COMMISSIONING ENGINEER First name David Sauvager Age 27 Availability september Competences Instrumentation (level, pressure, flow, temperature sensor ; pressure, level, flow, temperature transmitter; control valve; on/off valve, switch etc. Calibration, adjusting instrumentation, calibration Commissioning and start-up Report Writing Writing procedure, preparation work Traceability management Preventive and curative maintenance Control different points on an instrumentation loop Commissioning instrumentation loops Work with methodology and rigor Investigation and troubleshooting of faults (shooting disorder, punch list) Reading plans (PID, electrical, Profibus, optical fibber), the engineering specifications Contact supplier Cryogenics Teamwork and autonomy Relational Service, technical assistance Activity sectors Energy (Nuclear / Gas) Pharmaceutical Industry Space Industry Mining
EXPERIENCE Company Alstom Profession Commissioning Engineer Start date June 2015 End date July 2015 Description Hydro power plant Linthal Switzerland Commissioning of the compressor giraudin Sauer, and pressure system Perform tests different process sequence, and safety Check the running and safety sequence Settings instruments by reporting to the specifications Test of safety devices Investigations on sequence defects, to improve the Network Operations Maintenance Leak test Automation studio Company Cryostar Profession Commissioning Engineer Start date February 2014 End date May 2015 Description manufacturer and commissioning cryogenic equipment for Lng Vessel Commissioning, start-up and service of the compressors and service on LNG ships for various customers (Samsung, Hyundai, Daewoo in South Korea) Listing missing or defective equipment Checking consistency with PID Commissioning and calibration of instruments: Masoneilan valve (control or on/off, positioner ABB; Yokogawa transmitters; pt 100; thermostat; pressure switch; vibration, temperature transmitter Technical assistance Calibration Report Writing and tracking sheet Trouble shooting Test I/O with supervision Start machinery, and different test Work onshore ( commissioning) and offshore ( gastrial) Investigation Relational Compressor 4,2,1 stage; exchanger, ( work Kongsberg and yokogwa software)
Company Baxter incorporation Profession Calibration technician Start date October 2013 End date January 2014 DESCRIPTION Manufacturing bio organic drugs (Advate) in Switzerland Obsolescence Project for instrumentation FDA compliance Instruments Listing Documentation Search Search for FDA compatibility requirements Development of traceability of these instruments Calibration instruments Calibration report writing Work with GMPs Work on production line (special dressing to pharmaceuticals) Contact supplier Wika manometer, rosemount transmitters, RAM Company Cegelec Profession Instrumentation technician Start date November 2012 End date August 2013 Description Mining site in New Caledonia Pre-commissioning and commissioning ( power plant, coal plant, refinery) on the mining site Investigations on the problems of instrumentation loops (trouble shooting, punch list) Improved instrumentation loops Checks instrumentation loops (ABB instruments to modules) Instrument settings (flow meter, pressure transmitter, PT100, thermocouples, Endress Hauser transmitter, ABB module, safety relays Pills, capacitive level switch, reed, speed sensor, limit switch, On/off control valve, thermostat, pressure switch, Electrical Maintenance (control cabinet, frame grabber modules and ABB) Commissioning of PROFIBUS networks Preparation work Pressure calibrator uses (Druck) of the pocket hart Use of International alpha code
Company Boccard Profession Instrumentation technician Start date September 2012 End date October 2012 Description Installation AGATE ( liquid radioactive effluent treatment ) at CEA (Atomic Energy) Cadarache Commissioning of the AGATE facility for the CEA for Phase 3 trials Technical assistance to Areva on process testing, commissioning, network configuration, adjusting instrumentation for process management Perform tests different process sequence, and safety Check the running and safety sequence Settings instruments by reporting to the specifications Test of safety devices Investigations on sequence defects, to improve the Network Operations Maintenance Company Cegelec Profession Fluid Instrumentation technician Start date March 2011 End date July 2012 Description Spatial, launchers Ariane and Soyouz in French Guyana (Kourou) Operation on fluid facilities dedicated to resupplying the cryogenic main stage of the Ariane 5 launcher. Manage the control of the ventilation of satellites for Ariane and Soyuz Manage the fuelling of the tank and the engine of the cryogenic main stage Management of fluid networks (Compressed Air, Oxygen, Hydrogen, Nitrogen, Helium) pressure up to 600 bar. Ensuring the cleanliness of fluid networks, cleanliness test, humidity, sealing Investigations on outages Calibration of different instruments (pressure sensor fisher, fuji, pressure switches, valves etc.) Writing procedure Operations results Process Management via supervision fluid Technician Industrial maintenance Responsible critical operation: (5-6 person to manage)
TOOLS Tool Level 1 to 4 (1 low 4 expert) Fluck, druck, hart communicator 4 36 Office 3 12 Duration of use (in months) EDUCATION YEAR SCHOOL DEGREE 2010 Saint Jean Baptiste de la salle (Nantes France) BTS CIRA ( Industrial control and automatic regulation) 2008 Saint Jean Baptiste de la salle (Nantes France) High school diploma in electronic engineering LANGUAGE SKILLS LANGUAGES LEVEL* CERTIFICATES, TRIPS, STAYS, French Mother tongue English Advanced * Beginner Intermediate Advanced Superior Mother tongue