Slide ono Rail ain Index GSL Index Index... Page 01 A GSL Profiles Specification Pages... Page A02-06 Technical Information... Page A07-09 Scale Profile Drawings... Page A10-18 B GSL Accessories Photos & Drawings... Page B01-14 C GSL Sections Scale Elevations... Page C01-15 D GSL Statics... Page D01 E GSL Construction Drawings 1 - Outer Frame Assembly... Page E02 2 - Punch Tooling... Page E03-04 3 - Interlock Preparation... Page E05-06 4 - Drainage... Page E07 5 - Lock Preparation... Page E08 6 - Roller Preparation... Page E09 7 - id-rail Preparation... Page E10 8 - Sash Assembly... Page E11-14 9 - eeting Stile Preparation... Page E15 10 - Fixed Sash Installation... Page E16 F GSL Sawing Tables Cutting Information... Page F01-03
Slide ono Rail Specification GENERAL DESCRIPTION The Slide ono Rail system is suitable for patio doors which can be installed into timber sub frames or directly into traditional apertures and achieves excellent U values inline with the Building Regulations. The system is suitable for replacement doors in existing buildings and for installation into new buildings. Slide ono Rail uses a multi-point lock which locates into a stainless steel one piece keep. Assembly of the outer frame is with screw fixings through the head & cill into the jambs & sashes are screwed together around the glass and gasket. RECOENDED DESIGN LIITATIONS aximum Sash eight: aximum Sash Height: inimum Sash Height: aximum Sash idth: 100kg 2100mm 1000mm Providing sashes are within the above limitations there is no maximum width
Slide ono Rail Specification PROFILE SPECIFICATION The frames are constructed of aluminium alloy extrusion to BS EN 755-9 and BS EN 12020, extruded from 6060 T6 alloy. The internal and external extrusions are separated with a polyamide thermal break. The external aluminium alloy extrusion is pre-treated and finished either:- a) Anodised to BS 3987: 1987, grade AA25 to a natural self colour. b) Polyester powder organic coating to BS 6496. Dual colour is available. GENERAL ANUFACTURING Outer frames are made by cutting the head, cill and top of jamb profiles with accurate 90 square ends and by cutting the bottom of the jambs to an accurate 85 angle using Tungsten Carbide Tipped Saw Blades, operating at approximately 3000 rpm. The joints are made by drilling a Ø5.5mm hole in the 'V' groove of the head & cill and screwed together using PUA028 screws as shown in section E of this manual. All joints should be sealed using ACSIL04 sealant. The sash joints are made using self tapping stainless steel screws. The holes for which can be made using the relevant punch tooling shown in section E of this manual. All sash members are built around the glazing and gasket. On polyester powder coated finishes, great care should be taken to avoid getting gap sealer on visible surfaces and should be removed as soon as possible with a clean cloth. Care should be exercised when using products not supplied by Smart Systems Ltd as no responsibility can be accepted. arranties and performance may also be affected.
Slide ono Rail Specification DRAINAGE As with all dry glazed systems, it is recommended that the profiles are adequately drained and ventilated. Refer to drainage details in section E of this manual, if in doubt, ask the Technical Department. In order to get maximum performance and weather resistance it is recommended that drips are used over all vents. OUTER FRAE ANUFACTURING INFORATION Outer frames are made by cutting the head, cill and top of jamb profiles with accurate 90 square ends and by cutting the bottom of the jambs to an accurate 85 angle, measured to the longest point of the metal. Corners are formed by coating the cut faces to be joined with small gap sealant ACSIL04. The two ends are then brought together and fixed using a stainless steel self-tapper - PUA028 screws are shown in this manual. The small gap sealer ensures a permanent joint and guards against the ingress of moisture and joint movement. After joining the corners, special care should be taken to ensure any excess sealer is removed from painted surfaces. VENTS The glazing gasket should be wrapped around the unit and finished with a neat butt joint to the middle at the top of the unit. The joint should then be glued using a fast-acting sealant. Horizontal rails are coated with sealant ACSIL04 and tapped into position on the double glazed unit using a rubber mallet to avoid distorting the profile. Vertical profiles are then tapped into position using the same method. Any excess sealant should then be carefully removed. The joints are made using self tapping stainless steel screws. The holes for which can be made using the relevant punch tooling shown in section E of this manual.
