Installation Guide Vector AUTOSAR Solution MICROSAR 3.x Introduction Delivery Overview Installation Update Version 6.8.0
Installation Guide Vector AUTOSAR Solution MICROSAR 3.x Content 1 Introduction 3 1.1 General Information 3 1.2 Reference Documents 4 2 Delivery Overview 5 3 Installation 6 3.1 STEP 1 Decrypt, Unpack and Install MICROSAR SIP 6 3.1.1 To Decrypt and Unpack Your MICROSAR SIP 6 3.1.2 To Install Your CBDxxx MICROSAR SIP 6 3.1.3 To Decrypt, Unpack and Install GENy (optional) 7 3.2 STEP 2 Install DaVinci Tools 8 3.2.1 To Install and Activate Your DaVinci Configurator Pro (Optional) 8 3.2.2 To Install and Activate Your DaVinci Developer (Optional) 8 3.3 STEP 3 Check if Additional SIP-specific Tool Exists 8 4 Update 9 4.1 Update From Internet 9 4.2 Update From FTP 9 4.3 To Update Your DaVinci Developer (Optional) 9 4.4 To Update Your DaVinci Configurator (Optional) 9 4.5 To Update Your Persistors (Optional) 9 4.5.1 To Update Your GENy Framework (Optional) 10 5 Additional Information 11 5.1 System Requirements 11 5.2 Integrate and update MCAL 12 5.3 Additional Tools, recommended by Vector 12 5.3.1 CANoe 12 5.3.2 Visual Studio 2013 12 5.4 Frequently Asked Question 12 6 Contact 14 Vector Informatik GmbH Version 6.8.0-2-
1 Introduction Installation Guide Vector AUTOSAR Solution MICROSAR 3.x 1 Introduction 1.1 General Information This document gives you a short overview about the first steps after you receive your Vector AUTOSAR Solution delivery and how to update. Which Vector release is used? See Additional Information on page 11. Administrator rights are required! Make sure, that you have administrator rights; some setups need them for tool installation! Delivery Description Delivery on E- mail/ftp (Only MICROSAR SIP delivery) The setups are stored as a self decrypting PGPs executable (*.sda) on the Vector FTP server. You have received two E-mails from Vector containing all necessary links and passphrases to download and decrypt the delivery. Delivery on CD The setups are stored on CD (1 CD/tool). The SIP delivery CD includes a link to the FTP server and the necessary passphrases to download and decrypt the latest GENy Framework setup. How to go on now? Decrypt and unpack your MICROSAR SIP delivery* Install MICROSAR SIP Vector Informatik GmbH Version 6.8.0-3-
1 Introduction Installation Guide Vector AUTOSAR Solution MICROSAR 3.x Download, decrypt and unpack GENy Framework* Install GENy Framework * Only necessary for setups from FTP server Some SIPs have additional SIP-specific Installation Guides. Have a look at section STEP 3 Check if Additional SIP-specific Tool Exists on page 8. Have you additionally purchased AUTOSAR DaVinci tools? Install and activate DaVinci tools (DaVinci Developer and DaVinci Configurator Pro) 1.2 Reference Documents No. Title and Description [1] DocumentationGuide_VectorAUTOSAR.pdf Get an overview of all delivered documents, their content and where they are located. [2] Readme.txt Find details about tool version and installation in the Readme.txt files beside each tool setup. [3] LicenseManagerHelp.pdf Get details about the tool activation via Vector License Manager in the LicenseManagerHelp.pdf located at your tool installation directory Vector License Manager Vector License Manager Help or start help directly from License Manager via Help Contents. [4] Startup_<OEM>_<Product>.pdf Get information about the implementation of the Vector AUTOSAR Solution for a specific OEM. You will find this document in the Doc\UserManuals folder of your MICROSAR SIP. [5] TechnicalReference_ExternalDependenciesOfGenerators.pdf Get information about external tool dependencies of standalone generators [6] Startup_Vector_AUTOSAR_Solution.pdf Get information about first steps working with the Vector AUTOSAR Solution. You will find this document in the Doc folder of the MICROSAR SIP installation. [7] Releases_MICROSAR_BSW_<OEM>.pdf Get an overview of the changes which have been made on the MICROSAR Basic Software Modules (BSW) between the last three releases. Vector Informatik GmbH Version 6.8.0-4-
2 Delivery Overview Installation Guide Vector AUTOSAR Solution MICROSAR 3.x 2 Delivery Overview The following figure gives a complete overview of the setups and where they can be installed from. The steps are described in detail in the following chapter. Vector Informatik GmbH Version 6.8.0-5-
