Secret Server Installation Windows Server 2008 R2

Transcription

1 Table of Contents Introduction... 2 ASP.NET Website... 2 SQL Server Database... 2 Administrative Access... 2 Prerequisites... 2 System Requirements Overview... 2 Additional Recommendations... 3 Beginning the Installation Process... 3 Installing IIS... 3.NET Framework... 3 Microsoft SQL Server... 3 Secret Server Installer... 8 Download the latest version of Secret Server... 8 Running the Installer... 8 Completing Secret Server installation from website... 9 Manual Installation (no setup.exe) Installing as a Virtual Directory Installing as a Website Configuring the Application Pool Appendix Microsoft SQL Server Express Prerequisites Virtual Accounts SSL Certificate Installing IIS Manually Installing the.net Framework Manually Additional step if.net was installed before IIS Last updated: July 12, 2016 Page 1

2 Introduction This is the installation guide for Windows Server 2008 R2, Windows 7, and Windows Vista. For other operating system installation guides, click here. ASP.NET WEBSITE Secret Server is installed as an ASP.NET website. The setup.exe file will set up the website with the correct permissions and create the settings in IIS. Once the website is set up, the installation will be completed by a 5-step process within the application itself. SQL SERVER DATABASE Secret Server requires an instance of SQL Server for the database backend. The SQL Server database will require a SQL account with db_owner permission to complete the installation. ADMINISTRATIVE ACCESS Throughout the installation, you will be required to be an administrator to perform most of these actions. Please ensure that you are logged onto your system with a Windows account that has administrative rights. Prerequisites Important: If this is the first time you are installing Secret Server, please take the time to review the full list of system requirements and recommendations, located HERE. Please note that Secret Server version 8.8 will be the last version to support Windows Server However, you can still use Windows Server 2008 R2. If you wish to upgrade to a version higher than Secret Server 8.8, you will need to upgrade your server to Windows Server 2008 R2 or higher. SYSTEM REQUIREMENTS OVERVIEW 1. One of the following operating systems: Windows Server 2008 R2 Microsoft Windows Vista Ultimate, or Windows Vista Business 1 Microsoft Windows 7 Ultimate, or Windows 7 Professional 1 2. Microsoft SQL Server 2005 or greater (any edition) 1 Windows Vista/7 is only supported for testing environments. Microsoft does not support either of these operating systems as a production environment. Page 2

3 3. Microsoft Internet Information Services (IIS) 4. Microsoft.NET Framework 4.5.1, 4.5.2, or 4.6 (32-bit or 64-bit) ADDITIONAL RECOMMENDATIONS 1. Use an SSL certificate for Secret Server. 2. Run Microsoft Update on your server to make sure all components are up to date. BEGINNING THE INSTALLATION PROCESS Components should be installed in the following order: 1. Internet Information Services (IIS) 2..NET Framework 3. SQL Server 4. Secret Server INSTALLING IIS IIS is an internal part of the Windows operating system, and just needs to be enabled. If IIS is not found, the Secret Server installer will install it manually. If you would prefer to install IIS manually, please refer to the instructions in the Appendix..NET FRAMEWORK If.NET Framework is not found, the Secret Server installer will install it automatically. If you would prefer to install.net manually, please refer to the instructions in the Appendix. In the event that the.net Framework has been installed before IIS, there are some additional steps you may be required to take to configure ASP.NET so the application can work. For more details, see the Additional step section in the Appendix. MICROSOFT SQL SERVER Installing Microsoft SQL Server We recommend using Microsoft SQL Server 2008, 2014, or An edition called Microsoft SQL Server Express is available to download for free. When downloading the file, select the filename ending in WT, which means with tools and will include SQL Server Management Studio. Note If you are using SQL Server 2008, SQL Server 2008 SP1 must be installed immediately after the SQL Server 2008 installation is complete to resolve compatibility issues with Windows 7 and Windows Server 2008 R2. Page 3

4 Note SQL Server 2008/2012 Express have some prerequisites that must be installed first. Please see our appendix for required software for Microsoft SQL Server 2008 Express or Microsoft SQL Server 2012 Express. The instructions given below are for Microsoft SQL Server 2012 Express Edition with Tools. The installation processes for other editions such as Enterprise or Standard may be similar, but not the same: 1. Download the SQL Server installation package, right-click it, and select Run as Administrator. 2. From the welcome screen, select Installation from the left menu. 3. Select New SQL Server stand-alone installation or add features to an existing installation. 4. SQL Server will then initialize your installation. 5. After you accept the license terms, you can click Next to install product updates. 6. In the Feature Selection window, ensure that the Database Engine Services and Management Tools Basic check boxes are selected. Click Next. Page 4

