REFRIGERATION EffiCiENt by design
REFRIGERATION Superior vapor handling characteristics. For more than 35 years, Cornell Pump Company s innovative designs in containment system pumps have made us an industry leader. Our proven technologies in open drive pumps support thousands of successful installations in field. We also embrace new technologies, offering our popular hermitic pumps for more than a decade. Whichever system you choose, you ll have Cornell Pump s commitment to quality backing you. Cornell Pump s reputation for quality and reliability is celebrated worldwide. Our open drive pumps efficiency, U.S. manufacturing quality, outstanding durability, solids handlings capabilities, low NPSHR, inexpensive operation, and ready availability contribute to their popularity. PROdUCt interchangeability: CLOsE-COUPLEd Cb ANd hermetic ht PUMPs ARE dimensionally interchangeable with their CORREsPONdiNg sister PUMPs ANd with some COMPEtitivE hermetic PUMP LiNEs. Cornell Standard Series Cornell Hermetic series 1.5CBH-5-4 Dimensional interchangeability with 1.5HT-5-4 1.5CBH-7.5-4 Dimensional interchangeability with 1.5HT-7.5-4 2CB/CBS-3-4 Dimensional interchangeability with 2HT/HTS-3-4 2CB/CBS-5-4 Dimensional interchangeability with 2HT/HTS-5-4 2.5CBH-10-4 Dimensional interchangeability with 2.5HT-10-4 2.5CBH-15-4 Dimensional interchangeability with 2.5HT-15-4 3CB-10-6 Dimensional interchangeability with 3HT-10-6 3CB-15-6 Dimensional interchangeability with 3HT-15-6 PROvEN PERfORMANCE Cornell s liquid overfeed pumps have been used successfully in a variety of applications including cold storage, food processing, refrigeration, ice production and turbine inlet cooling. Cornell refrigerant pumps are commonly employed in liquid overfeed and transfer pump applications utilizing anhydrous ammonia, aqueous ammonia, and halocarbons such as R-22 and other approved refrigerants. *NEw seal tool improves bearing LifE Cb series - AMMONiA Cb series - flourocarbon Ammonia or Fluorocarbon 800-2200 RPM 1. 1.5CBH 2. 2CB 3. 2CBS 4. 2.5CBH 5. 3CB 6. 4CB
CLEAR LIQUID OVERFEED Enhanced vapor handling and NPSHR characteristics are central to Cornell s latest liquid overfeed pump innovations. Cornell has incorporated these designs features into our liquid overfeed pumps while maintaining two pole, four pole or six pole operating speed for close-coupled units. Since the introduction of our innovative refrigerant series of high head, low speed pumps, Cornell is working with our customers to address the increasing requirement for ultrareliability and superior performance characteristics. Cornell has You Covered The choice is yours: Cornell also offers hermetic style refrigeration pumps which have operating capabilities and dimensions similar to our standard CB pumps. The HT series is perfect for stable operating systems that have minimal vapor entrainment or cavitation issues. And with Cornell HT Series pumps you still get the advantage of low operating speed, better NPSH, experience, and an industry leading warranty. COMPARisON CURvE ANd ChARt COMPETITOR CORNELL 2HT CORNELL 2CB CORNELL s 2Cb ANd 2ht have superior NPshR Unattended Monitoring The CB series sealing technology consists of an evolutionary double mechanical seal design with a pressurized barrier fluid reservoir, fluid level indictor and limit switch. This configuration allows for unattended monitoring of fluid level and a safety shut down feature. The HT series has an optional shut down feature when packaged with the Hansen Pump Guardian system. The Pump Guardian uses a pressure cutout if the pump starts cavitating. This feature prevents the bearings from running dry by shutting the pump down when cavitation is sensed. ht series - AMMONiA ht series - flourocarbon Ammonia or Fluorocarbon 1000-3600 RPM 1.5HT 2HT 2HTS 2.5HT 3HT
CLEAR LIQUID OVERFEED COMMITMENT TO EXCELLENCE Cornell Pump Company proudly maintains its ISO 9001:2008 certification which validates that Cornell is in compliance with all necessary processes to meet customer requirements. The elements associated with ISO 9001:2008 certification include such areas as contract review, design and development, production, purchasing, quality control and service. select high EffiCiENCY PUMP MOdELs 8h - 88% EffiCiENt 6Rb - 89% EffiCiENt 5Rb - 86% EffiCiENt 4Rb - 85% EffiCiENt Cornell s refrigeration product group is not limited to liquid overfeed pump applications. Our clear liquid pumps are frequently used in cooling tower, chilled water, glycol, brine, condenser spray tree and many other HVAC applications. Cornell s clear liquid pumps are constructed entirely of iron or cast iron and fitted