3 Installation Installation Guide Vector AUTOSAR Solution MICROSAR 3.x 3 Installation This section describes the SIP and tool installation and activation. Cross Reference Before starting tool installation see System Requirements (Additional Information on page 11). 3.1 STEP 1 Decrypt, Unpack and Install MICROSAR SIP Caution - SIP installation on network is not supported! The included programs (e.g. dataserver, InitialEcucGenerator,...) do not work correctly on network, this could lead to errors. Select local path for SIP installation location. MCALs are not longer part of the MICROSAR SIP delivery (exception: Vector is MCAL reseller ). For detailed information about MCAL handling, see section Additional Information on page 11. 3.1.1 To Decrypt and Unpack Your MICROSAR SIP 1. Open the link to the FTP server and save <CBDxxx>_<Dyy>_PGP-sda.exe to your computer. 2. Start <CBDxxx>_<Dyy>_PGP-sda.exe and enter the passphrase (password from 2. e-mail) to unpack. 3.1.2 To Install Your CBDxxx MICROSAR SIP The MICROSAR SIP setup includes the DataServer and DaVinci Project Assistant. Start Vector MICROSAR SIP CBDxxx <Hw> <Comp> Setup.exe and follow the installation hints. The installed SIP files are automatically stored to C:\Vector\CBDxxx folder. Vector Informatik GmbH Version 6.8.0-6-
3 Installation Installation Guide Vector AUTOSAR Solution MICROSAR 3.x Launch Persistor Setup (recommended) The MICROSAR SIP Setup contains the Persistor setup. During the installation process you will be asked whether to Launch Persistor setup (recommended). This installation is necessary for diagnostic purposes, contains import filters for different CANdelaStudio versions and installs necessary C++ runtimes. When you select this installation, the CANdela Converter Addon setup window will open. Just follow the installation dialog. After MICROSAR SIP Installation you can find necessary links based on your CBD number in your start menu. Doc Use this link to look up for documents which are included in the SIP. MICROSAR BSW Sources Use this link to open your SIP folder. New ECU Project After tool installation you can use this link to open DaVinci Project Assistant with already assigned SIP. 3.1.3 To Decrypt, Unpack and Install GENy (optional) Install the latest GENy AUTOSAR framework (GENyAsrFramework_<version>-PGP-sda.exe) from the FTP server. 1. Download GENy Framework setup from ftp://ftp.vector.com/user/bswframeworks/davinci/. 2. Start *-PGP-sda.exe and enter passphrase to decrypt the setup file. The passphrase is send separately via email. 3. Start the decrypted setup file *.exe and follow the installation hints. Vector Informatik GmbH Version 6.8.0-7-
3 Installation Installation Guide Vector AUTOSAR Solution MICROSAR 3.x The GENy Framework setup includes the DataServer and DaVinci Project Assistant. 3.2 STEP 2 Install DaVinci Tools DaVinci tools are delivered before your MICROSAR SIP delivery. If you have already installed the AUTOSAR tools, skip this chapter and go on with the Startup Document [6]. 3.2.1 To Install and Activate Your DaVinci Configurator Pro (Optional) 1. Start the setup.exe of the DaVinci Configurator Pro delivery and follow the installation hints. 2. Activate your license via Vector License Manager. For more Information about product activation have a look at the LicenseManagerHelp.pdf [3]. 3.2.2 To Install and Activate Your DaVinci Developer (Optional) This section is only necessary if you use a RTE and if you have purchased the DaVinci Developer. The Developer is delivered before your MICROSAR SIP delivery. If you have already installed and activated the DaVinci Developer, skip this section. 1. Start the setup.exe of the DaVinci Developer delivery and follow the installation hints. 2. Activate your license via Vector License Manager. For more Information about product activation have a look at the LicenseManagerHelp.pdf [3]. 3.3 STEP 3 Check if Additional SIP-specific Tool Exists Dependent on your SIP, the delivery contains additional tools. 1. Open the Doc folder of the new installed SIP 2. Check if InstallationGuide_<SIP-specific Tool>.pdf exists 3. If the document exits go on with this document and install the SIP-specific tool Vector Informatik GmbH Version 6.8.0-8-
