LINCOLN MACHINES: STICK WELDERS HANDY STICK 130 PART NO. K10421-3 The European made handy stick 130 inverter welder is a little dynamo able to get all your basic stick welding needs done in a flash. Offering excellent arc characteristics for both rutile and basic electrodes of up to 3.2Mm, handy stick 130 is complete with cable set so you will be ready to weld. Rec. Generator (@ max output) 5-130A 5-130 A@35% >8kVA Dimensions (mm) H x W x D 200 x 120 x 270 Net Weight (kg) 3.4 INVERTEC 150S PART NO. K12034-2-P Ready-To-Weld includes: welding leads, shield, hammer/brush & carry case. Robust Design: Unique rubber corners, metal housing & push control buttons to withstand tough environmental conditions. Built in CRD. Auto Adaptive Force for a stable arc with low spatter levels. Built in Hot Start for excellent arc striking. Lift TIG with excellent striking without tungsten contamination. Requires Tig Torch and Regulator for Tig Welding. Tig Torch Part No: PC9FV-4I 4m Torch PC9FV-8I 8m Torch Regulator Part No: 80130LKAR311 Argon Flow Meter 5-140A 140A @30% (40 C) 140A @ 55% (20 C) Dimensions (mm) H x W x D 244 x 148 x 365 Net Weight (kg) 6.7 I 9
LINCOLN MACHINES: STICK WELDERS INVERTEC 170S PART NO. K12035-2-P Ready-To-Weld includes: welding leads, shield, hammer/brush & carry case. Robust Design: Unique rubber corners, metal housing & push control buttons to withstand tough environmental conditions. Built in CRD. Auto Adaptive Force for a stable arc with low spatter levels. Built in Hot Start for excellent arc striking. Lift TIG with excellent striking without tungsten contamination. Requires Tig Torch and Regulator for Tig Welding. Tig Torch Part No: PC9FV-4I 4m Torch PC9FV-8I 8m Torch Regulator Part No: 80130LKAR311 Argon Flow Meter 10-160A 160A @35% (40 C) 160A @ 80% (20 C) Dimensions (mm) H x W x D 244 x 148 x 365 Net Weight (kg) 7 INVERTEC 270SX PART NO. K12040-2 The Invertec V270SX stick and Lift TIG welder utilises quality digital inverter technology to deliver excellent arc characteristics with a wide output range of 5-270 Amps. This welding equipment features a digital meter showing the presettable welding current, actual welding current or voltage during welding. The high duty cycle of the machine supports continuous stick welding with a wide variety of electrode types such as Rutile, Basic and even Cellulosic. The Lift TIG welding function incorporated in this machine allows easy starting without tungsten contamination. The Invertec V270SX comes with a built-in VRD (voltage reducing device) and combines a rugged industrial construction, excellent arc characteristics, wide output range and portability. Lead Kit Required Part No: KIT-250A-25-5M 5-270A Input/Phase/Voltage/Hertz Input Power 415V/3/50-60Hz 270A /30.8V @35% (40 C) 200A/28V @ 100% (40 C) 9.5kW @ 35% 6.3kW @ 100% Dimensions (mm) H x W x D 389 x 247 x 502 Net Weight (kg) 22 OTHER STICK WELDERS AVAILABLE TIG PACKAGES ALSO AVAILABLE FREE PHONE: 0508 677 704 I 10
LINCOLN MACHINES: TIG WELDERS INVERTEC V160-TP READY-TO-WELD PART NO. V160TP-PKG The Invertec V160-TP has all the features that you would expect from professional TIG welding equipment in a small, easy-to-handle package. Features include: 5 to 160 amp output from 240 volt input, selectable HF or lift TIG starting, 2T/4T trigger control, variable down slope and post flow control, digital preset amp meter with a hold function and built-in variable pulse. The variable high frequency pulse allows the welder to adjust the arc focus to suit the application reducing distortion and increasing travel speeds. For added safety, this inverter