STI Gasketed Sewer Fittings SDR 35 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 G STI fittings feature a one-piece integral bell and an extended prealignment entrance that aids in proper alignment of pipe and fittings. In addition to scientifically formulated resins, square pipe stops resist pipe push-through while extra heavy support is provided under the pipe stop at branch intersections for added strength. Where available, reducing branches on injection molded 8, 10, and 12 tees, wyes, and tee-wyes shall be minimum DR18 wall thickness in the reducing branch body and reducing branch hub area below the gasket race. Applications STI Gasketed Sewer fittings are intended for non-pressure drainage of sewage and surface water. Certification STI Gasketed Sewer fittings are third party tested and listed by NSF, UPC and CSA to meet specifications defined in ASTM D 3034, ASTM F 1336 and CSA B182.2, where applicable. Product Spotlights Controlled Settlement Joint The controlled settlement joint (CSJ) inhibits penetration of the riser through the lateral connection and into the waterway. The new double gasketed CSJ is a slip joint that permits a maximum of 5-1/2 of axial movement of the riser with forces exceeding 500 lb/feet. Riser movement typically occurs from settlement forces or concentrated loads resulting from elevation changes in service connections. The controlled settlement joint in conjunction with proper backfill techniques, offers a solution that inhibits damage such as splitting, cracking, or spearing. As a result, this minimizes costly excavation and replacement of damaged system components. Plastic Trends Controlled Settlement Joint has certification listing through CSA. It is available in diameters of 4, 5, or 6 and in SDR 26, SDR 28, or SDR 35. Refer to page G8 for pricing and available configurations. Vertical Riser Adapter (G984, G986, G988) This simple solution in conjunction with the unique integral flange, Short Specs STI Gasketed Sewer Fittings SDR 35 (4-12 ) 4 through 12 injection molded gasketed SDR 35 sewer fittings shall be manufactured in accordance with ASTM D 3034, ASTM F1336, and CSA B182.2. They shall be injection molded from virgin PVC compound having a cell classification of 12454 or 13343 in accordance with, and certified by the National Sanitation Foundation (NSF), to meet ASTM D 1784. Gaskets shall be manufactured in accordance with ASTM F 477 or ASTM F 913. Gaskets shall be firmly seated in fitting in order to ensure proper installation and to prevent dislocation or misalignment during system assembly. Gasket joints must comply with ASTM D 3212 Internal Pressure Test (exfiltration) and Vacuum Test (infiltration) at 5 degrees of gasket joint deflection and top load deflection. Where available, reducing branches on injection molded 8, 10, and 12 tees, wyes, and tee-wyes shall be minimum DR18 wall thickness in the reducing branch body and reducing branch hub area below the gasket race. Gasketed SDR 35 sewer fittings shall be certified by the National Sanitation Foundation (NSF) and, in applicable configurations, by the International Association Of Plumbing And Municipal Officials (IAPMO) to meet ASTM D 3034, and by the Canadian Standards Association (CSA) to meet CSA B182.2. ATTENTION: Plastic Trends fittings are not to be used with compressed air or gases. Plastic Trends does not recommend that piping systems that include its products be tested with compressed air or gases. inhibits system failure due to pipe spearing beyond the pipe stop. Refer to page G10 for pricing and available configurations. Third y Tested Sam Roberts & Associates, Inc. www.stanroberts.com South Texas North Texas 3300 Capitol 1220 Round Table Dr. Houston, Texas 77003-3305 Dallas, Texas 75247-3504 713-224-9845 214-637-2816 800-392-6583 800-462-1195 Fax: 713-224-3611 Fax: 214-688-4155
*Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC Denotes Assembled *Denotes from Molded Molded Components Fitting Items in Bold feature Heavy Duty Specifications: Branches (SDR18) ASTM D3034, Third F1336, party CSA tested B182.2 and listed by CSA, NSF and UPC Denotes Assembled from Molded Components Additional Sizes Available Upon Request Page G1 Additional Sizes Available Upon Request Non-Stock items are non-cancelable, non-returnable Page G2 Stan Roberts & Associates, Inc Houston - 800-392-6583 Dallas - 800-462-1195 Straight Tee GxGxG 45 Degree Wye GxGxG *4 x 4 G104 12-27.60 *4 x 4 G304 10-29.38 *6 x 4 G106-4 4 54 57.87 *6 x 4 G306-4 4 50 59.59 *6 x 6 G106 4 50 59.16 *6 x 6 G306 4 20 67.47 *8 x 4 G108-4 2 30 88.45 *8 x 4 G308-4 3 32 88.91 *8 x 6 G108-6 2 30 92.49 *8 x 6 G308-6 2 28 106.03 *8 x 8 G108 2 13 131.25 *8 x 8 G308 2 12 184.86 *10 x 4 G1010-4 1 12 290.45 *10 x 4 G3010-4 1 24 304.97 *10 x 6 G1010-6 1 11 295.35 *10 x 6 G3010-6 1 20 310.12 *10 x 8 G1010-8 1 10 467.29 *10 x 8 G3010-8 1-490.65 *10 x 10 G1010 1 10 479.77 *10 x 10 G3010 1-545.87 *12 x 4 G1012-4 1 8 355.12 *12 x 4 G3012-4 1 8 389.41 *12 x 6 G1012-6 1 8 374.28 *12 x 6 G3012-6 1 6 401.55 *12 x 8 G1012-8 1 7 513.65 *12 x 8 G3012-8 1-599.86 *12 x 10 G1012-10 1 7 602.30 *12 x 10 G3012-10 1-733.21 *12 x 12 G1012 1 6 689.40 *12 x 12 G3012 1-763.32 15 x 4 L1015-4 1-576.51 15 x 4 L3015-4 1-587.42 15 x 6 L1015-6 1-620.92 15 x 6 L3015-6 1-703.55 15 x 8 L1015-8 1-668.50 15 x 8 L3015-8 1-784.56 15 x 10 L1015-10 1-744.22 15 x 10 L3015-10 1-942.87 15 x 12 L1015-12 1-878.20 15 x 12 L3015-12 1-1,050.33 15 x 15 L1015 1-1,140.63 15 x 15 L3015 1-1,326.24 18 x 4 L1018-4 