MultiGrid Pipe Clamps Pipe Support Standard Details Being first is good, being smart is better, being both is Simply the Best! 1
PRODUCT PORTFOLIO Oglaend System offer a broad range of cable support systems for all applications, e.g. cabie Iadders, cable trays, junction box racks, tubing clamps, cable cleats, heating cables, control systems etc. If you need further information, please do not hesitate to contact us! Company presentation Download our latest version of product catalogues from: www.oglaend-system.com 2
www.ogland-system.no Contents: Subject to minor changes without notice. Check our website for latest issues Short Codes - Pipe Support Functions: RS = Rest HD = Hold Down LG = Line Guide PG (LS) = Pipe Grounding (Line Stop) Function: (Clamped Shoe only) RS Function: (With added details) RS, HD & LG Function: (With added details) RS, HD, LG & PG Note: All-in-one-function can be written as LA (= Line Anchor) Example function: OPS-SD PC01 (U-Strap Non-Grip) is RS, HD, LG Standard Gap for all functions exept RS is normally between 1,5-3mm Description Standard Details Short Codes: Oglaend Pipe Support Standard Details O P S S D OPS-SD XXXX Examples: OPS-SD AD01 = Adapter, Type No.01 OPS-SD LG01 = Line Guide, Type No.01 OPS-SD PG01 = Pipe Grounding, Type No.01 OPS-SD MI01 = Miscellaneous, Type No.01 OPS-SD PS01 = Pipe Shoe, Type No.01 OPS-SD PC01 = Pipe Clamp, Type No.01 Mekano Channels Product portfolio 2 Contents and Short Codes for Pipe Support Functions 3 Introduction 4 Overview Standard Details for 1/2-2 6 Overview Standard Details for 2-8 8 OPS-SD AD01 Adapter U-Bolt /U-Strap to Mekano 10 OPS-SD LG01 Line Guide for Pipe Shoe /MultiGrid 12 OPS-SD LG05 Line Guide for Pipe Shoe /MultiGrid 14 OPS-SD PG01 Line Stop for Pipe Shoe /MultiGrid 16 OPS-SD MI01 Low friction Insulation Pad (PTFE) 18 OPS-SD MI02 Low friction Insulation Pad (PTFE) 20 OPS-SD PC01 U-Strap for 2-8 (Non-Grip) 22 OPS-SD PC02 U-Strap for 2-8 (Grip) 23 OPS-SD PC03 U-Bolt for ½ 2 pipe (Non-Grip) 24 OPS-SD PC04 U-Bolt for ½ 2 pipe (Grip) 25 OPS-SD PC05 U-Bolt for ½ 2 pipe Vibro-Dampening (Grip) 26 OPS-SD PC06 U-Bolt for ½ 2 pipe Vibro-Dampening (Non-Grip) 27 OPS-SD PC08 2 Bolts Pipe Clamp ½ 8 pipe (Light Loads) 28 OPS-SD PC13 Pipe Clamp With Adjustable Bolted Bracket ½ 2 pipe 30 OPS-SD PC21 Pipe Clamp With Perforated Plate ½ - 2 pipe 32 OPS-SD PC23 Pipe Clamp With Perforated Plate 2-4 pipe 33 OPS-SD PS01 Short Clamped Shoe for 2-6 pipe (1 Clamp) 34 OPS-SD PS02 Clamped Shoe for 2-8 pipe (2 Clamps) 35 OPS-SD PS05 Clamped Adjustable Shoe for 2-8 pipe (2 Clamps) 36 OPS-SD PS07 Clamped Shoe for 2-8 pipe (2 Clamps) 37 Art. no. 38 MultiGrid Support System 42 50-1 100-1 50-2 60-2 50-2T 100-2T 100-3 100-4 Patents and design applications Many of Oglaend System s products are patented or protected by design applications. 3
Introduction: MultiGrid Pipe Clamps is our product portfolio for the piping installation. Our product line is a combination of industry best practises and tailor made Oglaend System innovations. Our pipe clamp details are complimentary and compatible with our MultiGrid Support System. To further enhance the use of our system we also deliver adapters for the most common used equipment in the industry. The result is improved flexibility for the EPC contractors and yard industry. You can reduce your installation cost up to 60% when you use our MultiGrid Support System. Our main focus has been to deliver pipe clamp solutions for pipes ranging from 1/2 to 8. Within this scope we cover 70% of your supporting need and your total cost of installation. Download our MultiGrid Support Systems catalogue at www.oglaend-system.com and take a look at the following features: Key added values: Simplified Design & Engineering Work Quick Installation Less Weight & Volume Improved Safety Performance Enhanced Product Life & improved Integrity Pipe Clamps are part of our MultiGrid System (Oglaend System MultiDiscipline Support System) 4
5
Standard Details ½ - 2 for Mekano 50-2T2.5 (with square holes) & 60-2 Channel - Mekano 50-2T Page 41 S-M UB-1/2-4 U-Bolt Universal Bracket Page 24 OPS-SD PC03 U-Bolt (Non-Grip) Page 25 OPS-SD PC04 U-Bolt (Grip) Page 10 OPS-SD AD01-A Adapter U-Bolt /Mekano 6 Page 26 OPS-SD PC05 U-Bolt Vibro-Dampening (Grip) Page 27 OPS-SD PC06 U-Bolt Vibro-Dampening (Non-Grip)
MultiGrid System: Shown together with Mekano 50-2T & 60-2 Tailor-made for Small Bore Pipe Support. Page 12 OPS-SD LG01 LG/HD for Pipe Shoe Channel - Mekano 60-2 (L60x6mm) Page 33 OPS-SD PC13 Pipe Clamp - Adjustable Page 32 OPS-SD PC21 Pipe Clamp with perforated Plate Page 18 OPS-SD MI01 Low friction Isolating Pads (PTFE) (2 x 2mm shim plates included) Page 28 OPS-SD PC08 Pipe Clamp for CS, SS & Alloy Lines (limitation range 1/2 8 pipe) Page 33 OPS-SD PC23 Pipe Clamp With Perforated Plate (limitation range 2 4 pipe) 7
Standard Details 2-8 for Mekano 100-2T3 & 4 (with square holes) Channel - Mekano 100-3T Page 10 OPS-SD AD01-B 2-5 U-Strap-Adapter Page 22 OPS-SD PC01 U-Strap (Non-Grip) Page 23 OPS-SD PC02 U-Strap (Grip) Page 10 OPS-SD AD01-A (x 2) 6 & 8 U-Strap-Adapter Page 18 OPS-SD MI01 Low friction Isolating Pads (PTFE) 8 Page 20 OPS-SD MI02 Low friction Isolating Pads (PTFE) Page 33 OPS-SD-PC23 Pipe Clamp With Perforated Plate (limitation range 2 4 pipe)
Page 34 OPS-SD PS01 Short Shoe (1 Clamp) Page 35 OPS-SD PS02 Shoe (2 Clamps) Page 36 OPS-SD PS05 Adjustable Shoe Channel - Mekano 100-4 Page 37 OPS-SD PS07 Adjustable Shoe Page 16 OPS-SD PG01 Pipe Grounding (Line Stop) for Pipe Shoe Page 14 OPS-SD LG05 LG/HD for Pipe Shoe 9
Adapter U-Bolt /U-Strap to Mekano OPS-SD AD01 Function: N/A 1. U-Bolts ½ 2 with AD01-A on channel Mekano 50-2T. 2. U-Strap 2 5 with AD01-B on channel Mekano 100-2T. 3. U-Strap 6 & 8 2 pcs AD01-A on channel Mekano 100-4. See p. 20. For 6 and 8 Remove the original flat bar and use isolation pad (See p. 20). 10 MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
U-Bolt & U-Strap Adapter OPS-SD AD01 TYPE OPS-SD AD01-A TYPE OPS-SD AD01-B U-Bolt pipe 1/2" - 2" U-Strap pipe 6" & 8" U-Strap pipe 2" - 5" (need 2 items) Ø18 Slotting diameter fit strap bolt size 210 65 110 56 45 45 Ø11 11x35 4 5 Typical Part Type Name Available Material Standard Detail Temp. Limitation Max. Design Temp. Min. Design Temp. OPS-SD AD01-A HDG + SS (316L) N/A -105 C OPS-SD AD01-B HDG + SS (316L) N/A -105 C Type Description Weight (SS) HDG SS Kg Art. no. Art. no. OPS-SD AD01-A Adapter U-Bolt Pipe 1/2-2 + U-Strap 6 & 8 (need 2 items) 0,253 PS60053 1372556 OPS-SD AD01-B Adapter U-Strap Pipe 2-5 0,766 PS60052 1372557 Notes: 11