Slide ono Rail Specification LOCKING The vertical members should be prepped for the locking mechanism prior to fabrication and fitted before assembly. Stainless steel fixings shall be used for securing the locking mechanism and keeps in position. GLAING Glass is secured in position using a wrap around gasket with the vent profiles assembled around the unit. Glazing can be 24mm, 28mm or 32mm by selecting the relevant gasket. Slide ono Rail eather Performance (BS6375-1) BS EN 1026: 2000 Air Permeability: BS EN 1027: 2000 atertightness: BS EN 12211: 2000 Resistance to ind Load: TBA TBA TBA Slide ono Rail U Values Please refer to the Smart Systems' Document L hite Paper or contact the Technical Department.
Slide ono Rail Specification
Slide ono Rail Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F GSL022 A10 418 160 7.20 4.13 6.5 1 A10 349 145 GSL030 5.30 2.64 6.5 1 GSL040 228 84 A11 6.5 1 1.67 0.93 GSL053 A11 - - - - 6.5 1 A B A12 464 91 GSL1110 9.45 1.19 6.5 1 A GSL1111 A12 478 70 B 8.74 1.53 6.5 1 A GSL1112 A12 459 107 B 8.92 3.09 6.5 1 GSL1120 A13 292 114 3.86 1.8 6.5 1 GSL1121 A13 289 108 4.66 1.79 A = Outside B = Inside 6.5 1 GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour
Slide ono Rail Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F A GSL1130 A14 653 271 B 6.03 11.27 6.5 1 GSL1131 A14 570 253 11.63 13.00 6.5 1 A15 91 44 GSL1140 - - 6.5 1 A15 171 70 GSL1141 - - 6.5 1 A15 193 74 GSL1142 - - 6.5 1 A15 156 57 GSL1143 - - 6.5 1 A15 260 73 GSL1144 - - 6.5 1 A16 - - GSL1145 PVC - - 6.5 1 GSL1146 A16 116 39 - - A = Outside B = Inside 6.5 1 GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour
Slide ono Rail Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F GSL1147 A16 95 58 - - 6.5 1 GSL1148 A16 296 78 6.5 1 - - GSL1155 A B A17 381 71 6.5 1 10.13 4.22 GSL1330 A18 170 83 7.38 3.83 6.5 1 GSL1335 A18 215 127 3.66 3.83 6.5 1 GSL310 A18 248 162 1.39 0.59 6.5 1 EF423 - - A12 PVC - - 7 1 VG52 PVC A19 - - - 6.5 1 VG53 STAINLESS STEEL A19 - - - A = Outside B = Inside 6.5 1 GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour
Slide ono Rail Primary Visible Side Secondary Visible Side GSL022 Locking Stile Section GSL030 41 38 70 20 20 44 20 73.5 id Rail ACGSL084 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side GSL040 eeting Stile Section 32 21 GSL053 33.5 30.5 13 PVC Interlock 29 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side GSL1110 Head Section 92.5 112 GSL1111 Jamb Section 92.5 EF423 PVC Cill Infill Section (Black Only) 28 GSL1112 Cill Section 49 27 33 13.5 92.5 102.5 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side GSL1120 Top & Bottom Rail 41 48.5 47.5 ACGSL084 44.5 GSL1121 Fixed Sash Stile 44 48.5 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side GSL1130 id-rail for Letter Plate GSL1131 id-rail 14 124 64.5 124 41 41 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side GSL1140 Head Guide Section GSL1141 Internal Head Clip Plate 17.5 17 14.5 10 21 51.5 GSL1142 Internal Jamb Clip Plate 54 10.5 16.5 GSL1143 External Jamb Clip Plate 36 GSL1144 Internal Cill Clip Plate 51.5 28.5 10 13 10 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side GSL1145 External PVC Clip Plate 8 86.5 GSL1146 Sash eather Bar GSL1147 External Cill Upstand 32 End Caps = ACGSL1146 Rivets = ACVL061 20 30 11 