1-1,454.89 18 x 4 L3018-4 1-1,527.64 18 x 6 L1018-6 1-1,504.21 18 x 6 L3018-6 1-1,579.42 18 x 8 L1018-8 1-1,571.57 18 x 8 L3018-8 1-1,650.15 18 x 10 L1018-10 1-1,632.05 18 x 10 L3018-10 1-1,713.65 18 x 12 L1018-12 1-1,676.68 18 x 12 L3018-12 1-1,760.51 18 x 15 L1018-15 1-1,785.62 18 x 15 L3018-15 1-1,828.45 18 x 18 L1018 1-1,885.62 18 x 18 L3018 1-2,375.03 21 x 4 L1021-4 1-2,046.68 21 x 4 L3021-4 1-2,173.32 21 x 6 L1021-6 1-2,195.50 21 x 6 L3021-6 1-2,329.59 21 x 8 L1021-8 1-2,358.34 21 x 8 L3021-8 1-2,627.26 21 x 10 L1021-10 1-2,533.99 21 x 10 L3021-10 1-2,961.38 21 x 12 L1021-12 1-2,716.09 21 x 12 L3021-12 1-3,202.73 21 x 15 L1021-15 1-3,031.52 21 x 15 L3021-15 1-3,709.28 21 x 18 L1021-18 1-3,440.00 21 x 18 L3021-18 1-4,368.14 21 x 21 L1021 1-4,559.72 21 x 21 L3021 1-5,715.73 24 x 4 L1024-4 1-3,229.42 24 x 4 L3024-4 1-3,390.89 24 x 6 L1024-6 1-3,915.87 24 x 6 L3024-6 1-4,111.66 24 x 8 L1024-8 1-3,977.88 24 x 8 L3024-8 1-4,406.55 24 x 10 L1024-10 1-4,153.65 24 x 10 L3024-10 1-4,569.02 24 x 12 L1024-12 1-4,229.53 24 x 12 L3024-12 1-4,652.48 24 x 15 L1024-15 1-4,395.29 24 x 15 L3024-15 1-4,834.82 24 x 18 L1024-18 1-6,082.45 24 x 18 L3024-18 1-6,690.70 24 x 21 L1024-21 1-6,580.31 24 x 21 L3024-21 1-7,238.34 24 x 24 L1024 1-8,085.52 24 x 24 L3024 1-8,894.07 27 x 4 L1027-4 1-4,225.07 27 x 4 L3027-4 1-4,436.32 27 x 6 L1027-6 1-4,250.35 27 x 6 L3027-6 1-4,462.87 27 x 8 L1027-8 1-4,852.01 27 x 8 L3027-8 1-5,203.06 27 x 10 L1027-10 1-5,103.16 27 x 10 L3027-10 1-5,358.32 27 x 12 L1027-12 1-5,580.19 27 x 12 L3027-12 1-6,138.21 27 x 15 L1027-15 1-6,299.47 27 x 15 L3027-15 1-6,929.42 27 x 18 L1027-18 1-6,455.02 27 x 18 L3027-18 1-7,100.52 27 x 21 L1027-21 1-6,648.35 27 x 21 L3027-21 1-7,420.97 27 x 24 L1027-24 1-8,225.86 27 x 24 L3027-24 1-8,637.15 27 x 27 L1027 1-8,458.53 27 x 27 L3027 1-9,008.24 30 x 4 L1030-4 1-5,429.38 30 x 4 L3030-4 1-5,700.85 30 x 6 L1030-6 1-5,461.93 30 x 6 L3030-6 1-5,735.03 30 x 8 L1030-8 1-6,234.97 30 x 8 L3030-8 1-6,686.12 30 x 10 L1030-10 1-6,557.75 30 x 10 L3030-10 1-6,885.64 30 x 12 L1030-12 1-7,170.83 30 x 12 L3030-12 1-7,887.91 30 x 15 L1030-15 1-8,095.08 30 x 15 L3030-15 1-8,904.59 30 x 18 L1030-18 1-8,295.09 30 x 18 L3030-18 1-9,124.60 30 x 21 L1030-21 1-8,543.49 30 x 21 L3030-21 1-9,536.31 30 x 24 L1030-24 1-10,570.67 30 x 24 L3030-24 1-11,099.20 30 x 27 L1030-27 1-10,869.52 30 x 27 L3030-27 1-11,576.08 30 x 30 L1030 1-13,586.95 30 x 30 L3030 1-14,470.08 36 x 4 L1036-4 1-7,221.07 36 x 4 L3036-4 1-7,582.12 36 x 6 L1036-6 1-7,264.37 36 x 6 L3036-6 1-7,627.59 36 x 8 L1036-8 1-8,349.00 36 x 8 L3036-8 1-8,766.45 36 x 10 L1036-10 1-8,721.81 36 x 10 L3036-10 1-9,157.90 36 x 12 L1036-12 1-9,537.19 36 x 12 L3036-12 1-10,014.05 36 x 15 L1036-15 1-10,766.45 36 x 15 L3036-15 1-11,304.77 36 x 18 L1036-18 1-11,032.47 36 x 18 L3036-18 1-11,584.09 36 x 21 L1036-21 1-11,919.75 36 x 21 L3036-21 1-12,515.74 36 x 24 L1036-24 1-14,059.00 36 x 24 L3036-24 1-14,761.95 36 x 27 L1036-27 1-14,469.30 36 x 27 L3036-27 1-15,192.77 36 x 30 L1036-30 1-19,227.09 36 x 30 L3036-30 1-20,188.44 36 x 36 L1036 1-25,572.04 36 x 36 L3036 1-26,850.64
www.stanroberts.com Straight Tee SxGxG Gasketed Sewer Fittings SDR35 45 Degree Wye SxGxG *4 x 4 G124 15-36.27 *4 x 4 G324 8-43.32 *6 x 4 G126-4 4 28 74.67 *6 x 4 G326-4 4 50 97.75 *6 x 6 G126 4-82.88 *6 x 6 G326 4 20 105.80 *8 x 4 G128-4 2-101.72 *8 x 4 G328-4 3 32 113.34 *8 x 6 G128-6 2 18 106.36 *8 x 6 G328-6 2 28 121.94 *8 x 8 G128 2-150.94 *8 x 8 G328 2 12 212.59 10 x 4 G12710-4 1-334.16 10 x 4 L3210-4 - - 350.41 10 x 6 G12710-6 1-354.68 10 x 6 L3210-6 - - 356.64 10 x 8 G12710-8 1-537.46 10 x 8 L3210-8 - - 564.25 10 x 10 G12710 1-551.74 10 x 10 L3210 - - 627.75 12 x 4 G12712-4 1-408.39 12 x 4 L3212-4 - - 447.82 12 x 6 G12712-6 1-430.42 12 x 6 L3212-6 - - 461.78 12 x 8 G12712-8 1-590.71 12 x 8 L3212-8 - - 689.84 12 x 10 G12712-10 1-692.61 12 x 10 L3212-10 - - 843.19 12 x 12 G12712 1-792.80 12 x 12 L3212 - - 877.82 15 x 4 L12715-4 1-662.99 15 x 4 L3215-4 - - 675.53 15 x 6 L12715-6 1-714.06 15 x 6 L3215-6 - - 809.08 15 x 8 L12715-8 1-768.78 15 x 8 L3215-8 - - 902.24 15 x 10 L12715-10 1-855.85 15 x 10 L3215-10 - - 1,084.30 15 x 12 L12715-12 1-1,009.93 15 x 12 L3215-12 - - 1,207.88 15 x 15 L12715 1-1,311.69 15 x 15 L3215 - - 1,525.18 18 x 4 L12718-4 1-1,673.14 18 x 4 L3218-4 - - 1,756.79 18 x 6 L12718-6 1-1,729.84 18 x 6 L3218-6 - - 1,816.33 18 x 8 L12718-8 1-1,807.31 18 x 8 L3218-8 - - 1,897.67 18 x 10 L12718-10 1-1,876.86 18 x 10 L3218-10 - - 1,970.70 18 x 12 L12718-12 1-1,928.17 18 x 12 L3218-12 - - 2,024.59 18 x 15 L12718-15 1-2,053.46 18 x 15 L3218-15 - - 2,102.70 18 x 18 L12718 1-2,168.49 18 x 18 L3218 - - 2,732.29 21 x 4 L12721-4 1-2,353.68 21 x 4 L3221-4 - - 2,499.32 21 x 6 L12721-6 1-2,524.83 21 x 6 L3221-6 - - 2,679.03 21 x 8 L12721-8 1-2,712.09 21 x 8 L3221-8 - - 3,021.35 21 x 10 L12721-10 1-2,914.09 21 x 10 L3221-10 - - 3,405.59 21 x 12 L12721-12 1-3,123.50 21 x 12 L3221-12 - - 3,683.13 21 x 15 L12721-15 1-3,486.25 21 x 15 L3221-15 - - 4,265.71 21 x 18 L12721-18 1-3,956.00 21 x 18 L3221-18 - - 5,023.27 21 x 21 L12721 1-5,243.63 21 x 21 L3221 - - 6,573.11 24 x 4 L12724-4 1-3,713.83 24 x 4 L3224-4 - - 3,899.52 24 x 6 L12724-6 1-4,503.25 24 x 6 L3224-6 - - 4,953.58 24 x 8 L12724-8 1-4,574.56 24 x 8 L3224-8 - - 5,067.53 24 x 10 L12724-10 1-4,776.72 24 x 10 L3224-10 - - 5,254.37 24 x 12 L12724-12 1-4,863.96 24 x 12 L3224-12 - - 5,350.35 24 x 15 L12724-15 1-5,054.58 24 x 15 L3224-15 - - 5,560.04 24 x 18 L12724-18 1-6,994.80 24 x 18 L3224-18 - - 7,694.31 24 x 21 L12724-21 1-7,567.36 