Oxonia Active 150 (Coldsan) Description: Liquid, acidic disinfectant based on hydrogen peroxide/ peracetic acid for the food industry Product strengths: Particularly effective against all types of micro-organisms found in the food industry Low application concentration Low application temperature Properties Concentrate Appearance: Clear, colourless liquid * Storage stability: Solubility: -20 to 35 C, min. one year At 20 C miscible with water in any proportion Density: 1.12-1.14 g/cm 3 Viscosity (dynamic): 1.7 mpas (20 C) P content: 0.20 % N content: 0.00 % PES content: COD: Flash point: 15 % min. Not applicable Not applicable, do not heat above 40 C Temperature coefficient: 0.7 % / C Application solution ph: 2.6-2.8 (1 %, 20 C, deionised water) Conductivity: Foam characteristics: 0.285 ms/cm (1 %, 20 C, deionised water) Non foaming, suitable for CIP-systems * Parameters subject to incoming goods control
ph values ph-values (in relation to water hardness) Concentration 0 d 16 d 30 d Water 5.0 7.2 7.6 0.05 4.1 7.1 7.2 0.10 3.7 6.3 6.8 0.30 3.2 4.4 5.1 0.50 3.0 3.9 4.3 1.00 2.8 3.4 3.9 5.00 2.4 2.7 3.0 10.00 2.2 2.4 2.7 Compatibility: Oxonia Active 150 (Coldsan) is, under the application conditions described below, compatible with Metals Aluminium, stainless steel, tinned iron. Mild steel (St 37/2), copper and its alloys and galvanised iron show surface losses which remain within acceptable limits, but the stability of the sanitising solution is impaired. Short-term exposure is possible (see table of losses). As it is the case with all acidic/oxidative disinfectants, static disinfection should not be carried out due to the risk of pitting corrosion. Static solutions, high chloride content in the batch water and high temperatures favor pitting corrosion. Plastics PE, PP, rigid PVC, PTFE, PVDF, epoxide coatings (application solution) Higher concentrations and/or other plastic materials should be tested for their suitability in case of need.
Seals In view of the wide range of different seals, it is advisable to test their suitability in case of need. Corrosion. Corrosion test according to DIN 50905 Surface losses when using Oxonia Active 150 (Coldsan) expressed in g/m 2 per h at 20 C and 16 d Material 0.2 % 0.5 % 1.0 % Aluminium 99.5 0.00 0.00 0.00 Chrome nickel steel 1.4301 0.00 0.00 0.00 Chrome nickel steel 1.4401 0.00 0.00 0.00 Tinned iron 0.00 0.02 0.04 Galvanised iron 1.04 3.23 9.10 Iron steel 37/2 2.51 3.72 3.73 Copper (discolouration) 1.25 3.74 11.67 Brass (discolouration) 1.65 5.57 12.88 Microbiology: Bactericidal and fungicidal effect of Oxonia Active 150 (Coldsan): Sterilisation time in minutes using the modified DVG suspension test method (* DVG-protein loading = 10 % beef serum). Sterilisation time in minutes Test organisms Organism conc./ml inoculum without loading with protein loading * ) 0.05 0.1 0.05 0.1 0.05 0.1 0.05 0.1 Gram-positive bacteria Staphyloccus aureus ATCC 6538 1.1 x 10 8 5 5 5 5 5 5 5 5 Enterococcus faecium ATCC 10541 1.1 x 10 8 5 5 5 5 15 5 5 5 Listeria monocytogenes ATCC 20600T 1.0 x 10 8 5 5 5 5 15 5 5 5 Gram-negative bacteria Pseudomonas aeruginosa ATCC 15442 3.8 x 10 8 30 15 15 5 60 15 15 5 Proteus mirabilis ATCC 14153 4.2 x 10 8 15 5 5 5 60 30 15 5 Escherichia coli ATCC 10536 3.3 x 10 8 5 5 5 5 15 5 15 5 Salmonella typhimurium ATCC 13311 5.1 x 10 8 5 5 5 5 15 5 5 5 Yeasts Candida albicans ATCC 10231 9.8 x 10 7 60 15 30 5 >60 60 >60 15 Kluyveromycea lactis DSM 4394 2.0 x 10 7 5 5 5 5 5 5 5 5
