43 Wattmeters THRULINE instruments can be left in the line for continuous monitoring of either transmitter or reflected power. The frequency range (0.45-2700 MHz) and power range (100 mw - 10 KW) are determined by low-cost plug-in elements sold separately. Includes a 30-microampere meter with scales of 25, 50, and 100 unit calibrations to permit full-scale direct power reading. Peak reading models read true peak power output at?8% of full-scale accuracy. Watt Meter Chassis 43948 43 N/F QC N-F connectors on both ends 4.09 82341 17520 75174 43/NM-NF 43/TNC 43/TNC-MINIU QC N-M on one end & QC N-F on the other. QC TNC-F on both ends QC TNC-F, and QC mini UHF-F 4.27 1.94 4.23 1.92 4.10 55913 43/UHF QC UHF-F on both ends. 4.09 30734 43P QC N-F on both ends. Peak Reading in CW, SSB, AM and Limited Pulse signals. 4.49 2.04 Elements for 43 Series Wattmeter Thruline elements (slugs) for Wattmeters o Fits 43, 4430, 4431, 4381, 4385, 4520 series Wattmeters o See Wattmeter Element Quick Pick for all available elements o Select from the table sorted by Frequency, then Power Wattmeters Page 1 of 5 14 2900 Argentia Road, Mississauga, ON L5N 7X9
Freq. Range (MHz), Max Power (Watts) 56637 50H 2-30 MHz 50 W 92134 100H 2-30 MHz 100 W 33033 250H 2-30 MHz 250 W 45921 500H 2-30 MHz 500 W 93383 1000H 2-30 MHz 1000 W 92532 78920 19819 57886 80169 27313 5A 10A 25A 50A 100A 10B 25-60 MHz 5 W 25-60 MHz 10 W 25-60 MHz 25 W 25-60 MHz 50 W 25-60 MHz 100 W 50-125 MHz 10 W 96279 50B 50-125 MHz 50 W 28562 100B 50-125 MHz 100 W 79318 5C 100-250 MHz 5 W 65706 10C 100-250 MHz 10 W 96605 25C 100-250 MHz 25 W Wattmeters Page 2 of 5 14 2900 Argentia Road, Mississauga, ON L5N 7X9
44672 50C 100-250 MHz 50 W 66955 100C 100-250 MHz 100 W 97854 250C 100-250 MHz 250 W 20742 500C 100-250 MHz 500 W 27711 5D 200-500 MHz 5 W 14099 10D 200-500 MHz 10 W 44998 25D 200-500 MHz 25 W 83065 15348 66104 52492 83391 50D 100D 5E 10E 25E 200-500 MHz 50 W 200-500 MHz 100 W 400-1000 MHz 5 W 400-1000 MHz 10 W 400-1000 MHz 25 W 69851 50E 400-1000 MHz 50 W 53741 100E 400-1000 MHz 100 W 84640 250E 400-1000 MHz 250 W 92876 801-1 800-1000 MHz 1 W 450023 25L1 1700-1990 MHz 25 W Wattmeters Page 3 of 5 14 2900 Argentia Road, Mississauga, ON L5N 7X9
464026 99073 50L1 431-20 1700-1990 MHz 50 W 2400-2500 MHz 1 W 4304A Broadband Wattmeter THRULINE instruments can be left in the line for continuous monitoring. Allows readings from 25-1000 MHz at five power range settings of 5, 15, 50, 150, and 500 Watts (power limited to 150 Watts from 800-1000 MHz). A single directional element is included that covers the full bandwidth. No other elements are needed. 88586 4304A 5000 Digital Power Meter QC "N" connectors installed plus an additional set of UHF-F QC connectors 's Model 5000 THRULINE Digital RF Power Meter combines a digital display with the ability to accurately measure power in analog and digital RF systems. The Model 5000 operates over a broad frequency range and has the ability to measure True Average Power. The Model 5000 handles Cellular, PCS, ISM, UMTS, 3G Wireless, WLL, Paging, Conventional/Trunked radio, Aviation, Military, and Analog or Digital Audio and Television Broadcast. The highly visible, backlit LCD display simultaneously shows forward and reflected power or other selected parameters in digital format, while a 20-segment analog bar graph tracks forward power readings. Readings can be expressed as Watts, db Return Loss and % Match Efficiency. VSWR is automatically calculated from forward and reflected power for fast, convenient antenna checks. 4.36 1.98 FEATURES AND BENEFITS: Frequency Range: 2 MHz to 3600 MHz Requires either the 5010B, 5011 or 5012 Power Sensor RF Power Range: 1 W to 1000 W Frequency and Power ratings are determined by the DPM Elements Wattmeters Page 4 of 5 14 2900 Argentia Road, Mississauga, ON L5N 7X9
Digital Power Meter Chassis 421542 5000EX Digital RF Power Meter, 9-pin D-shell RS-232 serial connector ( To the sensor ). Can be used with the 5010, 5011, or 5012 sensor. 3.30 1.50 414182 DPM 5000EX/5010B 5000EX with the 5010 sensor. DPM Elements sold separately! 8.00 3.64 410532 5000EX/5012 5000EX with the 5012 sensor. 8.00 3.64 Elements & Sensors for 5000 Series Thruline Elements for the DPM 5000 Series Wattmeters o Fits DPM5000 Series Wattmeters o Select element from the table sorted by Frequency, then Power 471634 482136 5010B 5011 Freq. Range (MHz), Max Power (Watts) N/F DPM 5010B- Adds peak power measurement capabilities to the normal functionality of the 5010 Sensor. Peak power measurements are made using "43" elements, DPM elements are still required for normal power measurements. N/M Terminating Power Sensor, 40 MHz to 4 GHz. Compatible with both the 5000 digital power meter and the SA-series Site Analyzer. 491546 5012 N/Female Wideband Inline Power Sensor. 350 MHz to 4 GHz, 0.15 to 150 Watts (400 peak). Standalone data logging operation. USB, RS-232, DPM data connections. 452306 8353A040-50 M/F N, 40 db Attenuator for use with the 5011 Terminating Power Sensor. 83405 DPM-50L1 1700-1990 MHz 50 W 424592 DPM-500L1 1700-1990 MHz 500 W Wattmeters Page 5 of 5 14 2900 Argentia Road, Mississauga, ON L5N 7X9