5 7. In the Instance Configuration window, the default setting is to use a named instance called SQLEXPRESS. If you prefer to use the default instance or specify a custom name for the named instance, make those changes here. Otherwise, click Next to continue with the default settings. 8. In the Server Configuration window, you have the option to specify a different service account to run SQL Server Database Engine. Otherwise, click Next to use the default settings. 9. In the Database Engine Configuration window, you have the choice to select either Windows authentication mode or Mixed Mode. Select the option that will work best for your environment. See descriptions below: a. Mixed Mode (recommended for easiest configuration) Mixed Mode is required if you intend on using a SQL Server account to authenticate Secret Server to your SQL Server instance. If you are doing an evaluation and using the Secret Server setup.exe installer, we recommend using Mixed Mode with a SQL authentication account. Selecting this option will also require you to set a password for the SQL Server system administrator (sa) account. See Adding a SQL Server User (below) for instructions. b. Windows Mode (recommended for best security) This will prevent SQL Server account authentication and requires a Windows Service account to run the Secret Server website. This will also require additional configuration in IIS once Secret Server is installed. This KB article walks through the advanced setup. Page 5

6 10. Your user account should already be shown in the Specify SQL Server administrators box. If not, click Add Current User, and then click Next. 11. Allow the installation to complete, and then click Close. SQL Server 2012 Express is now installed. Creating the SQL Server Database The Secret Server installer will create the database for you if it does not exist and if the user account has permission to create a new database (this requires the dbcreator server role). To create a database manually through SQL Server Management Studio, use the following steps: 1. Open SQL Server Management Studio by searching for it from the Windows Start screen. 2. Connect to your SQL Server instance. 3. Right click the Databases folder and select New Database 4. Enter a name for your database in the Database name field, and then click OK. Page 6

7 Adding a SQL Server User Use the following instructions to add a SQL Server account for Secret Server to use to access the SQL database: 1. Open SQL Server Management Studio by searching for it from the Windows Start screen. 2. Connect to your SQL Server Database. 3. Expand the Security folder. 4. Right-click the Logins folder and select New Login 5. Select a method of authentication: a. SQL Server authentication Use this option to create a new SQL Server account (this requires Mixed Mode to be enabled). To create the account, enter a new username and password and then deselect the Enforce password policy check box to prevent the account from expiring. b. Windows authentication Use this option to add access to SQL Server for an existing Windows account. To add the account, enter the login name or click Search to find the account. It is recommended to use a domain account rather than a local Windows account. When using Windows authentication for SQL Server, you will also need to configure your application pool in IIS to be run by this account. Note If you plan to use SQL Mirroring, using Windows authentication is recommended. Page 7

8 6. Click User Mapping in the left menu. 7. Select the check box next to your Secret Server database. 8. In the Database role membership window below, select the db_owner check box. 9. Click OK. Secret Server Installer Note Ensure you have SQL Server installed before attempting to set up Secret Server. DOWNLOAD THE LATEST VERSION OF SECRET SERVER The latest version of Secret Server is available for download. A setup.exe file will be downloaded to your machine. RUNNING THE INSTALLER It is recommended to run the setup.exe file as an administrator. Prerequisites The installer will first check the system to determine whether there are any missing prerequisites and will install the needed features if necessary. These prerequisites include.net 3.5,.NET 4.5.1, and IIS. Alternatively, you can choose to enable these features manually before running the installer. Installation Type Your first option during the setup will be to choose a Standard or Advanced installation: Page 8