weldercomes with a built-in VRD increasing operator safety in environments with increased hazard of electric shock. The Ready-To-Weld package includes a stick welding kit and everthing to get you TIG welding fast. 5-160A 160A @ 35% 130A @ 100% Rec. Generator (@ max output) >8kVA Dimensions (mm) H x W x D 385 x 215 x 480 Net Weight (kg) 11.5 INVERTEC V205-T AC/DC READY-TO-WELD PART NO. V205TACDC-PKG The Invertec V205-T AC/DC TIG is ideal for critical AC or DC TIG welding applications combined with quality stick welding capabilities. Incorporating the very latest digital inverter welding technology, the machine combines an excellent 200A @ 40% duty cycle with the portability and flexibility provided by single-phase 240/115V power requirements.the 115/240V auto-reconnect makes the V205-T AC/DC truly flexible and the rugged, portable, lightweight design is ideal for shop or field environments. It can be simply changed to a water-cooled unit by adding the Coolarc 20. For added safety, this welding equipment comes with a built-in VRD (voltage reducing device). The Ready-to-weld package includes a stick welding kit and everything to get you TIG welding fast. 6-200A 200A @ 40% 140A @ 100% Rec. Generator (@ max output) 8kVA Dimensions (mm) H x W x D 380 x 210 x 480 Net Weight (kg) 17.6 I 11
LINCOLN MACHINES: MIG WELDERS POWER MIG 180C READY-TO-WELD PART NO. K2668-1 With the widest ouput in its class, the Power MIG 180C is ideal for the home handyman right through to the small fabrication and body repair shop. The continuous voltage control makes tuning in the perfect setting a breeze while Lincoln Electric\ s Diamond Core Technology makes for easy starts and a smooth, stable arc that reduces spatter and clean-up time. The Power MIG 180C makes it easy to get great results MIG welding steel, stainless or aluminum whether you are a novice or experienced welder. With included welding gun, welding accessories and consumables, this welding equipment gets you welding fast. 30-180 Amps DC 1.3-12.7 m/min 130A/20V/30% MAGNUM 100SG SPOOL GUN PART NO. K2532-1 10.7 Amps Dimensions (mm) H x W x D 357 x 258 x 472 Net Weight (kg) 30 REDI-MIG PLUS 215C READY-TO-WELD PART NO. K32061-11 The Magnum 100SG spool gun is the lowest cost way to add reliable and precise spool gun wire feeding performance for soft aluminum wire. Suitable for both novice and experienced operators. It s easy to set up, does not require a bulky outboard adapter/ power module and shares gun expendable parts with the standard MIG gun included with the Power MIG models. For added protection, the Magnum 100SG comes with a cushioned carrying case. Suits Power Mig 180 Welder. The REDI-MIG Plus 215c is a compact, single-phase MIG welding machine with integrated two-roll wire feeder. The REDI-MIG Plus 215c provides outstanding results on aluminium, stainless and mild steel, featuring a tight, crisp arc that is easy to start and control. The semi-synergic control and wide voltage sweet spot makes finding the right setting a breeze. This medium duty MIG welder is ideal for smash repair, sheetmetal, maintenance/repair and rural applications. 30-220 Amp 220A/25V @ 15% 130A/20.5V @ 60% 100A/19V @ 100% Dimensions (mm) H x W x D Solid 0.6 1.0mm Alum 0.9 1.2mm FCAW 0.9-1.2mm 15 Amps 765 x 427 x 850mm Net Weight (kg) 87 FREE PHONE: 0508 677 704 I 12