OPS-SD LG01 Function: LG, HD (Grip /Non-Grip) Line Guide for Pipe Shoe /MultiGrid LG01 with 1/2-2 shoe on channel Mekano 50-2T (or 60-2) LG01 with 1/2-8 shoe on channel Mekano 100-3T 12 MultiGrid Compatible: Mekano 50-2T, 60-2,100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
Bolted Line Guide / Hold down OPS-SD LG01 Mekano CH 100-3 in use with Fixing Clamp for Pipe Shoe Thickness: MG SHIMSEPLATER MG SHIM PLATES Type: Art. no. SS: 1mm 5mm 3mm MG FC-11 MG SH-1 MG SH-5 MG SH-3 80263 80264 80865 80889 100 71 B A Non gripping A Gripping B 10mm shoe B Add MG SH-1 when needed C D 15mm shoe Typical Part Type Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD LG01 SS 150 C -46 C OPS-SD LG01 HDG 150 C -46 C Art. numbers refers to complete set for one shoe Type A mm: B mm: Fit: Weight (SS) HDG SS Kg Art. no. Art. no. OPS-SD LG01-A ** 12 2 10mm shoe non grip 1,22 PS41674 PS41678 OPS-SD LG01-B * 9 0 10mm shoe grip 0,85 PS41675 PS41679 OPS-SD LG01-C ** 17 2 15mm shoe non grip 1,73 PS41676 PS41680 OPS-SD LG01-D ** 14 0 15mm shoe grip 1,36 PS41677 PS41681 Notes: MultiGrid Compatible: Mekano Channels: 50-2T, 60-2, 100-3, 100-2T & 100-4 * Bolt size: On CH50-2T + CH 100-2T + CH 100-3 USE M10x25 Locking bolt ** Bolt size: Use M10x35 Locking bolt On CH 100-4 use M10X130 Hex (1372950 not included) HDG = Hot Dipped Galvanized Carbon Steel (355) 13
Line Guide for Pipe Shoe /MultiGrid OPS-SD LG05 Function: LG, HD LG05 used on both sides of channel Mekano 100-4 LG05 on channel Mekano 100-2T 14 MultiGrid Compatible: Mekano 100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
A Bolted Line Guide / Hold down OPS-SD LG05 11x35 E D B Ø11 C Typical Part Type Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD LG05-(X)-SS SS 150 C -46 C OPS-SD LG05-(X)-HDG HDG 150 C -46 C Type Pipe Shoe A mm: B mm: C mm: D mm: E mm: Weight HDG SS Size Kg Art. no. Art. no. OPS-SD LG05-A 10 130 210 6 106 18 1,0 PS41860 PS41862 OPS-SD LG05-B 15 130 210 6 106 23 1,0 PS41870 PS41872 Notes: Gives 3mm gap MultiGrid Compatible: Mekano Channels: 100-2T, 100-3 & 100-4 HG = Hot Dipped Galvanized Carbon Steel (355) 15
OPS-SD PG01 Function: LS Line Stop for Pipe Shoe /MultiGrid PG01 with LG05 used on both sides of channel Mekano 100-4 PG01 on channel Mekano 100-4 PG01 on channel Mekano 100-2T PG01 with LG05 on channel Mekano 100-2T 16 MultiGrid Compatible: Mekano 50-2T, 60-2,100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
Bolted Line Guide / Hold down OPS-SD PG01 A 50 23 C 75 18 A 10,3X10,3 HDG 11X11 B Typical Part Type Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PG01-SS SS 150 C -46 C OPS-SD PG01-HDG HDG 150 C -46 C Type A mm: B mm: C mm: Weight HDG SS Kg Art. no. Art. no. OPS-SD PG01* 50 100 6 0,42 PS41902 PS41900 * Delivered as pairs (one pair is 0,84 kg) Notes: MultiGrid Compatible: Mekano Channels: 50-2T, 60-2, 100-2T, 100-3 & 100-4 HDG=Hot Dipped Galvanized Carbon Steel (355) 17
OPS-SD MI01 Function: RS (Rest) Low friction Insulation Pad (PTFE) MI01 on channel Mekano 60-2 MI01 and MI02 on channel Mekano 100-2T 18 MultiGrid Compatible: Mekano 50-2T, 60-2,100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
Low friction MultiGrid Insulation Pad -46 C to +150 C OPS-SD MI01 B 3mm PTFE 2mm SS 2mm SS A 11x11 C 24 25 Typical Part Type Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD MI01-(X)-SS SS 150 C -46 C OPS-SD MI01-(X)-HDG HDG 150 C -46 C Type A mm: B mm: C mm: Weight (PTFE & HDG) (PTFE & SS) Kg Art. no. Art. no. OPS-SD MI01-A 49 100 75 0,181 PS42006 PS42000 OPS-SD MI01-B 49 150 125 0,276 PS42007 PS42001 OPS-SD MI01-C 49 200 175 0,370 PS42008 PS42002 OPS-SD MI01-D 49 250 225 0,465 PS42009 PS42003 OPS-SD MI01-E 49 300 275 0,559 PS42010 PS42004 OPS-SD MI01-F 49 400 375 0,748 PS42011 PS42005 Notes: Art. no includes 1 x 3mm PTFE plate & 2 x 2mm shim plates (SS) Temp Range: -46 to +150 deg C MultiGrid Compatible: Mekano Channels: 50-2T, 60-2, 100-2T, (100-3) HDG = Hot Dipped Galvanized Carbon Steel (235) 19
OPS-SD MI02 Function: RS (Rest) Low friction Insulation Pad (PTFE) MI02 on channel Mekano 100-4 20 MultiGrid Compatible: Mekano 100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
Low friction MultiGrid Insulation Pad -46 C to +150 C OPS-SD MI02 3mm PTFE 2mm SS 2mm SS C A 4xØ11 50 20 B Typical Part Type Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD MI02-(X)-SS SS 150 C -46 C OPS-SD MI02-(X)-HDG HDG 150 C -46 C Type A mm: B mm: C mm: Weight (PTFE & HDG) (PTFE & SS) Kg Art. no. Art. no. OPS-SD MI02-A 49 100 75 0,335 PS42026 PS42020 OPS-SD MI02-B 49 150 125 0,508 PS42027 PS42021 OPS-SD MI02-C 49 200 175 0,682 PS42028 PS42022 OPS-SD MI02-D 49 250 225 0,856 PS42029 PS42023 OPS-SD MI02-E 49 300 275 1,029 PS42030 PS42024 OPS-SD MI02-F 49 400 375 1,377 PS42031 PS42025 Notes: Art. no includes 1 x 3mm PTFE plate & 2 x 2mm shim plates (SS) Temp Range: -46 to +150 deg C MultiGrid Compatible: Mekano Channels: 50-2T, 60-2, 100-2T, (100-3) HDG = Hot Dipped Galvanized Carbon Steel (235) 21
OPS-SD PC01 Function: RS, LG, HD (Non Grip) U-strap for CS, SS & Alloy lines 50-600 mm/2-8 OPS-SD PC01 (Non-Grip) Fv W H R Fc T L 3 J E W C M K Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PC01-(DN)-SS SS 150 C -46 C OPS-SD PC01-(DN)-HDG HDG 150 C -46 C Type Line U-Strap Stud Bolt Max Loads (kn) Weight HDG SS Size Dimensions Size SS HDG Kg Art. no. Art. no. mm in C H K R W E J L M T FV FC FV FC OPS-SD PC01-050 DN 50 2 92 6 130 35 50 20 1 60 10 60 9,6 2,1 16 3,5 0,7 PS43013 PS43000 OPS-SD PC01-080 DN 80 3 124 6 165 50 50 25 5 70 12 70 14,4 1,8 24 3 1,0 PS43014 PS43001 OPS-SD PC01-100 DN 100 4 148 6 190 62 50 30 10 115 12 85 14,4 1,5 24 2,5 1,2 PS43015 PS43002 OPS-SD PC01-125 DN 125 5 176 6 225 76 50 35 20 130 12 95 14,4 1,2 24 2 1,3 PS43016 PS43003 OPS-SD PC01-150 DN 150 6 206 6 260 89 50 55 10 155 16 100 27 1,5 24 2,5 2,1 PS43017 PS43004 OPS-SD PC01-200 DN 200 8 260 6 310 116 50 80 10 180 16 100 27 1,2 45 2 2,5 PS43018 PS43005 Notes: All welds to be a = 0,7 x WT, but max 4 mm. OPS-SD MI05 only to be used with stainless steel. Max loads in kn Kv and Fc are non-concurrent loads. HDG = Hot Dipped Galvanized Carbon Steel (355) C & K are subject to Variation. (Noted for guidance) 22 MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 Adapter required! See OPS-SD AD01-A & B (page 10) All Mekano Channels overview displayed on page 3.
