SABROE packaged ammonia heat pump

Ammonia - the natural choice Ammonia has a number of characteristics which make it the ideal refrigerant for future refrigeration purposes: Ammonia is the only refrigerant with no negative impact on the environment No ozone depleting potential (ODP) No global warming potential (GWP) A well-known and acknowledged refrigerant which has been used safely in refrigeration for more than 100 years Ammonia has the best thermodynamic efficiency A natural refrigerant which easily breaks down into nitrogen If refrigerant leaks should occur they will be easy to detect, as the distinct smell of ammonia serves as a natural built-in alarm It is inexpensive and significantly cheaper than other refrigerants

Why choose ammonia? What are the advantages? Known technology and plant design Better energy efficiency (COP) Better heat transfer coefficient Available and low-priced all over the world Non-mixable with oil Less sensitive to humidity in the plant Smaller compressor - same capacity Smaller heat exchangers - same capacity Smaller circulated quantity

SABROE Ammonia heat pump compressor The natural choice

The natural choice Sabroe ammonia 40 bar heat pump compressors Types HPO and HPC Features: Ammonia is an ozone-friendly refrigerant Heat pump systems reduce the CO 2 emission The series covers the entire water temperature range up to 70 C. Compared with CFC, HCFC and HFC systems you will gain the following advantages: - higher efficiency (COP) - reduced compressor size - smaller evaporators - smaller condensers - smaller pipe and valve dimensions Capacity range: 100-1500 kw (one compressor) Multiple applications HPC104-106-108S HPO 24-26-28

Sabroe packaged ammonia heat pumps: Advantages Compact design Small ammonia charge Evaporator and condenser in suitable materials Efficient closed oil and oil recovery system High COP and energy optimal solution even at part load First charge of PAO5(P100) full synthetic oil Unisab II - a complete control and monitoring system with external communication facilities Flooded system with ammonia gives an optimum thermal solution and secures an optimum operating economy Tested with ammonia before dispatch

EOL - End Of Line Test centre All units are tested with ammonia A capacity test is available as an option Specified performance is confirmed Trouble-free on-site start-up and operation Shorter and safer start-up and commissioning periods

Sabroe packaged ammonia heat pump: Application areas Dairies Ice rinks Airports Slaughterhouses Breweries Poultry industries District heating Process Industries

Applications Sabroe ammonia heat pump compressors are perfectly suited for a large number of applications, such as: Heat reclaim for hot/warm water production in ammonia refrigeration plants within the food industry (abattoirs, dairies, ice cream factories, fish processing, freeze drying, breweries, slaughter houses etc.) Condenser heat reclaim from refrigeration systems Upgrading of industrial waste heat for use in industrial processes, district heating, individual buildings, etc. Heat pump systems based on natural heat sources such as sea water, air and geothermal energy Special applications such as wood seasoning, fish drying, exhaust gas cooling in power plants, etc. Heating in ice rinks or other sports arenas. Hot water for baths and swimming pools.

One-stage heat pump unit: Example: Brewery/district heating Performance: Heating capacity 2131 kw Evaporating temperature +30ºC Sink temperature in/out 60/70ºC Condensing temperature 73.5 ºC Flow 187 m 3 /h COP 5.6 Shaft power 381 kw

Two-stage heat pump unit: Combined chiller - heat pump unit 65ºC 55ºC Performance: Cooling capacity 210 kw Sink temp. in/out 55/65ºC Water temp. in/out 15/8ºC Flow 25.5 m 3 /h Chilled water flow 26.1 m 3 /h Shaft power LP compressor 29 kw Heating capacity 290 kw Shaft power HP compressor 53 kw

Sabroe packaged ammonia heat pump: Cascade or water / one- or two-stage One-stage HPO26 Twin Two stage HPC108/SMC116 Twin One-stage HPO28 Twin

Sabroe packaged two-stage ammonia heat pump unit Two stage HPC108/SMC116 Twin Technical information Product-type : Heat pump Compressor type : Reciprocating compressors Electrical options: Heat exchangers : Plate heat exchangers / Terminal box shell & tube Control panel Refrigerant : R717, flooded Starter panel Capacity-range : 200 4000 kw (Low/high voltage, 50/60 Hz) Temperature range : 72 o C water temperature Variable speed control on condenser Softstarter Secondary media : Water Approval : PED, others on request Design-pressure : 40 Bar A

Sabroe packaged two-stage ammonia heat pump unit Technical information Two stage HPC108/SMC116 Twin Duty (Condenser) Media : 4000 kw / 72 O C : Water Number of compressors : 4 Power Voltage : 2x 250 kw / 2x 400 kw : 400 V

Sabroe packaged ammonia heat pump: Application areas

NSPAC HPC108S Traditional design of heat pump unit

Safe use of ammonia plants SABROE & YORK will support the use of natural refrigerants - invest and develop products for the purpose only! SABROE & YORK will support the use of R717 for many years to come - and is therefore reluctant to see this unique refrigerant fall into discredit due to lack of knowledge.