9 Standard Installation This option installs Secret Server as a virtual directory under the Default Web Site in IIS. This is recommended if you have existing sites using the Default Web Site and it is also the fastest way to get Secret Server up and running. Advanced Installation This option installs Secret Server as a new website in IIS without using the Default Web Site. This option also allows you to specify a port number that the website will run under. Using this option assumes some knowledge of IIS and is often followed up by adding a DNS entry for the new website on the domain controller. This option must be used if there is no Default Web Site in IIS. File Destination This is the location where the application files will exist. The folder is typically C:\SecretServer or C:\inetpub\wwwroot\SecretServer (legacy), but can be customized to follow your convention. Application Name The application name will be used when creating the application pool and either the website or virtual directory in IIS, depending on the option selected above. Completing Installation from Secret Server Once the setup.exe installer completes, the website will be set up with the correct permissions. Click Continue, and the browser will open to allow you to complete the Secret Server installation from the webpage. The following section will guide you through this process. Completing Secret Server installation from website Secret Server is now ready to complete installation. If the setup.exe did not open the browser automatically, open a browser and navigate to where your Secret Server is located, for example: From here, Secret Server has a 5-step installation process: 1. Step one ensures that Secret Server has write access to its location. If required, you must give the correct account write and modify permissions to the application folder to continue. Once the permissions are set, click Next. Note (Advanced) If you don t want to change the permissions of a folder, you can give Secret Server Windows credentials for an account that has the appropriate folder permissions, and Secret Server will impersonate as that user during the installation process. Page 9

10 Note Secret Server only needs write permission to the directory containing the application files during installation and upgrade. You can remove the write and modify permissions once the installation process is complete. 2. Step two creates your unique encryption key. This key is generated securely and used to encrypt and decrypt values stored in the database. Alternatively, Secret Server can be configured to use a SafeNet HSM (or paired HSMs for failover). Use of HSM encryption requires an HSM card to be installed on the same server as Secret Server. To configure Secret Server to use an HSM, click the Advanced link, and then click the encryption option Use Safenet HSM for Encryption. Use of HSM encryption requires Secret Server Enterprise Plus Edition. 3. Step 3 is where you specify the database. If Secret Server is installed on the same machine as SQL Server, you can specify (local). If you are using a named instance of SQL, specify a slash then the instance name, for instance: (local)\instancename. Enter the SQL username and password if using SQL Server Authentication, or select Windows Authentication. For information about adding a SQL Server user, see Adding a SQL Server User. Note If the database name you provide does not yet exist in the specified instance of SQL Server, Secret Server will attempt to create the database using the SQL or Windows account you have specified. For that account to create a database, it will need to have the dbcreator server role in SQL Server. 4. Secret Server will now attempt to download and install the latest version from the internet. You must have an active internet connection. If you do not, Secret Server will continue to install the current version. 5. Secret Server will ask you to agree to your End User License Agreement. If you do, select the check box and click continue. Secret Server will then configure your database. 6. Secret Server will now ask you to create your first user. This user will have administrative access within the application. 7. Once logged into Secret Server, you will be prompted with the Getting Started Wizard. If you skipped the wizard and would like to return, you can go to HELP > Getting Started from the top menu. The wizard will guide you through adding your licenses, setting up an server, and creating your first group. Secret Server has now successfully been installed. See Getting Started and the User Guide for information about using Secret Server. Page 10

11 Manual Installation (no setup.exe) If you are knowledgeable of IIS and would prefer to manually install the website without using the setup.exe installer, you can follow these instructions. Note Make sure you have the required software installed before attempting to set up Secret Server. Download the latest version of Secret Server. After clicking the download button you will be taken to a page where you can choose to download a.zip file that contains the Secret Server files. Use this.zip file for the instructions below. Secret Server can be installed in a few different ways: As a virtual directory As a website INSTALLING AS A VIRTUAL DIRECTORY 1. Extract the contents of the.zip file where you would like Secret Server to be located on your system (a common location is C:\inetpub\wwwroot). 2. Open Internet Information Services (IIS) Manager. 3. Right-click Default Web Site and select Add Virtual Directory 4. Select an alias for your Secret Server. The alias is what will be appended to the website. For instance, 5. Select the physical directory for where you unzipped Secret Server. 6. In the tree, right-click the new virtual directory and select Convert to Application. Page 11

12 7. Create a new application pool. 8. Right-click your Secret Server virtual directory in IIS and select Manage Application > Advanced Settings 9. In the new window, change the Application Pool to the one you created in step 7. Click OK. 10. Ensure that the Secret Server folder has the proper permissions by checking that the account running the application pool in IIS has Modify permissions on the folder where Secret Server is installed. Secret Server is now ready to be installed. Go to Completing Secret Server installation from website. INSTALLING AS A WEBSITE 1. Extract the contents of the.zip file where you would like Secret Server to be located on your system (a common location is C:\inetpub\wwwroot). 2. Open Internet Information Services (IIS) Manager. 3. Create a new application pool. Page 12