OPS-SD PC02 Function: RS, HD, LG, LS (Grip) U-strap for CS, SS & Alloy lines 50-600 mm/2-8 OPS-SD PC02 (Non-Grip) Fv W H R Fc T L 3 J E W C M K Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PC02-(DN)-SS SS 150 C -46 C OPS-SD PC02-(DN)-HDG HDG 150 C -46 C Type Line U-Strap Stud Bolt Max Loads (kn) Weight HDG SS Size Dimensions Size SS HDG Kg Art. no. Art. no. mm in C H K R W E J L M T FV FC FV FC OPS-SD PC02-050 DN 50 2 92 6 130 35 50 20 9 60 10 60 9,6 2,1 16 3,5 0,7 PS43054 PS43048 OPS-SD PC02-080 DN 80 3 124 6 165 50 50 25 15 70 12 70 14,4 1,8 24 3 1,0 PS43055 PS43049 OPS-SD PC02-100 DN 100 4 148 6 190 62 50 30 20 115 12 85 14,4 1,5 24 2,5 1,2 PS43056 PS43050 OPS-SD PC02-125 DN 125 5 176 6 225 76 50 35 30 130 12 95 14,4 1,2 24 2 1,3 PS43057 PS43051 OPS-SD PC02-150 DN 150 6 206 6 260 89 50 55 25 155 16 100 27 1,5 24 2,5 2,0 PS43058 PS43052 OPS-SD PC02-200 DN 200 8 260 6 310 116 50 80 25 180 16 100 27 1,2 45 2 2,5 PS43059 PS43053 Notes: All welds to be a = 0,7 x WT, but max 4 mm. OPS-SD MI05 only to be used with stainless steel. Max loads in kn Kv and Fc are non-concurrent loads. HDG = Hot Dipped Galvanized Carbon Steel (355) C & K are subject to Variation. (Noted for guidance) MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 Adapter required! See OPS-SD AD01-A & B (page 10) All Mekano Channels overview displayed on page 3. 23
U-Bolt (Non-Grip) for 1/2-2 Pipe OPS-SD PC03 Function: RS, LG, HD (Non Grip) OPS-SD PC03 Fy X LOW FRICTION LINING A PLAIN WASHER Fc F K A 62 PLAIN WASHER STEEL BUSH C B C G D A SECTION A-A Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PC03-(DN)-SS SS 150 C -46 C OPS-SD PC03-(DN)-HDG HDG 150 C -46 C Type Line Pipe Clamp Max Loads (kn) Weight HDG SS Size Dimensions SS Carbon Steel Kg Art. no. Art. no. mm inch A B C K F G M X Fy Fc Fy Fc OPS-SD PC03-015 DN 15 ½ 6 37 30 57 60 6 29 21 3 1,4 4,2 2 0,1 PS43110 PS43100 OPS-SD PC03-020 DN 20 ¾ 6 43 34 60 65 6 35 27 3 1,3 4,2 1,9 0,1 PS43111 PS43101 OPS-SD PC03-025 DN 25 1 6 50 36 60 65 6 42 34 3 1,3 4,2 1,9 0,1 PS43112 PS43102 OPS-SD PC03-030 DN 32 1¼ 6 69 49 60 70 10 56 43 9,6 2,8 16 4,1 0,2 PS43113 PS43103 OPS-SD PC03-040 DN 40 1½ 6 75 53 70 80 10 62 49 9,6 2,5 16 3,8 0,3 PS43114 PS43104 OPS-SD PC03-050 DN 50 2 6 87 59 75 90 10 74 61 9,6 2,1 16 3,5 0,3 PS43115 PS43105 Notes: Std. type includes all bolt, plain washers and double nuts Melting/burn at temp. 400 C (burn) HDG only for >1 pipe 24 MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 Adapter required! See OPS-SD AD01-A (page 10) All Mekano Channels overview displayed on page 3.
U-Bolt (Grip) for 1/2-2 Pipe OPS-SD PC04 Function: RS, HD, LG, LS (Grip) OPS-SD PC04 Fy Y Fc M F K A X B G Y C C 25 SECTION Y-Y Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PC04-(DN)-SS SS 150 C -46 C OPS-SD PC04-(DN)-HDG HDG 150 C -46 C Type Line Pipe Clamp Max Loads (kn) Weight HDG SS Size Dimensions SS Carbon Steel Kg Art. no. Art. no. mm inch A B C K F G M X Fy Fc Fy Fc OPS-SD PC04-015 DN 15 ½ 6 37 30 57 60 6 29 21 3 1,4 4,2 2 0,1 PS43160 PS43150 OPS-SD PC04-020 DN 20 ¾ 6 43 34 60 65 6 35 27 3 1,3 4,2 1,9 0,1 PS43161 PS43151 OPS-SD PC04-025 DN 25 1 6 50 36 60 65 6 42 34 3 1,3 4,2 1,9 0,1 PS43162 PS43152 OPS-SD PC04-030 DN 32 1¼ 6 69 49 60 70 10 56 43 9,6 2,8 16 4,1 0,2 PS43163 PS43153 OPS-SD PC04-040 DN 40 1½ 6 75 53 70 80 10 62 49 9,6 2,5 16 3,8 0,3 PS43164 PS43154 OPS-SD PC04-050 DN 50 2 6 87 59 75 90 10 74 61 9,6 2,1 16 3,5 0,3 PS43165 PS43155 Notes: Std. type includes all bolt, plain washers and double nuts Melting/burn at temp. 400 C (burn) HDG only for >1 pipe MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 Adapter required! See OPS-SD AD01-A (page 10) All Mekano Channels overview displayed on page 3. 25
U-Bolt Grip (Vibro-Damping) Type S.T.K) OPS-SD PC05 Function: RS, LG, HD (Grip) OPS-SD PC05 Fy I Fc D F A B C G H Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PC05-(DN)-SS SS 100 C -60 C OPS-SD PC05-(DN)-HDG HDG 100 C -60 C Type Line Pipe Clamp Max Loads (kn) Weight HDG SS Size Dimensions SS Carbon Steel Kg Art. no. Art. no. mm inch A F B I G C H D Fy Fc Fy Fc OPS-SD PC05-015 DN 15 ½ 21 60 37 12 M6 57 30 10 3 1,4 4,2 2 0,1 PS43190 PS43180 OPS-SD PC05-020 DN 20 ¾ 27 65 43 12 M6 63 30 10 3 1,3 4,2 1,9 0,1 PS43191 PS43181 OPS-SD PC05-025 DN 25 1 34 65 50 12 M6 70 30 10 3 1,3 4,2 1,9 0,1 PS43192 PS43182 OPS-SD PC05-030 DN 32 1¼ 43 70 69 18 M10 99 30 10 9,6 2,8 16 4,1 0,2 PS43193 PS43183 OPS-SD PC05-040 DN 40 1½ 49 75 75 18 M10 105 30 10 9,6 2,5 16 3,8 0,3 PS43194 PS43184 OPS-SD PC05-050 DN 50 2 61 80 87 18 M10 117 30 10 9,6 2,1 16 3,5 0,3 PS43195 PS43185 Notes: Std. type includes all bolt, plain washers and double nuts Melting/burn at temp. 400 C (burn) HDG only for >1 pipe 26 MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 Adapter required! See OPS-SD AD01-A for usage (page 10) All Mekano Channels overview displayed on page 3.