LINCOLN MACHINES: MIG WELDERS REDI-MIG PLUS 255C READY-TO-WELD PART NO. K32062-11 The REDI-MIG Plus 255c with built-in wire feeder delivers maximum grunt for a single phase MIG machine. The 12-step, semi-synergic voltage control makes finding the right setting a breeze, ensuring consistent quality welds with low spatter and less clean up. The REDI-MIG Plus 255c has an integrated wire feeder that delivers positive traction without crushing the wire, features tool-less wire change and accepts both 5kg and 15kg spool sizes. Ideal for large auto body repair, maintenance/repair and rural applications this MIG welding machine comes in Ready-to-weld package. 30-225 Amp 255A/26.8V @ 20% 150A/21.5V @ 60% 120A/20V @ 100% Dimensions (mm) H x W x D Solid 0.6 1.2mm Alum 0.9 1.2mm FCAW 0.9-1.2mm 25 Amps 765 x 427 x 850mm Net Weight (kg) 87 REDI-MIG PLUS 255S READY-TO-WELD PART NO. K32062-2-AUP The REDI-MIG Plus 255s delivers the same powerful 30-255 amp output as the 255c, but a separate 4s wire feeder provides the flexibility of working further away from the power source and features a four-roll wire drive system. 30-225 Amp 255A/26.8V @ 20% 150A/21.5V @ 60% 120A/20V @ 100% Dimensions (mm) H x W x D Net Weight (kg) Solid 0.6 1.2mm Alum 0.9 1.2mm FCAW 0.9-1.2mm 25 Amps 765 x 427 x 850mm (255s) 490 x 350 x 420mm (4s) 108 (255s) 15 (4s) I 13
LINCOLN MACHINES: MIG WELDERS POWERPLUS II 350 READY-TO-WELD PART NO. K32063-1-AUP The POWERPLUS II 350 is a heavy-duty three-phase machine with a generous output range of 50-400 amps, providing excellent duty cycle capabilities for increased productivity. The POWERPLUS II 350 includes Lincoln Electrics patented Diamond Core Technology which provides easy arc starting and a stable arc across the entire welding range for optimum performance. Infinitely variable voltage selection allows operators to dial in the exact weld setting required. Included in the package is the PWF-4GS wire feeder. Requires 3 Phase Plug 50-400 Amp 350A/31.5V @ 60% 270A/27.5V @ 100% Solid 0.6 1.2mm Alum 0.9 1.2mm FCAW 0.9-1.2mm 23.5 Amps Dimensions (mm) H x W x D 970 x 480 x 1000mm (350) 490 x 350 x 420mm (PWF-4GS) Net Weight (kg) 140 (350) 15 (PWF-4GS) POWERPLUS II 500 READY-TO-WELD PART NO. K32064-1-AUP The POWERPLUS II 500 is a three-phase MIG machine boasting a huge 60-550 Amp output range and has been designed to meet the most rigourous demands. Including such features as 2T/4T switching - ideal for long runs, gas pre-flow, crater control, burnback and energy saving mode the POWERPLUS II 500 allows maximum flexibility to provide maximum productivity. Supplied with a PWF-4GS separate wire feeder complete with 8 metre interconnection leads and Magnum 400 welding gun. Requires 3 Phase Plug 60-550 Amp 500A/39A @ 60% 390A/33.5V @ 100% Solid 0.6 1.6mm Alum 0.9 1.6mm FCAW 0.9-2.0mm 39.3 Amps Dimensions (mm) H x W x D 1000 x 555 x 1020mm (500) 490 x 350 x 420mm (PWF-4GS) Net Weight (kg) 180 (500) 15 (PWF-4GS) FREE PHONE: 0508 677 704 I 14
LINCOLN MACHINES: MULTI-PROCESS WELDERS INVERTEC V350-PRO PART NO. K1728-8 The Invertec V350-PRO is the most powerful portable inverter welding power source in its class. It utilises the optimum wave form for each welding process - Stick welding, TIG welding, MIG welding and flux-cored - with the ability to add an optional pulse MIG capability. This powerful piece of welding equipment will add significant flexibility to your welding operation, whether on-site or in the shop. 5-425 Amp 350A, 34V @ 60% 275A, 31V @ 100% Dimensions (mm) H x W x D 373 x 318 x 706 Net Weight (kg) 37 POWER WAVE C300 PART NO. K2865-1 The Power Wave C300 is a portable, multi-process welder with advanced welding technologies to deliver outstanding results. With built-in wire feeder and high-end functionality this unit offers Stick, DC TIG, Pulsed DC TIG, MIG, Pulsed MIG, and Flux-cored welding capabilities. The Power Wave C300 incorporates the next generation of lincoln s Waveform Control Technology TM Wire Feed Speed 60-550 Amp 500A/39A @ 60% 390A/33.5V @ 100% Dimensions (mm) H x W x D Net Weight (kg) Solid 0.6 1.6mm Alum 0.9 1.6mm FCAW 0.9-2.0mm 1000 x 555 x 1020mm (500) 490 x 350 x 420mm (PWF-4GS) 180 (500) 15 (PWF-4GS) I 15