16.5 GSL1148 Internal Cill Clip Plate with Two oolpile Channels 56 30.5 10 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side GSL1155 Head Extension 36.5 35 92.5 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side GSL310 Interlock 45 20 20 35 GSL1330 Reinforced Interlock 36.5 End Caps = ACGSL1130 94 GSL1335 Reinforced Interlock 69.5 20 20 35 End Caps = ACGSL1135 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side VG52 PVC Infill (Black Only) 6 PVC VG53 Stainless Steel Track 5 12 Scale 1:1
Slide ono Rail Primary Visible Side Secondary Visible Side
Slide ono Rail Section B
Slide ono Rail Image Part Code Pack Unit Application Colour ACDV265 4 x 60 CSK Screw 100 pack GSL040 ACGSL1171 F GO ACET060 No. 7 x 25 S/S Self Tapping CSK Screw ACET068 No. 8 x 10 S/S Self Tapping Flange Screw 100 pack 100 pack F GO F GO ACET122 4 x 10 CSK Screw 100 pack GSL040 ACGSL1171 F GO ACET390 4.3 x 25mm Polyamide Screw 200 pack ACGSL1125 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour ACSL180 Cast Handle Set 1 pair GSL022 ACGSL1174 F GO ACSL181 Aluminium Handle Set 1 pair GSL022 ACGSL1174 F GO ACSL182 Dummy Handle Set for ACSL180 1 pair GSL022 ACGSL1174 F GO ACSL183 Dummy Handle Set for ACSL181 1 pair GSL022 ACGSL1174 F GO F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour ACGSL032 24mm Glazing Gasket 25 m GSL022 GSL030 GSL310 GSL1120 GSL1121 GSL1330 F GO ACGSL032G 24mm Glazing Gasket - Grey 25 m GSL022 GSL030 GSL310 GSL1120 GSL1121 GSL1330 F GO ACGSL033 28mm Glazing Gasket 25 m GSL022 GSL030 GSL310 GSL1120 GSL1121 GSL1330 F GO ACGSL033G 28mm Glazing Gasket - Grey 25 m GSL022 GSL030 GSL310 GSL1120 GSL1121 GSL1330 F GO ACGSL034 32mm Glazing Gasket 25 m GSL022 GSL030 GSL310 GSL1120 GSL1121 GSL1330 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour ACGSL034G 32mm Glazing Gasket - Grey 25 m GSL022 GSL030 GSL310 GSL1120 GSL1121 GSL1330 F GO ACGSL040 End Cap 1 each GSL040 F GO ACGSL042 oolpile 100 m GSL020 GSL021 GSL022 F GO ACGSL061 Infill Gasket 150 m GSL040 F GO ACGSL061G Infill Gasket - Grey 150 m GSL040 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour ACGSL080 Screw 100 pack GSL040 F GO ACGSL084 Screw 100 pack GSL020 GSL021 GSL021 CSL030 F GO ACGSL1120 Support block for fixed sash 10 pack GSL1120 F GO ACGSL1122 End Cap for GSL022 10 pack GSL022 F GO ACGSL1125 Sash Roller 1 each GSL1120 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour ACGSL1130 Infill Angle 1 pair GSL1130 F GO x 4 x 2 ACGSL1132 Cover Cap 10 pack GSL310 GSL1330 GSL1335 F GO ACGSL1146 End Caps for GSL1146 - eather Bar 50 pairs GSL1146 F GO 15 15 13 ACGSL1150 Fixing Bracket for Fixed Sash 10 pack F GO ACGSL1151 Fixed Sash Location Block 10 pack GSL1121 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour 15 5 95 ACGSL1152 Anti-Lift Block 50 pack GSL1110 GSL1120 F GO 13 4 25 18 4 25 ACGSL1170 Fixing Plate ACGSL1171 Fixing Plate for ACGSL1174 keep 12 each 10 each ACGSL1174 ACSG071 GSL040 ACDV265 ACGSL1174 ACET122 GSL040 F GO F GO F GO F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour ACSGL1174 ulti-point Lock Can be cut down to 600mm leaving two locking points 1 Each GSL022 ACSL180 ACSL181 F GO 34.5 1280 1410 600 20.5 T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour 5.5 9.9 Ø12.5 Ø9.9 ACGSL1180 Screw Cover Cap 100 pack ACGSL1174 ACET122 F GO ACGSL1330 End Cap for GSL1330 10 pairs GSL1330 F GO ACGSL1335 End Cap for GSL1335 10 pairs GSL1335 F GO ACGSL304 Guide to Locate Locking Stile to Outer Frame 2 pack GSL1111 GSL022 F GO J K L A D C ACGSL910 B H G F E ACGSL910 Punch Tool Please see Section E for application. 