U-Bolt Grip (Vibro-Damping) Type S.T.K) OPS-SD PC06 Function: RS, HD, LG, LS (Non Grip) OPS-SD PC06 Fy I Fc F D A B C G H Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PC06-(DN)-SS SS 100 C -60 C OPS-SD PC06-(DN)-HDG HDG 100 C -60 C Type Line Pipe Clamp Max Loads (kn) Weight HDG SS Size Dimensions SS Carbon Steel Kg Art. no. Art. no. mm inch A F B I G C H D Fy Fc Fy Fc OPS-SD PC06-015 DN 15 ½ 21 60 37 12 M6 57 30 10 3 1,4 4,2 2 0,1 PS43210 PS43200 OPS-SD PC06-020 DN 20 ¾ 27 65 43 12 M6 63 30 10 3 1,3 4,2 1,9 0,1 PS43211 PS43201 OPS-SD PC06-025 DN 25 1 34 65 50 12 M6 70 30 10 3 1,3 4,2 1,9 0,1 PS43212 PS43202 OPS-SD PC06-030 DN 32 1¼ 43 70 69 18 M10 99 30 10 9,6 2,8 16 4,1 0,2 PS43213 PS43203 OPS-SD PC06-040 DN 40 1½ 49 75 75 18 M10 105 30 10 9,6 2,5 16 3,8 0,3 PS43214 PS43204 OPS-SD PC06-050 DN 50 2 61 80 87 18 M10 117 30 10 9,6 2,1 16 3,5 0,3 PS43215 PS43205 Notes: Std. type includes all bolt, plain washers and double nuts Melting/burn at temp. 400 C (burn) HDG only for >1 pipe MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 Adapter required! See OPS-SD AD01-A for usage (page 10) All Mekano Channels overview displayed on page 3. 27
OPS-SD PC08 Function: N/A 2 Bolts Pipe Clamp ½ 8 pipe (Light Loads) 28 MultiGrid Compatible: Mekano 50-2T, 60-2,100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
2 Bolts (Light Load) Pipe Clamp for CS, SS & Alloy lines 15-200 mm/ 1/2-8 OPS-SD PC08 H Fv W M A A O B G Typical Part Number Name. Available Available Material Material Standard Standard Detail Detail Temperature Limitation Part Number Name. Short Short Code Code Max. Max. Design Design Temp. Temp. Min. Min. Design Design Temp. Temp. OPS SD OPS-SD PC08 (DN) SS PC08-(DN)-SS SS SS 150 C 150 C -46 C46 C OPS SD OPS-SD PC08 (DN) CS PC08-(DN)-CS CS CS 150 C 150 C -46 C46 C OPS SD OPS-SD PC08 (DN) HDG PC08-(DN)-HDG HDG HDG 150 C 150 C -46 C46 C Type Linesize Pipe Clamp Pipe Clamp Bolt Size Maximum Maximum Weight HDG SS Linesize Bolt Size Type Dimensions Loads (kn) Weight Dimensions Loads (kn) Kg Art. no. Art. no. Kg mm mm in in A A B G B H G O H W O WM Fv M (SS) Fv Fv (HDG) (SS) Fv (HDG) OPS SD OPS-SD PC08-015* PC08 015* DN DN 15 15 ½ ½" 29,5 29,5 75 675 4 6 29,5 4 29,5 30 M8 30 x 35 M8 x 1,3 35 2,2 1,3 0,202,2 PS43333 0,20 PS43299 OPS SD OPS-SD PC08-020* PC08 020* DN DN 20 203/4 3/4" 32,2 32,2 80,4 80,4 6 4 6 32,8 4 32,8 30 M8 30 x 35 M8 x 1,3 35 2,2 1,3 0,22,2 PS43334 0,22 PS43300 OPS SD OPS-SD PC08-025* PC08 025* DN DN 25 25 1 1" 35,7 35,7 97,3 97,3 6 4 6 404 40 30 M8 30 x 35 M8 x 1,3 35 2,2 1,3 0,242,2 PS43335 0,24 PS43301 OPS SD OPS-SD PC08-030* PC08 030* DN DN 32301 1/4 1 1/4" 39,8 39,8 95,5 95,5 6 4 6 42,2 4 42,2 30 M8 30 x 35 M8 x 1,3 35 2,2 1,3 0,262,2 PS43336 0,26 PS43302 OPS SD OPS-SD PC08-040* PC08 040* DN DN 40 401 ½ 1 ½" 44,3 44,3 104,5 104,5 6 4 6 54,4 4 54,4 30 M8 30 x 35 M8 x 2,2 35 3,6 2,2 0,293,6 PS43337 0,29 PS43303 OPS SD OPS-SD PC08-050 PC08 050 DN DN 50 50 2 2" 57 57 152 12 152 512 665 66 30 M12 30 x M12 60 x 2,760 4,5 2,7 0,444,5 PS43338 0,44 PS43304 OPS SD OPS-SD PC08-080 PC08 080 DN DN 80 80 3 3" 76 76 192 16 192 516 955 95 30 M12 30 x M12 60 x 2,760 4,5 2,7 0,574,5 PS43339 0,57 PS43305 OPS SD OPS-SD PC08-100 PC08 100 DN DN 100 1004 4" 95 95 228 20 228 620 120 6 120 40 M16 40 x 70 M16 x 2,770 4,5 2,7 1,084,5 PS43340 1,08 PS43306 OPS SD OPS-SD PC08-125 PC08 125 DN DN 125 1255 5" 114 114 270 20 270 620 147 6 147 40 M16 40 x 70 M16 x 2,770 4,5 2,7 1,24,5 PS43341 PS43307 OPS SD OPS-SD PC08-150 PC08 150 DN DN 150 1506 6" 127 127 304 24 304 1024 174 10 174 40 M20 40x M20 100 x 4,3 100 7,2 4,3 2,17,2 PS43342 PS43308 OPS-SD PC08-200 DN 200 8 OPS SD PC08 200 DN 200 159 8" 368 159 24 10 225 368 24 10 40 M20 x 100 4,3 225 40 M20 x 100 7,2 4,3 2,5 PS43343 7,2 PS43309 OPS SD PC08 250 DN 250 10" 190 444 27 12 279 50 M24 x 110 6,5 10,9 Notes: OPS SD PC08 300 DN 300 12" 216 496 27 12 330 50 M24 x 110 6,5 10,9 * These clamps can be mounted as Grip or Non-Grip. OPS SD PC08 350 DN 350 14" 235 546 27 12 362 70 M24 x 110 6,5 10,9 HDG = Hot Dipped Galvanized Carbon Steel (355) OPS SD PC08 400 DN 400 16" 260 598 27 12 412 70 M24 x 110 6,5 10,9 OPS SD PC08 450 DN 450 18" 298 686 30 15 463 70 M24 x 120 8,1 13,6 OPS SD PC08 500 DN 500 20" 324 750 40 15 512 70 M24 x 130 8,1 13,6 OPS SD PC08 600 DN 600 24" 387 872 40 15 616 80 M30 x 140 8,1 13,6 Notes: * These clamps can be mounted as Grip or Non Grip. HDG = Hot Dipped Galvanized Carbon Steel (355) 29
OPS-SD PC13 Function: RS, HD, LG, LS Pipe Clamp with adjustable Bolted Bracket ½ 2 pipe To be used for all directions Sleeves to be removed for Grip function (pre-set Non-Grip) Slide and/or rotate 180 to fit 25mm perforated angle Adjustable to fit 22mm vertical perforated angle. Pre-set height = 100mm (range = +25/ -15mm) 30 MultiGrid Compatible: Mekano 50-2T, 60-2,100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
Pipe Clamp with adjustable Bolted Bracket for Pipes < 2 OPS-SD PC13 T INSUL STRIP REF OMI-08 100 +25/-15 W L44x4 M O A A G L40x4 Use L 30x3 on size 015 and 020 LOCKING SCREWS M10x35 NOTE: Sleeves ONLY to be used if Non-Grip or together with OMI-08 4 60 25 5 65 25 SNIPE TO FIT G R5 5 Typical Part Number Name Available Material Standard Detail Temp. Limitation Typical Part Type Name Available Material Short Code: Max. design Design temp. Temp. Min. Design design Temp. temp. OPS-SD PC13-(DN)-SS SS 150 C C -46 C OPS-SD PC13-(DN)-HDG HDG 150 C C -46 C Line Size Pipe Clamp Dimensions MAX LOADS (kn) Weight Type Type Line mm Size inch A Pipe Clamp B Dimensions G T O W Max M Loads (kn) SS Weight HDG CS SS KG OPS-SD PC13-015 mm DN 15 inch NPS ½ A 29,5 B G 75 T 6 O 4 W 29,5 30 M M8X35 SS CS 4,5 Kg Art. 6 no. Art. 0,7 no. OPS-SD PC13-015 PC13-020 DN DN 1520 ½ NPS 29,5 ¾ 32,2 75 80,4 6 4 6 29,54 30 32,8 M8X35 30 M8X35 4,5 6 4,50,7 PS43755 6 PS43750 0,7 OPS-SD PC13-020 PC13-025 DN DN 2025 ¾ NPS 32,2 1 35,7 80,4 87,3 6 4 6 32,84 3040 M8X35 30 M8X35 4,5 6 5,50,7 PS43756 7 PS43751 0,8 OPS-SD PC13-025 PC13-030 DN DN 2530 1 NPS 35,7 1 39,8 87,3 95,5 6 4 6 40 4 30 42,2 M8X35 30 M8X35 5,5 7 5,50,8 PS43757 7 PS43752 0,8 OPS-SD PC13-030 PC13-040 DN DN 32401¼ NPS 39,8 1 44,3 95,5 104,5 6 4 6 42,24 30 54,4 M8X35 30 M8X35 5,5 7 5,50,8 PS43758 7 PS43753 0,8 OPS-SD PC13-050 DN 50 NPS 2 50 120 6 4 65 30 M10X40 5,5 7 0,9 OPS-SD PC13-040 DN 40 1½ 44,3 104,5 6 4 54,4 30 M8X35 5,5 7 0,8 PS43759 PS43754 OPS-SD PC13-050 DN 50 2 50 120 6 4 65 30 M10X40 5,5 7 0,9 PS43761 PS43760 Notes: Notes: Temperature range for lining ref. MI-08 is -46 C to +300 C Temperature range for lining ref. MI-08 is -46 C to +300 C Std. type includes all bolt, plain washers and double nuts Std. all bolt, plain washers and double nuts Adjustable vertical range = +25/-15mm (pre-set hight = 100mm) vertical range = +25/-15mm (pre-set hight = 100mm) 31
