Specifically designed for concrete basins and porous substrates Team@thermalspraysolutions.com
POLYX LINER is a modified thermoplastic copolymer sheet specifically for the use on concrete or other porous surfaces. Its purpose is to be resistant to everyday environmental stress cracking (ESC), as well as adverse weather conditions, chemical cleansers, salts and typical airborne pollutants and chemical degradation. Features: Eco Friendly PolyX Water repellent capabilities Provides a resilient and lasting coating system Dielectric insulation properties Excellent resistance to impact and abrasion
POLYX LINER Revolutionary Coating Solution For Porous Materials POLYX LINER system is primarily used for coating concrete surfaces, flooring, containers, pipes, tanks, discharge ducts, ceramic areas, and fiberglass bottoms. ECO friendly liner can be used in large walk-in refrigeration units or fresh water tanks. Non- toxic, safe for environment and workers.
Pump for glue adhesive Simple working single-phase feed Positioned POLYX LINER sheets are pressed with a to improve the application and remove blisters Extrusion system joins liner sheets by applying the same POLYX material. Welds are tear-resistant. Preparation of substrate Substrates must have stable dimensions and consistency, solid, flat, smooth and non-absorbent. Substrates need to be dry, free of rising damp or cracks, clean, with NO release agents or dust. Treat for absorbing concrete areas so sub-base is weather-proof using a twin-compound epoxy product. Application Glue is recommended to apply the POLYX LINER sheet to concrete. Welding the POLYX LINER plate is chosen according to type of project proposed on site. Mechanically through anchors or inserts.
POLYX LINER is available with several surface modifications: Standard smooth - Standard for most applications (Water tanks, basins, pools) Anti-slip - Industrial flooring, safety for employees (With seam joint) With Anchors- For anchoring in the concrete during installations of new walls With Metallic Support- Created to give anchoring in concrete extra stability Glow in the dark - for safety areas, markers, walk ways etc. (Not Pictured) Antibacterial- For food areas such as kitchens and freezers (Not Pictured) Liner Versions
POLYX LINER VS. LIQUID PAINTS Painting on concrete substrates does not ensure long-lasting protection in our experience due to: Application on un even substrate (concrete morphology, and chemically unstable) Difficult paint applications due to high humidity and air entrapment. Various thickness and uneven surfaces can cause peeling or entrapment. Painting will NOT allow gases and fluids to reach concrete surface, creating deterioration over time. Most of these issues weaken the concrete structure which cannot be immediately detected without a thorough investigation. Warehouse floor with corrosion from moisture and uneven substrate problems. POLYX LINER on roofing. No damage to the coating or humidity transfer after 1 year.
Substrate: Concrete tank POLYX LINER LONG TERM SUCCESS Galvanizing plant- Italy, 2002 Specifications: Acid resistant liner Results: First POLYX LINER still in excellent conditions after more than 10 years in operation today.
POLYX LINER Data Recommended liner thickness 2000-2500 um Abrasion Taber ASTM D4060/84 weight loss: 60 mg H18, weight: 500g, 1000 cycles Chemical resistance - Diluted acids 60 C Good - Diluted alkali 60 C Good - Salts (except peroxides) 60 C ** Good Resistance to weather conditions QUV ASTM G53-77 2000 hours - No significant change in color or loss of gloss. Florida 45 facing South 3 years - No significant change in color or loss of gloss. Burning characteristics Ignitability BS476: Pt5: 1979 P - not easily ignitable 500 u, coating Surface flame propagation BS476: Pt7: 1979 Class 1 500 u coating Flame propagation BS476: Pt6: 1989 I = 0.2 500 u coating Flammability UL94 V o (see also Material Properties) Safe working temperature (continuous in air) 60 C - 70 C max according to the version used *These values may vary from color to color and according to the copolymers used on the basis of the purpose of use. Storage: Store liner sheet in a dry area at room temperature.