SHIPPING ROPS TØNSBRG
urorope marine AS quality assurance urorope Marine is the continuation of ScanRope Marine. urorope Marine is a well-known and highly trusted supplier of mooring ropes and accessories to the marine industry. The company's main credentials remain the renowned product range Karat, the experienced staff, and the high degree of service we provide. The name change is the final stage in a transition that started in 2004 when the company became part of UROROP S.A., one of urope's largest and most dynamic rope manufacturers. urorope Marine's highly skilled staff based in Tønsberg, Norway, has a reputation for friendly service and a fundamental understanding of the shipping companies' needs. Karat mooring ropes are therefore stocked at strategic ports throughout the world, including Rotterdam, Aberdeen, Houston, Singapore and Dubai. Furthermore, quality wire ropes and rope accessories are procured from approved manufacturers to ensure our customers a complete range of marine ropes and hardware. urorope Marine is certified according to NS-N ISO 9001:2008 KARAT WINCHline KARAT MAXI Plus identification urorope Marine has implemented ID marking on all KARAT fibre rope products, both mooring ropes and tails. ach mooring rope or tail has a stainless ID-tag with an individual four or five digit number. This number is also endorsed on the corresponding individual works certificate. The ID-tag is located in the splice of the mooring rope or tail (one ID-tag per eye splice) and with the urorope Marine's ID-marking system, keeping record of rope performance and age will be an easy task. All Karat rope manufacturing takes place at a large and ultra-modern manufacturing plant in Thiva, Greece. The factory was built in 2002 and has achieved its goal of high efficiency and unsurpassed quality. For our customers this means receiving reliable products at competitive prices delivered to the agreed destination at the agreed time. The ID number on the stainless tag corresponds with the last four or five digits of the certificate number. * Diameter, weight and MBL (as well as other mechanical and physical properties) are determined according to ISO 2307:2010. The MBL refers to the breaking strength of the fiberrope/wirerope itself, without splices or any other kind of termination that can be made with or without the use of accessories/fittings.
Karat maxi plus Karat maxi plus tails 8-STRAND KARAT MAXI has become standard terminology in high quality mooring applications. Very high strength/weight ratio allows substantial size reductions and ease in handling, as well as providing excellent overall economy. The new KARAT MAXI PLUS ropes have the same properties but offer a higher MBL and much better abrasion resistance. The new KARAT MAXI PLUS is DNV Type approved. Highest strength of the conventional permanently floating mooring ropes No loss of strength when wet High energy absorption Very low snap-back effect Manufactured according to ISO and OCIMF Stalon is a polyester/polypropylene melt mixture urolefin in the outer yarn 88 112 120 128 1 66 97 115 1 157 181 206 2 2 291 1 9 463 5 630 4 823 929 kn Tonnes 221 22,5 278 28,3 3 35,1 411 41,9 3 49,2 0 57,1 6 65,6 731 74,5 827 84,3 927 94,5 1033 105,3 11 116 1243 126,7 14 141,1 1637 166,9 1833 1 2111 215 2418 246 27 2 3102 316 8-STRAND urorope Marine supplies a wide range of KARAT MAXI PLUS mooring tails to suit different dimensions steel wire mooring ropes. We can offer both single leg TAILS and double leg endless RINGTAILS. Mooring tails are typically supplied in lengths of 11 m with 2,0 m and 1,0 m covered eyes. Studies performed by OCIMF have indicated tail lengths of 22 m for exposed berths. Because synthetic ropes are likely to deteriorate more rapidly than wire ropes, tails should be at least 25% stronger than Steel wire rope 6xWS+IWRC MBL, T 42,9 82,4 92,3 103,0 114,0 126,0 1,0 Required MBL for tail, T 91,1 103,0 115,4 128,8 142,5 157,5 1,5 the steel wire ropes to which they are attached (NOT: +37% for Nylon). The mooring tails should be inspected frequently and replaced at regular intervals. (18 months as per OCIMF recoendations). See below tables with MBL for typical dia steel wire mooring ropes construction 6xWS+IWRC (steel core) tensile 19 N/ 2. The tables also provide strength calculations for selecting suitable dia KARAT MAXI TAILS or RINGTAILS. Karat Tails MBL, T kg 88 94,5 105,3 116,0 141,1 166,9 166,9 1,0 46 Karat Ringtails MBL, T kg 105 105 119 135 151 1 186 41 55 63 71 81 Melting point: 185 C Spec. Gravity: 0,99 Water absorption: 0% Reduction of MBL when wet: 0% Bending Ratio, Dynamic ISO 3730 9:1 longation, new rope: 18% longation, broken-in ropes (15-20 operations) 11% On request: larger diameter, different color, 12 strand Steel wire rope 6xWS+IWRC MBL, kn 42 715 7 905 1010 1117 12 13 Required MBL for tail, kn 894 1009 1131 1263 13 15 1690 Karat Tails MBL, kn kg 88 927 1033 11 14 1637 1637 1833 46 Karat Ringtails MBL, kn kg 1037 1037 1178 13 1493 16 1833 41 55 63 71 81