24 x 21 L3224-21 - - 8,324.09 24 x 24 L12724 1-9,298.35 24 x 24 L3224 - - 10,228.18 27 x 4 L12727-4 1-4,858.83 27 x 4 L3227-4 - - 5,344.71 27 x 6 L12727-6 1-4,887.90 27 x 6 L3227-6 - - 5,376.69 27 x 8 L12727-8 1-5,579.81 27 x 8 L3227-8 - - 6,137.79 27 x 10 L12727-10 1-5,868.63 27 x 10 L3227-10 - - 6,455.49 27 x 12 L12727-12 1-6,417.22 27 x 12 L3227-12 - - 7,058.94 27 x 15 L12727-15 1-7,244.39 27 x 15 L3227-15 - - 7,968.83 27 x 18 L12727-18 1-7,423.27 27 x 18 L3227-18 - - 8,165.60 27 x 21 L12727-21 1-7,645.60 27 x 21 L3227-21 - - 8,534.12 27 x 24 L12727-24 1-9,459.74 27 x 24 L3227-24 - - 10,405.71 27 x 27 L12727 1-9,727.31 27 x 27 L3227 - - 10,700.04 30 x 4 L12730-4 1-6,243.79 30 x 4 L3230-4 - - 6,868.17 30 x 6 L12730-6 1-6,281.22 30 x 6 L3230-6 - - 6,909.34 30 x 8 L12730-8 1-7,170.22 30 x 8 L3230-8 - - 7,887.24 30 x 10 L12730-10 1-7,541.41 30 x 10 L3230-10 - - 8,295.55 30 x 12 L12730-12 1-8,246.46 30 x 12 L3230-12 - - 9,071.10 30 x 15 L12730-15 1-9,309.34 30 x 15 L3230-15 - - 10,240.28 30 x 18 L12730-18 1-9,539.35 30 x 18 L3230-18 - - 10,493.29 30 x 21 L12730-21 1-9,825.01 30 x 21 L3230-21 - - 10,966.76 30 x 24 L12730-24 1-12,156.27 30 x 24 L3230-24 - - 13,371.90 30 x 27 L12730-27 1-12,499.95 30 x 27 L3230-27 - - 13,749.95 30 x 30 L12730 1-15,624.99 30 x 30 L3230 - - 17,187.49 36 x 4 L12736-4 1-7,815.98 36 x 4 L3236-4 - - 8,719.44 36 x 6 L12736-6 1-8,166.44 36 x 6 L3236-6 - - 8,983.08 36 x 8 L12736-8 1-9,601.35 36 x 8 L3236-8 - - 10,561.49 36 x 10 L12736-10 1-9,723.02 36 x 10 L3236-10 - - 10,695.32 36 x 12 L12736-12 1-10,273.18 36 x 12 L3236-12 - - 11,516.16 36 x 15 L12736-15 1-11,198.93 36 x 15 L3236-15 - - 13,000.49 36 x 18 L12736-18 1-12,059.88 36 x 18 L3236-18 - - 13,321.70 36 x 21 L12736-21 1-13,707.71 36 x 21 L3236-21 - - 15,078.48 36 x 24 L12736-24 1-15,341.00 36 x 24 L3236-24 - - 17,642.15 36 x 27 L12736-27 1-16,639.70 36 x 27 L3236-27 - - 18,303.67 36 x 30 L12736-30 1-20,800.28 36 x 30 L3236-30 - - 23,216.71 36 x 36 L12736 1-26,000.35 36 x 36 L3236 - - 30,878.24 G *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC *Denotes Denotes Molded Assembled Fitting from Molded Items Components in Bold feature Heavy Duty Branches (SDR18) Denotes Additional Assembled Sizes Available from Upon Molded Request Components Specifications: Third party tested ASTM D3034, and listed F1336, by CSA, NSF B182.2 and UPC Non-Stock Additional items Sizes are non-cancelable, Available Upon non-returnable Request Page G2 Page G3
*Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC Denotes Assembled *Denotes from Molded Molded Components Fitting Items in Bold feature Heavy Duty Specifications: Branches (SDR18) ASTM D3034, Third F1336, party CSA tested B182.2 and listed by CSA, NSF and UPC Denotes Assembled from Molded Components Additional Sizes Available Upon Request Page G3 Additional Sizes Available Upon Request Non-Stock items are non-cancelable, non-returnable Page G4 Stan Roberts & Associates, Inc Houston - 800-392-6583 Dallas - 800-462-1195 Straight Tee with DWV Branch GxGxDWV G 45 Degree Wye with DWV Branch GxGxDWV G *8 x 4 H118-4 2 28 147.21 *8 x 4 H318-4 2 14 150.14 *8 x 6 H118-6 2 26 163.97 *8 x 6 H318-6 2 12 172.34 10 x 4 G1110-4 1-348.99 10 x 4 L3110-4 1-363.51 10 x 6 G1110-6 1-379.61 10 x 6 L3110-6 1-394.38 12 x 4 G1112-4 1-413.66 12 x 4 L3112-4 1-447.95 12 x 6 G1112-6 1-458.54 12 x 6 L3112-6 1-485.81 15 x 4 L1115-4 1-665.87 15 x 4 L3115-4 1-678.47 15 x 6 L1115-6 1-717.16 15 x 6 L3115-6 1-812.60 18 x 4 L1118-4 1-1,680.40 18 x 4 L3118-4 1-1,764.42 18 x 6 L1118-6 1-1,737.36 18 x 6 L3118-6 1-1,824.23 21 x 4 L1121-4 1-2,363.92 21 x 4 L3121-4 1-2,510.19 21 x 6 L1121-6 1-2,535.80 21 x 6 L3121-6 1-2,690.68 24 x 4 L1124-4 1-3,729.98 24 x 4 L3124-4 1-3,916.48 24 x 6 L1124-6 1-4,522.83 24 x 6 L3124-6 1-4,975.12 27 x 4 L1127-4 1-4,879.96 27 x 4 L3127-4 1-5,123.95 27 x 6 L1127-6 1-4,909.15 27 x 6 L3127-6 1-5,618.45 For fabricated Tees use L Prefix For fabricated Wyes use L Prefix Straight Tee with DWV Branch GxGxDWV H 45 Degree Wye with DWV Branch GxGxDWV H *8 x 4 G138-4 2 16 92.87 *8 x 4 G338-4 3 32 98.53 *8 x 6 H138-6 2 28 156.16 *8 x 6 H338-6 2 12 164.16 10 x 4 G1310-4 1-317.93 10 x 4 L3310-4 1-332.45 10 x 6 G1310-6 1-360.29 10 x 6 L3310-6 1-375.06 12 x 4 G1312-4 1-382.60 12 x 4 L3312-4 1-416.89 12 x 6 G1312-6 1-439.22 12 x 6 L3312-6 1-466.49 15 x 4 L1315-4 1-634.16 15 x 4 L3315-4 1-646.16 15 x 6 L1315-6 1-683.01 15 x 6 L3315-6 1-773.91 18 x 4 L1318-4 1-1,600.38 18 x 4 L3318-4 1-1,680.40 18 x 6 L1318-6 1-1,654.63 18 x 6 L3318-6 1-1,737.36 21 x 4 L1321-4 1-2,251.35 21 x 4 L3321-4 1-2,390.65 21 x 6 L1321-6 1-2,415.05 21 x 6 L3321-6 1-2,562.55 24 x 4 L1324-4 1-3,552.36 24 x 4 L3324-4 1-3,729.98 24 x 6 L1324-6 1-4,307.46 24 x 6 L3324-6 1-4,738.21 27 x 4 L1327-4 1-4,647.58 27 x 4 L3327-4 1-4,879.95 27 x 6 L1327-6 1-4,675.39 27 x 6 L3327-6 1-5,350.90 For fabricated Tees use L Prefix For fabricated Wyes use L Prefix Combo Wye & 1/8 Bend GxGxG (2 Piece) Double 45 Degree Wye GxGxGxG 4 x 4 G1654 1-52.21 4 x 4 L364-4 1-120.36 6 x 4 G1656-4 1 20 82.42 *6 x 4 G366-4 3 15 83.72 6 x 6 G1656 1 16 105.62 *6 x 6 G366-6 2 15 160.63 8 x 4 G1658-4 1 14 111.74 8 x 4 L368-4 1 12 173.87 8 x 6 G1658-6 1 10 144.18 8 x 6 L368-6 1 10 200.93 8 x 8 G1658 1 8 285.07 8 x 8 L368-8 1-380.03 10 x 4 G16510-4 1 10 338.43 10 x 4 L3610-4 1-498.95 10 x 6 G16510-6 1 8 387.79 10 x 6 L3610-6 1-516.65 10 x 8 G16510-8 1 8 595.21 10 x 8 L3610-8 1-741.62 10 x 10 G16510 1 4 808.44 10 x 10 L3610 1-810.88 12 x 4 G16512-4 1 8 417.01 12 x 4 L3612-4 1-631.12 12 x 6 