OPS-SD PC21 Function: RS, HD, LG, LS Bolted Clamp with bended Perforated Plate OPS-SD PC21 for Pipes < 2 Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PC21-(DN)-SS SS 150 C -46 C OPS-SD PC21-(DN)-HDG HDG 150 C -46 C Type Line Size Pipe Clamp Dimensions Bolt Max Loads (kn) Weight HDG SS mm inch A B G H O T W Size SS CS Kg Art. no. Art. no. OPS-SD PC21-015 DN 15 ½ 29,5 75,0 6 147,8 29,5 4 30 M8X35 5,0 8,0 0,4 PS44105 PS44100 OPS-SD PC21-020 DN 20 ¾ 32,2 80,4 6 151,6 32,8 4 30 M8X35 5,0 8,0 0,5 PS44106 PS44101 OPS-SD PC21-025 DN 25 1 35,7 87,3 6 156,2 40 4 30 M8X35 5,0 8,0 0,5 PS44107 PS44102 OPS-SD PC21-030 DN 32 1¼ 39,8 95,5 6 161,8 42,2 4 30 M8X35 5,0 8,0 0,5 PS44108 PS44103 OPS-SD PC21-040 DN 40 1½ 44,3 104,5 6 165,5 54,4 4 30 M8X35 5,0 8,0 0,6 PS44109 PS44104 OPS-SD PC21-050 DN 50 2 53,3 120,0 6 170,5 66,0 4 30 M10X40 5,0 8,0 0,7 PS44111 PS44110 Notes: Temperature range for lining ref. MI-08 (Zetex Wrapper) is -46 C to +300 C Std. type includes all bolt, plain washers and double nuts 32 MultiGrid Compatible: Mekano All Types All Mekano Channels overview displayed on page 3.
Bolted Clamp with bended Perforated Plate for 2-4 Pipes OPS-SD PC23 Function: RS, HD, LG, LS OPS-SD PC23 B A A W O G α H 11x35 50 4 27,5 T 15 22,5 25 22,5 15 100 Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PC23-(DN)-SS SS 150 C -46 C OPS-SD PC23-(DN)-HDG HDG 150 C -46 C Type Line Size Pipe Clamp Dimensions Bolt Max Loads (kn) Weight HDG SS mm inch A B G H O T W α Size SS CS Kg Art. no. Art. no. OPS-SD PC23-050-SS DN 50 2 57 152 12 160 66 5 30 M12X60 5 8 0,76 PS43905 PS43900 OPS-SD PC23-065-SS DN 65 2½ 70 178 12 170 83 5 30 M12X60 5 8 0,84 PS43906 PS43901 OPS-SD PC23-080-SS DN 80 3 76 192 16 180 99 5 30 M12X60 5 8 0,89 PS43907 PS43902 OPS-SD PC23-100-SS DN 100 4 95 228 20 196 124 6 40 M16X70 5 8 1,4 PS43909 PS43904 Notes: Temperature range for lining ref. MI-08 is -46 C to +300 C Std. type includes all bolt, plain washers and double nuts MultiGrid Compatible: Mekano All Types All Mekano Channels overview displayed on page 3. 33
Short Clamp for CS, SS & Alloy lines 50-150 mm/2-6 100 high OPS-SD PS01 Function: RS (HD, LG, LS (Grip)) OPS-SD PS01 Fv α Fv α D Fc R Fc R Fl 10 C E 100 C E 100 10 10 100 100 2-4 5-6 Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PS01-(DN)-SS SS 150 C -46 C OPS-SD PS01-(DN)-HDG HDG 150 C -46 C Max Loads (kn) Type Line Size Shoe Dimensions Clamp Info SS/HDG (see notes) Weight HDG SS mm in C D E R TYPE No. Off α Fv (kn) Fc (kn) Fl (kn) Kg Art. no. Art. no. OPS-SD PS01-050 DN 50 2 88 30 82 38 OPS SD PC08 1 60 12 6 2 1,5 PS46020 PS46015 OPS-SD PS01-080 DN 80 3 86 30 82 53 OPS SD PC08 1 50 12 6 3 1,7 PS46021 PS46016 OPS-SD PS01-100 DN 100 4 88 50 81 66 OPS SD PC08 1 50 12 6 4 2,2 PS46022 PS46017 OPS-SD PS01-125 DN 125 5 87 50 81 79 OPS SD PC08 1 45 12 6 4 2,3 PS46023 PS46018 OPS-SD PS01-150 DN 150 6 82 50 79 97 OPS SD PC08 1 50 16 8 6 3,2 PS46024 PS46019 Notes: All welds to be a = 0,7 x WT, but max 4 CFW. Load Chart figures is a recommendation due to the added limitations as clamp friction capacity, and usage with other OPS Standard Details Maximum Blast Loads recommendation is then double the chart loads (when deflection is allowed) HDG = Hot Dipped Galvanized Carbon Steel (355) 34 MultiGrid Compatible: Mekano All Types All Mekano Channels overview displayed on page 3.
Clamped Shoe for CS, SS & Alloy lines 50-200 mm/2-8 100 high - 300 long OPS-SD PS02 Function: RS (HD, LG, LS (Grip)) OPS-SD PS02 Fv α D Fc R Fl C 8 10 E 100 280 100 300 Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PS02-(DN)-SS SS 150 C -46 C OPS-SD PS02-(DN)-HDG HDG 150 C -46 C Max Loads (kn) Type Line Size Shoe Dimensions Clamp Info SS/HDG (see notes) Weight HDG SS mm in C D E R TYPE No. Off α Fv (kn) Fc (kn) Fl (kn) Kg Art. no. Art. no. OPS-SD PS02-050 DN 50 2 88 30 82 38 OPS SD PC08 2 60 18 6 2 5,6 PS46224 PS46218 OPS-SD PS02-080 DN 80 3 86 30 82 53 OPS SD PC08 2 50 18 6 2 5,9 PS46225 PS46219 OPS-SD PS02-100 DN 100 4 88 50 81 66 OPS SD PC08 2 50 18 6 3 6,9 PS46226 PS46220 OPS-SD PS02-125 DN 125 5 87 50 81 79 OPS SD PC08 2 45 18 6 4 7,2 PS46227 PS46221 OPS-SD PS02-150 DN 150 6 82 50 79 97 OPS SD PC08 2 50 30 10 7 9,0 PS46228 PS46222 OPS-SD PS02-200 DN 150 6 85 50 75 123 OPS SD PC08 2 50 30 10 7 9,8 PS46229 PS46223 Notes: All welds to be a = 0,7 x WT, but max 4 CFW. Load Chart figures is a recommendation due to the added limitations as clamp friction capacity, and usage with other OPS Standard Details Maximum Blast Loads recommendation is then double the chart loads (when deflection is allowed) HDG = Hot Dipped Galvanized Carbon Steel (355) MultiGrid Compatible: Mekano All Types All Mekano Channels overview displayed on page 3. 35
Clamped Shoe for CS, SS & Alloy lines 50-200 mm/2-8 100 high - 316 long OPS-SD PS05 Function: RS (HD, LG, LS (Grip)) OPS-SD PS05 Adjustable from 87,5-112,5 mm in 2,5 mm steps Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PS05-(DN)-SS SS 150 C -46 C OPS-SD PS05-(DN)-HDG HDG 150 C -46 C Shoe Max Loads (kn) Type Line Size Dimensions Clamp Info SS/HDG (see notes) Weight HDG SS mm in D R TYPE No. Off α Fv (kn) Fc (kn) Fl (kn) Kg Art. no. Art. no. OPS-SD PS05-0050 DN 50 2 30 33 OPS SD PS05 3 60 18 6 2 7,4 PS46073 PS46067 OPS-SD PS05-0080 DN 80 3 30 47,5 OPS SD PS05 3 60 18 6 2 8,0 PS46074 PS46068 OPS-SD PS05-0100 DN 100 4 40 60 OPS SD PS05 3 50 18 6 3 9,0 PS46075 PS46069 OPS-SD PS05-0125 DN 125 5 40 73,5 OPS SD PS05 3 45 18 6 4 9,3 PS46076 PS46070 OPS-SD PS05-0150 DN 150 6 40 87 OPS SD PS05 3 45 30 10 7 11,1 PS46077 PS46071 OPS-SD PS05-0200 DN 200 8 40 112,5 OPS SD PS05 3 45 30 10 7 12,9 PS46078 PS46072 Notes: All welds to be a = 0,7 x WT, but max 4 CFW. Load Chart figures is a recommendation due to the added limitations as clamp friction capacity, and usage with other OPS Standard Details Maximum Blast Loads recommendations is then double the chart loads (when deflection is allowed) HDG = Hot Dipped Galvanized Carbon Steel (355) Adjustable in 2,5mm steps. Hight adj. +13/-12 in 2,5mm steps. 36 MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3.
