Stang Remote Control Monitors

Stang Remote Control Monitors Stang Remote Control Monitors (RCM) are used to flow large volumes of water which are controlled from a remote location. These monitors can be applied almost anywhere and can be operated by anyone from a remote location. ranges vary for horizontal and vertical for flexibility and smooth control. Monitors can be stand alone or part of a monitor network with multiple units operated at once from a singular control panel. 42 43

ELECTRIC SYSTEMS HYDRAULIC SYSTEMS Features & Benefits Stang Remote Control Monitors (RCM) are used to flow large volumes of water and can be controlled from a remote location on land or at sea. Remote monitors are used when the installation is in a risk area or the operator cannot access the equipment. These monitors typically have a fixed control panel in a strategic area that allows for safe operation. Monitors can be stand alone or part of a monitor network with multiple units controlled from one control panel. Remote Control Monitors require a method to accomplish control from a location away from the monitor. This holds true for either electric monitors or hydraulic. The operator interface is either a master control panel, local control panel, wireless transmitter or integrated into a plant I&E system. Stang has the experience to work with any type of control scheme that may be required. We can even tie into remote site control (SCADA). Where electricity may pose a hazard due to environment or accessibility issues hydraulic powered units become the optimum power source for remote system operations. Stang s hydraulic power units are highly engineered to supply efficient remote location power without the need for electrical power. No electrical power source is required for the normal operation of this equipment. Powered Efficient Safe Design Indoor / Outdoor Rated Explosion Proof Available 1, 2, 3 or 4 Monitor System 1.5 Connection 3 Discharge Electrical System Example Starter Module System Example Nozzle Monitor Power-in Remote Valve Hose Manifest Valve Wireless Communication Water Main Remote Control Panel (RCP) Communication Wire (2 wires) RCM Control Module HPU On/Off Valve Local Control Panel (LCP) Monitor Nozzle Valve Water Main Communication Signals Control Room (Master Panel/ MCP) Local Control Panel (LCP) Pump Unit (HPU) Water Source Optional Foam Multicore Line Typical Industries Typical Industries Custom Custom 44 Marine Petrochemical Marine Petrochemical 45

915 REMOTE 1.5 SLP Electric Monitor 1.5 500 140 1.5" Reach Chart 500 1892 150 10 130 120 110 100 90 80 70 120 100 80 0 50 100 150 200 250 300 350 Rate () 16 7 20 510 +/-50 2 13 483 tested @ 300psig Stang s 1.5 Super Pro DC monitors are highly compact water delivery cannons with a 1.50 waterway. Available with various inlet options this unit can be mounted just about anywhere. This unit may be supplied with a control module that has a joystick and control for a optional fog nozzle. [See Below] 50 89.69 140 140 177.30 Motor Wiring 207.18 horizontal rotation axis. The rotation comes from either two 12 or 24 VDC motors. There are 4 proximity switches that limit the angular travel and are preset by the factory. Proximity switches can be relocated by the customer. Junction Box + Joystick Not Included See Control Section (Pg 116) 1.5 NPT (M) or (F) 2.5 NPT (M) or (F) Material 12V DC Sensor Wiring 24V DC 12 Volt 24 Volt 46 1.5" Electric Fog Nozzle (Pg. 106) 1.5 Shapertip Nozzle (Pg. 106) 1.5 Stream Shaper (Pg. 106) 47

925 REMOTE 2.5 Super Pro Monitor 2.5 1000 320 240 220 2.5" Reach Chart 1000 3780 150 10 200 180 160 140 120 120 100 80 100 100 200 300 400 500 600 700 800 900 1000 1100 Rate () 35 16 21 530 +/-70 320 30 750 tested @ 300psig Stang s 2.5 Super Pro DC monitors are highly compact water delivery cannons with a 2.5 waterway. Available with various inlet options this unit can be mounted just about anywhere. This unit may be supplied with a control module that has a joystick and control for an optional fog nozzle. [See Below] 70 3.75 4.10 2.87 320 Junction Box horizontal rotation axis. The rotation comes from either two 12 or 24 VDC motors. There are 4 proximity switches that limit the angular travel and are preset by the factory. Prox switches can be changed by the customer. Junction Box + Joystick Not Included See Control Section (Pg 116) 2.5 NPT (M) or (F) Material 12V DC 24V DC 12 Volt 24 Volt Shapertip Nozzle Electric Fog Fog 48 49 (Pg. 90) (Pg. 96) (Pg. 95)

930 REMOTE 3 Super Pro Monitor 3 1250 260 250 240 230 220 210 200 190 180 170 3" Reach Chart 120 100 80 300 500 700 900 1100 1300 Rate () 1250 60 27 4730 38 940 150 10 +/-40 23 585 tested @ 300psig Stang s 3 Super Pro monitors are highly compact water delivery cannons with a 3 waterway & 2.5 NH outlet or 3 flanged at the customers request. 9.44 6.76 10.20 The welded single waterway design allows for an efficient & performance enhanced flow as well as a heavy duty construction. horizontal rotation axis. is controlled via a worm gear driven swivel powered by gear reduced AC motors or direct drive hydraulic motors. range is accomplished via 4 adjustable proximity switches and give the customer the option to set the needed range. These monitors are available with various intake options. 40 2.5 NH Male Threaded Material 50 Shapertip Nozzle (Pg. 90) Electric Fog (Pg. 96) Fog (Pg. 95) 51

