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Air-Operated Diaphragm Pumps /2 Inch Ports 3 Capability Non-Metallic Wetted Parts Aro Model Air Motor Wetted Parts CBX79 666053-322 Polypropylene Polypropylene Polypropylene Nitrile / Nitrile 9.24 Service Kits & Parts for Aro /2 Inch Diaphragm Pumps Part Number Description CBW98 6374 Service Kit, Air Motor 0.8 CBW94 63740- Service Kit, Diaphragm Material, Neoprene 0.32 Inch Ports 35 Capability Metallic Wetted Parts Maximum Rate: 35. Displacement: 0.6 Gallons per Cycle. Maximum Operating Pressure: 20 PSI. Suspended Solids Capability: /8 inch diameter. Maximum Dry Suction Lift: 20 ft. (Rubber fitted). Fluid Ports: inch NPT. inch NPT. Air : /4 NPT. Recommended Filter/Regulator: page 758 Inch Ports 35 Capability Metallic Wetted Parts Aro Model Air Motor Wetted Parts Check Valve Seats Check Valve Seats Ball Check / Diaphragm Other Features Ball Check / Diaphragm Other Features CBX87 66600-362-C Aluminum Aluminum Polypropylene Acetal / Buna-N 20.8 Service Kits & Parts for Aro inch Metallic Diaphragm Pumps Part Number Description CCB70 90532-6 Ball, Acetal 0.0 CCB72 90533-2 Diaphragm, Buna-N 0.50 CDT74 Y325-26 O-Ring, Nitrile, 3/32 x -9/6 OD 0.0 CBW93 6379-62-C Service Kit, Diaphragm Material, Buna-N 0.93 8

Centrifugal Pumps Centrifugal Pumps for Agricultural Spraying ypro centrifugal pumps are ruggedly built for reliability in higher capacity spraying systems. They handle a broad spectrum of spraying solutions from liquid fertilizers to ag chemicals to wettable powders. ousings are available in cast iron and polypropylene (Polypropylene pumps are light weight and provide maximum resistance to corrosive chemicals and acid fertilizers). Impellers are balanced for smooth operation and are precision molded of tough plastic for excellent corrosion resistance. ypro 9300C Series ydraulic Motor Driven Centrifugal Pumps To 4 / 80 PSI Ratings: 82-90 Max., 30-80 PSI Max. Pressure, 40 F Max. Fluid Temperature. Features: ydraulic motor drive (for open and closed center systems). 9302 Model Ports: -/4 NPT, NPT. 9303C Model Ports: -/2 NPT inlet, -/4 NPT outlet. 9304C Model Ports: 2 NPT inlet, -/2 NPT outlet. ydraulic Motor Ports: /2 NPT Cast iron pump housing. Viton /Ceramic pump shaft seals standard (Buna-N/Ceramic and Viton /Silicon Carbide available). Double lip Teflon hydraulic motor shaft seal. ypro 9300C Series ydraulic Motor Driven Centrifugal Pumps To 4 / 80 PSI ypro Model ydraulic System Type CJN 9302ST-GM Stainless Pump Casing, Polypropylene Impeller Open & Closed Center ydraulic Motor Capacity 3 Seals Life Guard Silicon Carbide Performance At ydraulic Motor Capacity 00 0PSI 85 20PSI 67 30PSI 48 40PSI 22 50PSI 55 60PSI 6 70PSI 48 80PSI 33 90PSI 20 00PSI 26.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 82

ydraulic Power & Control Pneumatic Power & Control Centrifugal Pumps ypro 9300C Series ydraulic Motor Driven Centrifugal Pumps To 4 / 80 PSI ypro Model ydraulic System Type ydraulic Motor Capacity Seals CCC54 9303C-M4C Open & Closed Center 7 Viton /Ceramic CZT55 9303C-MC Open & Closed Center 3 Viton /Ceramic Performance At ydraulic Motor Capacity 0 0PSI 97 20PSI 92 30PSI 86 40PSI 77 50PSI 64 60PSI 48 70PSI 38 80PSI 4 90PSI 23 0PSI 0 20PSI 09 30PSI 07 40PSI 05 50PSI 04 60PSI 02 70PSI 96 80PSI 85 90PSI 76 00PSI 63 0PSI 33 20PSI 3 30PSI 20.00 26.0 Indexes & Technical Information Miscellaneous Products Fluid Conveying 83

Pump Accessories Foot Brackets Vickers Foot Brackets (Cast Iron) Features: Can be used to mount pumps or motors having standard SAE-J 744 mounting flanges. Either pair of diametrically opposed holes may be used. Bolts are included. Material: Cast Iron. Vickers Foot Brackets (Cast Iron) Vickers Vickers Model Size Dimensions (inches) CBP87 A=5.3 B=2.75 C=6.00 D=3.00 E=5.00 F=.44 G=2.50 =.50 J=4.9 K=3.78 422582 FB-A-0 SAE A L=.59 M=2.00 N=.50 P=3.253 Q=.69 R=3/8-6 S=.44 4.20 CBP88 A=7.2 B=3.63 C=6.75 D=3.38 E=5.75 F=.44 G=2.88 =.50 J=5.75 K=3.77 422583 FB-B-0 SAE B L=.59 M=2.00 N=.50 P=4.003 Q=.68 R=/2-3 S=.68 5.94 CBP89 A=8.50 B=4.3 C=0.44 D=5.22 E=9.25 F=2.00 G=4.63 =.62 J=7.3 K=5.8 422584 FB-C-0 SAE C L=.75 M=3.00 N=.68 P=5.003 Q=.75 R=5/8- S=.68 2.2 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 84

ydraulic Power & Control Water Pump Accessories Foot Valves, Strainers, Skimmers Foot Valves, Strainers and Skimmers Pneumatic Power & Control Model Type Foot Valves, Strainers and Skimmers Size (in) Description Mfg. Name CFJ25 DFVS35 Foot Valve 3 Threaded Type, Painted Dixon 8.08 CGA20 RS200 Round ole Strainer 2 Zinc Plated Steel, Straight Pipe Threads (NPSM) Kuriyama.78 CDK RS-35 Round ole Strainer 3 Zinc Plated Steel, Pipe Threads (NPT) Dixon 2.00 CGA22 RS300 Round ole Strainer 3 Zinc Plated Steel, Straight Pipe Threads (NPSM) Kuriyama 3.08 CGA23 RS400 Round ole Strainer 4 Zinc Plated Steel, Straight Pipe Threads (NPSM) Kuriyama 2.90 CGA24 RS600 Round ole Strainer 6 Zinc Plated Steel, Straight Pipe Threads (NPSM) Kuriyama 6.04 Indexes & Technical Information Miscellaneous Products Fluid Conveying 85

ydraulic Motors & Accessories Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Category Geroter Motors Charynn Series (Up to 4600 lb-in torque. Up to 00.)................................ 87 Geroler Motors Charynn J Series (Up to 743 lb-in torque. Up to 2458.).................................. 89 Charynn S Series (Up to 590 lb-in torque. Up to 963.)................................. 90 Charynn 2000 Series (Up to 8225 lb-in torque. Up to 042.).............................. 93 Charynn 4000 Series (Up to 0450 lb-in torque. Up to 868.).............................. 96 Charynn 6000 Series (Up to 6580 lb-in torque. Up to 866.).............................. 97 Charynn 0,000 Series (Up to 30460 lb-in torque. Up to 784.)............................ 98 Gear Motors Cross Manufacturing 40 Series............................................................ 99 ydreco 500K Series................................................................... 200 ydreco 500M Series................................................................... 20 Permco Box Motors..................................................................... 202 Miscellaneous Gear Motors............................................................... 203 Vane Motors Vickers 25M through 50M Series (Up to 7500 lb-in torque. Up to 4000.)...................... 204 Piston Motors Eaton Medium Duty..................................................................... 205 ydraulic Motor Accessories Overhung Load Adaptors................................................................. 206 ydraulic Motor Technical Information & Dimensions Charynn Series.................................................................... 569 Charynn J Series.................................................................... 570 Charynn S Series.................................................................... 57 Charynn 2000 Series................................................................. 575 Charynn 4000 Series................................................................. 580 Charynn 6000 Series................................................................. 583 Charynn 0,000 Series................................................................ 586 Cross 40 Series........................................................................ 590 ydreco 500K Series.................................................................. 59 ydreco 500M Series.................................................................. 593 Eaton Medium Duty Piston Motors.......................................................... 595 Permco Box Motors..................................................................... 596 Vickers 25M-50M Series................................................................ 597 Vickers M2U Series.................................................................... 604 Page Indexes & Technical Information 86

ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn Series Geroter Motors Up to 4600 lb-in Intermittent Torque, 00 Intermittent Charynn Series motors are economical, efficient, compact and powerful, and are designed for medium duty applications. These motors have the industry proven spool valve design combined with state-of-the-art gerotors. In addition, a wide variety of mounting flanges, shafts, ports and a low speed valving option provides design flexibility. Direction of shaft rotation and shaft speed can be controlled easily and smoothly throughout the speed range of the motor. Equipment can be driven direct eliminating costly mechanical components. Maximum Case Pressure: 500 PSI. Fluid Viscosity: Minimum viscosity (at operating temperature) should be the highest of the following: 00SUS or (20 x PSI)/ = SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Manifold Ported Motors: Base Block Mounting Kits page 92 Dimensions & Technical Information: page 569 Charynn Series Geroter Motors Up to 4600 lb-in Intermittent Torque, 00 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CJW2 0-700 2.2 2 Bolt in. Straight 7/8-4 St.Thd O-Ring.70 CFE49 0-704 2.2 2 Bolt in. Straight /2 NPT.63 CLW53 0-749 2.2 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CFE53 0-753 2.2 4 Bolt in. Straight /2 NPT 0.9 CAG38 0-033 2.8 2 Bolt in. Straight 7/8-4 St.Thd O-Ring.75 CAG30 0-025 2.8 2 Bolt in. Straight /2 NPT.75 CKY88 0-009 2.8 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CAG2 0-00 2.8 4 Bolt in. Straight /2 NPT.25 CFE50 0-705 3.6 2 Bolt in. Straight /2 NPT 5.00 CFE54 0-754 3.6 4 Bolt in. Straight /2 NPT.20 CLW54 0-750 3.6 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CJW4 0-034 4.5 2 Bolt in. Straight 7/8-4 St.Thd O-Ring 2.0 CAG3 0-026 4.5 2 Bolt in. Straight /2 NPT 2.25 CKY89 0-00 4.5 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CAG22 0-002 4.5 4 Bolt in. Straight /2 NPT.50 CJW5 0-035 5.9 2 Bolt in. Straight 7/8-4 St.Thd O-Ring 2.34 CAG32 0-027 5.9 2 Bolt in. Straight /2 NPT 2.00 CJW 0-0 5.9 4 Bolt in. Straight 7/8-4 St.Thd O-Ring.50 CAG23 0-003 5.9 4 Bolt in. Straight /2 NPT 2.00 CLW52 0-702 7.3 2 Bolt in. Straight 7/8-4 St.Thd O-Ring CFE5 0-706 7.3 2 Bolt in. Straight /2 NPT 2.53 CFE55 0-755 7.3 4 Bolt in. Straight /2 NPT CLW55 0-75 7.3 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CFE52 0-707 8.9 2 Bolt in. Straight /2 NPT 2.8 CFE56 0-756 8.9 4 Bolt in. Straight /2 NPT CGG40 0-752 8.9 4 Bolt in. Straight 7/8-4 St.Thd O-Ring ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 87

ydraulic Motors & Accessories ydraulic Power & Control Pneumatic Power & Control Charynn Low-Speed igh-torque Motors Charynn Series Geroter Motors Up to 4600 lb-in Intermittent Torque, 00 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CAG33 0-028 9.7 2 Bolt in. Straight /2 NPT 3.25 CKY90 0-02 9.7 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CAG24 0-004 9.7 4 Bolt in. Straight /2 NPT 2.50 CAG34 0-029.3 2 Bolt in. Straight /2 NPT 3.50 CKY9 0-03.3 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CAG25 0-005.3 4 Bolt in. Straight /2 NPT 2.50 CAG35 0-030 4. 2 Bolt in. Straight /2 NPT 4.00 CKY92 0-04 4. 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CAG26 0-006 4. 4 Bolt in. Straight /2 NPT 3.00 CAG39 0-039 7.9 2 Bolt in. Straight 7/8-4 St.Thd O-Ring 0.00 CAG36 0-03 7.9 2 Bolt in. Straight /2 NPT 4.42 CKY93 0-05 7.9 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CAG27 0-007 7.9 4 Bolt in. Straight /2 NPT 3.80 CAG40 0-040 22.6 2 Bolt in. Straight 7/8-4 St.Thd O-Ring 5.25 CAG37 0-032 22.6 2 Bolt in. Straight /2 NPT 5.50 CKY94 0-06 22.6 4 Bolt in. Straight 7/8-4 St.Thd O-Ring CAG28 0-008 22.6 4 Bolt in. Straight /2 NPT 4.50 Fluid Conveying Miscellaneous Products Indexes & Technical Information Parts For Charynn Series Geroter Motors Part Number Description CAB 0022002-000 Backup Ring, Series -008-009 0.0 CAA62 00092-002 Dust Seal, Series -007-008 -009 0.02 CAA60 000909-00 Flange Seal, Series -005-007 -008-009 0.0 CAA98 0022000-00 Front Flange,, -008-009 Series.83 CAA98 0022000-00 Front Flange,, Series -008-009.83 CAA27 0007464-000 Front Flange, 4-Bolt, Series -007.0 CAA27 0007464-000 Front Flange, 4-Bolt, -007 Series.0 CAA99 0022000-002 Front Flange, 4-Bolt, -008-009 Series.08 CAA99 0022000-002 Front Flange, 4-Bolt, Series -008-009.08 CAB40 0060036-000 Seal Kit, Buna-N, -005 Series 0.04 CAB38 0060023-000 Seal Kit, Buna-N, -007 Series 0.05 CAB43 0060540-000 Seal Kit, Buna-N, -008-009 Series 0.05 CAA2 0007360-00 Shaft, Inch Straight with Woodruff key slot, Series -007-008 -009.52 CAA22 0007360-002 Shaft, SAE 6B, Series -007-008 -009.49 CAA53 0009057-00 Shaft Seal, Series -007 0.0 CAA56 0009057-04 Shaft Seal, Series -008-009 0.0 CAA72 006292-088 Torx ead Capscrew, Series -007-008 -009 0.03 CAA66 00493-000 Woodruff Key, Series -005-007 -008-009 0.02 88

ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn J Series Geroler Motors Up to 743 lb-in Intermittent Torque, 2458 Intermittent Charynn J Series motors pack a lot of power in a very small package. These motors feature a Geroler design, spool valving, high radial shaft load capability and case drain port. Maximum Case Pressure: 00 PSI (Without case drain). For continuous back pressure over 00 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: 00-200 SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 570 Seal Kit: Part number: 60580 Charynn J Series Geroler Motors Up to 743 lb-in Intermittent Torque, 2458 Intermittent Charynn Model Displ. (cu.in./rev) CAJ7 29-008 0.79 CJX28 29-009.2 CAJ70 29-0004.93 CJX29 29-0020.93 Mounting Flange Shaft Ports 5 Bolt /4-28UNF 5 Bolt /4-28UNF 5 Bolt /4-28UNF 5 Bolt /4-28UNF 5/8 in. Straight 5/8 in. Straight 5/8 in. Straight 5/8 in. Straight 9/6-8 St.Thd. O-Ring Side Ports 9/6-8 St.Thd. O-Ring Side Ports 9/6-8 St.Thd. O-Ring End Ports 9/6-8 St.Thd. O-Ring Side Ports Special Features Case Drain 3/8-24 St.Thd., Low Gloss Black Paint Case Drain 3/8-24 St.Thd., Low Gloss Black Paint Case Drain 3/8-24 St.Thd. Case Drain 3/8-24 St.Thd., Low Gloss Black Paint 4.76 4.80 5.5 5.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 89

ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Charynn Low-Speed igh-torque Motors Charynn S Series Geroler Motors Up to 590 lb-in Intermittent Torque, 963 Intermittent Charynn S Series motors with Geroler offer the same advantage of low speed, high torque and compact size as the Series with geroter. In the Geroler, element precision machined rollers form the displacement chambers. The rollers provide support with rolling contact as the star rotates, minimizing friction and providing high efficiency, especially at start-up and at low speeds. Maximum Case Pressure: 500 PSI. Fluid Viscosity: 70 SUS at operating temperature. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Manifold Ported Motors: Base Block Mounting Kits page 92 Dimensions & Technical Information: page 57 Charynn S Series Geroler Motors Up to 590 lb-in Intermittent Torque, 963 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CJW30 03-537 3.6 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring 4.80 CFE57 03-540 3.6 2 Bolt in. Straight /2 NPT 5.27 CFE60 03-573 3.6 4 Bolt in. Straight /2 NPT 4.63 CLW60 03-570 3.6 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring CLW57 03-034 4.6 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG78 03-026 4.6 2 Bolt in. Straight /2 NPT 5.50 CAG74 03-00 4.6 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring 4.84 CAG67 03-002 4.6 4 Bolt in. Straight /2 NPT 5.00 CF58 03-035 5.7 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring 5.67 CAG79 03-027 5.7 2 Bolt in. Straight /2 NPT 6.00 CKX62 03-0 5.7 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring 4.62 CAG68 03-003 5.7 4 Bolt in. Straight /2 NPT 5.50 CFE58 03-54 7.3 2 Bolt in. Straight /2 NPT 5.87 CC88 03-538 7.3 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring 6.05 CBN40 03-574 7.3 4 Bolt in. Straight /2 NPT 5.46 CLW6 03-57 7.3 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring CFE59 03-542 8.8 2 Bolt in. Straight /2 NPT CFE6 03-575 8.8 4 Bolt in. Straight /2 NPT 5.97 CLW62 03-572 8.8 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring CLW59 03-539 8.8 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring CZZ49 03-036 0. 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring 7.02 CAG80 03-028 0. 2 Bolt in. Straight /2 NPT 7.25 CAG75 03-02 0. 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring 2.00 CAG69 03-004 0. 4 Bolt in. Straight /2 NPT 6.50 CLW58 03-037.4 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG8 03-029.4 2 Bolt in. Straight /2 NPT 7.55 CKZ4 03-03.4 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG70 03-005.4 4 Bolt in. Straight /2 NPT 7.00 90

ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn S Series Geroler Motors Up to 590 lb-in Intermittent Torque, 963 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports CAG88 03-2038 3.7 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring 8.75 CAG85 03-038 3.7 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring 20.00 CAG82 03-030 3.7 2 Bolt in. Straight /2 NPT 8.50 CAG76 03-04 3.7 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring 6.00 CAG7 03-006 3.7 4 Bolt in. Straight /2 NPT 7.75 CEL53 03-039 7.9 2 Bolt in. Straight 7/8-4 St.Thd O-Ring 20.25 CAG83 03-03 8.2 2 Bolt in. Straight /2 NPT 20.25 CKZ5 03-05 8.2 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring Special Features CAG72 03-007 8.2 4 Bolt in. Straight /2 NPT 8.75 CAG86 03-040 22.7 2 Bolt in. Straight 7/8-4 St.Thd. O-Ring 20.70 CAG84 03-032 22.7 2 Bolt in. Straight /2 NPT 20.75 CJC4 03-024 22.7 4 Bolt in. Straight Manifold 20.0 CAG77 03-06 22.7 4 Bolt in. Straight 7/8-4 St.Thd. O-Ring 20.00 CAG73 03-008 22.7 4 Bolt in. Straight /2 NPT 20.00 Parts For Charynn S Series Geroler Motors Part Number Description CAB 0022002-000 Backup Ring, S Series -009-00 0.0 CAA62 00092-002 Dust Seal, S Series -008-009 -00 0.02 CAA60 000909-00 Flange Seal, S Series -006-007 -008-009 -00 0.0 CAA98 0022000-00 Front Flange,, -009-00 Series.83 CAA98 0022000-00 Front Flange,, S Series -009-00.83 CAA27 0007464-000 Front Flange, 4-Bolt, -007-008 Series.0 CAA27 0007464-000 Front Flange, 4-Bolt, S Series -007-008.0 CAA99 0022000-002 Front Flange, 4-Bolt, -009-00 Series.08 CAA99 0022000-002 Front Flange, 4-Bolt, S Series -009-00.08 CAB39 0060026-000 Seal Kit, Buna-N, -007 Series 0.05 CAB4 0060533-000 Seal Kit, Buna-N, -008 Series 0.05 CAB42 0060539-000 Seal Kit, Buna-N, -009-00 Series 0.05 CJC65 99000-000 Seal Kit, Buna-N, contains poppet, -02 Series 0.05 CAA2 0007360-00 Shaft, Inch Straight with Woodruff key slot, S Series -008-009 -00.52 CAA22 0007360-002 Shaft, SAE 6B, S Series -008-009 -00.49 CAA53 0009057-00 Shaft Seal, S Series -007-008 0.0 CAA56 0009057-04 Shaft Seal, S Series -009-00 0.0 CAA72 006292-088 Torx ead Capscrew, S Series -008-009 -00 0.03 CAA66 00493-000 Woodruff Key, S Series -006-007 -008-009 -00 0.02 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 9

ydraulic Motors & Accessories ydraulic Power & Control Charynn Low-Speed igh-torque Motors Charynn & S Series Base Block Mounting Kits Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control Charynn & S Series Base Block Mounting Kits Charynn Model Description CAJ48 23-007 7/8-4 St.Thd. O-Ring Ports 2.88 92

ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn 2000 Series Geroler Motors Up to 8225 lb-in Intermittent Torque, 042 Intermittent Charynn 2000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. eavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: (Without case drain). For continuous back pressure over, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: 00-200 SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 575 Charynn 2000 Series Geroler Motors Up to 8225 lb-in Intermittent Torque, 042 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CAG95 04-00 4.9 2 Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 23.03 CA2 04-022 4.9 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 23.00 CA9 04-029 4.9 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 25.00 CAG96 04-002 6.2 2 Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 23.35 CA3 04-023 6.2 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 23.59 CEV49 04-030 6.2 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 23.74 CLA9 04-337 6.2 4 Bolt Magneto SAE C 4T 7/8-4 St.Thd. O-Ring Black Paint CAG97 04-003 8.0 2 Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 24. CA4 04-024 8.0 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 24.25 CJW42 04-03 8.0 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 23.80 CJW54 04-386 8.0 4 Bolt 32mm Straight G /2 BSP 2.50 CJW39 04-004 9.6 2 Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 22.00 CA5 04-025 9.6 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 24.50 CJW47 04-064 9.6 2 Bolt SAE A -/4 in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart 22.00 CJB95 04-0 9.6 2 Bolt SAE A -/4 in. Tapered 7/8-4 St.Thd. O-Ring 2.68 CAG98 04-005.9 2 Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 25.00 CA6 04-026.9 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 25.25 CJW48 04-065.9 2 Bolt SAE A -/4 in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart 23.00 CJW43 04-033.9 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 23.00 CL55 06-02.9 Bearingless None 7/8-4 St.Thd. O-Ring 20.36 CJW40 04-006 4.9 2 Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 8.00 CA7 04-027 4.9 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 27.00 CA20 04-034 4.9 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 26.00 CJW53 04-98 4.9 2 Bolt SAE B SAE 6B 7/8-4 St.Thd. O-Ring 24.00 CA53 06-03 4.9 Bearingless None 7/8-4 St.Thd. O-Ring 20.56 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 93

ydraulic Motors & Accessories ydraulic Power & Control Pneumatic Power & Control Charynn Low-Speed igh-torque Motors Charynn 2000 Series Geroler Motors Up to 8225 lb-in Intermittent Torque, 042 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CAG99 04-007 8.7 2 Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 27.0 CA8 04-028 8.7 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 27.75 CA22 04-067 8.7 2 Bolt SAE A -/4 in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart 27.75 CA2 04-035 8.7 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 27.50 CK83 04-407 8.7 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 2000 psi cross-over relief CGJ55 06-04 8.7 Bearingless None 7/8-4 St.Thd. O-Ring 22.46 CLW63 04-43 24.0 2 Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring CJW45 04-044 24.0 2 Bolt SAE A in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart 26.00 CA23 04-228 24.0 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 29.75 CJW5 04-068 24.0 2 Bolt SAE A -/4 in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart 26.00 CA24 04-229 24.0 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 29.50 CA54 06-05 24.0 Bearingless None 7/8-4 St.Thd. O-Ring 24.23 CJC8 05-060 24.0 Wheel Motor -/4 in. Tapered 7/8-4 St.Thd. O-Ring 32.46 CA25 04-420 29.8 2 Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring 32.00 CA26 04-422 29.8 2 Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 30.00 39.00 Fluid Conveying Miscellaneous Products Indexes & Technical Information Parts For Charynn 2000 Series Geroler Motors Part Number Description CAA23 0007382-000 Backup Ring, 2000 Series -003-004 -005-006 0.0 CAA8 00237-008 Drive for 24 cu.in./rev, 2000 Series -003-004 -006 0.95 CAA82 00237-02 Drive for 29.8 cu.in./rev, 2000 Series -006.00 CAA6 00092-00 Dust Seal, 2000 Series -003-004 -005-006 0.05 CJM36 004392-006 Key for -/4 Tapered Shaft 0.03 CAA65 00463-000 Nut for -/4 Tapered Shaft 0.3 CAB50 006252-000 Seal Kit, Buna-N, Standard & Wheel Motors, -003-004-005 Series 0.07 CAB52 006259-000 Seal Kit, Buna-N, Bearingless Motors, -006 Series 0.04 CAB5 006258-000 Seal Kit, Buna-N, Standard & Wheel Motors, -006 Series 0.07 CJL43 006289-000 Seal Kit, Buna-N, Wheel Motors with Seal Guard, -006 Series 0.09 CAB53 006263-000 Seal Kit, Viton, Standard & Wheel Motors, -006 Series 0.07 CAA89 00268-00 Shaft & Bearing Kit, Inch Straight, 2000 Series -006 3.57 CJS7 00268-005 Shaft & Bearing Kit, inch 6B, -006 Series 3.50 CAA90 00268-002 Shaft & Bearing Kit, -/4 Inch Straight, 2000 Series -006 3.86 CAA92 00268-004 Shaft & Bearing Kit, 4 Tooth, 2000 Series -006 3.72 CAA9 00268-003 Shaft & Bearing Kit, -/4 Inch Tapered, 2000 Series -006 3.58 CAA54 0009057-009 Shaft Seal, 2000 Series -003-004 -005-006 0.02 CAB2 002202-000 Wear Plate, 2000 Series -006.80 94

ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn Delta Series Geroler Motors Up to 0,500 lb-in Intermittent Torque, 837 Intermittent The Delta motor provides torques up to 0,500 in-lbs. Eaton has packed this motor with many best in class features: the optimized geroler profile ensures smooth operation; the disc valve technology has the best performance and the bearing capacity is the highest in the industry for very demanding applications. Maximum Case Pressure: Fluid Viscosity: No less than 70 SUS at operating temperature. Recommended Fluids: Premium quality, anti wear type hydraulic oil. Recommended Filtration: Per ISO Cleanliness Code 20/8/3 Maximum Recommended Operating Temperature: 80 F Recommeded Break-In: Top assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: Charynn Delta Series Geroler Motors Up to 0,500 lb-in Intermittent Torque, 837 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CLB 84-06 8.3 Wheel -/2" Straight 7/8" O-Ring Black Paint CLW8 84-000 33. Wheel -/4" Tapered 7/8" O-Ring ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 95

ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Charynn Low-Speed igh-torque Motors Charynn 4000 Series Geroler Motors Up to 0450 lb-in Intermittent Torque, 868 Intermittent Charynn 4000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. eavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: 500 PSI (Without case drain). For continuous back pressure over 500 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: 00-200 SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 580 Charynn 4000 Series Geroler Motors Up to 0450 lb-in Intermittent Torque, 868 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CEX39 09-00 6.7 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CJW74 09-0 7.9 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring 37.20 CJW75 09-02 9.9 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring 38.0 CLW64 09-03 2.5 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CJL75 09-0 2.5 4 Bolt SAE B -5/8 in. Tapered -/6-2 St.Thd. O-Ring 4.0 CZV45 09-04 5.0 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring 38.34 CA64 09-05 9.0 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring 40.00 CA66 09-2 9.0 4 Bolt SAE B -5/8 in. Tapered -/6-2 St.Thd. O-Ring 43.00 CA65 09-06 24.0 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring 60.00 CLW65 09-22 30.0 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CJW8 09-25 38.0 4 Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring 47.00 Parts For Charynn 4000 Series Geroler Motors Part Number Description CAB46 006234-000 Seal Kit, Rear, Buna-N, Standard & Wheel Motors, -004-006 Series 0.04 CAB55 00628-000 Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, -004-006 Series 0.06 CAB47 006236-000 Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, -004 Series 0.05 CF88 002330-00 Shaft & Bearing Kit, -/4 Inch Straight, 4000 Series -006 5.9 CEZ85 002330-002 Shaft & Bearing Kit, -5/8 Inch Tapered, 4000 Series -006 5.82 96

ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn 6000 Series Geroler Motors Up to 6580 lb-in Intermittent Torque, 866 Intermittent Charynn 6000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. eavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: 000 PSI (Without case drain). For continuous back pressure over 000 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: 00-200 SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 583 Charynn 6000 Series Geroler Motors Up to 6580 lb-in Intermittent Torque, 866 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CJW9 2-064.9 4 Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring 58.20 CLW66 2-065 5.0 4 Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CA83 2-066 9.0 4 Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring 60.00 CA84 2-067 23.9 4 Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring 63.00 CA80 2-06 23.9 4 Bolt SAE C SAE CC 7T -5/6-2 St.Thd. O-Ring 95.00 CA85 2-068 30.0 4 Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring 65.00 CA8 2-062 30.0 4 Bolt SAE C SAE CC 7T -5/6-2 St.Thd. O-Ring 59.50 CJW96 3-074 30.0 Wheel Motor -3/4 in. Tapered -5/6-2 St.Thd. O-Ring 37.00 CEV52 2-07 38.0 4 Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring 67.85 CLW67 2-45 45.0 4 Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CA86 2-069 60.0 4 Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring 65.00 CA82 2-063 60.0 4 Bolt SAE C SAE CC 7T -5/6-2 St.Thd. O-Ring 76.00 Parts For Charynn 6000 Series Geroler Motors Part Number Description CFV49 004394-007 Key for Tapered Shaft Models 0.07 CFV49 004394-007 Key for Tapered Shaft, 6000 Series 0.07 CAB49 006238-000 Seal Kit, Rear, Buna-N, Standard & Wheel Motors, -005 Series 0.05 CAB48 006237-000 Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, -005 Series 0.07 CK37 020837-00 Shaft and Bearing Kit (-/2 inch Straight), 6000 Series 7.30 CFW9 020837-002 Shaft & Bearing Kit, -3/4 Inch Tapered, 6000 Series -006 7.75 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 97

ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Charynn Low-Speed igh-torque Motors Charynn 0,000 Series Geroler Motors Up to 30460 lb-in Intermittent Torque, 784 Intermittent Charynn 0,000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. eavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: 300 PSI (Without case drain). For continuous back pressure over 300 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: 00-200 SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 586 Charynn 0,000 Series Geroler Motors Up to 30460 lb-in Intermittent Torque, 784 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CAJ24 9-028 2.0 4 Bolt SAE C 2-/4 in. Straight -5/6-2 St.Thd. O-Ring 96.00 CLW68 9-040 2.0 4 Bolt SAE C 2-/4 in. Straight -/4 Code 6 Split Flange CAJ25 9-029 29.3 4 Bolt SAE C 2-/4 in. Straight -5/6-2 St.Thd. O-Ring 50.00 CAJ26 9-030 40.6 4 Bolt SAE C 2-/4 in. Straight -5/6-2 St.Thd. O-Ring 0.00 CJX8 9-042 40.6 4 Bolt SAE C 2-/4 in. Straight -/4 Code 6 Split Flange 45.00 CJX24 2-03 40.6 Bearingless None -/4 Code 6 Split Flange 73.00 CAJ27 9-03 57.4 4 Bolt SAE C 2-/4 in. Straight -5/6-2 St.Thd. O-Ring 06.00 CLW69 9-043 57.4 4 Bolt SAE C 2-/4 in. Straight -/4 Code 6 Split Flange Parts For Charynn 0,000 Series Geroler Motors Part Number Description CY24 0009002-004 Front Thrust Bearing, 0,000 Series -002-003 -004 0.05 CEZ84 0008573-004 Geroler, 57.3 cu.in./rev, 0,000 Series -002-003 -004 7.6 CAA8 0006406-000 Seal Kit, Shaft, Buna-N, -002-003-004 Series 0.07 CAA7 0006405-000 Seal Kit, Motor, Buna-N, -002-003-004 Series 0.06 CZZ94 0008484-000 Shaft, 2-/4 Straight, 0,000 Series -002-003 -004.36 CY23 000900-004 Thrust Washer, 0,000 Series -002-003 -004 0.0 CY2 000900-002 Rear Thrust Washer, 0,000 Series -002-003 -004 0.07 CY22 000900-003 Thrust Washer (Thin), 0,000 Series -002-003 -004 0.03 CZZ93 0008958-000 Wear Plate, 0,000 Series -002-003 -004 8.46 98

ydraulic Motors & Accessories Gear Motors Cross 40 Series Gear Motors Internal Check Valves for Bi-Rotational Capability Features: Improved gear tooth design and pressure-balanced loading plates provide for a high volumetric and overall efficiency, while operating at a low noise level. Bi-directional design using internal check valves. Die-cast aluminum alloy body and end covers. Sintered metal gears. ardened steel shaft. Pressure lubricated, Teflon impregnated sleeve bearings, Buna-N seals. Application: Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: : Rated Working Pressure, 3500 PSI Maximum Shock Pressure. : Pressures over 250 PSI require a case drain line be installed. Rated Speeds: Up to 3000. Note: Ratings based on using anti wear hydraulic fluid. Dimensions: page 590 Foot Brackets: page 84 CBN94 CKK3 CBN95 CEN35 CEN36 CJD42 360036 Cross 40 Series Gear Motors Internal Check Valves for Bi-Rotational Capability Cross Model 40M05DACSC 40M05DAKSC 40M07DACSC 40M0DACSC 40M2DACSC Displacement PressureRating Max Speed 0.50 in³/rev 3000 0.5 in³/rev 3000 0.75 in³/rev 3000.00 in³/rev 3000.25 in³/rev 3000.80 in³/rev 3000 Mtg Flange Shaft Ports Other Features SAE A SAE A SAE A SAE A SAE A SAE A 5/8 St. x.25 Long 3/4 St. X 2.3 Long 5/8 St. x.25 Long 5/8 St. x.25 Long 5/8 St. x.25 Long 5/8 St. x.25 Long SAE-2 Side Ports Bi-Rotational 3.08 SAE-2 Side Port Bi-Rotational 6.75 SAE-2 Side Ports Bi-Rotational 6.85 SAE-2 Side Ports Bi-Rotational 6.00 SAE-2 Side Ports Bi-Rotational 8.00 SAE-2 Side Ports Bi-Rotational 8.36 Parts For Cross 40 Series Motors Part Number Description CBW20 5A008 Shaft Seal, igh Pressure (250 PSI) 0.04 CZ92 4P002-026 Shaft only (no gear),, for.00 in³/rev model 0.72 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 99

ydraulic Motors & Accessories Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Gear Motors ydreco 500K Series Gear Motors Internal Check Valves for Bi-Rotational Capability Features: eavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the output shaft. Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: : (Varies with displacement. See table below). : Pressures over 50 psi require a case drain line be installed (Bi-Directional applications require a motor with Bi-Rotational feature, and a case drain line be installed). Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 80 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 0 Micron Absolute for maximum motor life. Dimensions & Technical Information: page 59 Foot Brackets: page 84 CAK92 ydreco 500K Series Gear Motors Internal Check Valves for Bi-Rotational Capability ydreco Model 55KC3AAB Displacement PressureRating Max Speed.77 in³/rev 3600 Note: Minimum speed under load is 600. Mtg Flange Shaft Ports Other Features SAE A 5/8 St. x 2.25 Long 3/4 NPT Side & Rear (Side Ports Plugged) Bi-Rotational, Shielded Outboard Bearing 8.65 Indexes & Technical Information 200

ydraulic Motors & Accessories Gear Motors ydreco 500M Series Gear Motors Mechanical Face Seal for Bi-Rotational Capability Features: eavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. All models have mechanical face seal which allows for high back pressures with no case drain. Pressure Limits:. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 80 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 0 Micron Absolute for maximum motor life. Dimensions & Technical Information: page 593 Foot Brackets: page 84 CAK78 CAK83 CAK88 CAK89 ydreco 500M Series Gear Motors Mechanical Face Seal for Bi-Rotational Capability ydreco Model 506MC3EBB 50MC3EBB 52MC3EBB 52MC3GBB Displacement PressureRating Max Speed 0.738 in³/rev 3600.80 in³/rev 3600.467 in³/rev 3600.467 in³/rev 3600 Note: Minimum speed under load is 600. Mtg Flange Shaft Ports Other Features SAE A SAE A SAE A 4-Bolt Foot Mount 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 3/4 NPT Rear Ports 3/4 NPT Rear Ports 3/4 NPT Rear Ports 3/4 NPT Rear Ports Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Parts for ydreco 500M Series Motors Part Number Description CDK90 SKO362 Seal Kit for 500M Series Motors 0.7 7.07 6.79 7.00 20.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 20

ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Gear Motors Permco Box Motors Internal Check Valves for Bi-Rotational Capability Features: Motors are stocked with Permco's "Continental Shaft" (Shaft can be changed without motor disassembly by removing shaft retaining snap ring and pulling shaft and bearing out). This allows for an easy shaft change to satisfy various applications. Special iron alloy used for shaft covers, gear housings, bearing carriers and port end cover castings. Gears are cut to extremely close tolerances, and are shaped (rather than hobbing and shaving) for maximum volumetric efficiency. Application: All motors have both side and rear ports (The 2 unused ports need to be plugged). All motors are bi-rotational and may be used as bi-rotational pumps. All models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: :. : Pressures over 50 PSI require a case drain line be installed. Rated Speeds: 2000. Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 50 F. Never to exceed 85 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B0 rating of at least 2.2. Dimensions & Technical Information: page 596 Foot Brackets: page 84 CDG94 CDG95 CDG96 Permco Model PEK0C PEK5C PEK20C CDG97 PEL7C CDG98 PEL20C CDG99 PEL22C CD PEL25C Permco Box Motors Internal Check Valves for Bi-Rotational Capability Displacement PressureRating Max Speed 2.00 in³/rev 2000 3.00 in³/rev 2000 4.00 in³/rev 2000 4.50 in³/rev 2000 5.5 in³/rev 2000 5.79 in³/rev 2000 6.40 in³/rev 2000 Mtg Flange Shaft Ports Other Features 2/4 Bolt SAE B 2/4 Bolt SAE B 2/4 Bolt SAE B 4 Bolt SAE B 4 Bolt SAE B 4 Bolt SAE B 4 Bolt SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B NPT Side and Rear NPT Side and Rear -/4 NPT Side, NPT Rear -/4 NPT Side and Rear -/4 NPT Side and Rear -/4 NPT Side and Rear -/2 NPT Side, -/4 NPT Rear Bi-Rotational, Case Drain 32.95 Bi-Rotational, Case Drain 36.00 Bi-Rotational, Case Drain 38.65 Bi-Rotational, Case Drain 47.00 Bi-Rotational, Case Drain 47.00 Bi-Rotational, Case Drain 49.52 Bi-Rotational, Case Drain 47.00 202

ydraulic Motors & Accessories Gear Motors Miscellaneous Gear Motors CDD58 Mfg. M3000C783LDZA05- (M3000C783LDZA05-24) Contact us for more information. Miscellaneous Gear Motors Mfg Name Displ (in³/rev) Mount Shaft Ports Rot. Permco.00 SAE A 3/4 Straight 3/4 NPT Rear Other Features Bi-Rot 25.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 203

ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Vickers 35M Series Vane Motors Up to 2875 lb-in Intermittent Torque Up to 4000 Intermittent Vickers 35M Series Vane Motors Unless noted otherwise, all motors have: SAE C Mounting Flange. -/2" SAE 4-Bolt Flange Ports. 3/8 NPT Drain Port (in rear cover). Application Information: page 597 Specifications: page 598 Model Codes: page 599 Dimensions: page 60 Replacement Parts: page 204 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Maximum Continuous Speed & Pressure: 3600 @ 500 PSI, 2600 @ 2250 PSI. Maximum Intermittent Speed & Pressure: 4000 @ 500 PSI, 3000 @. Intermittent Ratings: (0% of total operating time; each application of pressure and/or speed not to exceed 6 seconds). Motors are stocked as shown in table. ANY cover position is available for same-day shipment. See Model Codes page to select a different model code. Vickers See Note Above Vickers Model See Note Above Vickers 35M Series Vane Motors Shaft Displ Cu.Inch Per Rev Ring Size CBL65 32065-3 35M5A-C20 -/4 Straight 7.44 5 5 CBL63 32062-3 35M5A-C20 4 Tooth SAE C 7.44 5 5 Vickers Part No. Vickers Model 32065-3 35M5A-C20 5 92367 32062-3 35M5A-C20 5 92367 Torque Per 00 PSI (lb-in) Cover Position Port Connections In-line (C) 64.00 Port Connections In-line (C) 64.00 Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit 30872 -/4"-Straight- 27596 394973 92363 30873 4Tooth-SAE-C- -- 394973 92363 Vickers 35M Vane Motors Replacement Parts List Part Number Description CCC29 92367 Cartridge Kit, Ring Size 5 7.00 CCC26 92363 Seal Kit, Buna-N 0.0 CBL60 30872 # Shaft, -/4" Straight 2.04 CBC42 27596 Shaft Key, 5/6 x -/8 0.03 CBN9 394973 Shaft Seal, Buna-N 0.07 204

ydraulic Motors & Accessories Eaton Piston Motors Eaton Medium Duty Piston Motors Features: Compact Lightweight Durable ousing Numerous Shaft Options SAE Mounting Flanges SAE O-Ring Porting Dual Rotation Various Porting Options Fixed Displacements Pressure Limits: Main Ports: Varies with displacement, see table below. Case: 25 PSI limit for 0.60 thru 2.48 cu.in./rev models, 00 PSI limit for 5.04 cu.in./rev model. Rated Speed: Varies with displacement, see table below. Temperature: 225 F maximum continuous. Case Drain: CAUTION - Failure to meet these requirements may result in damage to the piston motor. Install piston motors in such a position that the case drain assures an oil level at or above unit center line. Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the motor must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Oil level must be at or above the unit center line before starting the piston motor. Provide a case drain line of adequate size to limit the case pressure to specified maximum. Fluid Recommendations: ISO 4406 Cleanliness Level 8/3 or cleaner. Recommended Filtration: 60-80 SSU Optimum, 60 SSU Minimum, 2000 SSU Maximum (cold start). Dimensions: page 595 CE22 CKD79 CKD8 CE23 Eaton Model 7435-DCU 7435-DA 7438-DBD 7438-DFW Displacement Max Speed 2.0 3600rpm 2.0 3600rpm 2.48 3600rpm 2.48 3600rpm Eaton Medium Duty Piston Motors Pressure Ratings Mounting Flange Shaft Ports Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent SAE B SAE B SAE B SAE B 3T SAE B 3T SAE B 5T SAE BB 3T SAE B Side Ports: SAE-6 Work, SAE-8 Case Drain Side Main Ports: SAE-2 Case Drains: SAE-8 Bottom, SAE-6 Upper Rear Same Side Main Ports: SAE-6 Top Case Drain: SAE-8 Side Ports: SAE-6 Work, SAE-8 Case Drain Other Features Plugged Speed Sensor Port, Polyacrylate Shaft Seal Shuttle Valve with 235 PSI LP Relief, M2x.5 Diagnostic Ports Parts for Eaton Medium Duty Piston Motors Part Number Description CKD34 70402-649 Rotating Kit Assembly, Model 7448 5.60 CKD43 70423-67 Rotating Kit Assembly, 2.77 in³, Model 70423 5.0 CKD85 7448-904 Seal Kit, Model 7448 0.05 20.00 22.00 24.0 20.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 205

ydraulic Motors & Accessories Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Overhung Load Adaptors ZERO-MAX / ELLAND Overhung Load Adaptors Features: Available in SAE flange sizes A, B, C, CC, D and sizes for Charynn & S Series motors with 4-bolt flange. ousings drilled & tapped for convenient foot mounting. A wide variety of custom input and output shafts are available on special order. Application: Used to protect motors, pumps and brakes from axial and radial stresses created by side loads. Also protects their shaft seals from invasive contaminants (a leading cause of motor failure). Materials: Bodies are made of 25,000 tensile strength cast iron. Shafts are made of 30,000 PSI stress proof steel. Bearing types vary by series. Mounting: orizontal mounting is standard. (Vertical mounting requires special attention to upper bearing lubrication. Contact us for application assistance). Lubrication: * ALL MODELS ARE SIPPED WITOUT LUBRICATION *. Product tables show the amount of lubricant needed for the recommended 2/3 cavity fill. Type of lubrication depends on. 800 and under: Bearing grease (high quality NLGI No. or No. 2), oil or force feed systems. 800 to 2500 : Low viscosity oil lubrication or force feed systems. Over 2500 : Force feed oil systems. Contact us for application assistance with oil or force feed systems. Calculating Overhung Load: Overhung Load (in pounds) = (63000 x P x F) / ( x RADIUS). P = orsepower. F =.00 for single chain drives,.0 for timing belt drives,.25 for double chain drives,.50 for v-belt drives, 2.50 for flat belt drives. RADIUS = Radius of sprocket or pulley in inches. Note: Doubling the Load reduces life to about one-tenth. Doubling the Speed reduces life by one-half. 4-Bolt for Charynn & S Series Motors Input Shafts: inch diameter or smaller. Output Shafts: inch male or female, -/2 inch male. Bearings: Deep-grooved ball bearings. Working Life Calculation: Estimated ours Working Life = 500 x [Cn / (2.378 x Overhung Load)]³ See table for model's Cn number, which varies with. Overhung load is in pounds. Calculation based on overhung load applied at -3/8 inches out from housing (see side view). Bearing life will increase significantly if load is positioned closer to unit. Indexes & Technical Information CBN99 40-OLA elland Model Input Output in. Straight with /4 x /8 Key 4-Bolt for Charynn & S Series Motors in. Straight with /4 x /8 Key Lube Qty. (oz) 50 Cn 00 Cn 200 Cn 500 Cn 000 Cn 800 Cn 3.38 2500 995 580 75 925 760 8.79 206

ydrostatic Transmissions Eaton Light Duty ydrostatic Transmissions Models 6 & 7 Eaton Light Duty ydrostatic Transmissions Models 6 & 7 The Eaton Light Duty ydrostatic Transmission consists of a variable displacement radial ball piston hydraulic pump, a fixed displacement radial ball piston hydraulic motor and a system of valves, all contained in one housing. It can be used in many different types of applications where variable output speed is a requirement. Features: Self contained with no external high pressure lines or components. Simplified operation. Fast response with smooth, stepless output power. Positive braking action. Note: Model 7 units include some product refinements, and feature a reduction in noise levels when compared with Model 6 units. Operation: A single lever connected to the pump section controls both speed and direction of the transmission output shaft. Infinite speed control is achieved by varying the displacement ratios between the pump and motor. Displacements: 0.465 in³/rev Variable Pump, 0.767 in³/rev Fixed Motor. Maximum Speeds: 3600 Input, 250 Output. Input orsepower: 4 P @ 3600 (Maximum). A belt drive is preferred, with the sheave diameter 4 inches or less. Locate the belt drive over the input shaft bearing to minimize side loading. Output Torque: 20 lb.in. Continuous, 80 lb.in. Intermittent, 240 lb.in. Peak. Operating Temperature: 80 F (Maximum Continuous). A cooling fan is recommended. Recommended Fluid Viscosity: 80-80 SSU is optimum. 60 SSU is low intermittent limit. 0,000 SSU is high intermittent limit (cold start-up). Eaton Light Duty ydrostatic Transmissions Models 6 & 7 Eaton Input Rotation Reservoir Freewheel Valve Output Rotation Other Features CZY53 700-022 Yes Yes Motor rotated 80 22.00 Output Rotation: When control shaft is rotated ClockWise. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 207

Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control ydrostatic Transmissions Eaton Medium Duty ydrostatic Transmission Pumps Displacements From.24 to 3.00 in³/rev Eaton Medium Duty ydrostatic Transmissions Introduction: Variable displacement piston pumps are used in closed loop systems either as a single or tandem pump. Oil is circulated by the pump to the motor and then returned directly back to the pump. A charge supply is used to supplement the closed loop system with oil. The charge supply may be supplied by an internal charge pump (standard) or an external source. Current Models: Manual Controlled: 7060 (.24in³/rev &.44in³/rev), 70360 (2.48in³/rev & 3.00in³/rev). Servo Controlled: 72400 (2.48in³/rev & 3.00in³/rev). Pressure Ratings: pressure ratings vary, see table below. All models have a 25 PSI maximum allowable case pressure. Max Charge Vacuum: 6 in. g. Max Case Drain Temperature: 225 F maximum continuous. yd Fluid Viscosity: 60-80 SSU Optimum, 45 SSU Minimum, 0000 SSU Maximum (cold start). Recommended Filtration: ISO 4406 Cleanliness Level 8/3 or cleaner. Case Drain: CAUTION - Failure to meet these requirements may result in damage to the pump & motor The mounting orientation of pumps and motors is unrestricted provided the case drain of the pump and motor remain full Position the case drain such that it assures an oil level at or above unit center line at start-up The case drain line that carries the flow leaving the pump or motor should be connected to the highest drain port on each of the units. This assures that the pump and motor cases remain full Fill the case before starting Oil level must be at or above the unit center line before starting the piston motor Provide a case drain line of adequate size to limit the case pressure to specified maximum. Dimensions: page 605 Eaton CJA2 72400-RZX-04 (ACGRALJ240 C2NNAMC000 00AAF0D) Displ (in³/rev) & Speed Rating & Pressure Ratings 3.00 3600rpm 3000psi continuous 5000psi intermittent Eaton Medium Duty ydrostatic Transmissions Mtg Flange Shaft Rot Ports Control SAE BB 5T SAE BB SAE-6 ChPmp Manual, Control SAE-6 Servo, Main, Wide SAE-2 Deadband CaseDr Chg Pump Displ (in³/rev) Chg Press Relief (psi) Other Features 0.84 250-300 SAE B 3T SAE B Auxiliary Pad, SAE-6 Chg Port C3, SAE-0 Chg Press Port C4, 4000 PSI Main Port Reliefs, Crossoop Bypass Valve Tandem Pumps, Parts for Eaton Medium Duty ydrostatic Transmissions Part Number Description CKD8 70300-603 Rotating Kit Assembly, 2.48 in³, Model 70360 5.46 CKD4 7060-902 Seal Repair Kit, Model 7060 0.2 CKD25 70360-900 Seal Repair Kit, Single Pump, Model 70360 0.20 CKD9 70344-5 Valve Plate, Rotation, 2.48 in³, Model 72400 0.42 62.00 208

Eaton eavy Duty ydrostatic Transmission Pumps Series Models 33-76 Series 2 Models 54-05 Eaton eavy Duty ydrostatic Pumps Series & Series 2 ydrostatic Transmissions Series Features: 6000 PSI Pressure Rating. 0,000 our B0 Bearing Design Life. Advanced cylinder barrel design permits high speed and pressure. Pistons have long engagement with cylinder bore resulting in low leakage. ydraulic Servo Control provides low effort operation with low control pressure. igh strength swashplates resist deflection under high load. igh strength cast iron housings provide greater noise damping and wall strength. Cast iron body geroter charge pumps. Bi-metal bearing plate has steel for high speed and pressure and bronze for greater bearing properties. A wide variety of configurations and options are available (Contact us for additional information). Series 2 Features: 6250 PSI Pressure Rating. Speeds to 450. Electronic Controls. The Series 2 Pump s single piece pump housing provides exceptional strength and soundproofing. The high-strength, one-piece swashplate has the swashlever and servo-pin integrated into the swashplate, delivering increased reliability without adding extra weight. A large diameter single servo piston permits pump operation at lower charge pressures, minimizing parasitic charge pump losses for increased overall pump efficiency. A large centering spring, housed within the servo piston, returns the pump to neutral in the event of control pressure loss. The new integral gerotor type charge pump combines excellent suction/speed capabilities in a compact design. The pump mounted electronics and sensors have been specially designed to meet the rigors of the mobile - off road enviroment, including resistance to electromagnetic interference or emissions. The serviceable bi-metal bearing plate has steel for high pressure capability and a bronze bearing face for high speed capabilities. SAE auxiliary mounts: A, B, B-B and C are available with and without charge pump. Excellent torque capability allows high horsepower to work circuits without multiple pump drives. The main system ports SAE code 6 and code 62 are available with SAE or Metric threads. side and same side configurations are now available to accommodate a wide range of installations. Peak Pressure: Series : 6000 PSI. Series 2: 6250 PSI. (Peak Pressure should not exceed % of operating time). Maximum Shaft Speed: See table below. Main Pump and Charge Pump have different maximum speed ratings. Use the lower rating for the combination. Recommended Fluid Viscosity: 80-80 SSU is optimum. 60 SSU is low intermittent limit. 0,000 SSU is high intermittent limit (cold start-up). System Temperature: 80 F Normal Continuous Limit, 220 F Maximum Intermittent Limit. Recommended Filtration: ISO 4406 Cleanliness Level 8/3 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. (The typical installation has the excess charge pump flow from the motor's charge pressure relief valve flushing the case on the pump. The motor's upper case drain line connects to the lower case port on the pump. The upper case port on the pump returns back to tank, often through a heat exchanger). The pump and motor cases must remain full at all times. Dimensions: page 609 Eaton eavy Duty Motors: page 2 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 209

ydrostatic Transmissions Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Eaton eavy Duty ydrostatic Transmission Pumps Series Models 33-76 Series 2 Models 54-05 Eaton Part No. CJD82 0003922-06 (Series 2) CJD90 0003922-09 CJE59 4623-524 CJE45 4623-477 CJM28 0006422-272 (Series 2) Displ (in³/rev) & Speed Rating 3.89 465rpm 3.90 465rpm 4.59 460rpm 4.60 460rpm 6.43 3720rpm Eaton eavy Duty ydrostatic Pumps Series & Series 2 Mtg Flange Shaft Rot Ports Control SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt 4T SAE C 4T SAE C 4T SAE C 4T SAE C 3T SAE D C Inch Code 6 with Gauge Ports Inch Code 6 with Gauge Ports Inch Code 6 Inch Code 6 Inch Code 62 with Gauge Ports Manual Manual Manual Manual Manual with Neutral Lockout Switch Chg Pump Displ (in³/rev) & Speed Rating 0.85 4300rpm 305 0.85 4300rpm 305.28 3800rpm 280.28 3800rpm 280.06 3700rpm 305 Chg Press Relief (psi) Other Features 5500 PSI Reliefs, 5000 PSI Pressure Overrides, Externally Adjustable Servo Piston Stops, 0.028 Control Orifices, SAE-A Auxiliary Mounting Pad with 9T SAE-A Spline and no shaft seal 5500 PSI Reliefs, 5000 PSI Pressure Overrides, Externally Adjustable Servo Piston Stops, 0.028 Control Orifices, 4-Bolt SAE-C Auxiliary Mounting Pad with 4T SAE-C Spline and no shaft seal SAE B 3T SAE B Auxiliary Pad with Shaft Seal (Dry), 0.073 Control Orifice, Charge Pump with Remote Pressure Filter Ports SAE B 3T SAE B Auxiliary Pad with Shaft Seal (Dry), 0.073 Control Orifice, Charge Pump with Remote Pressure Filter Ports Propel Valve Plate, 4500 PSI Reliefs, 4000 PSI Pressure Overrides, 0.044 Control Orifices, 4-Bolt SAE C Auxilliary Mounting Pad with 4T SAE-C Spline and no shaft seal Remanufactured Units: Remanufactured Units are genuine Eaton Factory Remanufactured Units that carry the same warranty as new units, and require a trade-in of your old unit. (A Core Charge is added to your invoice, and is credited when your trade-in is received). 38.00 38.00 70.00 65.00 50.00 Parts for Eaton eavy Duty ydrostatic Pumps Part Number Description CJS4 0008826-000 Gasket, Mounting Flange, Series Models 54-64 0.0 Indexes & Technical Information 20