4 Update Installation Guide Vector AUTOSAR Solution MICROSAR 3.x 4 Update We recommend to always use the latest version of Vector tools. Please note that DaVinci Developer and MICROSAR RTE are closely related so that only compatible versions can be used together. Check the allowed combinations here: www.vector.com/rte_davinci Which RTE Version is used? See Which MICROSAR RTE Version is used on page 13. 4.1 Update From Internet You get the update from the Download-Center on https://vector.com/. 4.2 Update From FTP You get the update from the FTP server. It is the same step as described for installation. 4.3 To Update Your DaVinci Developer (Optional) Download the latest service pack of DaVinci Developer from www.vector.com. 1. Open www.vector.com and browse to the Download-Center 2. Download the new service pack of the DaVinci Developer. 3. Start the setup.exe to update the DaVinci Developer on your computer. 4.4 To Update Your DaVinci Configurator (Optional) Download the latest setup of the DaVinci Configurator from www.vector.com. 1. Open www.vector.com and browse to the Download-Center 2. Download the new setup of the DaVinci Configurator. 3. Start the setup.exe to update the DaVinci Configurator on your computer. 4.5 To Update Your Persistors (Optional) Download the latest versions of Persistors from www.vector.com. Vector Informatik GmbH Version 6.8.0-9-
4 Update Installation Guide Vector AUTOSAR Solution MICROSAR 3.x A Persistor update is necessary if you update your CANdelaStudio. 4.5.1 To Update Your GENy Framework (Optional) Download the latest version of GENy Framework from FTP server (see delivery link). Cross Reference Information about tool version can be found in ReadmeInstall_x_y_z.txt in the folder of the GENy setup file. Vector Informatik GmbH Version 6.8.0-10-
5 Additional Information Installation Guide Vector AUTOSAR Solution MICROSAR 3.x 5 Additional Information 5.1 System Requirements Check the general system requirements of the respective tools here: DaVinci Configurator Pro https://vector.com/vi_davinci_configurator_en.html DaVinci Developer https://vector.com/vi_davinci_developer_en.html CANoe http://vector.com/vi_canoe_en.html Vector Informatik GmbH Version 6.8.0-11-
5 Additional Information Installation Guide Vector AUTOSAR Solution MICROSAR 3.x Additional system requirements (for standalone generators, e.g. MicrosarGen.exe) are listed in [5]. 5.2 Integrate and update MCAL For new deliveries, MCALs are not longer part of the MICROSAR SIP delivery (exception: Vector is MCAL reseller ). Now you have to order the necessary MCALs directely from the Hardware Manufacturer. The MICROSAR SIP includes a script, which will include the MCAL. You can find the Script_MCAL_Prepare.bat within the following path: ThirdParty\<MCAL_µC>\VectorIntegration\. Cross Reference For detailed information see TechnicalReference_3rdParty-MCAL-Integration.pdf. (This document is only available in deliveries without MCAL) If you want to update your MCAL, you have to execute the Script_MCAL_Prepare.bat once again. 5.3 Additional Tools, recommended by Vector 5.3.1 CANoe If you use vvirtualtarget, Vector recommend CANoe as test tool. If you have licensed CANoe, the following Installation steps are necessary: 1. Download the last CANalyzer / CANoe Service Pack from Vector Download-Center http://vector.- com/vi_downloadcenter_en.html 2. Unpack the downloaded zip file CANalyzerCANoe_xx_SPyy.zip 3. Start CANwin_xx_SPyy.exe and follow the installation hints. 4. Activate your license via Vector License Manager. For more Information about product activation have a look at the LicenseManagerHelp.pdf Introduciton on page 4 5.3.2 Visual Studio 2013 Download and install Microsoft Visual Studio 2013 from the official Microsoft website. 5.4 Frequently Asked Question Vector Informatik GmbH Version 6.8.0-12-
5 Additional Information Installation Guide Vector AUTOSAR Solution MICROSAR 3.x Which MICROSAR RTE Version is used You can find the used MICRSOAR RTE Version in the Delivery Description of the delivered Vector MICROSAR SIP (SIP Version). The DeliveryDescription_ CBDxxxxxxx.html is stored at the Doc/DeliveryInformation folder of the installed Vector MICROSAR SIP. Open DeliveryDescription_<CBDxxx>.html and search for DaVinci_Rte in the Component Version Information section. Vector Informatik GmbH Version 6.8.0-13-
6 Contact Installation Guide Vector AUTOSAR Solution MICROSAR 3.x 6 Contact Visit our website for more information on News Products Demo software Support Training data Addresses www.vector.com Vector Informatik GmbH Version 6.8.0-14-