Tennis Court Lighting Low Pole Lighting Solutions Advanced Lighting Technologies
Advanced Lighting Technologies (ADLT) is a high quality manufacturer and supplier of light ittings and lamps specialising in:» Flood, Area, Sports and Street Lighting» Industrial and Commercial Lighting» Canopy and Parking Lighting» Security and Amenity Lighting» LED lighting from BetaLED, by RUUD Lighting, a CREE company» Industrial, Food Industry, and Infrastructure Lighting ADLT and RUUD Luminaires are assembled and tested in our Melbourne production facility. ADLT is the distributor for VENTURE metal halide lamps. Advanced Lighting Technologies
High Performance Optimum Uniformity Precise Distribution Low Pole System Advantages Low pole tennis court lighting systems have many advantages over high pole alternatives. These include:» Reduced glare» Superior spill light control» Substantially longer lamp life, meaning greatly reduced maintenance costs» Ability to illuminate individual courts when the entire complex is not in use» Lower visual impact on the surrounding neighbourhood» Easier to access so no need for long reach cherry pickers to carry out lamp replacement and general maintenance By reducing glare and spill light, playing times may be extended as there is less impact on the surrounding community. Spill light restrictions are enforced by most local bodies and these aspects should be addressed at the commencement of the design process. Spill light is light shining beyond the sports facility that may annoy occupants of adjoining properties. RUUD Luminaires have sharp cut-off to overcome this problem. Our qualiied team is available to assist with your resource consent process.
Design Excellence Successful tennis court lighting begins with good design. The main factors to be considered in the design process are:» Quantity of light» Quality of light The quantity of light is expressed as an average lux level and is usually determined by the level of tennis to be played. General guidelines recommend lower levels for recreational play, medium levels for club standard and high levels for international or professional grade. Australian and New Zealand standards recommend the following average maintained lux levels for the various levels of play.» Recreational and Residential 250 lux» Club Competition and Commercial 350 lux» International and National 1000 lux The quality of light is evaluated by the degree of light uniformity and lack of glare. Optimum uniformity is achieved by using light ittings that provide the correct light distribution and that are positioned appropriately around the perimeter of the court. Glare is kept to a minimum by utilising light ittings with precise cut-off distribution. For optimum design, a product has to offer more than reliability, performance and value. It must also become part of the environment, deliver minimal environmental impact and be energy eficient. Our range of products can be tailored to meet your budget and application constraints. With our qualiied staff we are able to assist with your total lighting solution.
Typical Layouts The following lighting layouts are of a typical nature. Please contact our customer services team for an optimised design to meet your speciic lighting and location requirements. Single Courts Cost effective single court lighting solutions for recreational or competition level. Description Level of Play No. of Poles Pole Height No. of Fittings Lamp Wattage Area Cut-off AC1499 Recreational and Residential 4 6m 4 1000W MH Aerodome AVV406875 Club Competition and Commercial 4 7.6m 4 875W PSMH Area Cut-off AC Aerodome AVV4 Twin Courts Two ways to effectively light your twin court layout for club level tennis. Description Level of Play No. of Poles Pole Height No. of Fittings Lamp Wattage Cut-off Flood CF3499 Club Competition and Commercial 4 7.6m 8 1000W MH Aerodome AVV406875 Club Competition and Commercial 6 7.6m 8 875W PSMH Cut-off Flood CF Aerodome AVV4
Triple Courts Description Level of Play No. of Poles Pole Height No. of Fittings Lamp Wattage Aerodome AVV406875 Club Competition and Commercial 6 7.6m 6 875W PSMH Aerodome AVV306875 Club Competition and Commercial 6 7.6m 8 875W PSMH Aerodome AVV4 Aerodome AVV3 Quad Courts Description Level of Play No. of Poles Pole Height No. of Fittings Lamp Wattage Aerodome AVV406875 Club Competition and Commercial 6 7.6m 6 875W PSMH Aerodome AVV306875 Club Competition and Commercial 9 7.6m 12 875W PSMH Aerodome AVV4 Aerodome AVV3
AC SERIES Area Cut-off The Area Cut-off AC Series is an ideal cost effective solution for stand alone tennis courts. This forward throw relector has a main beam 60 degrees from vertical providing wide lateral distribution and excellent uniformities. The itting is mounted horizontally (lat glass) for glare control and an internal backlight shield is available as an accessory to provide sharp cut-off behind the pole. CF SERIES Cut-off Flood The Cut-off Flood CF Series is an ideal cost effective solution for multi-court applications. The CF Series is a forward throw light itting with an optical system speciically designed to assure maximum main beam projection while minimising spill light. It is generally tilted to a maximum of 20 degrees above horizontal to reduce glare and obtain optimum performance.