G16512-6 1 6 444.42 12 x 6 L3612-6 1-663.10 12 x 8 G16512-8 1 5 699.86 12 x 8 L3612-8 1-906.53 12 x 10 G16512-10 1 4 995.78 12 x 10 L3612-10 1-1,063.16 12 x 12 G16512 1-1,132.12 12 x 12 L3612 1-1,144.98 15 x 4 L16515-4 1 4 672.85 15 x 4 L3615-4 1-933.21 15 x 6 L16515-6 1 4 744.22 15 x 6 L3615-6 1-1,063.80 15 x 8 L16515-8 1 4 884.55 15 x 8 L3615-8 1-1,115.85 15 x 10 L16515-10 1-1,205.44 15 x 10 L3615-10 1-1,367.16 15 x 12 L16515-12 1-1,419.13 15 x 12 L3615-12 1-1,575.50 15 x 15 L16515 1-2,158.22 15 x 15 L3615 1-2,055.67 18 x 4 L16518-4 1 3 1,550.47 18 x 4 L3618-4 1-1,985.93 18 x 6 L16518-6 1 2 1,617.57 18 x 6 L3618-6 1-2,132.22 18 x 8 L16518-8 1 2 1,750.14 18 x 8 L3618-8 1-2,310.21 21 x 4 L16521-4 1-2,196.15 21 x 4 L3621-4 1-2,825.32 21 x 6 L16521-6 1-2,367.74 21 x 6 L3621-6 1-3,144.95 21 x 8 L16521-8 1-2,874.84 21 x 8 L3621-8 1-3,678.16 24 x 4 L16524-4 1-3,618.08 24 x 4 L3624-4 1-4,408.16 24 x 6 L16524-6 1-4,345.61 24 x 6 L3624-6 1-5,815.07 24 x 8 L16524-8 1-4,506.54 24 x 8 L3624-8 1-6,169.17 27 x 4 L16527-4 1-4,460.99 27 x 4 L3627-4 1-5,767.22 27 x 6 L16527-6 1-4,577.18 27 x 6 L3627-6 1-6,024.88 27 x 8 L16527-8 1-5,303.05 27 x 8 L3627-8 1-7,284.28 30 x 4 L16530-4 1-5,732.52 30 x 4 L3630-4 1-7,411.11 30 x 6 L16530-6 1-5,881.93 30 x 6 L3630-6 1-7,742.29 30 x 8 L16530-8 1-6,786.11 30 x 8 L3630-8 1-9,360.57 36 x 4 L16536-4 1-7,604.95 36 x 4 L3636-4 1-9,856.76 36 x 6 L16536-6 1-7,665.74 36 x 6 L3636-6 1-10,297.25 36 x 8 L16536-8 1-8,866.44 36 x 8 L3636-8 1-12,273.03
www.stanroberts.com Sanitary Tee (T-Y) GxGxG Gasketed Sewer Fittings SDR35 G Sanitary Tee (T-Y) with DWV Branch GxGxDWV G *4 x 4 G156 10 32.80 8 x 4 H188-4 2 14 199.49 *6 x 4 G157-4 5 56 70.99 8 x 6 H188-6 2 10 246.05 *6 x 6 G157 2 24 82.78 10 x 4 L1810-4 1-406.06 *8 x 4 G158-4 3 30 93.80 10 x 6 L1810-6 1-465.34 *8 x 6 G158-6 2 30 111.86 12 x 4 L1812-4 1-500.41 *8 x 8 G158 2 12 254.52 12 x 6 L1812-6 1-533.30 10 x 4 L1510-4 1-338.38 15 x 4 L1815-4 1-807.42 10 x 6 L1510-6 1-387.78 15 x 6 L1815-6 1-1,027.34 10 x 8 L1510-8 1-595.21 18 x 4 L1818-4 1-1,839.80 10 x 10 L1510 1-789.27 18 x 6 L1818-6 1-1,999.55 12 x 4 L1512-4 1-417.01 21 x 4 L1821-4 1-2,751.42 12 x 6 L1512-6 1-444.42 21 x 6 L1821-6 1-2,949.26 12 x 8 L1512-8 1-658.62 24 x 4 L1824-4 1-4,341.70 12 x 10 L1512-10 1-975.57 24 x 6 L1824-6 1-5,453.24 12 x 12 L1512 1-1,102.68 27 x 4 L1827-4 1-5,883.83 15 x 4 L1515-4 1-672.85 27 x 6 L1827-6 1-5,919.36 15 x 6 L1515-6 1-744.45 15 x 8 L1515-8 1-827.71 18 x 4 L1518-4 1-1,611.66 Sanitary Tee (T-Y) with DWV Branch GxGxDWV H 18 x 6 L1518-6 1-1,666.29 *8 x 4 H198-4 2 15 148.00 18 x 8 L1518-8 1-1,740.91 *8 x 6 H198-6 2 14 169.88 21 x 4 L1521-4 1-2,292.85 10 x 4 L1910-4 1-372.22 21 x 6 L1521-6 1-2,457.72 10 x 6 L1910-6 1-426.56 21 x 8 L1521-8 1-2,874.84 12 x 4 L1912-4 1-458.71 24 x 4 L1524-4 1-3,618.08 12 x 6 L1912-6 1-488.86 24 x 6 L1524-6 1-4,544.37 15 x 4 L1915-4 1-740.14 24 x 8 L1524-8 1-4,648.91 15 x 6 L1915-6 1-818.90 27 x 4 L1527-4 1-4,903.19 18 x 4 L1918-4 1-1,772.83 27 x 6 L1527-6 1-4,932.80 18 x 6 L1918-6 1-1,832.92 27 x 8 L1527-8 1-5,489.23 21 x 4 L1921-4 1-2,522.14 30 x 4 L1530-4 1-6,014.40 21 x 6 L1921-6 1-2,703.49 30 x 6 L1530-6 1-6,050.46 24 x 4 L1924-4 1-3,979.89 30 x 8 L1530-8 1-7,999.14 24 x 6 L1924-6 1-4,998.81 36 x 4 L1536-4 1-8,047.11 27 x 4 L1927-4 1-5,393.51 36 x 6 L1536-6 1-9,248.61 27 x 6 L1927-6 1-5,426.08 36 x 8 L1536-8 1 - Sanitary Tee (T-Y) SxGxG Tee Cross GxGxGxG *4 x 4 G174 10-37.72 4 x 4 L1794 1-105.49 *6 x 4 G177-4 5-81.64 6 x 4 L1796-4 1-113.98 *6 x 6 G177 2-95.20 6 x 6 L1796 1-145.80 *8 x 4 G178-4 3 30 107.87 8 x 4 L1798-4 1-186.75 *8 x 6 G178-6 2 30 128.64 8 x 6 L1798-6 1-235.01 *8 x 8 G178 2-292.70 8 x 8 L1798 1-350.00 10 x 4 L1710-4 1-389.14 10 x 4 L17910-4 1-473.15 10 x 6 L1710-6 1-445.95 10 x 6 L17910-6 1-491.38 10 x 8 L1710-8 1-684.49 10 x 8 L17910-8 1-676.52 10 x 10 L1710 1-907.66 10 x 10 L17910 1-805.22 12 x 4 L1712-4 1-479.56 12 x 4 L17912-4 1-514.50 12 x 6 L1712-6 1-511.08 12 x 6 L17912-6 1-604.31 12 x 8 L1712-8 1-818.89 12 x 8 L17912-8 1-719.11 12 x 10 L1712-10 1-1,121.91 12 x 10 L17912-10 1-873.34 12 x 12 L1712 1-1,268.08 12 x 12 L17912 1-1,034.11 15 x 4 L1715-4 1-773.78 15 x 4 L17915-4 1-884.52 15 x 6 L1715-6 1-856.12 15 x 6 L17915-6 1-1,022.00 15 x 8 L1715-8 1-951.87 15 x 8 L17915-8 1-1,074.28 18 x 4 L1718-4 1-1,853.91 15 x 10 L17915-10 1-1,103.07 18 x 6 L1718-6 1-1,916.23 15 x 12 L17915-12 1-1,317.30 18 x 8 L1718-8 1-2,002.05 15 x 15 L17915 1-1,767.98 21 x 4 L1721-4 1-2,636.78 18 x 4 L17918-4 1-1,891.36 21 x 6 L1721-6 1-2,826.38 18 x 6 L17918-6 1-2,030.68 21 x 8 L1721-8 1-3,306.07 18 x 8 L17918-8 1-2,200.20 24 x 4 L1724-4 1-4,160.79 18 x 10 L17918-10 1-2,575.61 24 x 6 L1724-6 1-5,226.03 18 x 12 L17918-12 1-2,821.59 24 x 8 L1724-8 1-5,346.25 18 x 15 L17918-15 1-3,213.31 27 x 4 L1727-4 1-5,638.67 18 x 18 L17918 1-4,361.42 27 x 6 L1727-6 1-5,672.72 21 x 4 L17921-4 1-2,660.68 27 x 8 L1727-8 1-6,312.62 21 x 6 L17921-6 1-2,963.93 21 x 8 L17921-8 1-3,301.68 2-Way Cleanout GxGxG 24 x 4 L17924-4 1-4,198.25 *4 x 4 G1004 6-65.65 24 x 6 L17924-6 1-5,286.43 *6 x 6 G1006 3 21 372.77 24 x 8 L17924-8 1-5,569.03 27 x 4 L17927-4 1-5,492.59 27 x 6 L17927-6 1-5,737.97 27 x 8 L17927-8 1-6,792.81 *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC Denotes Assembled from Molded Components Specifications: ASTM D3034, F1336, CSA B182.2 Additional Sizes Available Upon Request Non-Stock items are non-cancelable, non-returnable *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Denotes Assembled from Molded Components Third party tested and listed by CSA, NSF and UPC Additional Sizes Available Upon Request Page G4 Page G5