LINCOLN MACHINES: MULTI-PROCESS WELDERS / WIRE FEEDERS SPEEDTEC 400S - MIG AND FLUX-CORED WELDER PART NO. K14053-1 The solution for Industrial Multi-process applications. With modular and compact design this welding set is easy to move around site and transport is trouble free thanks to the lower weight of this new design. With new inverter technology and 32 KHz inverter frequency, the arc is precisely controlled, many times faster than conventional analogue power sources. The electrical characteristics of the welding power can be changed by software in real time updates. A wide range of synergic programs are available as standard allowing simple yet precise control of welding parameters for the best results every time. With the LF 45 wire feed unit the welding set can support the MIG processes with synergic programs for Steel, Stainless Steel, Aluminium and Flux cored wires. Lift TIG and Stick functions are available as standard. Thanks to its user-friendly and clear user interface controls, operation of the Speedtec could not be easier - This machine is designed with the operator in mind. 5-400A (Stick/TIG) 20-400A (MIG) 400A /30.8V @80% (40 C) 400A/26V @80% (40 C) (Stick/Tig) 400A/34V @80% (40 C) (MIG) Dimensions (mm) H x W x D 476 x 305 x 600 Net Weight (kg) 50 WIRE FEEDERS LN-25 PRO WIRE FEEDER PART NO. KA2613-1A2 (with Magnum 400) or PART NO.KA2613-1A1 (with K126 Squirt Gun) Built upon the tradition and success of the LN -25, the new LN -25 PRO is designed to be simple, reliable and easy to service. The LN -25 PRO is ideal for field construction and fabrication, shipyards, and rental companies. The MAXTRAC wire drive enhances performance, while the replacement case-and many other upgrade options- can be installed in less than five minutes. Supplied with either Magnum 400 Mig Gun or K126 Squirt Gun. Wire Feed Speed 1.3-17.7m/min 325A/100% 450A/60% Solid 0.6 1.6mm Alum 0.9 1.6mm FCAW 0.8 2.4mm Dimensions (mm) H x W x D 381 x 203 x 558 Net Weight (kg) 16 FREE PHONE: 0508 677 704 I 16
LINCOLN MACHINES: WELDERS RANGER 250 GXT PART NO. K2923-1 Get all the extras needed for construction, maintenance and repair work, or getting projects done on rural properties. That s extra welding performance with 250amps for AC/DC stick or TIG, DC wire welding and extra power with up to 11,0000 watts peak for lights, grinders or high amperage equipment. You also get extra protection and quiet operation with the Lincoln enclosed case. RANGER 305D PART NO. K2922-1 The Ranger 305D is a powerful 300 amp, DC diesel, enginedriven welder designed for contractors, maintenance/repair and all other field-based welding professionals who demand the best welding arc. Lincoln Electric s Chopper technology delivers excellent arc characteristics whether you are in stock (conventional or pipe), TIG, MIG, or arc gouging modes of operation. Rugged and dependable, the Ranger 305D is built within a totally enclosed stainless steel robust case, which provides maximum protection for its 45 litre fuel tank and water cooled Kubota 18.8HP diesel engine. This portable powerhouse delivers 9,500 continuous (10,000 peak) watts, which gives enough power to run lights, tools, pump and weld all at the same time. Features: 2 x 240V single phase and 1 x 415V outputs. OTHER MODELS OF ENGINE DRIVES AVAILABLE! I 17