Tønsberg mooringlink mandal fairleadshackle Tønsberg Mooring Link - galvanised steel mooring link of compact design typically utilised as connection between wire rope and fibre tail. Available in three sizes 90 T, 120 T and 1 T. 300 T can be supplied on special request. Mandal Fairlead Shackle - Stainless steel mooring shackle with sleek shape designed to pass through fairleads. Available in two sizes 90 M and 120 M. Link 90 T Tail - A = 285 B = 115 C = 1 D = 65 = 75 R = 22 90 tonnes 45 tonnes : 11,2 kg Link 120 T Tail - A = 4 B = 142 C = 150 D = 75 = 90 R = 28 120 tonnes tonnes : 16,9 kg Link 1 T Tail 88-112 A = 350 B = 184 C = 1 D = 85 = 120 R = 30 1 tonnes 90 tonnes : 25 kg C A ach link is proof tested and certified by DNV. DNV Type Approval. R B Shackle 90 M Tail - A = 255 B = 97 C = 120 D = 65 = 67 F = 100 R = 90 tonnes 45 tonnes : 7,8 kg Shackle 120 M Tail - A = 300 B = 121 C = 130 D = 82 = 90 F = 128 R = 120 tonnes tonnes : 13,3 kg D D F C A ach shackle is proof tested and certified by DNV. DNV Type Approval. B Fibre rope around the bolt, wire rope around the body. B Tønsberg Mooring Link with roller Opening Roller dia.d 120 T 90 82 2,1 kg 1 T 120 97 4,5 kg D Tønsberg Mooring Link 300T A = 7 B = 216 C = 190 D = 110 = 146 R = 300 tonnes Safe working load: 100 tonnes : kg With Works certificate C R D A Tønsberg Mooring link Mandal Fairlead shackle Key spanner
KARAT WINCHline BUOYANT WINCHline 6-STRAND KARAT WINCHline combines the unique characteristics of the high strength KARAT -fibres with a 6-strand wire rope lay construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and Nylon multifilaments. KARAT WINCHline is designed to be used on self tensioning winches and is DNV Type Approved. High resistance to deformation No crushing or jaing on winch xcellent fatigue properties giving longer lifetime High strength gives better safety Maintenance free 6-STRAND BUOYANT WINCHline is a unique fibre rope with a 6-strand wire rope lay construction. The outer layer of each strand comprises a special combination of Nylon monofilaments and PP multifilaments. BUOYANT WINCHline is designed to be permanently floating and to be used on self tensioning winches. Light weight - floats High resistance to deformation No crushing or jaing on winch xcellent fatigue properties giving longer lifetime High strength gives better safety Maintenance free 78 121 1 169 197 225 257 290 5 375 1 kn Tonnes 4 33 412 42 491 50 530 54 657 67 706 4 82 922 94 1059 108 1157 118 12 126 99 115 137 161 1 214 2 2 309 1 kn Tonnes 308 31,4 391 39,9 466 47,5 503 51,3 625 63,7 671,4 7 77,9 8 89,3 1007 102,6 1174 119,7 Melting point 250 C Spec. Gravity 1,1 Water absorption 2% Reduction of MBL when wet 1% Bending Ratio, Dynamic ISO 3730 12:1 longation, new rope: 25% longation, broken-in ropes (15-20 operations) 18% Melting point 250/165 C Spec. Gravity 0,99 Water absorption 2% Reduction of MBL when wet 1% Bending Ratio, Dynamic ISO 3730 12:1 longation, new rope 23% longation, broken-in ropes (15-20 operations) 15%
dynamax dynamax PLUS 12- STRAND Twelve strand braided rope, made from DYNMA HMP grade SK 75, has the highest strength to weight ratio in the current range of braided ropes. Light weight floats High strength similar, size for size, to wire rope Torque balanced 12 strand braided construction Abrasion resistant polyurethane coating 12- STRAND Twelve strand braided rope, made from DYNMA HMP grade SK 75, with a braided jacket of polyester. This gives a compact, round rope with a circular cross section and good spooling qualities. High strength/weight ratio Very low elongation Balanced construction 6 8 10 12 14 16 18 20 22 24 26 28 30 2,3 3,9 5,8 8,3 11,3 14,7 18,6 23,0 27,8 33,2 39,0 45,2 51,9 59,0 63,9 71,4 79,9 88,2 106,7 126,5 Tonnes 4 6 9 13 18 23 26 29 61 71 81 92 100 112 125 1 153 167 Dynamax Plus with Polyester jacket is manufactured for applications where heavy abrasion is expected. Polyester has low friction against steel. For special applications our Dynamax Plus can be manufactured with other type of jackets (dyneema, composite, etc.). 8 10 12 14 16 18 20 22 24 26 28 30 42 6,0 9,0 13,0 18,0 23,0 29,6,0,0,4 61,0 71,0 81,0,0 92,0 105,0 105,3 117,9 129,6 1,9 174,6 204,3 239,4 255,6 293,4 Tonnes 5,5 8,2 11,9 16,4 21 27,9,1 47,5 55,7,8 73,9 79,4 84 95,8 106,8 119,6 131,4 147 159,1 175,4 188 205 221 Melting point 135 C Spec. Gravity 0,97 Water absorption 0% Reduction of MBL when wet 0% Bending Ratio, Dynamic ISO 3730 9:1 longation, new rope 5% longation, broken-in ropes (15-20 operations) 3% On request, larger diameter, different. color, 12 strand Melting point 265 / 135 C Spec gravity 1,06 Water absortion 0% Reduction of MBL when wet 0% Bending ratio, Dynamic ISO 3730 9:1 longation, new rope 5% longation, broken-in ropes (15-20 operations) 3%
stock points Please direct all enquiries for KARAT MAXI PLUS to the sales office in Tønsberg, Norway, from where worldwide stocks are handled. urorope Marine AS Stensarmen 9 I N-3112 Tønsberg, Norway. P: +47 46 88 30 : mailbox@euroropemarine.no