Item Stan Roberts & Associates, Inc Houston - 800-392-6583 Dallas - 800-462-1195 Size in Item Size in 1/4 Bend (90) GxG 1/4 Bend (90) SxG *4 G204 10-21.45 *4 G224 12-19.72 *6 G206 4 48 39.45 *6 G226 4 50 41.70 *8 G208 2 14 109.11 *8 G228 2 14 112.60 *10 G2010 1 4 366.98 *10 G2210 1 10 385.33 *12 G2012 1 6 474.88 *12 G2212 1 6 498.62 1/4 Bend (90) GxG Long Sweep 1/4 Bend (90) SxG Long Sweep *4 G256 6-31.13 *4 G274 6-28.01 *6 G257 4 24 92.35 *6 G277 4 24 102.89 *8 G258 2 12 208.31 *8 G278 2 12 228.82 10 G2510 1 8 510.14 10 G2710 1 8 488.46 12 G2512 1 6 722.61 12 G2712 1 6 697.61 15 L18015 1-1,002.51 15 L18215 1-1,002.51 18 L18018 1-1,695.81 18 L18218 1-1,695.81 21 L18021 1-2,912.69 21 L18221 1-2,912.69 24 L18024 1-3,894.52 24 L18224 1-3,894.48 27 L18027 1-4,517.37 27 L18227 1-4,517.37 30 L18030 1-5,575.38 30 L18230 1-5,575.38 36 L18036 1-7,826.90 36 L18236 1-7,826.90 Deep Socket 1/4 Bend (90) GxG (2 Piece Assembly) Deep Socket 1/4 Bend (90) SxG (2 Piece Assembly) 4 H2566 1-222.65 4 H2744 1-222.65 6 H2577 1 18 247.95 6 H2777 1 18 247.95 8 H2588 1-425.97 8 H2788 1-425.97 1/8 Bend (45) GxG 1/8 Bend (45) SxG *4 G504 8 168 17.04 *4 G404 12 168 15.33 *6 G506 6 50 34.59 *6 G406 6 60 30.65 *8 G508 4 32 96.82 *8 G408 4 16 92.49 *10 G5010 1 12 251.26 *10 G4010 1 12 247.57 *12 G5012 1 7 364.85 *12 G4012 1 8 353.80 15 L5015 1-816.98 15 L4015 1-816.98 18 L5018 1-1,307.62 18 L4018 1-1,307.62 21 L5021 1-2,214.57 21 L4021 1-2,214.57 24 L5024 1-3,023.40 24 L4024 1-3,023.40 27 L5027 1-3,285.25 27 L4027 1-3,285.25 30 L5030 1-4,221.67 30 L4030 1-4,221.67 36 L5036 1-5,402.70 36 L4036 1-5,402.70 Deep Socket 1/8 Bend (45) GxG Deep Socket 1/8 Bend (45) SxG 4 H5044 1-110.80 4 H4044 1-110.80 *6 H5066 5 25 125.70 *6 H4066 5 25 125.70 8 H5088 1-245.18 8 H4088 1-245.18 1/8 Bend (45) GxG (Extra Long Sweep Radius) 1/8 Bend (45) SxG (Extra Long Sweep Radius) 4 L4804 1-158.63 4 L4904 1-158.63 6 L4806 1-225.17 6 L4906 1-225.17 8 L4808 1-701.53 8 L4908 1-701.53 10 L48010 1-1,122.47 10 L49010 1-1,122.47 12 L48012 1-2,104.61 12 L49012 1-2,104.61 15 L48015 1-2,630.79 15 L49015 1-2,630.79 1/12 Bend (30) GxG 1/12 Bend (30) SxG 4 L1354.30 1-43.94 4 L1344.30 1-43.94 6 L1356.30 1-60.65 6 L1346.30 1-60.65 8 L1358.30 1-97.75 8 L1348.30 1-97.75 10 L13510.30 1-267.39 10 L13410.30 1-267.39 12 L13512.30 1-348.69 12 L13412.30 1-348.69 15 L13515.30 1-922.24 15 L13415.30 1-922.24 18 L13518.30 1-1,347.89 18 L13418.30 1-1,347.89 21 L13521.30 1-1,912.70 21 L13421.30 1-1,912.70 24 L13524.30 1-2,754.09 24 L13424.30 1-2,754.09 27 L13527.30 1-3,285.38 27 L13427.30 1-3,285.38 30 L13530.30 1-4,221.67 30 L13430.30 1-4,221.67 36 L13536.30 1-5,402.70 36 L13436.30 1-5,402.70 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC Denotes Assembled *Denotes from Molded Molded Components Fitting Items in Bold feature Heavy Duty Specifications: Branches (SDR18) ASTM D3034, Third F1336, party CSA tested B182.2 and listed by CSA, NSF and UPC Page G5 Additional Sizes Available Denotes Upon Assembled Request from Molded Components Non-Stock items are non-cancelable, Additional non-returnable Sizes Available Upon Request Page G6
www.stanroberts.com Item Size in Gasketed Sewer Fittings SDR35 Item Size in 1/16 Bend (22.5) GxG 1/16 Bend (22.5) SxG *4 G1704 12-17.02 *4 G1714 15-16.19 *6 G1706 6 60 33.53 *6 G1716 6 60 31.83 *8 G1708 3 38 97.67 *8 G1718 4 38 102.07 *10 G17010 1 24 267.39 *10 G17110 1 24 260.08 *12 G17012 1 8 348.69 *12 G17112 1 8 341.32 15 L17015 1-922.24 15 L17115 1-922.24 18 L17018 1-1,347.89 18 L17118 1-1,347.89 21 L17021 1-1,912.75 21 L17121 1-1,912.75 24 L17024 1-2,754.09 24 L17124 1-2,754.05 27 L17027 1-3,285.38 27 L17127 1-3,285.38 30 L17030 1-4,221.82 30 L17130 1-4,221.82 36 L17036 1-5,402.70 36 L17136 1-5,402.70 Deep Socket 1/16 Bend (22.5) GxG Deep Socket 1/16 Bend (22.5) SxG G 4 H17044 1-110.80 4 H17144 1-110.80 *6 H17066 4 30 125.70 *6 H17166 5 30 125.70 8 H17088 1-245.18 8 H17188 1-245.18 1/16 Bend (22.5) GxG (Extra Long Sweep Radius) 1/16 Bend (22.5) SxG (Extra Long Sweep Radius) 4 L14904 1-158.63 4 L14904S 1-158.63 6 L14906 1-225.17 6 L14906S 1-225.17 8 L14908 1-701.53 8 L14908S 1-701.53 10 L14910 1-1,122.47 10 L14910S 1-1,122.47 12 L14912 1-2,104.61 12 L14912S 1-2,104.61 15 L14915 1-2,630.79 15 L14915S 1-2,630.79 1/32 Bend (11.25) GxG 1/32 Bend (11.25) SxG 4 L1934 1-43.94 4 L1834 1-43.94 6 L1936 1-60.65 6 L1836 1-60.65 8 L1938 1-97.75 8 L1838 1-97.75 10 L19310 1-267.39 10 L18310 1-267.39 12 L19312 1-348.69 12 L18312 1-348.69 15 L19315 1-922.24 15 L18315 1-922.24 18 L19318 1-1,347.89 18 L18318 1-1,347.89 21 L19321 1-1,912.70 21 L18321 1-1,912.70 24 L19324 1-2,754.09 24 L18324 1-2,754.09 27 L19327 1-3,285.38 27 L18327 1-3,285.38 30 L19330 1-4,221.67 30 L18330 1-4,221.67 36 L19336 1-5,402.70 36 L18336 1-5,402.70 Cap (G) Spigot Plug(S) *4 G1604 27-11.01 *4 G1164 24-8.30 *6 G1606 8 140 20.62 *6 G1166 15 168 12.73 *8 G1608 8 80 55.66 *8 G1168 8-45.16 *10 G16010 2 36 174.10 *10 G11610 2-150.44 *12 G16012 2 27 261.56 *12 G11612 2-179.80 15 L16015 1-423.00 15 L11615 1-353.84 18 L16018 1-614.95 18 L11618 1-498.21 21 L16021 1-1,333.90 21 L11621 1-985.45 24 L16024 1-1,540.46 24 L11624 1-1,481.82 27 L16027 1-1,942.90 27 L11627 1-1,811.85 30 L16030 1-2,496.70 30 L11630 1-3,239.52 36 L16036 1-4,271.10 36 L11636 1-4,145.75 Stop Coupling GxG Repair Coupling GxG *4 G604 16-21.06 *4 G624 16-21.06 *6 G606 4 60 42.05 *6 G626 4 60 42.05 *8 G608 4 38 71.42 *8 G628 4 38 71.42 *10 G6010 2 24 158.50 *10 G6210 2 24 158.50 *12 G6012 1 16 230.31 *12 G6212 1 16 230.31 15 L6015 1-476.50 15 L6215 1-476.50 18 L6018 1-927.57 18 L6218 1-927.57 21 L6021 1-1,580.80 21 L6221 1-1,580.80 24 L6024 1-2,302.88 24 L6224 1-2,302.88 27 L6027 1-2,596.95 27 L6227 1-2,596.95 30 L6030 1-3,337.20 30 L6230 1-3,337.20 36 L6036 1-4,271.60 36 L6236 1-4,271.60 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC *Denotes Denotes Molded Assembled Fitting from Molded Items Components in Bold feature Heavy Duty Branches (SDR18) Specifications: Third party tested ASTM D3034, and listed F1336, by CSA, NSF B182.2 and UPC Denotes Additional Assembled Sizes Available from Upon Molded Request Components Non-Stock Additional items Sizes are Available non-cancelable, Upon non-returnable Request Page G6 Page G7
