Deploying Adobe Packages with Microsoft System Center Configuration Manager 2012

Deploying Adobe Packages with Microsoft System Center Configuration Manager 2012

1 2012 Adobe Systems Incorporated and its licensors. All rights reserved. Deploying Adobe Packages with Microsoft System Center Configuration Manager This version of the Help content may not contain trademark and copyright notices that will appear in the commercially available version of the Help content. This user guide is protected under copyright law, furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Adobe Systems Incorporated. Adobe Systems Incorporated assumes no responsibility or liability for any errors or inaccuracies that may appear in the informational content contained in this guide. This user guide is licensed for use under the terms of the Creative Commons Attribution Non-Commercial 3.0 License. This License allows users to copy, distribute, and transmit the user guide for noncommercial purposes only so long as (1) proper attribution to Adobe is given as the owner of the user guide; and (2) any reuse or distribution of the user guide contains a notice that use of the user guide is governed by these terms. The best way to provide notice is to include the following link. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/ Adobe, the Adobe logo, Acrobat, Flash, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries. Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Updated Information/Additional Third Party Code Information available at http://www.adobe.com/go/thirdparty. Adobe Systems Incorporated, 345 Park Avenue, San Jose, California 95110, USA. Notice to U.S. Government End Users: The Software and Documentation are "Commercial Items," as that term is defined at 48 C.F.R. 2.101, consisting of "Commercial Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7202-4, as applicable, the Commercial Computer Software and Commercial Computer Software Documentation are being licensed to U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein. Unpublished-rights reserved under the copyright laws of the United States. Adobe agrees to comply with all applicable equal opportunity laws including, if appropriate, the provisions of Executive Order 11246, as amended, Section 402 of the Vietnam Era Veterans Readjustment Assistance Act of 1974 (38 USC 4212), and Section 503 of the Rehabilitation Act of 1973, as amended, and the regulations at 41 CFR Parts 60-1 through 60-60, 60-250, and 60-741. The affirmative action clause and regulations contained in the preceding sentence shall be incorporated by reference.

2 Contents Preparation... 4 To create a package and program... 5 To deploy a package and program... 7

3 This document guides you through the process of creating a SCCM 2012 package to deploy an Adobe deployment package. Since both Adobe and Microsoft use the term package and since there are currently two versions of the Microsoft software in use, we use the following naming conventions for clarity in this chapter: When referring to a package created with SCCM 2012, we say SCCM package unless the context is very clear, when we may say just package. When referring to a package created by the Adobe Application Manager, Enterprise Edition we say Adobe deployment package or Adobe package. We never use the term package alone to mean an Adobe package.

4 Preparation SCCM was designed for a great variety of network configurations. The best choice of deployment configuration for the Adobe package and its product install folder is the TS option, where the Adobe package and its product install folder are placed together on the same distribution server or servers. When you create a package for deployment in Windows, the Adobe Application Manager Enterprise Edition creates two folders in your specified Save to location, Exceptions\ and Build\. The Exceptions\ folder contains folders with installers of various kinds (EXE, AIR, MSI) that cannot be deployed using the main MSI installer (because it cannot contain an embedded installer). Therefore, these are deployed using Exception Deployer present in the same folder. You must create separate SCCM installers to run Exception Deployer either in pre or post mode. The folder can be empty if your package has no dependencies on other installers. The Build\ folder contains an MSI file whose filename uses the Package Name that you specified, and two subfolders, ASU\ and Setup\. The subfolders are required to run the MSI file and install the product successfully. NOTE: The packages created by the Adobe Application Manager Enterprise Edition silently use the Adobe installer subsystem, which in turn uses the native Windows installer, MSI. Therefore, you cannot wrap an Adobe install package inside of a Windows package for use with MSI because Windows prohibits such a recursive use of MSI.