ydrostatic Transmissions Eaton eavy Duty ydrostatic Transmission Motors Displacements From 3.32 to 7.62 in³/rev Eaton eavy Duty ydrostatic Motors Models 33 through 76 Features: 6000 PSI Pressure Rating. 0,000 our B0 Bearing Design Life. Advanced cylinder barrel design permits high speed and pressure. Pistons have long engagement with cylinder bore resulting in low leakage. igh strength cast iron housings provide greater noise damping and wall strength. Bi-metal bearing plate has steel for high speed and pressure and bronze for greater bearing properties. A wide variety of configurations and options are available (Contact us for additional information). Peak Pressure: 6000 PSI (Peak Pressure should not exceed % of operating time). Maximum Shaft Speed: See table below. Recommended Fluid Viscosity: 80-80 SSU is optimum. 60 SSU is low intermittent limit. 0,000 SSU is high intermittent limit (cold start-up). System Temperature: 80 F Normal Continuous Limit, 220 F Maximum Intermittent Limit. Recommended Filtration: ISO 4406 Cleanliness Level 8/3 or cleaner. CAUTION: Before the motor is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. (The typical installation has the excess charge pump flow from the motor's charge pressure relief valve flushing the case on the pump. The motor's upper case drain line connects to the lower case port on the pump. The upper case port on the pump returns back to tank, often through a heat exchanger). The case of the pump and motor must remain full at all times. Dimensions: page 609 Eaton eavy Duty Pumps: page 209 Eaton CJM20 3333-059 CW96 000393-090 CEL8 0003933-003 CJ42 4633-09 CJM47 5433-74 CJM38 0006433-034 CJE78 643-090 Eaton eavy Duty ydrostatic Motors Models 33 through 76 Displ (in³/rev) & Speed Rating 3.32 450 3.89 460 3.89 460 4.60 460 5.44 3720 6.43 3720rpm 6.43 3720rpm Mtg Flange Shaft Ports SAE C 4-Bolt SAE C 4-Bolt SAE 4-Bolt C SAE 4-Bolt C SAE 4-Bolt C SAE 4-Bolt C SAE 4-Bolt C 4T SAE C 4T SAE C 4T SAE C 4T SAE C 4T SAE C 4T SAE C 4T SAE C Inch Code 62 Inch Code 6 Inch Code 6 Inch Code 62 Inch Code 6 Inch Code 62 Inch Code 62 igh Pressure Reliefs (psi) Charge Pressure Relief (psi) Other Features None 240 83.00 4000 220 83.00 5000 60 83.00 None 240 83.00 None 280 06.00 None 60 65.00 5500 220 30.00 Remanufactured Units: Remanufactured Units are genuine Eaton Factory Remanufactured Units that carry the same warranty as new units, and require a trade-in of your old unit. (A Core Charge is added to your invoice, and is credited when your trade-in is received). ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 2

ydraulic Cylinders Tie Rod -/2" Bore Midway DA Series Features: Ductile iron rod clevis, base clevis and cylinder head. Aluminum alloy piston with o-ring seal and backup rings. Self locking piston nut. Metal clad rod wiper. Ground & polished chrome plated rod. Precision honed cylinder tube. igh tensile steel tie rods. Zinc plated clevis pins and clips. Maximum Operating Pressure:. Dimensions: page 62 -/2" Bore Midway DA Series Midway Model Bore (in) Stroke (in) Rod Dia (in) Ports Pin to Pin Retracted (in) Pin to Pin Extended (in) Pin Dia (in) CEG69 504TR.50 4 0.75 /4 NPT 3.25 7.25 0.625 9.75 CAK80 506TR.50 6 0.75 /4 NPT 5.25 2.25 0.625 0.70 CAK8 508TR.50 8 0.75 /4 NPT 7.25 25.25 0.625.90 CAK90 52TR.50 2 0.75 /4 NPT 2.25 33.25 0.625 3.85 2" to 5" Bore Monarch TL & TX Series TL Series Features: Ductile iron rod clevis, base clevis and cylinder head. Ductile iron piston with o-ring seal and backup rings. Self locking piston nut. Metal clad rod wiper. ard chrome plated shaft. Precision finished skive & burnished heavy steel wall tube. igh tensile steel tie rods. Zinc plated high tensile steel pins & retainers. Double ported. TX Series Features: Lighter weight / Lesser cost Ductile iron castings Double ported base caps working pressure, 5000 PSI proof pressure Offered in red & black (standard stock models are red) Offered in inline and 90 to pin port orientations (standard stock models are ports inline with pins). Maximum Operating Pressure:. Note: ASAE cylinders (2 to 4 bore) have threaded shaft to accept optional mechanical stroke control. Note: TL Series cylinders are double ported both ends, and are assembled with ports inline with pins. TX Series cylinders rod end port (just one port) is inline with pin unless noted otherwise, blind end is double ported and is assembled inline with pin (unless noted otherwise). Application Considerations: Long stroke cylinders have lower full extension ratings to prevent excessive column loading (buckling of shaft). See tables. Dimensions: page 62 2" to 5" Bore Monarch TL & TX Series Rod Dia (in) Pin to Pin Retracted (in) Pin to Pin Extended (in) Monarch Model Bore (in) Stroke (in) Ports CJX54 2006TX 2 6.25 3/8 NPT 6.25 22.25.00 2500 7854.34 CKB88 2008TX 2 8.25 3/8 NPT 8.25 26.25.00 2500 7854 2.70 CKA40 2008TX-ASAE 2 8.25 3/8 NPT 20.25 28.25.00 2500 2272 2.96 CKJ47 200TX 2 0.25 3/8 NPT 20.25 30.25.00 2500 7854 4.00 CJX55 202TX 2 2.25 3/8 NPT 22.25 34.25.00 2500 7854 5.00 CKA45 204TX 2 4.25 3/8 NPT 24.25 38.25.00 2500 7854 6.05 CJX56 206TX 2 6.25 3/8 NPT 26.25 42.25.00 2500 2272 7.00 Pin Dia (in) Full Extension Rated Pressure (psi) Full Extension Rated Load (lbs) ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 22

ydraulic Cylinders Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Tie Rod Monarch Model Bore (in) Stroke (in) 2" to 5" Bore Monarch TL & TX Series Rod Dia (in) Ports Pin to Pin Retracted (in) Pin to Pin Extended (in) CKJ49 208TX 2 8.25 3/8 NPT 28.25 46.25.00 2500 7854 9.00 CKJ50 2020TX 2 20.25 3/8 NPT 30.25 50.25.00 2500 7854 2.00 CKJ53 2024TX 2 24.25 3/8 NPT 34.25 58.25.00 280 6850 23.00 CKF98 2508TX 2.5 8.25 3/8 NPT 8.25 26.25.00 2500 2272 4.25 CJR55 2508TX-ASAE 2.5 8.25 3/8 NPT 20.25 28.25.00 2500 2272 4.66 CJX94 250TX 2.5 0.25 3/8 NPT 20.25 30.25.00 2500 2272 5.40 CJR57 252TX 2.5 2.25 3/8 NPT 22.25 34.25.00 2500 2272 23.39 CJR58 254TX 2.5 4.25 3/8 NPT 24.25 38.25.00 2500 2272 8.57 CJR59 256TX 2.5 6.25 3/8 NPT 26.25 42.25.00 2500 2272 9.55 CKJ63 258TX 2.5 8.25 3/8 NPT 28.25 46.25.00 2500 2272 24.00 CKJ64 2524TX 2.5 24.25 3/8 NPT 34.25 58.25.00 225 0435 28.00 CJY56 3006TX 3 6.25 /2 NPT 6.25 22.25.00 2500 7672 6.20 CKG2 3008TX 3 8.25 /2 NPT 8.25 26.25.00 2500 7672 7.95 CJY57 3008TX-ASAE 3 8.25 /2 NPT 20.25 28.25.00 2500 7672 8.30 CKJ85 300TX 3 0.25 /2 NPT 20.25 30.25.00 2500 7672 2.00 CKJ86 302TX 3 2.25 /2 NPT 22.25 34.25.00 2500 7672 23.00 CJY66 304TX 3 4.25 /2 NPT 24.25 38.25.00 2500 7672 22.80 CJY67 306TX 3 6.25 /2 NPT 26.25 42.25.00 2500 7672 25.00 CKJ87 308TX 3 8.25 /2 NPT 28.25 46.25.00 2340 6560 28.00 CKJ90 3020TX 3 20.25 /2 NPT 30.25 50.25.00 985 4025 30.00 CKJ9 3024TX 3 24.50 /2 NPT 34.25 58.25.00 2500 7672 37.00 CKJ99 3508TX-ASAE 3.5 8.25 /2 NPT 20.25 28.25.00 2500 24053 25.00 CKJ98 3508TX 3.5 8.25 /2 NPT 8.25 26.25.00 2500 24053 24.00 CKK 350TX 3.5 0.25 /2 NPT 20.25 30.25.00 2500 24053 26.00 CKK2 354TX 3.5 4.25 /2 NPT 24.25 38.24.00 2500 24053 30.00 CKK3 356TX 3.5 6.25 /2 NPT 26.25 42.25.00 2060 9840 32.00 CKK4 358TX 3.5 8.50 /2 NPT 28.25 46.25.00 2500 24053 37.00 CKK2 4008TX 4 8.25 /2 NPT 8.25 26.25.00 2500 346 29.00 CKK22 400TX 4 0.25 /2 NPT 20.25 30.25.00 2500 346 3.00 CKK23 402TX 4 2.25 /2 NPT 22.25 34.25.00 2400 3095 34.00 CKK24 408TX 4 8.50 /2 NPT 28.25 46.25.00 2500 346 44.00 CKK28 4024TX 4 24.50 /2 NPT 34.25 58.25.00 720 2645 52.00 Monarch TL & TX Series Cylinders Replacement Parts Part Number Description CZX7 6400 Clevis Clips ( Bag of 2 clips) 0.4 CBX27 64009-MONARC Clevis Pin & Clip Kit, contains (2) Clevis Pins and (4) Clips.00 CFN8 492650 Rod Clevis for 2 & 2-/2 Inch Bore TL Series Cylinders, Inch Pin Size.84 CG54 492652 Rod Clevis for 3, 3-/2 & 4 Inch Bore TL Series Cylinders, Inch Pin Size 2.9 CDK2 RK20L-2 TL Series Seal Kit, 2 Inch Bore, -/8 Inch Rod 0.06 CDK3 RK25L-2 TL Series Seal Kit, 2-/2 Inch Bore, -/8 Inch Rod 0.08 CDK4 RK25L-25 TL Series Seal Kit, 2-/2 Inch Bore, -/4 Inch Rod 0.20 CDK5 RK30L-25 TL Series Seal Kit, 3 Inch Bore, -/4 Inch Rod 0.09 CDK6 RK30L-50 TL Series Seal Kit, 3 Inch Bore, -/2 Inch Rod 0.08 CDK7 RK35L-25 TL Series Seal Kit, 3-/2 Inch Bore, -/4 Inch Rod 0.09 Pin Dia (in) Full Extension Rated Pressure (psi) Full Extension Rated Load (lbs) 23