AVV SERIES Aerodome The Aerodome AVV Series is a stylish itting suitable for single and multi-court applications. The vertical mounted lamp delivers a signiicantly longer life and higher output.
Steel Poles Sourcing your light ixture and poles from Advanced Lighting Technologies means your club or client need only deal with the one supplier for your tennis court lighting requirements. Advanced Lighting Technologies recommends RUUD Lighting poles for their Area Cut-off and Aerodome light ixtures. The identiication of the right pole is a necessary step in the choice of RUUD Lighting products. Advanced Lighting Technologies supply RUUD square section premium base plate poles complete with in-ground reinforcing cages and anchor bolts. Our square poles are available with a series of cross-arms and mounting brackets for complete mounting lexibility. The DeltaGuard process offers outstanding performance, endurability and colour retention. Beneits For Premium Poles Exclusive Colourfast DeltaGuard Finish DeltaGuard is our exclusive on-site total inishing system that ensures pole and ixture colour are an exact match while providing unmatched protection against the elements. The DeltaGuard process offers outstanding performance endurability and colour retention in addition to:» Ultraviolet Light Resistance» Abrasion Resistance» Superior Adhesion»Corrosion Resistance» Chemical Resistance High-Quality Materials Our poles are manufactured using the highest quality of steel so you never have to worry about the integrity of your project.
Premium square steel poles offer the ultimate in strength and reliability. These non-tapered poles are available in 6 metre lengths for private residential use, or 7.6 metre for club level competition. RUUD poles feature our Crown-Weld pole base combined with steel pole base cover and pole cap, with matching DeltaGuard inish to match the ixture. Our reinforced premium square steel poles ill the need for a strength in tough wind conditions. Consult your Advanced Lighting Technologies representative for advice on pole requirements in your particular location. Premium steel poles include a Crown-Weld pole base that is much stronger than traditional designs. Crown-Weld has four formed triangle sections and increased weld surface area that provides a dramatic improvement in pole fatigue resistance and yield strength and features a 50% higher EPA* value. * EPA (Effective Projected Area) is a rating assigned to pole-mounted lighting ixtures based on the ixture or pole s surface area and shape. The EPA is used to calculate wind loading to determine the proper pole size needed to support a ixture in outdoor applications. EPA maps indicate approximate maximum wind zones. Consult your Advanced Lighting Technologies representative for further advice. Premium Pole Features» Crown-Weld pole base featuring 50% higher EPA value» Colourfast DeltaGuard inish with 7-year warranty» EXACT pole to ixture inish colour match» Steel pole base cover and pole cap with matching Colourfast DeltaGuard inish» Poles ship with ixtures» Masonite bolt template» Comes complete with hand hole cover, pole base cover and anchor bolt cage
COLOURFAST DELTAGUARD Our Exclusive Finishing System Quality products deserve a quality inish with the only 7-year warranty in the industry. Colourfast DeltaGuard guaranties a inish that will be free from material cracking, peeling, excessive fading or corrosion defects under normal use and service for seven years.