13 4. Ensure that the account running your newly created application pool in IIS has Modify permissions on the folder where Secret Server is installed. 5. In IIS, right-click Sites and select Add Website 6. Enter a Site name. 7. Click Select and choose the application pool you created in step 3 from the drop-down menu. Click OK. 8. Click the button beside the Physical path field and select the directory containing the unzipped Secret Server files (for example, C:\inetpub\wwwroot\secretserver). Click OK. 9. Click OK at the bottom of the Add Website window to save your settings. Secret Server is now ready to be installed. Go to Completing Secret Server installation from website. CONFIGURING THE APPLICATION POOL During a manual installation, Secret Server may be placed in the DefaultAppPool application pool, which may not be set to use the correct pipeline for Secret Server. Secret Server requires that the application pool s managed pipeline mode be set to Classic. To resolve this, you can modify the existing application pool settings or create a new one. Note It is recommended that you create a new application pool for Secret Server if you have other web applications running on the same server. This will help avoid changing the configuration for another application. Changing the Pipeline Mode You can modify the pipeline mode for Secret Server s application pool using the following instructions: 1. Open Internet Information Services (IIS) Manager and select the Application Pools node. 2. Double-click the DefaultAppPool (or the application pool you wish to change). 3. For the Managed Pipeline Mode, select Classic. Click OK. Creating a New Application Pool Follow the steps below to create an entirely new application pool to use for Secret Server: 1. Open Internet Information Services (IIS) Manager and right-click the Application Pools node. 2. Select Add Application Pool 3. Enter a new name for your application pool in the Name field. 4. Ensure that the.net Framework Version is set to.net Framework v For the Managed Pipeline Mode select Classic. Click OK. 6. (Optional) configure the application pool identity. Page 13

14 Configuring an Application Pool Identity Windows 7/Server 2008 R2 will default new application pool identities to a virtual identity, ApplicationPoolIdentity. For easiest configuration, use either this or NETWORK SERVICE as the identity. For better security, you can specify your own Windows service account. See the Appendix for further information on using a virtual identity for Secret Server in IIS. To configure an application pool identity, follow the steps below: 1. Open Internet Information Services (IIS) Manager. 2. Click the Application Pools node. 3. Right-click the application pool you would like to modify and select Advanced Settings 4. Under the Process Model section, click the Identity field to select a Built-in account or specify a Custom account. For more information about using a custom account, see Running Secret Server IIS Application Pool with a Service Account. After you ve selected an account, click OK. Appendix MICROSOFT SQL SERVER EXPRESS PREREQUISITES SQL Server 2008 Express requires some software to be installed before it can be installed. Note Only the Express Edition requires these components to be installed separately. If you are installing another edition of SQL such as Standard or Enterprise, these components will be installed for you. Windows PowerShell 1.0. Microsoft.NET Framework 3.5 SP1 is required for Microsoft SQL Server 2008 Express Edition Windows Installer 4.5: Get Windows Installer 4.5 Note Microsoft SQL Server 2012 Express Edition requires Microsoft.NET Framework 4.0. Installing PowerShell Windows Vista Simply download and run the installer that you can download here: Get PowerShell 1.0 Windows 7 Windows 7 includes PowerShell 2.0. There is no need to install anything. Windows Server 2008 / Windows Server 2008 R2 1. Open Server Manager. 2. Select Features on the left. Page 14