Stan Roberts & Associates, Inc Houston - 800-392-6583 Dallas - 800-462-1195 Concentric Increaser Coupling GxG Concentric Increaser Bushing SxG *6 x 4 G606-4 8-60.44 *6 x 4 G1216 10-30.65 *8 x 4 G608-4 8-95.96 *8 x 4 G1219 5-83.72 *8 x 6 G608-6 4-100.76 *8 x 6 G1220 5-93.78 *10 x 4 G6010-4 2 36 221.15 *10 x 4 G1210-4 2 36 219.43 *10 x 6 G6010-6 2 36 261.97 *10 x 6 G1210-6 2 36 227.96 *10 x 8 G6010-8 2 36 304.01 *10 x 8 G1210-8 2 36 271.10 *12 x 4 G6012-4 2 27 321.99 *12 x 4 G1212-4 2 18 292.79 *12 x 6 G6012-6 2 27 340.56 *12 x 6 G1212-6 2 18 299.15 *12 x 8 G6012-8 2 27 394.51 *12 x 8 G1212-8 2 18 342.98 *12 x 10 G6012-10 2 18 455.50 *12 x 10 G1212-10 2 18 380.32 15 x 4 L6015-4 1-507.29 15 x 4 L1215-4 1-487.70 15 x 6 L6015-6 1-532.90 15 x 6 L1215-6 1-505.83 15 x 8 L6015-8 1-577.93 15 x 8 L1215-8 1-572.56 15 x 10 L6015-10 1-636.74 15 x 10 L1215-10 1-577.05 15 x 12 L6015-12 1-692.33 15 x 12 L1215-12 1-661.86 18 x 4 L6018-4 1-667.24 18 x 4 L1218-4 1-690.45 18 x 6 L6018-6 1-678.74 18 x 6 L1218-6 1-699.78 18 x 8 L6018-8 1-688.77 18 x 8 L1218-8 1-707.19 18 x 10 L6018-10 1-713.02 18 x 10 L1218-10 1-718.00 18 x 12 L6018-12 1-728.20 18 x 12 L1218-12 1-727.32 18 x 15 L6018-15 1-758.47 18 x 15 L1218-15 1-733.25 21 x 4 L6021-4 1-962.44 21 x 4 L1221-4 1-799.14 21 x 6 L6021-6 1-972.42 21 x 6 L1221-6 1-874.62 21 x 8 L6021-8 1-986.22 21 x 8 L1221-8 1-879.84 21 x 10 L6021-10 1-999.25 21 x 10 L1221-10 1-890.33 21 x 12 L6021-12 1-1,051.10 21 x 12 L1221-12 1-911.63 21 x 15 L6021-15 1-1,214.08 21 x 15 L1221-15 1-946.76 21 x 18 L6021-18 1-1,308.21 21 x 18 L1221-18 1-1,026.61 24 x 4 L6024-4 1-2,006.04 24 x 4 L1224-4 1-1,773.31 24 x 6 L6024-6 1-2,025.60 24 x 6 L1224-6 1-1,794.38 24 x 8 L6024-8 1-2,048.90 24 x 8 L1224-8 1-1,816.72 24 x 10 L6024-10 1-2,059.39 24 x 10 L1224-10 1-1,859.15 24 x 12 L6024-12 1-2,123.40 24 x 12 L1224-12 1-1,883.30 24 x 15 L6024-15 1-2,176.30 24 x 15 L1224-15 1-1,936.95 24 x 18 L6024-18 1-2,293.10 24 x 18 L1224-18 1-2,021.50 24 x 21 L6024-21 1-2,487.25 24 x 21 L1224-21 1-2,376.05 27 x 4 L6027-4 1-2,059.30 27 x 4 L1227-4 1-1,810.59 27 x 6 L6027-6 1-2,068.60 27 x 6 L1227-6 1-1,824.19 27 x 8 L6027-8 1-2,090.75 27 x 8 L1227-8 1-1,849.28 27 x 10 L6027-10 1-2,114.60 27 x 10 L1227-10 1-1,873.60 27 x 12 L6027-12 1-2,223.05 27 x 12 L1227-12 1-1,876.78 27 x 15 L6027-15 1-2,235.05 27 x 15 L1227-15 1-1,981.61 27 x 18 L6027-18 1-2,327.15 27 x 18 L1227-18 1-2,085.95 27 x 21 L6027-21 1-2,681.85 27 x 21 L1227-21 1-2,431.80 27 x 24 L6027-24 1-2,905.20 27 x 24 L1227-24 1-2,905.21 30 x 4 L6030-4 1-2,636.55 30 x 4 L1230-4 1-2,318.40 30 x 6 L6030-6 1-2,737.00 30 x 6 L1230-6 1-2,334.50 30 x 8 L6030-8 1-3,389.05 30 x 8 L1230-8 1-2,987.70 30 x 10 L6030-10 1-4,337.80 30 x 10 L1230-10 1-3,824.90 30 x 12 L6030-12 1-5,552.20 30 x 12 L1230-12 1-4,896.70 30 x 15 L6030-15 1-6,267.50 30 x 15 L1230-15 1-6,267.50 30 x 18 L6030-18 1-8,022.40 30 x 18 L1230-18 1-8,022.40 30 x 21 L6030-21 1-8,395.00 30 x 21 L1230-21 1-8,395.30 30 x 24 L6030-24 1-9,430.00 30 x 24 L1230-24 1-9,430.00 30 x 27 L6030-27 1-9,660.00 30 x 27 L1230-27 1-9,660.05 36 x 4 L6036-4 1-3,372.95 36 x 4 L1236-4 1-2,965.85 36 x 6 L6036-6 1-3,389.05 36 x 6 L1236-6 1-2,987.70 36 x 8 L6036-8 1-4,337.80 36 x 8 L1236-8 1-3,824.90 36 x 10 L6036-10 1-5,552.20 36 x 10 L1236-10 1-4,896.75 36 x 12 L6036-12 1-7,107.00 36 x 12 L1236-12 1-6,267.50 36 x 15 L6036-15 1-8,012.05 36 x 15 L1236-15 1-8,012.05 36 x 18 L6036-18 1-8,395.00 36 x 18 L1236-18 1-8,395.00 36 x 21 L6036-21 1-8,855.00 36 x 21 L1236-21 1-8,855.05 36 x 24 L6036-24 1-9,775.00 36 x 24 L1236-24 1-9,775.10 36 x 27 L6036-27 1-10,235.00 36 x 27 L1236-27 1-10,235.05 36 x 30 L6036-30 1-11,753.00 36 x 30 L1236-30 1-11,755.05 Controlled Settlement Joint GxG Controlled Settlement Joint SxG 4 x 4 H6004 1 15 125.04 4 x 4 H6304 1 20 121.29 6 x 6 H6006 1 16 169.82 6 x 6 H6306 1 7 164.76 8 x 8 H6008 1-290.85 8 x 8 H6308 1-282.13 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC Denotes Assembled from Molded Components Specifications: ASTM D3034, F1336, CSA B182.2 Denotes Assembled from Molded Components Additional Sizes Available Upon Request Page G7 Additional Sizes Available Upon Request Non-Stock items are non-cancelable, non-returnable Page G8