Colourfast DeltaGuard Topcoat The baked-on, ultra-durable powder top coat is key to a durable and colourfast inish. The DeltaGuard process offers unmatched performance in durability and colour retention and delivers:» Ultraviolet light resistance» Corrosion resistance» Hard surfacing» Chemical resistance» Superior adhesion» Excellent colour retention Available Finishes Our Total Finishing System Includes:» Meticulous cleaning that removes all surface contaminants» Pretreatment that chemically etches the metal surface for superior paint adhesion» Electro-deposited epoxy primer that provides unmatched corrosion resistance» Baked-on, ultra-durable topcoat that offers superior protection against UV radiation» Computerized control and quality assurance system» ISO 9001-2000 Quality Standard registration» Use of environmentally safe materials throughout the inishing process BRONZE BLACK* WHITE SILVER * Standard inish nb* non-standard inishes have extended production and shipment time of 16 weeks or more. Consult ADLT for availability. DeltaGuard Exposure Comparison The same 3mm thickness of powder was applied to each of these two pole section samples. Each was scored and exposed to a salt-fog test for 2,500 hours. RUUD Pole with DeltaGuard inish Standard Pole
Venture Lamps & Control Gear RUUD HID Lighting Fixtures Powered by Venture. The RUUD range of tennis court lighting distributed by Advanced Lighting Technologies use only quality Venture lamps. As we are ever more reminded of the need to conserve energy worldwide to protect our planet for future generations, Venture Lighting are striving to manufacture more energy eficient lighting systems. Venture Lighting is leading the way in developing lighting energy eficient products to reduce overall energy usage costs throughout the world but without compromising on lighting quality. Our metal halide lighting systems are widely regarded as the most advanced available offering more light than conventional systems, excellent colour uniformity, longer life and signiicant energy savings. Making the most of Venture s highly eficient lighting technology can result in signiicant beneits in terms of restoring our overall environment to a greener and cleaner world for us to enjoy.
Ordering Information Fixture Product Code Product Description Optical System Lamp Manufacturer Lamp Code AC1499 - * # AC Series, Area Cut-off, Close Pole Mount, 1000W MH Area Cut-off Venture 15332 CF3499 - * # CF Series, Cut-off Flood, Adjustable Fitter, 1000W MH Cut-off Venture 72051 AVV406875 - * # Aerodome, Vertical Forward Throw, Close Pole Mount, 875W MH PS Type IV - Area Cut-off Venture 22619 AVV306875 - * # Aerodome, Vertical Parking Roadway, Close Pole Mount, 875W MH PS Type III - Parking Roadway Venture 22619 Pole Product Code Product Description PS4S20CT - # PS Series, 6.0m, 100 x 100 Square, 3mm Wall, Base Plate Pole PS4S25CT - # PS Series, 7.6m, 100 x 100 Square, 3mm Wall, Base Plate Pole PS4S25ST - # PS Series, 7.6m, 100 x 100 Square, 5mm Wall, Base Plate Pole T = Consult ADLT for Tenon and Mount options Sufix * # 50Hz, 230V 53 50Hz, 240V 54 Colour Black BK Colour Silver SV Colour Platinum Bronze PB Colour White WH
Advanced Lighting Technologies Advanced Lighting Technologies Australia Inc 110 Lewis Road Wantirna South, Victoria AUSTRALIA 3152 T T : +61 : 03 039800 5600 F: F: +61 03 039800 5533 E: E: sales@adlt.com.au www.adlt.com.au www.venturelighting.com.au Advanced Lighting Technologies New Zealand Ltd Unit 8, 8, 25 25 Airborne Road Albany, Auckland NEW ZEALAND 0632 T: T: +64 09 09415 6332 F: F: +64 09 09415 6255 E: E: light@adlt.co.nz www.adlt.co.nz www.venturelighting.co.nz Advanced Lighting Technologies Asia Pte Ltd Block 4008, Ang Mo Mo Kio Kio Avenue 10 10 #04-06, Techplace I I SINGAPORE 569625 T T : +65 : 6844 2338 F: F: +65 6844 2339 E: E: sales@adlt.com.sg www.adlt.com.sg www.venturelighting.com.sg