15 3. Select Add Features. 4. Check Windows PowerShell. 5. Click Next. 6. Click Install. VIRTUAL ACCOUNTS Virtual Accounts, or Managed Service Accounts, is a feature included in Windows 7 and Windows Server Windows will create a virtual account for the name of the application pool. Thus, if your application pool s name is DefaultAppPool and its identity is set to ApplicationPoolIdentity, you would assign folder permissions to the account IIS AppPool\DefaultAppPool. This account can then optionally be used to connect Secret Server to the SQL database by adding db_owner access to the database as a Windows account. See Adding a SQL Server User. For more information on virtual accounts as application pool identities, see this article by Microsoft. SSL CERTIFICATE What is an SSL Certificate? An SSL (Secure Sockets Layer) certificate greatly enhances the security between the user s browser and the server Secret Server is installed on. It encrypts all data between the server and the client s browser so if an attacker were to look at the data being transmitted between the two, they would not be able to decipher it. Where can I obtain an SSL Certificate? A certificate can be obtained from various companies such as Thawte or VeriSign. It is also possible to create your own, see Creating and installing your own. INSTALLING IIS MANUALLY IIS is an internal part of the Microsoft Windows operating system. Installing it will vary depending on which version of the operating system you are using. Windows Vista / Windows 7 Please ensure you have your Windows installation disk available if the system asks for it. This disk should have been included with the System Manufacturer or the Administrator that installed Windows on that machine. 1. Start by clicking the Start Menu, then Control Panel. 2. Open the Programs and Features Control Panel item. 3. On the left pane, click Turn Windows Features on or off. 4. A dialog like this should appear. It may take a moment or two for the system to load. Page 15

16 5. Expanding Internet Information Services > World Wide Web Services > Application Development Features and checking ASP.NET will also check other needed dependencies. 6. Expand Common Http Features and check the following: a. Static Content (if this is not checked, images will not appear) b. Default Document 7. Click OK. At this point, Windows will now install IIS. It may ask you for your operating system s disk. Page 16

17 8. At this point, IIS is now installed. Depending on your operating system, Windows may ask you to restart your computer. You can verify the installation of IIS by opening the Control Panel, clicking Administrative Tools, and an icon in there should now appear called Internet Information Services. We recommend you run Windows Update to get the latest security patches for IIS once you have IIS installed. Windows Server 2008 / Windows Server 2008 R2 To install Internet Information Services on Windows Server 2008 or Windows Server 2008 R2, you will give your server the Web Server (IIS) role. 1. Begin by opening the Server Manager and selecting Roles. 2. Click Add Roles. 3. Select the Web Server (IIS) role. Page 17

18 4. Click Next. 5. Selecting the Web Server (IIS) role will automatically select all of the features needed to run this role. When the dialog appears, select Add Required Features. 6. When asked for the services of the Role you want to enable, select ASP.NET under Application Development. Page 18

19 7. Checking ASP.NET will prompt you to automatically check other role services needed to run ASP.NET. Select Add Required Role Services to continue. Page 19

20 8. Also ensure that Static Content, Default Document, and HTTP Errors are selected under Common HTTP Features. 9. Click Next. 10. After confirming your installation, the installation will begin. 11. Finally once the installation is complete, a summary dialog will appear. 12. Click Close. Your server is now configured to run Secret Server. Page 20

21 INSTALLING THE.NET FRAMEWORK MANUALLY For operating systems other than Windows 8.1 or Windows Server 2012 R2,.NET Framework is not included by default. To install version 4.5.1, use the offline installer provided by Microsoft, found HERE. After installing.net Framework 4.5.1, open IIS manager by running the command inetmgr from RUN. Click the server name on the left panel, then open ISAPI and CGI restrictions. You will notice that ASP.NET v is set to Not Allowed. Right-click it and choose Allow. ADDITIONAL STEP IF.NET WAS INSTALLED BEFORE IIS With manual IIS/.NET installations, we recommend installing IIS before you install ASP.NET. However, if the.net Framework was already installed before IIS was, there are some additional steps required to configure ASP.NET in IIS. You must register ASP.NET in IIS. This step is only necessary if you installed the.net Framework before IIS. This step is not necessary if the Secret Server Installer is utilized to install IIS and.net Begin by clicking Start > Run, then type in cmd.exe and click OK. Page 21

22 2. At the command prompt, type cd %WINDIR%\Microsoft.NET\Framework\v and press enter. Note If you are using the x64 Edition of Windows and the.net Framework, you should use: cd %WINDIR%\Microsoft.NET\Framework64\v Then at the command prompt, type aspnet_regiis.exe -iru and press enter. The ASP.NET registration into IIS will then begin. After a few moments, ASP.NET will be registered in IIS. 4. ASP.NET is now correctly registered. Note This command requires elevated privileges. You can resolve this by opening the start menu, finding the Command Prompt, right-clicking, and selecting Run as Administrator. Running it without administrative privileges will result in the error An error has occurred: 0x Unspecified error. Page 22