ENGINE FUNDAMENTALS. Name Date Score _. Write the letter of the answer in each blank provided.



Similar documents
EXPERIMENT NO. 3. Aim: To study the construction and working of 4- stroke petrol / diesel engine.

Pollution by 2-Stroke Engines

KNOWLEDGE AND EMPLOYABILITY AUTO MECHANICS GRADES 8 AND 9

AUTOMOTIVE GAS OIL. Robert Shisoka Hydrocarbon Management Consultancy

SV710-SV740. SV810-SV840 Owner's Manual

1The Automobile. Introduction to Automotive Technology. Section 1

SLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3

Job Hazard/Safety Analysis For the Plumber

EL DORADO UNION HIGH SCHOOL DISTRICT Educational Services ADVANCED AUTOMOTIVE TECHNOLOGY (541) Trades & Industrial Education

Principles of Engine Operation

As you learned in the previous activity, energy is either potential energy or kinetic energy. Each can take many forms.

AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District

Marine Piston Damage By Tom Benton, Marine Surveyor

EFFECT. DATE: 01/13/1991 SERIES PURPOSE: The purpose of the automotive mechanic occupation is to repair & maintain cars, trucks & equipment.

Occupational Health Program Safety Training Series. Lockout/Tagout Safety Awareness Training

The Use of Exhaust Gas Recirculation (EGR) Systems in Stationary Natural Gas Engines. The Engine Manufacturers Association August 2004

Lockout - Tagout. Control of Hazardous Energy OSHA Standard

SAN DIEGO COMMUNITY COLLEGE DISTRICT MIRAMAR COLLEGE ASSOCIATE DEGREE COURSE OUTLINE

OD1619 PRINCIPLES OF INTERNAL COMBUSTION ENGINES

CLASSIFICATION OF INTERNAL COMBUSTION ENGINES VARIOUS TYPES OF ENGINES

Intake Manifold: Service and Repair

The Relation Between Gasoline Quality, Octane Number and the Environment

Exhaust emissions of a single cylinder diesel. engine with addition of ethanol

STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES

Diesel: Troubleshooting

Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis

Fleet Technician I Fleet Technician II Fleet Technician III

MAINTENANCE OF WHEELMOVE IRRIGATION SYSTEMS

EXPERIMENTAL VALIDATION AND COMBUSTION CHAMBER GEOMETRY OPTIMIZATION OF DIESEL ENGINE BY USING DIESEL RK

Emission report Honda accord/cu1

Cylinder Leak- Down Tester

Engineering, Bharathiyar College of Engineering and Technology, Karaikal, Pondicherry , India

Turbocharger system components, servicing

Guardian Fire Safety Solutions FIRE RISK CONTROL IN WELDING FUME EXTRACTION SYSTEMS

INTERNAL COMBUSTION (IC) ENGINES

MECHANICAL ENGINEERING EXPERIMENTATION AND LABORATORY II EXPERIMENT ENGINE PERFORMANCE TEST

Handling and Application Information

Job Hazard/Safety Analysis For the Housekeeper

Job Hazard/Safety Analysis For the Building Maintenance Worker

Questions and Answers

Implications. removing sulphur in. Diesel & Gasoline. Under. Euro IV fuel regime

MCI 35.80a AUTOMOTIVE ENGINE MAINTENANCE AND REPAIR MARINE BARRACKS WASHINGTON, D.C.

Air Induction Systems

The Ogunmuyiwa Engine Cycle

Oxy-Fuel Gas Welding. Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to:

INTERNAL COMBUSTION RECIPROCATING PISTON ENGINES

Jing Sun Department of Naval Architecture and Marine Engineering University of Michigan Ann Arbor, MI USA

1/ Prevention of Valve-Seat Recession in European Markets, McArragher, Clark & Paesler, CEC/93/EF19, May 1993.

Hydrogen as a fuel for internal combustion engines

Consumers consider the purchase of a vehicle to be their second largest expenditure, and therefore they demand

Forename: Surname: School / College/ Institution. Course date: / / RDTHSC:

Installation Instructions for Alarm Module Kit A043F059

Austin High School Automotive Service Technology Engine Repair 9 th grade Course Syllabus

Air filter: A paper or synthetic fabric baffle that captures dust, dirt and debris from the airstream entering the engine.

Apprenticeship Training Standard. Automotive Service Technician. Trade Code: 310S

Analytical Report on Consumer Gasoline Choices

Perfectly Adapted. ISL Euro 6 Gas Engine PS

Mechanical Systems Competency 1.20

Maintenance and Light Repair IV (MLR IV)

3/5/2015. Oil Analysis Tests. Lubricating Oils. Six Functions of Lubricating Oil

Alternative to Fossil Fuel

A.Pannirselvam*, M.Ramajayam, V.Gurumani, S.Arulselvan and G.Karthikeyan *(Department of Mechanical Engineering, Annamalai University)

Compressed Gas Cylinders Safety Policy

Fire Security Systems

Elements of Physics: Energy, Work, and Power Teacher s Guide

Effect of magnetic field on performance and emission of single cylinder four stroke diesel engine

Motor Vehicle Mechanical Repair and Service

Pressure Vessels (Air Compressors) and LPG Tanks

AUTOMOTIVE TECHNOLOGY (ATECH)

Compressed Gas Cylinder Storage and Handling Guide

Compressed Gas Cylinder Safety

Vectra Caravan kW/122hp 5-speed station wagon 5 doors 1

WEEKLY SAFETY MEETING All Euramax Subsidiaries WELDING SAFETY / HOT WORK SAFETY. Safety Meeting Contents. Meeting Notice.