1 each F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour N O P Q V ACGSL911 U T S R ACGSL911 Punch Tool Please see Section E for application. 1 each GSL022 GSL1121 GSL310 GSL1330 GSL1335 F GO ACGSL9001 Drill Jig Please see Section E for application. 1 each GSL1110 GSL1111 GSL1112 F GO ACGSL9002 Drill Jig Please see Section E for application. 1 each GSL022 GSL310 GSL1330 GSL1335 F GO ACSG071 4 x 40 CSK Screw ACVG48 Door Stop/Buffer 1 each ACSG023 ACGSL1174 1 each F GO F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour AC01615 35/35 Cylinder 1 each ACGSL1174 F GO PUA028 No. 10 x 1" P/H Self Tapper 100 pack GSL1110 GSL1111 GSL1112 F GO F GO F GO F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour
Slide ono Rail Image Part Code Pack Unit Application Colour AC09700 1 each Alu. Polish F GO AC09761 1 each axi Gloss F GO AC09762 1 each Alu. Bright F GO AC09763 1 each Teflon Spray F GO AC09764 1 each axi Clean F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish = Dual Colour = Silver Anodised GO = Gold = Basic Colour = hite = Special Colour = Black
Slide ono Rail Image Part Code Pack Unit Application Colour AC09765 1 each Alu. Cleaner F GO AC09770 1 each Roll & rap 100mm F GO AC09775 1 each Grip Handwrap F GO AC09801 1 each Protective Tape 50mm F GO AC09802 1 each Protective Tape 70mm F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish = Dual Colour = Silver Anodised GO = Gold = Basic Colour = hite = Special Colour = Black
Slide ono Rail Image Part Code Pack Unit Application Colour AC09803 1 each Protective Tape 100mm F GO AC09830 1 each Rubber Sealant F GO ACSIL04 1 each Sealing Glue F GO ACSIL08 1 each Silicon Gun F GO ACSIL013 1 each Glue for itre F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish = Dual Colour = Silver Anodised GO = Gold = Basic Colour = hite = Special Colour = Black
Slide ono Rail Image Part Code Pack Unit Application Colour F GO F GO F GO F GO F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish = Dual Colour = Silver Anodised GO = Gold = Basic Colour = hite = Special Colour = Black
Slide ono Rail Section C 3 4 5 6 7 9 1 2 4 3 3 4 7 6 8 6 7 2 1 1 2
Slide ono Rail Detail 1A 41 28 14 GSL1120 72.5 15.5 8.5 48.5 GSL1146 End Caps = ACGSL1146 ACVL061 ACSH032 GSL1147 VG53 ACGSL1125 ACGSL042 EF423 GSL1144 ACET060 49 3 ACET068 GSL1112 92.5 GSL1145 102.5 Do Not Scale From This Drawing
Slide ono Rail Detail 1B 41 28 14 GSL1120 72.5 15.5 8.5 48.5 GSL1146 End Caps = ACGSL1146 ACVL061 ACSH032 GSL1147 VG53 ACGSL1125 ACGSL042 EF423 GSL1144 ACET060 49 3 ACET068 GSL1112 92.5 GSL1145 102.5 Do Not Scale From This Drawing
Slide ono Rail Detail 1C 41 28 14 GSL1120 72.5 15.5 8.5 48.5 GSL1146 End Caps = ACGSL1146 ACVL061 ACSH032 GSL1147 VG53 ACGSL042 ACGSL1125 EF423 GSL1148 ACET066 49 2 3 ACET068 GSL1112 92.5 GSL1145 102.5 Do Not Scale From This Drawing
Slide ono Rail Detail 2 28 72.5 14 15.5 8.5 48.5 GSL1112 VG53 GSL1120 EF423 ACGSL1120 ACET060 49 3 92.5 102.5 GSL1145 Do Not Scale From This Drawing