5 To create a package and program 1. In the Configuration Manager console, click Software Library. 2. In the Software Library workspace, expand Application Management, and then click Packages. 3. In the Home tab, in the Create group, click Create Package. 4. On the Package page of the Create Package and Program Wizard, specify the following information: o Specify Name for the package with a maximum of 50 characters. This field is mandatory. o Description, Manufacturer, Language, Version fields are optional. o Check This package contains source files. Click Browse to open the Set Source Folder dialog box where you can specify the type of path you want to use (UNC or local) and browse for or type in the path to the Build\ folder that contains the <packagename>.msi file and supporting folders. Click OK. Note: The computer account of the site server must have read access to the source folder you specify. 5. Back on Package page of the Create Package and Program Wizard, the path you just selected will be displayed in the Source folder field. Click Next. 6. On the Program Type page of the Create Package and Program Wizard, select Standard program option and click Next. Note: Select Do not create a program option if you want to create package and don t want to create a program. To create a new program for an existing package, select the package and then, in the Home tab, in the Package group, click Create Program to open the Create Program Wizard. 7. On the Standard Program page of the Wizard, specify the following information: Name: Specify a name for the program with a maximum of 50 characters. Note: The program name must be unique within a package. After you create a program, you cannot modify its name. Command Line: Click Browse. In the Open File dialog, choose the file type All Files (*.*), then browse to and select the MSI file. The details of this step may vary for each command you create. Back on the Standard Program page of the Wizard, append appropriate flags or options to the command after the filename in the Command Line text box. You can use the /quiet flag for unattended installation. Use the following commands: a. For installing main Msi : msiexec.exe /i PS_1.msi /quiet

6 b. For uninstalling main Msi : msiexec.exe /x PS_1.msi /quiet c. For installing exception deployer in pre mode: ExceptionDeployer.exe --workflow=install --mode=pre d. For installing exception deployer in post mode: ExceptionDeployer.exe --workflow=install --mode=post Startup folder field is optional. Run: Specifies the mode in which the program will run on client computers. Program can run: Specify whether the program can run only when a user is logged on, only when no user is logged on, or whether or not a user is logged on to the client computer. Run mode: Specify whether the program will run with the logged on users permissions or with administrative permissions. Be sure that Allow users to view and interact with the program installation option is unchecked. Drive mode: Select Run with UNC name option. Reconnect to distribution point at log on: Specifies that the client computer reconnects to the distribution point when the user logs on. By default, this check box is disabled. 8. Set fields on Requirements page of the Create Package and Program Wizard as appropriate and click Next. 9. Review the information on the Summary screen. If you need to change anything, go back and do it now. Then, from this screen, click Next. 10. The Completion screen will appear. Click Close to terminate program creation.

7 To deploy a package and program 1. In the Configuration Manager console, click Software Library. 2. In the Software Library workspace, expand Application Management and then click Packages. 3. Select the package that you want to deploy and then, in the Home tab, in the Deployment group, click Deploy. 4. On the General page of the Deploy Software Wizard, specify the name of the package and program you want to deploy, the collection you want to deploy the package and program to, and optional comments for the deployment. Select Use default distribution point groups associated to this collection if you want to store the package content on the collections default distribution point group. If you have not associated the selected collection with a distribution point group, this option will be unavailable. 5. On the Content page of the Wizard, click Add and then select the distribution points or distribution point groups to which you want to deploy the content associated with this package and program. Click Next. 6. Set fields on Deployment Setting page of Deploy Software Wizard as appropriate and click Next. 7. Configure Scheduling page of the Wizard appropriately. The options on this page will differ depending on whether the deployment action is set to Available or Required. Note: Deployment with an intent of Required must have an assigned schedule specified. Click New and select appropriate option on Assignment schedule dialog. 8. If the deployment purpose is set to Required, select a rerun behaviour for the program from the Rerun behaviour drop-down list. 9. Set fields on User Experience page of the Wizard as appropriate and click next. 10. On the Distribution Points page of the Wizard, specify the following information: Deployment options: Specify the actions a client should take to run program content. You can specify behaviour when the client is in a fast network boundary or a slow or unreliable network boundary. Check Allow clients to share content with other clients on the same subnet. Uncheck Allow clients to use a fallback source location for content. 11. On the Summary page of the Wizard, review the actions that will be taken and then complete the Wizard. You can view the deployment in the Deployments node of the Monitoring workspace and in the details pane of the package deployment tab when you select the deployment.