www.stanroberts.com Eccentric Increaser Coupling GxG Gasketed Sewer Fittings SDR35 Eccentric Increaser Bushing SxG *6 x 4 G616-4 12-63.46 *6 x 4 G1306-4 10-32.18 8 x 4 L618-4 5-100.76 *8 x 4 G1308-4 5-87.91 *8 x 6 G618-6 8-105.80 *8 x 6 G1308-6 8-98.47 10 x 4 L6110-4 1-232.21 10 x 4 L13010-4 1-230.40 10 x 6 L6110-6 1-275.07 10 x 6 L13010-6 1-239.36 10 x 8 L6110-8 1-319.21 10 x 8 L13010-8 1-284.66 12 x 4 L6112-4 1-338.02 12 x 4 L13012-4 1-307.43 12 x 6 L6112-6 1-357.59 12 x 6 L13012-6 1-314.11 12 x 8 L6112-8 1-414.24 12 x 8 L13012-8 1-360.13 12 x 10 L6112-10 1-478.28 12 x 10 L13012-10 1-399.34 15 x 4 L6115-4 1-532.65 15 x 4 L13015-4 1-512.09 15 x 6 L6115-6 1-559.55 15 x 6 L13015-6 1-531.12 15 x 8 L6115-8 1-606.85 15 x 8 L13015-8 1-601.19 15 x 10 L6115-10 1-668.55 15 x 10 L13015-10 1-605.90 15 x 12 L6115-12 1-726.95 15 x 12 L13015-12 1-694.95 18 x 4 L6118-4 1-700.60 18 x 4 L13018-4 1-724.97 18 x 6 L6118-6 1-712.65 18 x 6 L13018-6 1-734.77 18 x 8 L6118-8 1-723.20 18 x 8 L13018-8 1-742.55 18 x 10 L6118-10 1-748.70 18 x 10 L13018-10 1-753.06 18 x 12 L6118-12 1-764.65 18 x 12 L13018-12 1-763.69 18 x 15 L6118-15 1-796.40 18 x 15 L13018-15 1-769.91 21 x 4 L6121-4 1-1,010.55 21 x 4 L13021-4 1-839.10 21 x 6 L6121-6 1-1,021.05 21 x 6 L13021-6 1-918.35 21 x 8 L6121-8 1-1,035.55 21 x 8 L13021-8 1-923.83 21 x 10 L6121-10 1-1,049.25 21 x 10 L13021-10 1-934.85 21 x 12 L6121-12 1-1,103.65 21 x 12 L13021-12 1-957.21 21 x 15 L6121-15 1-1,274.80 21 x 15 L13021-15 1-994.10 21 x 18 L6121-18 1-1,373.60 21 x 18 L13021-18 1-1,077.94 24 x 4 L6124-4 1-2,106.35 24 x 4 L13024-4 1-1,861.98 24 x 6 L6124-6 1-2,126.85 24 x 6 L13024-6 1-1,884.10 24 x 8 L6124-8 1-2,151.35 24 x 8 L13024-8 1-1,907.56 24 x 10 L6124-10 1-2,162.35 24 x 10 L13024-10 1-1,952.11 24 x 12 L6124-12 1-2,229.55 24 x 12 L13024-12 1-1,977.47 24 x 15 L6124-15 1-2,285.10 24 x 15 L13024-15 1-2,033.78 24 x 18 L6124-18 1-2,407.75 24 x 18 L13024-18 1-2,122.57 24 x 21 L6124-21 1-2,611.65 24 x 21 L13024-21 1-2,494.82 27 x 4 L6127-4 1-2,162.25 27 x 4 L13027-4 1-1,901.12 27 x 6 L6127-6 1-2,172.05 27 x 6 L13027-6 1-1,915.40 27 x 8 L6127-8 1-2,195.30 27 x 8 L13027-8 1-1,941.74 27 x 10 L6127-10 1-2,220.35 27 x 10 L13027-10 1-1,967.28 27 x 12 L6127-12 1-2,334.15 27 x 12 L13027-12 1-1,970.62 27 x 15 L6127-15 1-2,346.80 27 x 15 L13027-15 1-2,080.69 27 x 18 L6127-18 1-2,443.45 27 x 18 L13027-18 1-2,190.25 27 x 21 L6127-21 1-2,815.95 27 x 21 L13027-21 1-2,553.40 27 x 24 L6127-24 1-3,050.45 27 x 24 L13027-24 1-3,050.47 Gasketed C900 Adapter Coupling GxG Gasket SDR26 Sewer Hub x Gasket C900 Hub Manhole Adapter without Pipe Stop SxG Sand Finish 4 x 4 H7204 1-100.01 4 x 4 L8904 1-33.87 6 x 6 H7206 1-120.37 6 x 6 L8906 1-63.85 8 x 8 H7208 1-387.20 8 x 8 L8908 1-71.27 10 x 10 H7210 1-474.35 10 x 10 L89010 1-129.58 12 x 12 H7212 1-568.23 12 x 12 L89012 1-190.00 15 x 15 H7215 1-1,515.92 15 x 15 L89015 1-243.21 18 x 18 H7218 1-1,812.60 18 x 18 L89018 1-489.16 21 x 21 H7221 1-2,401.15 21 x 21 L89021 1-691.60 24 x 24 H7224 1-2,566.79 24 x 24 L89024 1-1,151.73 27 x 27 L89027 1-1,337.57 30 x 30 L89030 1-1,898.88 36 x 36 L89036 1-2,614.67 Gasketed C900 Adapter Bushing SxG Chamfer SDR26 Sewer Spigot x Gasket C900 Hub Gasketed C900 Adapter Bushing SxG C900 DR25 Spigot x Gasket SDR26 Sewer Hub 4 x 4 H7404 1-98.56 4 x 4 H9004 1-96.16 6 x 6 H7406 1-118.63 6 x 6 H9006 1-115.74 8 x 8 H7408 1-381.62 8 x 8 H9008 1-372.31 10 x 10 H7410 1-467.51 10 x 10 H90010 1-456.11 12 x 12 H7412 1-560.03 12 x 12 H90012 1-546.37 15 x 15 H7415 1-1,493.18 15 x 15 H90015 1-1,456.82 18 x 18 H7418 1-1,786.45 18 x 18 H90018 1-1,742.88 21 x 21 H7421 1-2,365.13 21 x 21 H90021 1-2,307.54 24 x 24 H7424 1-2,529.77 24 x 24 H90024 1-2,468.07 G *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC *Denotes Denotes Molded Assembled Fitting from Molded Items Components in Bold feature Heavy Duty Branches (SDR18) Specifications: Third party tested ASTM D3034, and listed F1336, by CSA, NSF B182.2 and UPC Denotes Additional Assembled Sizes Available from Upon Molded Request Components Non-Stock Additional items Sizes are non-cancelable, Available Upon non-returnable Request Page G8 Page G9
Stan Roberts & Associates, Inc Houston - 800-392-6583 Dallas - 800-462-1195 Gasketed Sewer Adapter HxG Solvent Sewer Hub x Gasket Sewer Hub Gasketed Sewer Adapter SxG Solvent Sewer Spigot x Gasket Sewer Hub *4 x 4 G644 6-21.13 *4 x 4 G904 6-23.66 *6 x 4 G646-4 8-36.31 *6 x 6 G906 4-44.36 *6 x 6 G646 4-46.30 *8 x 8 G908 4-102.65 *8 x 8 G648 4-107.02 10 x 10 L9010 1-106.25 12 x 12 L9012 1-161.65 15 x 15 L9015 1-244.45 18 x 18 L9018 1-537.15 21 x 21 L9021 1-590.95 24 x 24 L9024 1-1,068.20 27 x 27 L9027 1-1,244.85 Gasketed DWV Adapter Coupling GxDWV G Gasket Sewer Hub x Gasket DWV Hub Gasketed DWV Adapter Bushing SxDWV G Chamfer Sewer Spigot x Gasket DWV Hub *4 x 4 H657 6-55.11 *4 x 4 H1213 6-51.04 *6 x 4 H658 4-73.93 *6 x 4 H1214 5-69.82 *6 x 6 H659 3-80.90 *6 x 6 H1215 4-76.76 8 x 8 H6508 1-193.14 8 x 8 H9208 1-188.31 10 x 10 H6510 1-267.29 10 x 10 H9210 1-260.62 12 x 12 H6512 1-393.49 12 x 12 H9212 1-383.65 Solvent Sewer to DWV Adapter Coupling HxDWV G Solvent Sewer Hub x Gasket DWV Hub Solvent Weld Sewer Adapter SxH Chamfer Sewer Spigot x Solvent Sewer Hub *4 x 4 H954 6-49.11 *4 x 4 G964 8-31.58 *6 x 4 H956-4 4-62.96 6 x 6 G966 1-39.02 *6 x 6 H956 4-74.87 8 x 8 G968 1-90.33 8 x 8 H958 1-180.19 10 x 10 H9510 1-306.74 12 x 12 H9512 1-448.87 Solvent DWV Adapter Bushing SxDWV H Chamfer Sewer Spigot x Solvent DWV Hub DWV Adapter Sleeve DWV SxSewer G DWV Spigot x Gasket Sewer Hub *4 x 4 G944 8-19.98 *4 x 4 G1208 16-38.12 *6 x 4 G946-4 5-45.52 *6 x 6 G1209 8-65.17 *6 x 6 G946 4-57.44 8 x 8 L12008 1-159.34 *8 x 8 G948 4-125.13 10 x 10 L12010 1-264.52 10 x 10 L9410 1-213.83 12 x 12 L12012 1-374.06 12 x 12 L9412 1-314.79 Temporary Plug Polyethylene (S) Vertical Riser Adapter SxS *4 G1184 36-7.26 *4 x 4 G984 9-36.31 *6 G1186 40-10.76 *6 x 6 G986 4-64.27 *8 G1188 8-25.54 *8 x 8 G988 4-140.89 In-Line Backwater Valve GxG IntelliCap with 3M Marker Terminal Backwater Valve (G) 4 L0104 1-210.45 4 L0204 1-179.85 6 