with bronze components. Many optional metalurgies are also available. Standard features include fully machined impellers, heavy duty shafts with replaceable shaft sleeves, and peripheral wear rings. transfer Pump Applications Cornell s refrigerant pumps are available for use in transfer applications and have been successfully used for compressor oil, liquid transfer systems, and booster pump applications. Whether you require a liquid overfeed or transfer pump, Cornell s engineers and technical sales personnel can provide you with expert application assistance. glycol Pump Applications In many refrigeration applications, secondary coolants such as ethylene and propylene glycols and brines are used as heat transfer media. The glycol or brine is cooled by the primary refrigerant and used to transfer heat without changing state. Cornell s clear liquids handling pumps are commonly used to recirculate these secondary coolants. The clear liquid pumps are rugged, extremely efficient and designed specifically for a long life of service. h-series R-sERiEs
CLEAR LIQUID ENERgY EffiCiENt PUMPs As energy costs rise, conservation and efficiency of operation become critical issues for end users striving to minimize expenses associated with energy consumption. Cornell pumps maintain superb hydraulic operating efficiencies and are coupled with energy efficient motors. The bottom line Cornell pumps cost less to operate. Cornell Pumps are designed to deliver best in class efficiency. Depending on operating hours, fuelant, and horsepower required, you can save up to $3,000 per year (or more) in energy costs. Cornell manufactures more than 60 clear liquid and non-clog pumps that meet or exceed optimum efficiency standards for centrifugal pumps. CC - Close coupled F- Frame mount VM - Vertical Close Coupled VF - Vertical Frame Mount Y-sERiEs w-series
PROd interchan The HT and C dimensionally inte like models and si perform FEATURES & BENEFITS CORNELL hermetic REfRigERANt PUMP specifications hermetic, Close-coupled Refrigerant Pump: Class 150 Flanged suction and discharge 250 PSIG working pressure Constructed of ASTM A536 60-40-18 Ductile Iron Industry leading three year warranty Two pole (3000/3600RPM) operating speed Four pole (1800/1500RPM) operating speed Six pole (900/1200RPM) operating speed Motor Specification: Totally enclosed, liquid cooled 3/4 Flanged liquid coolant recirculation connection with NPT tap Varied voltages available Stainless Steel motor liner 200 C thermal protection Secondary containment Replaceable hydrodynamic motor bearings Suitable for VFD applications hermetic technology Allows the pump to operate without the need for a mechanical shaft seal NPshR Exceptional NPSHR characteristics Characteristics are enhanced throughout the entire operating range due to the single stage impeller and 1800 RPM operating speed vapor handling Enhanced vapor handling abilities IMPROVED NSPR at 1800 RPM VERSUS OTHER PUMPS OPERATING AT 3600 RPM
FEATURES & BENEFITS UCt geability B Series are rchangeable with milar in operating ance. REfRigERANt EMissiON free sealing technology A reliable system consisting of two mechanical seals mounted back to back Inboard seal prevents escape of refrigerant from the pump casing Outboard seal acts as a fail-safe or backup, and provides containment of a system compatible barrier fluid Solids handling capability up to 3/8 inch Thousands of installations - many still running original Cornell equipment from the 1960s NPshR Exceptional NPSHR characteristics Characteristics are enhanced throughout the entire operating range due to the single stage impeller and four pole operating speed vapor Entrainment Seals are oil lubricated, and do not rely on the presence of pumpage for lubrication or cooling The double mechanical sealing system allows the pump to continue to run until the system stabilizes and the pump re-primes itself nuisance-tripping is avoided CORNELL OPEN-dRivE REfRigERANt PUMP specifications Close-coupled Refrigerant Pump: Class 150 Flanged suction and discharge 250 PSIG working pressure Constructed of ASTM A536 60-40-18 Ductile Iron Industry leading three year warranty Four pole (1800/1500RPM) operating speed Six pole (1800/1500RPM) operating speed Optional mounting configurations available Mechanical seal: Double mechanical shaft seal with pressurized barrier fluid lubrication system Low oil limit switch Seal chamber heater to maintain proper barrier oil viscosity Motor Specification: Totally enclosed, fan cooled, refrigerant atmosphere, hostile environment, premium efficiency motor Class F insulation Suitable for VFD applications MADE IN THE U.S.A.