940 REMOTE 4 Super Pro Monitor 4 3500 340 320 4" Reach Chart 3500 13200 150 10 300 280 260 240 120 220 100 80 200 500 1000 1500 2000 2500 3000 3500 4000 Rate () 110 50 48 1220 +/-45 32 810 tested @ 300psig Stang s 4 Super Pro monitors are highly compact water delivery cannons with a 4 waterway & 4 NH outlet or 4 flanged at the customers request. The welded single waterway design allows for an efficient & performance enhanced flow as well as a heavy duty construction. horizontal rotation axis. is controlled via a worm gear driven swivel powered by gear reduced AC motors or direct drive hydraulic motors. range is accomplished via 4 adjustable proximity switches and give the customer the option to set the needed range. These monitors are available with various intake options. 52 Shapertip Nozzle Electric Fog Fog 53 8.29 45 4 NH Male Threaded Material 7.57 (Pg. 91) 15.13 (Pg. 97) 11.56 (Pg. 99)

960 REMOTE 6 Super Pro Monitor 6 7000 410 390 6" Reach Chart 7000 26500 150 10 370 350 330 310 120 290 100 270 80 250 2000 3000 4000 5000 6000 7000 8000 Rate () 740 335 24 610 +/-45 31 790 tested @ 300psig Stang s 6 Super Pro monitors are highly compact water delivery cannons with a 6 waterway & 6 flanged outlet (threaded option available). options vary depending on application. The welded single waterway design allows for an efficient & performance enhanced flow as well as a heavy duty construction. horizontal rotation axis. is controlled via a worm gear driven swivel powered by gear reduced AC motors or direct drive hydraulic motors. range is accomplished via 4 adjustable proximity switches and give the customer the option to set the needed range. Dual outlet also available to customers needing foam applications. Our dual SLP monitors feature a changeover mechanism designed for foam systems. 54 Shapertip Stream Shaper Manual Fog 55 45 8.38 Material 12.00 6 NH Male Threaded 20.00 (Pg. 101)

980 REMOTE 8 Super Pro Monitor 8 11000 500 8" Reach Chart 11000 41700 180 13 450 400 350 120 300 100 80 250 5000 7000 9000 11000 13000 Rate () 864 390 34 865 +/-45 35 890 tested @ 300psig Stang s 8 Super Pro monitors are highly compact water delivery cannons with a 8 waterway & 8 flanged outlet (threaded option available). options vary depending on application. The welded single waterway design allows for an efficient & performance enhanced flow as well as a heavy duty construction. horizontal rotation axis. is controlled via a worm gear driven swivel powered by gear reduced AC motors or direct drive hydraulic motors. range is accomplished via 4 adjustable proximity switches and give the customer the option to set the needed range. Dual outlet also available to customers needing foam applications. Our dual SLP monitors feature a changeover mechanism designed for foam systems. 56 Shapertip Stream Shaper Fog 57 45 [89] 3 8 NH Male Threaded Material [368] 15 [421] 17 [197] 8 (Pg. 102)

910 REMOTE 10 Pro Monitor 10 15000 500 480 460 440 420 400 380 360 340 320 300 10" Reach Chart 120 100 80 8000 10000 12000 14000 16000 Rate () 15000 1030 56800 470 50 1270 180 13 +70 /-10 52 1320 tested @ 300psig Stang s 10 Pro monitors are water delivery cannons that feature a low profile designed waterway & 10 flanged outlet options. options vary depending on application. The welded single waterway design allows for an efficient & performance enhanced flow as well as a heavy duty construction. horizontal rotation axis. is controlled via a worm gear driven swivel powered by gear reduced AC motors or direct drive hydraulic motors. range is accomplished via 4 adjustable proximity switches and give the customer the option to set the needed range. Dual outlet also available to customers needing foam applications. Our dual SLP monitors feature a changeover mechanism designed for foam systems. 58 Shapertip Stream Shaper 59 10 70 Material 23.47 23.47 44.20 46.07

916 REMOTE 16 Super Pro Monitor 16 21000 320 530 510 490 470 450 430 410 390 370 350 16" Reach Chart 120 100 80 12000 14000 16000 18000 20000 22000 Rate () 21000 3490 80000 1580 50 1270 220 15 +/-60 320 68 1730 tested @ 300psig 160 40.77 60 160 29.00 60 Stang s 16 Super Pro monitors are highly compact water delivery cannons with a 16 waterway & 16 flanged outlet. The welded single waterway design allows for an efficient & performance enhanced flow as well as a heavy duty construction. horizontal rotation axis. is controlled via a worm gear driven swivel powered by gear reduced AC motors or direct drive hydraulic motors. range is accomplished via 4 adjustable proximity switches. The maximum movement of the monitor can be adjusted by moving the stops or proximity switch (dependent on model) on both rotation and elevation. The monitor should be rotated carefully through its arcs with the monitor at its maximum and minimum positions, to check that the monitor does not impact with itself or with any part of the superstructure and that no part of the ship can be struck by the water jet. The monitor outlet shown has a two stage nozzle comprising of the flow straighter & shaper tip with finger blabber. Material Shapertip Stream Shaper 61

1111 REMOTE 4 Underwharf Monitor GALLERY 19.88 37.18 13.51 Stang is one of the only manufacturers of this style of monitor for the FIFI market. Our 4 Underwharf Monitor is hydraulically controlled water monitor that has vertical and horizontal rotation. The welded single waterway design allows for an efficient & performance enhanced flow as well as a heavy duty construction. and horizontal rotation is controlled via hydraulic motors. Features 316 SS Stainless Steel Corrosion Resistant Materials Used Throughout : 1500-3000/ 340-680 M³/H Operating : 50-150/ 3.5-10.3 4 150#RF Flange Adjustable Stop Plate 9.94 *Size shown not to scale 62 63