Slide ono Rail Detail 3 112 92.5 3 GSL1145 21 GSL1110 ACET068 ACET068 ACET068 33 ACGSL1152 69.5 ACGSL042 VG52 GSL1140 GSL1141 36.5 48.5 ACGSL042 14 GSL1120 28 41 Do Not Scale From This Drawing
Slide ono Rail Detail 4A 112 3 92.5 GSL1145 21 GSL1110 ACET068 ACET068 ACET068 69.5 33 ACGSL042 VG52 14 33 ACGSL1152 GSL1140 36.5 48.5 GSL1120 Do Not Scale From This Drawing
Slide ono Rail Detail 4B 112 92.5 GSL1155 21 GSL1110 ACET068 ACET068 ACET068 104.5 33 ACGSL1152 ACGSL042 VG52 14 35 36.5 48.5 ACET060 33 GSL1140 GSL1120 Do Not Scale From This Drawing
Slide ono Rail Detail 5 GSL1111 GSL1145 GSL1142 ACGSL042 ACSL18* 104 11.5 92.5 ACET060 ACGSL042 ACGSL1174 AC01615 (35/35 Cylinder) ACGSL1170 44 GSL022 14 3 19 73.5 92.5 Do Not Scale From This Drawing
Slide ono Rail Detail 6A 20 14 GSL310 45 11.5 45 28 ACET068 95.5 GSL053 GSL053 ACET068 GSL310 14 17.5 17.5 35 Do Not Scale From This Drawing
Slide ono Rail Detail 6B 20 14 GSL310 45 28 ACET068 GSL053 GSL053 145 ACET068 GSL1330 (End Cap = ACGSL1330) 14 18.5 18.5 36.5 Do Not Scale From This Drawing
Slide ono Rail Detail 6C 20 14 GSL310 45 28 ACET068 GSL053 120 GSL053 ACET068 GSL1335 (End Cap = ACGSL1335) 14 17.5 17.5 35 Do Not Scale From This Drawing
Slide ono Rail Detail 7 27 15.5 GSL1121 ACGSL042 28 ACET060 ACGSL1151 GSL1145 92.5 14 ACGSL042 GSL1143 64 GSL1111 28.5 3 Do Not Scale From This Drawing
Slide ono Rail Detail 8 44 28 ACGSL032 GSL022 GSL040 ACGSL042 17.5 8 ACET122 ACGSL061 73.5 20 14 ACGSL1170 ACDV265 5 73.5 152 ACGSL1171 AC01615 (35/35 Cylinder) ACGSL1170 GSL022 14 20 ACGSL032 28 44 Do Not Scale From This Drawing
Slide ono Rail Detail 9A 41 28 ACGSL032 20 70 GSL030 14 20 14 20 ACGSL032 28 41 Do Not Scale From This Drawing
Slide ono Rail 41 28 Detail 9B ACGSL032 GSL1130 14 20.5 124 14 20.5 ACGSL032 28 41 Do Not Scale From This Drawing
Slide ono Rail 41 28 Detail 9C ACGSL032 14 20.5 124 14 20.5 GSL1131 ACGSL032 28 41 Do Not Scale From This Drawing
Slide ono Rail Do Not Scale From This Drawing
Slide ono Rail Section D The wind load charts in this section are for guidance only. If in doubt, please contact the Technical Department
Slide ono Rail Interlock GSL310 H GSL310 H(cm) Ixx = 7.59 cm4 fmax = H/200 & H < 15 mm 300 290 280 270 260 250 240 230 220 210 200 190 180 170 160 150 140 130 120 110 100 (cm) 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 800 Pa 1000 Pa 1250 Pa 1500 Pa Do Not Scale From This Drawing
Slide ono Rail Interlock GSL310 H GSL1330 Ixx = 42.65 cm4 fmax = H/200 & H < 15 mm H(cm) 300 290 280 270 260 250 240 230 220 210 200 190 180 170 160 150 140 130 120 110 100 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 800 Pa 1000 Pa 1250 Pa 1500 Pa (cm) Do Not Scale From This Drawing
Slide ono Rail Interlock GSL310 H GSL1335 Ixx = 20.42 cm4 fmax = H/200 & H < 15 mm H(cm) 300 290 280 270 260 250 240 230 220 210 200 190 180 170 160 150 140 130 120 110 100 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 800 Pa 1000 Pa 1250 Pa 1500 Pa (cm) Do Not Scale From This Drawing
Slide ono Rail eeting Stile GSL022 H GSL040 GSL022 Ixx = 34.44 cm4 fmax = H/200 & H < 15 mm H(cm) 300 290 280 270 260 250 240 230 220 210 200 190 180 170 160 150 140 130 120 110 100 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 800 Pa 1000 Pa 1250 Pa 1500 Pa (cm) Do Not Scale From This Drawing
Slide ono Rail Do Not Scale From This Drawing