Clamped Shoe for CS, SS & Alloy lines 50-200 mm/2-8 150 high -316 long OPS-SD PS07 Function: RS (HD, LG, LS (Grip)) OPS-SD PS07 Adjustable from 125-167,5 mm in 2,5 mm steps and from 167,5 to 182,5 in 5mm steps Typical Part Number Name Available Material Standard Detail Temp. Limitation Short Code: Max. Design Temp. Min. Design Temp. OPS-SD PS07-(DN)-SS SS 150 C -46 C OPS-SD PS07-(DN)-HDG HDG 150 C -46 C Shoe Max Loads (kn) Type Line Size Dimensions Clamp Info SS/HDG (see notes) Weight HDG SS mm in D R TYPE No. Off α Fv (kn) Fc (kn) Fl (kn) Kg Art. no. Art. no. OPS-SD PS07-0050 DN 50 2 30 33 OPS SD PS05 3 60 18 6 2 7,4 PS46043 PS46037 OPS-SD PS07-0080 DN 80 3 30 47,5 OPS SD PS05 3 60 18 6 2 8,0 PS46044 PS46038 OPS-SD PS07-0100 DN 100 4 40 60 OPS SD PS05 3 50 18 6 3 9,0 PS46045 PS46039 OPS-SD PS07-0125 DN 125 5 40 73,5 OPS SD PS05 3 45 18 6 4 9,3 PS46046 PS46040 OPS-SD PS07-0150 DN 150 6 40 87 OPS SD PS05 3 45 30 10 7 11,1 PS46047 PS46041 OPS-SD PS07-0200 DN 200 8 40 112,5 OPS SD PS05 3 45 30 10 7 12,9 PS46048 PS46042 Notes: All welds to be a = 0,7 x WT, but max 4 CFW. Load Chart figures is a recommendation due to the added limitations as clamp friction capacity, and usage with other OPS Standard Details Maximum Blast Loads recommendations is then double the chart loads (when deflection is allowed) HDG = Hot Dipped Galvanized Carbon Steel (355) Adjustable in 2,5mm steps. Hight adj. +13/-12 in 2,5mm steps. MultiGrid Compatible: Mekano 50-2T, 60-2, 100-3, 100-2T & 100-4 All Mekano Channels overview displayed on page 3. 37
Page 10 HDG SS Type Name Description art. no. Art.No. OPS-SD AD01-A MultiGrid U-Bolt & U-Strap 5 & 8 Adapter PS60053 1372556 OPS-SD AD01-B MultiGrid U-Strap 2-5 Adapter PS60052 1372557 Page 12 Page 14 HDG SS Type Name Description art. no. Art.No. OPS-SD LG01-A Bolted Line Guide/ Hold Down for Shoe PS41674 PS41678 OPS-SD LG01-B Bolted Line Guide/ Hold Down for Shoe PS41675 PS41679 OPS-SD LG01-C Bolted Line Guide/ Hold Down for Shoe PS41676 PS41680 OPS-SD LG01-D Bolted Line Guide/ Hold Down for Shoe PS41677 PS41681 HDG SS Type Name Description art. no. Art.No. OPS-SD LG05-A Bolted Line Guide/ Hold Down for Shoe PS41860 PS41862 OPS-SD LG05-B Bolted Line Guide/ Hold Down for Shoe PS41870 PS41872 Page 16 HDG SS Type Name Description art. no. Art.No. OPS-SD PG01 Bolted Line Stop for Shoe PS41902 PS41900 Page 18 Page 20 Page 22 HDG SS Type Name Description art. no. Art.No. OPS-SD MI01-A Low friction MultiGrid isolation pad PS42006 PS42000 OPS-SD MI01-B Low friction MultiGrid isolation pad PS42007 PS42001 OPS-SD MI01-C Low friction MultiGrid isolation pad PS42008 PS42002 OPS-SD MI01-D Low friction MultiGrid isolation pad PS42009 PS42003 OPS-SD MI01-E Low friction MultiGrid isolation pad PS42010 PS42004 OPS-SD MI01-F Low friction MultiGrid isolation pad PS42011 PS42005 HDG SS Type Name Description art. no. Art.No. OPS-SD MI02-A Low friction MultiGrid isolation pad PS42026 PS42020 OPS-SD MI02-B Low friction MultiGrid isolation pad PS42027 PS42021 OPS-SD MI02-C Low friction MultiGrid isolation pad PS42028 PS42022 OPS-SD MI02-D Low friction MultiGrid isolation pad PS42029 PS42023 OPS-SD MI02-E Low friction MultiGrid isolation pad PS42030 PS42024 OPS-SD MI02-F Low friction MultiGrid isolation pad PS42031 PS42025 HDG SS Type Name Description art. no. Art.No. OPS-SD PC01-050 U-STRAP -50mm / 2 (NON GRIP) PS43013 PS43000 OPS-SD PC01-080 U-STRAP - 80mm / 3 (NON GRIP) PS43014 PS43001 OPS-SD PC01-100 U-STRAP - 100mm / 4 (NON GRIP) PS43015 PS43002 OPS-SD PC01-125 U-STRAP - 125mm / 5 (NON GRIP) PS43016 PS43003 OPS-SD PC01-150 U-STRAP - 150mm / 6 (NON GRIP) PS43017 PS43004 OPS-SD PC01-200 U-STRAP - 200mm / 8 (NON GRIP) PS43018 PS43005 Page 23 HDG SS Type Name Description art. no. Art.No. OPS-SD PC02-050 U-STRAP - 50mm / 2 (GRIP) PS43054 PS43048 OPS-SD PC02-080 U-STRAP - 80mm / 3 (GRIP) PS43055 PS43049 OPS-SD PC02-100 U-STRAP - 100mm / 4 (GRIP) PS43056 PS43050 OPS-SD PC02-125 U-STRAP - 125mm / 5 (GRIP) PS43057 PS43051 OPS-SD PC02-150 U-STRAP - 150mm / 6 (GRIP) PS43058 PS43052 OPS-SD PC02-200 U-STRAP - 200mm / 8 (GRIP) PS43059 PS43053 38
Page 24 Page 25 Page 26 Page 27 Page 28 HDG SS Type Name Description art. no. Art.No. OPS-SD PC03-015 U-BOLT - 15mm / 1/2 (NON GRIP) PS43110 PS43100 OPS-SD PC03-020 U-BOLT - 20mm / 3/4 (NON GRIP) PS43111 PS43101 OPS-SD PC03-025 U-BOLT - 25mm / 1 (NON GRIP) PS43112 PS43102 OPS-SD PC03-030 U-BOLT - 30mm / 1 1/4 (NON GRIP) PS43113 PS43103 OPS-SD PC03-040 U-BOLT - 40mm / 1 1/2 (NON GRIP) PS43114 PS43104 OPS-SD PC03-050 U-BOLT - 50mm / 2 (NON GRIP) PS43115 PS43105 HDG SS Type Name Description art. no. Art.No. OPS-SD PC04-015 U-BOLT - 15mm / 1/2 (GRIP) PS43160 PS43150 OPS-SD PC04-020 U-BOLT - 20mm / 3/4 (GRIP) PS43161 PS43151 OPS-SD PC04-025 U-BOLT - 25mm / 1 (GRIP) PS43162 PS43152 OPS-SD PC04-030 U-BOLT - 30mm / 1 1/4 (GRIP) PS43163 PS43153 OPS-SD PC04-040 U-BOLT - 40mm / 1 1/2 (GRIP) PS43164 PS43154 OPS-SD PC04-050 U-BOLT - 50mm / 2 (GRIP) PS43165 PS43155 HDG SS Type Name Description art. no. Art.No. OPS-SD PC05-015 U-BOLT (VIBRO-DAMPING) FOR 15mm / 1/2 (GRIP) PS43190 PS43180 OPS-SD PC05-020 U-BOLT (VIBRO-DAMPING) FOR 20mm / 3/4 (GRIP) PS43191 PS43181 OPS-SD PC05-025 U-BOLT (VIBRO-DAMPING) FOR 25mm / 1 (GRIP) PS43192 PS43182 OPS-SD PC05-030 U-BOLT (VIBRO-DAMPING) FOR 30mm / 1 1/4 (GRIP) PS43193 PS43183 OPS-SD PC05-040 U-BOLT (VIBRO-DAMPING) FOR 40mm / 1 1/2 (GRIP) PS43194 PS43184 OPS-SD PC05-050 U-BOLT (VIBRO-DAMPING) FOR 50mm / 2 (GRIP) PS43195 PS43185 HDG SS Type Name Description art. no. Art.No. OPS-SD PC06-015 U-BOLT (VIBRO-DAMPING) FOR 15mm / 1/2 (NON GRIP) PS43210 PS43200 OPS-SD PC06-020 U-BOLT (VIBRO-DAMPING) FOR 20mm / 3/4 (NON GRIP) PS43211 PS43201 OPS-SD PC06-025 U-BOLT (VIBRO-DAMPING) FOR 25mm / 1 (NON GRIP) PS43212 PS43202 OPS-SD PC06-030 U-BOLT (VIBRO-DAMPING) FOR 30mm / 1 1/4 (NON GRIP) PS43213 PS43203 OPS-SD PC06-040 U-BOLT (VIBRO-DAMPING) FOR 40mm / 1 1/2 (NON GRIP) PS43214 PS43204 OPS-SD PC06-050 U-BOLT (VIBRO-DAMPING) FOR 50mm / 2 (NON GRIP) PS43215 PS43205 HDG SS Type Name Description art. no. Art.No. OPS-SD PC08-015 2 BOLTS PIPE CLAMP (LIGHT LOADS) 1/2 PS43333 PS43299 OPS-SD PC08-020 2 BOLTS PIPE CLAMP (LIGHT LOADS) 20mm / 3/4 PS43334 PS43300 OPS-SD PC08-025 2 BOLTS PIPE CLAMP (LIGHT LOADS) 25mm / 1 PS43335 PS43301 OPS-SD PC08-030 2 BOLTS PIPE CLAMP (LIGHT LOADS) 30mm / 1 1/4 PS43336 PS43302 OPS-SD PC08-040 2 BOLTS PIPE CLAMP (LIGHT LOADS) 40mm / 1 1/2 PS43337 PS43303 OPS-SD PC08-050 2 BOLTS PIPE CLAMP (LIGHT LOADS) 50mm / 2 PS43338 PS43304 OPS-SD PC08-080 2 BOLTS PIPE CLAMP (LIGHT LOADS) 80mm / 3 PS43339 PS43305 OPS-SD PC08-100 2 BOLTS PIPE CLAMP (LIGHT LOADS) 100mm / 4 PS43340 PS43306 OPS-SD PC08-125 3 BOLTS PIPE CLAMP (LIGHT LOADS) 125mm / 5 PS43341 PS43307 OPS-SD PC08-150 2 BOLTS PIPE CLAMP (LIGHT LOADS) 150mm / 6 PS43342 PS43308 OPS-SD PC08-200 2 BOLTS PIPE CLAMP (LIGHT LOADS) 200mm / 8 PS43343 PS43309 39
Page 30 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 HDG SS Type Name Description art. no. Art.No. OPS-SD PC13-015 Clamp With Adjust.Bolted bracket. For 1/2 pipe PS43755 PS43750 OPS-SD PC13-020 Clamp With Adjust.Bolted bracket. For 3/4 pipe PS43756 PS43751 OPS-SD PC13-025 Clamp With Adjust.Bolted bracket. For 1 pipe PS43757 PS43752 OPS-SD PC13-030 Clamp With Adjust.Bolted bracket. For 1.1/4 pipe PS43758 PS43753 OPS-SD PC13-040 Clamp With Adjust.Bolted bracket. For 1.1/2 pipe PS43759 PS43754 OPS-SD PC13-050 Clamp With Adjust.Bolted bracket. For 2 pipe PS43761 PS43760 HDG SS Type Name Description art. no. Art.No. OPS-SD PC21-015 Clamp With Perf. Bend Plt. For 1/2 pipe PS44105 PS44100 OPS-SD PC21-020 Clamp With Perf. Bend Plt. For 3/4 pipe PS44106 PS44101 OPS-SD PC21-025 Clamp With Perf. Bend Plt. For 1 pipe PS44107 PS44102 OPS-SD PC21-030 Clamp With Perf. Bend Plt. For 1.1/4 pipe PS44108 PS44103 OPS-SD PC21-040 Clamp With Perf. Bend Plt. For 1.1/2 pipe PS44109 PS44104 OPS-SD PC21-050 Clamp With Perf. Bend Plt. For 2 pipe PS44111 PS44110 HDG SS Type Name Description art. no. Art.No. OPS-SD PC23-050 Clamp With Perforated Plt. For 2 pipe PS43905 PS43900 OPS-SD PC23-065 Clamp With Perforated Plt. For 2 1/2 pipe PS43906 PS43901 OPS-SD PC23-080 Clamp With Perforated Plt. For 3 pipe PS43907 PS43902 OPS-SD PC23-090 Clamp With Perforated Plt. For 3 1/2 pipe PS43908 PS43903 OPS-SD PC23-100 Clamp With Perforated Plt. For 4 pipe PS43909 PS43904 HDG SS Type Name Description art. no. Art.No. OPS-SD PS01-050 SHORT CLAMPED SHOE - 2 PS46020 PS46015 OPS-SD PS01-080 SHORT CLAMPED SHOE - 3 PS46021 PS46016 OPS-SD PS01-100 SHORT CLAMPED SHOE - 4 PS46022 PS46017 OPS-SD PS01-125 SHORT CLAMPED SHOE - 5 PS46023 PS46018 OPS-SD PS01-150 SHORT CLAMPED SHOE - 6 PS46024 PS46019 HDG SS Type Name Description art. no. Art.No. OPS-SD PS02-050 CLAMPED SHOE - 2 PS46224 PS46218 OPS-SD PS02-080 CLAMPED SHOE - 3 PS46225 PS46219 OPS-SD PS02-100 CLAMPED SHOE - 4 PS46226 PS46220 OPS-SD PS02-125 CLAMPED SHOE - 5 PS46227 PS46221 OPS-SD PS02-150 CLAMPED SHOE - 6 PS46228 PS46222 OPS-SD PS02-200 CLAMPED SHOE - 8 PS46229 PS46223 HDG SS Type Name Description art. no. Art.No. OPS-SD PS05-050 CLAMPED ADJUST. SHOE - 2 PS460773 PS46067 OPS-SD PS05-080 CLAMPED ADJUST. SHOE - 3 PS46074 PS46068 OPS-SD PS05-100 CLAMPED ADJUST. SHOE - 4 PS46075 PS46069 OPS-SD PS05-125 CLAMPED ADJUST. SHOE - 5 PS46076 PS46070 OPS-SD PS05-150 CLAMPED ADJUST. SHOE - 6 PS46077 PS46071 OPS-SD PS05-200 CLAMPED ADJUST. SHOE - 8 PS46078 PS46072 HDG SS Type Name Description art. no. Art.No. OPS-SD PS07-050 CLAMPED ADJUST. SHOE - 2 PS46043 PS46037 OPS-SD PS07-080 CLAMPED ADJUST. SHOE - 3 PS46044 PS46038 OPS-SD PS07-100 CLAMPED ADJUST. SHOE - 4 PS46045 PS46039 OPS-SD PS07-125 CLAMPED ADJUST. SHOE - 5 PS46046 PS46040 OPS-SD PS07-150 CLAMPED ADJUST. SHOE - 6 PS46047 PS46041 OPS-SD PS07-200 CLAMPED ADJUST. SHOE - 8 PS46048 PS46042 40
