Kitchen Mounting Hardware Guide Updated 4/26/12 V8 Contents Controller & Bump Bar Integration Brackets... 2 Kiwi 2 Integration Bracket... 2 Quick Release Integration Bracket... 2 Kiwi 2 Integration Bracket with Bump Bar Mount... 4 Quick Release Integration Bracket with Bump Bar Mount... 4 Bump Bar Mounting Bracket... 5 Kiwi 2 Wall Mounting Bracket... 6 KC3 Wall Mounting Bracket... 6 Kitchen Hardware Mounting Options... 7 Standard Radial Arm... 7 Heavy Duty Radial Arm... 8 LCD Wall Mount Bracket... 9 LCD Wall Mount Bracket with 4 Inch Extension Arm... 9 LCD Counter Pole Mount... 10 Ceiling Mount... 11 Ceiling Mount Threaded Rod Assembly... 12 KC3 Controller Ceiling Mount Pocket System... 13 1
Controller & Bump Bar Integration Brackets Kiwi 2 Integration Bracket Part Number: P823F044K VESA Mount Pattern: 75 mm (VESA Arm) 75 & 100mm for VESA LCD Compatibility: Can only be used with Kiwi 2 controller Front Integration Bracket with Kiwi 2 Controller (Kiwi 2 not included in kit) Side Quick Release Integration Bracket 2
Part Number: P825F051K VESA Mount Pattern: 75 & 100 mm for both VESA Arm and LCD Compatibility: Can be used with both Kiwi 2 and KC3 Controllers Quick Release Integration Bracket (Monitor Mount Detached) Quick Release Integration Bracket (Monitor Mount Attached) Back of Quick Release Integration Bracket Quick Release Integration Bracket with KC3 Controller (KC3 Controller not included with kit) 3
Kiwi 2 Integration Bracket with Bump Bar Mount Part Number: P823F043K Compatibility: Works with Kiwi 2 Controller and the Bump Bar Kiwi 2 Integration Bracket with Bump Bar Mount. (Bump Bar not included with bracket) Quick Release Integration Bracket with Bump Bar Mount Part Number: P825F050K Compatibility: Can be used with Kiwi 2 or KC3 Kitchen controllers and the Bump Bar. Quick Release Integration Bracket with Bump Bar Mount. (Bump Bar not included with Bracket) 4
Bump Bar Mounting Bracket Part Number: MP10855 Compatibility: Can be used with both the Quick Release and Kiwi 2 Integration Brackets. Bump Bar Mounting Bracket Bump Bar Mounting Bracket with Bump Bar (Bump Bar not included with bracket) 5
Kiwi 2 Wall Mounting Bracket Part Number: MP10681 Compatibility: Works the Kiwi 2 only KC3 Wall Mounting Bracket Part Number: MP11128 Compatibility: Works with KC3 Kitchen Controller only 6
Kitchen Hardware Mounting Options Standard Radial Arm Part Number: OA10850 VESA Mount Pattern: 75 & 100 mm Operating Weight Range: 5 17 lbs Compatibility: Supports 75 & 100mm VESA patterns. Works with Kiwi 2 and Quick Release Integration brackets. Radial Arm Radial Arm Radial Arm Shown with 17 ' Monitor, Quick Release Integration Bracket, Bump Bar mount, KC3 Controller and Bump Bar Radial Arm Shown with 17 ' Monitor, Quick Release Integration Bracket, Bump Bar mount, KC3 Controller and Bump Bar 7
Heavy Duty Radial Arm Part Number: P822F015 VESA Mount Pattern: 75 & 100 mm Operating Weight Range: 9 24 lbs Compatibility: Supports 75 & 100mm VESA patterns. Works with Kiwi 2 and Quick Release Integration brackets. Can be used with the K1700 All in One Kitchen Controller. Refer to the pictures of OA10850 (above) for examples of mounting. Part numbers OA10850 & P822F015 include the necessary mounting hardware to mount in the above configurations. 8
LCD Wall Mount Bracket Part Number: OA00405 VESA Mount Pattern: 75 & 100 mm Maximum Supported Weight: 45 lbs Description: Black LCD wall mount. Adjustable tension at joints. Tilts up/down 30 and left/right 30. Pivot from portrait to landscape Compatibility: Supports 75 & 100mm VESA patterns. Works with Kiwi 2 and Quick Release Integration brackets. LCD Wall Mount Bracket with 4 Inch Extension Arm Part Number: OA00406 VESA Mount Pattern: 75 & 100 mm Maximum Supported Weight: 40 lbs Description: Black LCD wall mount with 4-inch extension arm. Adjustable joint tension. Tilts up/down 30 and left/right 30. Pivot from portrait to landscape. Compatibility: Supports 75 & 100mm VESA patterns. Works with Kiwi 2 and Quick Release Integration brackets. 9
LCD Counter Pole Mount Part Number: OA10784 VESA Mount Pattern: 75 & 100 mm Maximum Supported Weight: 25 lbs Description: The long pole mount quickly adjusts KPS height and angle with the release of the locking collar in the center and knobs at the top of the pole. The height can be adjusted from 23 to 39 inches. Internal cable routing allows cables to pass through counter or exit behind the mount. Compatibility: Supports 75 & 100mm VESA patterns. Works with Kiwi 2 and Quick Release Integration brackets. 10
Ceiling Mount Part Number: OA10758 VESA Mount Pattern: 75 & 100 mm Description: Ceiling Mount Bracket. Includes 2 plastic sleeves to cover frame and rod. Does not include controller or bump bar mounting brackets or integration brackets. Ceiling mount threaded Rod Assembly (OA10544) needed for installation. Compatibility: Can be used with the Kiwi 2 and Quick Release integration brackets. Can also be used with K1700 All In One Kitchen Controller. Parts Included with OA10758 Ceiling Mount Bracket Assembly (OA10758) installed. The bracket pieces included with OA10758 are silver. Not the black pictured here. 11
Ceiling Mount Threaded Rod Assembly Part Number: OA10544 Description: Ceiling Mount Threaded Rod Assembly. Includes 3/4' x 36 rod kit with nuts and washers. Compatibility: Used with Ceiling Mount Bracket (OA10758). Ceiling Mount Threaded Rod Assembly (OA10544) 12
KC3 Controller Ceiling Mount Pocket System Part Number: P825F900K Contents: OA10706 (Kitchen Controller Pocket), OA10707 (Bump Bar Arm), OA10758 (Ceiling Mount Bracket Assembly) Description: Ceiling Mount Pocket System. P825F900K contains three parts OA10706, OA10707, and OA10758. The Pocket Mount system allows the KC3 Kitchen controller and the bump bar to be mounted without the use of a Kitchen Integration bracket. Compatibility: Can only be used with KC3 Kitchen Controller. KC3 Controller Pocket Mount (OA10706) Bump Bar Mounting Arm (OA10707) Example Installation: Ceiling Mount Parts shown; P825F900K, OA10544. Monitor, Kitchen Controller, and Bump Bar. 13