ydraulic Cylinders Tie Rod Monarch TL & TX Series Cylinders Replacement Parts Part Number Description CDK8 RK35L-50 TL Series Seal Kit, 3-/2 Inch Bore, -/2 Inch Rod 0.09 CDK9 RK40L-25 TL Series Seal Kit, 4 Inch Bore, -/4 Inch Rod 0.0 CDK20 RK40L-50 TL Series Seal Kit, 4 Inch Bore, -/2 Inch Rod 0.0 CDK69 SB25-00 Steel Stop Bushing, 2-/4" OD, " wide, for -/4 Rod 0.76 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 24

ydraulic Power & Control ydraulic Cylinders Custom Georgia ydraulic Cylinders Georgia ydraulic Cylinders has a reputation for building quality cylinders, quickly, at a reasonable cost. New applications, as well as replacing existing industrial or mobile cylinders, are welcome. Please contact us for application assistance. Pneumatic Power & Control 2500 Series Welded - Medium Duty: Suitable for medium pressure hydraulic service Cast iron head and piston are made from fine grained centrifugally cast bar Piston rod is ground, polished and plated medium carbon steel Teflon piston seals are available O-ring boss ports are available Optional high temperature seals. Dimensions: page 63 Fluid Conveying Miscellaneous Products Indexes & Technical Information 3000 Series Welded - eavy Duty: Suitable for high pressure applications Cast iron piston rings or Teflon piston rings are available Internal cushioning is available O-ring boss ports are available Optional high temperature seals. Dimensions: page 64 LA- Series - Tie Rod: LA Series (Air) L Series (Low Pressure ydraulic) Series (igh Pressure ydraulic) Custom Cylinders: Manufactured to your specifications Bore sizes to 20 inches Lengths to 20 feet. 25

Custom DM ydraulics, LLC Cylinders ydraulic Cylinders DM ydraulics, LLC designs and manufactures single acting, double acting, and telescopic hydraulic cylinders for mobile equipment applications. Please contact us for application assistance. Ram: DM manufactures " to 3" solid rod rams and 3" to 5" hollow rod ram cylinders. DM has various ram designs including an adjustable v-packing design, a polypak rod seal design and a heavy duty design to accommodate sideloading. Double Acting: DM custom designs and manufactures " to 6" bore double acting cylinders to meet the application's requirements. Standard double acting cylinders accommodate operating pressures up to 3,000 PSI. Telescopic: DM is considered the industry leader in small bore, single acting and double acting telescopic cylinders. They custom design their telescopic cylinders to meet the application's requirements. Piggyback: DM's piggyback cylinders are designed to accommodate applications that require additional stroke and require consistent extension and retraction speed. Rephase: DM's rephase cylinders are designed to synchronize the extension and retraction of two or more cylinders. These cylinders are custom designed to meet the specific requirements of the application. Aluminum: DM is the leading global manufacturer of aluminum hydraulic cylinders. These cylinders are very durable, lightweight and used in highly corrosive environments. The aluminum cylinders are rated to accommodate operating pressures up to 3,000 PSI. Double Rod End: DM manufactures double rod end cylinders for a variety of applications that require push and/or pull force from both ends of the cylinder. Integrated Valving: Many of DM's cylinder designs have integrated valving including counterbalance valves, pilot-operated check valves, sequencing valves and thermal relief valves as required to meet the performance requirements of the application. Linear Feedback: Linear feedback devices can be internally or externally mounted to provide precise cylinder position. These cylinders are used for accurate positioning and velocity control. eavy Duty: DM's heavy duty cylinders are designed to meet the requirements of rugged applications including sideloading, operating pressures up to 5,000 PSI, pressure spikes up to 0,000 PSI, and high shock and vibration levels. Locking: DM designs and manufactures locking cylinders for applications that require a mechanical locking system. Their mechanical locking features are integrated into the design of the cylinder. Screw Actuator: DM also manufactures hydraulically driven screw actuators that are custom designed for applications required to move up to 0,000 lbs. or more at speeds of 00 in./min. The acme screw has mechanical self locking capability in any position. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 26

Steering Units & Accessories Charynn Power Steering Charynn Series 3-6-2 Steering Control Units Open Center, Nonoad Reaction Traditional power steering units for applications that don't require integral valve capabilities. Max. System Pressure:. Max. Back Pressure: 300 PSI. Operating Temperatures: Maximum System Operating Temperature is 200 F. Maximum differential between steering unit and system temperature is 50 F. Input Torque: 25-35 lb-in @ 00 PSI back pressure for powered applications. 00 lb-ft maximum for non-powered applications. Fluids: Most petroleum based fluids and ATF Type A. Recommended Filtration: ISO 8/3 Cleanliness Level. Dimensions: page 65 Charynn Series 3-6-2 Steering Control Units Open Center, Nonoad Reaction Charynn Model Displacement (cu.in./rev) Rated () Ports Special Features CBC 2-00 4.5 2-4 9/6-8 St.Thd O-Ring.68 CBC2 2-007 4.5 4-8 3/4-6 St.Thd O-Ring.0 CBC3 2-008 5.9 4-8 3/4-6 St.Thd O-Ring.3 CJX62 2-002 6.2 2-4 9/6-8 St.Thd O-Ring.48 CBC4 2-009 7.3 4-8 3/4-6 St.Thd O-Ring.44 CBC5 2-00 9.7 4-8 3/4-6 St.Thd O-Ring 2.00 CBC6 2-0.3 4-8 3/4-6 St.Thd O-Ring 2.7 CBC7 2-02 4. 4-8 3/4-6 St.Thd O-Ring 2.55 CBC8 2-58 7.9 4-8 3/4-6 St.Thd O-Ring 3.33 CBC2 2-77 23.8 8-6 3/4-6 St.Thd O-Ring 4.50 CBC22 2-78 29.7 8-6 3/4-6 St.Thd O-Ring 5.05 CBC9 2-60 35.9 8-6 3/4-6 St.Thd O-Ring 6.33 CKJ56 2-79 45. 8-6 3/4-6 St.Thd O-Ring 8.30 Parts For Charynn Series 3-6-2 Steering Control Units Part Number Description CAB58 006448-000 Seal Kit, Buna-N, -00 Series. Quad Ring Shaft Seal. 0.04 CAB6 0064466-000 Seal Kit, Buna-N, -00-002 Series. 0.04 CAB62 0064470-000 Seal Kit, Buna-N, with Low Input Torque Seal (replaces Quad-Ring), -00-002 Series 0.03 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 27

Steering Units & Accessories ydraulic Power & Control Charynn Power Steering Steering Columns for Charynn Series 3-6-2 Features: Column & mounting flange is a sturdy single weldment. The method of retaining bearing & shaft provides high thrust load and side load capacity. Dust seal protects against dirt and moisture. Available with serrated or keyed shaft. One or two horn wires are available with the serrated shaft. Dimensions: page 65 Pneumatic Power & Control Fluid Conveying Steering Columns for Charynn Series 3-6-2 Charynn Model Length (in) Shaft Type orn Wire CAY2 204-00 2.5 No.72 CAY22 204-002 2.5 Serrated No.86 CAY23 204-004 6.0 Serrated No 2.20 CJF42 204-036 8.0 Serrated No 2.40 CAY24 204-006 30.0 Serrated No 5.7 C76 204-008 30.0 Serrated Wire 5.7 Note: As of February 28, 2008, mounting bolts are being be furnished with the columns (4ea 3/8-6 x 3/4 2-point cap screws). Accessories For Charynn Steering Columns Part Number Description CGM77 990058-000 Bolt Kit containing (4) 3/8-6 x 3/4 2-point cap screws (to bolt the column to the steering unit) 0.4 Indexes & Technical Information Miscellaneous Products 28

Steering Units & Accessories Charynn Power Steering Steering Wheels & Accessories for Charynn Series 3-6-2 Steering Wheels & Accessories for Charynn Series 3-6-2 Charynn Model Description CBB32 209-007 Steering Wheel, Standard, 7 inch diameter, black. Fits 3/6-20 Serrated Columns. 4.45 CJD36 209-04 Steering Wheel, thin 3-spoke design, 5 inch diameter. Fits 3/6-20 Serrated Columns. 4.3 CAA78 002084-000 ex Nut for attaching Steering Wheel to Serrated Column. 3/6-20 UNF. 0.09 CBB3 209-005 Steering Wheel Cap (For installations without horn) 0. CBA26 208-03 orn Button Kit 0.37 Other Charynn Steering Products Other Charynn Steering Products Charynn Model Description CGM65 0064500-000 Seal Kit for 27 Series (Gerotor) Torque Generator 0.03 CJX53 200-0039 CJC53 606-345-003-QA CJC39 233-4005-003 Series 0 Steering Control Unit, 2,, 28.2 in³/rev, Open Center, Nonoad Reaction, 45 PSI Max Back Pressure, Manual Steering Check, SAE-8 Ports, 2 x M2 Mounting Threads Port Face, 4 x M0 Mounting Threads Mounting Face, VLE Inine Priority Control, 40, Standard Metering, Dynamic Load Sense Pilot with Standard.23 Boost, 00 lbf/in² Control Spring, Relief, Ports CF (SAE-0) P & EF (SAE-2) LS & T (SAE-4) Series 20 Steering Control Unit, 7,, 45. in³/rev, Load-Sensing, Dynamic Signal, Nonoad Reaction, Anti-Cav Check, SAE-8 Main Ports, SAE-4 LS Port, Low Input Torque, Wide Angle Deflection 7.77 2. 2.67 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 29