Sterilisation time in minutes Test organisms Organism conc./ml inoculum without loading with protein loading * ) 0.05 0.1 0.05 0.1 0.05 0.1 0.05 0.1 Moulds Geotrichum candidum DSM 1240 B hl fl DSM 1808 4.4 x 10 7 5 5 5 5 30 5 5 5 0.25 0.5 0.25 0.5 0.25 0.5 0.25 0.5 Aspergillus niger ATCC 16404 1.9 x 10 7 >60 60 60 15 >60 60 60 15 Ecology: Oxonia Active 150 (Coldsan) is particularly suitable because only small traces of acetic acid or its salts remain in the waste water after the reaction with organic material. Application Oxonia Active 150 (Coldsan) is a fast sanitising, bactericial, fungicidal, sporicidal, virucidal disinfectant based on hydrogen peroxide/ peracetic acid for the food industry. The contact time of the Oxonia Active 150 (Coldsan) solution is dependent on concentration, temperature and specific field of application. Concentration: 0.2-1 % Temperature: 15-30 C Increased disinfecting Concentration: 0.2-0.3 % efficiency / shorter Temperature: 40 C max. contact time Final rinse with water of drinking water quality, ensuring all soil and product residues are completely removed. For stabilising reasons, higher temperatures should generally be avoided, as they do not improve the sterilising effect of Oxonia Active 150 (Coldsan).
The application indications are assumed values to our experiences and may be corrected, depending on specific application conditions. Monitoring Concentration determination Titration Receiving flask: 100 ml application solution Titration solution: 0.1 n sodium thiosulphate solution + 0.1 n potassium permanganate solution, sulfuric acid Indicator: Potassium or sodium iodide, starch solution (1 %) Volume added of potassium permanganate in ml x 17 = concentration hydrogen peroxide in mg/l (= ppm) Volume added of sodium thiosulphate in ml x 38 = concentration peracetic acid in mg/l (= ppm) Please note the difference between total oxygen- and peracetic acid determination. To evaluate the efficacy of Oxonia Active 150 (Coldsan), the peracetic acid content in the application solution is of major importance. Conductivity The specific conductivity of Oxonia Active 150 (Coldsan) is usually insufficient for control via conductivity. For conductance control of Oxonia Active 150 (Coldsan) we recommend the addition of Horolith PA (see product data sheet Horolith PA).
Concentration control Dosage of Oxonia Active 150 (Coldsan) can be volumeproportional to the water flow for CIP-systems and cyclic for continuous systems. With the use as disinfectant to avoid reinfection in bottle washing machines we recommend to install the dosage at the delivery side of the circulating pump of cold water volume-proportional to fresh water. We recommend the use of P3- Elados EMP-diaphragm pumps for metering and the use of inductive conductivity units, e.g. P3-LMIT 08 for phase separation of the application solution of Oxonia Active 150 (Coldsan). Our P3-System brochures are available on request. Safety Oxonia Active 150 (Coldsan) is labelled as "Corrosive" (symbol "C") and "Oxidising" (symbol "O"); it contains peracetic acid, hydrogen peroxide and acetic acid. For cautionary and first aid information, consult the material safety data sheet on the product label. Consult your Ecolab representative for specific use instructions and recommended equipment. The information in this brochure corresponds to our current knowledge and experience. It is not legally binding assurance of defined properties or of the suitability for a definite purpose. Further, in view of numerous parameters that can influence the use of our products, it does not exonerate the user from liability for finding out the suitability of the products and the corresponding safety measures to be taken. Moreover, a possible infringement of patent rights must be avoided. (Food and Beverage P3, May 2003) Ecolab Ltd Duke Avenue Stanley Green Cheadle Hulme Cheadle Cheshire SK8 6RB www.ecolab.com Food & Beverage Division