U-bolts ordering list: Type/dim: For Ø HDG SS mm: Art. no. Art. no. S-M UB- 1 /2 M6 23 1302347 1302403 S-M UB- 1 /2 M8 23 1302348 1302404 S-M UB- 3 /4 M8 28 1302349 1302405 S-M UB- 3 /4 M10281302350 1302396 S-M UB-1 M8 36 1302351 1302406 S-M UB-1 1 /4 M10 44 1302352 1302407 S-M UB-1 1 /2 M10 50 1302353 1302408 Type/dim: For Ø HDG SS mm: Art. no. Art. no. S-M UB-2 M10 62 1302354 1302409 S-M UB-2 M12 62 1302355 1302410 S-M UB-2 1 /2 M10 78 1302356 1302411 S-M UB-2 1 /2 M12 78 1302357 1302412 S-M UB-3 M12 91 1302358 1302413 S-M UB-3 1 /2 M12 102 1302359 1302414 S-M UB-4 M12 117 1302360 1302415 Universal Bracket For pipes/ HDG SS Weight Type U-bolts: Art. no. Art. no. SS (kg) PSU 110 1 /2-2 1302335 1302391 0,4 PSU 160 1-4 1302336 1302392 1,0 PSU 160 also can be used with 2 x 1 /2-1 pipes/u-bolts, one in each hole. Symbols for Steel Qualities: HDG = Hot Dip Galvanized NS/ISO 1461 t > 3mm Steel grade EN 10025-S355J2 t < 3mm Steel grade EN 10130 Grade DC01(235) SS = Stainless Steel Steel quality for SS AISI 316L / EN 1.4404 Also see our MultiGrid Support Catalogue for small bore pipes Contains all information needed for a safe, simple and fast installation. With only 4 parts it can cover all frame-solutions normally needed.. Drawing N/A. (All from Bulk-Mto) Pictures show easy, safe and solid solutions Easy instruction for best practise Pipe Support Standard Details included from ½ to 2 piping. (some references included) 41
MultiGrid System: Cover up to 70% of total Supports, all Disciplines included! Market Leader in Multidiscipline Support Systems MultiGrid Catalogue Download on our homepage www.oglaend-system.com or order it in A4 paper format 42
LOCATIONS HOLDING COMPANY Øglænd Industrier AS P.O. Box 133 NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 www.oglaend-system.com SUBSIDIARY Norway Øglænd System AS P.O. Box 133 NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 Fax sales office: + 47 51 78 81 61 Email: oglaend@oglsys.no www.oglaend-system.com Denmark Øglænd System AS Tel.: +45 86 88 66 66 Fax: +45 86 88 66 67 Email: oglaend-system@oglsys.dk Dubai (Middle East) Oglaend Industries Middle East Tel.: + 971 4 887 8134 Fax: + 971 4 887 8143 Mobile: + 971 50 55 86 183 Email: sales@oglaend.ae Malaysia Oglaend Industries SDN BHD Tel.: + 60 3 51 922 049 Fax: + 60 3 51 922 039 Mobile: + 60 1 26 85 57 65 Email: sales@oglaendind.com fraser@oglaendind.com The Netherlands Oglaend System BV Tel.: + 31 1804 14 204 Fax: + 31 1804 19 395 Email: rfq@oglaend-system.nl Russia (St. Petersburg) Oglaend System Russia Tel.: +7(812) 313 1580 Fax: +7(812) 313 1580 Email: info@oglsys.ru www.oglaend-system.ru Singapore (South East Asia) Oglaend System Singapore Pte. Ltd. Tel.: + 65 67 48 82 78 Fax: + 65 67 48 86 15 Email: oglaend.system@pacific.net.sg Sweden Ögländ System AB Tel.: + 46 40 45 74 60 Fax: + 46 40 45 67 25 Email: oglaend-system@oglsys.se UK Oglaend System UK Ltd. Tel.: + 44 121 552 9662 Fax: + 44 121 544 6627 Email: oglaend.system@oglsys.co.uk USA Oglaend System USA Tel.: +1 832 288 4452 Email: sales@oglsys-us.com Korea Oglaend System Korea Co Ltd Tel.: + 82 518 320 761 Fax: + 82 518 320 762 Email: oglaend@oglaend-system.co.kr SALES OFFICES Norway Øglænd System AS, Division Oslo: Tel.:+ 47 22 25 15 10 Fax: + 47 22 25 25 21 Øglænd System AS, Division Ålesund: Tel.: + 47 70 19 09 50 Fax: + 47 70 19 09 51 AGENTS - DlSTRlBUTORS Abu Dhabi Proserv Albadie LLC Tel.: + 971 26 27 73 70 Fax: + 971 29 27 79 72 Email: proserv@emirates.net.ae www.proserv.no Australia J. T. Day Pty. Ltd. Tel.: + 61 8 9303 2248 Fax: + 61 8 9303 2446 Email: enquiries@jtday.com.au www.jtday.com.au Brazil M.O.TECH do Brazil Tel.: + 55 21 2532 2101 Fax: + 55 21 2517 2437 Email: motech@motech.com.br www.motech.com.br Brunei Shinba Integrated Engineering Services Tel.: + 673 333-1489 Fax: + 675 333-6333 Email: info@shinbaies.com Canada Apel/CSA Enterprises Tel.: + 1 902 450 5647 Fax: + 1 902 450 5286 Email: urquhart@csarep.com www.csarep.com NOSO Ltd. Tel.: + 1 709 782 2645 Fax: + 1 709 782 0534 Email: mshinkle@coil.ca www.noso.ca Finland Elmarino - Shipping OY Tel.: + 358 22 54 61 00 Fax: + 358 22 54 62 76 Iceland Smith & Norland Tel.: + 354 52 03 000 Fax: + 354 52 03 011 Email: sminor@sminor.is www.sminor.is lndonesia PT. Multi Tarex MuIia Tel.: + 62 21 3983 5337 Fax: + 62 21 3983 5340 Email: agus@multitarex.co.id www.multitarex.com Italy Piemme Broker S.R.L. Tel.:+39 02 906 33621 Fax +39 02 906 32036 Email: m.maiandi@pmbroker.it www.pmbroker.it Malaysia Offshore Industries Sdn Bhd Tel.: + 60 3-9284 0613 Fax: + 60 3-9284 1051 Email: oisbkl@tm.net.my Poland Nd Service Sp. Z.O.O. Tel.: + 48 665 070 111 Email: wojciech.pedzich@ndservice.pl www.ndservice.pl Thailand Probity International Co Ltd. Tel.: + 66 2 710 6146 Ext. 107 Fax: + 66 2 710 6147 Email: ak@probity.co.th www.probity.co.th The Baltic States Bastini OÜ Tel.: + 372 660 5811 Fax: + 372 660 5812 Email: sales@bastini.ee Øglænd System AS, Division Trondheim: Tel.: + 47 73 80 99 70 Fax: + 47 73 80 99 77 Finn H&T Group Oy Tel.: +358 45 630 4004 Fax: +358 3 5752550 Email: teppo.kuivanen@finnhtgroup.fi www.finnhtgroup.fi Vietnam MT Corp. Tel.: + 848 821 0373 Fax: + 848 821 0358 Email: mail@mt-co.com * x * x HEAD OFFICE AND FACTORY SUBSIDIARIES AGENTS DISTRIBUTORS SALES OFFICES FABRICATION FACILITIES
Simply the BEST! This has been our motto since the company was founded in 1977. By living up to the motto we have become the market leader in our field worldwide. Oglaend System s goal is to develop systems that are better, simpler and more economic overall. Konsern/Holding company: Øglænd Industrier AS Datterselskap/Subsidiary: Øglænd System AS Hovedkontor fabrikk/head Office factory: P.O. box 133, NO-4358 Kleppe, Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60 Fax sales office: +47 51 78 81 61 44 www.oglaend-system.com Email: oglaend@oglsys.no 12.12