AVIATION SCIENCE LESSON 6: FUEL PUMPS AND FUEL SYSTEMS. Paul Ladegard, Alan Dick

FS Lubricants. Oil Analysis Program

ENTRY-LEVEL AUTOMOTIVE TECHNICIAN

AIR POWERED ENGINE INTRODUCTION. Pramod Kumar.J Mechanical Engineer, Bangalore, INDIAs

DOE FUNDAMENTALS HANDBOOK MECHANICAL SCIENCE Volume 1 of 2

The 2.0l FSI engine with 4-valve technology

B Dinesh Prabhu, Asst. Professor, P E S College Engg., Mandya, KARNATAKA 1

Ethanol Vehicle and Infrastructure Codes and Standards Citations

Take care with oxygen Fire and explosion hazards in the use of oxygen

Vehicle Fire Protection. An Ownerʼs Manual for ANSUL Fire Suppression/Detection Systems

Engine Heat Transfer. Engine Heat Transfer

Automotive Base Oil Presentation

Engine Friction and Lubrication

Diesel-to-Natural Gas Engine Conversions. A cost-effective alternative to new natural gas vehicles

Police Fleet Technician

Continuous flow direct water heating for potable hot water

Present Scenario of Compressed Natural Gas (CNG) as a Vehicular fuel in Bangladesh

Diesel Engine Fundamentals Course# ME406

Section 11 - System Diagrams

SCREAMIN' EAGLE PRO TWIN CAM 110 (1800 CC) BOLT-ON CON- VERSION KIT

Understanding Tier 4 Interim and Tier 4 Final EPA regulations for generator set applications

Job Hazard/Safety Analysis For the Paint & Finish Worker

Notes. Material 1. Personal Protective Equipment 2.

Job Hazard/Safety Analysis For the Lab Worker

CFD Simulation of HSDI Engine Combustion Using VECTIS

Section 6 - System Diagrams

Transcription:

WRITTEN TEST UNDERSTANDING 1 ENGINE FUNDAMENTALS Name Date Score _ INSTRUCTIONS Write the letter of the answer in each blank provided. OBJECTIVE 1 List safety hazards associated with engine performance work. 1. Which of the following lists of injuries are associated with engine performance work? A. allergic reactions, electrical shock, exposure to toxic materials B. electrical shock, exposure to toxic materials, muscle strains, hearing loss C. cuts, electrical shock, exposure to toxic materials, muscle strains D. cuts, electrical shock, repetitive motion injuries, exposure to toxic materials OBJECTIVE 2 List chemicals related to automotive engine service that contain hazardous materials. 2. Which of the following is NOTa chemical related to automotive engine service that contains hazardous materials? A. battery acid B. carburetor cleaners C. gasoline additives D. injector solutions 3. Which of the following is NOTa chemical related to automotive engine service that contains hazardous materials? A. antifreeze gases C. compounds used to free valve lifters D. salt TEACHER MATERIALS - Engine Periormance Specialist WRIDEN TEST - CIMC - 1-17

OBJECTIVE 3 List the names of the major engine systems. 4. Which of the following is a TRUE list of the major engine systems? A. ignition system, lubrication system, cooling system. charging system B. starting system. heating system. charging system. exhaust system C. fuel system. lubrication system, fluid system, sound system D. ignition system, charging system, fluid system, exhaust system OBJECTIVE 4 Describe the functions of the major engine systems. 5. Which of the following systems provides the spark to burn the fuel? A. charging system B. fuel system C. ignition system D. starting system 6. True or False: The exhaust system reduces friction and cleans the engine. 7. True or False: The starting system also charges the battery. OBJECTIVE 5 List the three elements that must be present in order for combustion to occur. 8. Which of the following elements is NOT necessary in order for combustion to occur? A air B. hydrocarbons C. fuel D. heat May De photocopied for student USB. WRITTEN TEST - CIMC - 1-18

OBJECTIVE 6 List the four strokes of an internal combustion engine in the order of their occurrence. 9. Which of the following lists in order of occurrence the four strokes of an internal combustion engine?, intake, power, exhaust B. intake, power, compression, exhaust, compression, power, exhaust, compression, intake, exhaust OBJECTIVE 7 Using illustrations of cylinders, sketch the spark in the correct engine stroke. 10. During which of the following engine strokes is spark delivered to create combustion? OBJECTIVE 8 Using illustrations of cylinders, sketch the piston in the correct position for each of the four engine strokes. 11. For the figure below, identify the engine stroke indicated by the number 3. 1. 2. 3. 4. WRITTEN TEST - CIMC - 1-19

".-:- 12. For the figure below, identify the engine stroke indicated by the number 4. 1. 2. 3. 4. OBJECTIVE 9 Using illustrations of cylinders, draw an arrow to indicate the direction of piston movement for each of the four engine strokes. 13. True or False: Duling the intake stroke. the piston moves down away from the valves. ":i 14. True or False: Duling the power strokj' the piston moves up toward the valves.. OBJECTIVE 10 Using illustrations of cylinders, sketch the intake valve in. the correct position for each of the four engine strokes. 15. Trtre or False: Duling the exhaust stroke. the intake WRITTEN TEST - CIMC - 1-20

16. True or False: During the intake stroke, the intake OBJECTIVE 11 Using illustrations of cylinders. sketch the exhaust valve in the correct position for each of the four engine strokes. 17. True or False: During the exhaust stroke, the exhaust OBJECTIVE 12 List the names of emission control systems. 18. Which of the followingis the name of an emission A. air conditioning system system C. fuel injection system D. positive crankcase ventilation system 19. Which of the followingis the name of an emission A. carburetor heat control system B. heated air induction system C. negative crankcase ventilation system D. oxygen injection system 20. Which of the followingis the name of an emission A. oxygen exhaust system B. catalytic control system C. carburetor control system D. air conditioning control system WRITTEN TEST - CIMC - 1-21