FOR CENTER PIVOT IRRIGATION STANDARD SPECIFICATIONS Models Available - 4NNT, 6NNT, 8NNT, etc. Discharge Sizes Available - 4 to 8 inch Standard Construction - Cast Iron, Class 30 Optional Construction - 316SS, CD4MCU, Ductile Iron Permco hydraulic drive FEATURES BENEFITS Various adaptor plates available for hydraulic motor fit Heavy duty shaft / bearing frame assembly Heavy duty wet end construction Manufactured in the United States PERFORMANCE CHARACTERISTICS Premium Hydraulic Efficiencies, 76 to 80% BEP 3 inch or larger solid handling capability Total Dynamic Head: 50 to 360 feet Capacity: 200 to 7000 GPM TYPICAL MARKETS General Agriculture, Industrial and Municipal Applications Rental Applications Mining Applications Flood Control Applications Construction / Dewatering Applications STX SERiES SELf-PRiMiNg PUMPS Cornell has redesigned our popular self-priming line have the best efficiencies in the industry. Combined with our patented-cycloseal back plate technology, the pump is durable, powerful, and energy efficient. THE STX series, unveiled in fall 2012, will eventually encompass more than 20 discharge configurations. The new design builds on our prominence in providing world class pumps, and allows the new STX to operate in extremely heavy duty situations, while increase efficiencies more than XX% of competitors average. Those efficiencies could translate into tens of thousands of dollars saved in fuel and maintenance expenses over the life of the pump. Specially designed removable rotating assembly allows the new Cornell piece to retrofit with other manufactures pumps. Cornell Pump Company Clackamas, OR 97015 USA www.cornellpump.com P: +1 (503) 653-0330 f: +1 (503) 653-0338 The ImmersIble motor ConCepT: Immersible motors are designed to be used in Dry-Pit applications where there is a possibility of flooding. Why take a submersible motor that was designed to run submerged 100% of the time and modify it to run in air 99% (or most of the time) and submerged 1% of the time (in case of a flood)? This seems backwards. The correct approach is to take a TEFC motor that is designed to run in air 100% of the time and adapt it to run submerged 1% of the time (in case of a flood). Immersible Motor Basic design: The basic design of the immersible pump/motor incorporates a premium efficient, inverter duty, P-Base or C-Face TEBC motor (totally enclosed, blower cooled). The motor, as the name implies, is totally enclosed and cooled by a blower on top of the motor. If the motor becomes submerged, the blower motor fan shuts down without affecting the main motor. While the motor is temporarily submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor by utilizing a triple redundant sealing system, including a patented Hydroseal design. The motor-end bell housing incorporates the inverted cup principle, which traps an air bubble under the motor as water rises, thus keeping water away from the shaft seal. The shaft is fitted with a hydroseal, which expells water and further reduces the chance of water reaching the shaft seals. The Immersible motor can withstand up to 30 feet of submergence depth for a two-week period. This exceeds the requirements of Immersible motors that is described in the industry standard Index of Protection IP67. Competive designs only allow immersion of the motor for a period of time not exceeding 30 minutes at a submergence level of 3 feet. Hardly enough time to deal with any kind of flooding emergency! // 16261 SE 130th AVE CLACKAMAS, OR 2013 ALL RIGHTS RESERVED EffiCiENt by design HYDRAULIC FRACTURING MINING PUMPS DESIGNED FOR COARSE ABRASIvES market and product line AGRICULTURE FOOD PROCESS INDUSTRIAL MINING MUNICIPALITIES REFRIGERATION WATER TRANSFER AGRICULTURAL FOOD PROCESS INDUSTRIAL MINE DEWATERING MUNICIPAL REFRIGERATION WATER TRANSFER CHOPPER CUTTER PUMPS END GUN BOOSTER PUMPS HYDRAULIC SUBS HYDRO TURBINE Cornell pump CompAnY IMMERSIBLE MANURE MP SERIES CHOPPER CUTTER EDGE TM HYDRAULIC SUBS HYDRO TURBINE IMMERSIBLE MANURE MP SERIES MX SERIES REDI-PRIME STX SERIES ENhANCEd SELf-PRiMiNg PUMPS CORNELL COMPANY SLURRY PUMPS SUBMERSIBLES EFFICIENT. RELIABLE. TROUBLE-FREE cornellpump.com copyright, cornell pump company, 2012 MX SERIES REDI-PRIME STX SLURRY SUBMERSIBLE Cycloseal, and Redi-Prime are Registered Trademarks of Cornell Pump Company. Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications. Cornell Pump Company 16261 SE 130th Ave Clackamas, OR 97015 P: (503) 653-0330 F: (503) 653-0338 cornellpump.com 2013 cornell pump company