L0106 1-454.48 6 L0206 1-271.40 8 L0108 1-1,492.54 8 L0208 1-429.01 10 L0110 1-1,879.96 10 L0210 1-496.26 12 L0112 1-2,512.34 12 L0212 1-537.95 IntelliDisc with 3M Marker *4 P1614-SN 14-69.00 *4 P1624-SN 20-57.50 *6 P1616-SN 10-86.25 *6 P1626-SN 10-71.88 Stainless Steel Clamp (QuickLock) Locator for 3M Marker 6 P5128 1-13.95 - P1634 1 - POR 8 P5188 1-19.21 Skirt Gasket for Saddle Tee Skirt Gasket for Saddle Wye 4 Inlet G5004 6-13.70 4 Inlet G5054 6-15.30 6 Inlet G5006 4-17.95 6 Inlet G5056 4-20.55 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC Denotes Assembled from Molded Components Specifications: ASTM D3034, F1336, CSA B182.2 Denotes Assembled from Molded Components Additional Sizes Available Upon Request Page G9 Additional Sizes Available Upon Request Non-Stock items are non-cancelable, non-returnable Page G10
www.stanroberts.com Saddle Tee with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet Gasketed Sewer Fittings SDR35 Saddle Wye with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet *6 x 4 G2106-4 5-60.59 *6 x 4 G2306-4 6-54.17 *8 x 4 G2108-4 6-76.18 *8 x 4 G2308-4 6-76.18 *8 x 6 G2108-6 3-87.18 *8 x 6 G2308-6 4-78.74 *10 x 4 G2110-4 5-134.62 *10 x 4 G2310-4 6-151.01 *10 x 6 G2110-6 6-160.67 *10 x 6 G2310-6 4-162.02 *12 x 4 G2112-4 5-166.98 *12 x 4 G2312-4 5-168.22 *12 x 6 G2112-6 4-187.71 *12 x 6 G2312-6 4-188.99 *15 x 4 G2115-4 5-176.49 *15 x 4 G2315-4 5-177.28 *15 x 6 G2115-6 4-189.31 *15 x 6 G2315-6 4-195.39 *18 x 4 G2118-4 5-311.11 *18 x 4 G2318-4 6-316.16 *18 x 6 G2118-6 3-342.76 *18 x 6 G2318-6 2-344.70 Saddle Tee with Stainless Steel Clamps Extended Solvent Skirt x Gasket Inlet Saddle Wye with Stainless Steel Clamps Extended Solvent Skirt x Gasket Inlet 6 x 4 L2106-4 1-48.48 6 x 4 L2306-4 1-43.53 8 x 4 L2108-4 4-60.90 8 x 4 L2308-4 1-60.90 8 x 6 L2108-6 3-69.75 8 x 6 L2308-6 2-63.01 10 x 4 L2110-4 1-107.66 10 x 4 L2310-4 3-120.77 10 x 6 L2110-6 4-128.55 10 x 6 L2310-6 1-129.61 10 x 8 L2110-8 1-215.67 10 x 8 L2310-8 1-281.67 12 x 4 L2112-4 3-133.55 12 x 4 L2312-4 1-134.60 12 x 6 L2112-6 2-150.17 12 x 6 L2312-6 4-151.17 12 x 8 L2112-8 1-248.89 12 x 8 L2312-8 1-396.67 12 x 10 L2112-10 1-313.32 12 x 10 L2312-10 1-476.45 15 x 4 L2115-4 1-141.19 15 x 4 L2315-4 1-141.84 15 x 6 L2115-6 1-151.40 15 x 6 L2315-6 1-156.30 15 x 8 L2115-8 1-297.37 15 x 8 L2315-8 1-483.97 15 x 10 L2115-10 1-336.25 15 x 10 L2315-10 1-546.69 15 x 12 L2115-12 1-503.36 15 x 12 L2315-12 1-667.07 18 x 4 L2118-4 1-248.89 18 x 4 L2318-4 1-252.92 18 x 6 L2118-6 1-274.19 18 x 6 L2318-6 1-275.78 18 x 8 L2118-8 1-354.87 18 x 8 L2318-8 1-541.45 18 x 10 L2118-10 1-393.75 18 x 10 L2318-10 1-604.18 18 x 12 L2118-12 1-562.89 18 x 12 L2318-12 1-724.66 18 x 15 L2118-15 1-614.50 18 x 15 L2318-15 1-778.23 21 x 4 L2121-4 1-259.04 21 x 4 L2321-4 1-262.64 21 x 6 L2121-6 1-285.17 21 x 6 L2321-6 1-286.81 21 x 8 L2121-8 1-369.06 21 x 8 L2321-8 1-563.11 21 x 10 L2121-10 1-409.50 21 x 10 L2321-10 1-628.35 21 x 12 L2121-12 1-585.41 21 x 12 L2321-12 1-753.65 21 x 15 L2121-15 1-639.08 21 x 15 L2321-15 1-809.36 21 x 18 L2121-18 1-912.56 21 x 18 L2321-18 1-976.44 24 x 4 L2124-4 1-269.40 24 x 4 L2324-4 1-273.15 24 x 6 L2124-6 1-296.57 24 x 6 L2324-6 1-298.28 24 x 8 L2124-8 1-383.82 24 x 8 L2324-8 1-585.63 24 x 10 L2124-10 1-425.88 24 x 10 L2324-10 1-653.48 24 x 12 L2124-12 1-608.82 24 x 12 L2324-12 1-783.80 24 x 15 L2124-15 1-664.64 24 x 15 L2324-15 1-841.73 24 x 18 L2124-18 1-958.79 24 x 18 L2324-18 1-1,015.50 24 x 21 L2124-21 1-1,079.34 24 x 21 L2324-21 1-1,154.89 27 x 4 L2127-4 1-282.87 27 x 4 L2327-4 1-286.81 27 x 6 L2127-6 1-311.41 27 x 6 L2327-6 1-313.19 27 x 8 L2127-8 1-403.02 27 x 8 L2327-8 1-614.91 27 x 10 L2127-10 1-447.17 27 x 10 L2327-10 1-686.15 27 x 12 L2127-12 1-639.26 27 x 12 L2327-12 1-822.99 27 x 15 L2127-15 1-697.88 27 x 15 L2327-15 1-883.82 27 x 18 L2127-18 1-1,006.73 27 x 18 L2327-18 1-1,066.28 27 x 21 L2127-21 1-1,133.31 27 x 21 L2327-21 1-1,201.09 27 x 24 L2127-24 1-1,332.92 27 x 24 L2327-24 1-1,381.25 30 x 4 L2130-4 1-351.16 30 x 4 L2330-4 1-359.94 30 x 6 L2130-6 1-377.95 30 x 6 L2330-6 1-387.99 Skirt Gasket included with 4 and 6 inlets Skirt Gasket included with 4 and 6 inlets Reducing Tee and Reducing T-Y Vertical Riser Kits Reducing 45 Degree Wye Vertical Riser Kit Reducing Tee Kits Reducing 45 Degree Wye Kits 8 x 4 HDB108-4 - - 478.10 8 x 4 HDB308-4 - - 510.99 8 x 6 HDB108-6 - - 618.51 8 x 6 HDB308-6 - - 670.51 Reducing T-Y Kits 8 x 4 HDB158-4 - - 485.53 8 x 6 HDB158-6 - - 631.58 G Complete job-site ready Vertical Riser Kits include every fitting needed from sewer main to lateral connection, all conveniently packaged and ready for installation. Complete job-site ready Vertical Riser Kits include every fitting needed from sewer main to lateral connection, all conveniently packaged and ready for installation. *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC *Denotes Denotes Molded Assembled Fitting from Molded Items Components in Bold feature Heavy Duty Branches (SDR18) Denotes Additional Assembled Sizes Available from Upon Molded Request Components Specifications: Third party tested ASTM D3034, and listed F1336, by CSA, NSF B182.2 and UPC Non-Stock Additional items Sizes are non-cancelable, Available Upon non-returnable Request Page G10 Page G11
Stan Roberts & Associates, Inc Houston - 800-392-6583 Dallas - 800-462-1195 Page G12 *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Denotes Assembled from Molded Components Third party tested and listed by CSA, NSF and UPC Additional Sizes Available Upon Request